Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Wireless LAN device configuration | |
3 | # | |
4 | ||
5 | menu "Wireless LAN (non-hamradio)" | |
6 | depends on NETDEVICES | |
7 | ||
8 | config NET_RADIO | |
d86b5e0e AB |
9 | bool "Wireless LAN drivers (non-hamradio)" |
10 | select WIRELESS_EXT | |
1da177e4 LT |
11 | ---help--- |
12 | Support for wireless LANs and everything having to do with radio, | |
13 | but not with amateur radio or FM broadcasting. | |
14 | ||
15 | Saying Y here also enables the Wireless Extensions (creates | |
16 | /proc/net/wireless and enables iwconfig access). The Wireless | |
17 | Extension is a generic API allowing a driver to expose to the user | |
18 | space configuration and statistics specific to common Wireless LANs. | |
19 | The beauty of it is that a single set of tool can support all the | |
20 | variations of Wireless LANs, regardless of their type (as long as | |
21 | the driver supports Wireless Extension). Another advantage is that | |
22 | these parameters may be changed on the fly without restarting the | |
23 | driver (or Linux). If you wish to use Wireless Extensions with | |
24 | wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch | |
25 | the tools from | |
26 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
27 | ||
1da177e4 LT |
28 | # Note : the cards are obsolete (can't buy them anymore), but the drivers |
29 | # are not, as people are still using them... | |
30 | comment "Obsolete Wireless cards support (pre-802.11)" | |
31 | depends on NET_RADIO && (INET || ISA || PCMCIA) | |
32 | ||
33 | config STRIP | |
34 | tristate "STRIP (Metricom starmode radio IP)" | |
35 | depends on NET_RADIO && INET | |
36 | ---help--- | |
37 | Say Y if you have a Metricom radio and intend to use Starmode Radio | |
38 | IP. STRIP is a radio protocol developed for the MosquitoNet project | |
39 | (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet | |
40 | traffic using Metricom radios. Metricom radios are small, battery | |
41 | powered, 100kbit/sec packet radio transceivers, about the size and | |
42 | weight of a cellular telephone. (You may also have heard them called | |
43 | "Metricom modems" but we avoid the term "modem" because it misleads | |
44 | many people into thinking that you can plug a Metricom modem into a | |
45 | phone line and use it as a modem.) | |
46 | ||
47 | You can use STRIP on any Linux machine with a serial port, although | |
48 | it is obviously most useful for people with laptop computers. If you | |
49 | think you might get a Metricom radio in the future, there is no harm | |
50 | in saying Y to STRIP now, except that it makes the kernel a bit | |
51 | bigger. | |
52 | ||
53 | To compile this as a module, choose M here: the module will be | |
54 | called strip. | |
55 | ||
56 | config ARLAN | |
57 | tristate "Aironet Arlan 655 & IC2200 DS support" | |
58 | depends on NET_RADIO && ISA && !64BIT | |
59 | ---help--- | |
60 | Aironet makes Arlan, a class of wireless LAN adapters. These use the | |
61 | www.Telxon.com chip, which is also used on several similar cards. | |
62 | This driver is tested on the 655 and IC2200 series cards. Look at | |
63 | <http://www.ylenurme.ee/~elmer/655/> for the latest information. | |
64 | ||
65 | The driver is built as two modules, arlan and arlan-proc. The latter | |
66 | is the /proc interface and is not needed most of time. | |
67 | ||
68 | On some computers the card ends up in non-valid state after some | |
69 | time. Use a ping-reset script to clear it. | |
70 | ||
71 | config WAVELAN | |
72 | tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" | |
73 | depends on NET_RADIO && ISA | |
74 | ---help--- | |
75 | The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is | |
76 | a Radio LAN (wireless Ethernet-like Local Area Network) using the | |
77 | radio frequencies 900 MHz and 2.4 GHz. | |
78 | ||
79 | This driver support the ISA version of the WaveLAN card. A separate | |
80 | driver for the PCMCIA (PC-card) hardware is available in David | |
81 | Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> | |
82 | for location). | |
83 | ||
84 | If you want to use an ISA WaveLAN card under Linux, say Y and read | |
85 | the Ethernet-HOWTO, available from | |
86 | <http://www.tldp.org/docs.html#howto>. Some more specific | |
87 | information is contained in | |
88 | <file:Documentation/networking/wavelan.txt> and in the source code | |
89 | <file:drivers/net/wavelan.p.h>. | |
90 | ||
91 | You will also need the wireless tools package available from | |
92 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
93 | Please read the man pages contained therein. | |
94 | ||
95 | To compile this driver as a module, choose M here: the module will be | |
96 | called wavelan. | |
97 | ||
98 | config PCMCIA_WAVELAN | |
99 | tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" | |
100 | depends on NET_RADIO && PCMCIA | |
101 | help | |
102 | Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA | |
103 | (PC-card) wireless Ethernet networking card to your computer. This | |
104 | driver is for the non-IEEE-802.11 Wavelan cards. | |
105 | ||
106 | To compile this driver as a module, choose M here: the module will be | |
107 | called wavelan_cs. If unsure, say N. | |
108 | ||
109 | config PCMCIA_NETWAVE | |
110 | tristate "Xircom Netwave AirSurfer Pcmcia wireless support" | |
111 | depends on NET_RADIO && PCMCIA | |
112 | help | |
113 | Say Y here if you intend to attach this type of PCMCIA (PC-card) | |
114 | wireless Ethernet networking card to your computer. | |
115 | ||
116 | To compile this driver as a module, choose M here: the module will be | |
117 | called netwave_cs. If unsure, say N. | |
118 | ||
119 | comment "Wireless 802.11 Frequency Hopping cards support" | |
120 | depends on NET_RADIO && PCMCIA | |
121 | ||
122 | config PCMCIA_RAYCS | |
123 | tristate "Aviator/Raytheon 2.4MHz wireless support" | |
124 | depends on NET_RADIO && PCMCIA | |
125 | ---help--- | |
126 | Say Y here if you intend to attach an Aviator/Raytheon PCMCIA | |
127 | (PC-card) wireless Ethernet networking card to your computer. | |
128 | Please read the file <file:Documentation/networking/ray_cs.txt> for | |
129 | details. | |
130 | ||
131 | To compile this driver as a module, choose M here: the module will be | |
132 | called ray_cs. If unsure, say N. | |
133 | ||
134 | comment "Wireless 802.11b ISA/PCI cards support" | |
135 | depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) | |
136 | ||
2c86c275 JK |
137 | config IPW2100 |
138 | tristate "Intel PRO/Wireless 2100 Network Connection" | |
139 | depends on NET_RADIO && PCI && IEEE80211 | |
140 | select FW_LOADER | |
141 | ---help--- | |
142 | A driver for the Intel PRO/Wireless 2100 Network | |
143 | Connection 802.11b wireless network adapter. | |
144 | ||
145 | See <file:Documentation/networking/README.ipw2100> for information on | |
146 | the capabilities currently enabled in this driver and for tips | |
147 | for debugging issues and problems. | |
148 | ||
149 | In order to use this driver, you will need a firmware image for it. | |
150 | You can obtain the firmware from | |
151 | <http://ipw2100.sf.net/>. Once you have the firmware image, you | |
152 | will need to place it in /etc/firmware. | |
153 | ||
154 | You will also very likely need the Wireless Tools in order to | |
155 | configure your card: | |
156 | ||
157 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
158 | ||
159 | If you want to compile the driver as a module ( = code which can be | |
9c782e3b | 160 | inserted in and removed from the running kernel whenever you want), |
2c86c275 JK |
161 | say M here and read <file:Documentation/modules.txt>. The module |
162 | will be called ipw2100.ko. | |
163 | ||
53788015 | 164 | config IPW2100_MONITOR |
2c86c275 JK |
165 | bool "Enable promiscuous mode" |
166 | depends on IPW2100 | |
167 | ---help--- | |
168 | Enables promiscuous/monitor mode support for the ipw2100 driver. | |
169 | With this feature compiled into the driver, you can switch to | |
170 | promiscuous mode via the Wireless Tool's Monitor mode. While in this | |
171 | mode, no packets can be sent. | |
172 | ||
0f52bf90 | 173 | config IPW2100_DEBUG |
2c86c275 JK |
174 | bool "Enable full debugging output in IPW2100 module." |
175 | depends on IPW2100 | |
176 | ---help--- | |
177 | This option will enable debug tracing output for the IPW2100. | |
178 | ||
179 | This will result in the kernel module being ~60k larger. You can | |
180 | control which debug output is sent to the kernel log by setting the | |
181 | value in | |
182 | ||
183 | /sys/bus/pci/drivers/ipw2100/debug_level | |
184 | ||
185 | This entry will only exist if this option is enabled. | |
186 | ||
187 | If you are not trying to debug or develop the IPW2100 driver, you | |
188 | most likely want to say N here. | |
189 | ||
43f66a6c JK |
190 | config IPW2200 |
191 | tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" | |
c75f4742 | 192 | depends on NET_RADIO && IEEE80211 && PCI |
43f66a6c | 193 | select FW_LOADER |
43f66a6c JK |
194 | ---help--- |
195 | A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network | |
196 | Connection adapters. | |
197 | ||
198 | See <file:Documentation/networking/README.ipw2200> for | |
199 | information on the capabilities currently enabled in this | |
200 | driver and for tips for debugging issues and problems. | |
201 | ||
202 | In order to use this driver, you will need a firmware image for it. | |
203 | You can obtain the firmware from | |
204 | <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 | |
205 | for information on where to install the firmare images. | |
206 | ||
207 | You will also very likely need the Wireless Tools in order to | |
208 | configure your card: | |
209 | ||
210 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
211 | ||
212 | If you want to compile the driver as a module ( = code which can be | |
9c782e3b | 213 | inserted in and removed from the running kernel whenever you want), |
43f66a6c JK |
214 | say M here and read <file:Documentation/modules.txt>. The module |
215 | will be called ipw2200.ko. | |
216 | ||
0f52bf90 | 217 | config IPW2200_DEBUG |
43f66a6c JK |
218 | bool "Enable full debugging output in IPW2200 module." |
219 | depends on IPW2200 | |
220 | ---help--- | |
221 | This option will enable debug tracing output for the IPW2200. | |
222 | ||
223 | This will result in the kernel module being ~100k larger. You can | |
224 | control which debug output is sent to the kernel log by setting the | |
225 | value in | |
226 | ||
227 | /sys/bus/pci/drivers/ipw2200/debug_level | |
228 | ||
229 | This entry will only exist if this option is enabled. | |
230 | ||
231 | To set a value, simply echo an 8-byte hex value to the same file: | |
232 | ||
233 | % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level | |
234 | ||
235 | You can find the list of debug mask values in | |
236 | drivers/net/wireless/ipw2200.h | |
237 | ||
238 | If you are not trying to debug or develop the IPW2200 driver, you | |
239 | most likely want to say N here. | |
240 | ||
1da177e4 LT |
241 | config AIRO |
242 | tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" | |
a39d3e79 AB |
243 | depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN) |
244 | select CRYPTO | |
1da177e4 LT |
245 | ---help--- |
246 | This is the standard Linux driver to support Cisco/Aironet ISA and | |
247 | PCI 802.11 wireless cards. | |
248 | It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X | |
249 | - with or without encryption) as well as card before the Cisco | |
250 | aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). | |
251 | ||
252 | This driver support both the standard Linux Wireless Extensions | |
253 | and Cisco proprietary API, so both the Linux Wireless Tools and the | |
254 | Cisco Linux utilities can be used to configure the card. | |
255 | ||
256 | The driver can be compiled as a module and will be named "airo". | |
257 | ||
258 | config HERMES | |
259 | tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" | |
260 | depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA) | |
261 | ---help--- | |
262 | A driver for 802.11b wireless cards based based on the "Hermes" or | |
263 | Intersil HFA384x (Prism 2) MAC controller. This includes the vast | |
264 | majority of the PCMCIA 802.11b cards (which are nearly all rebadges) | |
265 | - except for the Cisco/Aironet cards. Cards supported include the | |
266 | Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, | |
267 | Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, | |
268 | IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear | |
269 | MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel | |
270 | PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. | |
271 | ||
272 | This option includes the guts of the driver, but in order to | |
273 | actually use a card you will also need to enable support for PCMCIA | |
274 | Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. | |
275 | ||
276 | You will also very likely also need the Wireless Tools in order to | |
277 | configure your card and that /etc/pcmcia/wireless.opts works : | |
278 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> | |
279 | ||
280 | config APPLE_AIRPORT | |
281 | tristate "Apple Airport support (built-in)" | |
282 | depends on PPC_PMAC && HERMES | |
283 | help | |
284 | Say Y here to support the Airport 802.11b wireless Ethernet hardware | |
285 | built into the Macintosh iBook and other recent PowerPC-based | |
286 | Macintosh machines. This is essentially a Lucent Orinoco card with | |
287 | a non-standard interface | |
288 | ||
289 | config PLX_HERMES | |
8c09e16b PR |
290 | tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" |
291 | depends on PCI && HERMES | |
1da177e4 LT |
292 | help |
293 | Enable support for PCMCIA cards supported by the "Hermes" (aka | |
294 | orinoco) driver when used in PLX9052 based PCI adaptors. These | |
295 | adaptors are not a full PCMCIA controller but act as a more limited | |
296 | PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that | |
297 | 802.11b PCMCIA cards can be used in desktop machines. The Netgear | |
298 | MA301 is such an adaptor. | |
299 | ||
1da177e4 | 300 | config TMD_HERMES |
8c09e16b PR |
301 | tristate "Hermes in TMD7160 based PCI adaptor support" |
302 | depends on PCI && HERMES | |
1da177e4 LT |
303 | help |
304 | Enable support for PCMCIA cards supported by the "Hermes" (aka | |
305 | orinoco) driver when used in TMD7160 based PCI adaptors. These | |
306 | adaptors are not a full PCMCIA controller but act as a more limited | |
307 | PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that | |
308 | 802.11b PCMCIA cards can be used in desktop machines. | |
309 | ||
ec829051 PR |
310 | config NORTEL_HERMES |
311 | tristate "Nortel emobility PCI adaptor support" | |
312 | depends on PCI && HERMES | |
313 | help | |
314 | Enable support for PCMCIA cards supported by the "Hermes" (aka | |
315 | orinoco) driver when used in Nortel emobility PCI adaptors. These | |
316 | adaptors are not full PCMCIA controllers, but act as a more limited | |
317 | PCI <-> PCMCIA bridge. | |
318 | ||
1da177e4 | 319 | config PCI_HERMES |
8c09e16b PR |
320 | tristate "Prism 2.5 PCI 802.11b adaptor support" |
321 | depends on PCI && HERMES | |
1da177e4 LT |
322 | help |
323 | Enable support for PCI and mini-PCI 802.11b wireless NICs based on | |
324 | the Prism 2.5 chipset. These are true PCI cards, not the 802.11b | |
325 | PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also | |
326 | common. Some of the built-in wireless adaptors in laptops are of | |
327 | this variety. | |
328 | ||
329 | config ATMEL | |
330 | tristate "Atmel at76c50x chipset 802.11b support" | |
b16a228d | 331 | depends on NET_RADIO |
1da177e4 LT |
332 | select FW_LOADER |
333 | select CRC32 | |
334 | ---help--- | |
335 | A driver 802.11b wireless cards based on the Atmel fast-vnet | |
336 | chips. This driver supports standard Linux wireless extensions. | |
337 | ||
338 | Many cards based on this chipset do not have flash memory | |
339 | and need their firmware loaded at start-up. If yours is | |
340 | one of these, you will need to provide a firmware image | |
341 | to be loaded into the card by the driver. The Atmel | |
342 | firmware package can be downloaded from | |
343 | <http://www.thekelleys.org.uk/atmel> | |
344 | ||
345 | config PCI_ATMEL | |
346 | tristate "Atmel at76c506 PCI cards" | |
347 | depends on ATMEL && PCI | |
348 | ---help--- | |
349 | Enable support for PCI and mini-PCI cards containing the | |
350 | Atmel at76c506 chip. | |
351 | ||
352 | # If Pcmcia is compiled in, offer Pcmcia cards... | |
353 | comment "Wireless 802.11b Pcmcia/Cardbus cards support" | |
354 | depends on NET_RADIO && PCMCIA | |
355 | ||
356 | config PCMCIA_HERMES | |
357 | tristate "Hermes PCMCIA card support" | |
358 | depends on NET_RADIO && PCMCIA && HERMES | |
359 | ---help--- | |
360 | A driver for "Hermes" chipset based PCMCIA wireless adaptors, such | |
361 | as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ | |
362 | EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and | |
363 | others). It should also be usable on various Prism II based cards | |
364 | such as the Linksys, D-Link and Farallon Skyline. It should also | |
365 | work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. | |
366 | ||
367 | To use your PC-cards, you will need supporting software from David | |
368 | Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> | |
369 | for location). You also want to check out the PCMCIA-HOWTO, | |
370 | available from <http://www.tldp.org/docs.html#howto>. | |
371 | ||
372 | You will also very likely also need the Wireless Tools in order to | |
373 | configure your card and that /etc/pcmcia/wireless.opts works: | |
374 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
375 | ||
3a48c4c2 PR |
376 | config PCMCIA_SPECTRUM |
377 | tristate "Symbol Spectrum24 Trilogy PCMCIA card support" | |
378 | depends on NET_RADIO && PCMCIA && HERMES | |
379 | ---help--- | |
380 | ||
381 | This is a driver for 802.11b cards using RAM-loadable Symbol | |
382 | firmware, such as Symbol Wireless Networker LA4100, CompactFlash | |
383 | cards by Socket Communications and Intel PRO/Wireless 2011B. | |
384 | ||
385 | This driver requires firmware download on startup. Utilities | |
386 | for downloading Symbol firmware are available at | |
387 | <http://sourceforge.net/projects/orinoco/> | |
388 | ||
1da177e4 LT |
389 | config AIRO_CS |
390 | tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" | |
ab62c1e1 | 391 | depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) |
a39d3e79 | 392 | select CRYPTO |
1da177e4 LT |
393 | ---help--- |
394 | This is the standard Linux driver to support Cisco/Aironet PCMCIA | |
395 | 802.11 wireless cards. This driver is the same as the Aironet | |
396 | driver part of the Linux Pcmcia package. | |
397 | It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X | |
398 | - with or without encryption) as well as card before the Cisco | |
399 | aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also | |
400 | supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom | |
401 | 802.11b cards. | |
402 | ||
403 | This driver support both the standard Linux Wireless Extensions | |
404 | and Cisco proprietary API, so both the Linux Wireless Tools and the | |
405 | Cisco Linux utilities can be used to configure the card. | |
406 | ||
407 | To use your PC-cards, you will need supporting software from David | |
408 | Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> | |
409 | for location). You also want to check out the PCMCIA-HOWTO, | |
410 | available from <http://www.tldp.org/docs.html#howto>. | |
411 | ||
412 | config PCMCIA_ATMEL | |
413 | tristate "Atmel at76c502/at76c504 PCMCIA cards" | |
414 | depends on NET_RADIO && ATMEL && PCMCIA | |
415 | select FW_LOADER | |
416 | select CRC32 | |
417 | ---help--- | |
418 | Enable support for PCMCIA cards containing the | |
419 | Atmel at76c502 and at76c504 chips. | |
420 | ||
421 | config PCMCIA_WL3501 | |
422 | tristate "Planet WL3501 PCMCIA cards" | |
423 | depends on NET_RADIO && EXPERIMENTAL && PCMCIA | |
424 | ---help--- | |
425 | A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. | |
426 | It has basic support for Linux wireless extensions and initial | |
427 | micro support for ethtool. | |
428 | ||
429 | comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support" | |
430 | depends on NET_RADIO && PCI | |
431 | config PRISM54 | |
432 | tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' | |
433 | depends on PCI && NET_RADIO && EXPERIMENTAL | |
434 | select FW_LOADER | |
435 | ---help--- | |
436 | Enable PCI and Cardbus support for the following chipset based cards: | |
437 | ||
438 | ISL3880 - Prism GT 802.11 b/g | |
439 | ISL3877 - Prism Indigo 802.11 a | |
440 | ISL3890 - Prism Duette 802.11 a/b/g | |
441 | ||
442 | For a complete list of supported cards visit <http://prism54.org>. | |
443 | Here is the latest confirmed list of supported cards: | |
444 | ||
c8920ba0 | 445 | 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) |
1da177e4 LT |
446 | Allnet ALL0271 PCI Card |
447 | Compex WL54G Cardbus Card | |
448 | Corega CG-WLCB54GT Cardbus Card | |
449 | D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 | |
450 | I-O Data WN-G54/CB Cardbus Card | |
451 | Kobishi XG-300 aka Z-Com Cardbus Card | |
452 | Netgear WG511 Cardbus Card | |
453 | Ovislink WL-5400PCI PCI Card | |
454 | Peabird WLG-PCI PCI Card | |
455 | Sitecom WL-100i Cardbus Card | |
456 | Sitecom WL-110i PCI Card | |
457 | SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card | |
458 | SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card | |
459 | SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card | |
460 | Z-Com XG-900 PCI Card | |
461 | Zyxel G-100 Cardbus Card | |
462 | ||
463 | If you enable this you will need a firmware file as well. | |
464 | You will need to copy this to /usr/lib/hotplug/firmware/isl3890. | |
465 | You can get this non-GPL'd firmware file from the Prism54 project page: | |
466 | <http://prism54.org> | |
467 | You will also need the /etc/hotplug/firmware.agent script from | |
468 | a current hotplug package. | |
469 | ||
470 | Note: You need a motherboard with DMA support to use any of these cards | |
471 | ||
472 | If you want to compile the driver as a module ( = code which can be | |
473 | inserted in and removed from the running kernel whenever you want), | |
474 | say M here and read <file:Documentation/modules.txt>. The module | |
475 | will be called prism54.ko. | |
476 | ||
ff1d2767 JM |
477 | source "drivers/net/wireless/hostap/Kconfig" |
478 | ||
1da177e4 LT |
479 | # yes, this works even when no drivers are selected |
480 | config NET_WIRELESS | |
481 | bool | |
482 | depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) | |
483 | default y | |
484 | ||
485 | endmenu | |
486 |