git
7 years agoMerge branch 'js/regexec-buf' into maint
Junio C Hamano [Fri, 28 Oct 2016 16:01:12 +0000 (09:01 -0700)] 
Merge branch 'js/regexec-buf' into maint

A follow-up to an already graduated topic.

* js/regexec-buf:
  configure.ac: improve description of NO_REGEX test

7 years agoMerge branch 'rs/c-auto-resets-attributes' into maint
Junio C Hamano [Fri, 28 Oct 2016 16:01:11 +0000 (09:01 -0700)] 
Merge branch 'rs/c-auto-resets-attributes' into maint

When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
This is a small optimization to already graduated topic.

* rs/c-auto-resets-attributes:
  pretty: avoid adding reset for %C(auto) if output is empty
  pretty: let %C(auto) reset all attributes

7 years agoMerge branch 'yk/git-tag-remove-mention-of-old-layout-in-doc' into maint
Junio C Hamano [Fri, 28 Oct 2016 16:01:10 +0000 (09:01 -0700)] 
Merge branch 'yk/git-tag-remove-mention-of-old-layout-in-doc' into maint

Shorten description of auto-following in "git tag" by removing a
mention of historical remotes layout which is not relevant to the
main topic.

* yk/git-tag-remove-mention-of-old-layout-in-doc:
  doc: remove reference to the traditional layout in git-tag.txt

7 years agodoc: remove reference to the traditional layout in git-tag.txt
Younes Khoudli [Thu, 20 Oct 2016 13:21:44 +0000 (15:21 +0200)] 
doc: remove reference to the traditional layout in git-tag.txt

This is the only place in the documentation that the traditional layout
is mentioned, and it is confusing. Remove it.

* Documentation/git-tag.txt: Here.

Signed-off-by: Younes Khoudli <younes.khoudli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoMerge tag 'l10n-2.10.0-rnd2.4' of git://github.com/git-l10n/git-po into maint
Junio C Hamano [Mon, 17 Oct 2016 20:27:38 +0000 (13:27 -0700)] 
Merge tag 'l10n-2.10.0-rnd2.4' of git://github.com/git-l10n/git-po into maint

l10n-2.10.0-rnd2.4

* tag 'l10n-2.10.0-rnd2.4' of git://github.com/git-l10n/git-po:
  l10n: de.po: translate 260 new messages
  l10n: de.po: fix translation of autostash
  l10n: ru.po: update Russian translation

7 years agoMerge branch 'russian-l10n' of https://github.com/DJm00n/git-po-ru
Jiang Xin [Sun, 16 Oct 2016 12:11:41 +0000 (20:11 +0800)] 
Merge branch 'russian-l10n' of https://github.com/DJm00n/git-po-ru

* 'russian-l10n' of https://github.com/DJm00n/git-po-ru:
  l10n: ru.po: update Russian translation

7 years agol10n: de.po: translate 260 new messages
Ralf Thielow [Wed, 12 Oct 2016 16:31:13 +0000 (18:31 +0200)] 
l10n: de.po: translate 260 new messages

Translate 260 new message came from git.pot updates in 9fa976f (l10n:
git.pot: v2.10.0 round 1 (248 new, 56 removed)) and 5bd166d (l10n:
git.pot: v2.10.0 round 2 (12 new, 44 removed)).

Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias Rüster <matthias.ruester@gmail.com>
7 years agoStart preparing for 2.10.2
Junio C Hamano [Tue, 11 Oct 2016 21:24:02 +0000 (14:24 -0700)] 
Start preparing for 2.10.2

Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoMerge branch 'jk/verify-packfile-gently' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:21:35 +0000 (14:21 -0700)] 
Merge branch 'jk/verify-packfile-gently' into maint

A low-level function verify_packfile() was meant to show errors
that were detected without dying itself, but under some conditions
it didn't and died instead, which has been fixed.

* jk/verify-packfile-gently:
  verify_packfile: check pack validity before accessing data

7 years agoMerge branch 'jc/worktree-config' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:21:17 +0000 (14:21 -0700)] 
Merge branch 'jc/worktree-config' into maint

"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting.  The command has been taught to read the
default set of configuration variables to correct this.

* jc/worktree-config:
  worktree: honor configuration variables

7 years agoMerge branch 'jc/verify-loose-object-header' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:21:03 +0000 (14:21 -0700)] 
Merge branch 'jc/verify-loose-object-header' into maint

Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected.  H/t to Gustavo Grieco for reporting.

* jc/verify-loose-object-header:
  unpack_sha1_header(): detect malformed object header
  streaming: make sure to notice corrupt object

7 years agoMerge branch 'rs/git-gui-use-modern-git-merge-syntax' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:20:37 +0000 (14:20 -0700)] 
Merge branch 'rs/git-gui-use-modern-git-merge-syntax' into maint

The original command line syntax for "git merge", which was "git
merge <msg> HEAD <parent>...", has been deprecated for quite some
time, and "git gui" was the last in-tree user of the syntax.  This
is finally fixed, so that we can move forward with the deprecation.

* rs/git-gui-use-modern-git-merge-syntax:
  git-gui: stop using deprecated merge syntax

7 years agoMerge branch 'kd/mailinfo-quoted-string' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:20:31 +0000 (14:20 -0700)] 
Merge branch 'kd/mailinfo-quoted-string' into maint

An author name, that spelled a backslash-quoted double quote in the
human readable part "My \"double quoted\" name", was not unquoted
correctly while applying a patch from a piece of e-mail.

* kd/mailinfo-quoted-string:
  mailinfo: unescape quoted-pair in header fields
  t5100-mailinfo: replace common path prefix with variable

7 years agoMerge branch 'pb/rev-list-reverse-with-count' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:20:05 +0000 (14:20 -0700)] 
Merge branch 'pb/rev-list-reverse-with-count' into maint

Doc update to clarify what "log -3 --reverse" does.

* pb/rev-list-reverse-with-count:
  rev-list-options: clarify the usage of --reverse

7 years agoMerge branch 'jc/blame-abbrev' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:19:52 +0000 (14:19 -0700)] 
Merge branch 'jc/blame-abbrev' into maint

Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.

* jc/blame-abbrev:
  blame: use DEFAULT_ABBREV macro

7 years agoMerge branch 'jk/graph-padding-fix' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:19:03 +0000 (14:19 -0700)] 
Merge branch 'jk/graph-padding-fix' into maint

The "graph" API used in "git log --graph" miscounted the number of
output columns consumed so far when drawing a padding line, which
has been fixed; this did not affect any existing code as nobody
tried to write anything after the padding on such a line, though.

* jk/graph-padding-fix:
  graph: fix extra spaces in graph_padding_line

7 years agoMerge branch 'sg/ref-filter-parse-optim' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:18:57 +0000 (14:18 -0700)] 
Merge branch 'sg/ref-filter-parse-optim' into maint

The code that parses the format parameter of for-each-ref command
has seen a micro-optimization.

* sg/ref-filter-parse-optim:
  ref-filter: strip format option after a field name only once while parsing

7 years agoMerge branch 'rs/copy-array' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:18:32 +0000 (14:18 -0700)] 
Merge branch 'rs/copy-array' into maint

Code cleanup.

* rs/copy-array:
  use COPY_ARRAY
  add COPY_ARRAY

7 years agoMerge branch 'dt/mailinfo' into maint
Junio C Hamano [Tue, 11 Oct 2016 21:17:52 +0000 (14:17 -0700)] 
Merge branch 'dt/mailinfo' into maint

* dt/mailinfo:
  add David Turner's Two Sigma address

7 years agoconfigure.ac: improve description of NO_REGEX test
Jakub Narębski [Fri, 7 Oct 2016 11:30:52 +0000 (13:30 +0200)] 
configure.ac: improve description of NO_REGEX test

The commit 2f8952250a ("regex: add regexec_buf() that can work on a
non NUL-terminated string", 2016-09-21) changed description of
NO_REGEX build config variable to be more neutral, and actually say
that it is about support for REG_STARTEND.  Change description in
configure.ac to match.

Change also the test message and variable name to match.  The test
just checks that REG_STARTEND is #defined.

Issue-found-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoGit 2.10.1 v2.10.1
Junio C Hamano [Mon, 3 Oct 2016 20:24:18 +0000 (13:24 -0700)] 
Git 2.10.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoMerge branch 'jk/ident-ai-canonname-could-be-null' into maint
Junio C Hamano [Mon, 3 Oct 2016 20:22:32 +0000 (13:22 -0700)] 
Merge branch 'jk/ident-ai-canonname-could-be-null' into maint

In the codepath that comes up with the hostname to be used in an
e-mail when the user didn't tell us, we looked at ai_canonname
field in struct addrinfo without making sure it is not NULL first.

* jk/ident-ai-canonname-could-be-null:
  ident: handle NULL ai_canonname

7 years agoMerge branch 'jk/doc-cvs-update' into maint
Junio C Hamano [Mon, 3 Oct 2016 20:22:25 +0000 (13:22 -0700)] 
Merge branch 'jk/doc-cvs-update' into maint

Documentation around tools to import from CVS was fairly outdated.

* jk/doc-cvs-update:
  docs/cvs-migration: mention cvsimport caveats
  docs/cvs-migration: update link to cvsps homepage
  docs/cvsimport: prefer cvs-fast-export to parsecvs

7 years agoMerge branch 'jk/pack-tag-of-tag' into maint
Junio C Hamano [Mon, 3 Oct 2016 20:22:13 +0000 (13:22 -0700)] 
Merge branch 'jk/pack-tag-of-tag' into maint

"git pack-objects --include-tag" was taught that when we know that
we are sending an object C, we want a tag B that directly points at
C but also a tag A that points at the tag B.  We used to miss the
intermediate tag B in some cases.

* jk/pack-tag-of-tag:
  pack-objects: walk tag chains for --include-tag
  t5305: simplify packname handling
  t5305: use "git -C"
  t5305: drop "dry-run" of unpack-objects
  t5305: move cleanup into test block

7 years agoref-filter: strip format option after a field name only once while parsing
SZEDER Gábor [Sun, 2 Oct 2016 16:35:11 +0000 (18:35 +0200)] 
ref-filter: strip format option after a field name only once while parsing

When parse_ref_filter_atom() iterates over a list of valid atoms to
check that a field name is one of them, it has to strip the optional
colon-separated format option suffix that might follow the field name.
However, it does so inside the loop, i.e. it performs the exact same
stripping over and over again.

Move stripping the format option suffix out of that loop, so it's only
performed once for each parsed field name.

Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agopretty: avoid adding reset for %C(auto) if output is empty
René Scharfe [Thu, 29 Sep 2016 18:13:05 +0000 (20:13 +0200)] 
pretty: avoid adding reset for %C(auto) if output is empty

We emit an escape sequence for resetting color and attribute for
%C(auto) to make sure automatic coloring is displayed as intended.
Stop doing that if the output strbuf is empty, i.e. when %C(auto)
appears at the start of the format string, because then there is no
need for a reset and we save a few bytes in the output.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoPrepare for 2.10.1
Junio C Hamano [Thu, 29 Sep 2016 23:51:09 +0000 (16:51 -0700)] 
Prepare for 2.10.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoMerge branch 'tg/add-chmod+x-fix' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:47 +0000 (16:49 -0700)] 
Merge branch 'tg/add-chmod+x-fix' into maint

"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.

* tg/add-chmod+x-fix:
  t3700-add: do not check working tree file mode without POSIXPERM
  t3700-add: create subdirectory gently
  add: modify already added files when --chmod is given
  read-cache: introduce chmod_index_entry
  update-index: add test for chmod flags

7 years agoMerge branch 'et/add-chmod-x' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:46 +0000 (16:49 -0700)] 
Merge branch 'et/add-chmod-x' into maint

"git add --chmod=+x" added recently lacked documentation, which has
been corrected.

* et/add-chmod-x:
  add: document the chmod option

7 years agoMerge branch 'rt/rebase-i-broken-insn-advise' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:46 +0000 (16:49 -0700)] 
Merge branch 'rt/rebase-i-broken-insn-advise' into maint

When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").

* rt/rebase-i-broken-insn-advise:
  rebase -i: improve advice on bad instruction lines

7 years agoMerge branch 'ls/travis-homebrew-path-fix' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:45 +0000 (16:49 -0700)] 
Merge branch 'ls/travis-homebrew-path-fix' into maint

The procedure to build Git on Mac OS X for Travis CI hardcoded the
internal directory structure we assumed HomeBrew uses, which was a
no-no.  The procedure has been updated to ask HomeBrew things we
need to know to fix this.

* ls/travis-homebrew-path-fix:
  travis-ci: ask homebrew for its path instead of hardcoding it

7 years agoMerge branch 'js/regexec-buf' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:44 +0000 (16:49 -0700)] 
Merge branch 'js/regexec-buf' into maint

Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region.  This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.

* js/regexec-buf:
  regex: use regexec_buf()
  regex: add regexec_buf() that can work on a non NUL-terminated string
  regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails

7 years agoMerge branch 'nd/checkout-disambiguation' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:43 +0000 (16:49 -0700)] 
Merge branch 'nd/checkout-disambiguation' into maint

"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.

* nd/checkout-disambiguation:
  checkout: fix ambiguity check in subdir
  checkout.txt: document a common case that ignores ambiguation rules
  checkout: add some spaces between code and comment

7 years agoMerge branch 'ep/doc-check-ref-format-example' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:43 +0000 (16:49 -0700)] 
Merge branch 'ep/doc-check-ref-format-example' into maint

A shell script example in check-ref-format documentation has been
fixed.

* ep/doc-check-ref-format-example:
  git-check-ref-format.txt: fixup documentation

7 years agoMerge branch 'mm/config-color-ui-default-to-auto' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:42 +0000 (16:49 -0700)] 
Merge branch 'mm/config-color-ui-default-to-auto' into maint

Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke.  This has been
corrected.

* mm/config-color-ui-default-to-auto:
  Documentation/config: default for color.* is color.ui

7 years agoMerge branch 'jk/reduce-gc-aggressive-depth' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:42 +0000 (16:49 -0700)] 
Merge branch 'jk/reduce-gc-aggressive-depth' into maint

"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance.  The limit has been reduced to
50.

* jk/reduce-gc-aggressive-depth:
  gc: default aggressive depth to 50

7 years agoMerge branch 'jk/rebase-i-drop-ident-check' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:41 +0000 (16:49 -0700)] 
Merge branch 'jk/rebase-i-drop-ident-check' into maint

Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice.  As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.

* jk/rebase-i-drop-ident-check:
  rebase-interactive: drop early check for valid ident

7 years agoMerge branch 'jt/format-patch-base-info-above-sig' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:40 +0000 (16:49 -0700)] 
Merge branch 'jt/format-patch-base-info-above-sig' into maint

"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient.  The base information
has been moved above the signature line.

* jt/format-patch-base-info-above-sig:
  format-patch: show base info before email signature

7 years agoMerge branch 'ks/perf-build-with-autoconf' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:40 +0000 (16:49 -0700)] 
Merge branch 'ks/perf-build-with-autoconf' into maint

Performance tests done via "t/perf" did not use the same set of
build configuration if the user relied on autoconf generated
configuration.

* ks/perf-build-with-autoconf:
  t/perf/run: copy config.mak.autogen & friends to build area

7 years agoMerge branch 'rs/xdiff-merge-overlapping-hunks-for-W-context' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:39 +0000 (16:49 -0700)] 
Merge branch 'rs/xdiff-merge-overlapping-hunks-for-W-context' into maint

"git diff -W" output needs to extend the context backward to
include the header line of the current function and also forward to
include the body of the entire current function up to the header
line of the next one.  This process may have to merge to adjacent
hunks, but the code forgot to do so in some cases.

* rs/xdiff-merge-overlapping-hunks-for-W-context:
  xdiff: fix merging of hunks with -W context and -u context

7 years agoMerge branch 'ew/http-do-not-forget-to-call-curl-multi-remove-handle' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:39 +0000 (16:49 -0700)] 
Merge branch 'ew/http-do-not-forget-to-call-curl-multi-remove-handle' into maint

The http transport (with curl-multi option, which is the default
these days) failed to remove curl-easy handle from a curlm session,
which led to unnecessary API failures.

* ew/http-do-not-forget-to-call-curl-multi-remove-handle:
  http: always remove curl easy from curlm session on release
  http: consolidate #ifdefs for curl_multi_remove_handle
  http: warn on curl_multi_add_handle failures

7 years agoMerge branch 'jk/patch-ids-no-merges' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:38 +0000 (16:49 -0700)] 
Merge branch 'jk/patch-ids-no-merges' into maint

"git log --cherry-pick" used to include merge commits as candidates
to be matched up with other commits, resulting a lot of wasted time.
The patch-id generation logic has been updated to ignore merges to
avoid the wastage.

* jk/patch-ids-no-merges:
  patch-ids: refuse to compute patch-id for merge commit
  patch-ids: turn off rename detection

7 years agoMerge branch 'js/git-gui-commit-gpgsign' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:38 +0000 (16:49 -0700)] 
Merge branch 'js/git-gui-commit-gpgsign' into maint

"git commit-tree" stopped reading commit.gpgsign configuration
variable that was meant for Porcelain "git commit" in Git 2.9; we
forgot to update "git gui" to look at the configuration to match
this change.

* js/git-gui-commit-gpgsign:
  git-gui: respect commit.gpgsign again

7 years agoMerge branch 'jk/fix-remote-curl-url-wo-proto' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:38 +0000 (16:49 -0700)] 
Merge branch 'jk/fix-remote-curl-url-wo-proto' into maint

"git fetch http::/site/path" did not die correctly and segfaulted
instead.

* jk/fix-remote-curl-url-wo-proto:
  remote-curl: handle URLs without protocol

7 years agoMerge branch 'sy/git-gui-i18n-ja' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:37 +0000 (16:49 -0700)] 
Merge branch 'sy/git-gui-i18n-ja' into maint

Update Japanese translation for "git-gui".

* sy/git-gui-i18n-ja:
  git-gui: update Japanese information
  git-gui: update Japanese translation
  git-gui: add Japanese language code
  git-gui: apply po template to Japanese translation
  git-gui: consistently use the same word for "blame" in Japanese
  git-gui: consistently use the same word for "remote" in Japanese

7 years agoMerge branch 'mr/vcs-svn-printf-ulong' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:37 +0000 (16:49 -0700)] 
Merge branch 'mr/vcs-svn-printf-ulong' into maint

Code cleanup.

* mr/vcs-svn-printf-ulong:
  vcs-svn/fast_export: fix timestamp fmt specifiers

7 years agoMerge branch 'rs/unpack-trees-reduce-file-scope-global' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:36 +0000 (16:49 -0700)] 
Merge branch 'rs/unpack-trees-reduce-file-scope-global' into maint

Code cleanup.

* rs/unpack-trees-reduce-file-scope-global:
  unpack-trees: pass checkout state explicitly to check_updates()

7 years agoMerge branch 'rs/strbuf-remove-fix' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:35 +0000 (16:49 -0700)] 
Merge branch 'rs/strbuf-remove-fix' into maint

Code cleanup.

* rs/strbuf-remove-fix:
  strbuf: use valid pointer in strbuf_remove()

7 years agoMerge branch 'rs/checkout-some-states-are-const' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:35 +0000 (16:49 -0700)] 
Merge branch 'rs/checkout-some-states-are-const' into maint

Code cleanup.

* rs/checkout-some-states-are-const:
  checkout: constify parameters of checkout_stage() and checkout_merged()

7 years agoMerge branch 'bw/pathspec-remove-unused-extern-decl' into maint
Junio C Hamano [Thu, 29 Sep 2016 23:49:34 +0000 (16:49 -0700)] 
Merge branch 'bw/pathspec-remove-unused-extern-decl' into maint

Code cleanup.

* bw/pathspec-remove-unused-extern-decl:
  pathspec: remove unnecessary function prototypes

7 years agograph: fix extra spaces in graph_padding_line
Jeff King [Thu, 29 Sep 2016 08:37:51 +0000 (04:37 -0400)] 
graph: fix extra spaces in graph_padding_line

The graph_padding_line() function outputs a series of "|"
columns, and then pads with spaces to graph->width by
calling graph_pad_horizontally(). However, we tell the
latter that we wrote graph->num_columns characters, which is
not true; we also needed spaces between the columns. Let's
keep a count of how many characters we've written, which is
what all the other callers of graph_pad_horizontally() do.

Without this, any output that is written at the end of a
padding line will be bumped out by at least an extra
graph->num_columns spaces. Presumably nobody ever noticed
the bug because there's no code path that actually writes to
the end of a padding line.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoblame: use DEFAULT_ABBREV macro
Junio C Hamano [Wed, 28 Sep 2016 21:56:00 +0000 (14:56 -0700)] 
blame: use DEFAULT_ABBREV macro

This does not make any practical difference in today's code, but
everybody else accesses the default abbreviation length via the
DEFAULT_ABBREV macro.  Make sure this oddball codepath does not
stray from the convention.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agomailinfo: unescape quoted-pair in header fields
Kevin Daudt [Wed, 28 Sep 2016 19:52:32 +0000 (21:52 +0200)] 
mailinfo: unescape quoted-pair in header fields

rfc2822 has provisions for quoted strings in structured header fields,
but also allows for escaping these with so-called quoted-pairs.

The only thing git currently does is removing exterior quotes, but
quotes within are left alone.

Remove exterior quotes and remove escape characters so that they don't
show up in the author field.

Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agot5100-mailinfo: replace common path prefix with variable
Kevin Daudt [Wed, 28 Sep 2016 19:52:31 +0000 (21:52 +0200)] 
t5100-mailinfo: replace common path prefix with variable

Many tests need to store data in a file, and repeat the same pattern to
refer to that path:

    "$TEST_DIRECTORY"/t5100/

Create a variable that contains this path, and use that instead.

While we're making this change, make sure the quotes are not just around
the variable, but around the entire string to not give the impression
we want shell splitting to affect the other variables.

Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agorev-list-options: clarify the usage of --reverse
Pranit Bauva [Tue, 27 Sep 2016 20:44:09 +0000 (20:44 +0000)] 
rev-list-options: clarify the usage of --reverse

Users often wonder if the oldest or the newest n commits are shown
by `log -n --reverse`.  Clarify that --reverse kicks in only after
deciding which commits are to be shown to unconfuse them.

Reported-by: Ruediger Meier <sweet_f_a@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoworktree: honor configuration variables
Junio C Hamano [Tue, 27 Sep 2016 06:49:39 +0000 (23:49 -0700)] 
worktree: honor configuration variables

The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config().  The output from "worktree list" ignores the abbrev
setting for this reason.

Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoadd David Turner's Two Sigma address
David Turner [Tue, 27 Sep 2016 00:11:33 +0000 (20:11 -0400)] 
add David Turner's Two Sigma address

Signed-off-by: David Turner <novalis@novalis.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agounpack_sha1_header(): detect malformed object header
Junio C Hamano [Mon, 26 Sep 2016 04:29:04 +0000 (21:29 -0700)] 
unpack_sha1_header(): detect malformed object header

When opening a loose object file, we often do this sequence:

 - prepare a short buffer for the object header (on stack)

 - call unpack_sha1_header() and have early part of the object data
   inflated, enough to fill the buffer

 - parse that data in the short buffer, assuming that the first part
   of the object is <typename> SP <length> NUL

Because the parsing function parse_sha1_header_extended() is not
given the number of bytes inflated into the header buffer, it you
craft a file whose early part inflates a garbage sequence without SP
or NUL, and replace a loose object with it, it will end up reading
past the end of the inflated data.

To correct this, do the following four things:

 - rename unpack_sha1_header() to unpack_sha1_short_header() and
   have unpack_sha1_header_to_strbuf() keep calling that as its
   helper function.  This will detect and report zlib errors, but is
   not aware of the format of a loose object (as before).

 - introduce unpack_sha1_header() that calls the same helper
   function, and when zlib reports it inflated OK into the buffer,
   check if the inflated data has NUL.  This would ensure that
   parsing function will terminate within the buffer that holds the
   inflated header.

 - update unpack_sha1_header_to_strbuf() to check if the resulting
   buffer has NUL for the same effect.

 - update parse_sha1_header_extended() to make sure that its loop to
   find the SP that terminates the <typename> stops at NUL.

Essentially, this makes unpack_*() functions that are asked to
unpack a loose object header to be a bit more strict and detect an
input that cannot possibly be a valid object header, even before the
parsing function kicks in.

Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agostreaming: make sure to notice corrupt object
Junio C Hamano [Mon, 26 Sep 2016 16:23:41 +0000 (09:23 -0700)] 
streaming: make sure to notice corrupt object

The streaming read interface from a loose object called
parse_sha1_header() but discarded its return value, without noticing
a potential error.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoMerge branch 'rs/use-modern-git-merge-syntax' of git-gui into rs/git-gui-use-modern...
Junio C Hamano [Mon, 26 Sep 2016 14:16:29 +0000 (07:16 -0700)] 
Merge branch 'rs/use-modern-git-merge-syntax' of git-gui into rs/git-gui-use-modern-git-merge-syntax

* 'rs/use-modern-git-merge-syntax' of git-gui:
  git-gui: stop using deprecated merge syntax

7 years agogit-gui: stop using deprecated merge syntax
René Scharfe [Sat, 24 Sep 2016 11:30:22 +0000 (13:30 +0200)] 
git-gui: stop using deprecated merge syntax

Starting with v2.5.0 git merge can handle FETCH_HEAD internally and
warns when it's called like 'git merge <message> HEAD <commit>' because
that syntax is deprecated.  Use this feature in git-gui and get rid of
that warning.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agouse COPY_ARRAY
René Scharfe [Sun, 25 Sep 2016 07:24:03 +0000 (09:24 +0200)] 
use COPY_ARRAY

Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base.  The result
is
 shorter and safer code.  For now only consider calls where source and
destination have the same type, or in other words: easy cases.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoadd COPY_ARRAY
René Scharfe [Sun, 25 Sep 2016 07:15:42 +0000 (09:15 +0200)] 
add COPY_ARRAY

Add COPY_ARRAY, a safe and convenient helper for copying arrays,
complementing ALLOC_ARRAY and REALLOC_ARRAY.  Users just specify source,
destination and the number of elements; the size of an element is
inferred automatically.

It checks if the multiplication of size and element count overflows.
The inferred size is passed first to st_mult, which allows the division
there to be done at compilation time.

As a basic type safety check it makes sure the sizes of source and
destination elements are the same.  That's evaluated at compilation time
as well.

COPY_ARRAY is safe to use with NULL as source pointer iff 0 elements are
to be copied.  That convention is used in some cases for initializing
arrays.  Raw memcpy(3) does not support it -- compilers are allowed to
assume that only valid pointers are passed to it and can optimize away
NULL checks after such a call.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoident: handle NULL ai_canonname
Jeff King [Fri, 23 Sep 2016 04:37:53 +0000 (00:37 -0400)] 
ident: handle NULL ai_canonname

We call getaddrinfo() to try to convert a short hostname
into a fully-qualified one (to use it as an email domain).
If there isn't a canonical name, getaddrinfo() will
generally return either a NULL addrinfo list, or one in
which ai->ai_canonname is a copy of the original name.

However, if the result of gethostname() looks like an IP
address, then getaddrinfo() behaves differently on some
systems. On OS X, it will return a "struct addrinfo" with a
NULL ai_canonname, and we segfault feeding it to strchr().

This is hard to test reliably because it involves not only a
system where we we have to fallback to gethostname() to come
up with an ident, but also where the hostname is a number
with no dots. But I was able to replicate the bug by faking
a hostname, like:

    diff --git a/ident.c b/ident.c
    index e20a772..b790d28 100644
    --- a/ident.c
    +++ b/ident.c
    @@ -128,6 +128,7 @@ static void add_domainname(struct strbuf *out, int *is_bogus)
                     *is_bogus = 1;
                     return;
             }
    +        xsnprintf(buf, sizeof(buf), "1");
             if (strchr(buf, '.'))
                     strbuf_addstr(out, buf);
             else if (canonical_name(buf, out) < 0) {

and running "git var GIT_AUTHOR_IDENT" on an OS X system.

Before this patch it segfaults, and after we correctly
complain of the bogus "user@1.(none)" address (though this
bogus address would be suitable for non-object uses like
writing reflogs).

Reported-by: Jonas Thiel <jonas.lierschied@gmx.de>
Diagnosed-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agodocs/cvs-migration: mention cvsimport caveats
Jeff King [Thu, 22 Sep 2016 07:26:28 +0000 (03:26 -0400)] 
docs/cvs-migration: mention cvsimport caveats

Back when this guide was written, cvsimport was the only
game in town. These days it is probably not the best option.
Rather than go into details, let's point people to the note
at the top of cvsimport which gives other options.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agodocs/cvs-migration: update link to cvsps homepage
Jeff King [Thu, 22 Sep 2016 07:26:07 +0000 (03:26 -0400)] 
docs/cvs-migration: update link to cvsps homepage

The old page gives a 404 now. Searching for "cvsps" via
Google returns a GitHub project page as the top hit.

Reported-by: Dan Pritts
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agodocs/cvsimport: prefer cvs-fast-export to parsecvs
Jeff King [Thu, 22 Sep 2016 07:25:28 +0000 (03:25 -0400)] 
docs/cvsimport: prefer cvs-fast-export to parsecvs

parsecvs maintenance was taken over by ESR, and the name
changed to cvs-fast-export as it learned to support that
output format. Let's point to cvs-fast-export, as it should
have additional bug-fixes and be more convenient to use.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoverify_packfile: check pack validity before accessing data
Jeff King [Thu, 22 Sep 2016 03:49:05 +0000 (23:49 -0400)] 
verify_packfile: check pack validity before accessing data

The verify_packfile() does not explicitly open the packfile;
instead, it starts with a sha1 checksum over the whole pack,
and relies on use_pack() to open the packfile as a side
effect.

If the pack cannot be opened for whatever reason (either
because its header information is corrupted, or perhaps
because a simultaneous repack deleted it), then use_pack()
will die(), as it has no way to return an error. This is not
ideal, as verify_packfile() otherwise tries to gently return
an error (this lets programs like git-fsck go on to check
other packs).

Instead, let's check is_pack_valid() up front, and return an
error if it fails. This will open the pack as a side effect,
and then use_pack() will later rely on our cached
descriptor, and avoid calling die().

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agotravis-ci: ask homebrew for its path instead of hardcoding it
Lars Schneider [Wed, 21 Sep 2016 08:45:18 +0000 (10:45 +0200)] 
travis-ci: ask homebrew for its path instead of hardcoding it

The TravisCI macOS build is broken because homebrew (a macOS dependency
manager) changed its internal directory structure [1]. This is a problem
because we modify the Perforce dependencies in the homebrew repository
before installing them.

Fix it by asking homebrew for its path instead of hardcoding it.

[1] https://github.com/Homebrew/brew/commit/0a09ae30f8b6117ad699b4a0439010738989c547

Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agot3700-add: do not check working tree file mode without POSIXPERM
Johannes Sixt [Tue, 20 Sep 2016 06:18:25 +0000 (08:18 +0200)] 
t3700-add: do not check working tree file mode without POSIXPERM

A recently introduced test checks the result of 'git status' after
setting the executable bit on a file. This check does not yield the
expected result when the filesystem does not support the executable
bit.

What we care about is that a file added with "--chmod=+x" has
executable bit in the index and that "--chmod=+x" (or any other
options for that matter) does not muck with working tree files.
The former is tested by other existing tests, so let's check the
latter more explicitly and only under POSIXPERM prerequisite.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoregex: use regexec_buf()
Johannes Schindelin [Wed, 21 Sep 2016 18:24:14 +0000 (20:24 +0200)] 
regex: use regexec_buf()

The new regexec_buf() function operates on buffers with an explicitly
specified length, rather than NUL-terminated strings.

We need to use this function whenever the buffer we want to pass to
regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated).

Note: the original motivation for this patch was to fix a bug where
`git diff -G <regex>` would crash. This patch converts more callers,
though, some of which allocated to construct NUL-terminated strings,
or worse, modified buffers to temporarily insert NULs while calling
regexec(3).  By converting them to use regexec_buf(), the code has
become much cleaner.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoregex: add regexec_buf() that can work on a non NUL-terminated string
Johannes Schindelin [Wed, 21 Sep 2016 18:24:04 +0000 (20:24 +0200)] 
regex: add regexec_buf() that can work on a non NUL-terminated string

We just introduced a test that demonstrates that our sloppy use of
regexec() on a mmap()ed area can result in incorrect results or even
hard crashes.

So what we need to fix this is a function that calls regexec() on a
length-delimited, rather than a NUL-terminated, string.

Happily, there is an extension to regexec() introduced by the NetBSD
project and present in all major regex implementation including
Linux', MacOSX' and the one Git includes in compat/regex/: by using
the (non-POSIX) REG_STARTEND flag, it is possible to tell the
regexec() function that it should only look at the offsets between
pmatch[0].rm_so and pmatch[0].rm_eo.

That is exactly what we need.

Since support for REG_STARTEND is so widespread by now, let's just
introduce a helper function that always uses it, and tell people
on a platform whose regex library does not support it to use the
one from our compat/regex/ directory.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoregex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
Johannes Schindelin [Wed, 21 Sep 2016 18:23:22 +0000 (20:23 +0200)] 
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails

When our pickaxe code feeds file contents to regexec(), it implicitly
assumes that the file contents are read into implicitly NUL-terminated
buffers (i.e. that we overallocate by 1, appending a single '\0').

This is not so.

In particular when the file contents are simply mmap()ed, we can be
virtually certain that the buffer is preceding uninitialized bytes, or
invalid pages.

Note that the test we add here is known to be flakey: we simply cannot
know whether the byte following the mmap()ed ones is a NUL or not.

Typically, on Linux the test passes. On Windows, it fails virtually
every time due to an access violation (that's a segmentation fault for
you Unix-y people out there). And Windows would be correct: the
regexec() call wants to operate on a regular, NUL-terminated string,
there is no NUL in the mmap()ed memory range, and it is undefined
whether the next byte is even legal to access.

When run with --valgrind it demonstrates quite clearly the breakage, of
course.

Being marked with `test_expect_failure`, this test will sometimes be
declare "TODO fixed", even if it only passes by mistake.

This test case represents a Minimal, Complete and Verifiable Example of
a breakage reported by Chris Sidi.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agogit-check-ref-format.txt: fixup documentation
Elia Pinto [Tue, 20 Sep 2016 07:33:14 +0000 (07:33 +0000)] 
git-check-ref-format.txt: fixup documentation

die is not a standard shell function. Use
a different shell code for the example.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agot3700-add: create subdirectory gently
Johannes Sixt [Tue, 20 Sep 2016 06:16:11 +0000 (08:16 +0200)] 
t3700-add: create subdirectory gently

The subdirectory 'sub' is created early in the test file. Later, a test
case removes it during its clean-up actions. However, this test case is
protected by POSIXPERM. Consequently, 'sub' remains when the POSIXPERM
prerequisite is not satisfied. Later, a recently introduced test case
creates 'sub' again. Use -p with mkdir so that it does not fail if 'sub'
already exists.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agocheckout: fix ambiguity check in subdir
Nguyễn Thái Ngọc Duy [Wed, 7 Sep 2016 11:19:41 +0000 (18:19 +0700)] 
checkout: fix ambiguity check in subdir

The two functions in parse_branchname_arg(), verify_non_filename and
check_filename, need correct prefix in order to reconstruct the paths
and check for their existence. With NULL prefix, they just check paths
at top dir instead.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agocheckout.txt: document a common case that ignores ambiguation rules
Nguyễn Thái Ngọc Duy [Wed, 7 Sep 2016 11:19:40 +0000 (18:19 +0700)] 
checkout.txt: document a common case that ignores ambiguation rules

Normally we err on the safe side: if something can be seen as both an
SHA1 and a pathspec, we stop and scream. In checkout, there is one
exception added in 859fdab (git-checkout: improve error messages, detect
ambiguities. - 2008-07-23), to allow the common case "git checkout
branch". Let's document this exception.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoStart preparing for 2.10.1
Junio C Hamano [Mon, 19 Sep 2016 20:54:50 +0000 (13:54 -0700)] 
Start preparing for 2.10.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoMerge branch 'sb/diff-cleanup' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:45 +0000 (13:51 -0700)] 
Merge branch 'sb/diff-cleanup' into maint

Code cleanup.

* sb/diff-cleanup:
  diff: remove dead code
  diff: omit found pointer from emit_callback
  diff.c: use diff_options directly

7 years agoMerge branch 'ah/misc-message-fixes' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:45 +0000 (13:51 -0700)] 
Merge branch 'ah/misc-message-fixes' into maint

Message cleanup.

* ah/misc-message-fixes:
  unpack-trees: do not capitalize "working"
  git-merge-octopus: do not capitalize "octopus"
  git-rebase--interactive: fix English grammar
  cat-file: put spaces around pipes in usage string
  am: put spaces around pipe in usage string

7 years agoMerge branch 'sb/transport-report-missing-submodule-on-stderr' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:45 +0000 (13:51 -0700)] 
Merge branch 'sb/transport-report-missing-submodule-on-stderr' into maint

Message cleanup.

* sb/transport-report-missing-submodule-on-stderr:
  transport: report missing submodule pushes consistently on stderr

7 years agoMerge branch 'sb/xdiff-remove-unused-static-decl' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:44 +0000 (13:51 -0700)] 
Merge branch 'sb/xdiff-remove-unused-static-decl' into maint

Code cleanup.

* sb/xdiff-remove-unused-static-decl:
  xdiff: remove unneeded declarations

7 years agoMerge branch 'js/t9903-chaining' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:44 +0000 (13:51 -0700)] 
Merge branch 'js/t9903-chaining' into maint

Test fix.

* js/t9903-chaining:
  t9903: fix broken && chain

7 years agoMerge branch 'rs/hex2chr' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:43 +0000 (13:51 -0700)] 
Merge branch 'rs/hex2chr' into maint

Code cleanup.

* rs/hex2chr:
  introduce hex2chr() for converting two hexadecimal digits to a character

7 years agoMerge branch 'rs/compat-strdup' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:42 +0000 (13:51 -0700)] 
Merge branch 'rs/compat-strdup' into maint

Code cleanup.

* rs/compat-strdup:
  compat: move strdup(3) replacement to its own file

7 years agoMerge branch 'jk/squelch-false-warning-from-gcc-o3' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:41 +0000 (13:51 -0700)] 
Merge branch 'jk/squelch-false-warning-from-gcc-o3' into maint

Compilation fix.

* jk/squelch-false-warning-from-gcc-o3:
  color_parse_mem: initialize "struct color" temporary
  error_errno: use constant return similar to error()

7 years agoMerge branch 'ep/use-git-trace-curl-in-tests' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:41 +0000 (13:51 -0700)] 
Merge branch 'ep/use-git-trace-curl-in-tests' into maint

Update a few tests that used to use GIT_CURL_VERBOSE to use the
newer GIT_TRACE_CURL.

* ep/use-git-trace-curl-in-tests:
  t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var
  t5550-http-fetch-dumb.sh: use the GIT_TRACE_CURL environment var
  test-lib.sh: preserve GIT_TRACE_CURL from the environment
  t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var

7 years agoMerge branch 'js/t6026-clean-up' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:41 +0000 (13:51 -0700)] 
Merge branch 'js/t6026-clean-up' into maint

A test spawned a short-lived background process, which sometimes
prevented the test directory from getting removed at the end of the
script on some platforms.

* js/t6026-clean-up:
  t6026-merge-attr: clean up background process at end of test case

7 years agoMerge branch 'jc/forbid-symbolic-ref-d-HEAD' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:40 +0000 (13:51 -0700)] 
Merge branch 'jc/forbid-symbolic-ref-d-HEAD' into maint

"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one.  Teach the command
to forbid removal of HEAD.

* jc/forbid-symbolic-ref-d-HEAD:
  symbolic-ref -d: do not allow removal of HEAD

7 years agoMerge branch 'jc/submodule-anchor-git-dir' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:40 +0000 (13:51 -0700)] 
Merge branch 'jc/submodule-anchor-git-dir' into maint

Having a submodule whose ".git" repository is somehow corrupt
caused a few commands that recurse into submodules loop forever.

* jc/submodule-anchor-git-dir:
  submodule: avoid auto-discovery in prepare_submodule_repo_env()

7 years agoMerge branch 'jk/test-lib-drop-pid-from-results' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:39 +0000 (13:51 -0700)] 
Merge branch 'jk/test-lib-drop-pid-from-results' into maint

The test framework left the number of tests and success/failure
count in the t/test-results directory, keyed by the name of the
test script plus the process ID.  The latter however turned out not
to serve any useful purpose.  The process ID part of the filename
has been removed.

* jk/test-lib-drop-pid-from-results:
  test-lib: drop PID from test-results/*.count

7 years agoMerge branch 'bh/diff-highlight-graph' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:38 +0000 (13:51 -0700)] 
Merge branch 'bh/diff-highlight-graph' into maint

"diff-highlight" script (in contrib/) learned to work better with
"git log -p --graph" output.

* bh/diff-highlight-graph:
  diff-highlight: avoid highlighting combined diffs
  diff-highlight: add multi-byte tests
  diff-highlight: ignore test cruft
  diff-highlight: add support for --graph output
  diff-highlight: add failing test for handling --graph output
  diff-highlight: add some tests

7 years agoMerge branch 'po/range-doc' into maint
Junio C Hamano [Mon, 19 Sep 2016 20:51:37 +0000 (13:51 -0700)] 
Merge branch 'po/range-doc' into maint

Clarify various ways to specify the "revision ranges" in the
documentation.

* po/range-doc:
  doc: revisions: sort examples and fix alignment of the unchanged
  doc: revisions: show revision expansion in examples
  doc: revisions - clarify reachability examples
  doc: revisions - define `reachable`
  doc: gitrevisions - clarify 'latter case' is revision walk
  doc: gitrevisions - use 'reachable' in page description
  doc: revisions: single vs multi-parent notation comparison
  doc: revisions: extra clarification of <rev>^! notation effects
  doc: revisions: give headings for the two and three dot notations
  doc: show the actual left, right, and boundary marks
  doc: revisions - name the left and right sides
  doc: use 'symmetric difference' consistently

7 years agopretty: let %C(auto) reset all attributes
René Scharfe [Sat, 17 Sep 2016 18:25:24 +0000 (20:25 +0200)] 
pretty: let %C(auto) reset all attributes

Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoDocumentation/config: default for color.* is color.ui
Matthieu Moy [Fri, 16 Sep 2016 07:32:48 +0000 (09:32 +0200)] 
Documentation/config: default for color.* is color.ui

Since 4c7f181 (make color.ui default to 'auto', 2013-06-10), the
default for color.* when nothing is set is 'auto' and we still claimed
that the default was 'false'. Be more precise by saying explicitly
that the default is to follow color.ui, and recall that the default is
'auto' to avoid one indirection for the reader.

Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agot/perf/run: copy config.mak.autogen & friends to build area
Kirill Smelkov [Tue, 13 Sep 2016 06:58:00 +0000 (09:58 +0300)] 
t/perf/run: copy config.mak.autogen & friends to build area

Otherwise for people who use autotools-based configure in main worktree,
the performance testing results will be inconsistent as work and build
trees could be using e.g. different optimization levels.

See e.g.

http://public-inbox.org/git/20160818175222.bmm3ivjheokf2qzl@sigill.intra.peff.net/

for example.

NOTE config.status has to be copied because otherwise without it the build
would want to run reconfigure this way loosing just copied config.mak.autogen.

Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoadd: modify already added files when --chmod is given
Thomas Gummerer [Wed, 14 Sep 2016 21:07:47 +0000 (22:07 +0100)] 
add: modify already added files when --chmod is given

When the chmod option was added to git add, it was hooked up to the diff
machinery, meaning that it only works when the version in the index
differs from the version on disk.

As the option was supposed to mirror the chmod option in update-index,
which always changes the mode in the index, regardless of the status of
the file, make sure the option behaves the same way in git add.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoread-cache: introduce chmod_index_entry
Thomas Gummerer [Wed, 14 Sep 2016 21:07:46 +0000 (22:07 +0100)] 
read-cache: introduce chmod_index_entry

As there are chmod options for both add and update-index, introduce a
new chmod_index_entry function to do the work.  Use it in update-index,
while it will be used in add in the next patch.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoformat-patch: show base info before email signature
Josh Triplett [Thu, 8 Sep 2016 01:12:01 +0000 (18:12 -0700)] 
format-patch: show base info before email signature

Any text below the "-- " for the email signature gets treated as part of
the signature, and many mail clients will trim it from the quoted text
for a reply.  Move it above the signature, so people can reply to it
more easily.

Similarly, when producing the patch as a MIME attachment, the
original code placed the base info after the attached part, which
would be discarded.  Move the base info to the end of the part,
still inside the part boundary.

Add tests for the exact format of the email signature, and add tests
to ensure that the base info appears before the email signature when
producing a plain-text output, and that it appears before the part
boundary when producing a MIME attachment.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7 years agoxdiff: fix merging of hunks with -W context and -u context
René Scharfe [Wed, 14 Sep 2016 16:05:27 +0000 (18:05 +0200)] 
xdiff: fix merging of hunks with -W context and -u context

If the function context for a hunk (with -W) reaches the beginning of
the next hunk then we need to merge these two -- otherwise we'd show
some lines twice, which looks strange and even confuses git apply.  We
already do this checking and merging in xdl_emit_diff(), but forget to
consider regular context (with -u or -U).

Fix that by merging hunks already if function context of the first one
touches or overlaps regular context of the second one.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>