Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Host Controller Drivers | |
3 | # | |
4 | comment "USB Host Controller Drivers" | |
5 | depends on USB | |
6 | ||
7 | config USB_EHCI_HCD | |
8 | tristate "EHCI HCD (USB 2.0) support" | |
76fa9a24 | 9 | depends on USB && USB_ARCH_HAS_EHCI |
1da177e4 LT |
10 | ---help--- |
11 | The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 | |
12 | "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. | |
13 | If your USB host controller supports USB 2.0, you will likely want to | |
b3c29d85 JJ |
14 | configure this Host Controller Driver. At the time of this writing, |
15 | the primary implementation of EHCI is a chip from NEC, widely available | |
16 | in add-on PCI cards, but implementations are in the works from other | |
17 | vendors including Intel and Philips. Motherboard support is appearing. | |
1da177e4 LT |
18 | |
19 | EHCI controllers are packaged with "companion" host controllers (OHCI | |
20 | or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports | |
b3c29d85 | 21 | will connect to EHCI if the device is high speed, otherwise they |
1da177e4 LT |
22 | connect to a companion controller. If you configure EHCI, you should |
23 | probably configure the OHCI (for NEC and some other vendors) USB Host | |
24 | Controller Driver or UHCI (for Via motherboards) Host Controller | |
25 | Driver too. | |
26 | ||
27 | You may want to read <file:Documentation/usb/ehci.txt>. | |
28 | ||
29 | To compile this driver as a module, choose M here: the | |
30 | module will be called ehci-hcd. | |
31 | ||
32 | config USB_EHCI_SPLIT_ISO | |
33 | bool "Full speed ISO transactions (EXPERIMENTAL)" | |
34 | depends on USB_EHCI_HCD && EXPERIMENTAL | |
35 | default n | |
36 | ---help--- | |
37 | This code is new and hasn't been used with many different | |
38 | EHCI or USB 2.0 transaction translator implementations. | |
39 | It should work for ISO-OUT transfers, like audio. | |
40 | ||
41 | config USB_EHCI_ROOT_HUB_TT | |
42 | bool "Root Hub Transaction Translators (EXPERIMENTAL)" | |
43 | depends on USB_EHCI_HCD && EXPERIMENTAL | |
44 | ---help--- | |
45 | Some EHCI chips have vendor-specific extensions to integrate | |
46 | transaction translators, so that no OHCI or UHCI companion | |
47 | controller is needed. It's safe to say "y" even if your | |
48 | controller doesn't support this feature. | |
49 | ||
ba47f66b DS |
50 | This supports the EHCI implementation that's originally |
51 | from ARC, and has since changed hands a few times. | |
52 | ||
53 | config USB_EHCI_TT_NEWSCHED | |
54 | bool "Improved Transaction Translator scheduling (EXPERIMENTAL)" | |
55 | depends on USB_EHCI_HCD && EXPERIMENTAL | |
56 | ---help--- | |
57 | This changes the periodic scheduling code to fill more of the low | |
58 | and full speed bandwidth available from the Transaction Translator | |
59 | (TT) in USB 2.0 hubs. Without this, only one transfer will be | |
60 | issued in each microframe, significantly reducing the number of | |
61 | periodic low/fullspeed transfers possible. | |
62 | ||
63 | If you have multiple periodic low/fullspeed devices connected to a | |
64 | highspeed USB hub which is connected to a highspeed USB Host | |
65 | Controller, and some of those devices will not work correctly | |
66 | (possibly due to "ENOSPC" or "-28" errors), say Y. | |
67 | ||
68 | If unsure, say N. | |
1da177e4 | 69 | |
083522d7 BH |
70 | config USB_EHCI_BIG_ENDIAN_MMIO |
71 | bool | |
4d68c0be SR |
72 | depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX) |
73 | default y | |
083522d7 | 74 | |
6dbd682b SR |
75 | config USB_EHCI_BIG_ENDIAN_DESC |
76 | bool | |
4d68c0be SR |
77 | depends on USB_EHCI_HCD && 440EPX |
78 | default y | |
6dbd682b | 79 | |
ba02978a LY |
80 | config USB_EHCI_FSL |
81 | bool | |
82 | select USB_EHCI_ROOT_HUB_TT | |
83 | default y if MPC834x || PPC_MPC831x | |
84 | ---help--- | |
85 | Variation of ARC USB block used in some Freescale chips. | |
86 | ||
4808a1c0 OK |
87 | config USB_ISP116X_HCD |
88 | tristate "ISP116X HCD support" | |
89 | depends on USB | |
4808a1c0 OK |
90 | ---help--- |
91 | The ISP1160 and ISP1161 chips are USB host controllers. Enable this | |
92 | option if your board has this chip. If unsure, say N. | |
93 | ||
94 | This driver does not support isochronous transfers. | |
95 | ||
96 | To compile this driver as a module, choose M here: the | |
97 | module will be called isp116x-hcd. | |
98 | ||
1da177e4 LT |
99 | config USB_OHCI_HCD |
100 | tristate "OHCI HCD support" | |
101 | depends on USB && USB_ARCH_HAS_OHCI | |
102 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 | |
60bbfc84 | 103 | select I2C if ARCH_PNX4008 |
1da177e4 LT |
104 | ---help--- |
105 | The Open Host Controller Interface (OHCI) is a standard for accessing | |
106 | USB 1.1 host controller hardware. It does more in hardware than Intel's | |
107 | UHCI specification. If your USB host controller follows the OHCI spec, | |
108 | say Y. On most non-x86 systems, and on x86 hardware that's not using a | |
109 | USB controller from Intel or VIA, this is appropriate. If your host | |
110 | controller doesn't use PCI, this is probably appropriate. For a PCI | |
111 | based system where you're not sure, the "lspci -v" entry will list the | |
112 | right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. | |
113 | ||
114 | To compile this driver as a module, choose M here: the | |
115 | module will be called ohci-hcd. | |
116 | ||
117 | config USB_OHCI_HCD_PPC_SOC | |
118 | bool "OHCI support for on-chip PPC USB controller" | |
119 | depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) | |
120 | default y | |
11d1a4aa BH |
121 | select USB_OHCI_BIG_ENDIAN_DESC |
122 | select USB_OHCI_BIG_ENDIAN_MMIO | |
1da177e4 LT |
123 | ---help--- |
124 | Enables support for the USB controller on the MPC52xx or | |
125 | STB03xxx processor chip. If unsure, say Y. | |
126 | ||
495a678f SM |
127 | config USB_OHCI_HCD_PPC_OF |
128 | bool "OHCI support for PPC USB controller on OF platform bus" | |
129 | depends on USB_OHCI_HCD && PPC_OF | |
130 | default y | |
131 | ---help--- | |
132 | Enables support for the USB controller PowerPC present on the | |
133 | OpenFirmware platform bus. | |
134 | ||
135 | config USB_OHCI_HCD_PPC_OF_BE | |
136 | bool "Support big endian HC" | |
137 | depends on USB_OHCI_HCD_PPC_OF | |
138 | default y | |
139 | select USB_OHCI_BIG_ENDIAN_DESC | |
140 | select USB_OHCI_BIG_ENDIAN_MMIO | |
141 | ||
142 | config USB_OHCI_HCD_PPC_OF_LE | |
143 | bool "Support little endian HC" | |
144 | depends on USB_OHCI_HCD_PPC_OF | |
145 | default n | |
146 | select USB_OHCI_LITTLE_ENDIAN | |
147 | ||
1da177e4 LT |
148 | config USB_OHCI_HCD_PCI |
149 | bool "OHCI support for PCI-bus USB controllers" | |
495a678f | 150 | depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) |
1da177e4 LT |
151 | default y |
152 | select USB_OHCI_LITTLE_ENDIAN | |
153 | ---help--- | |
154 | Enables support for PCI-bus plug-in USB controller cards. | |
155 | If unsure, say Y. | |
156 | ||
c604e851 MB |
157 | config USB_OHCI_HCD_SSB |
158 | bool "OHCI support for Broadcom SSB OHCI core" | |
b22817b3 | 159 | depends on USB_OHCI_HCD && (SSB = y || SSB = CONFIG_USB_OHCI_HCD) && EXPERIMENTAL |
c604e851 MB |
160 | default n |
161 | ---help--- | |
162 | Support for the Sonics Silicon Backplane (SSB) attached | |
163 | Broadcom USB OHCI core. | |
164 | ||
165 | This device is present in some embedded devices with | |
166 | Broadcom based SSB bus. | |
167 | ||
168 | If unsure, say N. | |
169 | ||
11d1a4aa BH |
170 | config USB_OHCI_BIG_ENDIAN_DESC |
171 | bool | |
172 | depends on USB_OHCI_HCD | |
173 | default n | |
174 | ||
175 | config USB_OHCI_BIG_ENDIAN_MMIO | |
1da177e4 LT |
176 | bool |
177 | depends on USB_OHCI_HCD | |
178 | default n | |
179 | ||
180 | config USB_OHCI_LITTLE_ENDIAN | |
181 | bool | |
182 | depends on USB_OHCI_HCD | |
183 | default n if STB03xxx || PPC_MPC52xx | |
184 | default y | |
185 | ||
186 | config USB_UHCI_HCD | |
187 | tristate "UHCI HCD (most Intel and VIA) support" | |
188 | depends on USB && PCI | |
189 | ---help--- | |
190 | The Universal Host Controller Interface is a standard by Intel for | |
191 | accessing the USB hardware in the PC (which is also called the USB | |
192 | host controller). If your USB host controller conforms to this | |
193 | standard, you may want to say Y, but see below. All recent boards | |
194 | with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, | |
195 | i810, i820) conform to this standard. Also all VIA PCI chipsets | |
196 | (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro | |
197 | 133). If unsure, say Y. | |
198 | ||
199 | To compile this driver as a module, choose M here: the | |
200 | module will be called uhci-hcd. | |
201 | ||
d774efea TO |
202 | config USB_U132_HCD |
203 | tristate "Elan U132 Adapter Host Controller" | |
204 | depends on USB && USB_FTDI_ELAN | |
205 | default M | |
206 | help | |
207 | The U132 adapter is a USB to CardBus adapter specifically designed | |
208 | for PC cards that contain an OHCI host controller. Typical PC cards | |
209 | are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 | |
210 | adapter will *NOT* work with PC cards that do not contain an OHCI | |
211 | controller. | |
212 | ||
3cb2fccc | 213 | For those PC cards that contain multiple OHCI controllers only the |
d774efea TO |
214 | first one is used. |
215 | ||
216 | The driver consists of two modules, the "ftdi-elan" module is a | |
217 | USB client driver that interfaces to the FTDI chip within ELAN's | |
218 | USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host | |
219 | controller driver that talks to the OHCI controller within the | |
220 | CardBus cards that are inserted in the U132 adapter. | |
221 | ||
222 | This driver has been tested with a CardBus OHCI USB adapter, and | |
223 | worked with a USB PEN Drive inserted into the first USB port of | |
224 | the PCCARD. A rather pointless thing to do, but useful for testing. | |
225 | ||
226 | It is safe to say M here. | |
227 | ||
228 | See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> | |
229 | ||
1da177e4 LT |
230 | config USB_SL811_HCD |
231 | tristate "SL811HS HCD support" | |
232 | depends on USB | |
1da177e4 LT |
233 | help |
234 | The SL811HS is a single-port USB controller that supports either | |
235 | host side or peripheral side roles. Enable this option if your | |
236 | board has this chip, and you want to use it as a host controller. | |
237 | If unsure, say N. | |
238 | ||
239 | To compile this driver as a module, choose M here: the | |
240 | module will be called sl811-hcd. | |
241 | ||
c6de2b64 DB |
242 | config USB_SL811_CS |
243 | tristate "CF/PCMCIA support for SL811HS HCD" | |
244 | depends on USB_SL811_HCD && PCMCIA | |
c6de2b64 DB |
245 | help |
246 | Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC | |
247 | REX-CFU1U CF card (often used with PDAs). If unsure, say N. | |
248 | ||
249 | To compile this driver as a module, choose M here: the | |
250 | module will be called "sl811_cs". | |
251 | ||
5d304358 | 252 | config USB_R8A66597_HCD |
fa0de2b6 | 253 | tristate "R8A66597 HCD support" |
5d304358 YS |
254 | depends on USB |
255 | help | |
256 | The R8A66597 is a USB 2.0 host and peripheral controller. | |
257 | ||
258 | Enable this option if your board has this chip, and you want | |
259 | to use it as a host controller. If unsure, say N. | |
260 | ||
261 | To compile this driver as a module, choose M here: the | |
262 | module will be called r8a66597-hcd. | |
263 |