Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Serial device configuration | |
3 | # | |
4 | ||
5 | menu "USB Serial Converter support" | |
6 | depends on USB!=n | |
7 | ||
8 | config USB_SERIAL | |
9 | tristate "USB Serial Converter support" | |
10 | depends on USB | |
11 | ---help--- | |
12 | Say Y here if you have a USB device that provides normal serial | |
13 | ports, or acts like a serial device, and you want to connect it to | |
14 | your USB bus. | |
15 | ||
16 | Please read <file:Documentation/usb/usb-serial.txt> for more | |
17 | information on the specifics of the different devices that are | |
18 | supported, and on how to use them. | |
19 | ||
20 | To compile this driver as a module, choose M here: the | |
21 | module will be called usbserial. | |
22 | ||
23 | config USB_SERIAL_CONSOLE | |
24 | bool "USB Serial Console device support (EXPERIMENTAL)" | |
25 | depends on USB_SERIAL=y && EXPERIMENTAL | |
26 | ---help--- | |
27 | If you say Y here, it will be possible to use a USB to serial | |
28 | converter port as the system console (the system console is the | |
29 | device which receives all kernel messages and warnings and which | |
30 | allows logins in single user mode). This could be useful if some | |
31 | terminal or printer is connected to that serial port. | |
32 | ||
33 | Even if you say Y here, the currently visible virtual console | |
34 | (/dev/tty0) will still be used as the system console by default, but | |
35 | you can alter that using a kernel command line option such as | |
36 | "console=ttyUSB0". (Try "man bootparam" or see the documentation of | |
37 | your boot loader (lilo or loadlin) about how to pass options to the | |
38 | kernel at boot time.) | |
39 | ||
40 | If you don't have a VGA card installed and you say Y here, the | |
41 | kernel will automatically use the first USB to serial converter | |
42 | port, /dev/ttyUSB0, as system console. | |
43 | ||
44 | If unsure, say N. | |
45 | ||
46 | config USB_SERIAL_GENERIC | |
47 | bool "USB Generic Serial Driver" | |
48 | depends on USB_SERIAL | |
49 | help | |
50 | Say Y here if you want to use the generic USB serial driver. Please | |
51 | read <file:Documentation/usb/usb-serial.txt> for more information on | |
52 | using this driver. It is recommended that the "USB Serial converter | |
53 | support" be compiled as a module for this driver to be used | |
54 | properly. | |
55 | ||
3fe70ba2 | 56 | config USB_SERIAL_AIRCABLE |
23b0d968 | 57 | tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)" |
3fe70ba2 MFN |
58 | depends on USB_SERIAL && EXPERIMENTAL |
59 | help | |
23b0d968 | 60 | Say Y here if you want to use USB AIRcable Bluetooth Dongle. |
3fe70ba2 MFN |
61 | |
62 | To compile this driver as a module, choose M here: the module | |
63 | will be called aircable. | |
64 | ||
3b86b202 GK |
65 | config USB_SERIAL_AIRPRIME |
66 | tristate "USB AirPrime CDMA Wireless Driver" | |
67 | depends on USB_SERIAL | |
68 | help | |
69 | Say Y here if you want to use a AirPrime CDMA Wireless PC card. | |
70 | ||
71 | To compile this driver as a module, choose M here: the | |
72 | module will be called airprime. | |
73 | ||
815ddc99 GKH |
74 | config USB_SERIAL_ARK3116 |
75 | tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" | |
76 | depends on USB_SERIAL && EXPERIMENTAL | |
77 | help | |
78 | Say Y here if you want to use a ARK Micro 3116 USB to Serial | |
79 | device. | |
80 | ||
81 | To compile this driver as a module, choose M here: the | |
82 | module will be called ark3116 | |
83 | ||
1da177e4 LT |
84 | config USB_SERIAL_BELKIN |
85 | tristate "USB Belkin and Peracom Single Port Serial Driver" | |
86 | depends on USB_SERIAL | |
87 | help | |
88 | Say Y here if you want to use a Belkin USB Serial single port | |
89 | adaptor (F5U103 is one of the model numbers) or the Peracom single | |
90 | port USB to serial adapter. | |
91 | ||
92 | To compile this driver as a module, choose M here: the | |
93 | module will be called belkin_sa. | |
94 | ||
6ce76104 FK |
95 | config USB_SERIAL_CH341 |
96 | tristate "USB Winchiphead CH341 Single Port Serial Driver" | |
97 | depends on USB_SERIAL | |
98 | help | |
99 | Say Y here if you want to use a Winchiphead CH341 single port | |
100 | USB to serial adapter. | |
101 | ||
102 | To compile this driver as a module, choose M here: the | |
103 | module will be called ch341. | |
104 | ||
1da177e4 LT |
105 | config USB_SERIAL_WHITEHEAT |
106 | tristate "USB ConnectTech WhiteHEAT Serial Driver" | |
33f0f88f | 107 | depends on USB_SERIAL |
1da177e4 LT |
108 | help |
109 | Say Y here if you want to use a ConnectTech WhiteHEAT 4 port | |
110 | USB to serial converter device. | |
111 | ||
112 | To compile this driver as a module, choose M here: the | |
113 | module will be called whiteheat. | |
114 | ||
115 | config USB_SERIAL_DIGI_ACCELEPORT | |
116 | tristate "USB Digi International AccelePort USB Serial Driver" | |
117 | depends on USB_SERIAL | |
118 | ---help--- | |
119 | Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, | |
120 | 2 port (plus parallel port) and 4 port USB serial converters. The | |
121 | parallel port on the USB 2 appears as a third serial port on Linux. | |
122 | The Digi Acceleport USB 8 is not yet supported by this driver. | |
123 | ||
124 | This driver works under SMP with the usb-uhci driver. It does not | |
125 | work under SMP with the uhci driver. | |
126 | ||
127 | To compile this driver as a module, choose M here: the | |
128 | module will be called digi_acceleport. | |
129 | ||
130 | config USB_SERIAL_CP2101 | |
131 | tristate "USB CP2101 UART Bridge Controller" | |
132 | depends on USB_SERIAL && EXPERIMENTAL | |
133 | help | |
134 | Say Y here if you want to use a CP2101/CP2102 based USB to RS232 | |
135 | converter. | |
136 | ||
137 | To compile this driver as a module, choose M here: the | |
138 | module will be called cp2101. | |
139 | ||
140 | config USB_SERIAL_CYPRESS_M8 | |
141 | tristate "USB Cypress M8 USB Serial Driver" | |
142 | depends on USB_SERIAL && EXPERIMENTAL | |
143 | help | |
144 | Say Y here if you want to use a device that contains the Cypress | |
145 | USB to Serial microcontroller, such as the DeLorme Earthmate GPS. | |
146 | ||
147 | Attempted SMP support... send bug reports! | |
148 | ||
149 | Supported microcontrollers in the CY4601 family are: | |
150 | CY7C63741 CY7C63742 CY7C63743 CY7C64013 | |
151 | ||
152 | To compile this driver as a module, choose M here: the | |
153 | module will be called cypress_m8. | |
154 | ||
155 | config USB_SERIAL_EMPEG | |
156 | tristate "USB Empeg empeg-car Mark I/II Driver" | |
157 | depends on USB_SERIAL | |
158 | help | |
159 | Say Y here if you want to connect to your Empeg empeg-car Mark I/II | |
160 | mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} | |
161 | device node. See <file:Documentation/usb/usb-serial.txt> for more | |
162 | tidbits of information. | |
163 | ||
164 | To compile this driver as a module, choose M here: the | |
165 | module will be called empeg. | |
166 | ||
167 | config USB_SERIAL_FTDI_SIO | |
168 | tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)" | |
169 | depends on USB_SERIAL && EXPERIMENTAL | |
170 | ---help--- | |
171 | Say Y here if you want to use a FTDI SIO single port USB to serial | |
172 | converter device. The implementation I have is called the USC-1000. | |
173 | This driver has also be tested with the 245 and 232 devices. | |
174 | ||
175 | See <http://ftdi-usb-sio.sourceforge.net/> for more | |
176 | information on this driver and the device. | |
177 | ||
178 | To compile this driver as a module, choose M here: the | |
179 | module will be called ftdi_sio. | |
180 | ||
f9814802 GKH |
181 | config USB_SERIAL_FUNSOFT |
182 | tristate "USB Fundamental Software Dongle Driver" | |
88bf7b39 | 183 | depends on USB_SERIAL |
f9814802 GKH |
184 | ---help--- |
185 | Say Y here if you want to use the Fundamental Software dongle. | |
186 | ||
187 | To compile this driver as a module, choose M here: the | |
188 | module will be called funsoft. | |
189 | ||
1da177e4 LT |
190 | config USB_SERIAL_VISOR |
191 | tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" | |
192 | depends on USB_SERIAL | |
193 | help | |
194 | Say Y here if you want to connect to your HandSpring Visor, Palm | |
195 | m500 or m505 through its USB docking station. See | |
196 | <http://usbvisor.sourceforge.net/> for more information on using this | |
197 | driver. | |
198 | ||
199 | To compile this driver as a module, choose M here: the | |
200 | module will be called visor. | |
201 | ||
202 | config USB_SERIAL_IPAQ | |
203 | tristate "USB PocketPC PDA Driver" | |
204 | depends on USB_SERIAL | |
205 | help | |
206 | Say Y here if you want to connect to your Compaq iPAQ, HP Jornada | |
207 | or any other PDA running Windows CE 3.0 or PocketPC 2002 | |
208 | using a USB cradle/cable. For information on using the driver, | |
209 | read <file:Documentation/usb/usb-serial.txt>. | |
210 | ||
211 | To compile this driver as a module, choose M here: the | |
212 | module will be called ipaq. | |
213 | ||
214 | config USB_SERIAL_IR | |
215 | tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)" | |
216 | depends on USB_SERIAL && EXPERIMENTAL | |
217 | help | |
218 | Say Y here if you want to enable simple serial support for USB IrDA | |
219 | devices. This is useful if you do not want to use the full IrDA | |
220 | stack. | |
221 | ||
222 | To compile this driver as a module, choose M here: the | |
223 | module will be called ir-usb. | |
224 | ||
225 | config USB_SERIAL_EDGEPORT | |
226 | tristate "USB Inside Out Edgeport Serial Driver" | |
227 | depends on USB_SERIAL | |
228 | ---help--- | |
229 | Say Y here if you want to use any of the following devices from | |
230 | Inside Out Networks (Digi): | |
231 | Edgeport/4 | |
232 | Rapidport/4 | |
233 | Edgeport/4t | |
234 | Edgeport/2 | |
235 | Edgeport/4i | |
236 | Edgeport/2i | |
237 | Edgeport/421 | |
238 | Edgeport/21 | |
239 | Edgeport/8 | |
240 | Edgeport/8 Dual | |
241 | Edgeport/2D8 | |
242 | Edgeport/4D8 | |
243 | Edgeport/8i | |
244 | Edgeport/2 DIN | |
245 | Edgeport/4 DIN | |
246 | Edgeport/16 Dual | |
247 | ||
248 | To compile this driver as a module, choose M here: the | |
249 | module will be called io_edgeport. | |
250 | ||
251 | config USB_SERIAL_EDGEPORT_TI | |
252 | tristate "USB Inside Out Edgeport Serial Driver (TI devices)" | |
253 | depends on USB_SERIAL | |
254 | help | |
255 | Say Y here if you want to use any of the devices from Inside Out | |
256 | Networks (Digi) that are not supported by the io_edgeport driver. | |
257 | This includes the Edgeport/1 device. | |
258 | ||
259 | To compile this driver as a module, choose M here: the | |
260 | module will be called io_ti. | |
261 | ||
262 | config USB_SERIAL_GARMIN | |
263 | tristate "USB Garmin GPS driver" | |
264 | depends on USB_SERIAL | |
265 | help | |
266 | Say Y here if you want to connect to your Garmin GPS. | |
267 | Should work with most Garmin GPS devices which have a native USB port. | |
268 | ||
269 | See <http://sourceforge.net/projects/garmin-gps> for the latest | |
270 | version of the driver. | |
271 | ||
272 | To compile this driver as a module, choose M here: the | |
273 | module will be called garmin_gps. | |
274 | ||
275 | config USB_SERIAL_IPW | |
276 | tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)" | |
277 | depends on USB_SERIAL && EXPERIMENTAL | |
278 | help | |
279 | Say Y here if you want to use a IPWireless USB modem such as | |
280 | the ones supplied by Axity3G/Sentech South Africa. | |
281 | ||
282 | To compile this driver as a module, choose M here: the | |
283 | module will be called ipw. | |
284 | ||
285 | config USB_SERIAL_KEYSPAN_PDA | |
286 | tristate "USB Keyspan PDA Single Port Serial Driver" | |
287 | depends on USB_SERIAL | |
288 | help | |
289 | Say Y here if you want to use a Keyspan PDA single port USB to | |
290 | serial converter device. This driver makes use of firmware | |
291 | developed from scratch by Brian Warner. | |
292 | ||
293 | To compile this driver as a module, choose M here: the | |
294 | module will be called keyspan_pda. | |
295 | ||
296 | config USB_SERIAL_KEYSPAN | |
297 | tristate "USB Keyspan USA-xxx Serial Driver" | |
298 | depends on USB_SERIAL | |
299 | ---help--- | |
300 | Say Y here if you want to use Keyspan USB to serial converter | |
301 | devices. This driver makes use of Keyspan's official firmware | |
302 | and was developed with their support. You must also include | |
303 | firmware to support your particular device(s). | |
304 | ||
305 | See <http://misc.nu/hugh/keyspan.html> for more information. | |
306 | ||
307 | To compile this driver as a module, choose M here: the | |
308 | module will be called keyspan. | |
309 | ||
310 | config USB_SERIAL_KEYSPAN_MPR | |
311 | bool "USB Keyspan MPR Firmware" | |
312 | depends on USB_SERIAL_KEYSPAN | |
313 | help | |
314 | Say Y here to include firmware for the Keyspan MPR converter. | |
315 | ||
316 | config USB_SERIAL_KEYSPAN_USA28 | |
317 | bool "USB Keyspan USA-28 Firmware" | |
318 | depends on USB_SERIAL_KEYSPAN | |
319 | help | |
320 | Say Y here to include firmware for the USA-28 converter. | |
321 | ||
322 | config USB_SERIAL_KEYSPAN_USA28X | |
323 | bool "USB Keyspan USA-28X Firmware" | |
324 | depends on USB_SERIAL_KEYSPAN | |
325 | help | |
326 | Say Y here to include firmware for the USA-28X converter. | |
327 | Be sure you have a USA-28X, there are also 28XA and 28XB | |
328 | models, the label underneath has the actual part number. | |
329 | ||
330 | config USB_SERIAL_KEYSPAN_USA28XA | |
331 | bool "USB Keyspan USA-28XA Firmware" | |
332 | depends on USB_SERIAL_KEYSPAN | |
333 | help | |
334 | Say Y here to include firmware for the USA-28XA converter. | |
335 | Be sure you have a USA-28XA, there are also 28X and 28XB | |
336 | models, the label underneath has the actual part number. | |
337 | ||
338 | config USB_SERIAL_KEYSPAN_USA28XB | |
339 | bool "USB Keyspan USA-28XB Firmware" | |
340 | depends on USB_SERIAL_KEYSPAN | |
341 | help | |
342 | Say Y here to include firmware for the USA-28XB converter. | |
343 | Be sure you have a USA-28XB, there are also 28X and 28XA | |
344 | models, the label underneath has the actual part number. | |
345 | ||
346 | config USB_SERIAL_KEYSPAN_USA19 | |
347 | bool "USB Keyspan USA-19 Firmware" | |
348 | depends on USB_SERIAL_KEYSPAN | |
349 | help | |
350 | Say Y here to include firmware for the USA-19 converter. | |
351 | ||
352 | config USB_SERIAL_KEYSPAN_USA18X | |
353 | bool "USB Keyspan USA-18X Firmware" | |
354 | depends on USB_SERIAL_KEYSPAN | |
355 | help | |
356 | Say Y here to include firmware for the USA-18X converter. | |
357 | ||
358 | config USB_SERIAL_KEYSPAN_USA19W | |
359 | bool "USB Keyspan USA-19W Firmware" | |
360 | depends on USB_SERIAL_KEYSPAN | |
361 | help | |
362 | Say Y here to include firmware for the USA-19W converter. | |
363 | ||
364 | config USB_SERIAL_KEYSPAN_USA19QW | |
365 | bool "USB Keyspan USA-19QW Firmware" | |
366 | depends on USB_SERIAL_KEYSPAN | |
367 | help | |
368 | Say Y here to include firmware for the USA-19QW converter. | |
369 | ||
370 | config USB_SERIAL_KEYSPAN_USA19QI | |
371 | bool "USB Keyspan USA-19QI Firmware" | |
372 | depends on USB_SERIAL_KEYSPAN | |
373 | help | |
374 | Say Y here to include firmware for the USA-19QI converter. | |
375 | ||
376 | config USB_SERIAL_KEYSPAN_USA49W | |
377 | bool "USB Keyspan USA-49W Firmware" | |
378 | depends on USB_SERIAL_KEYSPAN | |
379 | help | |
380 | Say Y here to include firmware for the USA-49W converter. | |
381 | ||
382 | config USB_SERIAL_KEYSPAN_USA49WLC | |
383 | bool "USB Keyspan USA-49WLC Firmware" | |
384 | depends on USB_SERIAL_KEYSPAN | |
385 | help | |
386 | Say Y here to include firmware for the USA-49WLC converter. | |
387 | ||
388 | config USB_SERIAL_KLSI | |
389 | tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)" | |
390 | depends on USB_SERIAL && EXPERIMENTAL | |
391 | ---help--- | |
392 | Say Y here if you want to use a KL5KUSB105 - based single port | |
393 | serial adapter. The most widely known -- and currently the only | |
394 | tested -- device in this category is the PalmConnect USB Serial | |
395 | adapter sold by Palm Inc. for use with their Palm III and Palm V | |
396 | series PDAs. | |
397 | ||
398 | Please read <file:Documentation/usb/usb-serial.txt> for more | |
399 | information. | |
400 | ||
401 | To compile this driver as a module, choose M here: the | |
402 | module will be called kl5kusb105. | |
403 | ||
404 | config USB_SERIAL_KOBIL_SCT | |
405 | tristate "USB KOBIL chipcard reader" | |
406 | depends on USB_SERIAL | |
407 | ---help--- | |
408 | Say Y here if you want to use one of the following KOBIL USB chipcard | |
409 | readers: | |
410 | ||
411 | - USB TWIN | |
412 | - KAAN Standard Plus | |
413 | - KAAN SIM | |
414 | - SecOVID Reader Plus | |
415 | - B1 Professional | |
416 | - KAAN Professional | |
417 | ||
418 | Note that you need a current CT-API. | |
419 | To compile this driver as a module, choose M here: the | |
420 | module will be called kobil_sct. | |
421 | ||
422 | config USB_SERIAL_MCT_U232 | |
423 | tristate "USB MCT Single Port Serial Driver" | |
424 | depends on USB_SERIAL | |
425 | ---help--- | |
426 | Say Y here if you want to use a USB Serial single port adapter from | |
427 | Magic Control Technology Corp. (U232 is one of the model numbers). | |
428 | ||
429 | This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB | |
6f065f70 | 430 | BAY, Belkin F5U109, and Belkin F5U409 devices. |
1da177e4 LT |
431 | |
432 | To compile this driver as a module, choose M here: the | |
433 | module will be called mct_u232. | |
434 | ||
0f64478c | 435 | config USB_SERIAL_MOS7720 |
37846539 | 436 | tristate "USB Moschip 7720 Serial Driver" |
0f64478c GKH |
437 | depends on USB_SERIAL |
438 | ---help--- | |
37846539 ON |
439 | Say Y here if you want to use USB Serial single and double |
440 | port adapters from Moschip Semiconductor Tech. | |
0f64478c GKH |
441 | |
442 | To compile this driver as a module, choose M here: the | |
443 | module will be called mos7720. | |
444 | ||
3f542974 PS |
445 | config USB_SERIAL_MOS7840 |
446 | tristate "USB Moschip 7840/7820 USB Serial Driver" | |
447 | depends on USB_SERIAL | |
448 | ---help--- | |
449 | Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 | |
450 | Dual-Serial port device from MosChip Semiconductor. | |
451 | ||
452 | The MCS7840 and MCS7820 have been developed to connect a wide range | |
453 | of standard serial devices to a USB host. The MCS7840 has a USB | |
454 | device controller connected to four (4) individual UARTs while the | |
455 | MCS7820 controller connects to two (2) individual UARTs. | |
456 | ||
457 | To compile this driver as a module, choose M here: the | |
458 | module will be called mos7840. If unsure, choose N. | |
459 | ||
e9a66c64 GKH |
460 | config USB_SERIAL_NAVMAN |
461 | tristate "USB Navman GPS device" | |
462 | depends on USB_SERIAL | |
463 | help | |
464 | To compile this driver as a module, choose M here: the | |
465 | module will be called navman. | |
466 | ||
1da177e4 LT |
467 | config USB_SERIAL_PL2303 |
468 | tristate "USB Prolific 2303 Single Port Serial Driver" | |
469 | depends on USB_SERIAL | |
470 | help | |
471 | Say Y here if you want to use the PL2303 USB Serial single port | |
472 | adapter from Prolific. | |
473 | ||
474 | To compile this driver as a module, choose M here: the | |
475 | module will be called pl2303. | |
476 | ||
49cdee0e KL |
477 | config USB_SERIAL_OTI6858 |
478 | tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller (EXPERIMENTAL)" | |
479 | depends on USB_SERIAL | |
480 | help | |
481 | Say Y here if you want to use the OTi-6858 single port USB to serial | |
482 | converter device. | |
483 | ||
484 | To compile this driver as a module, choose M here: the | |
485 | module will be called oti6858. | |
486 | ||
36045fb7 AH |
487 | config USB_SERIAL_HP4X |
488 | tristate "USB HP4x Calculators support" | |
489 | depends on USB_SERIAL | |
490 | help | |
491 | Say Y here if you want to use an Hewlett-Packard 4x Calculator. | |
492 | ||
493 | To compile this driver as a module, choose M here: the | |
494 | module will be called hp4x. | |
495 | ||
1da177e4 LT |
496 | config USB_SERIAL_SAFE |
497 | tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)" | |
498 | depends on USB_SERIAL && EXPERIMENTAL | |
499 | ||
500 | config USB_SERIAL_SAFE_PADDED | |
501 | bool "USB Secure Encapsulated Driver - Padded" | |
502 | depends on USB_SERIAL_SAFE | |
503 | ||
69de51fd KL |
504 | config USB_SERIAL_SIERRAWIRELESS |
505 | tristate "USB Sierra Wireless Driver" | |
506 | depends on USB_SERIAL | |
507 | help | |
508 | Say M here if you want to use a Sierra Wireless device (if | |
509 | using an PC 5220 or AC580 please use the Airprime driver | |
510 | instead). | |
511 | ||
512 | To compile this driver as a module, choose M here: the | |
513 | module will be called sierra. | |
514 | ||
1da177e4 LT |
515 | config USB_SERIAL_TI |
516 | tristate "USB TI 3410/5052 Serial Driver" | |
517 | depends on USB_SERIAL | |
518 | help | |
519 | Say Y here if you want to use the TI USB 3410 or 5052 | |
520 | serial devices. | |
521 | ||
522 | To compile this driver as a module, choose M here: the | |
523 | module will be called ti_usb_3410_5052. | |
524 | ||
525 | config USB_SERIAL_CYBERJACK | |
526 | tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)" | |
527 | depends on USB_SERIAL && EXPERIMENTAL | |
528 | ---help--- | |
529 | Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard | |
530 | reader. This is an interface to ISO 7816 compatible contactbased | |
531 | chipcards, e.g. GSM SIMs. | |
532 | ||
533 | To compile this driver as a module, choose M here: the | |
534 | module will be called cyberjack. | |
535 | ||
536 | If unsure, say N. | |
537 | ||
538 | config USB_SERIAL_XIRCOM | |
539 | tristate "USB Xircom / Entregra Single Port Serial Driver" | |
540 | depends on USB_SERIAL | |
541 | help | |
542 | Say Y here if you want to use a Xircom or Entregra single port USB to | |
543 | serial converter device. This driver makes use of firmware | |
544 | developed from scratch by Brian Warner. | |
545 | ||
546 | To compile this driver as a module, choose M here: the | |
547 | module will be called keyspan_pda. | |
548 | ||
58cfe911 | 549 | config USB_SERIAL_OPTION |
31fcbb73 | 550 | tristate "USB driver for GSM and CDMA modems" |
14f76cc7 | 551 | depends on USB_SERIAL |
58cfe911 | 552 | help |
31fcbb73 MU |
553 | Say Y here if you have a GSM or CDMA modem that's connected to USB. |
554 | ||
555 | This driver also supports several PCMCIA cards which have a | |
556 | built-in OHCI-USB adapter and an internally-connected GSM modem. | |
557 | The USB bus on these cards is not accessible externally. | |
14f76cc7 | 558 | |
31fcbb73 | 559 | Supported devices include (some of?) those made by: |
033a3fb9 | 560 | Option, Huawei, Audiovox, Novatel Wireless, or Anydata. |
58cfe911 MU |
561 | |
562 | To compile this driver as a module, choose M here: the | |
563 | module will be called option. | |
564 | ||
14f76cc7 MU |
565 | If this driver doesn't recognize your device, |
566 | it might be accessible via the FTDI_SIO driver. | |
567 | ||
1da177e4 LT |
568 | config USB_SERIAL_OMNINET |
569 | tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" | |
570 | depends on USB_SERIAL && EXPERIMENTAL | |
571 | help | |
572 | Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. | |
573 | ||
574 | To compile this driver as a module, choose M here: the | |
575 | module will be called omninet. | |
576 | ||
958e8741 GKH |
577 | config USB_SERIAL_DEBUG |
578 | tristate "USB Debugging Device" | |
579 | depends on USB_SERIAL | |
580 | help | |
3dde6ad8 | 581 | Say Y here if you have a USB debugging device used to receive |
958e8741 GKH |
582 | debugging data from another machine. The most common of these |
583 | devices is the NetChip TurboCONNECT device. | |
584 | ||
585 | To compile this driver as a module, choose M here: the | |
586 | module will be called usb-debug. | |
587 | ||
1da177e4 LT |
588 | config USB_EZUSB |
589 | bool | |
590 | depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT | |
591 | default y | |
592 | ||
3fe70ba2 | 593 | |
1da177e4 LT |
594 | endmenu |
595 |