Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | #ifndef _ATMMPC_H_ |
2 | #define _ATMMPC_H_ | |
3 | ||
4 | #include <linux/atmapi.h> | |
5 | #include <linux/atmioc.h> | |
6 | #include <linux/atm.h> | |
7 | ||
8 | #define ATMMPC_CTRL _IO('a', ATMIOC_MPOA) | |
9 | #define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1) | |
10 | ||
11 | #define MPC_SOCKET_INGRESS 1 | |
12 | #define MPC_SOCKET_EGRESS 2 | |
13 | ||
14 | struct atmmpc_ioc { | |
15 | int dev_num; | |
16 | uint32_t ipaddr; /* the IP address of the shortcut */ | |
17 | int type; /* ingress or egress */ | |
18 | }; | |
19 | ||
20 | typedef struct in_ctrl_info { | |
21 | uint8_t Last_NHRP_CIE_code; | |
22 | uint8_t Last_Q2931_cause_value; | |
23 | uint8_t eg_MPC_ATM_addr[ATM_ESA_LEN]; | |
24 | uint32_t tag; | |
25 | uint32_t in_dst_ip; /* IP address this ingress MPC sends packets to */ | |
26 | uint16_t holding_time; | |
27 | uint32_t request_id; | |
28 | } in_ctrl_info; | |
29 | ||
30 | typedef struct eg_ctrl_info { | |
31 | uint8_t DLL_header[256]; | |
32 | uint8_t DH_length; | |
33 | uint32_t cache_id; | |
34 | uint32_t tag; | |
35 | uint32_t mps_ip; | |
36 | uint32_t eg_dst_ip; /* IP address to which ingress MPC sends packets */ | |
37 | uint8_t in_MPC_data_ATM_addr[ATM_ESA_LEN]; | |
38 | uint16_t holding_time; | |
39 | } eg_ctrl_info; | |
40 | ||
41 | struct mpc_parameters { | |
42 | uint16_t mpc_p1; /* Shortcut-Setup Frame Count */ | |
43 | uint16_t mpc_p2; /* Shortcut-Setup Frame Time */ | |
44 | uint8_t mpc_p3[8]; /* Flow-detection Protocols */ | |
45 | uint16_t mpc_p4; /* MPC Initial Retry Time */ | |
46 | uint16_t mpc_p5; /* MPC Retry Time Maximum */ | |
47 | uint16_t mpc_p6; /* Hold Down Time */ | |
48 | } ; | |
49 | ||
50 | struct k_message { | |
51 | uint16_t type; | |
52 | uint32_t ip_mask; | |
53 | uint8_t MPS_ctrl[ATM_ESA_LEN]; | |
54 | union { | |
55 | in_ctrl_info in_info; | |
56 | eg_ctrl_info eg_info; | |
57 | struct mpc_parameters params; | |
58 | } content; | |
59 | struct atm_qos qos; | |
60 | } __ATM_API_ALIGN; | |
61 | ||
62 | struct llc_snap_hdr { | |
63 | /* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */ | |
64 | uint8_t dsap; /* Destination Service Access Point (0xAA) */ | |
65 | uint8_t ssap; /* Source Service Access Point (0xAA) */ | |
66 | uint8_t ui; /* Unnumbered Information (0x03) */ | |
67 | uint8_t org[3]; /* Organizational identification (0x000000) */ | |
68 | uint8_t type[2]; /* Ether type (for IP) (0x0800) */ | |
69 | }; | |
70 | ||
71 | /* TLVs this MPC recognizes */ | |
72 | #define TLV_MPOA_DEVICE_TYPE 0x00a03e2a | |
73 | ||
74 | /* MPOA device types in MPOA Device Type TLV */ | |
75 | #define NON_MPOA 0 | |
76 | #define MPS 1 | |
77 | #define MPC 2 | |
78 | #define MPS_AND_MPC 3 | |
79 | ||
80 | ||
81 | /* MPC parameter defaults */ | |
82 | ||
83 | #define MPC_P1 10 /* Shortcut-Setup Frame Count */ | |
84 | #define MPC_P2 1 /* Shortcut-Setup Frame Time */ | |
85 | #define MPC_P3 0 /* Flow-detection Protocols */ | |
86 | #define MPC_P4 5 /* MPC Initial Retry Time */ | |
87 | #define MPC_P5 40 /* MPC Retry Time Maximum */ | |
88 | #define MPC_P6 160 /* Hold Down Time */ | |
89 | #define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */ | |
90 | ||
91 | /* MPC constants */ | |
92 | ||
93 | #define MPC_C1 2 /* Retry Time Multiplier */ | |
94 | #define MPC_C2 60 /* Initial Keep-Alive Lifetime */ | |
95 | ||
96 | /* Message types - to MPOA daemon */ | |
97 | ||
98 | #define SND_MPOA_RES_RQST 201 | |
99 | #define SET_MPS_CTRL_ADDR 202 | |
100 | #define SND_MPOA_RES_RTRY 203 /* Different type in a retry due to req id */ | |
101 | #define STOP_KEEP_ALIVE_SM 204 | |
102 | #define EGRESS_ENTRY_REMOVED 205 | |
103 | #define SND_EGRESS_PURGE 206 | |
104 | #define DIE 207 /* tell the daemon to exit() */ | |
105 | #define DATA_PLANE_PURGE 208 /* Data plane purge because of egress cache hit miss or dead MPS */ | |
106 | #define OPEN_INGRESS_SVC 209 | |
107 | ||
108 | /* Message types - from MPOA daemon */ | |
109 | ||
110 | #define MPOA_TRIGGER_RCVD 101 | |
111 | #define MPOA_RES_REPLY_RCVD 102 | |
112 | #define INGRESS_PURGE_RCVD 103 | |
113 | #define EGRESS_PURGE_RCVD 104 | |
114 | #define MPS_DEATH 105 | |
115 | #define CACHE_IMPOS_RCVD 106 | |
116 | #define SET_MPC_CTRL_ADDR 107 /* Our MPC's control ATM address */ | |
117 | #define SET_MPS_MAC_ADDR 108 | |
118 | #define CLEAN_UP_AND_EXIT 109 | |
119 | #define SET_MPC_PARAMS 110 /* MPC configuration parameters */ | |
120 | ||
121 | /* Message types - bidirectional */ | |
122 | ||
123 | #define RELOAD 301 /* kill -HUP the daemon for reload */ | |
124 | ||
125 | #endif /* _ATMMPC_H_ */ |