ASoC: remove BROKEN from Efika and pcm030 fabric drivers The needed spin_event_timeout() macro is now merged in from the powerpc tree, so these drivers are no longer broken. This reverts commit 0c0e09e21a9e7bc6ca54e06ef3d497255ca26383 (ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolved) Tested against 2.6.31-rc1. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: Fix typo in MPC5200 PSC AC97 driver Kconfig ALSA SoC drivers should be specify SND_SOC_AC97_BUS instead, not AC97_BUS. Without SND_SOC_AC97_BUS defined, an AC97 device will not get correctly registered on the AC97 bus, which prevents thinks like the WM9712 touchscreen driver from getting probed. Tested against 2.6.31-rc1. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolved These drivers use spin_event_timeout() which is only present in the PowerPC tree at present and which is undergoing some API revisions so temporarily mark them as BROKEN until these issues are sorted out. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: AC97 driver for mpc5200 I've implemented retries for when the AC97 hardware doesn't reset on first try. About 10% of the time both the Efika and pcm030 AC97 codecs don't reset on first try and need to be poked multiple times. Failure is indicated by not having the link clock start ticking. Every once in a while even five pokes won't get the link started and I have to power cycle. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: Main rewite of the mpc5200 audio DMA code Rewrite the mpc5200 audio DMA code to support both I2S and AC97. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: Basic split of mpc5200 DMA code out of mpc5200_psc_i2s Basic split of mpc5200 DMA code out from i2s into a standalone file. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: remove stand-alone mode support from CS4270 codec driver The CS4270 supports stand-alone mode, where the codec is not connect to the I2C or SPI buses. Instead, input voltages configure the codec at power-on. The CS4270 ASoC device driver has partial support for this mode, but the code was never tested, and partial support doesn't help anyone. It also made the rest of the code more complicated than necessary. [Removed redundant CS4270 dependency on I2C -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: Allow Freescale MPC8610 audio drivers to be compiled as modules Change the Kconfig and Makefile options for Freescale MPC8610 audio drivers so that they can be compiled as modules, and simplify the Kconfig choices so that only the platform is selected. Also fix the naming of the driver files to conform to ALSA standards. [Removed extraneous SND_SOC dependency -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
powerpc/mpc5200: fix bestcomm Kconfig dependencies Without this patch it is possible to select drivers which require bestcomm support without bestcomm support being selected. This patch reworks the bestcomm dependencies to ensure the correct bestcomm tasks are always enabled. Reported-by: Hans Lehmann <hans.lehmann@ritter-elektronik.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
ALSA: ASoC: Add mpc5200-psc I2S driver This is an I2S bus driver for the MPC5200 PSC device. It depends on the soc-of helper functions to match a PSC device with a codec based on data in the device tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers Simple utility layer for creating ASoC machine instances based on data in the OpenFirmware device tree. OF aware platform drivers and codec drivers register themselves with this framework and the framework automatically instantiates a machine driver. At the moment, the driver is not very capable and it is expected to be extended as more features are needed for specifying the configuration in the device tree. This is most likely temporary glue code to work around limitations in the ASoC v1 framework. When v2 is merged, most of this driver will need to be reworked. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: asoc: kbuild - only show menus for the current ASoC CPU platform. We don't want to see ASoC platform menus for other non selected architectures in our config. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
[ALSA] Add ASoC drivers for the Freescale MPC8610 SoC Add the ASoC drivers for the Freescale MPC8610 SoC and the MPC8610 HPCD reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>