Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
f30c2269 | 2 | * sound/oss/sscape.c |
1da177e4 LT |
3 | * |
4 | * Low level driver for Ensoniq SoundScape | |
5 | * | |
6 | * | |
7 | * Copyright (C) by Hannu Savolainen 1993-1997 | |
8 | * | |
9 | * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) | |
10 | * Version 2 (June 1991). See the "COPYING" file distributed with this software | |
11 | * for more info. | |
12 | * | |
13 | * | |
14 | * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) | |
15 | * Sergey Smitienko : ensoniq p'n'p support | |
16 | * Christoph Hellwig : adapted to module_init/module_exit | |
17 | * Bartlomiej Zolnierkiewicz : added __init to attach_sscape() | |
18 | * Chris Rankin : Specify that this module owns the coprocessor | |
19 | * Arnaldo C. de Melo : added missing restore_flags in sscape_pnp_upload_file | |
20 | */ | |
21 | ||
22 | #include <linux/init.h> | |
23 | #include <linux/module.h> | |
24 | ||
25 | #include "sound_config.h" | |
26 | #include "sound_firmware.h" | |
27 | ||
28 | #include <linux/types.h> | |
29 | #include <linux/errno.h> | |
30 | #include <linux/signal.h> | |
31 | #include <linux/fcntl.h> | |
32 | #include <linux/ctype.h> | |
33 | #include <linux/stddef.h> | |
34 | #include <linux/kmod.h> | |
35 | #include <asm/dma.h> | |
36 | #include <asm/io.h> | |
37 | #include <linux/wait.h> | |
38 | #include <linux/slab.h> | |
39 | #include <linux/ioport.h> | |
40 | #include <linux/delay.h> | |
41 | #include <linux/proc_fs.h> | |
f23f6e08 | 42 | #include <linux/mm.h> |
1da177e4 LT |
43 | #include <linux/spinlock.h> |
44 | ||
45 | #include "coproc.h" | |
46 | ||
47 | #include "ad1848.h" | |
48 | #include "mpu401.h" | |
49 | ||
50 | /* | |
51 | * I/O ports | |
52 | */ | |
53 | #define MIDI_DATA 0 | |
54 | #define MIDI_CTRL 1 | |
55 | #define HOST_CTRL 2 | |
56 | #define TX_READY 0x02 | |
57 | #define RX_READY 0x01 | |
58 | #define HOST_DATA 3 | |
59 | #define ODIE_ADDR 4 | |
60 | #define ODIE_DATA 5 | |
61 | ||
62 | /* | |
63 | * Indirect registers | |
64 | */ | |
65 | ||
66 | #define GA_INTSTAT_REG 0 | |
67 | #define GA_INTENA_REG 1 | |
68 | #define GA_DMAA_REG 2 | |
69 | #define GA_DMAB_REG 3 | |
70 | #define GA_INTCFG_REG 4 | |
71 | #define GA_DMACFG_REG 5 | |
72 | #define GA_CDCFG_REG 6 | |
73 | #define GA_SMCFGA_REG 7 | |
74 | #define GA_SMCFGB_REG 8 | |
75 | #define GA_HMCTL_REG 9 | |
76 | ||
77 | /* | |
78 | * DMA channel identifiers (A and B) | |
79 | */ | |
80 | ||
81 | #define SSCAPE_DMA_A 0 | |
82 | #define SSCAPE_DMA_B 1 | |
83 | ||
84 | #define PORT(name) (devc->base+name) | |
85 | ||
86 | /* | |
87 | * Host commands recognized by the OBP microcode | |
88 | */ | |
89 | ||
90 | #define CMD_GEN_HOST_ACK 0x80 | |
91 | #define CMD_GEN_MPU_ACK 0x81 | |
92 | #define CMD_GET_BOARD_TYPE 0x82 | |
93 | #define CMD_SET_CONTROL 0x88 /* Old firmware only */ | |
94 | #define CMD_GET_CONTROL 0x89 /* Old firmware only */ | |
95 | #define CTL_MASTER_VOL 0 | |
96 | #define CTL_MIC_MODE 2 | |
97 | #define CTL_SYNTH_VOL 4 | |
98 | #define CTL_WAVE_VOL 7 | |
99 | #define CMD_SET_EXTMIDI 0x8a | |
100 | #define CMD_GET_EXTMIDI 0x8b | |
101 | #define CMD_SET_MT32 0x8c | |
102 | #define CMD_GET_MT32 0x8d | |
103 | ||
104 | #define CMD_ACK 0x80 | |
105 | ||
106 | #define IC_ODIE 1 | |
107 | #define IC_OPUS 2 | |
108 | ||
109 | typedef struct sscape_info | |
110 | { | |
111 | int base, irq, dma; | |
112 | ||
113 | int codec, codec_irq; /* required to setup pnp cards*/ | |
114 | int codec_type; | |
115 | int ic_type; | |
116 | char* raw_buf; | |
117 | unsigned long raw_buf_phys; | |
118 | int buffsize; /* -------------------------- */ | |
119 | spinlock_t lock; | |
120 | int ok; /* Properly detected */ | |
121 | int failed; | |
122 | int dma_allocated; | |
123 | int codec_audiodev; | |
124 | int opened; | |
125 | int *osp; | |
126 | int my_audiodev; | |
127 | } sscape_info; | |
128 | ||
129 | static struct sscape_info adev_info = { | |
130 | 0 | |
131 | }; | |
132 | ||
133 | static struct sscape_info *devc = &adev_info; | |
134 | static int sscape_mididev = -1; | |
135 | ||
136 | /* Some older cards have assigned interrupt bits differently than new ones */ | |
137 | static char valid_interrupts_old[] = { | |
138 | 9, 7, 5, 15 | |
139 | }; | |
140 | ||
141 | static char valid_interrupts_new[] = { | |
142 | 9, 5, 7, 10 | |
143 | }; | |
144 | ||
145 | static char *valid_interrupts = valid_interrupts_new; | |
146 | ||
147 | /* | |
148 | * See the bottom of the driver. This can be set by spea =0/1. | |
149 | */ | |
150 | ||
151 | #ifdef REVEAL_SPEA | |
152 | static char old_hardware = 1; | |
153 | #else | |
154 | static char old_hardware; | |
155 | #endif | |
156 | ||
157 | static void sleep(unsigned howlong) | |
158 | { | |
159 | current->state = TASK_INTERRUPTIBLE; | |
160 | schedule_timeout(howlong); | |
161 | } | |
162 | ||
163 | static unsigned char sscape_read(struct sscape_info *devc, int reg) | |
164 | { | |
165 | unsigned long flags; | |
166 | unsigned char val; | |
167 | ||
168 | spin_lock_irqsave(&devc->lock,flags); | |
169 | outb(reg, PORT(ODIE_ADDR)); | |
170 | val = inb(PORT(ODIE_DATA)); | |
171 | spin_unlock_irqrestore(&devc->lock,flags); | |
172 | return val; | |
173 | } | |
174 | ||
175 | static void __sscape_write(int reg, int data) | |
176 | { | |
177 | outb(reg, PORT(ODIE_ADDR)); | |
178 | outb(data, PORT(ODIE_DATA)); | |
179 | } | |
180 | ||
181 | static void sscape_write(struct sscape_info *devc, int reg, int data) | |
182 | { | |
183 | unsigned long flags; | |
184 | ||
185 | spin_lock_irqsave(&devc->lock,flags); | |
186 | __sscape_write(reg, data); | |
187 | spin_unlock_irqrestore(&devc->lock,flags); | |
188 | } | |
189 | ||
190 | static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg) | |
191 | { | |
192 | unsigned char res; | |
193 | unsigned long flags; | |
194 | ||
195 | spin_lock_irqsave(&devc->lock,flags); | |
196 | outb( reg, devc -> codec); | |
197 | res = inb (devc -> codec + 1); | |
198 | spin_unlock_irqrestore(&devc->lock,flags); | |
199 | return res; | |
200 | ||
201 | } | |
202 | ||
203 | static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data) | |
204 | { | |
205 | unsigned long flags; | |
206 | ||
207 | spin_lock_irqsave(&devc->lock,flags); | |
208 | outb( reg, devc -> codec); | |
209 | outb( data, devc -> codec + 1); | |
210 | spin_unlock_irqrestore(&devc->lock,flags); | |
211 | } | |
212 | ||
213 | static void host_open(struct sscape_info *devc) | |
214 | { | |
215 | outb((0x00), PORT(HOST_CTRL)); /* Put the board to the host mode */ | |
216 | } | |
217 | ||
218 | static void host_close(struct sscape_info *devc) | |
219 | { | |
220 | outb((0x03), PORT(HOST_CTRL)); /* Put the board to the MIDI mode */ | |
221 | } | |
222 | ||
223 | static int host_write(struct sscape_info *devc, unsigned char *data, int count) | |
224 | { | |
225 | unsigned long flags; | |
226 | int i, timeout_val; | |
227 | ||
228 | spin_lock_irqsave(&devc->lock,flags); | |
229 | /* | |
230 | * Send the command and data bytes | |
231 | */ | |
232 | ||
233 | for (i = 0; i < count; i++) | |
234 | { | |
235 | for (timeout_val = 10000; timeout_val > 0; timeout_val--) | |
236 | if (inb(PORT(HOST_CTRL)) & TX_READY) | |
237 | break; | |
238 | ||
239 | if (timeout_val <= 0) | |
240 | { | |
241 | spin_unlock_irqrestore(&devc->lock,flags); | |
242 | return 0; | |
243 | } | |
244 | outb(data[i], PORT(HOST_DATA)); | |
245 | } | |
246 | spin_unlock_irqrestore(&devc->lock,flags); | |
247 | return 1; | |
248 | } | |
249 | ||
250 | static int host_read(struct sscape_info *devc) | |
251 | { | |
252 | unsigned long flags; | |
253 | int timeout_val; | |
254 | unsigned char data; | |
255 | ||
256 | spin_lock_irqsave(&devc->lock,flags); | |
257 | /* | |
258 | * Read a byte | |
259 | */ | |
260 | ||
261 | for (timeout_val = 10000; timeout_val > 0; timeout_val--) | |
262 | if (inb(PORT(HOST_CTRL)) & RX_READY) | |
263 | break; | |
264 | ||
265 | if (timeout_val <= 0) | |
266 | { | |
267 | spin_unlock_irqrestore(&devc->lock,flags); | |
268 | return -1; | |
269 | } | |
270 | data = inb(PORT(HOST_DATA)); | |
271 | spin_unlock_irqrestore(&devc->lock,flags); | |
272 | return data; | |
273 | } | |
274 | ||
275 | #if 0 /* unused */ | |
276 | static int host_command1(struct sscape_info *devc, int cmd) | |
277 | { | |
278 | unsigned char buf[10]; | |
279 | buf[0] = (unsigned char) (cmd & 0xff); | |
280 | return host_write(devc, buf, 1); | |
281 | } | |
282 | #endif /* unused */ | |
283 | ||
284 | ||
285 | static int host_command2(struct sscape_info *devc, int cmd, int parm1) | |
286 | { | |
287 | unsigned char buf[10]; | |
288 | ||
289 | buf[0] = (unsigned char) (cmd & 0xff); | |
290 | buf[1] = (unsigned char) (parm1 & 0xff); | |
291 | ||
292 | return host_write(devc, buf, 2); | |
293 | } | |
294 | ||
295 | static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2) | |
296 | { | |
297 | unsigned char buf[10]; | |
298 | ||
299 | buf[0] = (unsigned char) (cmd & 0xff); | |
300 | buf[1] = (unsigned char) (parm1 & 0xff); | |
301 | buf[2] = (unsigned char) (parm2 & 0xff); | |
302 | return host_write(devc, buf, 3); | |
303 | } | |
304 | ||
305 | static void set_mt32(struct sscape_info *devc, int value) | |
306 | { | |
307 | host_open(devc); | |
308 | host_command2(devc, CMD_SET_MT32, value ? 1 : 0); | |
309 | if (host_read(devc) != CMD_ACK) | |
310 | { | |
311 | /* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */ | |
312 | } | |
313 | host_close(devc); | |
314 | } | |
315 | ||
316 | static void set_control(struct sscape_info *devc, int ctrl, int value) | |
317 | { | |
318 | host_open(devc); | |
319 | host_command3(devc, CMD_SET_CONTROL, ctrl, value); | |
320 | if (host_read(devc) != CMD_ACK) | |
321 | { | |
322 | /* printk( "SNDSCAPE: Setting control (%d) failed\n", ctrl); */ | |
323 | } | |
324 | host_close(devc); | |
325 | } | |
326 | ||
327 | static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode) | |
328 | { | |
329 | unsigned char temp; | |
330 | ||
331 | if (dma_chan != SSCAPE_DMA_A) | |
332 | { | |
333 | printk(KERN_WARNING "soundscape: Tried to use DMA channel != A. Why?\n"); | |
334 | return; | |
335 | } | |
336 | audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE; | |
337 | DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode); | |
338 | audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE; | |
339 | ||
340 | temp = devc->dma << 4; /* Setup DMA channel select bits */ | |
341 | if (devc->dma <= 3) | |
342 | temp |= 0x80; /* 8 bit DMA channel */ | |
343 | ||
344 | temp |= 1; /* Trigger DMA */ | |
345 | sscape_write(devc, GA_DMAA_REG, temp); | |
346 | temp &= 0xfe; /* Clear DMA trigger */ | |
347 | sscape_write(devc, GA_DMAA_REG, temp); | |
348 | } | |
349 | ||
350 | static int verify_mpu(struct sscape_info *devc) | |
351 | { | |
352 | /* | |
353 | * The SoundScape board could be in three modes (MPU, 8250 and host). | |
354 | * If the card is not in the MPU mode, enabling the MPU driver will | |
355 | * cause infinite loop (the driver believes that there is always some | |
356 | * received data in the buffer. | |
357 | * | |
358 | * Detect this by looking if there are more than 10 received MIDI bytes | |
359 | * (0x00) in the buffer. | |
360 | */ | |
361 | ||
362 | int i; | |
363 | ||
364 | for (i = 0; i < 10; i++) | |
365 | { | |
366 | if (inb(devc->base + HOST_CTRL) & 0x80) | |
367 | return 1; | |
368 | ||
369 | if (inb(devc->base) != 0x00) | |
370 | return 1; | |
371 | } | |
372 | printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n"); | |
373 | return 0; | |
374 | } | |
375 | ||
376 | static int sscape_coproc_open(void *dev_info, int sub_device) | |
377 | { | |
378 | if (sub_device == COPR_MIDI) | |
379 | { | |
380 | set_mt32(devc, 0); | |
381 | if (!verify_mpu(devc)) | |
382 | return -EIO; | |
383 | } | |
384 | return 0; | |
385 | } | |
386 | ||
387 | static void sscape_coproc_close(void *dev_info, int sub_device) | |
388 | { | |
389 | struct sscape_info *devc = dev_info; | |
390 | unsigned long flags; | |
391 | ||
392 | spin_lock_irqsave(&devc->lock,flags); | |
393 | if (devc->dma_allocated) | |
394 | { | |
395 | __sscape_write(GA_DMAA_REG, 0x20); /* DMA channel disabled */ | |
396 | devc->dma_allocated = 0; | |
397 | } | |
398 | spin_unlock_irqrestore(&devc->lock,flags); | |
399 | return; | |
400 | } | |
401 | ||
402 | static void sscape_coproc_reset(void *dev_info) | |
403 | { | |
404 | } | |
405 | ||
406 | static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag) | |
407 | { | |
408 | unsigned long flags; | |
409 | unsigned char temp; | |
410 | volatile int done, timeout_val; | |
411 | static unsigned char codec_dma_bits; | |
412 | ||
413 | if (flag & CPF_FIRST) | |
414 | { | |
415 | /* | |
416 | * First block. Have to allocate DMA and to reset the board | |
417 | * before continuing. | |
418 | */ | |
419 | ||
420 | spin_lock_irqsave(&devc->lock,flags); | |
421 | codec_dma_bits = sscape_read(devc, GA_CDCFG_REG); | |
422 | ||
423 | if (devc->dma_allocated == 0) | |
424 | devc->dma_allocated = 1; | |
425 | ||
426 | spin_unlock_irqrestore(&devc->lock,flags); | |
427 | ||
428 | sscape_write(devc, GA_HMCTL_REG, | |
429 | (temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f); /*Reset */ | |
430 | ||
431 | for (timeout_val = 10000; timeout_val > 0; timeout_val--) | |
432 | sscape_read(devc, GA_HMCTL_REG); /* Delay */ | |
433 | ||
434 | /* Take board out of reset */ | |
435 | sscape_write(devc, GA_HMCTL_REG, | |
436 | (temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80); | |
437 | } | |
438 | /* | |
439 | * Transfer one code block using DMA | |
440 | */ | |
441 | if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL) | |
442 | { | |
443 | printk(KERN_WARNING "soundscape: DMA buffer not available\n"); | |
444 | return 0; | |
445 | } | |
446 | memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size); | |
447 | ||
448 | spin_lock_irqsave(&devc->lock,flags); | |
449 | ||
450 | /******** INTERRUPTS DISABLED NOW ********/ | |
451 | ||
452 | do_dma(devc, SSCAPE_DMA_A, | |
453 | audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys, | |
454 | size, DMA_MODE_WRITE); | |
455 | ||
456 | /* | |
457 | * Wait until transfer completes. | |
458 | */ | |
459 | ||
460 | done = 0; | |
461 | timeout_val = 30; | |
462 | while (!done && timeout_val-- > 0) | |
463 | { | |
464 | int resid; | |
465 | ||
466 | if (HZ / 50) | |
467 | sleep(HZ / 50); | |
468 | clear_dma_ff(devc->dma); | |
469 | if ((resid = get_dma_residue(devc->dma)) == 0) | |
470 | done = 1; | |
471 | } | |
472 | ||
473 | spin_unlock_irqrestore(&devc->lock,flags); | |
474 | if (!done) | |
475 | return 0; | |
476 | ||
477 | if (flag & CPF_LAST) | |
478 | { | |
479 | /* | |
480 | * Take the board out of reset | |
481 | */ | |
482 | outb((0x00), PORT(HOST_CTRL)); | |
483 | outb((0x00), PORT(MIDI_CTRL)); | |
484 | ||
485 | temp = sscape_read(devc, GA_HMCTL_REG); | |
486 | temp |= 0x40; | |
487 | sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */ | |
488 | ||
489 | /* | |
490 | * Wait until the ODB wakes up | |
491 | */ | |
492 | spin_lock_irqsave(&devc->lock,flags); | |
493 | done = 0; | |
494 | timeout_val = 5 * HZ; | |
495 | while (!done && timeout_val-- > 0) | |
496 | { | |
497 | unsigned char x; | |
498 | ||
499 | sleep(1); | |
500 | x = inb(PORT(HOST_DATA)); | |
501 | if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ | |
502 | { | |
503 | DDB(printk("Soundscape: Acknowledge = %x\n", x)); | |
504 | done = 1; | |
505 | } | |
506 | } | |
507 | sscape_write(devc, GA_CDCFG_REG, codec_dma_bits); | |
508 | ||
509 | spin_unlock_irqrestore(&devc->lock,flags); | |
510 | if (!done) | |
511 | { | |
512 | printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n"); | |
513 | return 0; | |
514 | } | |
515 | spin_lock_irqsave(&devc->lock,flags); | |
516 | done = 0; | |
517 | timeout_val = 5 * HZ; | |
518 | while (!done && timeout_val-- > 0) | |
519 | { | |
520 | sleep(1); | |
521 | if (inb(PORT(HOST_DATA)) == 0xfe) /* Host startup acknowledge */ | |
522 | done = 1; | |
523 | } | |
524 | spin_unlock_irqrestore(&devc->lock,flags); | |
525 | if (!done) | |
526 | { | |
527 | printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); | |
528 | return 0; | |
529 | } | |
530 | printk(KERN_INFO "SoundScape board initialized OK\n"); | |
531 | set_control(devc, CTL_MASTER_VOL, 100); | |
532 | set_control(devc, CTL_SYNTH_VOL, 100); | |
533 | ||
534 | #ifdef SSCAPE_DEBUG3 | |
535 | /* | |
536 | * Temporary debugging aid. Print contents of the registers after | |
537 | * downloading the code. | |
538 | */ | |
539 | { | |
540 | int i; | |
541 | ||
542 | for (i = 0; i < 13; i++) | |
543 | printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); | |
544 | } | |
545 | #endif | |
546 | ||
547 | } | |
548 | return 1; | |
549 | } | |
550 | ||
551 | static int download_boot_block(void *dev_info, copr_buffer * buf) | |
552 | { | |
553 | if (buf->len <= 0 || buf->len > sizeof(buf->data)) | |
554 | return -EINVAL; | |
555 | ||
556 | if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags)) | |
557 | { | |
558 | printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n"); | |
559 | return -EIO; | |
560 | } | |
561 | return 0; | |
562 | } | |
563 | ||
564 | static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local) | |
565 | { | |
566 | copr_buffer *buf; | |
567 | int err; | |
568 | ||
569 | switch (cmd) | |
570 | { | |
571 | case SNDCTL_COPR_RESET: | |
572 | sscape_coproc_reset(dev_info); | |
573 | return 0; | |
574 | ||
575 | case SNDCTL_COPR_LOAD: | |
576 | buf = (copr_buffer *) vmalloc(sizeof(copr_buffer)); | |
577 | if (buf == NULL) | |
578 | return -ENOSPC; | |
579 | if (copy_from_user(buf, arg, sizeof(copr_buffer))) | |
580 | { | |
581 | vfree(buf); | |
582 | return -EFAULT; | |
583 | } | |
584 | err = download_boot_block(dev_info, buf); | |
585 | vfree(buf); | |
586 | return err; | |
587 | ||
588 | default: | |
589 | return -EINVAL; | |
590 | } | |
591 | } | |
592 | ||
593 | static coproc_operations sscape_coproc_operations = | |
594 | { | |
595 | "SoundScape M68K", | |
596 | THIS_MODULE, | |
597 | sscape_coproc_open, | |
598 | sscape_coproc_close, | |
599 | sscape_coproc_ioctl, | |
600 | sscape_coproc_reset, | |
601 | &adev_info | |
602 | }; | |
603 | ||
604 | static struct resource *sscape_ports; | |
605 | static int sscape_is_pnp; | |
606 | ||
607 | static void __init attach_sscape(struct address_info *hw_config) | |
608 | { | |
609 | #ifndef SSCAPE_REGS | |
610 | /* | |
611 | * Config register values for Spea/V7 Media FX and Ensoniq S-2000. | |
612 | * These values are card | |
613 | * dependent. If you have another SoundScape based card, you have to | |
614 | * find the correct values. Do the following: | |
615 | * - Compile this driver with SSCAPE_DEBUG1 defined. | |
616 | * - Shut down and power off your machine. | |
617 | * - Boot with DOS so that the SSINIT.EXE program is run. | |
618 | * - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed | |
619 | * when detecting the SoundScape. | |
620 | * - Modify the following list to use the values printed during boot. | |
621 | * Undefine the SSCAPE_DEBUG1 | |
622 | */ | |
623 | #define SSCAPE_REGS { \ | |
624 | /* I0 */ 0x00, \ | |
625 | /* I1 */ 0xf0, /* Note! Ignored. Set always to 0xf0 */ \ | |
626 | /* I2 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ | |
627 | /* I3 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ | |
628 | /* I4 */ 0xf5, /* Ignored */ \ | |
629 | /* I5 */ 0x10, \ | |
630 | /* I6 */ 0x00, \ | |
631 | /* I7 */ 0x2e, /* I7 MEM config A. Likely to vary between models */ \ | |
632 | /* I8 */ 0x00, /* I8 MEM config B. Likely to vary between models */ \ | |
633 | /* I9 */ 0x40 /* Ignored */ \ | |
634 | } | |
635 | #endif | |
636 | ||
637 | unsigned long flags; | |
638 | static unsigned char regs[10] = SSCAPE_REGS; | |
639 | ||
640 | int i, irq_bits = 0xff; | |
641 | ||
642 | if (old_hardware) | |
643 | { | |
644 | valid_interrupts = valid_interrupts_old; | |
645 | conf_printf("Ensoniq SoundScape (old)", hw_config); | |
646 | } | |
647 | else | |
648 | conf_printf("Ensoniq SoundScape", hw_config); | |
649 | ||
650 | for (i = 0; i < 4; i++) | |
651 | { | |
652 | if (hw_config->irq == valid_interrupts[i]) | |
653 | { | |
654 | irq_bits = i; | |
655 | break; | |
656 | } | |
657 | } | |
658 | if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff)) | |
659 | { | |
660 | printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq); | |
661 | release_region(devc->base, 2); | |
662 | release_region(devc->base + 2, 6); | |
663 | if (sscape_is_pnp) | |
664 | release_region(devc->codec, 2); | |
665 | return; | |
666 | } | |
667 | ||
668 | if (!sscape_is_pnp) { | |
669 | ||
670 | spin_lock_irqsave(&devc->lock,flags); | |
671 | /* Host interrupt enable */ | |
672 | sscape_write(devc, 1, 0xf0); /* All interrupts enabled */ | |
673 | /* DMA A status/trigger register */ | |
674 | sscape_write(devc, 2, 0x20); /* DMA channel disabled */ | |
675 | /* DMA B status/trigger register */ | |
676 | sscape_write(devc, 3, 0x20); /* DMA channel disabled */ | |
677 | /* Host interrupt config reg */ | |
678 | sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits); | |
679 | /* Don't destroy CD-ROM DMA config bits (0xc0) */ | |
680 | sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0)); | |
681 | /* CD-ROM config (WSS codec actually) */ | |
682 | sscape_write(devc, 6, regs[6]); | |
683 | sscape_write(devc, 7, regs[7]); | |
684 | sscape_write(devc, 8, regs[8]); | |
685 | /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */ | |
686 | sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08); | |
687 | spin_unlock_irqrestore(&devc->lock,flags); | |
688 | } | |
689 | #ifdef SSCAPE_DEBUG2 | |
690 | /* | |
691 | * Temporary debugging aid. Print contents of the registers after | |
692 | * changing them. | |
693 | */ | |
694 | { | |
695 | int i; | |
696 | ||
697 | for (i = 0; i < 13; i++) | |
698 | printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); | |
699 | } | |
700 | #endif | |
701 | ||
702 | if (probe_mpu401(hw_config, sscape_ports)) | |
703 | hw_config->always_detect = 1; | |
704 | hw_config->name = "SoundScape"; | |
705 | ||
706 | hw_config->irq *= -1; /* Negative value signals IRQ sharing */ | |
707 | attach_mpu401(hw_config, THIS_MODULE); | |
708 | hw_config->irq *= -1; /* Restore it */ | |
709 | ||
710 | if (hw_config->slots[1] != -1) /* The MPU driver installed itself */ | |
711 | { | |
712 | sscape_mididev = hw_config->slots[1]; | |
713 | midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations; | |
714 | } | |
715 | sscape_write(devc, GA_INTENA_REG, 0x80); /* Master IRQ enable */ | |
716 | devc->ok = 1; | |
717 | devc->failed = 0; | |
718 | } | |
719 | ||
720 | static int detect_ga(sscape_info * devc) | |
721 | { | |
722 | unsigned char save; | |
723 | ||
724 | DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base)); | |
725 | ||
726 | /* | |
727 | * First check that the address register of "ODIE" is | |
728 | * there and that it has exactly 4 writable bits. | |
729 | * First 4 bits | |
730 | */ | |
731 | ||
732 | if ((save = inb(PORT(ODIE_ADDR))) & 0xf0) | |
733 | { | |
734 | DDB(printk("soundscape: Detect error A\n")); | |
735 | return 0; | |
736 | } | |
737 | outb((0x00), PORT(ODIE_ADDR)); | |
738 | if (inb(PORT(ODIE_ADDR)) != 0x00) | |
739 | { | |
740 | DDB(printk("soundscape: Detect error B\n")); | |
741 | return 0; | |
742 | } | |
743 | outb((0xff), PORT(ODIE_ADDR)); | |
744 | if (inb(PORT(ODIE_ADDR)) != 0x0f) | |
745 | { | |
746 | DDB(printk("soundscape: Detect error C\n")); | |
747 | return 0; | |
748 | } | |
749 | outb((save), PORT(ODIE_ADDR)); | |
750 | ||
751 | /* | |
752 | * Now verify that some indirect registers return zero on some bits. | |
753 | * This may break the driver with some future revisions of "ODIE" but... | |
754 | */ | |
755 | ||
756 | if (sscape_read(devc, 0) & 0x0c) | |
757 | { | |
758 | DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0))); | |
759 | return 0; | |
760 | } | |
761 | if (sscape_read(devc, 1) & 0x0f) | |
762 | { | |
763 | DDB(printk("soundscape: Detect error E\n")); | |
764 | return 0; | |
765 | } | |
766 | if (sscape_read(devc, 5) & 0x0f) | |
767 | { | |
768 | DDB(printk("soundscape: Detect error F\n")); | |
769 | return 0; | |
770 | } | |
771 | return 1; | |
772 | } | |
773 | ||
774 | static int sscape_read_host_ctrl(sscape_info* devc) | |
775 | { | |
776 | return host_read(devc); | |
777 | } | |
778 | ||
779 | static void sscape_write_host_ctrl2(sscape_info *devc, int a, int b) | |
780 | { | |
781 | host_command2(devc, a, b); | |
782 | } | |
783 | ||
784 | static int sscape_alloc_dma(sscape_info *devc) | |
785 | { | |
786 | char *start_addr, *end_addr; | |
787 | int dma_pagesize; | |
788 | int sz, size; | |
789 | struct page *page; | |
790 | ||
791 | if (devc->raw_buf != NULL) return 0; /* Already done */ | |
792 | dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024); | |
793 | devc->raw_buf = NULL; | |
794 | devc->buffsize = 8192*4; | |
795 | if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize; | |
796 | start_addr = NULL; | |
797 | /* | |
798 | * Now loop until we get a free buffer. Try to get smaller buffer if | |
799 | * it fails. Don't accept smaller than 8k buffer for performance | |
800 | * reasons. | |
801 | */ | |
802 | while (start_addr == NULL && devc->buffsize > PAGE_SIZE) { | |
803 | for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); | |
804 | devc->buffsize = PAGE_SIZE * (1 << sz); | |
805 | start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz); | |
806 | if (start_addr == NULL) devc->buffsize /= 2; | |
807 | } | |
808 | ||
809 | if (start_addr == NULL) { | |
810 | printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n"); | |
811 | return 0; | |
812 | } else { | |
813 | /* make some checks */ | |
814 | end_addr = start_addr + devc->buffsize - 1; | |
815 | /* now check if it fits into the same dma-pagesize */ | |
816 | ||
817 | if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1)) | |
818 | || end_addr >= (char *) (MAX_DMA_ADDRESS)) { | |
819 | printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize); | |
820 | return 0; | |
821 | } | |
822 | } | |
823 | devc->raw_buf = start_addr; | |
824 | devc->raw_buf_phys = virt_to_bus(start_addr); | |
825 | ||
826 | for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) | |
827 | SetPageReserved(page); | |
828 | return 1; | |
829 | } | |
830 | ||
831 | static void sscape_free_dma(sscape_info *devc) | |
832 | { | |
833 | int sz, size; | |
834 | unsigned long start_addr, end_addr; | |
835 | struct page *page; | |
836 | ||
837 | if (devc->raw_buf == NULL) return; | |
838 | for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); | |
839 | start_addr = (unsigned long) devc->raw_buf; | |
840 | end_addr = start_addr + devc->buffsize; | |
841 | ||
842 | for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) | |
843 | ClearPageReserved(page); | |
844 | ||
845 | free_pages((unsigned long) devc->raw_buf, sz); | |
846 | devc->raw_buf = NULL; | |
847 | } | |
848 | ||
849 | /* Intel version !!!!!!!!! */ | |
850 | ||
851 | static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode) | |
852 | { | |
853 | unsigned long flags; | |
854 | ||
855 | flags = claim_dma_lock(); | |
856 | disable_dma(chan); | |
857 | clear_dma_ff(chan); | |
858 | set_dma_mode(chan, dma_mode); | |
859 | set_dma_addr(chan, physaddr); | |
860 | set_dma_count(chan, count); | |
861 | enable_dma(chan); | |
862 | release_dma_lock(flags); | |
863 | return 0; | |
864 | } | |
865 | ||
866 | static void sscape_pnp_start_dma(sscape_info* devc, int arg ) | |
867 | { | |
868 | int reg; | |
869 | if (arg == 0) reg = 2; | |
870 | else reg = 3; | |
871 | ||
872 | sscape_write(devc, reg, sscape_read( devc, reg) | 0x01); | |
873 | sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE); | |
874 | } | |
875 | ||
876 | static int sscape_pnp_wait_dma (sscape_info* devc, int arg ) | |
877 | { | |
878 | int reg; | |
879 | unsigned long i; | |
880 | unsigned char d; | |
881 | ||
882 | if (arg == 0) reg = 2; | |
883 | else reg = 3; | |
884 | ||
885 | sleep ( 1 ); | |
886 | i = 0; | |
887 | do { | |
888 | d = sscape_read(devc, reg) & 1; | |
889 | if ( d == 1) break; | |
890 | i++; | |
891 | } while (i < 500000); | |
892 | d = sscape_read(devc, reg) & 1; | |
893 | return d; | |
894 | } | |
895 | ||
896 | static int sscape_pnp_alloc_dma(sscape_info* devc) | |
897 | { | |
898 | /* printk(KERN_INFO "sscape: requesting dma\n"); */ | |
899 | if (request_dma(devc -> dma, "sscape")) return 0; | |
900 | /* printk(KERN_INFO "sscape: dma channel allocated\n"); */ | |
901 | if (!sscape_alloc_dma(devc)) { | |
902 | free_dma(devc -> dma); | |
903 | return 0; | |
904 | }; | |
905 | return 1; | |
906 | } | |
907 | ||
908 | static void sscape_pnp_free_dma(sscape_info* devc) | |
909 | { | |
910 | sscape_free_dma( devc); | |
911 | free_dma(devc -> dma ); | |
912 | /* printk(KERN_INFO "sscape: dma released\n"); */ | |
913 | } | |
914 | ||
915 | static int sscape_pnp_upload_file(sscape_info* devc, char* fn) | |
916 | { | |
917 | int done = 0; | |
918 | int timeout_val; | |
919 | char* data,*dt; | |
920 | int len,l; | |
921 | unsigned long flags; | |
922 | ||
923 | sscape_write( devc, 9, sscape_read(devc, 9 ) & 0x3F ); | |
924 | sscape_write( devc, 2, (devc -> dma << 4) | 0x80 ); | |
925 | sscape_write( devc, 3, 0x20 ); | |
926 | sscape_write( devc, 9, sscape_read( devc, 9 ) | 0x80 ); | |
927 | ||
928 | len = mod_firmware_load(fn, &data); | |
929 | if (len == 0) { | |
930 | printk(KERN_ERR "sscape: file not found: %s\n", fn); | |
931 | return 0; | |
932 | } | |
933 | dt = data; | |
934 | spin_lock_irqsave(&devc->lock,flags); | |
935 | while ( len > 0 ) { | |
936 | if (len > devc -> buffsize) l = devc->buffsize; | |
937 | else l = len; | |
938 | len -= l; | |
939 | memcpy(devc->raw_buf, dt, l); dt += l; | |
940 | sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48); | |
941 | sscape_pnp_start_dma ( devc, 0 ); | |
942 | if (sscape_pnp_wait_dma ( devc, 0 ) == 0) { | |
943 | spin_unlock_irqrestore(&devc->lock,flags); | |
944 | return 0; | |
945 | } | |
946 | } | |
947 | ||
948 | spin_unlock_irqrestore(&devc->lock,flags); | |
949 | vfree(data); | |
950 | ||
951 | outb(0, devc -> base + 2); | |
952 | outb(0, devc -> base); | |
953 | ||
954 | sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40); | |
955 | ||
956 | timeout_val = 5 * HZ; | |
957 | while (!done && timeout_val-- > 0) | |
958 | { | |
959 | unsigned char x; | |
960 | sleep(1); | |
961 | x = inb( devc -> base + 3); | |
962 | if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ | |
963 | { | |
964 | //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); | |
965 | done = 1; | |
966 | } | |
967 | } | |
968 | timeout_val = 5 * HZ; | |
969 | done = 0; | |
970 | while (!done && timeout_val-- > 0) | |
971 | { | |
972 | unsigned char x; | |
973 | sleep(1); | |
974 | x = inb( devc -> base + 3); | |
975 | if (x == 0xfe) /* OBP startup acknowledge */ | |
976 | { | |
977 | //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); | |
978 | done = 1; | |
979 | } | |
980 | } | |
981 | ||
982 | if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); | |
983 | ||
984 | sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); | |
985 | sscape_write( devc, 3, (devc -> dma << 4) + 0x80); | |
986 | return 1; | |
987 | } | |
988 | ||
989 | static void __init sscape_pnp_init_hw(sscape_info* devc) | |
990 | { | |
991 | unsigned char midi_irq = 0, sb_irq = 0; | |
992 | unsigned i; | |
993 | static char code_file_name[23] = "/sndscape/sndscape.cox"; | |
994 | ||
1da177e4 LT |
995 | int sscape_joystic_enable = 0x7f; |
996 | int sscape_mic_enable = 0; | |
997 | int sscape_ext_midi = 0; | |
998 | ||
999 | if ( !sscape_pnp_alloc_dma(devc) ) { | |
1000 | printk(KERN_ERR "sscape: faild to allocate dma\n"); | |
1001 | return; | |
1002 | } | |
1003 | ||
1004 | for (i = 0; i < 4; i++) { | |
1005 | if ( devc -> irq == valid_interrupts[i] ) | |
1006 | midi_irq = i; | |
1007 | if ( devc -> codec_irq == valid_interrupts[i] ) | |
1008 | sb_irq = i; | |
1009 | } | |
1010 | ||
1011 | sscape_write( devc, 5, 0x50); | |
1012 | sscape_write( devc, 7, 0x2e); | |
1013 | sscape_write( devc, 8, 0x00); | |
1014 | ||
1015 | sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); | |
1016 | sscape_write( devc, 3, ( devc -> dma << 4) | 0x80); | |
1017 | ||
f25ad2d3 | 1018 | sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq); |
1da177e4 LT |
1019 | |
1020 | i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0); | |
1da177e4 LT |
1021 | if (sscape_joystic_enable) i |= 8; |
1022 | ||
1023 | sscape_write (devc, 9, i); | |
1024 | sscape_write (devc, 6, 0x80); | |
1025 | sscape_write (devc, 1, 0x80); | |
1026 | ||
1027 | if (devc -> codec_type == 2) { | |
1028 | sscape_pnp_write_codec( devc, 0x0C, 0x50); | |
1029 | sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F); | |
1030 | sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0); | |
1031 | sscape_pnp_write_codec( devc, 29, 0x20); | |
1032 | } | |
1033 | ||
1034 | if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) { | |
1035 | printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n"); | |
1036 | sscape_pnp_free_dma(devc); | |
1037 | return; | |
1038 | } | |
1039 | ||
1040 | i = sscape_read_host_ctrl( devc ); | |
1041 | ||
1042 | if ( (i & 0x0F) > 7 ) { | |
1043 | printk(KERN_ERR "sscape: scope.cod faild\n"); | |
1044 | sscape_pnp_free_dma(devc); | |
1045 | return; | |
1046 | } | |
1047 | if ( i & 0x10 ) sscape_write( devc, 7, 0x2F); | |
1048 | code_file_name[21] = (char) ( i & 0x0F) + 0x30; | |
1049 | if (sscape_pnp_upload_file( devc, code_file_name) == 0) { | |
1050 | printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name); | |
1051 | sscape_pnp_free_dma(devc); | |
1052 | return; | |
1053 | } | |
1054 | ||
1055 | if (devc->ic_type != IC_ODIE) { | |
1056 | sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) | | |
1057 | ( sscape_mic_enable == 0 ? 0x00 : 0x80) ); | |
1058 | } | |
1059 | sscape_write_host_ctrl2( devc, 0x84, 0x64 ); /* MIDI volume */ | |
1060 | sscape_write_host_ctrl2( devc, 0x86, 0x64 ); /* MIDI volume?? */ | |
1061 | sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi); | |
1062 | ||
1063 | sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL | |
1064 | sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL | |
1065 | sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL | |
1066 | sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR | |
1067 | ||
1068 | if (devc -> codec_type == 1) { | |
1069 | sscape_pnp_write_codec ( devc, 4, 0x1F ); | |
1070 | sscape_pnp_write_codec ( devc, 5, 0x1F ); | |
1071 | sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable); | |
1072 | } else { | |
1073 | int t; | |
1074 | sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1); | |
1075 | sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1)); | |
1076 | ||
1077 | t = sscape_pnp_read_codec( devc, 0x00) & 0xDF; | |
1078 | if ( (sscape_mic_enable == 0)) t |= 0; | |
1079 | else t |= 0x20; | |
1080 | sscape_pnp_write_codec ( devc, 0x00, t); | |
1081 | t = sscape_pnp_read_codec( devc, 0x01) & 0xDF; | |
1082 | if ( (sscape_mic_enable == 0) ) t |= 0; | |
1083 | else t |= 0x20; | |
1084 | sscape_pnp_write_codec ( devc, 0x01, t); | |
1085 | sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20); | |
1086 | outb(0, devc -> codec); | |
1087 | } | |
1088 | if (devc -> ic_type == IC_OPUS ) { | |
1089 | int i = sscape_read( devc, 9 ); | |
1090 | sscape_write( devc, 9, i | 3 ); | |
1091 | sscape_write( devc, 3, 0x40); | |
1092 | ||
1093 | if (request_region(0x228, 1, "sscape setup junk")) { | |
1094 | outb(0, 0x228); | |
1095 | release_region(0x228,1); | |
1096 | } | |
1097 | sscape_write( devc, 3, (devc -> dma << 4) | 0x80); | |
1098 | sscape_write( devc, 9, i ); | |
1099 | } | |
1100 | ||
1101 | host_close ( devc ); | |
1102 | sscape_pnp_free_dma(devc); | |
1103 | } | |
1104 | ||
1105 | static int __init detect_sscape_pnp(sscape_info* devc) | |
1106 | { | |
1107 | long i, irq_bits = 0xff; | |
1108 | unsigned int d; | |
1109 | ||
1110 | DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base)); | |
1111 | ||
1112 | if (!request_region(devc->codec, 2, "sscape codec")) { | |
1113 | printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec); | |
1114 | return 0; | |
1115 | } | |
1116 | ||
1117 | if ((inb(devc->base + 2) & 0x78) != 0) | |
1118 | goto fail; | |
1119 | ||
1120 | d = inb ( devc -> base + 4) & 0xF0; | |
1121 | if (d & 0x80) | |
1122 | goto fail; | |
1123 | ||
1124 | if (d == 0) { | |
1125 | devc->codec_type = 1; | |
1126 | devc->ic_type = IC_ODIE; | |
1127 | } else if ( (d & 0x60) != 0) { | |
1128 | devc->codec_type = 2; | |
1129 | devc->ic_type = IC_OPUS; | |
1130 | } else if ( (d & 0x40) != 0) { /* WTF? */ | |
1131 | devc->codec_type = 2; | |
1132 | devc->ic_type = IC_ODIE; | |
1133 | } else | |
1134 | goto fail; | |
1135 | ||
1136 | sscape_is_pnp = 1; | |
1137 | ||
1138 | outb(0xFA, devc -> base+4); | |
1139 | if ((inb( devc -> base+4) & 0x9F) != 0x0A) | |
1140 | goto fail; | |
1141 | outb(0xFE, devc -> base+4); | |
1142 | if ( (inb(devc -> base+4) & 0x9F) != 0x0E) | |
1143 | goto fail; | |
1144 | if ( (inb(devc -> base+5) & 0x9F) != 0x0E) | |
1145 | goto fail; | |
1146 | ||
1147 | if (devc->codec_type == 2) { | |
1148 | if (devc->codec != devc->base + 8) { | |
1149 | printk("soundscape warning: incorrect codec port specified\n"); | |
1150 | goto fail; | |
1151 | } | |
1152 | d = 0x10 | (sscape_read(devc, 9) & 0xCF); | |
1153 | sscape_write(devc, 9, d); | |
1154 | sscape_write(devc, 6, 0x80); | |
1155 | } else { | |
1156 | //todo: check codec is not base + 8 | |
1157 | } | |
1158 | ||
1159 | d = (sscape_read(devc, 9) & 0x3F) | 0xC0; | |
1160 | sscape_write(devc, 9, d); | |
1161 | ||
1162 | for (i = 0; i < 550000; i++) | |
1163 | if ( !(inb(devc -> codec) & 0x80) ) break; | |
1164 | ||
1165 | d = inb(devc -> codec); | |
1166 | if (d & 0x80) | |
1167 | goto fail; | |
1168 | if ( inb(devc -> codec + 2) == 0xFF) | |
1169 | goto fail; | |
1170 | ||
1171 | sscape_write(devc, 9, sscape_read(devc, 9) & 0x3F ); | |
1172 | ||
1173 | d = inb(devc -> codec) & 0x80; | |
1174 | if ( d == 0) { | |
1175 | printk(KERN_INFO "soundscape: hardware detected\n"); | |
1176 | valid_interrupts = valid_interrupts_new; | |
1177 | } else { | |
1178 | printk(KERN_INFO "soundscape: board looks like media fx\n"); | |
1179 | valid_interrupts = valid_interrupts_old; | |
1180 | old_hardware = 1; | |
1181 | } | |
1182 | ||
1183 | sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9) & 0x3F) ); | |
1184 | ||
1185 | for (i = 0; i < 550000; i++) | |
1186 | if ( !(inb(devc -> codec) & 0x80)) | |
1187 | break; | |
1188 | ||
1189 | sscape_pnp_init_hw(devc); | |
1190 | ||
1191 | for (i = 0; i < 4; i++) | |
1192 | { | |
1193 | if (devc->codec_irq == valid_interrupts[i]) { | |
1194 | irq_bits = i; | |
1195 | break; | |
1196 | } | |
1197 | } | |
1198 | sscape_write(devc, GA_INTENA_REG, 0x00); | |
1199 | sscape_write(devc, GA_DMACFG_REG, 0x50); | |
1200 | sscape_write(devc, GA_DMAA_REG, 0x70); | |
1201 | sscape_write(devc, GA_DMAB_REG, 0x20); | |
1202 | sscape_write(devc, GA_INTCFG_REG, 0xf0); | |
1203 | sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1)); | |
1204 | ||
1205 | sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20); | |
1206 | sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20); | |
1207 | ||
1208 | return 1; | |
1209 | fail: | |
1210 | release_region(devc->codec, 2); | |
1211 | return 0; | |
1212 | } | |
1213 | ||
1214 | static int __init probe_sscape(struct address_info *hw_config) | |
1215 | { | |
1216 | devc->base = hw_config->io_base; | |
1217 | devc->irq = hw_config->irq; | |
1218 | devc->dma = hw_config->dma; | |
1219 | devc->osp = hw_config->osp; | |
1220 | ||
1221 | #ifdef SSCAPE_DEBUG1 | |
1222 | /* | |
1223 | * Temporary debugging aid. Print contents of the registers before | |
1224 | * changing them. | |
1225 | */ | |
1226 | { | |
1227 | int i; | |
1228 | ||
1229 | for (i = 0; i < 13; i++) | |
1230 | printk("I%d = %02x (old value)\n", i, sscape_read(devc, i)); | |
1231 | } | |
1232 | #endif | |
1233 | devc->failed = 1; | |
1234 | ||
1235 | sscape_ports = request_region(devc->base, 2, "mpu401"); | |
1236 | if (!sscape_ports) | |
1237 | return 0; | |
1238 | ||
1239 | if (!request_region(devc->base + 2, 6, "SoundScape")) { | |
1240 | release_region(devc->base, 2); | |
1241 | return 0; | |
1242 | } | |
1243 | ||
1244 | if (!detect_ga(devc)) { | |
1245 | if (detect_sscape_pnp(devc)) | |
1246 | return 1; | |
1247 | release_region(devc->base, 2); | |
1248 | release_region(devc->base + 2, 6); | |
1249 | return 0; | |
1250 | } | |
1251 | ||
1252 | if (old_hardware) /* Check that it's really an old Spea/Reveal card. */ | |
1253 | { | |
1254 | unsigned char tmp; | |
1255 | int cc; | |
1256 | ||
1257 | if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0)) | |
1258 | { | |
1259 | sscape_write(devc, GA_HMCTL_REG, tmp | 0x80); | |
1260 | for (cc = 0; cc < 200000; ++cc) | |
1261 | inb(devc->base + ODIE_ADDR); | |
1262 | } | |
1263 | } | |
1264 | return 1; | |
1265 | } | |
1266 | ||
1267 | static int __init init_ss_ms_sound(struct address_info *hw_config) | |
1268 | { | |
1269 | int i, irq_bits = 0xff; | |
1270 | int ad_flags = 0; | |
1271 | struct resource *ports; | |
1272 | ||
1273 | if (devc->failed) | |
1274 | { | |
1275 | printk(KERN_ERR "soundscape: Card not detected\n"); | |
1276 | return 0; | |
1277 | } | |
1278 | if (devc->ok == 0) | |
1279 | { | |
1280 | printk(KERN_ERR "soundscape: Invalid initialization order.\n"); | |
1281 | return 0; | |
1282 | } | |
1283 | for (i = 0; i < 4; i++) | |
1284 | { | |
1285 | if (hw_config->irq == valid_interrupts[i]) | |
1286 | { | |
1287 | irq_bits = i; | |
1288 | break; | |
1289 | } | |
1290 | } | |
1291 | if (irq_bits == 0xff) { | |
1292 | printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq); | |
1293 | return 0; | |
1294 | } | |
1295 | ||
1296 | if (old_hardware) | |
1297 | ad_flags = 0x12345677; /* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */ | |
1298 | else if (sscape_is_pnp) | |
1299 | ad_flags = 0x87654321; /* Tell that we have a soundscape pnp with 1845 chip */ | |
1300 | ||
1301 | ports = request_region(hw_config->io_base, 4, "ad1848"); | |
1302 | if (!ports) { | |
1303 | printk(KERN_ERR "soundscape: ports busy\n"); | |
1304 | return 0; | |
1305 | } | |
1306 | ||
1307 | if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) { | |
1308 | release_region(hw_config->io_base, 4); | |
1309 | return 0; | |
1310 | } | |
1311 | ||
1312 | if (!sscape_is_pnp) /*pnp is already setup*/ | |
1313 | { | |
1314 | /* | |
1315 | * Setup the DMA polarity. | |
1316 | */ | |
1317 | sscape_write(devc, GA_DMACFG_REG, 0x50); | |
1318 | ||
1319 | /* | |
1320 | * Take the gate-array off of the DMA channel. | |
1321 | */ | |
1322 | sscape_write(devc, GA_DMAB_REG, 0x20); | |
1323 | ||
1324 | /* | |
1325 | * Init the AD1848 (CD-ROM) config reg. | |
1326 | */ | |
1327 | sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1)); | |
1328 | } | |
1329 | ||
1330 | if (hw_config->irq == devc->irq) | |
1331 | printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n"); | |
1332 | ||
1333 | hw_config->slots[0] = ad1848_init( | |
1334 | sscape_is_pnp ? "SoundScape" : "SoundScape PNP", | |
1335 | ports, | |
1336 | hw_config->irq, | |
1337 | hw_config->dma, | |
1338 | hw_config->dma, | |
1339 | 0, | |
1340 | devc->osp, | |
1341 | THIS_MODULE); | |
1342 | ||
1343 | ||
1344 | if (hw_config->slots[0] != -1) /* The AD1848 driver installed itself */ | |
1345 | { | |
1346 | audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations; | |
1347 | devc->codec_audiodev = hw_config->slots[0]; | |
1348 | devc->my_audiodev = hw_config->slots[0]; | |
1349 | ||
1350 | /* Set proper routings here (what are they) */ | |
1351 | AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); | |
1352 | } | |
1353 | ||
1354 | #ifdef SSCAPE_DEBUG5 | |
1355 | /* | |
1356 | * Temporary debugging aid. Print contents of the registers | |
1357 | * after the AD1848 device has been initialized. | |
1358 | */ | |
1359 | { | |
1360 | int i; | |
1361 | ||
1362 | for (i = 0; i < 13; i++) | |
1363 | printk("I%d = %02x\n", i, sscape_read(devc, i)); | |
1364 | } | |
1365 | #endif | |
1366 | return 1; | |
1367 | } | |
1368 | ||
1369 | static void __exit unload_sscape(struct address_info *hw_config) | |
1370 | { | |
1371 | release_region(devc->base + 2, 6); | |
1372 | unload_mpu401(hw_config); | |
1373 | if (sscape_is_pnp) | |
1374 | release_region(devc->codec, 2); | |
1375 | } | |
1376 | ||
1377 | static void __exit unload_ss_ms_sound(struct address_info *hw_config) | |
1378 | { | |
1379 | ad1848_unload(hw_config->io_base, | |
1380 | hw_config->irq, | |
1381 | devc->dma, | |
1382 | devc->dma, | |
1383 | 0); | |
1384 | sound_unload_audiodev(hw_config->slots[0]); | |
1385 | } | |
1386 | ||
1387 | static struct address_info cfg; | |
1388 | static struct address_info cfg_mpu; | |
1389 | ||
1390 | static int __initdata spea = -1; | |
1391 | static int mss = 0; | |
1392 | static int __initdata dma = -1; | |
1393 | static int __initdata irq = -1; | |
1394 | static int __initdata io = -1; | |
1395 | static int __initdata mpu_irq = -1; | |
1396 | static int __initdata mpu_io = -1; | |
1397 | ||
1398 | module_param(dma, int, 0); | |
1399 | module_param(irq, int, 0); | |
1400 | module_param(io, int, 0); | |
1401 | module_param(spea, int, 0); /* spea=0/1 set the old_hardware */ | |
1402 | module_param(mpu_irq, int, 0); | |
1403 | module_param(mpu_io, int, 0); | |
1404 | module_param(mss, int, 0); | |
1405 | ||
1406 | static int __init init_sscape(void) | |
1407 | { | |
1408 | printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n"); | |
1409 | ||
1410 | cfg.irq = irq; | |
1411 | cfg.dma = dma; | |
1412 | cfg.io_base = io; | |
1413 | ||
1414 | cfg_mpu.irq = mpu_irq; | |
1415 | cfg_mpu.io_base = mpu_io; | |
1416 | /* WEH - Try to get right dma channel */ | |
1417 | cfg_mpu.dma = dma; | |
1418 | ||
1419 | devc->codec = cfg.io_base; | |
1420 | devc->codec_irq = cfg.irq; | |
1421 | devc->codec_type = 0; | |
1422 | devc->ic_type = 0; | |
1423 | devc->raw_buf = NULL; | |
1424 | spin_lock_init(&devc->lock); | |
1425 | ||
1426 | if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) { | |
1427 | printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n"); | |
1428 | return -EINVAL; | |
1429 | } | |
1430 | ||
1431 | if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) { | |
1432 | printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n"); | |
1433 | return -EINVAL; | |
1434 | } | |
1435 | ||
1436 | if(spea != -1) { | |
1437 | old_hardware = spea; | |
1438 | printk(KERN_INFO "Forcing %s hardware support.\n", | |
1439 | spea?"new":"old"); | |
1440 | } | |
1441 | if (probe_sscape(&cfg_mpu) == 0) | |
1442 | return -ENODEV; | |
1443 | ||
1444 | attach_sscape(&cfg_mpu); | |
1445 | ||
1446 | mss = init_ss_ms_sound(&cfg); | |
1447 | ||
1448 | return 0; | |
1449 | } | |
1450 | ||
1451 | static void __exit cleanup_sscape(void) | |
1452 | { | |
1453 | if (mss) | |
1454 | unload_ss_ms_sound(&cfg); | |
1455 | unload_sscape(&cfg_mpu); | |
1456 | } | |
1457 | ||
1458 | module_init(init_sscape); | |
1459 | module_exit(cleanup_sscape); | |
1460 | ||
1461 | #ifndef MODULE | |
1462 | static int __init setup_sscape(char *str) | |
1463 | { | |
1464 | /* io, irq, dma, mpu_io, mpu_irq */ | |
1465 | int ints[6]; | |
1466 | ||
1467 | str = get_options(str, ARRAY_SIZE(ints), ints); | |
1468 | ||
1469 | io = ints[1]; | |
1470 | irq = ints[2]; | |
1471 | dma = ints[3]; | |
1472 | mpu_io = ints[4]; | |
1473 | mpu_irq = ints[5]; | |
1474 | ||
1475 | return 1; | |
1476 | } | |
1477 | ||
1478 | __setup("sscape=", setup_sscape); | |
1479 | #endif | |
1480 | MODULE_LICENSE("GPL"); |