Merge branch 'master' into dependency-types
[ikiwiki] / doc / todo / dependency_types.mdwn
1 Ikiwiki currently only has one type of dependency between pages
2 (plus wikilinks special cased in on the side). This has resulted in various
3 problems, and it's seemed for a long time to me that ikiwiki needs to get
4 smarter about what types of dependencies are supported.
5
6 ### unnecessary work
7
8 The current single dependency type causes the depending page to be rebuilt
9 whenever a matching dependency is added, removed, or *modified*. But a
10 great many things don't care about the modification case, and often cause
11 unnecessary page rebuilds:
12
13 * map only cares if the pages are added or removed. Content change does
14   not matter (unless show=title is used).
15 * brokenlinks, orphans, pagecount, ditto (generally)
16 * inline in archive mode cares about page title, author changing, but
17   not content. (Ditto for meta with show=title.)
18 * Causes extra work when solving the [[bugs/transitive_dependencies]]
19   problem.
20
21 ### two types of dependencies needed for [[tracking_bugs_with_dependencies]]
22
23 >>  it seems that there are two types of dependency, and ikiwiki
24 >>  currently only handles one of them.  The first type is "Rebuild this
25 >>  page when any of these other pages changes" - ikiwiki handles this.
26 >>  The second type is "rebuild this page when set of pages referred to by
27 >>  this pagespec changes" - ikiwiki doesn't seem to handle this.  I
28 >>  suspect that named pagespecs would make that second type of dependency
29 >>  more important.  I'll try to come up with a good example. -- [[Will]]
30
31 >>> Hrm, I was going to build an example of this with backlinks, but it
32 >>> looks like that is handled as a special case at the moment (line 458 of
33 >>> render.pm).  I'll see if I can breapk
34 >>> things another way.  Fixing this properly would allow removal of that special case. -- [[Will]]
35
36 >>>> I can't quite understand the distinction you're trying to draw
37 >>>> between the two types of dependencies. Backlinks are a very special
38 >>>> case though and I'll be suprised if they fit well into pagespecs.
39 >>>> --[[Joey]] 
40
41 >>>>> The issue is that the existential pagespec matching allows you to build things that have similar
42 >>>>> problems to backlinks.
43 >>>>> e.g. the following inline:
44
45     \[[!inline pages="define(~done, link(done)) and link(~done)" archive=yes]]
46
47 >>>>> includes any page that links to a page that links to done.  Now imagine I add a new link to 'done' on
48 >>>>> some random page somewhere - a page which some other page links to which didn't previously get included - the set of pages accepted by the pagespec, and hence the set of
49 >>>>> pages inlined, will change.  But, there is no dependency anywhere on the page that I altered, so
50 >>>>> ikiwiki will not rebuild the page with the inline in it.  What is happening is that the page that I altered affects
51 >>>>> the set of pages matched by the pagespec without itself being matched by the pagespec, and hence included in the dependency list.
52
53 >>>>> To make this work well, I think you need to recognise two types of dependencies for each page (and no
54 >>>>> special cases for particular types of links, eg backlinks).  The first type of dependency says, "The content of
55 >>>>> this page depends upon the content of these other pages".  The `add_depends()` in the shortcuts
56 >>>>> plugin is of this form: any time the shortcuts page is edited, any page with a shortcut on it
57 >>>>> is rebuilt.  The inline plugin also needs to add dependencies of this form to detect when the inlined
58 >>>>> content changes.  By contrast, the map plugin does not need a dependency of this form, because it
59 >>>>> doesn't actually care about the content of any pages, just which pages it needs to include (which we'll handle next).
60
61 >>>>> The second type of dependency says, "The content of this page depends upon the exact set of pages matched
62 >>>>> by this pagespec".  The first type of dependency was about the content of some pages, the second type is about
63 >>>>> which pages get matched by a pagespec.  This is the type of dependency tracking that the map plugin needs.
64 >>>>> If the set of pages matched by map pagespec changes, then the page with the map on it needs to be rebuilt to show a different list of pages.
65 >>>>> Inline needs this type of dependency as well as the previous type - This type handles a change in which pages
66 >>>>> are inlined, the previous type handles a change in the content of any of those pages.  Shortcut does not need this type of
67 >>>>> dependency.  Most of the places that use `add_depends()` seem to need this type of dependency rather than the first type.
68
69 >>>>>> Note that inline and map currently achieve the second type of dependency by
70 >>>>>> explicitly calling `add_depends` for each page the displayed.
71 >>>>>> If any of those pages are removed, the regular pagespec would not
72 >>>>>> match them -- since they're gone. However, the explicit dependency
73 >>>>>> on them does cause them to match. It's an ugly corner I'd like to
74 >>>>>> get rid of. --[[Joey]]
75
76 >>>>> Implementation Details:  The first type of dependency can be handled very similarly to the current
77 >>>>> dependency system.  You just need to keep a list of pages that the content depends upon.  You could
78 >>>>> keep that list as a pagespec, but if you do this you might want to check that the pagespec doesn't change,
79 >>>>> possibly by adding a dependency of the second type along with the dependency of the first type.
80
81 >>>>>> An example of the current system not tracking enough data is 
82 >>>>>> described in [[bugs/transitive_dependencies]].
83 >>>>>> --[[Joey]] 
84
85 >>>>> The second type of dependency is a little more tricky.  For each page, we'd need a list of pagespecs that
86 >>>>> the page depended on, and for each pagespec you'd want to store the list of pages that currently match it.
87 >>>>> On refresh, you'd need to check each pagespec to see if the set of pages that match it has changed, and if
88 >>>>> that set has changed, then rebuild the dependent page(s).  Oh, and for this second type of dependency, I
89 >>>>> don't think you can merge pagespecs.  If I wanted to know if either "\*" or "link(done)" changes, then just checking
90 >>>>> to see if the set of pages matched by "\* or link(done)" changes doesn't work.
91
92 >>>>> The current system works because even though you usually want dependencies of the second type, the set of pages
93 >>>>> referred to by a pagespec can only change if one of those pages itself changes.  i.e. A dependency check of the
94 >>>>> first type will catch a dependency change of the second type with current pagespecs.
95 >>>>> This doesn't work with backlinks, and it doesn't work with existential matching.  Backlinks are currently special-cased.  I don't know
96 >>>>> how to special-case existential matching - I suspect you're better off just getting the dependency tracking right.
97
98 >>>>> I also tried to come up with other possible solutions: e.g. can we find the dependencies for a pagespec?  That
99 >>>>> would be the set of pages where a change on one of those pages could lead to a change in the set of pages matched by the pagespec.
100 >>>>> For old-style pagespecs without backlinks, the dependency set for a pagespec is the same as the set of pages the pagespec matches.
101 >>>>> Unfortunately, with existential matching, the set of pages that each
102 >>>>> pagespec depends upon can quickly become "*", which is not very useful.  -- [[Will]]
103
104 ### proposal
105
106 I propose the following. --[[Joey]] 
107
108 * Add a second type of dependency, call it an "presence dependency".
109 * `add_depends` defaults to adding a regular ("full") dependency, as
110   before. (So nothing breaks.)
111 * `add_depends($page, $spec, presence => 0)` adds an presence dependency.
112 * `refresh` only looks at added/removed pages when resolving presence
113   dependencies.
114
115 This seems straightforwardly doable. I'd like [[Will]]'s feedback on it, if
116 possible. The type types of dependencies I am proposing are not identical
117 to the two types he talks about above, but I hope are close enough that
118 they can be used.
119
120 This doesn't deal with the stuff that only depend on the metadata of a
121 page, as collected in the scan pass, changing.  But it does leave a window
122 open for adding such a dependency type later.
123
124 ----
125
126 I implemented the above in a branch.
127 [[!template id=gitbranch branch=origin/dependency-types author="[[joey]]"]]
128
129 Then I found some problems:
130
131 * Something simple like pagecount, that seems like it could use a
132   presence dependency, can have a pagespec that uses metadata, like
133   `author()` or `copyright()`.
134 * pagestats, orphans and brokenlinks cannot use presence dependencies
135   because they need to update when links change.
136
137 Now I'm thinking about having a special dependency look at page
138 metadata, and fire if the metadata changes. And it seems links should
139 either be included in that, or there should be a way to make a dependency
140 that fires when a page's links change. (And what about backlinks?)
141
142 It's easy to see when a page's links change, since there is `%oldlinks`.
143 To see when metadata is changed is harder, since it's stored in the
144 pagestate by the meta plugin. Also, there are many different types of
145 metadata, that would need to be matched with the pagespecs somehow.
146
147 Quick alternative: Make add_depends look at the pagespec. Ie, if it
148 is a simple page name, or a glob, we know a presence dependency
149 can be valid. If's more complex, convert the dependency from
150 presence to full.
151
152 There is a lot to dislike about this method. Its parsing of the pagespec,
153 as currently implemented, does not let plugins add new types of pagespecs
154 that only care about presence. Its pagespec parsing is also subject to
155 false negatives (though these should be somewhat rare, and no false
156 positives). Still, it does work, and it makes things like simple maps and
157 pagecounts much more efficient.
158
159 ----
160
161 #### Will's first pass feedback.
162
163 If the API is going to be updated, then it would be good to make it forward compatible.
164 I'd like for the API to be extendible to what is useful for complex pagespecs, even if we
165 that is a little redundant at the moment.
166
167 My attempt to play with this is in my git repo.  [[!template id=gitbranch branch=origin/depends-spec author="[[will]]"]]
168 That branch is a little out of date, but if you just look at the changes in IkiWiki.pm you'll see the concept I was looking at.
169 I added an "add_depends_spec()" function that adds a dependency on the pagespec passed to it.  If the set of matched pages
170 changes, then the dependent page is rebuilt.  At the moment the implementation uses the same hack used by map and inline -
171 just add all the pages that currently exist as traditional content dependencies.
172
173 > As I note below, a problem with this approach is that it has to try
174 > matching the pagespec against every page, redundantly with the work done
175 > by the plugin. (But there are ways to avoid that redundant matching.)
176 > --[[Joey]] 
177
178 Getting back to commenting on your proposal:
179
180 Just talking about the definition of a "presence dependency" for the moment, and ignoring implementation.  Is a
181 "presence dependency" supposed to cause an update when a page disappears?  I assume so.  Is a presence dependency
182 supposed to cause an update when a pages existence hasn't changed, but it no longer matches the pagespec.
183 (e.g. you use `created_before(test_page)` in a pagespec, and there was a page, `new_page`, that was created
184 after `test_page`.  `new_page` will not match the spec.  Now we'll delete and then re-create `test_page`.  Now
185 `new_page` will match the spec, and yet `new_page` itself hasn't changed.  Nor has its 'presence' - it was present
186 before and it is present now.  Should this cause a re-build of any page that has a 'presence' dependency on the spec?
187
188 > Yes, a presence dep will trigger when a page is added, or removed. 
189
190 > Your example is valid.. but it's also not handled right by normal,
191 > (content) dependencies, for the same reasons. Still, I think I've
192 > addressed it with the pagespec influence stuff below. --[[Joey]]
193
194 I think that is another version of the problem you encountered with meta-data.
195
196 In the longer term I was thinking we'd have to introduce a concept of 'internal pagespec dependencies'.  Note that I'm
197 defining 'internal' pagespec dependencies differently to the pagespec dependencies I defined above.  Perhaps an example:
198 If you had a pagespec that was `created_before(test_page)`, then you could list all pages created before `test_page`
199 with a `map` directive.  The map directive would add a pagespec dependency on `created_before(test_page)`.
200 Internally, there would be a second page-spec parsing function that discovers which pages a given pagespec
201 depends on.  As well as the function `match_created_before()`, we'd have to add a new function `depend_created_before()`.
202 This new function would return a list of pages, which when any of them change, the output of `match_created_before()`
203 would change.  In this example, it would just return `test_page`.
204
205 These lists of dependent pages could just be concatenated for every `match_...()` function in a pagespec - you can ignore
206 the boolean formula aspects of the pagespec for this.  If a content dependency were added on these pages, then I think 
207 the correct rebuilds would occur.  
208
209 In all, this is a surprisingly difficult problem to solve perfectly.  Consider the following case:
210
211 PageA.mdwn:
212
213 > [ShavesSelf]
214
215 PageB.mdwn
216
217 > Doesn't shave self.
218
219 ShavedByBob.mdwn:
220
221 > [!include pages="!link(ShavesSelf)"]
222
223 Does ShavedByBob.mdwn include itself?
224
225 (Yeah - in IkiWiki currently links are included by include, but the idea holds.  I had a good example a while back, but I can't think of it right now.)
226
227 sigh.
228
229 -- [[Will]]
230
231 > I have also been thinking about some sort of analysis pass over pagespecs
232 > to determine what metadata, pages, etc they depend on. It is indeed
233 > tricky to do. More thoughts on influence lists a bit below. --[[Joey]] 
234
235 ---- 
236
237 ### Link dependencies
238
239 * `add_depends($page, $spec, links => 1, presence => 1)`
240   adds a links + presence dependency.
241 * Use backlinks change code to detect changes to link dependencies too.
242 * So, brokenlinks can fire whenever any links in any of the
243   pages it's tracking change, or when pages are added or
244   removed.
245 * To determine if a pagespec is valid to be used with a links dependency,
246   use the same set that are valid for presence dependencies. But also
247   allow `backlinks()` to be used in it, since that matches pages
248   that the page links to, which is just what link dependencies are
249   triggered on.
250
251 [[done]]
252 ----
253
254 ### the removal problem
255
256 So far I have not addressed fixing the removal problem (which Will
257 discusses above).
258
259 Summary of problem: A has a dependency on a pagespec such as
260 "bugs/* and !link(done)". B currently matches. Then B is updated,
261 in a way that makes A's dependency not match it (ie, it links to done).
262 Now A is not updated, because ikiwiki does not realize that it
263 depended on B before.
264
265 This was worked around to fix [[bugs/inline_page_not_updated_on_removal]]
266 by inline and map adding explicit dependencies on each page that appears
267 on them. Then a change to B triggers the explicit dep. While this works,
268 it's 1) ugly 2) probably not implemented by all plugins that could
269 be affected by this problem (ie, linkmap) and 3) is most of the reason why
270 we grew the complication of `depends_simple`.
271
272 One way to fix this is to include with each dependency, a list of pages
273 that currently match it. If the list changes, the dependency is triggered.
274
275 Should be doable, but may involve more work than
276 currently. Consider that a dependency on "bugs/*" currently
277 is triggered by just checking until *one* page is found to match it.
278 But to store the list, *every* page would have to be tried against it.
279 Unless the list can somehow be intelligently updated, looking at only the
280 changed pages.
281
282 ----
283
284 Found a further complication in presence dependencies. Map now uses
285 presence dependencies when adding its explicit dependencies on pages. But
286 this defeats the purpose of the explicit dependencies! Because, now,
287 when B is changed to not match a pagespec, the A's presence dep does
288 not fire.
289
290 I didn't think things through when switching it to use presence
291 dependencies there. But, if I change it to use full dependencies, then all
292 the work that was done to allow map to use presence dependencies for its
293 main pagespec is for naught. The map will once again have to update
294 whenever *any* content of the page changes.
295
296 This points toward the conclusion that explicit dependencies, however they
297 are added, are not the right solution at all. Some other approach, such as
298 maintaining the list of pages that match a dependency, and noticing when it
299 changes, is needed.
300
301 ----
302
303 ### pagespec influence lists
304
305 I'm using this term for the concept of a list of pages whose modification
306 can indirectly influence what pages a pagespec matches.
307
308 #### Examples
309
310 * The pagespec "created_before(foo)" has an influence list that contains foo.
311   The removal or (re)creation of foo changes what pages match it.
312
313 * The pagespec "foo" has an empty influence list. This is because a
314   modification/creation/removal of foo directly changes what the pagespec
315   matches.
316
317 * The pagespec "*" has an empty influence list, for the same reason.
318   Avoiding including every page in the wiki into its influence list is
319   very important!
320
321 * The pagespec "title(foo)" has an influence list that contains every page
322   that currently matches it. A change to any matching page can change its
323   title. Why is that considered an indirect influence? Well, the pagespec
324   might be used in a presence dependency, and so its title changing
325   would not directly affect the dependency.
326
327 * The pagespec "backlink(index)" has an influence list
328   that contains index (because a change to index changes the backlinks).
329
330 * The pagespec "link(done)" has an influence list that
331   contains every page that it matches. A change to any matching page can
332   remove a link and make it not match any more, and so the list is needed
333   due to the removal problem.
334
335 #### Low-level Calculation
336
337 One way to calculate a pagespec's influence would be to
338 expand the SuccessReason and FailReason objects used and returned
339 by `pagespec_match`. Make the objects be created with an
340 influence list included, and when the objects are ANDed or ORed
341 together, combine the influence lists.
342
343 That would have the benefit of allowing just using the existing `match_*`
344 functions, with minor changes to a few of them to gather influence info.
345
346 But does it work? Let's try some examples:
347
348 Consider "bugs/* and link(done) and backlink(index)".
349
350 Its influence list contains index, and it contains all pages that the whole
351 pagespec matches. It should, ideally, not contain all pages that link
352 to done. There are a lot of such pages, and only a subset influence this
353 pagespec.
354
355 When matching this pagespec against a page, the `link` will put the page
356 on the list. The `backlink` will put index on the list, and they will be
357 anded together and combined. If we combine the influences from each
358 successful match, we get the right result.
359
360 Now consider "bugs/* and link(done) and !backlink(index)".
361
362 It influence list is the same as the previous one, even though a term has
363 been negated. Because a change to index still influences it, though in a
364 different way.
365
366 If negation of a SuccessReason preserves the influence list, the right
367 influence list will be calculated.
368
369 Consider "bugs/* and (link(done) or backlink(index))"
370 and      "bugs/* and (backlink(index) or link(done))'
371
372 Its clear that the influence lists for these are identical. And they
373 contain index, plus all matching pages.
374
375 When matching the first against page P, the `link` will put P on the list.
376 The OR needs to be a non-short-circuiting type. (In perl, `or`, not `||` --
377 so, `pagespec_translate` will need to be changed to not use `||`.)
378 Given that, the `backlink` will always be evalulated, and will put index
379 onto the influence list. If we combine the influences from each
380 successful match, we get the right result.
381
382 > This is implemented, seems to work ok. --[[Joey]] 
383
384 #### High-level Calculation and Storage
385
386 Calculating the full influence list for a pagespec requires trying to match
387 it against every page in the wiki. 
388
389 I'd like to avoid doing such expensive matching redundantly. So add a
390 `pagespec_match_all`, which returns a list of all pages in the whole
391 wiki that match the pagespec, and also adds the pagespec as a dependency,
392 and while it's at it, calculates and stores the influence list.
393
394 It could have an optional sort parameter, and limit parameter, to control
395 how many items to return and the sort order. So when inline wants to
396 display the 10 newest, only the influence lists for those ten are added.
397
398 If `pagespec_match_depends` can be used by all plugins, then great,
399 influences are automatically calculated, no extra work needs to be done.
400
401 If not, and some plugins still need to use `pagespec_match_list` or
402 `pagespec_match`, and `add_depends`, then I guess that `add_depends` can do
403 a slightly more expensive influence calculation.
404
405 Bonus: If `add_depends` is doing an influence calculation, then I can remove
406 the nasty hack it currently uses to decide if a given pagespec is safe to use
407 with an existence or links dependency.
408
409 Where to store the influence list? Well, it appears that we can just add
410 (content) dependencies for each item on the list, to the page's
411 regular list of simple dependencies. So, the data stored ends up looking
412 just like what is stored today by the explicit dependency hacks. Except,
413 it's calculated more smartly, and is added automatically.
414
415 > I've implemented influence calculation in `add_depends`. As expected,
416 > it means rather a lot more work, and makes some things much slower.
417 > Optimisation via `pagespec_match_depends` next.. --[[Joey]] 
418
419 #### Influence types
420
421 Note that influences can also have types, same as dependency types.
422 For example, "backlink(foo)" has an influence of foo, of type links.
423 "created_before(foo)" also is influenced by foo, but it's a presence
424 type. Etc.