Commit | Line | Data |
---|---|---|
619a6f1d GKH |
1 | /* |
2 | * spcp8x5 USB to serial adaptor driver | |
3 | * | |
4 | * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) | |
5 | * Copyright (C) 2006 S1 Corp. | |
6 | * | |
7 | * Original driver for 2.6.10 pl2303 driver by | |
8 | * Greg Kroah-Hartman (greg@kroah.com) | |
9 | * Changes for 2.6.20 by Harald Klein <hari@vt100.at> | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
13 | * the Free Software Foundation; either version 2 of the License, or | |
14 | * (at your option) any later version. | |
15 | * | |
16 | * | |
17 | */ | |
18 | #include <linux/kernel.h> | |
19 | #include <linux/errno.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/slab.h> | |
22 | #include <linux/tty.h> | |
23 | #include <linux/tty_driver.h> | |
24 | #include <linux/tty_flip.h> | |
25 | #include <linux/module.h> | |
26 | #include <linux/spinlock.h> | |
27 | #include <linux/usb.h> | |
28 | #include <linux/usb/serial.h> | |
29 | ||
30 | ||
31 | /* Version Information */ | |
32 | #define DRIVER_VERSION "v0.04" | |
33 | #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" | |
34 | ||
35 | static int debug; | |
36 | ||
37 | #define SPCP8x5_007_VID 0x04FC | |
38 | #define SPCP8x5_007_PID 0x0201 | |
39 | #define SPCP8x5_008_VID 0x04fc | |
40 | #define SPCP8x5_008_PID 0x0235 | |
41 | #define SPCP8x5_PHILIPS_VID 0x0471 | |
42 | #define SPCP8x5_PHILIPS_PID 0x081e | |
43 | #define SPCP8x5_INTERMATIC_VID 0x04FC | |
44 | #define SPCP8x5_INTERMATIC_PID 0x0204 | |
45 | #define SPCP8x5_835_VID 0x04fc | |
46 | #define SPCP8x5_835_PID 0x0231 | |
47 | ||
48 | static struct usb_device_id id_table [] = { | |
49 | { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, | |
50 | { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, | |
51 | { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, | |
52 | { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, | |
53 | { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)}, | |
54 | { } /* Terminating entry */ | |
55 | }; | |
56 | MODULE_DEVICE_TABLE(usb, id_table); | |
57 | ||
58 | struct spcp8x5_usb_ctrl_arg { | |
59 | u8 type; | |
60 | u8 cmd; | |
61 | u8 cmd_type; | |
62 | u16 value; | |
63 | u16 index; | |
64 | u16 length; | |
65 | }; | |
66 | ||
67 | /* wait 30s before close */ | |
68 | #define SPCP8x5_CLOSING_WAIT (30*HZ) | |
69 | ||
70 | #define SPCP8x5_BUF_SIZE 1024 | |
71 | ||
72 | ||
73 | /* spcp8x5 spec register define */ | |
74 | #define MCR_CONTROL_LINE_RTS 0x02 | |
75 | #define MCR_CONTROL_LINE_DTR 0x01 | |
76 | #define MCR_DTR 0x01 | |
77 | #define MCR_RTS 0x02 | |
78 | ||
79 | #define MSR_STATUS_LINE_DCD 0x80 | |
80 | #define MSR_STATUS_LINE_RI 0x40 | |
81 | #define MSR_STATUS_LINE_DSR 0x20 | |
82 | #define MSR_STATUS_LINE_CTS 0x10 | |
83 | ||
84 | /* verdor command here , we should define myself */ | |
85 | #define SET_DEFAULT 0x40 | |
86 | #define SET_DEFAULT_TYPE 0x20 | |
87 | ||
88 | #define SET_UART_FORMAT 0x40 | |
89 | #define SET_UART_FORMAT_TYPE 0x21 | |
90 | #define SET_UART_FORMAT_SIZE_5 0x00 | |
91 | #define SET_UART_FORMAT_SIZE_6 0x01 | |
92 | #define SET_UART_FORMAT_SIZE_7 0x02 | |
93 | #define SET_UART_FORMAT_SIZE_8 0x03 | |
94 | #define SET_UART_FORMAT_STOP_1 0x00 | |
95 | #define SET_UART_FORMAT_STOP_2 0x04 | |
96 | #define SET_UART_FORMAT_PAR_NONE 0x00 | |
97 | #define SET_UART_FORMAT_PAR_ODD 0x10 | |
98 | #define SET_UART_FORMAT_PAR_EVEN 0x30 | |
99 | #define SET_UART_FORMAT_PAR_MASK 0xD0 | |
100 | #define SET_UART_FORMAT_PAR_SPACE 0x90 | |
101 | ||
102 | #define GET_UART_STATUS_TYPE 0xc0 | |
103 | #define GET_UART_STATUS 0x22 | |
104 | #define GET_UART_STATUS_MSR 0x06 | |
105 | ||
106 | #define SET_UART_STATUS 0x40 | |
107 | #define SET_UART_STATUS_TYPE 0x23 | |
108 | #define SET_UART_STATUS_MCR 0x0004 | |
109 | #define SET_UART_STATUS_MCR_DTR 0x01 | |
110 | #define SET_UART_STATUS_MCR_RTS 0x02 | |
111 | #define SET_UART_STATUS_MCR_LOOP 0x10 | |
112 | ||
113 | #define SET_WORKING_MODE 0x40 | |
114 | #define SET_WORKING_MODE_TYPE 0x24 | |
115 | #define SET_WORKING_MODE_U2C 0x00 | |
116 | #define SET_WORKING_MODE_RS485 0x01 | |
117 | #define SET_WORKING_MODE_PDMA 0x02 | |
118 | #define SET_WORKING_MODE_SPP 0x03 | |
119 | ||
120 | #define SET_FLOWCTL_CHAR 0x40 | |
121 | #define SET_FLOWCTL_CHAR_TYPE 0x25 | |
122 | ||
123 | #define GET_VERSION 0xc0 | |
124 | #define GET_VERSION_TYPE 0x26 | |
125 | ||
126 | #define SET_REGISTER 0x40 | |
127 | #define SET_REGISTER_TYPE 0x27 | |
128 | ||
129 | #define GET_REGISTER 0xc0 | |
130 | #define GET_REGISTER_TYPE 0x28 | |
131 | ||
132 | #define SET_RAM 0x40 | |
133 | #define SET_RAM_TYPE 0x31 | |
134 | ||
135 | #define GET_RAM 0xc0 | |
136 | #define GET_RAM_TYPE 0x32 | |
137 | ||
138 | /* how come ??? */ | |
139 | #define UART_STATE 0x08 | |
140 | #define UART_STATE_TRANSIENT_MASK 0x74 | |
141 | #define UART_DCD 0x01 | |
142 | #define UART_DSR 0x02 | |
143 | #define UART_BREAK_ERROR 0x04 | |
144 | #define UART_RING 0x08 | |
145 | #define UART_FRAME_ERROR 0x10 | |
146 | #define UART_PARITY_ERROR 0x20 | |
147 | #define UART_OVERRUN_ERROR 0x40 | |
148 | #define UART_CTS 0x80 | |
149 | ||
150 | enum spcp8x5_type { | |
151 | SPCP825_007_TYPE, | |
152 | SPCP825_008_TYPE, | |
153 | SPCP825_PHILIP_TYPE, | |
154 | SPCP825_INTERMATIC_TYPE, | |
155 | SPCP835_TYPE, | |
156 | }; | |
157 | ||
158 | /* 1st in 1st out buffer 4 driver */ | |
159 | struct ringbuf { | |
160 | unsigned int buf_size; | |
161 | char *buf_buf; | |
162 | char *buf_get; | |
163 | char *buf_put; | |
164 | }; | |
165 | ||
166 | /* alloc the ring buf and alloc the buffer itself */ | |
167 | static inline struct ringbuf *alloc_ringbuf(unsigned int size) | |
168 | { | |
169 | struct ringbuf *pb; | |
170 | ||
171 | if (size == 0) | |
172 | return NULL; | |
173 | ||
174 | pb = kmalloc(sizeof(*pb), GFP_KERNEL); | |
175 | if (pb == NULL) | |
176 | return NULL; | |
177 | ||
178 | pb->buf_buf = kmalloc(size, GFP_KERNEL); | |
179 | if (pb->buf_buf == NULL) { | |
180 | kfree(pb); | |
181 | return NULL; | |
182 | } | |
183 | ||
184 | pb->buf_size = size; | |
185 | pb->buf_get = pb->buf_put = pb->buf_buf; | |
186 | ||
187 | return pb; | |
188 | } | |
189 | ||
190 | /* free the ring buf and the buffer itself */ | |
191 | static inline void free_ringbuf(struct ringbuf *pb) | |
192 | { | |
193 | if (pb != NULL) { | |
194 | kfree(pb->buf_buf); | |
195 | kfree(pb); | |
196 | } | |
197 | } | |
198 | ||
199 | /* clear pipo , juest repoint the pointer here */ | |
200 | static inline void clear_ringbuf(struct ringbuf *pb) | |
201 | { | |
202 | if (pb != NULL) | |
203 | pb->buf_get = pb->buf_put; | |
204 | } | |
205 | ||
206 | /* get the number of data in the pipo */ | |
207 | static inline unsigned int ringbuf_avail_data(struct ringbuf *pb) | |
208 | { | |
209 | if (pb == NULL) | |
210 | return 0; | |
0487b583 | 211 | return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size; |
619a6f1d GKH |
212 | } |
213 | ||
214 | /* get the number of space in the pipo */ | |
215 | static inline unsigned int ringbuf_avail_space(struct ringbuf *pb) | |
216 | { | |
217 | if (pb == NULL) | |
218 | return 0; | |
0487b583 | 219 | return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size; |
619a6f1d GKH |
220 | } |
221 | ||
222 | /* put count data into pipo */ | |
223 | static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf, | |
224 | unsigned int count) | |
225 | { | |
226 | unsigned int len; | |
227 | ||
228 | if (pb == NULL) | |
229 | return 0; | |
230 | ||
231 | len = ringbuf_avail_space(pb); | |
232 | if (count > len) | |
233 | count = len; | |
234 | ||
235 | if (count == 0) | |
236 | return 0; | |
237 | ||
238 | len = pb->buf_buf + pb->buf_size - pb->buf_put; | |
239 | if (count > len) { | |
240 | memcpy(pb->buf_put, buf, len); | |
241 | memcpy(pb->buf_buf, buf+len, count - len); | |
242 | pb->buf_put = pb->buf_buf + count - len; | |
243 | } else { | |
244 | memcpy(pb->buf_put, buf, count); | |
245 | if (count < len) | |
246 | pb->buf_put += count; | |
247 | else /* count == len */ | |
248 | pb->buf_put = pb->buf_buf; | |
249 | } | |
250 | return count; | |
251 | } | |
252 | ||
253 | /* get count data from pipo */ | |
254 | static unsigned int get_ringbuf(struct ringbuf *pb, char *buf, | |
255 | unsigned int count) | |
256 | { | |
257 | unsigned int len; | |
258 | ||
259 | if (pb == NULL || buf == NULL) | |
260 | return 0; | |
261 | ||
262 | len = ringbuf_avail_data(pb); | |
263 | if (count > len) | |
264 | count = len; | |
265 | ||
266 | if (count == 0) | |
267 | return 0; | |
268 | ||
269 | len = pb->buf_buf + pb->buf_size - pb->buf_get; | |
270 | if (count > len) { | |
271 | memcpy(buf, pb->buf_get, len); | |
272 | memcpy(buf+len, pb->buf_buf, count - len); | |
273 | pb->buf_get = pb->buf_buf + count - len; | |
274 | } else { | |
275 | memcpy(buf, pb->buf_get, count); | |
276 | if (count < len) | |
277 | pb->buf_get += count; | |
278 | else /* count == len */ | |
279 | pb->buf_get = pb->buf_buf; | |
280 | } | |
281 | ||
282 | return count; | |
283 | } | |
284 | ||
285 | static struct usb_driver spcp8x5_driver = { | |
286 | .name = "spcp8x5", | |
287 | .probe = usb_serial_probe, | |
288 | .disconnect = usb_serial_disconnect, | |
289 | .id_table = id_table, | |
290 | .no_dynamic_id = 1, | |
291 | }; | |
292 | ||
293 | ||
294 | struct spcp8x5_private { | |
295 | spinlock_t lock; | |
296 | struct ringbuf *buf; | |
297 | int write_urb_in_use; | |
298 | enum spcp8x5_type type; | |
299 | wait_queue_head_t delta_msr_wait; | |
300 | u8 line_control; | |
301 | u8 line_status; | |
302 | u8 termios_initialized; | |
303 | }; | |
304 | ||
305 | /* desc : when device plug in,this function would be called. | |
306 | * thanks to usb_serial subsystem,then do almost every things for us. And what | |
307 | * we should do just alloc the buffer */ | |
308 | static int spcp8x5_startup(struct usb_serial *serial) | |
309 | { | |
310 | struct spcp8x5_private *priv; | |
311 | int i; | |
312 | enum spcp8x5_type type = SPCP825_007_TYPE; | |
fd05e720 | 313 | u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); |
619a6f1d | 314 | |
fd05e720 | 315 | if (product == 0x0201) |
619a6f1d | 316 | type = SPCP825_007_TYPE; |
fd05e720 | 317 | else if (product == 0x0231) |
619a6f1d | 318 | type = SPCP835_TYPE; |
fd05e720 | 319 | else if (product == 0x0235) |
619a6f1d | 320 | type = SPCP825_008_TYPE; |
fd05e720 | 321 | else if (product == 0x0204) |
619a6f1d | 322 | type = SPCP825_INTERMATIC_TYPE; |
fd05e720 AV |
323 | else if (product == 0x0471 && |
324 | serial->dev->descriptor.idVendor == cpu_to_le16(0x081e)) | |
619a6f1d GKH |
325 | type = SPCP825_PHILIP_TYPE; |
326 | dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); | |
327 | ||
328 | for (i = 0; i < serial->num_ports; ++i) { | |
329 | priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL); | |
330 | if (!priv) | |
331 | goto cleanup; | |
332 | ||
333 | spin_lock_init(&priv->lock); | |
334 | priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE); | |
335 | if (priv->buf == NULL) | |
336 | goto cleanup2; | |
337 | ||
338 | init_waitqueue_head(&priv->delta_msr_wait); | |
339 | priv->type = type; | |
340 | usb_set_serial_port_data(serial->port[i] , priv); | |
341 | ||
342 | } | |
343 | ||
344 | return 0; | |
345 | ||
346 | cleanup2: | |
347 | kfree(priv); | |
348 | cleanup: | |
349 | for (--i; i >= 0; --i) { | |
350 | priv = usb_get_serial_port_data(serial->port[i]); | |
351 | free_ringbuf(priv->buf); | |
352 | kfree(priv); | |
353 | usb_set_serial_port_data(serial->port[i] , NULL); | |
354 | } | |
355 | return -ENOMEM; | |
356 | } | |
357 | ||
358 | /* call when the device plug out. free all the memory alloced by probe */ | |
359 | static void spcp8x5_shutdown(struct usb_serial *serial) | |
360 | { | |
361 | int i; | |
362 | struct spcp8x5_private *priv; | |
363 | ||
364 | for (i = 0; i < serial->num_ports; i++) { | |
365 | priv = usb_get_serial_port_data(serial->port[i]); | |
366 | if (priv) { | |
367 | free_ringbuf(priv->buf); | |
368 | kfree(priv); | |
369 | usb_set_serial_port_data(serial->port[i] , NULL); | |
370 | } | |
371 | } | |
372 | } | |
373 | ||
374 | /* set the modem control line of the device. | |
375 | * NOTE spcp825-007 not supported this */ | |
376 | static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value, | |
377 | enum spcp8x5_type type) | |
378 | { | |
379 | int retval; | |
380 | u8 mcr = 0 ; | |
381 | ||
382 | if (type == SPCP825_007_TYPE) | |
383 | return -EPERM; | |
384 | ||
385 | mcr = (unsigned short)value; | |
386 | retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
387 | SET_UART_STATUS_TYPE, SET_UART_STATUS, | |
388 | mcr, 0x04, NULL, 0, 100); | |
389 | if (retval != 0) | |
390 | dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval); | |
391 | return retval; | |
392 | } | |
393 | ||
394 | /* get the modem status register of the device | |
395 | * NOTE spcp825-007 not supported this */ | |
396 | static int spcp8x5_get_msr(struct usb_device *dev, u8 *status, | |
397 | enum spcp8x5_type type) | |
398 | { | |
399 | u8 *status_buffer; | |
400 | int ret; | |
401 | ||
402 | /* I return Permited not support here but seem inval device | |
403 | * is more fix */ | |
404 | if (type == SPCP825_007_TYPE) | |
405 | return -EPERM; | |
406 | if (status == NULL) | |
407 | return -EINVAL; | |
408 | ||
409 | status_buffer = kmalloc(1, GFP_KERNEL); | |
410 | if (!status_buffer) | |
411 | return -ENOMEM; | |
412 | status_buffer[0] = status[0]; | |
413 | ||
414 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
415 | GET_UART_STATUS, GET_UART_STATUS_TYPE, | |
416 | 0, GET_UART_STATUS_MSR, status_buffer, 1, 100); | |
417 | if (ret < 0) | |
418 | dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)", | |
419 | status_buffer, ret); | |
420 | ||
421 | dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer); | |
422 | status[0] = status_buffer[0]; | |
423 | kfree(status_buffer); | |
424 | ||
425 | return ret; | |
426 | } | |
427 | ||
428 | /* select the work mode. | |
429 | * NOTE this function not supported by spcp825-007 */ | |
430 | static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, | |
431 | u16 index, enum spcp8x5_type type) | |
432 | { | |
433 | int ret; | |
434 | ||
435 | /* I return Permited not support here but seem inval device | |
436 | * is more fix */ | |
437 | if (type == SPCP825_007_TYPE) | |
438 | return; | |
439 | ||
440 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
441 | SET_WORKING_MODE_TYPE, SET_WORKING_MODE, | |
442 | value, index, NULL, 0, 100); | |
443 | dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index); | |
444 | if (ret < 0) | |
445 | dev_dbg(&dev->dev, | |
446 | "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); | |
447 | } | |
448 | ||
449 | /* close the serial port. We should wait for data sending to device 1st and | |
450 | * then kill all urb. */ | |
95da310e AC |
451 | static void spcp8x5_close(struct tty_struct *tty, |
452 | struct usb_serial_port *port, struct file *filp) | |
619a6f1d GKH |
453 | { |
454 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
455 | unsigned long flags; | |
456 | unsigned int c_cflag; | |
457 | int bps; | |
458 | long timeout; | |
459 | wait_queue_t wait; | |
460 | int result; | |
461 | ||
462 | dbg("%s - port %d", __func__, port->number); | |
463 | ||
464 | /* wait for data to drain from the buffer */ | |
465 | spin_lock_irqsave(&priv->lock, flags); | |
466 | timeout = SPCP8x5_CLOSING_WAIT; | |
467 | init_waitqueue_entry(&wait, current); | |
95da310e | 468 | add_wait_queue(&tty->write_wait, &wait); |
619a6f1d GKH |
469 | for (;;) { |
470 | set_current_state(TASK_INTERRUPTIBLE); | |
471 | if (ringbuf_avail_data(priv->buf) == 0 || | |
472 | timeout == 0 || signal_pending(current)) | |
473 | break; | |
474 | spin_unlock_irqrestore(&priv->lock, flags); | |
475 | timeout = schedule_timeout(timeout); | |
476 | spin_lock_irqsave(&priv->lock, flags); | |
477 | } | |
478 | set_current_state(TASK_RUNNING); | |
95da310e | 479 | remove_wait_queue(&tty->write_wait, &wait); |
619a6f1d GKH |
480 | |
481 | /* clear out any remaining data in the buffer */ | |
482 | clear_ringbuf(priv->buf); | |
483 | spin_unlock_irqrestore(&priv->lock, flags); | |
484 | ||
485 | /* wait for characters to drain from the device (this is long enough | |
486 | * for the entire all byte spcp8x5 hardware buffer to drain with no | |
487 | * flow control for data rates of 1200 bps or more, for lower rates we | |
488 | * should really know how much data is in the buffer to compute a delay | |
489 | * that is not unnecessarily long) */ | |
95da310e | 490 | bps = tty_get_baud_rate(tty); |
619a6f1d GKH |
491 | if (bps > 1200) |
492 | timeout = max((HZ*2560) / bps, HZ/10); | |
493 | else | |
494 | timeout = 2*HZ; | |
495 | set_current_state(TASK_INTERRUPTIBLE); | |
496 | schedule_timeout(timeout); | |
497 | ||
498 | /* clear control lines */ | |
95da310e AC |
499 | if (tty) { |
500 | c_cflag = tty->termios->c_cflag; | |
619a6f1d GKH |
501 | if (c_cflag & HUPCL) { |
502 | spin_lock_irqsave(&priv->lock, flags); | |
503 | priv->line_control = 0; | |
504 | spin_unlock_irqrestore(&priv->lock, flags); | |
505 | spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type); | |
506 | } | |
507 | } | |
508 | ||
509 | /* kill urb */ | |
510 | if (port->write_urb != NULL) { | |
511 | result = usb_unlink_urb(port->write_urb); | |
512 | if (result) | |
513 | dev_dbg(&port->dev, | |
514 | "usb_unlink_urb(write_urb) = %d\n", result); | |
515 | } | |
516 | result = usb_unlink_urb(port->read_urb); | |
517 | if (result) | |
518 | dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result); | |
519 | } | |
520 | ||
521 | /* set the serial param for transfer. we should check if we really need to | |
95da310e AC |
522 | * transfer. if we set flow control we should do this too. */ |
523 | static void spcp8x5_set_termios(struct tty_struct *tty, | |
524 | struct usb_serial_port *port, struct ktermios *old_termios) | |
619a6f1d GKH |
525 | { |
526 | struct usb_serial *serial = port->serial; | |
527 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
528 | unsigned long flags; | |
95da310e | 529 | unsigned int cflag = tty->termios->c_cflag; |
619a6f1d GKH |
530 | unsigned int old_cflag = old_termios->c_cflag; |
531 | unsigned short uartdata; | |
532 | unsigned char buf[2] = {0, 0}; | |
533 | int baud; | |
534 | int i; | |
535 | u8 control; | |
536 | ||
619a6f1d GKH |
537 | /* for the 1st time call this function */ |
538 | spin_lock_irqsave(&priv->lock, flags); | |
539 | if (!priv->termios_initialized) { | |
95da310e AC |
540 | *(tty->termios) = tty_std_termios; |
541 | tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; | |
542 | tty->termios->c_ispeed = 115200; | |
543 | tty->termios->c_ospeed = 115200; | |
619a6f1d GKH |
544 | priv->termios_initialized = 1; |
545 | } | |
546 | spin_unlock_irqrestore(&priv->lock, flags); | |
547 | ||
548 | /* check that they really want us to change something */ | |
95da310e | 549 | if (!tty_termios_hw_change(tty->termios, old_termios)) |
619a6f1d GKH |
550 | return; |
551 | ||
552 | /* set DTR/RTS active */ | |
553 | spin_lock_irqsave(&priv->lock, flags); | |
554 | control = priv->line_control; | |
555 | if ((old_cflag & CBAUD) == B0) { | |
556 | priv->line_control |= MCR_DTR; | |
557 | if (!(old_cflag & CRTSCTS)) | |
558 | priv->line_control |= MCR_RTS; | |
559 | } | |
560 | if (control != priv->line_control) { | |
561 | control = priv->line_control; | |
562 | spin_unlock_irqrestore(&priv->lock, flags); | |
563 | spcp8x5_set_ctrlLine(serial->dev, control , priv->type); | |
564 | } else { | |
565 | spin_unlock_irqrestore(&priv->lock, flags); | |
566 | } | |
567 | ||
568 | /* Set Baud Rate */ | |
95da310e | 569 | baud = tty_get_baud_rate(tty);; |
619a6f1d GKH |
570 | switch (baud) { |
571 | case 300: buf[0] = 0x00; break; | |
572 | case 600: buf[0] = 0x01; break; | |
573 | case 1200: buf[0] = 0x02; break; | |
574 | case 2400: buf[0] = 0x03; break; | |
575 | case 4800: buf[0] = 0x04; break; | |
576 | case 9600: buf[0] = 0x05; break; | |
577 | case 19200: buf[0] = 0x07; break; | |
578 | case 38400: buf[0] = 0x09; break; | |
579 | case 57600: buf[0] = 0x0a; break; | |
580 | case 115200: buf[0] = 0x0b; break; | |
581 | case 230400: buf[0] = 0x0c; break; | |
582 | case 460800: buf[0] = 0x0d; break; | |
583 | case 921600: buf[0] = 0x0e; break; | |
584 | /* case 1200000: buf[0] = 0x0f; break; */ | |
585 | /* case 2400000: buf[0] = 0x10; break; */ | |
586 | case 3000000: buf[0] = 0x11; break; | |
587 | /* case 6000000: buf[0] = 0x12; break; */ | |
588 | case 0: | |
589 | case 1000000: | |
590 | buf[0] = 0x0b; break; | |
591 | default: | |
592 | err("spcp825 driver does not support the baudrate " | |
593 | "requested, using default of 9600."); | |
594 | } | |
595 | ||
596 | /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ | |
597 | if (cflag & CSIZE) { | |
598 | switch (cflag & CSIZE) { | |
599 | case CS5: | |
600 | buf[1] |= SET_UART_FORMAT_SIZE_5; | |
601 | break; | |
602 | case CS6: | |
603 | buf[1] |= SET_UART_FORMAT_SIZE_6; | |
604 | break; | |
605 | case CS7: | |
606 | buf[1] |= SET_UART_FORMAT_SIZE_7; | |
607 | break; | |
608 | default: | |
609 | case CS8: | |
610 | buf[1] |= SET_UART_FORMAT_SIZE_8; | |
611 | break; | |
612 | } | |
613 | } | |
614 | ||
615 | /* Set Stop bit2 : 0:1bit 1:2bit */ | |
616 | buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : | |
617 | SET_UART_FORMAT_STOP_1; | |
618 | ||
619 | /* Set Parity bit3-4 01:Odd 11:Even */ | |
620 | if (cflag & PARENB) { | |
621 | buf[1] |= (cflag & PARODD) ? | |
622 | SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; | |
623 | } else | |
624 | buf[1] |= SET_UART_FORMAT_PAR_NONE; | |
625 | ||
626 | uartdata = buf[0] | buf[1]<<8; | |
627 | ||
628 | i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
629 | SET_UART_FORMAT_TYPE, SET_UART_FORMAT, | |
630 | uartdata, 0, NULL, 0, 100); | |
631 | if (i < 0) | |
632 | err("Set UART format %#x failed (error = %d)", uartdata, i); | |
633 | dbg("0x21:0x40:0:0 %d\n", i); | |
634 | ||
635 | if (cflag & CRTSCTS) { | |
636 | /* enable hardware flow control */ | |
637 | spcp8x5_set_workMode(serial->dev, 0x000a, | |
638 | SET_WORKING_MODE_U2C, priv->type); | |
639 | } | |
640 | return; | |
641 | } | |
642 | ||
643 | /* open the serial port. do some usb system call. set termios and get the line | |
644 | * status of the device. then submit the read urb */ | |
95da310e AC |
645 | static int spcp8x5_open(struct tty_struct *tty, |
646 | struct usb_serial_port *port, struct file *filp) | |
619a6f1d GKH |
647 | { |
648 | struct ktermios tmp_termios; | |
649 | struct usb_serial *serial = port->serial; | |
650 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
651 | int ret; | |
652 | unsigned long flags; | |
653 | u8 status = 0x30; | |
654 | /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */ | |
655 | ||
656 | dbg("%s - port %d", __func__, port->number); | |
657 | ||
658 | usb_clear_halt(serial->dev, port->write_urb->pipe); | |
659 | usb_clear_halt(serial->dev, port->read_urb->pipe); | |
660 | ||
661 | ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
662 | 0x09, 0x00, | |
663 | 0x01, 0x00, NULL, 0x00, 100); | |
664 | if (ret) | |
665 | return ret; | |
666 | ||
667 | spin_lock_irqsave(&priv->lock, flags); | |
95da310e | 668 | if (tty && (tty->termios->c_cflag & CBAUD)) |
619a6f1d GKH |
669 | priv->line_control = MCR_DTR | MCR_RTS; |
670 | else | |
671 | priv->line_control = 0; | |
672 | spin_unlock_irqrestore(&priv->lock, flags); | |
673 | ||
674 | spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); | |
675 | ||
676 | /* Setup termios */ | |
95da310e AC |
677 | if (tty) |
678 | spcp8x5_set_termios(tty, port, &tmp_termios); | |
619a6f1d GKH |
679 | |
680 | spcp8x5_get_msr(serial->dev, &status, priv->type); | |
681 | ||
682 | /* may be we should update uart status here but now we did not do */ | |
683 | spin_lock_irqsave(&priv->lock, flags); | |
684 | priv->line_status = status & 0xf0 ; | |
685 | spin_unlock_irqrestore(&priv->lock, flags); | |
686 | ||
687 | /* FIXME: need to assert RTS and DTR if CRTSCTS off */ | |
688 | ||
689 | dbg("%s - submitting read urb", __func__); | |
690 | port->read_urb->dev = serial->dev; | |
691 | ret = usb_submit_urb(port->read_urb, GFP_KERNEL); | |
692 | if (ret) { | |
95da310e | 693 | spcp8x5_close(tty, port, NULL); |
619a6f1d GKH |
694 | return -EPROTO; |
695 | } | |
696 | return 0; | |
697 | } | |
698 | ||
699 | /* bulk read call back function. check the status of the urb. if transfer | |
700 | * failed return. then update the status and the tty send data to tty subsys. | |
701 | * submit urb again. | |
702 | */ | |
703 | static void spcp8x5_read_bulk_callback(struct urb *urb) | |
704 | { | |
705 | struct usb_serial_port *port = urb->context; | |
706 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
707 | struct tty_struct *tty; | |
708 | unsigned char *data = urb->transfer_buffer; | |
709 | unsigned long flags; | |
710 | int i; | |
711 | int result; | |
712 | u8 status = 0; | |
713 | char tty_flag; | |
714 | ||
715 | dev_dbg(&port->dev, "start, urb->status = %d, " | |
716 | "urb->actual_length = %d\n,", urb->status, urb->actual_length); | |
717 | ||
718 | /* check the urb status */ | |
719 | if (urb->status) { | |
95da310e | 720 | if (!port->port.count) |
619a6f1d GKH |
721 | return; |
722 | if (urb->status == -EPROTO) { | |
723 | /* spcp8x5 mysteriously fails with -EPROTO */ | |
724 | /* reschedule the read */ | |
725 | urb->status = 0; | |
726 | urb->dev = port->serial->dev; | |
727 | result = usb_submit_urb(urb , GFP_ATOMIC); | |
728 | if (result) | |
729 | dev_dbg(&port->dev, | |
730 | "failed submitting read urb %d\n", | |
731 | result); | |
732 | return; | |
733 | } | |
734 | dev_dbg(&port->dev, "unable to handle the error, exiting.\n"); | |
735 | return; | |
736 | } | |
737 | ||
738 | /* get tty_flag from status */ | |
739 | tty_flag = TTY_NORMAL; | |
740 | ||
741 | spin_lock_irqsave(&priv->lock, flags); | |
742 | status = priv->line_status; | |
743 | priv->line_status &= ~UART_STATE_TRANSIENT_MASK; | |
744 | spin_unlock_irqrestore(&priv->lock, flags); | |
745 | /* wake up the wait for termios */ | |
746 | wake_up_interruptible(&priv->delta_msr_wait); | |
747 | ||
748 | /* break takes precedence over parity, which takes precedence over | |
749 | * framing errors */ | |
750 | if (status & UART_BREAK_ERROR) | |
751 | tty_flag = TTY_BREAK; | |
752 | else if (status & UART_PARITY_ERROR) | |
753 | tty_flag = TTY_PARITY; | |
754 | else if (status & UART_FRAME_ERROR) | |
755 | tty_flag = TTY_FRAME; | |
756 | dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); | |
757 | ||
95da310e | 758 | tty = port->port.tty; |
619a6f1d GKH |
759 | if (tty && urb->actual_length) { |
760 | tty_buffer_request_room(tty, urb->actual_length + 1); | |
761 | /* overrun is special, not associated with a char */ | |
762 | if (status & UART_OVERRUN_ERROR) | |
763 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); | |
764 | for (i = 0; i < urb->actual_length; ++i) | |
765 | tty_insert_flip_char(tty, data[i], tty_flag); | |
766 | tty_flip_buffer_push(tty); | |
767 | } | |
768 | ||
769 | /* Schedule the next read _if_ we are still open */ | |
95da310e | 770 | if (port->port.count) { |
619a6f1d GKH |
771 | urb->dev = port->serial->dev; |
772 | result = usb_submit_urb(urb , GFP_ATOMIC); | |
773 | if (result) | |
774 | dev_dbg(&port->dev, "failed submitting read urb %d\n", | |
775 | result); | |
776 | } | |
777 | ||
778 | return; | |
779 | } | |
780 | ||
781 | /* get data from ring buffer and then write to usb bus */ | |
782 | static void spcp8x5_send(struct usb_serial_port *port) | |
783 | { | |
784 | int count, result; | |
785 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
786 | unsigned long flags; | |
787 | ||
788 | spin_lock_irqsave(&priv->lock, flags); | |
789 | ||
790 | if (priv->write_urb_in_use) { | |
791 | dev_dbg(&port->dev, "write urb still used\n"); | |
792 | spin_unlock_irqrestore(&priv->lock, flags); | |
793 | return; | |
794 | } | |
795 | ||
796 | /* send the 1st urb for writting */ | |
797 | memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size); | |
798 | count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer, | |
799 | port->bulk_out_size); | |
800 | ||
801 | if (count == 0) { | |
802 | spin_unlock_irqrestore(&priv->lock, flags); | |
803 | return; | |
804 | } | |
805 | ||
806 | /* update the urb status */ | |
807 | priv->write_urb_in_use = 1; | |
808 | ||
809 | spin_unlock_irqrestore(&priv->lock, flags); | |
810 | ||
811 | port->write_urb->transfer_buffer_length = count; | |
812 | port->write_urb->dev = port->serial->dev; | |
813 | ||
814 | result = usb_submit_urb(port->write_urb, GFP_ATOMIC); | |
815 | if (result) { | |
816 | dev_dbg(&port->dev, "failed submitting write urb, error %d\n", | |
817 | result); | |
818 | priv->write_urb_in_use = 0; | |
819 | /* TODO: reschedule spcp8x5_send */ | |
820 | } | |
821 | ||
822 | ||
823 | schedule_work(&port->work); | |
824 | } | |
825 | ||
826 | /* this is the call back function for write urb. NOTE we should not sleep in | |
827 | * this routine. check the urb return code and then submit the write urb again | |
828 | * to hold the write loop */ | |
829 | static void spcp8x5_write_bulk_callback(struct urb *urb) | |
830 | { | |
831 | struct usb_serial_port *port = urb->context; | |
832 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
833 | int result; | |
834 | ||
835 | switch (urb->status) { | |
836 | case 0: | |
837 | /* success */ | |
838 | break; | |
839 | case -ECONNRESET: | |
840 | case -ENOENT: | |
841 | case -ESHUTDOWN: | |
842 | /* this urb is terminated, clean up */ | |
843 | dev_dbg(&port->dev, "urb shutting down with status: %d\n", | |
844 | urb->status); | |
845 | priv->write_urb_in_use = 0; | |
846 | return; | |
847 | default: | |
848 | /* error in the urb, so we have to resubmit it */ | |
849 | dbg("%s - Overflow in write", __func__); | |
850 | dbg("%s - nonzero write bulk status received: %d", | |
851 | __func__, urb->status); | |
852 | port->write_urb->transfer_buffer_length = 1; | |
853 | port->write_urb->dev = port->serial->dev; | |
854 | result = usb_submit_urb(port->write_urb, GFP_ATOMIC); | |
855 | if (result) | |
856 | dev_dbg(&port->dev, | |
857 | "failed resubmitting write urb %d\n", result); | |
858 | else | |
859 | return; | |
860 | } | |
861 | ||
862 | priv->write_urb_in_use = 0; | |
863 | ||
864 | /* send any buffered data */ | |
865 | spcp8x5_send(port); | |
866 | } | |
867 | ||
868 | /* write data to ring buffer. and then start the write transfer */ | |
95da310e | 869 | static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port, |
619a6f1d GKH |
870 | const unsigned char *buf, int count) |
871 | { | |
872 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
873 | unsigned long flags; | |
874 | ||
875 | dev_dbg(&port->dev, "%d bytes\n", count); | |
876 | ||
877 | if (!count) | |
878 | return count; | |
879 | ||
880 | spin_lock_irqsave(&priv->lock, flags); | |
881 | count = put_ringbuf(priv->buf, buf, count); | |
882 | spin_unlock_irqrestore(&priv->lock, flags); | |
883 | ||
884 | spcp8x5_send(port); | |
885 | ||
886 | return count; | |
887 | } | |
888 | ||
889 | static int spcp8x5_wait_modem_info(struct usb_serial_port *port, | |
890 | unsigned int arg) | |
891 | { | |
892 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
893 | unsigned long flags; | |
894 | unsigned int prevstatus; | |
895 | unsigned int status; | |
896 | unsigned int changed; | |
897 | ||
898 | spin_lock_irqsave(&priv->lock, flags); | |
899 | prevstatus = priv->line_status; | |
900 | spin_unlock_irqrestore(&priv->lock, flags); | |
901 | ||
902 | while (1) { | |
903 | /* wake up in bulk read */ | |
904 | interruptible_sleep_on(&priv->delta_msr_wait); | |
905 | ||
906 | /* see if a signal did it */ | |
907 | if (signal_pending(current)) | |
908 | return -ERESTARTSYS; | |
909 | ||
910 | spin_lock_irqsave(&priv->lock, flags); | |
911 | status = priv->line_status; | |
912 | spin_unlock_irqrestore(&priv->lock, flags); | |
913 | ||
914 | changed = prevstatus^status; | |
915 | ||
916 | if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) || | |
917 | ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) || | |
918 | ((arg & TIOCM_CD) && (changed & MSR_STATUS_LINE_DCD)) || | |
919 | ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS))) | |
920 | return 0; | |
921 | ||
922 | prevstatus = status; | |
923 | } | |
924 | /* NOTREACHED */ | |
925 | return 0; | |
926 | } | |
927 | ||
95da310e | 928 | static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file, |
619a6f1d GKH |
929 | unsigned int cmd, unsigned long arg) |
930 | { | |
95da310e | 931 | struct usb_serial_port *port = tty->driver_data; |
619a6f1d GKH |
932 | dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); |
933 | ||
934 | switch (cmd) { | |
935 | case TIOCMIWAIT: | |
936 | dbg("%s (%d) TIOCMIWAIT", __func__, port->number); | |
937 | return spcp8x5_wait_modem_info(port, arg); | |
938 | ||
939 | default: | |
940 | dbg("%s not supported = 0x%04x", __func__, cmd); | |
941 | break; | |
942 | } | |
943 | ||
944 | return -ENOIOCTLCMD; | |
945 | } | |
946 | ||
95da310e | 947 | static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file, |
619a6f1d GKH |
948 | unsigned int set, unsigned int clear) |
949 | { | |
95da310e | 950 | struct usb_serial_port *port = tty->driver_data; |
619a6f1d GKH |
951 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); |
952 | unsigned long flags; | |
953 | u8 control; | |
954 | ||
955 | spin_lock_irqsave(&priv->lock, flags); | |
956 | if (set & TIOCM_RTS) | |
957 | priv->line_control |= MCR_RTS; | |
958 | if (set & TIOCM_DTR) | |
959 | priv->line_control |= MCR_DTR; | |
960 | if (clear & TIOCM_RTS) | |
961 | priv->line_control &= ~MCR_RTS; | |
962 | if (clear & TIOCM_DTR) | |
963 | priv->line_control &= ~MCR_DTR; | |
964 | control = priv->line_control; | |
965 | spin_unlock_irqrestore(&priv->lock, flags); | |
966 | ||
967 | return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); | |
968 | } | |
969 | ||
95da310e | 970 | static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file) |
619a6f1d | 971 | { |
95da310e | 972 | struct usb_serial_port *port = tty->driver_data; |
619a6f1d GKH |
973 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); |
974 | unsigned long flags; | |
975 | unsigned int mcr; | |
976 | unsigned int status; | |
977 | unsigned int result; | |
978 | ||
979 | spin_lock_irqsave(&priv->lock, flags); | |
980 | mcr = priv->line_control; | |
981 | status = priv->line_status; | |
982 | spin_unlock_irqrestore(&priv->lock, flags); | |
983 | ||
984 | result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | |
985 | | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | |
986 | | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) | |
987 | | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) | |
988 | | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) | |
989 | | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); | |
990 | ||
991 | return result; | |
992 | } | |
993 | ||
994 | /* get the avail space room in ring buffer */ | |
95da310e | 995 | static int spcp8x5_write_room(struct tty_struct *tty) |
619a6f1d | 996 | { |
95da310e | 997 | struct usb_serial_port *port = tty->driver_data; |
619a6f1d GKH |
998 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); |
999 | int room = 0; | |
1000 | unsigned long flags; | |
1001 | ||
1002 | spin_lock_irqsave(&priv->lock, flags); | |
1003 | room = ringbuf_avail_space(priv->buf); | |
1004 | spin_unlock_irqrestore(&priv->lock, flags); | |
1005 | ||
1006 | return room; | |
1007 | } | |
1008 | ||
1009 | /* get the number of avail data in write ring buffer */ | |
95da310e | 1010 | static int spcp8x5_chars_in_buffer(struct tty_struct *tty) |
619a6f1d | 1011 | { |
95da310e | 1012 | struct usb_serial_port *port = tty->driver_data; |
619a6f1d GKH |
1013 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); |
1014 | int chars = 0; | |
1015 | unsigned long flags; | |
1016 | ||
1017 | spin_lock_irqsave(&priv->lock, flags); | |
1018 | chars = ringbuf_avail_data(priv->buf); | |
1019 | spin_unlock_irqrestore(&priv->lock, flags); | |
1020 | ||
1021 | return chars; | |
1022 | } | |
1023 | ||
1024 | /* All of the device info needed for the spcp8x5 SIO serial converter */ | |
1025 | static struct usb_serial_driver spcp8x5_device = { | |
1026 | .driver = { | |
1027 | .owner = THIS_MODULE, | |
1028 | .name = "SPCP8x5", | |
1029 | }, | |
1030 | .id_table = id_table, | |
619a6f1d GKH |
1031 | .num_ports = 1, |
1032 | .open = spcp8x5_open, | |
1033 | .close = spcp8x5_close, | |
1034 | .write = spcp8x5_write, | |
1035 | .set_termios = spcp8x5_set_termios, | |
1036 | .ioctl = spcp8x5_ioctl, | |
1037 | .tiocmget = spcp8x5_tiocmget, | |
1038 | .tiocmset = spcp8x5_tiocmset, | |
1039 | .write_room = spcp8x5_write_room, | |
1040 | .read_bulk_callback = spcp8x5_read_bulk_callback, | |
1041 | .write_bulk_callback = spcp8x5_write_bulk_callback, | |
1042 | .chars_in_buffer = spcp8x5_chars_in_buffer, | |
1043 | .attach = spcp8x5_startup, | |
1044 | .shutdown = spcp8x5_shutdown, | |
1045 | }; | |
1046 | ||
1047 | static int __init spcp8x5_init(void) | |
1048 | { | |
1049 | int retval; | |
1050 | retval = usb_serial_register(&spcp8x5_device); | |
1051 | if (retval) | |
1052 | goto failed_usb_serial_register; | |
1053 | retval = usb_register(&spcp8x5_driver); | |
1054 | if (retval) | |
1055 | goto failed_usb_register; | |
1056 | info(DRIVER_DESC " " DRIVER_VERSION); | |
1057 | return 0; | |
1058 | failed_usb_register: | |
1059 | usb_serial_deregister(&spcp8x5_device); | |
1060 | failed_usb_serial_register: | |
1061 | return retval; | |
1062 | } | |
1063 | ||
1064 | static void __exit spcp8x5_exit(void) | |
1065 | { | |
1066 | usb_deregister(&spcp8x5_driver); | |
1067 | usb_serial_deregister(&spcp8x5_device); | |
1068 | } | |
1069 | ||
1070 | module_init(spcp8x5_init); | |
1071 | module_exit(spcp8x5_exit); | |
1072 | ||
1073 | MODULE_DESCRIPTION(DRIVER_DESC); | |
1074 | MODULE_VERSION(DRIVER_VERSION); | |
1075 | MODULE_LICENSE("GPL"); | |
1076 | ||
1077 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
1078 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |