Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * ipr.c -- driver for IBM Power Linux RAID adapters | |
3 | * | |
4 | * Written By: Brian King <brking@us.ibm.com>, IBM Corporation | |
5 | * | |
6 | * Copyright (C) 2003, 2004 IBM Corporation | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
21 | * | |
22 | */ | |
23 | ||
24 | /* | |
25 | * Notes: | |
26 | * | |
27 | * This driver is used to control the following SCSI adapters: | |
28 | * | |
29 | * IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B | |
30 | * | |
31 | * IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter | |
32 | * PCI-X Dual Channel Ultra 320 SCSI Adapter | |
33 | * PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card | |
34 | * Embedded SCSI adapter on p615 and p655 systems | |
35 | * | |
36 | * Supported Hardware Features: | |
37 | * - Ultra 320 SCSI controller | |
38 | * - PCI-X host interface | |
39 | * - Embedded PowerPC RISC Processor and Hardware XOR DMA Engine | |
40 | * - Non-Volatile Write Cache | |
41 | * - Supports attachment of non-RAID disks, tape, and optical devices | |
42 | * - RAID Levels 0, 5, 10 | |
43 | * - Hot spare | |
44 | * - Background Parity Checking | |
45 | * - Background Data Scrubbing | |
46 | * - Ability to increase the capacity of an existing RAID 5 disk array | |
47 | * by adding disks | |
48 | * | |
49 | * Driver Features: | |
50 | * - Tagged command queuing | |
51 | * - Adapter microcode download | |
52 | * - PCI hot plug | |
53 | * - SCSI device hot plug | |
54 | * | |
55 | */ | |
56 | ||
57 | #include <linux/config.h> | |
58 | #include <linux/fs.h> | |
59 | #include <linux/init.h> | |
60 | #include <linux/types.h> | |
61 | #include <linux/errno.h> | |
62 | #include <linux/kernel.h> | |
63 | #include <linux/ioport.h> | |
64 | #include <linux/delay.h> | |
65 | #include <linux/pci.h> | |
66 | #include <linux/wait.h> | |
67 | #include <linux/spinlock.h> | |
68 | #include <linux/sched.h> | |
69 | #include <linux/interrupt.h> | |
70 | #include <linux/blkdev.h> | |
71 | #include <linux/firmware.h> | |
72 | #include <linux/module.h> | |
73 | #include <linux/moduleparam.h> | |
74 | #include <asm/io.h> | |
75 | #include <asm/irq.h> | |
76 | #include <asm/processor.h> | |
77 | #include <scsi/scsi.h> | |
78 | #include <scsi/scsi_host.h> | |
79 | #include <scsi/scsi_tcq.h> | |
80 | #include <scsi/scsi_eh.h> | |
81 | #include <scsi/scsi_cmnd.h> | |
82 | #include <scsi/scsi_request.h> | |
83 | #include "ipr.h" | |
84 | ||
85 | /* | |
86 | * Global Data | |
87 | */ | |
88 | static struct list_head ipr_ioa_head = LIST_HEAD_INIT(ipr_ioa_head); | |
89 | static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL; | |
90 | static unsigned int ipr_max_speed = 1; | |
91 | static int ipr_testmode = 0; | |
92 | static unsigned int ipr_fastfail = 0; | |
93 | static unsigned int ipr_transop_timeout = IPR_OPERATIONAL_TIMEOUT; | |
94 | static DEFINE_SPINLOCK(ipr_driver_lock); | |
95 | ||
96 | /* This table describes the differences between DMA controller chips */ | |
97 | static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { | |
98 | { /* Gemstone and Citrine */ | |
99 | .mailbox = 0x0042C, | |
100 | .cache_line_size = 0x20, | |
101 | { | |
102 | .set_interrupt_mask_reg = 0x0022C, | |
103 | .clr_interrupt_mask_reg = 0x00230, | |
104 | .sense_interrupt_mask_reg = 0x0022C, | |
105 | .clr_interrupt_reg = 0x00228, | |
106 | .sense_interrupt_reg = 0x00224, | |
107 | .ioarrin_reg = 0x00404, | |
108 | .sense_uproc_interrupt_reg = 0x00214, | |
109 | .set_uproc_interrupt_reg = 0x00214, | |
110 | .clr_uproc_interrupt_reg = 0x00218 | |
111 | } | |
112 | }, | |
113 | { /* Snipe and Scamp */ | |
114 | .mailbox = 0x0052C, | |
115 | .cache_line_size = 0x20, | |
116 | { | |
117 | .set_interrupt_mask_reg = 0x00288, | |
118 | .clr_interrupt_mask_reg = 0x0028C, | |
119 | .sense_interrupt_mask_reg = 0x00288, | |
120 | .clr_interrupt_reg = 0x00284, | |
121 | .sense_interrupt_reg = 0x00280, | |
122 | .ioarrin_reg = 0x00504, | |
123 | .sense_uproc_interrupt_reg = 0x00290, | |
124 | .set_uproc_interrupt_reg = 0x00290, | |
125 | .clr_uproc_interrupt_reg = 0x00294 | |
126 | } | |
127 | }, | |
128 | }; | |
129 | ||
130 | static const struct ipr_chip_t ipr_chip[] = { | |
131 | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, &ipr_chip_cfg[0] }, | |
132 | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, &ipr_chip_cfg[0] }, | |
133 | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, &ipr_chip_cfg[1] }, | |
134 | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, &ipr_chip_cfg[1] } | |
135 | }; | |
136 | ||
137 | static int ipr_max_bus_speeds [] = { | |
138 | IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE | |
139 | }; | |
140 | ||
141 | MODULE_AUTHOR("Brian King <brking@us.ibm.com>"); | |
142 | MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver"); | |
143 | module_param_named(max_speed, ipr_max_speed, uint, 0); | |
144 | MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320"); | |
145 | module_param_named(log_level, ipr_log_level, uint, 0); | |
146 | MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver"); | |
147 | module_param_named(testmode, ipr_testmode, int, 0); | |
148 | MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations"); | |
149 | module_param_named(fastfail, ipr_fastfail, int, 0); | |
150 | MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries"); | |
151 | module_param_named(transop_timeout, ipr_transop_timeout, int, 0); | |
152 | MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)"); | |
153 | MODULE_LICENSE("GPL"); | |
154 | MODULE_VERSION(IPR_DRIVER_VERSION); | |
155 | ||
156 | static const char *ipr_gpdd_dev_end_states[] = { | |
157 | "Command complete", | |
158 | "Terminated by host", | |
159 | "Terminated by device reset", | |
160 | "Terminated by bus reset", | |
161 | "Unknown", | |
162 | "Command not started" | |
163 | }; | |
164 | ||
165 | static const char *ipr_gpdd_dev_bus_phases[] = { | |
166 | "Bus free", | |
167 | "Arbitration", | |
168 | "Selection", | |
169 | "Message out", | |
170 | "Command", | |
171 | "Message in", | |
172 | "Data out", | |
173 | "Data in", | |
174 | "Status", | |
175 | "Reselection", | |
176 | "Unknown" | |
177 | }; | |
178 | ||
179 | /* A constant array of IOASCs/URCs/Error Messages */ | |
180 | static const | |
181 | struct ipr_error_table_t ipr_error_table[] = { | |
182 | {0x00000000, 1, 1, | |
183 | "8155: An unknown error was received"}, | |
184 | {0x00330000, 0, 0, | |
185 | "Soft underlength error"}, | |
186 | {0x005A0000, 0, 0, | |
187 | "Command to be cancelled not found"}, | |
188 | {0x00808000, 0, 0, | |
189 | "Qualified success"}, | |
190 | {0x01080000, 1, 1, | |
191 | "FFFE: Soft device bus error recovered by the IOA"}, | |
192 | {0x01170600, 0, 1, | |
193 | "FFF9: Device sector reassign successful"}, | |
194 | {0x01170900, 0, 1, | |
195 | "FFF7: Media error recovered by device rewrite procedures"}, | |
196 | {0x01180200, 0, 1, | |
197 | "7001: IOA sector reassignment successful"}, | |
198 | {0x01180500, 0, 1, | |
199 | "FFF9: Soft media error. Sector reassignment recommended"}, | |
200 | {0x01180600, 0, 1, | |
201 | "FFF7: Media error recovered by IOA rewrite procedures"}, | |
202 | {0x01418000, 0, 1, | |
203 | "FF3D: Soft PCI bus error recovered by the IOA"}, | |
204 | {0x01440000, 1, 1, | |
205 | "FFF6: Device hardware error recovered by the IOA"}, | |
206 | {0x01448100, 0, 1, | |
207 | "FFF6: Device hardware error recovered by the device"}, | |
208 | {0x01448200, 1, 1, | |
209 | "FF3D: Soft IOA error recovered by the IOA"}, | |
210 | {0x01448300, 0, 1, | |
211 | "FFFA: Undefined device response recovered by the IOA"}, | |
212 | {0x014A0000, 1, 1, | |
213 | "FFF6: Device bus error, message or command phase"}, | |
214 | {0x015D0000, 0, 1, | |
215 | "FFF6: Failure prediction threshold exceeded"}, | |
216 | {0x015D9200, 0, 1, | |
217 | "8009: Impending cache battery pack failure"}, | |
218 | {0x02040400, 0, 0, | |
219 | "34FF: Disk device format in progress"}, | |
220 | {0x023F0000, 0, 0, | |
221 | "Synchronization required"}, | |
222 | {0x024E0000, 0, 0, | |
223 | "No ready, IOA shutdown"}, | |
224 | {0x025A0000, 0, 0, | |
225 | "Not ready, IOA has been shutdown"}, | |
226 | {0x02670100, 0, 1, | |
227 | "3020: Storage subsystem configuration error"}, | |
228 | {0x03110B00, 0, 0, | |
229 | "FFF5: Medium error, data unreadable, recommend reassign"}, | |
230 | {0x03110C00, 0, 0, | |
231 | "7000: Medium error, data unreadable, do not reassign"}, | |
232 | {0x03310000, 0, 1, | |
233 | "FFF3: Disk media format bad"}, | |
234 | {0x04050000, 0, 1, | |
235 | "3002: Addressed device failed to respond to selection"}, | |
236 | {0x04080000, 1, 1, | |
237 | "3100: Device bus error"}, | |
238 | {0x04080100, 0, 1, | |
239 | "3109: IOA timed out a device command"}, | |
240 | {0x04088000, 0, 0, | |
241 | "3120: SCSI bus is not operational"}, | |
242 | {0x04118000, 0, 1, | |
243 | "9000: IOA reserved area data check"}, | |
244 | {0x04118100, 0, 1, | |
245 | "9001: IOA reserved area invalid data pattern"}, | |
246 | {0x04118200, 0, 1, | |
247 | "9002: IOA reserved area LRC error"}, | |
248 | {0x04320000, 0, 1, | |
249 | "102E: Out of alternate sectors for disk storage"}, | |
250 | {0x04330000, 1, 1, | |
251 | "FFF4: Data transfer underlength error"}, | |
252 | {0x04338000, 1, 1, | |
253 | "FFF4: Data transfer overlength error"}, | |
254 | {0x043E0100, 0, 1, | |
255 | "3400: Logical unit failure"}, | |
256 | {0x04408500, 0, 1, | |
257 | "FFF4: Device microcode is corrupt"}, | |
258 | {0x04418000, 1, 1, | |
259 | "8150: PCI bus error"}, | |
260 | {0x04430000, 1, 0, | |
261 | "Unsupported device bus message received"}, | |
262 | {0x04440000, 1, 1, | |
263 | "FFF4: Disk device problem"}, | |
264 | {0x04448200, 1, 1, | |
265 | "8150: Permanent IOA failure"}, | |
266 | {0x04448300, 0, 1, | |
267 | "3010: Disk device returned wrong response to IOA"}, | |
268 | {0x04448400, 0, 1, | |
269 | "8151: IOA microcode error"}, | |
270 | {0x04448500, 0, 0, | |
271 | "Device bus status error"}, | |
272 | {0x04448600, 0, 1, | |
273 | "8157: IOA error requiring IOA reset to recover"}, | |
274 | {0x04490000, 0, 0, | |
275 | "Message reject received from the device"}, | |
276 | {0x04449200, 0, 1, | |
277 | "8008: A permanent cache battery pack failure occurred"}, | |
278 | {0x0444A000, 0, 1, | |
279 | "9090: Disk unit has been modified after the last known status"}, | |
280 | {0x0444A200, 0, 1, | |
281 | "9081: IOA detected device error"}, | |
282 | {0x0444A300, 0, 1, | |
283 | "9082: IOA detected device error"}, | |
284 | {0x044A0000, 1, 1, | |
285 | "3110: Device bus error, message or command phase"}, | |
286 | {0x04670400, 0, 1, | |
287 | "9091: Incorrect hardware configuration change has been detected"}, | |
288 | {0x046E0000, 0, 1, | |
289 | "FFF4: Command to logical unit failed"}, | |
290 | {0x05240000, 1, 0, | |
291 | "Illegal request, invalid request type or request packet"}, | |
292 | {0x05250000, 0, 0, | |
293 | "Illegal request, invalid resource handle"}, | |
294 | {0x05260000, 0, 0, | |
295 | "Illegal request, invalid field in parameter list"}, | |
296 | {0x05260100, 0, 0, | |
297 | "Illegal request, parameter not supported"}, | |
298 | {0x05260200, 0, 0, | |
299 | "Illegal request, parameter value invalid"}, | |
300 | {0x052C0000, 0, 0, | |
301 | "Illegal request, command sequence error"}, | |
302 | {0x06040500, 0, 1, | |
303 | "9031: Array protection temporarily suspended, protection resuming"}, | |
304 | {0x06040600, 0, 1, | |
305 | "9040: Array protection temporarily suspended, protection resuming"}, | |
306 | {0x06290000, 0, 1, | |
307 | "FFFB: SCSI bus was reset"}, | |
308 | {0x06290500, 0, 0, | |
309 | "FFFE: SCSI bus transition to single ended"}, | |
310 | {0x06290600, 0, 0, | |
311 | "FFFE: SCSI bus transition to LVD"}, | |
312 | {0x06298000, 0, 1, | |
313 | "FFFB: SCSI bus was reset by another initiator"}, | |
314 | {0x063F0300, 0, 1, | |
315 | "3029: A device replacement has occurred"}, | |
316 | {0x064C8000, 0, 1, | |
317 | "9051: IOA cache data exists for a missing or failed device"}, | |
318 | {0x06670100, 0, 1, | |
319 | "9025: Disk unit is not supported at its physical location"}, | |
320 | {0x06670600, 0, 1, | |
321 | "3020: IOA detected a SCSI bus configuration error"}, | |
322 | {0x06678000, 0, 1, | |
323 | "3150: SCSI bus configuration error"}, | |
324 | {0x06690200, 0, 1, | |
325 | "9041: Array protection temporarily suspended"}, | |
326 | {0x06698200, 0, 1, | |
327 | "9042: Corrupt array parity detected on specified device"}, | |
328 | {0x066B0200, 0, 1, | |
329 | "9030: Array no longer protected due to missing or failed disk unit"}, | |
330 | {0x066B8200, 0, 1, | |
331 | "9032: Array exposed but still protected"}, | |
332 | {0x07270000, 0, 0, | |
333 | "Failure due to other device"}, | |
334 | {0x07278000, 0, 1, | |
335 | "9008: IOA does not support functions expected by devices"}, | |
336 | {0x07278100, 0, 1, | |
337 | "9010: Cache data associated with attached devices cannot be found"}, | |
338 | {0x07278200, 0, 1, | |
339 | "9011: Cache data belongs to devices other than those attached"}, | |
340 | {0x07278400, 0, 1, | |
341 | "9020: Array missing 2 or more devices with only 1 device present"}, | |
342 | {0x07278500, 0, 1, | |
343 | "9021: Array missing 2 or more devices with 2 or more devices present"}, | |
344 | {0x07278600, 0, 1, | |
345 | "9022: Exposed array is missing a required device"}, | |
346 | {0x07278700, 0, 1, | |
347 | "9023: Array member(s) not at required physical locations"}, | |
348 | {0x07278800, 0, 1, | |
349 | "9024: Array not functional due to present hardware configuration"}, | |
350 | {0x07278900, 0, 1, | |
351 | "9026: Array not functional due to present hardware configuration"}, | |
352 | {0x07278A00, 0, 1, | |
353 | "9027: Array is missing a device and parity is out of sync"}, | |
354 | {0x07278B00, 0, 1, | |
355 | "9028: Maximum number of arrays already exist"}, | |
356 | {0x07278C00, 0, 1, | |
357 | "9050: Required cache data cannot be located for a disk unit"}, | |
358 | {0x07278D00, 0, 1, | |
359 | "9052: Cache data exists for a device that has been modified"}, | |
360 | {0x07278F00, 0, 1, | |
361 | "9054: IOA resources not available due to previous problems"}, | |
362 | {0x07279100, 0, 1, | |
363 | "9092: Disk unit requires initialization before use"}, | |
364 | {0x07279200, 0, 1, | |
365 | "9029: Incorrect hardware configuration change has been detected"}, | |
366 | {0x07279600, 0, 1, | |
367 | "9060: One or more disk pairs are missing from an array"}, | |
368 | {0x07279700, 0, 1, | |
369 | "9061: One or more disks are missing from an array"}, | |
370 | {0x07279800, 0, 1, | |
371 | "9062: One or more disks are missing from an array"}, | |
372 | {0x07279900, 0, 1, | |
373 | "9063: Maximum number of functional arrays has been exceeded"}, | |
374 | {0x0B260000, 0, 0, | |
375 | "Aborted command, invalid descriptor"}, | |
376 | {0x0B5A0000, 0, 0, | |
377 | "Command terminated by host"} | |
378 | }; | |
379 | ||
380 | static const struct ipr_ses_table_entry ipr_ses_table[] = { | |
381 | { "2104-DL1 ", "XXXXXXXXXXXXXXXX", 80 }, | |
382 | { "2104-TL1 ", "XXXXXXXXXXXXXXXX", 80 }, | |
383 | { "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */ | |
384 | { "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */ | |
385 | { "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */ | |
386 | { "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */ | |
387 | { "2104-DU3 ", "XXXXXXXXXXXXXXXX", 160 }, | |
388 | { "2104-TU3 ", "XXXXXXXXXXXXXXXX", 160 }, | |
389 | { "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 }, | |
390 | { "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 }, | |
391 | { "St V1S2 ", "XXXXXXXXXXXXXXXX", 160 }, | |
392 | { "HSBPD4M PU3SCSI", "XXXXXXX*XXXXXXXX", 160 }, | |
393 | { "VSBPD1H U3SCSI", "XXXXXXX*XXXXXXXX", 160 } | |
394 | }; | |
395 | ||
396 | /* | |
397 | * Function Prototypes | |
398 | */ | |
399 | static int ipr_reset_alert(struct ipr_cmnd *); | |
400 | static void ipr_process_ccn(struct ipr_cmnd *); | |
401 | static void ipr_process_error(struct ipr_cmnd *); | |
402 | static void ipr_reset_ioa_job(struct ipr_cmnd *); | |
403 | static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *, | |
404 | enum ipr_shutdown_type); | |
405 | ||
406 | #ifdef CONFIG_SCSI_IPR_TRACE | |
407 | /** | |
408 | * ipr_trc_hook - Add a trace entry to the driver trace | |
409 | * @ipr_cmd: ipr command struct | |
410 | * @type: trace type | |
411 | * @add_data: additional data | |
412 | * | |
413 | * Return value: | |
414 | * none | |
415 | **/ | |
416 | static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd, | |
417 | u8 type, u32 add_data) | |
418 | { | |
419 | struct ipr_trace_entry *trace_entry; | |
420 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
421 | ||
422 | trace_entry = &ioa_cfg->trace[ioa_cfg->trace_index++]; | |
423 | trace_entry->time = jiffies; | |
424 | trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0]; | |
425 | trace_entry->type = type; | |
426 | trace_entry->cmd_index = ipr_cmd->cmd_index; | |
427 | trace_entry->res_handle = ipr_cmd->ioarcb.res_handle; | |
428 | trace_entry->u.add_data = add_data; | |
429 | } | |
430 | #else | |
431 | #define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0) | |
432 | #endif | |
433 | ||
434 | /** | |
435 | * ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse | |
436 | * @ipr_cmd: ipr command struct | |
437 | * | |
438 | * Return value: | |
439 | * none | |
440 | **/ | |
441 | static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd) | |
442 | { | |
443 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
444 | struct ipr_ioasa *ioasa = &ipr_cmd->ioasa; | |
445 | ||
446 | memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt)); | |
447 | ioarcb->write_data_transfer_length = 0; | |
448 | ioarcb->read_data_transfer_length = 0; | |
449 | ioarcb->write_ioadl_len = 0; | |
450 | ioarcb->read_ioadl_len = 0; | |
451 | ioasa->ioasc = 0; | |
452 | ioasa->residual_data_len = 0; | |
453 | ||
454 | ipr_cmd->scsi_cmd = NULL; | |
455 | ipr_cmd->sense_buffer[0] = 0; | |
456 | ipr_cmd->dma_use_sg = 0; | |
457 | } | |
458 | ||
459 | /** | |
460 | * ipr_init_ipr_cmnd - Initialize an IPR Cmnd block | |
461 | * @ipr_cmd: ipr command struct | |
462 | * | |
463 | * Return value: | |
464 | * none | |
465 | **/ | |
466 | static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd) | |
467 | { | |
468 | ipr_reinit_ipr_cmnd(ipr_cmd); | |
469 | ipr_cmd->u.scratch = 0; | |
470 | ipr_cmd->sibling = NULL; | |
471 | init_timer(&ipr_cmd->timer); | |
472 | } | |
473 | ||
474 | /** | |
475 | * ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block | |
476 | * @ioa_cfg: ioa config struct | |
477 | * | |
478 | * Return value: | |
479 | * pointer to ipr command struct | |
480 | **/ | |
481 | static | |
482 | struct ipr_cmnd *ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg *ioa_cfg) | |
483 | { | |
484 | struct ipr_cmnd *ipr_cmd; | |
485 | ||
486 | ipr_cmd = list_entry(ioa_cfg->free_q.next, struct ipr_cmnd, queue); | |
487 | list_del(&ipr_cmd->queue); | |
488 | ipr_init_ipr_cmnd(ipr_cmd); | |
489 | ||
490 | return ipr_cmd; | |
491 | } | |
492 | ||
493 | /** | |
494 | * ipr_unmap_sglist - Unmap scatterlist if mapped | |
495 | * @ioa_cfg: ioa config struct | |
496 | * @ipr_cmd: ipr command struct | |
497 | * | |
498 | * Return value: | |
499 | * nothing | |
500 | **/ | |
501 | static void ipr_unmap_sglist(struct ipr_ioa_cfg *ioa_cfg, | |
502 | struct ipr_cmnd *ipr_cmd) | |
503 | { | |
504 | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | |
505 | ||
506 | if (ipr_cmd->dma_use_sg) { | |
507 | if (scsi_cmd->use_sg > 0) { | |
508 | pci_unmap_sg(ioa_cfg->pdev, scsi_cmd->request_buffer, | |
509 | scsi_cmd->use_sg, | |
510 | scsi_cmd->sc_data_direction); | |
511 | } else { | |
512 | pci_unmap_single(ioa_cfg->pdev, ipr_cmd->dma_handle, | |
513 | scsi_cmd->request_bufflen, | |
514 | scsi_cmd->sc_data_direction); | |
515 | } | |
516 | } | |
517 | } | |
518 | ||
519 | /** | |
520 | * ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts | |
521 | * @ioa_cfg: ioa config struct | |
522 | * @clr_ints: interrupts to clear | |
523 | * | |
524 | * This function masks all interrupts on the adapter, then clears the | |
525 | * interrupts specified in the mask | |
526 | * | |
527 | * Return value: | |
528 | * none | |
529 | **/ | |
530 | static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg, | |
531 | u32 clr_ints) | |
532 | { | |
533 | volatile u32 int_reg; | |
534 | ||
535 | /* Stop new interrupts */ | |
536 | ioa_cfg->allow_interrupts = 0; | |
537 | ||
538 | /* Set interrupt mask to stop all new interrupts */ | |
539 | writel(~0, ioa_cfg->regs.set_interrupt_mask_reg); | |
540 | ||
541 | /* Clear any pending interrupts */ | |
542 | writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg); | |
543 | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | |
544 | } | |
545 | ||
546 | /** | |
547 | * ipr_save_pcix_cmd_reg - Save PCI-X command register | |
548 | * @ioa_cfg: ioa config struct | |
549 | * | |
550 | * Return value: | |
551 | * 0 on success / -EIO on failure | |
552 | **/ | |
553 | static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg) | |
554 | { | |
555 | int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX); | |
556 | ||
557 | if (pcix_cmd_reg == 0) { | |
558 | dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n"); | |
559 | return -EIO; | |
560 | } | |
561 | ||
562 | if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD, | |
563 | &ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) { | |
564 | dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n"); | |
565 | return -EIO; | |
566 | } | |
567 | ||
568 | ioa_cfg->saved_pcix_cmd_reg |= PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO; | |
569 | return 0; | |
570 | } | |
571 | ||
572 | /** | |
573 | * ipr_set_pcix_cmd_reg - Setup PCI-X command register | |
574 | * @ioa_cfg: ioa config struct | |
575 | * | |
576 | * Return value: | |
577 | * 0 on success / -EIO on failure | |
578 | **/ | |
579 | static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg) | |
580 | { | |
581 | int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX); | |
582 | ||
583 | if (pcix_cmd_reg) { | |
584 | if (pci_write_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD, | |
585 | ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) { | |
586 | dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n"); | |
587 | return -EIO; | |
588 | } | |
589 | } else { | |
590 | dev_err(&ioa_cfg->pdev->dev, | |
591 | "Failed to setup PCI-X command register\n"); | |
592 | return -EIO; | |
593 | } | |
594 | ||
595 | return 0; | |
596 | } | |
597 | ||
598 | /** | |
599 | * ipr_scsi_eh_done - mid-layer done function for aborted ops | |
600 | * @ipr_cmd: ipr command struct | |
601 | * | |
602 | * This function is invoked by the interrupt handler for | |
603 | * ops generated by the SCSI mid-layer which are being aborted. | |
604 | * | |
605 | * Return value: | |
606 | * none | |
607 | **/ | |
608 | static void ipr_scsi_eh_done(struct ipr_cmnd *ipr_cmd) | |
609 | { | |
610 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
611 | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | |
612 | ||
613 | scsi_cmd->result |= (DID_ERROR << 16); | |
614 | ||
615 | ipr_unmap_sglist(ioa_cfg, ipr_cmd); | |
616 | scsi_cmd->scsi_done(scsi_cmd); | |
617 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
618 | } | |
619 | ||
620 | /** | |
621 | * ipr_fail_all_ops - Fails all outstanding ops. | |
622 | * @ioa_cfg: ioa config struct | |
623 | * | |
624 | * This function fails all outstanding ops. | |
625 | * | |
626 | * Return value: | |
627 | * none | |
628 | **/ | |
629 | static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg) | |
630 | { | |
631 | struct ipr_cmnd *ipr_cmd, *temp; | |
632 | ||
633 | ENTER; | |
634 | list_for_each_entry_safe(ipr_cmd, temp, &ioa_cfg->pending_q, queue) { | |
635 | list_del(&ipr_cmd->queue); | |
636 | ||
637 | ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET); | |
638 | ipr_cmd->ioasa.ilid = cpu_to_be32(IPR_DRIVER_ILID); | |
639 | ||
640 | if (ipr_cmd->scsi_cmd) | |
641 | ipr_cmd->done = ipr_scsi_eh_done; | |
642 | ||
643 | ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, IPR_IOASC_IOA_WAS_RESET); | |
644 | del_timer(&ipr_cmd->timer); | |
645 | ipr_cmd->done(ipr_cmd); | |
646 | } | |
647 | ||
648 | LEAVE; | |
649 | } | |
650 | ||
651 | /** | |
652 | * ipr_do_req - Send driver initiated requests. | |
653 | * @ipr_cmd: ipr command struct | |
654 | * @done: done function | |
655 | * @timeout_func: timeout function | |
656 | * @timeout: timeout value | |
657 | * | |
658 | * This function sends the specified command to the adapter with the | |
659 | * timeout given. The done function is invoked on command completion. | |
660 | * | |
661 | * Return value: | |
662 | * none | |
663 | **/ | |
664 | static void ipr_do_req(struct ipr_cmnd *ipr_cmd, | |
665 | void (*done) (struct ipr_cmnd *), | |
666 | void (*timeout_func) (struct ipr_cmnd *), u32 timeout) | |
667 | { | |
668 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
669 | ||
670 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q); | |
671 | ||
672 | ipr_cmd->done = done; | |
673 | ||
674 | ipr_cmd->timer.data = (unsigned long) ipr_cmd; | |
675 | ipr_cmd->timer.expires = jiffies + timeout; | |
676 | ipr_cmd->timer.function = (void (*)(unsigned long))timeout_func; | |
677 | ||
678 | add_timer(&ipr_cmd->timer); | |
679 | ||
680 | ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0); | |
681 | ||
682 | mb(); | |
683 | writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr), | |
684 | ioa_cfg->regs.ioarrin_reg); | |
685 | } | |
686 | ||
687 | /** | |
688 | * ipr_internal_cmd_done - Op done function for an internally generated op. | |
689 | * @ipr_cmd: ipr command struct | |
690 | * | |
691 | * This function is the op done function for an internally generated, | |
692 | * blocking op. It simply wakes the sleeping thread. | |
693 | * | |
694 | * Return value: | |
695 | * none | |
696 | **/ | |
697 | static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd) | |
698 | { | |
699 | if (ipr_cmd->sibling) | |
700 | ipr_cmd->sibling = NULL; | |
701 | else | |
702 | complete(&ipr_cmd->completion); | |
703 | } | |
704 | ||
705 | /** | |
706 | * ipr_send_blocking_cmd - Send command and sleep on its completion. | |
707 | * @ipr_cmd: ipr command struct | |
708 | * @timeout_func: function to invoke if command times out | |
709 | * @timeout: timeout | |
710 | * | |
711 | * Return value: | |
712 | * none | |
713 | **/ | |
714 | static void ipr_send_blocking_cmd(struct ipr_cmnd *ipr_cmd, | |
715 | void (*timeout_func) (struct ipr_cmnd *ipr_cmd), | |
716 | u32 timeout) | |
717 | { | |
718 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
719 | ||
720 | init_completion(&ipr_cmd->completion); | |
721 | ipr_do_req(ipr_cmd, ipr_internal_cmd_done, timeout_func, timeout); | |
722 | ||
723 | spin_unlock_irq(ioa_cfg->host->host_lock); | |
724 | wait_for_completion(&ipr_cmd->completion); | |
725 | spin_lock_irq(ioa_cfg->host->host_lock); | |
726 | } | |
727 | ||
728 | /** | |
729 | * ipr_send_hcam - Send an HCAM to the adapter. | |
730 | * @ioa_cfg: ioa config struct | |
731 | * @type: HCAM type | |
732 | * @hostrcb: hostrcb struct | |
733 | * | |
734 | * This function will send a Host Controlled Async command to the adapter. | |
735 | * If HCAMs are currently not allowed to be issued to the adapter, it will | |
736 | * place the hostrcb on the free queue. | |
737 | * | |
738 | * Return value: | |
739 | * none | |
740 | **/ | |
741 | static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type, | |
742 | struct ipr_hostrcb *hostrcb) | |
743 | { | |
744 | struct ipr_cmnd *ipr_cmd; | |
745 | struct ipr_ioarcb *ioarcb; | |
746 | ||
747 | if (ioa_cfg->allow_cmds) { | |
748 | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | |
749 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q); | |
750 | list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_pending_q); | |
751 | ||
752 | ipr_cmd->u.hostrcb = hostrcb; | |
753 | ioarcb = &ipr_cmd->ioarcb; | |
754 | ||
755 | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | |
756 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_HCAM; | |
757 | ioarcb->cmd_pkt.cdb[0] = IPR_HOST_CONTROLLED_ASYNC; | |
758 | ioarcb->cmd_pkt.cdb[1] = type; | |
759 | ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff; | |
760 | ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff; | |
761 | ||
762 | ioarcb->read_data_transfer_length = cpu_to_be32(sizeof(hostrcb->hcam)); | |
763 | ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
764 | ipr_cmd->ioadl[0].flags_and_data_len = | |
765 | cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(hostrcb->hcam)); | |
766 | ipr_cmd->ioadl[0].address = cpu_to_be32(hostrcb->hostrcb_dma); | |
767 | ||
768 | if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE) | |
769 | ipr_cmd->done = ipr_process_ccn; | |
770 | else | |
771 | ipr_cmd->done = ipr_process_error; | |
772 | ||
773 | ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR); | |
774 | ||
775 | mb(); | |
776 | writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr), | |
777 | ioa_cfg->regs.ioarrin_reg); | |
778 | } else { | |
779 | list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q); | |
780 | } | |
781 | } | |
782 | ||
783 | /** | |
784 | * ipr_init_res_entry - Initialize a resource entry struct. | |
785 | * @res: resource entry struct | |
786 | * | |
787 | * Return value: | |
788 | * none | |
789 | **/ | |
790 | static void ipr_init_res_entry(struct ipr_resource_entry *res) | |
791 | { | |
792 | res->needs_sync_complete = 1; | |
793 | res->in_erp = 0; | |
794 | res->add_to_ml = 0; | |
795 | res->del_from_ml = 0; | |
796 | res->resetting_device = 0; | |
797 | res->sdev = NULL; | |
798 | } | |
799 | ||
800 | /** | |
801 | * ipr_handle_config_change - Handle a config change from the adapter | |
802 | * @ioa_cfg: ioa config struct | |
803 | * @hostrcb: hostrcb | |
804 | * | |
805 | * Return value: | |
806 | * none | |
807 | **/ | |
808 | static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg, | |
809 | struct ipr_hostrcb *hostrcb) | |
810 | { | |
811 | struct ipr_resource_entry *res = NULL; | |
812 | struct ipr_config_table_entry *cfgte; | |
813 | u32 is_ndn = 1; | |
814 | ||
815 | cfgte = &hostrcb->hcam.u.ccn.cfgte; | |
816 | ||
817 | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | |
818 | if (!memcmp(&res->cfgte.res_addr, &cfgte->res_addr, | |
819 | sizeof(cfgte->res_addr))) { | |
820 | is_ndn = 0; | |
821 | break; | |
822 | } | |
823 | } | |
824 | ||
825 | if (is_ndn) { | |
826 | if (list_empty(&ioa_cfg->free_res_q)) { | |
827 | ipr_send_hcam(ioa_cfg, | |
828 | IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, | |
829 | hostrcb); | |
830 | return; | |
831 | } | |
832 | ||
833 | res = list_entry(ioa_cfg->free_res_q.next, | |
834 | struct ipr_resource_entry, queue); | |
835 | ||
836 | list_del(&res->queue); | |
837 | ipr_init_res_entry(res); | |
838 | list_add_tail(&res->queue, &ioa_cfg->used_res_q); | |
839 | } | |
840 | ||
841 | memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry)); | |
842 | ||
843 | if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) { | |
844 | if (res->sdev) { | |
845 | res->sdev->hostdata = NULL; | |
846 | res->del_from_ml = 1; | |
847 | if (ioa_cfg->allow_ml_add_del) | |
848 | schedule_work(&ioa_cfg->work_q); | |
849 | } else | |
850 | list_move_tail(&res->queue, &ioa_cfg->free_res_q); | |
851 | } else if (!res->sdev) { | |
852 | res->add_to_ml = 1; | |
853 | if (ioa_cfg->allow_ml_add_del) | |
854 | schedule_work(&ioa_cfg->work_q); | |
855 | } | |
856 | ||
857 | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); | |
858 | } | |
859 | ||
860 | /** | |
861 | * ipr_process_ccn - Op done function for a CCN. | |
862 | * @ipr_cmd: ipr command struct | |
863 | * | |
864 | * This function is the op done function for a configuration | |
865 | * change notification host controlled async from the adapter. | |
866 | * | |
867 | * Return value: | |
868 | * none | |
869 | **/ | |
870 | static void ipr_process_ccn(struct ipr_cmnd *ipr_cmd) | |
871 | { | |
872 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
873 | struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb; | |
874 | u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
875 | ||
876 | list_del(&hostrcb->queue); | |
877 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
878 | ||
879 | if (ioasc) { | |
880 | if (ioasc != IPR_IOASC_IOA_WAS_RESET) | |
881 | dev_err(&ioa_cfg->pdev->dev, | |
882 | "Host RCB failed with IOASC: 0x%08X\n", ioasc); | |
883 | ||
884 | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); | |
885 | } else { | |
886 | ipr_handle_config_change(ioa_cfg, hostrcb); | |
887 | } | |
888 | } | |
889 | ||
890 | /** | |
891 | * ipr_log_vpd - Log the passed VPD to the error log. | |
cfc32139 | 892 | * @vpd: vendor/product id/sn struct |
1da177e4 LT |
893 | * |
894 | * Return value: | |
895 | * none | |
896 | **/ | |
cfc32139 | 897 | static void ipr_log_vpd(struct ipr_vpd *vpd) |
1da177e4 LT |
898 | { |
899 | char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN | |
900 | + IPR_SERIAL_NUM_LEN]; | |
901 | ||
cfc32139 | 902 | memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN); |
903 | memcpy(buffer + IPR_VENDOR_ID_LEN, vpd->vpids.product_id, | |
1da177e4 LT |
904 | IPR_PROD_ID_LEN); |
905 | buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN] = '\0'; | |
906 | ipr_err("Vendor/Product ID: %s\n", buffer); | |
907 | ||
cfc32139 | 908 | memcpy(buffer, vpd->sn, IPR_SERIAL_NUM_LEN); |
1da177e4 LT |
909 | buffer[IPR_SERIAL_NUM_LEN] = '\0'; |
910 | ipr_err(" Serial Number: %s\n", buffer); | |
911 | } | |
912 | ||
913 | /** | |
914 | * ipr_log_cache_error - Log a cache error. | |
915 | * @ioa_cfg: ioa config struct | |
916 | * @hostrcb: hostrcb struct | |
917 | * | |
918 | * Return value: | |
919 | * none | |
920 | **/ | |
921 | static void ipr_log_cache_error(struct ipr_ioa_cfg *ioa_cfg, | |
922 | struct ipr_hostrcb *hostrcb) | |
923 | { | |
924 | struct ipr_hostrcb_type_02_error *error = | |
925 | &hostrcb->hcam.u.error.u.type_02_error; | |
926 | ||
927 | ipr_err("-----Current Configuration-----\n"); | |
928 | ipr_err("Cache Directory Card Information:\n"); | |
cfc32139 | 929 | ipr_log_vpd(&error->ioa_vpd); |
1da177e4 | 930 | ipr_err("Adapter Card Information:\n"); |
cfc32139 | 931 | ipr_log_vpd(&error->cfc_vpd); |
1da177e4 LT |
932 | |
933 | ipr_err("-----Expected Configuration-----\n"); | |
934 | ipr_err("Cache Directory Card Information:\n"); | |
cfc32139 | 935 | ipr_log_vpd(&error->ioa_last_attached_to_cfc_vpd); |
1da177e4 | 936 | ipr_err("Adapter Card Information:\n"); |
cfc32139 | 937 | ipr_log_vpd(&error->cfc_last_attached_to_ioa_vpd); |
1da177e4 LT |
938 | |
939 | ipr_err("Additional IOA Data: %08X %08X %08X\n", | |
940 | be32_to_cpu(error->ioa_data[0]), | |
941 | be32_to_cpu(error->ioa_data[1]), | |
942 | be32_to_cpu(error->ioa_data[2])); | |
943 | } | |
944 | ||
945 | /** | |
946 | * ipr_log_config_error - Log a configuration error. | |
947 | * @ioa_cfg: ioa config struct | |
948 | * @hostrcb: hostrcb struct | |
949 | * | |
950 | * Return value: | |
951 | * none | |
952 | **/ | |
953 | static void ipr_log_config_error(struct ipr_ioa_cfg *ioa_cfg, | |
954 | struct ipr_hostrcb *hostrcb) | |
955 | { | |
956 | int errors_logged, i; | |
957 | struct ipr_hostrcb_device_data_entry *dev_entry; | |
958 | struct ipr_hostrcb_type_03_error *error; | |
959 | ||
960 | error = &hostrcb->hcam.u.error.u.type_03_error; | |
961 | errors_logged = be32_to_cpu(error->errors_logged); | |
962 | ||
963 | ipr_err("Device Errors Detected/Logged: %d/%d\n", | |
964 | be32_to_cpu(error->errors_detected), errors_logged); | |
965 | ||
cfc32139 | 966 | dev_entry = error->dev; |
1da177e4 LT |
967 | |
968 | for (i = 0; i < errors_logged; i++, dev_entry++) { | |
969 | ipr_err_separator; | |
970 | ||
971 | if (dev_entry->dev_res_addr.bus >= IPR_MAX_NUM_BUSES) { | |
972 | ipr_err("Device %d: missing\n", i + 1); | |
973 | } else { | |
974 | ipr_err("Device %d: %d:%d:%d:%d\n", i + 1, | |
975 | ioa_cfg->host->host_no, dev_entry->dev_res_addr.bus, | |
976 | dev_entry->dev_res_addr.target, dev_entry->dev_res_addr.lun); | |
977 | } | |
cfc32139 | 978 | ipr_log_vpd(&dev_entry->vpd); |
1da177e4 LT |
979 | |
980 | ipr_err("-----New Device Information-----\n"); | |
cfc32139 | 981 | ipr_log_vpd(&dev_entry->new_vpd); |
1da177e4 LT |
982 | |
983 | ipr_err("Cache Directory Card Information:\n"); | |
cfc32139 | 984 | ipr_log_vpd(&dev_entry->ioa_last_with_dev_vpd); |
1da177e4 LT |
985 | |
986 | ipr_err("Adapter Card Information:\n"); | |
cfc32139 | 987 | ipr_log_vpd(&dev_entry->cfc_last_with_dev_vpd); |
1da177e4 LT |
988 | |
989 | ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n", | |
990 | be32_to_cpu(dev_entry->ioa_data[0]), | |
991 | be32_to_cpu(dev_entry->ioa_data[1]), | |
992 | be32_to_cpu(dev_entry->ioa_data[2]), | |
993 | be32_to_cpu(dev_entry->ioa_data[3]), | |
994 | be32_to_cpu(dev_entry->ioa_data[4])); | |
995 | } | |
996 | } | |
997 | ||
998 | /** | |
999 | * ipr_log_array_error - Log an array configuration error. | |
1000 | * @ioa_cfg: ioa config struct | |
1001 | * @hostrcb: hostrcb struct | |
1002 | * | |
1003 | * Return value: | |
1004 | * none | |
1005 | **/ | |
1006 | static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg, | |
1007 | struct ipr_hostrcb *hostrcb) | |
1008 | { | |
1009 | int i; | |
1010 | struct ipr_hostrcb_type_04_error *error; | |
1011 | struct ipr_hostrcb_array_data_entry *array_entry; | |
1012 | const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' }; | |
1013 | ||
1014 | error = &hostrcb->hcam.u.error.u.type_04_error; | |
1015 | ||
1016 | ipr_err_separator; | |
1017 | ||
1018 | ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n", | |
1019 | error->protection_level, | |
1020 | ioa_cfg->host->host_no, | |
1021 | error->last_func_vset_res_addr.bus, | |
1022 | error->last_func_vset_res_addr.target, | |
1023 | error->last_func_vset_res_addr.lun); | |
1024 | ||
1025 | ipr_err_separator; | |
1026 | ||
1027 | array_entry = error->array_member; | |
1028 | ||
1029 | for (i = 0; i < 18; i++) { | |
cfc32139 | 1030 | if (!memcmp(array_entry->vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN)) |
1da177e4 LT |
1031 | continue; |
1032 | ||
1033 | if (be32_to_cpu(error->exposed_mode_adn) == i) { | |
1034 | ipr_err("Exposed Array Member %d:\n", i); | |
1035 | } else { | |
1036 | ipr_err("Array Member %d:\n", i); | |
1037 | } | |
1038 | ||
cfc32139 | 1039 | ipr_log_vpd(&array_entry->vpd); |
1da177e4 LT |
1040 | |
1041 | if (array_entry->dev_res_addr.bus >= IPR_MAX_NUM_BUSES) { | |
1042 | ipr_err("Current Location: unknown\n"); | |
1043 | } else { | |
1044 | ipr_err("Current Location: %d:%d:%d:%d\n", | |
1045 | ioa_cfg->host->host_no, | |
1046 | array_entry->dev_res_addr.bus, | |
1047 | array_entry->dev_res_addr.target, | |
1048 | array_entry->dev_res_addr.lun); | |
1049 | } | |
1050 | ||
1b69f645 | 1051 | if (array_entry->expected_dev_res_addr.bus >= IPR_MAX_NUM_BUSES) { |
1da177e4 LT |
1052 | ipr_err("Expected Location: unknown\n"); |
1053 | } else { | |
1054 | ipr_err("Expected Location: %d:%d:%d:%d\n", | |
1055 | ioa_cfg->host->host_no, | |
1056 | array_entry->expected_dev_res_addr.bus, | |
1057 | array_entry->expected_dev_res_addr.target, | |
1058 | array_entry->expected_dev_res_addr.lun); | |
1059 | } | |
1060 | ||
1061 | ipr_err_separator; | |
1062 | ||
1063 | if (i == 9) | |
1064 | array_entry = error->array_member2; | |
1065 | else | |
1066 | array_entry++; | |
1067 | } | |
1068 | } | |
1069 | ||
1070 | /** | |
1071 | * ipr_log_generic_error - Log an adapter error. | |
1072 | * @ioa_cfg: ioa config struct | |
1073 | * @hostrcb: hostrcb struct | |
1074 | * | |
1075 | * Return value: | |
1076 | * none | |
1077 | **/ | |
1078 | static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg, | |
1079 | struct ipr_hostrcb *hostrcb) | |
1080 | { | |
1081 | int i; | |
1082 | int ioa_data_len = be32_to_cpu(hostrcb->hcam.length); | |
1083 | ||
1084 | if (ioa_data_len == 0) | |
1085 | return; | |
1086 | ||
1087 | ipr_err("IOA Error Data:\n"); | |
1088 | ipr_err("Offset 0 1 2 3 4 5 6 7 8 9 A B C D E F\n"); | |
1089 | ||
1090 | for (i = 0; i < ioa_data_len / 4; i += 4) { | |
1091 | ipr_err("%08X: %08X %08X %08X %08X\n", i*4, | |
1092 | be32_to_cpu(hostrcb->hcam.u.raw.data[i]), | |
1093 | be32_to_cpu(hostrcb->hcam.u.raw.data[i+1]), | |
1094 | be32_to_cpu(hostrcb->hcam.u.raw.data[i+2]), | |
1095 | be32_to_cpu(hostrcb->hcam.u.raw.data[i+3])); | |
1096 | } | |
1097 | } | |
1098 | ||
1099 | /** | |
1100 | * ipr_get_error - Find the specfied IOASC in the ipr_error_table. | |
1101 | * @ioasc: IOASC | |
1102 | * | |
1103 | * This function will return the index of into the ipr_error_table | |
1104 | * for the specified IOASC. If the IOASC is not in the table, | |
1105 | * 0 will be returned, which points to the entry used for unknown errors. | |
1106 | * | |
1107 | * Return value: | |
1108 | * index into the ipr_error_table | |
1109 | **/ | |
1110 | static u32 ipr_get_error(u32 ioasc) | |
1111 | { | |
1112 | int i; | |
1113 | ||
1114 | for (i = 0; i < ARRAY_SIZE(ipr_error_table); i++) | |
1115 | if (ipr_error_table[i].ioasc == ioasc) | |
1116 | return i; | |
1117 | ||
1118 | return 0; | |
1119 | } | |
1120 | ||
1121 | /** | |
1122 | * ipr_handle_log_data - Log an adapter error. | |
1123 | * @ioa_cfg: ioa config struct | |
1124 | * @hostrcb: hostrcb struct | |
1125 | * | |
1126 | * This function logs an adapter error to the system. | |
1127 | * | |
1128 | * Return value: | |
1129 | * none | |
1130 | **/ | |
1131 | static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg, | |
1132 | struct ipr_hostrcb *hostrcb) | |
1133 | { | |
1134 | u32 ioasc; | |
1135 | int error_index; | |
1136 | ||
1137 | if (hostrcb->hcam.notify_type != IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY) | |
1138 | return; | |
1139 | ||
1140 | if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST) | |
1141 | dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n"); | |
1142 | ||
1143 | ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc); | |
1144 | ||
1145 | if (ioasc == IPR_IOASC_BUS_WAS_RESET || | |
1146 | ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER) { | |
1147 | /* Tell the midlayer we had a bus reset so it will handle the UA properly */ | |
1148 | scsi_report_bus_reset(ioa_cfg->host, | |
1149 | hostrcb->hcam.u.error.failing_dev_res_addr.bus); | |
1150 | } | |
1151 | ||
1152 | error_index = ipr_get_error(ioasc); | |
1153 | ||
1154 | if (!ipr_error_table[error_index].log_hcam) | |
1155 | return; | |
1156 | ||
1157 | if (ipr_is_device(&hostrcb->hcam.u.error.failing_dev_res_addr)) { | |
1158 | ipr_res_err(ioa_cfg, hostrcb->hcam.u.error.failing_dev_res_addr, | |
1159 | "%s\n", ipr_error_table[error_index].error); | |
1160 | } else { | |
1161 | dev_err(&ioa_cfg->pdev->dev, "%s\n", | |
1162 | ipr_error_table[error_index].error); | |
1163 | } | |
1164 | ||
1165 | /* Set indication we have logged an error */ | |
1166 | ioa_cfg->errors_logged++; | |
1167 | ||
1168 | if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL) | |
1169 | return; | |
1170 | ||
1171 | switch (hostrcb->hcam.overlay_id) { | |
1172 | case IPR_HOST_RCB_OVERLAY_ID_1: | |
1173 | ipr_log_generic_error(ioa_cfg, hostrcb); | |
1174 | break; | |
1175 | case IPR_HOST_RCB_OVERLAY_ID_2: | |
1176 | ipr_log_cache_error(ioa_cfg, hostrcb); | |
1177 | break; | |
1178 | case IPR_HOST_RCB_OVERLAY_ID_3: | |
1179 | ipr_log_config_error(ioa_cfg, hostrcb); | |
1180 | break; | |
1181 | case IPR_HOST_RCB_OVERLAY_ID_4: | |
1182 | case IPR_HOST_RCB_OVERLAY_ID_6: | |
1183 | ipr_log_array_error(ioa_cfg, hostrcb); | |
1184 | break; | |
1185 | case IPR_HOST_RCB_OVERLAY_ID_DEFAULT: | |
1186 | ipr_log_generic_error(ioa_cfg, hostrcb); | |
1187 | break; | |
1188 | default: | |
1189 | dev_err(&ioa_cfg->pdev->dev, | |
1190 | "Unknown error received. Overlay ID: %d\n", | |
1191 | hostrcb->hcam.overlay_id); | |
1192 | break; | |
1193 | } | |
1194 | } | |
1195 | ||
1196 | /** | |
1197 | * ipr_process_error - Op done function for an adapter error log. | |
1198 | * @ipr_cmd: ipr command struct | |
1199 | * | |
1200 | * This function is the op done function for an error log host | |
1201 | * controlled async from the adapter. It will log the error and | |
1202 | * send the HCAM back to the adapter. | |
1203 | * | |
1204 | * Return value: | |
1205 | * none | |
1206 | **/ | |
1207 | static void ipr_process_error(struct ipr_cmnd *ipr_cmd) | |
1208 | { | |
1209 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
1210 | struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb; | |
1211 | u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
1212 | ||
1213 | list_del(&hostrcb->queue); | |
1214 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
1215 | ||
1216 | if (!ioasc) { | |
1217 | ipr_handle_log_data(ioa_cfg, hostrcb); | |
1218 | } else if (ioasc != IPR_IOASC_IOA_WAS_RESET) { | |
1219 | dev_err(&ioa_cfg->pdev->dev, | |
1220 | "Host RCB failed with IOASC: 0x%08X\n", ioasc); | |
1221 | } | |
1222 | ||
1223 | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb); | |
1224 | } | |
1225 | ||
1226 | /** | |
1227 | * ipr_timeout - An internally generated op has timed out. | |
1228 | * @ipr_cmd: ipr command struct | |
1229 | * | |
1230 | * This function blocks host requests and initiates an | |
1231 | * adapter reset. | |
1232 | * | |
1233 | * Return value: | |
1234 | * none | |
1235 | **/ | |
1236 | static void ipr_timeout(struct ipr_cmnd *ipr_cmd) | |
1237 | { | |
1238 | unsigned long lock_flags = 0; | |
1239 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
1240 | ||
1241 | ENTER; | |
1242 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1243 | ||
1244 | ioa_cfg->errors_logged++; | |
1245 | dev_err(&ioa_cfg->pdev->dev, | |
1246 | "Adapter being reset due to command timeout.\n"); | |
1247 | ||
1248 | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | |
1249 | ioa_cfg->sdt_state = GET_DUMP; | |
1250 | ||
1251 | if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) | |
1252 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | |
1253 | ||
1254 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1255 | LEAVE; | |
1256 | } | |
1257 | ||
1258 | /** | |
1259 | * ipr_oper_timeout - Adapter timed out transitioning to operational | |
1260 | * @ipr_cmd: ipr command struct | |
1261 | * | |
1262 | * This function blocks host requests and initiates an | |
1263 | * adapter reset. | |
1264 | * | |
1265 | * Return value: | |
1266 | * none | |
1267 | **/ | |
1268 | static void ipr_oper_timeout(struct ipr_cmnd *ipr_cmd) | |
1269 | { | |
1270 | unsigned long lock_flags = 0; | |
1271 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
1272 | ||
1273 | ENTER; | |
1274 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1275 | ||
1276 | ioa_cfg->errors_logged++; | |
1277 | dev_err(&ioa_cfg->pdev->dev, | |
1278 | "Adapter timed out transitioning to operational.\n"); | |
1279 | ||
1280 | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | |
1281 | ioa_cfg->sdt_state = GET_DUMP; | |
1282 | ||
1283 | if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) { | |
1284 | if (ipr_fastfail) | |
1285 | ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES; | |
1286 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | |
1287 | } | |
1288 | ||
1289 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1290 | LEAVE; | |
1291 | } | |
1292 | ||
1293 | /** | |
1294 | * ipr_reset_reload - Reset/Reload the IOA | |
1295 | * @ioa_cfg: ioa config struct | |
1296 | * @shutdown_type: shutdown type | |
1297 | * | |
1298 | * This function resets the adapter and re-initializes it. | |
1299 | * This function assumes that all new host commands have been stopped. | |
1300 | * Return value: | |
1301 | * SUCCESS / FAILED | |
1302 | **/ | |
1303 | static int ipr_reset_reload(struct ipr_ioa_cfg *ioa_cfg, | |
1304 | enum ipr_shutdown_type shutdown_type) | |
1305 | { | |
1306 | if (!ioa_cfg->in_reset_reload) | |
1307 | ipr_initiate_ioa_reset(ioa_cfg, shutdown_type); | |
1308 | ||
1309 | spin_unlock_irq(ioa_cfg->host->host_lock); | |
1310 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
1311 | spin_lock_irq(ioa_cfg->host->host_lock); | |
1312 | ||
1313 | /* If we got hit with a host reset while we were already resetting | |
1314 | the adapter for some reason, and the reset failed. */ | |
1315 | if (ioa_cfg->ioa_is_dead) { | |
1316 | ipr_trace; | |
1317 | return FAILED; | |
1318 | } | |
1319 | ||
1320 | return SUCCESS; | |
1321 | } | |
1322 | ||
1323 | /** | |
1324 | * ipr_find_ses_entry - Find matching SES in SES table | |
1325 | * @res: resource entry struct of SES | |
1326 | * | |
1327 | * Return value: | |
1328 | * pointer to SES table entry / NULL on failure | |
1329 | **/ | |
1330 | static const struct ipr_ses_table_entry * | |
1331 | ipr_find_ses_entry(struct ipr_resource_entry *res) | |
1332 | { | |
1333 | int i, j, matches; | |
1334 | const struct ipr_ses_table_entry *ste = ipr_ses_table; | |
1335 | ||
1336 | for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) { | |
1337 | for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) { | |
1338 | if (ste->compare_product_id_byte[j] == 'X') { | |
1339 | if (res->cfgte.std_inq_data.vpids.product_id[j] == ste->product_id[j]) | |
1340 | matches++; | |
1341 | else | |
1342 | break; | |
1343 | } else | |
1344 | matches++; | |
1345 | } | |
1346 | ||
1347 | if (matches == IPR_PROD_ID_LEN) | |
1348 | return ste; | |
1349 | } | |
1350 | ||
1351 | return NULL; | |
1352 | } | |
1353 | ||
1354 | /** | |
1355 | * ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus | |
1356 | * @ioa_cfg: ioa config struct | |
1357 | * @bus: SCSI bus | |
1358 | * @bus_width: bus width | |
1359 | * | |
1360 | * Return value: | |
1361 | * SCSI bus speed in units of 100KHz, 1600 is 160 MHz | |
1362 | * For a 2-byte wide SCSI bus, the maximum transfer speed is | |
1363 | * twice the maximum transfer rate (e.g. for a wide enabled bus, | |
1364 | * max 160MHz = max 320MB/sec). | |
1365 | **/ | |
1366 | static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_width) | |
1367 | { | |
1368 | struct ipr_resource_entry *res; | |
1369 | const struct ipr_ses_table_entry *ste; | |
1370 | u32 max_xfer_rate = IPR_MAX_SCSI_RATE(bus_width); | |
1371 | ||
1372 | /* Loop through each config table entry in the config table buffer */ | |
1373 | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | |
1374 | if (!(IPR_IS_SES_DEVICE(res->cfgte.std_inq_data))) | |
1375 | continue; | |
1376 | ||
1377 | if (bus != res->cfgte.res_addr.bus) | |
1378 | continue; | |
1379 | ||
1380 | if (!(ste = ipr_find_ses_entry(res))) | |
1381 | continue; | |
1382 | ||
1383 | max_xfer_rate = (ste->max_bus_speed_limit * 10) / (bus_width / 8); | |
1384 | } | |
1385 | ||
1386 | return max_xfer_rate; | |
1387 | } | |
1388 | ||
1389 | /** | |
1390 | * ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA | |
1391 | * @ioa_cfg: ioa config struct | |
1392 | * @max_delay: max delay in micro-seconds to wait | |
1393 | * | |
1394 | * Waits for an IODEBUG ACK from the IOA, doing busy looping. | |
1395 | * | |
1396 | * Return value: | |
1397 | * 0 on success / other on failure | |
1398 | **/ | |
1399 | static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay) | |
1400 | { | |
1401 | volatile u32 pcii_reg; | |
1402 | int delay = 1; | |
1403 | ||
1404 | /* Read interrupt reg until IOA signals IO Debug Acknowledge */ | |
1405 | while (delay < max_delay) { | |
1406 | pcii_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | |
1407 | ||
1408 | if (pcii_reg & IPR_PCII_IO_DEBUG_ACKNOWLEDGE) | |
1409 | return 0; | |
1410 | ||
1411 | /* udelay cannot be used if delay is more than a few milliseconds */ | |
1412 | if ((delay / 1000) > MAX_UDELAY_MS) | |
1413 | mdelay(delay / 1000); | |
1414 | else | |
1415 | udelay(delay); | |
1416 | ||
1417 | delay += delay; | |
1418 | } | |
1419 | return -EIO; | |
1420 | } | |
1421 | ||
1422 | /** | |
1423 | * ipr_get_ldump_data_section - Dump IOA memory | |
1424 | * @ioa_cfg: ioa config struct | |
1425 | * @start_addr: adapter address to dump | |
1426 | * @dest: destination kernel buffer | |
1427 | * @length_in_words: length to dump in 4 byte words | |
1428 | * | |
1429 | * Return value: | |
1430 | * 0 on success / -EIO on failure | |
1431 | **/ | |
1432 | static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg, | |
1433 | u32 start_addr, | |
1434 | __be32 *dest, u32 length_in_words) | |
1435 | { | |
1436 | volatile u32 temp_pcii_reg; | |
1437 | int i, delay = 0; | |
1438 | ||
1439 | /* Write IOA interrupt reg starting LDUMP state */ | |
1440 | writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT), | |
1441 | ioa_cfg->regs.set_uproc_interrupt_reg); | |
1442 | ||
1443 | /* Wait for IO debug acknowledge */ | |
1444 | if (ipr_wait_iodbg_ack(ioa_cfg, | |
1445 | IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC)) { | |
1446 | dev_err(&ioa_cfg->pdev->dev, | |
1447 | "IOA dump long data transfer timeout\n"); | |
1448 | return -EIO; | |
1449 | } | |
1450 | ||
1451 | /* Signal LDUMP interlocked - clear IO debug ack */ | |
1452 | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, | |
1453 | ioa_cfg->regs.clr_interrupt_reg); | |
1454 | ||
1455 | /* Write Mailbox with starting address */ | |
1456 | writel(start_addr, ioa_cfg->ioa_mailbox); | |
1457 | ||
1458 | /* Signal address valid - clear IOA Reset alert */ | |
1459 | writel(IPR_UPROCI_RESET_ALERT, | |
1460 | ioa_cfg->regs.clr_uproc_interrupt_reg); | |
1461 | ||
1462 | for (i = 0; i < length_in_words; i++) { | |
1463 | /* Wait for IO debug acknowledge */ | |
1464 | if (ipr_wait_iodbg_ack(ioa_cfg, | |
1465 | IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC)) { | |
1466 | dev_err(&ioa_cfg->pdev->dev, | |
1467 | "IOA dump short data transfer timeout\n"); | |
1468 | return -EIO; | |
1469 | } | |
1470 | ||
1471 | /* Read data from mailbox and increment destination pointer */ | |
1472 | *dest = cpu_to_be32(readl(ioa_cfg->ioa_mailbox)); | |
1473 | dest++; | |
1474 | ||
1475 | /* For all but the last word of data, signal data received */ | |
1476 | if (i < (length_in_words - 1)) { | |
1477 | /* Signal dump data received - Clear IO debug Ack */ | |
1478 | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, | |
1479 | ioa_cfg->regs.clr_interrupt_reg); | |
1480 | } | |
1481 | } | |
1482 | ||
1483 | /* Signal end of block transfer. Set reset alert then clear IO debug ack */ | |
1484 | writel(IPR_UPROCI_RESET_ALERT, | |
1485 | ioa_cfg->regs.set_uproc_interrupt_reg); | |
1486 | ||
1487 | writel(IPR_UPROCI_IO_DEBUG_ALERT, | |
1488 | ioa_cfg->regs.clr_uproc_interrupt_reg); | |
1489 | ||
1490 | /* Signal dump data received - Clear IO debug Ack */ | |
1491 | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, | |
1492 | ioa_cfg->regs.clr_interrupt_reg); | |
1493 | ||
1494 | /* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */ | |
1495 | while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) { | |
1496 | temp_pcii_reg = | |
1497 | readl(ioa_cfg->regs.sense_uproc_interrupt_reg); | |
1498 | ||
1499 | if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT)) | |
1500 | return 0; | |
1501 | ||
1502 | udelay(10); | |
1503 | delay += 10; | |
1504 | } | |
1505 | ||
1506 | return 0; | |
1507 | } | |
1508 | ||
1509 | #ifdef CONFIG_SCSI_IPR_DUMP | |
1510 | /** | |
1511 | * ipr_sdt_copy - Copy Smart Dump Table to kernel buffer | |
1512 | * @ioa_cfg: ioa config struct | |
1513 | * @pci_address: adapter address | |
1514 | * @length: length of data to copy | |
1515 | * | |
1516 | * Copy data from PCI adapter to kernel buffer. | |
1517 | * Note: length MUST be a 4 byte multiple | |
1518 | * Return value: | |
1519 | * 0 on success / other on failure | |
1520 | **/ | |
1521 | static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg, | |
1522 | unsigned long pci_address, u32 length) | |
1523 | { | |
1524 | int bytes_copied = 0; | |
1525 | int cur_len, rc, rem_len, rem_page_len; | |
1526 | __be32 *page; | |
1527 | unsigned long lock_flags = 0; | |
1528 | struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump; | |
1529 | ||
1530 | while (bytes_copied < length && | |
1531 | (ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) { | |
1532 | if (ioa_dump->page_offset >= PAGE_SIZE || | |
1533 | ioa_dump->page_offset == 0) { | |
1534 | page = (__be32 *)__get_free_page(GFP_ATOMIC); | |
1535 | ||
1536 | if (!page) { | |
1537 | ipr_trace; | |
1538 | return bytes_copied; | |
1539 | } | |
1540 | ||
1541 | ioa_dump->page_offset = 0; | |
1542 | ioa_dump->ioa_data[ioa_dump->next_page_index] = page; | |
1543 | ioa_dump->next_page_index++; | |
1544 | } else | |
1545 | page = ioa_dump->ioa_data[ioa_dump->next_page_index - 1]; | |
1546 | ||
1547 | rem_len = length - bytes_copied; | |
1548 | rem_page_len = PAGE_SIZE - ioa_dump->page_offset; | |
1549 | cur_len = min(rem_len, rem_page_len); | |
1550 | ||
1551 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1552 | if (ioa_cfg->sdt_state == ABORT_DUMP) { | |
1553 | rc = -EIO; | |
1554 | } else { | |
1555 | rc = ipr_get_ldump_data_section(ioa_cfg, | |
1556 | pci_address + bytes_copied, | |
1557 | &page[ioa_dump->page_offset / 4], | |
1558 | (cur_len / sizeof(u32))); | |
1559 | } | |
1560 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1561 | ||
1562 | if (!rc) { | |
1563 | ioa_dump->page_offset += cur_len; | |
1564 | bytes_copied += cur_len; | |
1565 | } else { | |
1566 | ipr_trace; | |
1567 | break; | |
1568 | } | |
1569 | schedule(); | |
1570 | } | |
1571 | ||
1572 | return bytes_copied; | |
1573 | } | |
1574 | ||
1575 | /** | |
1576 | * ipr_init_dump_entry_hdr - Initialize a dump entry header. | |
1577 | * @hdr: dump entry header struct | |
1578 | * | |
1579 | * Return value: | |
1580 | * nothing | |
1581 | **/ | |
1582 | static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header *hdr) | |
1583 | { | |
1584 | hdr->eye_catcher = IPR_DUMP_EYE_CATCHER; | |
1585 | hdr->num_elems = 1; | |
1586 | hdr->offset = sizeof(*hdr); | |
1587 | hdr->status = IPR_DUMP_STATUS_SUCCESS; | |
1588 | } | |
1589 | ||
1590 | /** | |
1591 | * ipr_dump_ioa_type_data - Fill in the adapter type in the dump. | |
1592 | * @ioa_cfg: ioa config struct | |
1593 | * @driver_dump: driver dump struct | |
1594 | * | |
1595 | * Return value: | |
1596 | * nothing | |
1597 | **/ | |
1598 | static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg *ioa_cfg, | |
1599 | struct ipr_driver_dump *driver_dump) | |
1600 | { | |
1601 | struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; | |
1602 | ||
1603 | ipr_init_dump_entry_hdr(&driver_dump->ioa_type_entry.hdr); | |
1604 | driver_dump->ioa_type_entry.hdr.len = | |
1605 | sizeof(struct ipr_dump_ioa_type_entry) - | |
1606 | sizeof(struct ipr_dump_entry_header); | |
1607 | driver_dump->ioa_type_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; | |
1608 | driver_dump->ioa_type_entry.hdr.id = IPR_DUMP_DRIVER_TYPE_ID; | |
1609 | driver_dump->ioa_type_entry.type = ioa_cfg->type; | |
1610 | driver_dump->ioa_type_entry.fw_version = (ucode_vpd->major_release << 24) | | |
1611 | (ucode_vpd->card_type << 16) | (ucode_vpd->minor_release[0] << 8) | | |
1612 | ucode_vpd->minor_release[1]; | |
1613 | driver_dump->hdr.num_entries++; | |
1614 | } | |
1615 | ||
1616 | /** | |
1617 | * ipr_dump_version_data - Fill in the driver version in the dump. | |
1618 | * @ioa_cfg: ioa config struct | |
1619 | * @driver_dump: driver dump struct | |
1620 | * | |
1621 | * Return value: | |
1622 | * nothing | |
1623 | **/ | |
1624 | static void ipr_dump_version_data(struct ipr_ioa_cfg *ioa_cfg, | |
1625 | struct ipr_driver_dump *driver_dump) | |
1626 | { | |
1627 | ipr_init_dump_entry_hdr(&driver_dump->version_entry.hdr); | |
1628 | driver_dump->version_entry.hdr.len = | |
1629 | sizeof(struct ipr_dump_version_entry) - | |
1630 | sizeof(struct ipr_dump_entry_header); | |
1631 | driver_dump->version_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII; | |
1632 | driver_dump->version_entry.hdr.id = IPR_DUMP_DRIVER_VERSION_ID; | |
1633 | strcpy(driver_dump->version_entry.version, IPR_DRIVER_VERSION); | |
1634 | driver_dump->hdr.num_entries++; | |
1635 | } | |
1636 | ||
1637 | /** | |
1638 | * ipr_dump_trace_data - Fill in the IOA trace in the dump. | |
1639 | * @ioa_cfg: ioa config struct | |
1640 | * @driver_dump: driver dump struct | |
1641 | * | |
1642 | * Return value: | |
1643 | * nothing | |
1644 | **/ | |
1645 | static void ipr_dump_trace_data(struct ipr_ioa_cfg *ioa_cfg, | |
1646 | struct ipr_driver_dump *driver_dump) | |
1647 | { | |
1648 | ipr_init_dump_entry_hdr(&driver_dump->trace_entry.hdr); | |
1649 | driver_dump->trace_entry.hdr.len = | |
1650 | sizeof(struct ipr_dump_trace_entry) - | |
1651 | sizeof(struct ipr_dump_entry_header); | |
1652 | driver_dump->trace_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; | |
1653 | driver_dump->trace_entry.hdr.id = IPR_DUMP_TRACE_ID; | |
1654 | memcpy(driver_dump->trace_entry.trace, ioa_cfg->trace, IPR_TRACE_SIZE); | |
1655 | driver_dump->hdr.num_entries++; | |
1656 | } | |
1657 | ||
1658 | /** | |
1659 | * ipr_dump_location_data - Fill in the IOA location in the dump. | |
1660 | * @ioa_cfg: ioa config struct | |
1661 | * @driver_dump: driver dump struct | |
1662 | * | |
1663 | * Return value: | |
1664 | * nothing | |
1665 | **/ | |
1666 | static void ipr_dump_location_data(struct ipr_ioa_cfg *ioa_cfg, | |
1667 | struct ipr_driver_dump *driver_dump) | |
1668 | { | |
1669 | ipr_init_dump_entry_hdr(&driver_dump->location_entry.hdr); | |
1670 | driver_dump->location_entry.hdr.len = | |
1671 | sizeof(struct ipr_dump_location_entry) - | |
1672 | sizeof(struct ipr_dump_entry_header); | |
1673 | driver_dump->location_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII; | |
1674 | driver_dump->location_entry.hdr.id = IPR_DUMP_LOCATION_ID; | |
1675 | strcpy(driver_dump->location_entry.location, ioa_cfg->pdev->dev.bus_id); | |
1676 | driver_dump->hdr.num_entries++; | |
1677 | } | |
1678 | ||
1679 | /** | |
1680 | * ipr_get_ioa_dump - Perform a dump of the driver and adapter. | |
1681 | * @ioa_cfg: ioa config struct | |
1682 | * @dump: dump struct | |
1683 | * | |
1684 | * Return value: | |
1685 | * nothing | |
1686 | **/ | |
1687 | static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump) | |
1688 | { | |
1689 | unsigned long start_addr, sdt_word; | |
1690 | unsigned long lock_flags = 0; | |
1691 | struct ipr_driver_dump *driver_dump = &dump->driver_dump; | |
1692 | struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump; | |
1693 | u32 num_entries, start_off, end_off; | |
1694 | u32 bytes_to_copy, bytes_copied, rc; | |
1695 | struct ipr_sdt *sdt; | |
1696 | int i; | |
1697 | ||
1698 | ENTER; | |
1699 | ||
1700 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1701 | ||
1702 | if (ioa_cfg->sdt_state != GET_DUMP) { | |
1703 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1704 | return; | |
1705 | } | |
1706 | ||
1707 | start_addr = readl(ioa_cfg->ioa_mailbox); | |
1708 | ||
1709 | if (!ipr_sdt_is_fmt2(start_addr)) { | |
1710 | dev_err(&ioa_cfg->pdev->dev, | |
1711 | "Invalid dump table format: %lx\n", start_addr); | |
1712 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1713 | return; | |
1714 | } | |
1715 | ||
1716 | dev_err(&ioa_cfg->pdev->dev, "Dump of IOA initiated\n"); | |
1717 | ||
1718 | driver_dump->hdr.eye_catcher = IPR_DUMP_EYE_CATCHER; | |
1719 | ||
1720 | /* Initialize the overall dump header */ | |
1721 | driver_dump->hdr.len = sizeof(struct ipr_driver_dump); | |
1722 | driver_dump->hdr.num_entries = 1; | |
1723 | driver_dump->hdr.first_entry_offset = sizeof(struct ipr_dump_header); | |
1724 | driver_dump->hdr.status = IPR_DUMP_STATUS_SUCCESS; | |
1725 | driver_dump->hdr.os = IPR_DUMP_OS_LINUX; | |
1726 | driver_dump->hdr.driver_name = IPR_DUMP_DRIVER_NAME; | |
1727 | ||
1728 | ipr_dump_version_data(ioa_cfg, driver_dump); | |
1729 | ipr_dump_location_data(ioa_cfg, driver_dump); | |
1730 | ipr_dump_ioa_type_data(ioa_cfg, driver_dump); | |
1731 | ipr_dump_trace_data(ioa_cfg, driver_dump); | |
1732 | ||
1733 | /* Update dump_header */ | |
1734 | driver_dump->hdr.len += sizeof(struct ipr_dump_entry_header); | |
1735 | ||
1736 | /* IOA Dump entry */ | |
1737 | ipr_init_dump_entry_hdr(&ioa_dump->hdr); | |
1738 | ioa_dump->format = IPR_SDT_FMT2; | |
1739 | ioa_dump->hdr.len = 0; | |
1740 | ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; | |
1741 | ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID; | |
1742 | ||
1743 | /* First entries in sdt are actually a list of dump addresses and | |
1744 | lengths to gather the real dump data. sdt represents the pointer | |
1745 | to the ioa generated dump table. Dump data will be extracted based | |
1746 | on entries in this table */ | |
1747 | sdt = &ioa_dump->sdt; | |
1748 | ||
1749 | rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt, | |
1750 | sizeof(struct ipr_sdt) / sizeof(__be32)); | |
1751 | ||
1752 | /* Smart Dump table is ready to use and the first entry is valid */ | |
1753 | if (rc || (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE)) { | |
1754 | dev_err(&ioa_cfg->pdev->dev, | |
1755 | "Dump of IOA failed. Dump table not valid: %d, %X.\n", | |
1756 | rc, be32_to_cpu(sdt->hdr.state)); | |
1757 | driver_dump->hdr.status = IPR_DUMP_STATUS_FAILED; | |
1758 | ioa_cfg->sdt_state = DUMP_OBTAINED; | |
1759 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1760 | return; | |
1761 | } | |
1762 | ||
1763 | num_entries = be32_to_cpu(sdt->hdr.num_entries_used); | |
1764 | ||
1765 | if (num_entries > IPR_NUM_SDT_ENTRIES) | |
1766 | num_entries = IPR_NUM_SDT_ENTRIES; | |
1767 | ||
1768 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1769 | ||
1770 | for (i = 0; i < num_entries; i++) { | |
1771 | if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) { | |
1772 | driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS; | |
1773 | break; | |
1774 | } | |
1775 | ||
1776 | if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) { | |
1777 | sdt_word = be32_to_cpu(sdt->entry[i].bar_str_offset); | |
1778 | start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK; | |
1779 | end_off = be32_to_cpu(sdt->entry[i].end_offset); | |
1780 | ||
1781 | if (ipr_sdt_is_fmt2(sdt_word) && sdt_word) { | |
1782 | bytes_to_copy = end_off - start_off; | |
1783 | if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) { | |
1784 | sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY; | |
1785 | continue; | |
1786 | } | |
1787 | ||
1788 | /* Copy data from adapter to driver buffers */ | |
1789 | bytes_copied = ipr_sdt_copy(ioa_cfg, sdt_word, | |
1790 | bytes_to_copy); | |
1791 | ||
1792 | ioa_dump->hdr.len += bytes_copied; | |
1793 | ||
1794 | if (bytes_copied != bytes_to_copy) { | |
1795 | driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS; | |
1796 | break; | |
1797 | } | |
1798 | } | |
1799 | } | |
1800 | } | |
1801 | ||
1802 | dev_err(&ioa_cfg->pdev->dev, "Dump of IOA completed.\n"); | |
1803 | ||
1804 | /* Update dump_header */ | |
1805 | driver_dump->hdr.len += ioa_dump->hdr.len; | |
1806 | wmb(); | |
1807 | ioa_cfg->sdt_state = DUMP_OBTAINED; | |
1808 | LEAVE; | |
1809 | } | |
1810 | ||
1811 | #else | |
1812 | #define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0) | |
1813 | #endif | |
1814 | ||
1815 | /** | |
1816 | * ipr_release_dump - Free adapter dump memory | |
1817 | * @kref: kref struct | |
1818 | * | |
1819 | * Return value: | |
1820 | * nothing | |
1821 | **/ | |
1822 | static void ipr_release_dump(struct kref *kref) | |
1823 | { | |
1824 | struct ipr_dump *dump = container_of(kref,struct ipr_dump,kref); | |
1825 | struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg; | |
1826 | unsigned long lock_flags = 0; | |
1827 | int i; | |
1828 | ||
1829 | ENTER; | |
1830 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1831 | ioa_cfg->dump = NULL; | |
1832 | ioa_cfg->sdt_state = INACTIVE; | |
1833 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1834 | ||
1835 | for (i = 0; i < dump->ioa_dump.next_page_index; i++) | |
1836 | free_page((unsigned long) dump->ioa_dump.ioa_data[i]); | |
1837 | ||
1838 | kfree(dump); | |
1839 | LEAVE; | |
1840 | } | |
1841 | ||
1842 | /** | |
1843 | * ipr_worker_thread - Worker thread | |
1844 | * @data: ioa config struct | |
1845 | * | |
1846 | * Called at task level from a work thread. This function takes care | |
1847 | * of adding and removing device from the mid-layer as configuration | |
1848 | * changes are detected by the adapter. | |
1849 | * | |
1850 | * Return value: | |
1851 | * nothing | |
1852 | **/ | |
1853 | static void ipr_worker_thread(void *data) | |
1854 | { | |
1855 | unsigned long lock_flags; | |
1856 | struct ipr_resource_entry *res; | |
1857 | struct scsi_device *sdev; | |
1858 | struct ipr_dump *dump; | |
1859 | struct ipr_ioa_cfg *ioa_cfg = data; | |
1860 | u8 bus, target, lun; | |
1861 | int did_work; | |
1862 | ||
1863 | ENTER; | |
1864 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1865 | ||
1866 | if (ioa_cfg->sdt_state == GET_DUMP) { | |
1867 | dump = ioa_cfg->dump; | |
1868 | if (!dump) { | |
1869 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1870 | return; | |
1871 | } | |
1872 | kref_get(&dump->kref); | |
1873 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1874 | ipr_get_ioa_dump(ioa_cfg, dump); | |
1875 | kref_put(&dump->kref, ipr_release_dump); | |
1876 | ||
1877 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1878 | if (ioa_cfg->sdt_state == DUMP_OBTAINED) | |
1879 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | |
1880 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1881 | return; | |
1882 | } | |
1883 | ||
1884 | restart: | |
1885 | do { | |
1886 | did_work = 0; | |
1887 | if (!ioa_cfg->allow_cmds || !ioa_cfg->allow_ml_add_del) { | |
1888 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1889 | return; | |
1890 | } | |
1891 | ||
1892 | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | |
1893 | if (res->del_from_ml && res->sdev) { | |
1894 | did_work = 1; | |
1895 | sdev = res->sdev; | |
1896 | if (!scsi_device_get(sdev)) { | |
1897 | res->sdev = NULL; | |
1898 | list_move_tail(&res->queue, &ioa_cfg->free_res_q); | |
1899 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1900 | scsi_remove_device(sdev); | |
1901 | scsi_device_put(sdev); | |
1902 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1903 | } | |
1904 | break; | |
1905 | } | |
1906 | } | |
1907 | } while(did_work); | |
1908 | ||
1909 | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | |
1910 | if (res->add_to_ml) { | |
1911 | bus = res->cfgte.res_addr.bus; | |
1912 | target = res->cfgte.res_addr.target; | |
1913 | lun = res->cfgte.res_addr.lun; | |
1914 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1915 | scsi_add_device(ioa_cfg->host, bus, target, lun); | |
1916 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1917 | goto restart; | |
1918 | } | |
1919 | } | |
1920 | ||
1921 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1922 | kobject_uevent(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE, NULL); | |
1923 | LEAVE; | |
1924 | } | |
1925 | ||
1926 | #ifdef CONFIG_SCSI_IPR_TRACE | |
1927 | /** | |
1928 | * ipr_read_trace - Dump the adapter trace | |
1929 | * @kobj: kobject struct | |
1930 | * @buf: buffer | |
1931 | * @off: offset | |
1932 | * @count: buffer size | |
1933 | * | |
1934 | * Return value: | |
1935 | * number of bytes printed to buffer | |
1936 | **/ | |
1937 | static ssize_t ipr_read_trace(struct kobject *kobj, char *buf, | |
1938 | loff_t off, size_t count) | |
1939 | { | |
1940 | struct class_device *cdev = container_of(kobj,struct class_device,kobj); | |
1941 | struct Scsi_Host *shost = class_to_shost(cdev); | |
1942 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
1943 | unsigned long lock_flags = 0; | |
1944 | int size = IPR_TRACE_SIZE; | |
1945 | char *src = (char *)ioa_cfg->trace; | |
1946 | ||
1947 | if (off > size) | |
1948 | return 0; | |
1949 | if (off + count > size) { | |
1950 | size -= off; | |
1951 | count = size; | |
1952 | } | |
1953 | ||
1954 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1955 | memcpy(buf, &src[off], count); | |
1956 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1957 | return count; | |
1958 | } | |
1959 | ||
1960 | static struct bin_attribute ipr_trace_attr = { | |
1961 | .attr = { | |
1962 | .name = "trace", | |
1963 | .mode = S_IRUGO, | |
1964 | }, | |
1965 | .size = 0, | |
1966 | .read = ipr_read_trace, | |
1967 | }; | |
1968 | #endif | |
1969 | ||
1970 | /** | |
1971 | * ipr_show_fw_version - Show the firmware version | |
1972 | * @class_dev: class device struct | |
1973 | * @buf: buffer | |
1974 | * | |
1975 | * Return value: | |
1976 | * number of bytes printed to buffer | |
1977 | **/ | |
1978 | static ssize_t ipr_show_fw_version(struct class_device *class_dev, char *buf) | |
1979 | { | |
1980 | struct Scsi_Host *shost = class_to_shost(class_dev); | |
1981 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
1982 | struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; | |
1983 | unsigned long lock_flags = 0; | |
1984 | int len; | |
1985 | ||
1986 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
1987 | len = snprintf(buf, PAGE_SIZE, "%02X%02X%02X%02X\n", | |
1988 | ucode_vpd->major_release, ucode_vpd->card_type, | |
1989 | ucode_vpd->minor_release[0], | |
1990 | ucode_vpd->minor_release[1]); | |
1991 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
1992 | return len; | |
1993 | } | |
1994 | ||
1995 | static struct class_device_attribute ipr_fw_version_attr = { | |
1996 | .attr = { | |
1997 | .name = "fw_version", | |
1998 | .mode = S_IRUGO, | |
1999 | }, | |
2000 | .show = ipr_show_fw_version, | |
2001 | }; | |
2002 | ||
2003 | /** | |
2004 | * ipr_show_log_level - Show the adapter's error logging level | |
2005 | * @class_dev: class device struct | |
2006 | * @buf: buffer | |
2007 | * | |
2008 | * Return value: | |
2009 | * number of bytes printed to buffer | |
2010 | **/ | |
2011 | static ssize_t ipr_show_log_level(struct class_device *class_dev, char *buf) | |
2012 | { | |
2013 | struct Scsi_Host *shost = class_to_shost(class_dev); | |
2014 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
2015 | unsigned long lock_flags = 0; | |
2016 | int len; | |
2017 | ||
2018 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2019 | len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->log_level); | |
2020 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2021 | return len; | |
2022 | } | |
2023 | ||
2024 | /** | |
2025 | * ipr_store_log_level - Change the adapter's error logging level | |
2026 | * @class_dev: class device struct | |
2027 | * @buf: buffer | |
2028 | * | |
2029 | * Return value: | |
2030 | * number of bytes printed to buffer | |
2031 | **/ | |
2032 | static ssize_t ipr_store_log_level(struct class_device *class_dev, | |
2033 | const char *buf, size_t count) | |
2034 | { | |
2035 | struct Scsi_Host *shost = class_to_shost(class_dev); | |
2036 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
2037 | unsigned long lock_flags = 0; | |
2038 | ||
2039 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2040 | ioa_cfg->log_level = simple_strtoul(buf, NULL, 10); | |
2041 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2042 | return strlen(buf); | |
2043 | } | |
2044 | ||
2045 | static struct class_device_attribute ipr_log_level_attr = { | |
2046 | .attr = { | |
2047 | .name = "log_level", | |
2048 | .mode = S_IRUGO | S_IWUSR, | |
2049 | }, | |
2050 | .show = ipr_show_log_level, | |
2051 | .store = ipr_store_log_level | |
2052 | }; | |
2053 | ||
2054 | /** | |
2055 | * ipr_store_diagnostics - IOA Diagnostics interface | |
2056 | * @class_dev: class_device struct | |
2057 | * @buf: buffer | |
2058 | * @count: buffer size | |
2059 | * | |
2060 | * This function will reset the adapter and wait a reasonable | |
2061 | * amount of time for any errors that the adapter might log. | |
2062 | * | |
2063 | * Return value: | |
2064 | * count on success / other on failure | |
2065 | **/ | |
2066 | static ssize_t ipr_store_diagnostics(struct class_device *class_dev, | |
2067 | const char *buf, size_t count) | |
2068 | { | |
2069 | struct Scsi_Host *shost = class_to_shost(class_dev); | |
2070 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
2071 | unsigned long lock_flags = 0; | |
2072 | int rc = count; | |
2073 | ||
2074 | if (!capable(CAP_SYS_ADMIN)) | |
2075 | return -EACCES; | |
2076 | ||
2077 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
2078 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2079 | ioa_cfg->errors_logged = 0; | |
2080 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); | |
2081 | ||
2082 | if (ioa_cfg->in_reset_reload) { | |
2083 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2084 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
2085 | ||
2086 | /* Wait for a second for any errors to be logged */ | |
2087 | msleep(1000); | |
2088 | } else { | |
2089 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2090 | return -EIO; | |
2091 | } | |
2092 | ||
2093 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2094 | if (ioa_cfg->in_reset_reload || ioa_cfg->errors_logged) | |
2095 | rc = -EIO; | |
2096 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2097 | ||
2098 | return rc; | |
2099 | } | |
2100 | ||
2101 | static struct class_device_attribute ipr_diagnostics_attr = { | |
2102 | .attr = { | |
2103 | .name = "run_diagnostics", | |
2104 | .mode = S_IWUSR, | |
2105 | }, | |
2106 | .store = ipr_store_diagnostics | |
2107 | }; | |
2108 | ||
2109 | /** | |
2110 | * ipr_store_reset_adapter - Reset the adapter | |
2111 | * @class_dev: class_device struct | |
2112 | * @buf: buffer | |
2113 | * @count: buffer size | |
2114 | * | |
2115 | * This function will reset the adapter. | |
2116 | * | |
2117 | * Return value: | |
2118 | * count on success / other on failure | |
2119 | **/ | |
2120 | static ssize_t ipr_store_reset_adapter(struct class_device *class_dev, | |
2121 | const char *buf, size_t count) | |
2122 | { | |
2123 | struct Scsi_Host *shost = class_to_shost(class_dev); | |
2124 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
2125 | unsigned long lock_flags; | |
2126 | int result = count; | |
2127 | ||
2128 | if (!capable(CAP_SYS_ADMIN)) | |
2129 | return -EACCES; | |
2130 | ||
2131 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2132 | if (!ioa_cfg->in_reset_reload) | |
2133 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); | |
2134 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2135 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
2136 | ||
2137 | return result; | |
2138 | } | |
2139 | ||
2140 | static struct class_device_attribute ipr_ioa_reset_attr = { | |
2141 | .attr = { | |
2142 | .name = "reset_host", | |
2143 | .mode = S_IWUSR, | |
2144 | }, | |
2145 | .store = ipr_store_reset_adapter | |
2146 | }; | |
2147 | ||
2148 | /** | |
2149 | * ipr_alloc_ucode_buffer - Allocates a microcode download buffer | |
2150 | * @buf_len: buffer length | |
2151 | * | |
2152 | * Allocates a DMA'able buffer in chunks and assembles a scatter/gather | |
2153 | * list to use for microcode download | |
2154 | * | |
2155 | * Return value: | |
2156 | * pointer to sglist / NULL on failure | |
2157 | **/ | |
2158 | static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len) | |
2159 | { | |
2160 | int sg_size, order, bsize_elem, num_elem, i, j; | |
2161 | struct ipr_sglist *sglist; | |
2162 | struct scatterlist *scatterlist; | |
2163 | struct page *page; | |
2164 | ||
2165 | /* Get the minimum size per scatter/gather element */ | |
2166 | sg_size = buf_len / (IPR_MAX_SGLIST - 1); | |
2167 | ||
2168 | /* Get the actual size per element */ | |
2169 | order = get_order(sg_size); | |
2170 | ||
2171 | /* Determine the actual number of bytes per element */ | |
2172 | bsize_elem = PAGE_SIZE * (1 << order); | |
2173 | ||
2174 | /* Determine the actual number of sg entries needed */ | |
2175 | if (buf_len % bsize_elem) | |
2176 | num_elem = (buf_len / bsize_elem) + 1; | |
2177 | else | |
2178 | num_elem = buf_len / bsize_elem; | |
2179 | ||
2180 | /* Allocate a scatter/gather list for the DMA */ | |
2181 | sglist = kmalloc(sizeof(struct ipr_sglist) + | |
2182 | (sizeof(struct scatterlist) * (num_elem - 1)), | |
2183 | GFP_KERNEL); | |
2184 | ||
2185 | if (sglist == NULL) { | |
2186 | ipr_trace; | |
2187 | return NULL; | |
2188 | } | |
2189 | ||
2190 | memset(sglist, 0, sizeof(struct ipr_sglist) + | |
2191 | (sizeof(struct scatterlist) * (num_elem - 1))); | |
2192 | ||
2193 | scatterlist = sglist->scatterlist; | |
2194 | ||
2195 | sglist->order = order; | |
2196 | sglist->num_sg = num_elem; | |
2197 | ||
2198 | /* Allocate a bunch of sg elements */ | |
2199 | for (i = 0; i < num_elem; i++) { | |
2200 | page = alloc_pages(GFP_KERNEL, order); | |
2201 | if (!page) { | |
2202 | ipr_trace; | |
2203 | ||
2204 | /* Free up what we already allocated */ | |
2205 | for (j = i - 1; j >= 0; j--) | |
2206 | __free_pages(scatterlist[j].page, order); | |
2207 | kfree(sglist); | |
2208 | return NULL; | |
2209 | } | |
2210 | ||
2211 | scatterlist[i].page = page; | |
2212 | } | |
2213 | ||
2214 | return sglist; | |
2215 | } | |
2216 | ||
2217 | /** | |
2218 | * ipr_free_ucode_buffer - Frees a microcode download buffer | |
2219 | * @p_dnld: scatter/gather list pointer | |
2220 | * | |
2221 | * Free a DMA'able ucode download buffer previously allocated with | |
2222 | * ipr_alloc_ucode_buffer | |
2223 | * | |
2224 | * Return value: | |
2225 | * nothing | |
2226 | **/ | |
2227 | static void ipr_free_ucode_buffer(struct ipr_sglist *sglist) | |
2228 | { | |
2229 | int i; | |
2230 | ||
2231 | for (i = 0; i < sglist->num_sg; i++) | |
2232 | __free_pages(sglist->scatterlist[i].page, sglist->order); | |
2233 | ||
2234 | kfree(sglist); | |
2235 | } | |
2236 | ||
2237 | /** | |
2238 | * ipr_copy_ucode_buffer - Copy user buffer to kernel buffer | |
2239 | * @sglist: scatter/gather list pointer | |
2240 | * @buffer: buffer pointer | |
2241 | * @len: buffer length | |
2242 | * | |
2243 | * Copy a microcode image from a user buffer into a buffer allocated by | |
2244 | * ipr_alloc_ucode_buffer | |
2245 | * | |
2246 | * Return value: | |
2247 | * 0 on success / other on failure | |
2248 | **/ | |
2249 | static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist, | |
2250 | u8 *buffer, u32 len) | |
2251 | { | |
2252 | int bsize_elem, i, result = 0; | |
2253 | struct scatterlist *scatterlist; | |
2254 | void *kaddr; | |
2255 | ||
2256 | /* Determine the actual number of bytes per element */ | |
2257 | bsize_elem = PAGE_SIZE * (1 << sglist->order); | |
2258 | ||
2259 | scatterlist = sglist->scatterlist; | |
2260 | ||
2261 | for (i = 0; i < (len / bsize_elem); i++, buffer += bsize_elem) { | |
2262 | kaddr = kmap(scatterlist[i].page); | |
2263 | memcpy(kaddr, buffer, bsize_elem); | |
2264 | kunmap(scatterlist[i].page); | |
2265 | ||
2266 | scatterlist[i].length = bsize_elem; | |
2267 | ||
2268 | if (result != 0) { | |
2269 | ipr_trace; | |
2270 | return result; | |
2271 | } | |
2272 | } | |
2273 | ||
2274 | if (len % bsize_elem) { | |
2275 | kaddr = kmap(scatterlist[i].page); | |
2276 | memcpy(kaddr, buffer, len % bsize_elem); | |
2277 | kunmap(scatterlist[i].page); | |
2278 | ||
2279 | scatterlist[i].length = len % bsize_elem; | |
2280 | } | |
2281 | ||
2282 | sglist->buffer_len = len; | |
2283 | return result; | |
2284 | } | |
2285 | ||
2286 | /** | |
2287 | * ipr_map_ucode_buffer - Map a microcode download buffer | |
2288 | * @ipr_cmd: ipr command struct | |
2289 | * @sglist: scatter/gather list | |
2290 | * @len: total length of download buffer | |
2291 | * | |
2292 | * Maps a microcode download scatter/gather list for DMA and | |
2293 | * builds the IOADL. | |
2294 | * | |
2295 | * Return value: | |
2296 | * 0 on success / -EIO on failure | |
2297 | **/ | |
2298 | static int ipr_map_ucode_buffer(struct ipr_cmnd *ipr_cmd, | |
2299 | struct ipr_sglist *sglist, int len) | |
2300 | { | |
2301 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
2302 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
2303 | struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; | |
2304 | struct scatterlist *scatterlist = sglist->scatterlist; | |
2305 | int i; | |
2306 | ||
2307 | ipr_cmd->dma_use_sg = pci_map_sg(ioa_cfg->pdev, scatterlist, | |
2308 | sglist->num_sg, DMA_TO_DEVICE); | |
2309 | ||
2310 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | |
2311 | ioarcb->write_data_transfer_length = cpu_to_be32(len); | |
2312 | ioarcb->write_ioadl_len = | |
2313 | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | |
2314 | ||
2315 | for (i = 0; i < ipr_cmd->dma_use_sg; i++) { | |
2316 | ioadl[i].flags_and_data_len = | |
2317 | cpu_to_be32(IPR_IOADL_FLAGS_WRITE | sg_dma_len(&scatterlist[i])); | |
2318 | ioadl[i].address = | |
2319 | cpu_to_be32(sg_dma_address(&scatterlist[i])); | |
2320 | } | |
2321 | ||
2322 | if (likely(ipr_cmd->dma_use_sg)) { | |
2323 | ioadl[i-1].flags_and_data_len |= | |
2324 | cpu_to_be32(IPR_IOADL_FLAGS_LAST); | |
2325 | } | |
2326 | else { | |
2327 | dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n"); | |
2328 | return -EIO; | |
2329 | } | |
2330 | ||
2331 | return 0; | |
2332 | } | |
2333 | ||
2334 | /** | |
2335 | * ipr_store_update_fw - Update the firmware on the adapter | |
2336 | * @class_dev: class_device struct | |
2337 | * @buf: buffer | |
2338 | * @count: buffer size | |
2339 | * | |
2340 | * This function will update the firmware on the adapter. | |
2341 | * | |
2342 | * Return value: | |
2343 | * count on success / other on failure | |
2344 | **/ | |
2345 | static ssize_t ipr_store_update_fw(struct class_device *class_dev, | |
2346 | const char *buf, size_t count) | |
2347 | { | |
2348 | struct Scsi_Host *shost = class_to_shost(class_dev); | |
2349 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
2350 | struct ipr_ucode_image_header *image_hdr; | |
2351 | const struct firmware *fw_entry; | |
2352 | struct ipr_sglist *sglist; | |
2353 | unsigned long lock_flags; | |
2354 | char fname[100]; | |
2355 | char *src; | |
2356 | int len, result, dnld_size; | |
2357 | ||
2358 | if (!capable(CAP_SYS_ADMIN)) | |
2359 | return -EACCES; | |
2360 | ||
2361 | len = snprintf(fname, 99, "%s", buf); | |
2362 | fname[len-1] = '\0'; | |
2363 | ||
2364 | if(request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) { | |
2365 | dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname); | |
2366 | return -EIO; | |
2367 | } | |
2368 | ||
2369 | image_hdr = (struct ipr_ucode_image_header *)fw_entry->data; | |
2370 | ||
2371 | if (be32_to_cpu(image_hdr->header_length) > fw_entry->size || | |
2372 | (ioa_cfg->vpd_cbs->page3_data.card_type && | |
2373 | ioa_cfg->vpd_cbs->page3_data.card_type != image_hdr->card_type)) { | |
2374 | dev_err(&ioa_cfg->pdev->dev, "Invalid microcode buffer\n"); | |
2375 | release_firmware(fw_entry); | |
2376 | return -EINVAL; | |
2377 | } | |
2378 | ||
2379 | src = (u8 *)image_hdr + be32_to_cpu(image_hdr->header_length); | |
2380 | dnld_size = fw_entry->size - be32_to_cpu(image_hdr->header_length); | |
2381 | sglist = ipr_alloc_ucode_buffer(dnld_size); | |
2382 | ||
2383 | if (!sglist) { | |
2384 | dev_err(&ioa_cfg->pdev->dev, "Microcode buffer allocation failed\n"); | |
2385 | release_firmware(fw_entry); | |
2386 | return -ENOMEM; | |
2387 | } | |
2388 | ||
2389 | result = ipr_copy_ucode_buffer(sglist, src, dnld_size); | |
2390 | ||
2391 | if (result) { | |
2392 | dev_err(&ioa_cfg->pdev->dev, | |
2393 | "Microcode buffer copy to DMA buffer failed\n"); | |
2394 | ipr_free_ucode_buffer(sglist); | |
2395 | release_firmware(fw_entry); | |
2396 | return result; | |
2397 | } | |
2398 | ||
2399 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2400 | ||
2401 | if (ioa_cfg->ucode_sglist) { | |
2402 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2403 | dev_err(&ioa_cfg->pdev->dev, | |
2404 | "Microcode download already in progress\n"); | |
2405 | ipr_free_ucode_buffer(sglist); | |
2406 | release_firmware(fw_entry); | |
2407 | return -EIO; | |
2408 | } | |
2409 | ||
2410 | ioa_cfg->ucode_sglist = sglist; | |
2411 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); | |
2412 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2413 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
2414 | ||
2415 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2416 | ioa_cfg->ucode_sglist = NULL; | |
2417 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2418 | ||
2419 | ipr_free_ucode_buffer(sglist); | |
2420 | release_firmware(fw_entry); | |
2421 | ||
2422 | return count; | |
2423 | } | |
2424 | ||
2425 | static struct class_device_attribute ipr_update_fw_attr = { | |
2426 | .attr = { | |
2427 | .name = "update_fw", | |
2428 | .mode = S_IWUSR, | |
2429 | }, | |
2430 | .store = ipr_store_update_fw | |
2431 | }; | |
2432 | ||
2433 | static struct class_device_attribute *ipr_ioa_attrs[] = { | |
2434 | &ipr_fw_version_attr, | |
2435 | &ipr_log_level_attr, | |
2436 | &ipr_diagnostics_attr, | |
2437 | &ipr_ioa_reset_attr, | |
2438 | &ipr_update_fw_attr, | |
2439 | NULL, | |
2440 | }; | |
2441 | ||
2442 | #ifdef CONFIG_SCSI_IPR_DUMP | |
2443 | /** | |
2444 | * ipr_read_dump - Dump the adapter | |
2445 | * @kobj: kobject struct | |
2446 | * @buf: buffer | |
2447 | * @off: offset | |
2448 | * @count: buffer size | |
2449 | * | |
2450 | * Return value: | |
2451 | * number of bytes printed to buffer | |
2452 | **/ | |
2453 | static ssize_t ipr_read_dump(struct kobject *kobj, char *buf, | |
2454 | loff_t off, size_t count) | |
2455 | { | |
2456 | struct class_device *cdev = container_of(kobj,struct class_device,kobj); | |
2457 | struct Scsi_Host *shost = class_to_shost(cdev); | |
2458 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
2459 | struct ipr_dump *dump; | |
2460 | unsigned long lock_flags = 0; | |
2461 | char *src; | |
2462 | int len; | |
2463 | size_t rc = count; | |
2464 | ||
2465 | if (!capable(CAP_SYS_ADMIN)) | |
2466 | return -EACCES; | |
2467 | ||
2468 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2469 | dump = ioa_cfg->dump; | |
2470 | ||
2471 | if (ioa_cfg->sdt_state != DUMP_OBTAINED || !dump) { | |
2472 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2473 | return 0; | |
2474 | } | |
2475 | kref_get(&dump->kref); | |
2476 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2477 | ||
2478 | if (off > dump->driver_dump.hdr.len) { | |
2479 | kref_put(&dump->kref, ipr_release_dump); | |
2480 | return 0; | |
2481 | } | |
2482 | ||
2483 | if (off + count > dump->driver_dump.hdr.len) { | |
2484 | count = dump->driver_dump.hdr.len - off; | |
2485 | rc = count; | |
2486 | } | |
2487 | ||
2488 | if (count && off < sizeof(dump->driver_dump)) { | |
2489 | if (off + count > sizeof(dump->driver_dump)) | |
2490 | len = sizeof(dump->driver_dump) - off; | |
2491 | else | |
2492 | len = count; | |
2493 | src = (u8 *)&dump->driver_dump + off; | |
2494 | memcpy(buf, src, len); | |
2495 | buf += len; | |
2496 | off += len; | |
2497 | count -= len; | |
2498 | } | |
2499 | ||
2500 | off -= sizeof(dump->driver_dump); | |
2501 | ||
2502 | if (count && off < offsetof(struct ipr_ioa_dump, ioa_data)) { | |
2503 | if (off + count > offsetof(struct ipr_ioa_dump, ioa_data)) | |
2504 | len = offsetof(struct ipr_ioa_dump, ioa_data) - off; | |
2505 | else | |
2506 | len = count; | |
2507 | src = (u8 *)&dump->ioa_dump + off; | |
2508 | memcpy(buf, src, len); | |
2509 | buf += len; | |
2510 | off += len; | |
2511 | count -= len; | |
2512 | } | |
2513 | ||
2514 | off -= offsetof(struct ipr_ioa_dump, ioa_data); | |
2515 | ||
2516 | while (count) { | |
2517 | if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK)) | |
2518 | len = PAGE_ALIGN(off) - off; | |
2519 | else | |
2520 | len = count; | |
2521 | src = (u8 *)dump->ioa_dump.ioa_data[(off & PAGE_MASK) >> PAGE_SHIFT]; | |
2522 | src += off & ~PAGE_MASK; | |
2523 | memcpy(buf, src, len); | |
2524 | buf += len; | |
2525 | off += len; | |
2526 | count -= len; | |
2527 | } | |
2528 | ||
2529 | kref_put(&dump->kref, ipr_release_dump); | |
2530 | return rc; | |
2531 | } | |
2532 | ||
2533 | /** | |
2534 | * ipr_alloc_dump - Prepare for adapter dump | |
2535 | * @ioa_cfg: ioa config struct | |
2536 | * | |
2537 | * Return value: | |
2538 | * 0 on success / other on failure | |
2539 | **/ | |
2540 | static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg) | |
2541 | { | |
2542 | struct ipr_dump *dump; | |
2543 | unsigned long lock_flags = 0; | |
2544 | ||
2545 | ENTER; | |
2546 | dump = kmalloc(sizeof(struct ipr_dump), GFP_KERNEL); | |
2547 | ||
2548 | if (!dump) { | |
2549 | ipr_err("Dump memory allocation failed\n"); | |
2550 | return -ENOMEM; | |
2551 | } | |
2552 | ||
2553 | memset(dump, 0, sizeof(struct ipr_dump)); | |
2554 | kref_init(&dump->kref); | |
2555 | dump->ioa_cfg = ioa_cfg; | |
2556 | ||
2557 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2558 | ||
2559 | if (INACTIVE != ioa_cfg->sdt_state) { | |
2560 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2561 | kfree(dump); | |
2562 | return 0; | |
2563 | } | |
2564 | ||
2565 | ioa_cfg->dump = dump; | |
2566 | ioa_cfg->sdt_state = WAIT_FOR_DUMP; | |
2567 | if (ioa_cfg->ioa_is_dead && !ioa_cfg->dump_taken) { | |
2568 | ioa_cfg->dump_taken = 1; | |
2569 | schedule_work(&ioa_cfg->work_q); | |
2570 | } | |
2571 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2572 | ||
2573 | LEAVE; | |
2574 | return 0; | |
2575 | } | |
2576 | ||
2577 | /** | |
2578 | * ipr_free_dump - Free adapter dump memory | |
2579 | * @ioa_cfg: ioa config struct | |
2580 | * | |
2581 | * Return value: | |
2582 | * 0 on success / other on failure | |
2583 | **/ | |
2584 | static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) | |
2585 | { | |
2586 | struct ipr_dump *dump; | |
2587 | unsigned long lock_flags = 0; | |
2588 | ||
2589 | ENTER; | |
2590 | ||
2591 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2592 | dump = ioa_cfg->dump; | |
2593 | if (!dump) { | |
2594 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2595 | return 0; | |
2596 | } | |
2597 | ||
2598 | ioa_cfg->dump = NULL; | |
2599 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2600 | ||
2601 | kref_put(&dump->kref, ipr_release_dump); | |
2602 | ||
2603 | LEAVE; | |
2604 | return 0; | |
2605 | } | |
2606 | ||
2607 | /** | |
2608 | * ipr_write_dump - Setup dump state of adapter | |
2609 | * @kobj: kobject struct | |
2610 | * @buf: buffer | |
2611 | * @off: offset | |
2612 | * @count: buffer size | |
2613 | * | |
2614 | * Return value: | |
2615 | * number of bytes printed to buffer | |
2616 | **/ | |
2617 | static ssize_t ipr_write_dump(struct kobject *kobj, char *buf, | |
2618 | loff_t off, size_t count) | |
2619 | { | |
2620 | struct class_device *cdev = container_of(kobj,struct class_device,kobj); | |
2621 | struct Scsi_Host *shost = class_to_shost(cdev); | |
2622 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | |
2623 | int rc; | |
2624 | ||
2625 | if (!capable(CAP_SYS_ADMIN)) | |
2626 | return -EACCES; | |
2627 | ||
2628 | if (buf[0] == '1') | |
2629 | rc = ipr_alloc_dump(ioa_cfg); | |
2630 | else if (buf[0] == '0') | |
2631 | rc = ipr_free_dump(ioa_cfg); | |
2632 | else | |
2633 | return -EINVAL; | |
2634 | ||
2635 | if (rc) | |
2636 | return rc; | |
2637 | else | |
2638 | return count; | |
2639 | } | |
2640 | ||
2641 | static struct bin_attribute ipr_dump_attr = { | |
2642 | .attr = { | |
2643 | .name = "dump", | |
2644 | .mode = S_IRUSR | S_IWUSR, | |
2645 | }, | |
2646 | .size = 0, | |
2647 | .read = ipr_read_dump, | |
2648 | .write = ipr_write_dump | |
2649 | }; | |
2650 | #else | |
2651 | static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) { return 0; }; | |
2652 | #endif | |
2653 | ||
2654 | /** | |
2655 | * ipr_change_queue_depth - Change the device's queue depth | |
2656 | * @sdev: scsi device struct | |
2657 | * @qdepth: depth to set | |
2658 | * | |
2659 | * Return value: | |
2660 | * actual depth set | |
2661 | **/ | |
2662 | static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth) | |
2663 | { | |
2664 | scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); | |
2665 | return sdev->queue_depth; | |
2666 | } | |
2667 | ||
2668 | /** | |
2669 | * ipr_change_queue_type - Change the device's queue type | |
2670 | * @dsev: scsi device struct | |
2671 | * @tag_type: type of tags to use | |
2672 | * | |
2673 | * Return value: | |
2674 | * actual queue type set | |
2675 | **/ | |
2676 | static int ipr_change_queue_type(struct scsi_device *sdev, int tag_type) | |
2677 | { | |
2678 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | |
2679 | struct ipr_resource_entry *res; | |
2680 | unsigned long lock_flags = 0; | |
2681 | ||
2682 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2683 | res = (struct ipr_resource_entry *)sdev->hostdata; | |
2684 | ||
2685 | if (res) { | |
2686 | if (ipr_is_gscsi(res) && sdev->tagged_supported) { | |
2687 | /* | |
2688 | * We don't bother quiescing the device here since the | |
2689 | * adapter firmware does it for us. | |
2690 | */ | |
2691 | scsi_set_tag_type(sdev, tag_type); | |
2692 | ||
2693 | if (tag_type) | |
2694 | scsi_activate_tcq(sdev, sdev->queue_depth); | |
2695 | else | |
2696 | scsi_deactivate_tcq(sdev, sdev->queue_depth); | |
2697 | } else | |
2698 | tag_type = 0; | |
2699 | } else | |
2700 | tag_type = 0; | |
2701 | ||
2702 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2703 | return tag_type; | |
2704 | } | |
2705 | ||
2706 | /** | |
2707 | * ipr_show_adapter_handle - Show the adapter's resource handle for this device | |
2708 | * @dev: device struct | |
2709 | * @buf: buffer | |
2710 | * | |
2711 | * Return value: | |
2712 | * number of bytes printed to buffer | |
2713 | **/ | |
10523b3b | 2714 | static ssize_t ipr_show_adapter_handle(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
2715 | { |
2716 | struct scsi_device *sdev = to_scsi_device(dev); | |
2717 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | |
2718 | struct ipr_resource_entry *res; | |
2719 | unsigned long lock_flags = 0; | |
2720 | ssize_t len = -ENXIO; | |
2721 | ||
2722 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2723 | res = (struct ipr_resource_entry *)sdev->hostdata; | |
2724 | if (res) | |
2725 | len = snprintf(buf, PAGE_SIZE, "%08X\n", res->cfgte.res_handle); | |
2726 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2727 | return len; | |
2728 | } | |
2729 | ||
2730 | static struct device_attribute ipr_adapter_handle_attr = { | |
2731 | .attr = { | |
2732 | .name = "adapter_handle", | |
2733 | .mode = S_IRUSR, | |
2734 | }, | |
2735 | .show = ipr_show_adapter_handle | |
2736 | }; | |
2737 | ||
2738 | static struct device_attribute *ipr_dev_attrs[] = { | |
2739 | &ipr_adapter_handle_attr, | |
2740 | NULL, | |
2741 | }; | |
2742 | ||
2743 | /** | |
2744 | * ipr_biosparam - Return the HSC mapping | |
2745 | * @sdev: scsi device struct | |
2746 | * @block_device: block device pointer | |
2747 | * @capacity: capacity of the device | |
2748 | * @parm: Array containing returned HSC values. | |
2749 | * | |
2750 | * This function generates the HSC parms that fdisk uses. | |
2751 | * We want to make sure we return something that places partitions | |
2752 | * on 4k boundaries for best performance with the IOA. | |
2753 | * | |
2754 | * Return value: | |
2755 | * 0 on success | |
2756 | **/ | |
2757 | static int ipr_biosparam(struct scsi_device *sdev, | |
2758 | struct block_device *block_device, | |
2759 | sector_t capacity, int *parm) | |
2760 | { | |
2761 | int heads, sectors; | |
2762 | sector_t cylinders; | |
2763 | ||
2764 | heads = 128; | |
2765 | sectors = 32; | |
2766 | ||
2767 | cylinders = capacity; | |
2768 | sector_div(cylinders, (128 * 32)); | |
2769 | ||
2770 | /* return result */ | |
2771 | parm[0] = heads; | |
2772 | parm[1] = sectors; | |
2773 | parm[2] = cylinders; | |
2774 | ||
2775 | return 0; | |
2776 | } | |
2777 | ||
2778 | /** | |
2779 | * ipr_slave_destroy - Unconfigure a SCSI device | |
2780 | * @sdev: scsi device struct | |
2781 | * | |
2782 | * Return value: | |
2783 | * nothing | |
2784 | **/ | |
2785 | static void ipr_slave_destroy(struct scsi_device *sdev) | |
2786 | { | |
2787 | struct ipr_resource_entry *res; | |
2788 | struct ipr_ioa_cfg *ioa_cfg; | |
2789 | unsigned long lock_flags = 0; | |
2790 | ||
2791 | ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; | |
2792 | ||
2793 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2794 | res = (struct ipr_resource_entry *) sdev->hostdata; | |
2795 | if (res) { | |
2796 | sdev->hostdata = NULL; | |
2797 | res->sdev = NULL; | |
2798 | } | |
2799 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2800 | } | |
2801 | ||
2802 | /** | |
2803 | * ipr_slave_configure - Configure a SCSI device | |
2804 | * @sdev: scsi device struct | |
2805 | * | |
2806 | * This function configures the specified scsi device. | |
2807 | * | |
2808 | * Return value: | |
2809 | * 0 on success | |
2810 | **/ | |
2811 | static int ipr_slave_configure(struct scsi_device *sdev) | |
2812 | { | |
2813 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; | |
2814 | struct ipr_resource_entry *res; | |
2815 | unsigned long lock_flags = 0; | |
2816 | ||
2817 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2818 | res = sdev->hostdata; | |
2819 | if (res) { | |
2820 | if (ipr_is_af_dasd_device(res)) | |
2821 | sdev->type = TYPE_RAID; | |
2822 | if (ipr_is_af_dasd_device(res) || ipr_is_ioa_resource(res)) | |
2823 | sdev->scsi_level = 4; | |
2824 | if (ipr_is_vset_device(res)) { | |
2825 | sdev->timeout = IPR_VSET_RW_TIMEOUT; | |
2826 | blk_queue_max_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS); | |
2827 | } | |
2828 | if (IPR_IS_DASD_DEVICE(res->cfgte.std_inq_data)) | |
2829 | sdev->allow_restart = 1; | |
2830 | scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); | |
2831 | } | |
2832 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2833 | return 0; | |
2834 | } | |
2835 | ||
2836 | /** | |
2837 | * ipr_slave_alloc - Prepare for commands to a device. | |
2838 | * @sdev: scsi device struct | |
2839 | * | |
2840 | * This function saves a pointer to the resource entry | |
2841 | * in the scsi device struct if the device exists. We | |
2842 | * can then use this pointer in ipr_queuecommand when | |
2843 | * handling new commands. | |
2844 | * | |
2845 | * Return value: | |
2846 | * 0 on success | |
2847 | **/ | |
2848 | static int ipr_slave_alloc(struct scsi_device *sdev) | |
2849 | { | |
2850 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; | |
2851 | struct ipr_resource_entry *res; | |
2852 | unsigned long lock_flags; | |
2853 | ||
2854 | sdev->hostdata = NULL; | |
2855 | ||
2856 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
2857 | ||
2858 | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | |
2859 | if ((res->cfgte.res_addr.bus == sdev->channel) && | |
2860 | (res->cfgte.res_addr.target == sdev->id) && | |
2861 | (res->cfgte.res_addr.lun == sdev->lun)) { | |
2862 | res->sdev = sdev; | |
2863 | res->add_to_ml = 0; | |
2864 | res->in_erp = 0; | |
2865 | sdev->hostdata = res; | |
2866 | res->needs_sync_complete = 1; | |
2867 | break; | |
2868 | } | |
2869 | } | |
2870 | ||
2871 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
2872 | ||
2873 | return 0; | |
2874 | } | |
2875 | ||
2876 | /** | |
2877 | * ipr_eh_host_reset - Reset the host adapter | |
2878 | * @scsi_cmd: scsi command struct | |
2879 | * | |
2880 | * Return value: | |
2881 | * SUCCESS / FAILED | |
2882 | **/ | |
df0ae249 | 2883 | static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd) |
1da177e4 LT |
2884 | { |
2885 | struct ipr_ioa_cfg *ioa_cfg; | |
2886 | int rc; | |
2887 | ||
2888 | ENTER; | |
2889 | ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata; | |
2890 | ||
2891 | dev_err(&ioa_cfg->pdev->dev, | |
2892 | "Adapter being reset as a result of error recovery.\n"); | |
2893 | ||
2894 | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | |
2895 | ioa_cfg->sdt_state = GET_DUMP; | |
2896 | ||
2897 | rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV); | |
2898 | ||
2899 | LEAVE; | |
2900 | return rc; | |
2901 | } | |
2902 | ||
df0ae249 JG |
2903 | static int ipr_eh_host_reset(struct scsi_cmnd * cmd) |
2904 | { | |
2905 | int rc; | |
2906 | ||
2907 | spin_lock_irq(cmd->device->host->host_lock); | |
2908 | rc = __ipr_eh_host_reset(cmd); | |
2909 | spin_unlock_irq(cmd->device->host->host_lock); | |
2910 | ||
2911 | return rc; | |
2912 | } | |
2913 | ||
1da177e4 LT |
2914 | /** |
2915 | * ipr_eh_dev_reset - Reset the device | |
2916 | * @scsi_cmd: scsi command struct | |
2917 | * | |
2918 | * This function issues a device reset to the affected device. | |
2919 | * A LUN reset will be sent to the device first. If that does | |
2920 | * not work, a target reset will be sent. | |
2921 | * | |
2922 | * Return value: | |
2923 | * SUCCESS / FAILED | |
2924 | **/ | |
94d0e7b8 | 2925 | static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd) |
1da177e4 LT |
2926 | { |
2927 | struct ipr_cmnd *ipr_cmd; | |
2928 | struct ipr_ioa_cfg *ioa_cfg; | |
2929 | struct ipr_resource_entry *res; | |
2930 | struct ipr_cmd_pkt *cmd_pkt; | |
2931 | u32 ioasc; | |
2932 | ||
2933 | ENTER; | |
2934 | ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata; | |
2935 | res = scsi_cmd->device->hostdata; | |
2936 | ||
2937 | if (!res || (!ipr_is_gscsi(res) && !ipr_is_vset_device(res))) | |
2938 | return FAILED; | |
2939 | ||
2940 | /* | |
2941 | * If we are currently going through reset/reload, return failed. This will force the | |
2942 | * mid-layer to call ipr_eh_host_reset, which will then go to sleep and wait for the | |
2943 | * reset to complete | |
2944 | */ | |
2945 | if (ioa_cfg->in_reset_reload) | |
2946 | return FAILED; | |
2947 | if (ioa_cfg->ioa_is_dead) | |
2948 | return FAILED; | |
2949 | ||
2950 | list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) { | |
2951 | if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) { | |
2952 | if (ipr_cmd->scsi_cmd) | |
2953 | ipr_cmd->done = ipr_scsi_eh_done; | |
2954 | } | |
2955 | } | |
2956 | ||
2957 | res->resetting_device = 1; | |
2958 | ||
2959 | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | |
2960 | ||
2961 | ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle; | |
2962 | cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt; | |
2963 | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | |
2964 | cmd_pkt->cdb[0] = IPR_RESET_DEVICE; | |
2965 | ||
2966 | ipr_sdev_err(scsi_cmd->device, "Resetting device\n"); | |
2967 | ipr_send_blocking_cmd(ipr_cmd, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT); | |
2968 | ||
2969 | ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
2970 | ||
2971 | res->resetting_device = 0; | |
2972 | ||
2973 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
2974 | ||
2975 | LEAVE; | |
2976 | return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS); | |
2977 | } | |
2978 | ||
94d0e7b8 JG |
2979 | static int ipr_eh_dev_reset(struct scsi_cmnd * cmd) |
2980 | { | |
2981 | int rc; | |
2982 | ||
2983 | spin_lock_irq(cmd->device->host->host_lock); | |
2984 | rc = __ipr_eh_dev_reset(cmd); | |
2985 | spin_unlock_irq(cmd->device->host->host_lock); | |
2986 | ||
2987 | return rc; | |
2988 | } | |
2989 | ||
1da177e4 LT |
2990 | /** |
2991 | * ipr_bus_reset_done - Op done function for bus reset. | |
2992 | * @ipr_cmd: ipr command struct | |
2993 | * | |
2994 | * This function is the op done function for a bus reset | |
2995 | * | |
2996 | * Return value: | |
2997 | * none | |
2998 | **/ | |
2999 | static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd) | |
3000 | { | |
3001 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
3002 | struct ipr_resource_entry *res; | |
3003 | ||
3004 | ENTER; | |
3005 | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | |
3006 | if (!memcmp(&res->cfgte.res_handle, &ipr_cmd->ioarcb.res_handle, | |
3007 | sizeof(res->cfgte.res_handle))) { | |
3008 | scsi_report_bus_reset(ioa_cfg->host, res->cfgte.res_addr.bus); | |
3009 | break; | |
3010 | } | |
3011 | } | |
3012 | ||
3013 | /* | |
3014 | * If abort has not completed, indicate the reset has, else call the | |
3015 | * abort's done function to wake the sleeping eh thread | |
3016 | */ | |
3017 | if (ipr_cmd->sibling->sibling) | |
3018 | ipr_cmd->sibling->sibling = NULL; | |
3019 | else | |
3020 | ipr_cmd->sibling->done(ipr_cmd->sibling); | |
3021 | ||
3022 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
3023 | LEAVE; | |
3024 | } | |
3025 | ||
3026 | /** | |
3027 | * ipr_abort_timeout - An abort task has timed out | |
3028 | * @ipr_cmd: ipr command struct | |
3029 | * | |
3030 | * This function handles when an abort task times out. If this | |
3031 | * happens we issue a bus reset since we have resources tied | |
3032 | * up that must be freed before returning to the midlayer. | |
3033 | * | |
3034 | * Return value: | |
3035 | * none | |
3036 | **/ | |
3037 | static void ipr_abort_timeout(struct ipr_cmnd *ipr_cmd) | |
3038 | { | |
3039 | struct ipr_cmnd *reset_cmd; | |
3040 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
3041 | struct ipr_cmd_pkt *cmd_pkt; | |
3042 | unsigned long lock_flags = 0; | |
3043 | ||
3044 | ENTER; | |
3045 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
3046 | if (ipr_cmd->completion.done || ioa_cfg->in_reset_reload) { | |
3047 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
3048 | return; | |
3049 | } | |
3050 | ||
3051 | ipr_sdev_err(ipr_cmd->u.sdev, "Abort timed out. Resetting bus\n"); | |
3052 | reset_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | |
3053 | ipr_cmd->sibling = reset_cmd; | |
3054 | reset_cmd->sibling = ipr_cmd; | |
3055 | reset_cmd->ioarcb.res_handle = ipr_cmd->ioarcb.res_handle; | |
3056 | cmd_pkt = &reset_cmd->ioarcb.cmd_pkt; | |
3057 | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | |
3058 | cmd_pkt->cdb[0] = IPR_RESET_DEVICE; | |
3059 | cmd_pkt->cdb[2] = IPR_RESET_TYPE_SELECT | IPR_BUS_RESET; | |
3060 | ||
3061 | ipr_do_req(reset_cmd, ipr_bus_reset_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT); | |
3062 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
3063 | LEAVE; | |
3064 | } | |
3065 | ||
3066 | /** | |
3067 | * ipr_cancel_op - Cancel specified op | |
3068 | * @scsi_cmd: scsi command struct | |
3069 | * | |
3070 | * This function cancels specified op. | |
3071 | * | |
3072 | * Return value: | |
3073 | * SUCCESS / FAILED | |
3074 | **/ | |
3075 | static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) | |
3076 | { | |
3077 | struct ipr_cmnd *ipr_cmd; | |
3078 | struct ipr_ioa_cfg *ioa_cfg; | |
3079 | struct ipr_resource_entry *res; | |
3080 | struct ipr_cmd_pkt *cmd_pkt; | |
3081 | u32 ioasc; | |
3082 | int op_found = 0; | |
3083 | ||
3084 | ENTER; | |
3085 | ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata; | |
3086 | res = scsi_cmd->device->hostdata; | |
3087 | ||
8fa728a2 JG |
3088 | /* If we are currently going through reset/reload, return failed. |
3089 | * This will force the mid-layer to call ipr_eh_host_reset, | |
3090 | * which will then go to sleep and wait for the reset to complete | |
3091 | */ | |
3092 | if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead) | |
3093 | return FAILED; | |
1da177e4 LT |
3094 | if (!res || (!ipr_is_gscsi(res) && !ipr_is_vset_device(res))) |
3095 | return FAILED; | |
3096 | ||
3097 | list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) { | |
3098 | if (ipr_cmd->scsi_cmd == scsi_cmd) { | |
3099 | ipr_cmd->done = ipr_scsi_eh_done; | |
3100 | op_found = 1; | |
3101 | break; | |
3102 | } | |
3103 | } | |
3104 | ||
3105 | if (!op_found) | |
3106 | return SUCCESS; | |
3107 | ||
3108 | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | |
3109 | ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle; | |
3110 | cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt; | |
3111 | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | |
3112 | cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS; | |
3113 | ipr_cmd->u.sdev = scsi_cmd->device; | |
3114 | ||
3115 | ipr_sdev_err(scsi_cmd->device, "Aborting command: %02X\n", scsi_cmd->cmnd[0]); | |
3116 | ipr_send_blocking_cmd(ipr_cmd, ipr_abort_timeout, IPR_CANCEL_ALL_TIMEOUT); | |
3117 | ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
3118 | ||
3119 | /* | |
3120 | * If the abort task timed out and we sent a bus reset, we will get | |
3121 | * one the following responses to the abort | |
3122 | */ | |
3123 | if (ioasc == IPR_IOASC_BUS_WAS_RESET || ioasc == IPR_IOASC_SYNC_REQUIRED) { | |
3124 | ioasc = 0; | |
3125 | ipr_trace; | |
3126 | } | |
3127 | ||
3128 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
3129 | res->needs_sync_complete = 1; | |
3130 | ||
3131 | LEAVE; | |
3132 | return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS); | |
3133 | } | |
3134 | ||
3135 | /** | |
3136 | * ipr_eh_abort - Abort a single op | |
3137 | * @scsi_cmd: scsi command struct | |
3138 | * | |
3139 | * Return value: | |
3140 | * SUCCESS / FAILED | |
3141 | **/ | |
3142 | static int ipr_eh_abort(struct scsi_cmnd * scsi_cmd) | |
3143 | { | |
8fa728a2 JG |
3144 | unsigned long flags; |
3145 | int rc; | |
1da177e4 LT |
3146 | |
3147 | ENTER; | |
1da177e4 | 3148 | |
8fa728a2 JG |
3149 | spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags); |
3150 | rc = ipr_cancel_op(scsi_cmd); | |
3151 | spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags); | |
1da177e4 LT |
3152 | |
3153 | LEAVE; | |
8fa728a2 | 3154 | return rc; |
1da177e4 LT |
3155 | } |
3156 | ||
3157 | /** | |
3158 | * ipr_handle_other_interrupt - Handle "other" interrupts | |
3159 | * @ioa_cfg: ioa config struct | |
3160 | * @int_reg: interrupt register | |
3161 | * | |
3162 | * Return value: | |
3163 | * IRQ_NONE / IRQ_HANDLED | |
3164 | **/ | |
3165 | static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg, | |
3166 | volatile u32 int_reg) | |
3167 | { | |
3168 | irqreturn_t rc = IRQ_HANDLED; | |
3169 | ||
3170 | if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) { | |
3171 | /* Mask the interrupt */ | |
3172 | writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.set_interrupt_mask_reg); | |
3173 | ||
3174 | /* Clear the interrupt */ | |
3175 | writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.clr_interrupt_reg); | |
3176 | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | |
3177 | ||
3178 | list_del(&ioa_cfg->reset_cmd->queue); | |
3179 | del_timer(&ioa_cfg->reset_cmd->timer); | |
3180 | ipr_reset_ioa_job(ioa_cfg->reset_cmd); | |
3181 | } else { | |
3182 | if (int_reg & IPR_PCII_IOA_UNIT_CHECKED) | |
3183 | ioa_cfg->ioa_unit_checked = 1; | |
3184 | else | |
3185 | dev_err(&ioa_cfg->pdev->dev, | |
3186 | "Permanent IOA failure. 0x%08X\n", int_reg); | |
3187 | ||
3188 | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | |
3189 | ioa_cfg->sdt_state = GET_DUMP; | |
3190 | ||
3191 | ipr_mask_and_clear_interrupts(ioa_cfg, ~0); | |
3192 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | |
3193 | } | |
3194 | ||
3195 | return rc; | |
3196 | } | |
3197 | ||
3198 | /** | |
3199 | * ipr_isr - Interrupt service routine | |
3200 | * @irq: irq number | |
3201 | * @devp: pointer to ioa config struct | |
3202 | * @regs: pt_regs struct | |
3203 | * | |
3204 | * Return value: | |
3205 | * IRQ_NONE / IRQ_HANDLED | |
3206 | **/ | |
3207 | static irqreturn_t ipr_isr(int irq, void *devp, struct pt_regs *regs) | |
3208 | { | |
3209 | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp; | |
3210 | unsigned long lock_flags = 0; | |
3211 | volatile u32 int_reg, int_mask_reg; | |
3212 | u32 ioasc; | |
3213 | u16 cmd_index; | |
3214 | struct ipr_cmnd *ipr_cmd; | |
3215 | irqreturn_t rc = IRQ_NONE; | |
3216 | ||
3217 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
3218 | ||
3219 | /* If interrupts are disabled, ignore the interrupt */ | |
3220 | if (!ioa_cfg->allow_interrupts) { | |
3221 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
3222 | return IRQ_NONE; | |
3223 | } | |
3224 | ||
3225 | int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | |
3226 | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; | |
3227 | ||
3228 | /* If an interrupt on the adapter did not occur, ignore it */ | |
3229 | if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) { | |
3230 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
3231 | return IRQ_NONE; | |
3232 | } | |
3233 | ||
3234 | while (1) { | |
3235 | ipr_cmd = NULL; | |
3236 | ||
3237 | while ((be32_to_cpu(*ioa_cfg->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) == | |
3238 | ioa_cfg->toggle_bit) { | |
3239 | ||
3240 | cmd_index = (be32_to_cpu(*ioa_cfg->hrrq_curr) & | |
3241 | IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT; | |
3242 | ||
3243 | if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) { | |
3244 | ioa_cfg->errors_logged++; | |
3245 | dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n"); | |
3246 | ||
3247 | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | |
3248 | ioa_cfg->sdt_state = GET_DUMP; | |
3249 | ||
3250 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | |
3251 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
3252 | return IRQ_HANDLED; | |
3253 | } | |
3254 | ||
3255 | ipr_cmd = ioa_cfg->ipr_cmnd_list[cmd_index]; | |
3256 | ||
3257 | ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
3258 | ||
3259 | ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, ioasc); | |
3260 | ||
3261 | list_del(&ipr_cmd->queue); | |
3262 | del_timer(&ipr_cmd->timer); | |
3263 | ipr_cmd->done(ipr_cmd); | |
3264 | ||
3265 | rc = IRQ_HANDLED; | |
3266 | ||
3267 | if (ioa_cfg->hrrq_curr < ioa_cfg->hrrq_end) { | |
3268 | ioa_cfg->hrrq_curr++; | |
3269 | } else { | |
3270 | ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start; | |
3271 | ioa_cfg->toggle_bit ^= 1u; | |
3272 | } | |
3273 | } | |
3274 | ||
3275 | if (ipr_cmd != NULL) { | |
3276 | /* Clear the PCI interrupt */ | |
3277 | writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg); | |
3278 | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; | |
3279 | } else | |
3280 | break; | |
3281 | } | |
3282 | ||
3283 | if (unlikely(rc == IRQ_NONE)) | |
3284 | rc = ipr_handle_other_interrupt(ioa_cfg, int_reg); | |
3285 | ||
3286 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
3287 | return rc; | |
3288 | } | |
3289 | ||
3290 | /** | |
3291 | * ipr_build_ioadl - Build a scatter/gather list and map the buffer | |
3292 | * @ioa_cfg: ioa config struct | |
3293 | * @ipr_cmd: ipr command struct | |
3294 | * | |
3295 | * Return value: | |
3296 | * 0 on success / -1 on failure | |
3297 | **/ | |
3298 | static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg, | |
3299 | struct ipr_cmnd *ipr_cmd) | |
3300 | { | |
3301 | int i; | |
3302 | struct scatterlist *sglist; | |
3303 | u32 length; | |
3304 | u32 ioadl_flags = 0; | |
3305 | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | |
3306 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
3307 | struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; | |
3308 | ||
3309 | length = scsi_cmd->request_bufflen; | |
3310 | ||
3311 | if (length == 0) | |
3312 | return 0; | |
3313 | ||
3314 | if (scsi_cmd->use_sg) { | |
3315 | ipr_cmd->dma_use_sg = pci_map_sg(ioa_cfg->pdev, | |
3316 | scsi_cmd->request_buffer, | |
3317 | scsi_cmd->use_sg, | |
3318 | scsi_cmd->sc_data_direction); | |
3319 | ||
3320 | if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) { | |
3321 | ioadl_flags = IPR_IOADL_FLAGS_WRITE; | |
3322 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | |
3323 | ioarcb->write_data_transfer_length = cpu_to_be32(length); | |
3324 | ioarcb->write_ioadl_len = | |
3325 | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | |
3326 | } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) { | |
3327 | ioadl_flags = IPR_IOADL_FLAGS_READ; | |
3328 | ioarcb->read_data_transfer_length = cpu_to_be32(length); | |
3329 | ioarcb->read_ioadl_len = | |
3330 | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | |
3331 | } | |
3332 | ||
3333 | sglist = scsi_cmd->request_buffer; | |
3334 | ||
3335 | for (i = 0; i < ipr_cmd->dma_use_sg; i++) { | |
3336 | ioadl[i].flags_and_data_len = | |
3337 | cpu_to_be32(ioadl_flags | sg_dma_len(&sglist[i])); | |
3338 | ioadl[i].address = | |
3339 | cpu_to_be32(sg_dma_address(&sglist[i])); | |
3340 | } | |
3341 | ||
3342 | if (likely(ipr_cmd->dma_use_sg)) { | |
3343 | ioadl[i-1].flags_and_data_len |= | |
3344 | cpu_to_be32(IPR_IOADL_FLAGS_LAST); | |
3345 | return 0; | |
3346 | } else | |
3347 | dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n"); | |
3348 | } else { | |
3349 | if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) { | |
3350 | ioadl_flags = IPR_IOADL_FLAGS_WRITE; | |
3351 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | |
3352 | ioarcb->write_data_transfer_length = cpu_to_be32(length); | |
3353 | ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
3354 | } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) { | |
3355 | ioadl_flags = IPR_IOADL_FLAGS_READ; | |
3356 | ioarcb->read_data_transfer_length = cpu_to_be32(length); | |
3357 | ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
3358 | } | |
3359 | ||
3360 | ipr_cmd->dma_handle = pci_map_single(ioa_cfg->pdev, | |
3361 | scsi_cmd->request_buffer, length, | |
3362 | scsi_cmd->sc_data_direction); | |
3363 | ||
3364 | if (likely(!pci_dma_mapping_error(ipr_cmd->dma_handle))) { | |
3365 | ipr_cmd->dma_use_sg = 1; | |
3366 | ioadl[0].flags_and_data_len = | |
3367 | cpu_to_be32(ioadl_flags | length | IPR_IOADL_FLAGS_LAST); | |
3368 | ioadl[0].address = cpu_to_be32(ipr_cmd->dma_handle); | |
3369 | return 0; | |
3370 | } else | |
3371 | dev_err(&ioa_cfg->pdev->dev, "pci_map_single failed!\n"); | |
3372 | } | |
3373 | ||
3374 | return -1; | |
3375 | } | |
3376 | ||
3377 | /** | |
3378 | * ipr_get_task_attributes - Translate SPI Q-Tag to task attributes | |
3379 | * @scsi_cmd: scsi command struct | |
3380 | * | |
3381 | * Return value: | |
3382 | * task attributes | |
3383 | **/ | |
3384 | static u8 ipr_get_task_attributes(struct scsi_cmnd *scsi_cmd) | |
3385 | { | |
3386 | u8 tag[2]; | |
3387 | u8 rc = IPR_FLAGS_LO_UNTAGGED_TASK; | |
3388 | ||
3389 | if (scsi_populate_tag_msg(scsi_cmd, tag)) { | |
3390 | switch (tag[0]) { | |
3391 | case MSG_SIMPLE_TAG: | |
3392 | rc = IPR_FLAGS_LO_SIMPLE_TASK; | |
3393 | break; | |
3394 | case MSG_HEAD_TAG: | |
3395 | rc = IPR_FLAGS_LO_HEAD_OF_Q_TASK; | |
3396 | break; | |
3397 | case MSG_ORDERED_TAG: | |
3398 | rc = IPR_FLAGS_LO_ORDERED_TASK; | |
3399 | break; | |
3400 | }; | |
3401 | } | |
3402 | ||
3403 | return rc; | |
3404 | } | |
3405 | ||
3406 | /** | |
3407 | * ipr_erp_done - Process completion of ERP for a device | |
3408 | * @ipr_cmd: ipr command struct | |
3409 | * | |
3410 | * This function copies the sense buffer into the scsi_cmd | |
3411 | * struct and pushes the scsi_done function. | |
3412 | * | |
3413 | * Return value: | |
3414 | * nothing | |
3415 | **/ | |
3416 | static void ipr_erp_done(struct ipr_cmnd *ipr_cmd) | |
3417 | { | |
3418 | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | |
3419 | struct ipr_resource_entry *res = scsi_cmd->device->hostdata; | |
3420 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
3421 | u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
3422 | ||
3423 | if (IPR_IOASC_SENSE_KEY(ioasc) > 0) { | |
3424 | scsi_cmd->result |= (DID_ERROR << 16); | |
3425 | ipr_sdev_err(scsi_cmd->device, | |
3426 | "Request Sense failed with IOASC: 0x%08X\n", ioasc); | |
3427 | } else { | |
3428 | memcpy(scsi_cmd->sense_buffer, ipr_cmd->sense_buffer, | |
3429 | SCSI_SENSE_BUFFERSIZE); | |
3430 | } | |
3431 | ||
3432 | if (res) { | |
3433 | res->needs_sync_complete = 1; | |
3434 | res->in_erp = 0; | |
3435 | } | |
3436 | ipr_unmap_sglist(ioa_cfg, ipr_cmd); | |
3437 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
3438 | scsi_cmd->scsi_done(scsi_cmd); | |
3439 | } | |
3440 | ||
3441 | /** | |
3442 | * ipr_reinit_ipr_cmnd_for_erp - Re-initialize a cmnd block to be used for ERP | |
3443 | * @ipr_cmd: ipr command struct | |
3444 | * | |
3445 | * Return value: | |
3446 | * none | |
3447 | **/ | |
3448 | static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd) | |
3449 | { | |
3450 | struct ipr_ioarcb *ioarcb; | |
3451 | struct ipr_ioasa *ioasa; | |
3452 | ||
3453 | ioarcb = &ipr_cmd->ioarcb; | |
3454 | ioasa = &ipr_cmd->ioasa; | |
3455 | ||
3456 | memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt)); | |
3457 | ioarcb->write_data_transfer_length = 0; | |
3458 | ioarcb->read_data_transfer_length = 0; | |
3459 | ioarcb->write_ioadl_len = 0; | |
3460 | ioarcb->read_ioadl_len = 0; | |
3461 | ioasa->ioasc = 0; | |
3462 | ioasa->residual_data_len = 0; | |
3463 | } | |
3464 | ||
3465 | /** | |
3466 | * ipr_erp_request_sense - Send request sense to a device | |
3467 | * @ipr_cmd: ipr command struct | |
3468 | * | |
3469 | * This function sends a request sense to a device as a result | |
3470 | * of a check condition. | |
3471 | * | |
3472 | * Return value: | |
3473 | * nothing | |
3474 | **/ | |
3475 | static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd) | |
3476 | { | |
3477 | struct ipr_cmd_pkt *cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt; | |
3478 | u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
3479 | ||
3480 | if (IPR_IOASC_SENSE_KEY(ioasc) > 0) { | |
3481 | ipr_erp_done(ipr_cmd); | |
3482 | return; | |
3483 | } | |
3484 | ||
3485 | ipr_reinit_ipr_cmnd_for_erp(ipr_cmd); | |
3486 | ||
3487 | cmd_pkt->request_type = IPR_RQTYPE_SCSICDB; | |
3488 | cmd_pkt->cdb[0] = REQUEST_SENSE; | |
3489 | cmd_pkt->cdb[4] = SCSI_SENSE_BUFFERSIZE; | |
3490 | cmd_pkt->flags_hi |= IPR_FLAGS_HI_SYNC_OVERRIDE; | |
3491 | cmd_pkt->flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK; | |
3492 | cmd_pkt->timeout = cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT / HZ); | |
3493 | ||
3494 | ipr_cmd->ioadl[0].flags_and_data_len = | |
3495 | cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | SCSI_SENSE_BUFFERSIZE); | |
3496 | ipr_cmd->ioadl[0].address = | |
3497 | cpu_to_be32(ipr_cmd->sense_buffer_dma); | |
3498 | ||
3499 | ipr_cmd->ioarcb.read_ioadl_len = | |
3500 | cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
3501 | ipr_cmd->ioarcb.read_data_transfer_length = | |
3502 | cpu_to_be32(SCSI_SENSE_BUFFERSIZE); | |
3503 | ||
3504 | ipr_do_req(ipr_cmd, ipr_erp_done, ipr_timeout, | |
3505 | IPR_REQUEST_SENSE_TIMEOUT * 2); | |
3506 | } | |
3507 | ||
3508 | /** | |
3509 | * ipr_erp_cancel_all - Send cancel all to a device | |
3510 | * @ipr_cmd: ipr command struct | |
3511 | * | |
3512 | * This function sends a cancel all to a device to clear the | |
3513 | * queue. If we are running TCQ on the device, QERR is set to 1, | |
3514 | * which means all outstanding ops have been dropped on the floor. | |
3515 | * Cancel all will return them to us. | |
3516 | * | |
3517 | * Return value: | |
3518 | * nothing | |
3519 | **/ | |
3520 | static void ipr_erp_cancel_all(struct ipr_cmnd *ipr_cmd) | |
3521 | { | |
3522 | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | |
3523 | struct ipr_resource_entry *res = scsi_cmd->device->hostdata; | |
3524 | struct ipr_cmd_pkt *cmd_pkt; | |
3525 | ||
3526 | res->in_erp = 1; | |
3527 | ||
3528 | ipr_reinit_ipr_cmnd_for_erp(ipr_cmd); | |
3529 | ||
3530 | if (!scsi_get_tag_type(scsi_cmd->device)) { | |
3531 | ipr_erp_request_sense(ipr_cmd); | |
3532 | return; | |
3533 | } | |
3534 | ||
3535 | cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt; | |
3536 | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | |
3537 | cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS; | |
3538 | ||
3539 | ipr_do_req(ipr_cmd, ipr_erp_request_sense, ipr_timeout, | |
3540 | IPR_CANCEL_ALL_TIMEOUT); | |
3541 | } | |
3542 | ||
3543 | /** | |
3544 | * ipr_dump_ioasa - Dump contents of IOASA | |
3545 | * @ioa_cfg: ioa config struct | |
3546 | * @ipr_cmd: ipr command struct | |
3547 | * | |
3548 | * This function is invoked by the interrupt handler when ops | |
3549 | * fail. It will log the IOASA if appropriate. Only called | |
3550 | * for GPDD ops. | |
3551 | * | |
3552 | * Return value: | |
3553 | * none | |
3554 | **/ | |
3555 | static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg, | |
3556 | struct ipr_cmnd *ipr_cmd) | |
3557 | { | |
3558 | int i; | |
3559 | u16 data_len; | |
3560 | u32 ioasc; | |
3561 | struct ipr_ioasa *ioasa = &ipr_cmd->ioasa; | |
3562 | __be32 *ioasa_data = (__be32 *)ioasa; | |
3563 | int error_index; | |
3564 | ||
3565 | ioasc = be32_to_cpu(ioasa->ioasc) & IPR_IOASC_IOASC_MASK; | |
3566 | ||
3567 | if (0 == ioasc) | |
3568 | return; | |
3569 | ||
3570 | if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL) | |
3571 | return; | |
3572 | ||
3573 | error_index = ipr_get_error(ioasc); | |
3574 | ||
3575 | if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) { | |
3576 | /* Don't log an error if the IOA already logged one */ | |
3577 | if (ioasa->ilid != 0) | |
3578 | return; | |
3579 | ||
3580 | if (ipr_error_table[error_index].log_ioasa == 0) | |
3581 | return; | |
3582 | } | |
3583 | ||
3584 | ipr_sdev_err(ipr_cmd->scsi_cmd->device, "%s\n", | |
3585 | ipr_error_table[error_index].error); | |
3586 | ||
3587 | if ((ioasa->u.gpdd.end_state <= ARRAY_SIZE(ipr_gpdd_dev_end_states)) && | |
3588 | (ioasa->u.gpdd.bus_phase <= ARRAY_SIZE(ipr_gpdd_dev_bus_phases))) { | |
3589 | ipr_sdev_err(ipr_cmd->scsi_cmd->device, | |
3590 | "Device End state: %s Phase: %s\n", | |
3591 | ipr_gpdd_dev_end_states[ioasa->u.gpdd.end_state], | |
3592 | ipr_gpdd_dev_bus_phases[ioasa->u.gpdd.bus_phase]); | |
3593 | } | |
3594 | ||
3595 | if (sizeof(struct ipr_ioasa) < be16_to_cpu(ioasa->ret_stat_len)) | |
3596 | data_len = sizeof(struct ipr_ioasa); | |
3597 | else | |
3598 | data_len = be16_to_cpu(ioasa->ret_stat_len); | |
3599 | ||
3600 | ipr_err("IOASA Dump:\n"); | |
3601 | ||
3602 | for (i = 0; i < data_len / 4; i += 4) { | |
3603 | ipr_err("%08X: %08X %08X %08X %08X\n", i*4, | |
3604 | be32_to_cpu(ioasa_data[i]), | |
3605 | be32_to_cpu(ioasa_data[i+1]), | |
3606 | be32_to_cpu(ioasa_data[i+2]), | |
3607 | be32_to_cpu(ioasa_data[i+3])); | |
3608 | } | |
3609 | } | |
3610 | ||
3611 | /** | |
3612 | * ipr_gen_sense - Generate SCSI sense data from an IOASA | |
3613 | * @ioasa: IOASA | |
3614 | * @sense_buf: sense data buffer | |
3615 | * | |
3616 | * Return value: | |
3617 | * none | |
3618 | **/ | |
3619 | static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd) | |
3620 | { | |
3621 | u32 failing_lba; | |
3622 | u8 *sense_buf = ipr_cmd->scsi_cmd->sense_buffer; | |
3623 | struct ipr_resource_entry *res = ipr_cmd->scsi_cmd->device->hostdata; | |
3624 | struct ipr_ioasa *ioasa = &ipr_cmd->ioasa; | |
3625 | u32 ioasc = be32_to_cpu(ioasa->ioasc); | |
3626 | ||
3627 | memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); | |
3628 | ||
3629 | if (ioasc >= IPR_FIRST_DRIVER_IOASC) | |
3630 | return; | |
3631 | ||
3632 | ipr_cmd->scsi_cmd->result = SAM_STAT_CHECK_CONDITION; | |
3633 | ||
3634 | if (ipr_is_vset_device(res) && | |
3635 | ioasc == IPR_IOASC_MED_DO_NOT_REALLOC && | |
3636 | ioasa->u.vset.failing_lba_hi != 0) { | |
3637 | sense_buf[0] = 0x72; | |
3638 | sense_buf[1] = IPR_IOASC_SENSE_KEY(ioasc); | |
3639 | sense_buf[2] = IPR_IOASC_SENSE_CODE(ioasc); | |
3640 | sense_buf[3] = IPR_IOASC_SENSE_QUAL(ioasc); | |
3641 | ||
3642 | sense_buf[7] = 12; | |
3643 | sense_buf[8] = 0; | |
3644 | sense_buf[9] = 0x0A; | |
3645 | sense_buf[10] = 0x80; | |
3646 | ||
3647 | failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_hi); | |
3648 | ||
3649 | sense_buf[12] = (failing_lba & 0xff000000) >> 24; | |
3650 | sense_buf[13] = (failing_lba & 0x00ff0000) >> 16; | |
3651 | sense_buf[14] = (failing_lba & 0x0000ff00) >> 8; | |
3652 | sense_buf[15] = failing_lba & 0x000000ff; | |
3653 | ||
3654 | failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo); | |
3655 | ||
3656 | sense_buf[16] = (failing_lba & 0xff000000) >> 24; | |
3657 | sense_buf[17] = (failing_lba & 0x00ff0000) >> 16; | |
3658 | sense_buf[18] = (failing_lba & 0x0000ff00) >> 8; | |
3659 | sense_buf[19] = failing_lba & 0x000000ff; | |
3660 | } else { | |
3661 | sense_buf[0] = 0x70; | |
3662 | sense_buf[2] = IPR_IOASC_SENSE_KEY(ioasc); | |
3663 | sense_buf[12] = IPR_IOASC_SENSE_CODE(ioasc); | |
3664 | sense_buf[13] = IPR_IOASC_SENSE_QUAL(ioasc); | |
3665 | ||
3666 | /* Illegal request */ | |
3667 | if ((IPR_IOASC_SENSE_KEY(ioasc) == 0x05) && | |
3668 | (be32_to_cpu(ioasa->ioasc_specific) & IPR_FIELD_POINTER_VALID)) { | |
3669 | sense_buf[7] = 10; /* additional length */ | |
3670 | ||
3671 | /* IOARCB was in error */ | |
3672 | if (IPR_IOASC_SENSE_CODE(ioasc) == 0x24) | |
3673 | sense_buf[15] = 0xC0; | |
3674 | else /* Parameter data was invalid */ | |
3675 | sense_buf[15] = 0x80; | |
3676 | ||
3677 | sense_buf[16] = | |
3678 | ((IPR_FIELD_POINTER_MASK & | |
3679 | be32_to_cpu(ioasa->ioasc_specific)) >> 8) & 0xff; | |
3680 | sense_buf[17] = | |
3681 | (IPR_FIELD_POINTER_MASK & | |
3682 | be32_to_cpu(ioasa->ioasc_specific)) & 0xff; | |
3683 | } else { | |
3684 | if (ioasc == IPR_IOASC_MED_DO_NOT_REALLOC) { | |
3685 | if (ipr_is_vset_device(res)) | |
3686 | failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo); | |
3687 | else | |
3688 | failing_lba = be32_to_cpu(ioasa->u.dasd.failing_lba); | |
3689 | ||
3690 | sense_buf[0] |= 0x80; /* Or in the Valid bit */ | |
3691 | sense_buf[3] = (failing_lba & 0xff000000) >> 24; | |
3692 | sense_buf[4] = (failing_lba & 0x00ff0000) >> 16; | |
3693 | sense_buf[5] = (failing_lba & 0x0000ff00) >> 8; | |
3694 | sense_buf[6] = failing_lba & 0x000000ff; | |
3695 | } | |
3696 | ||
3697 | sense_buf[7] = 6; /* additional length */ | |
3698 | } | |
3699 | } | |
3700 | } | |
3701 | ||
3702 | /** | |
3703 | * ipr_erp_start - Process an error response for a SCSI op | |
3704 | * @ioa_cfg: ioa config struct | |
3705 | * @ipr_cmd: ipr command struct | |
3706 | * | |
3707 | * This function determines whether or not to initiate ERP | |
3708 | * on the affected device. | |
3709 | * | |
3710 | * Return value: | |
3711 | * nothing | |
3712 | **/ | |
3713 | static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, | |
3714 | struct ipr_cmnd *ipr_cmd) | |
3715 | { | |
3716 | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | |
3717 | struct ipr_resource_entry *res = scsi_cmd->device->hostdata; | |
3718 | u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
3719 | ||
3720 | if (!res) { | |
3721 | ipr_scsi_eh_done(ipr_cmd); | |
3722 | return; | |
3723 | } | |
3724 | ||
3725 | if (ipr_is_gscsi(res)) | |
3726 | ipr_dump_ioasa(ioa_cfg, ipr_cmd); | |
3727 | else | |
3728 | ipr_gen_sense(ipr_cmd); | |
3729 | ||
3730 | switch (ioasc & IPR_IOASC_IOASC_MASK) { | |
3731 | case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST: | |
3732 | scsi_cmd->result |= (DID_IMM_RETRY << 16); | |
3733 | break; | |
3734 | case IPR_IOASC_IR_RESOURCE_HANDLE: | |
3735 | scsi_cmd->result |= (DID_NO_CONNECT << 16); | |
3736 | break; | |
3737 | case IPR_IOASC_HW_SEL_TIMEOUT: | |
3738 | scsi_cmd->result |= (DID_NO_CONNECT << 16); | |
3739 | res->needs_sync_complete = 1; | |
3740 | break; | |
3741 | case IPR_IOASC_SYNC_REQUIRED: | |
3742 | if (!res->in_erp) | |
3743 | res->needs_sync_complete = 1; | |
3744 | scsi_cmd->result |= (DID_IMM_RETRY << 16); | |
3745 | break; | |
3746 | case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */ | |
3747 | scsi_cmd->result |= (DID_PASSTHROUGH << 16); | |
3748 | break; | |
3749 | case IPR_IOASC_BUS_WAS_RESET: | |
3750 | case IPR_IOASC_BUS_WAS_RESET_BY_OTHER: | |
3751 | /* | |
3752 | * Report the bus reset and ask for a retry. The device | |
3753 | * will give CC/UA the next command. | |
3754 | */ | |
3755 | if (!res->resetting_device) | |
3756 | scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel); | |
3757 | scsi_cmd->result |= (DID_ERROR << 16); | |
3758 | res->needs_sync_complete = 1; | |
3759 | break; | |
3760 | case IPR_IOASC_HW_DEV_BUS_STATUS: | |
3761 | scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc); | |
3762 | if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) { | |
3763 | ipr_erp_cancel_all(ipr_cmd); | |
3764 | return; | |
3765 | } | |
3766 | res->needs_sync_complete = 1; | |
3767 | break; | |
3768 | case IPR_IOASC_NR_INIT_CMD_REQUIRED: | |
3769 | break; | |
3770 | default: | |
3771 | scsi_cmd->result |= (DID_ERROR << 16); | |
3772 | if (!ipr_is_vset_device(res)) | |
3773 | res->needs_sync_complete = 1; | |
3774 | break; | |
3775 | } | |
3776 | ||
3777 | ipr_unmap_sglist(ioa_cfg, ipr_cmd); | |
3778 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
3779 | scsi_cmd->scsi_done(scsi_cmd); | |
3780 | } | |
3781 | ||
3782 | /** | |
3783 | * ipr_scsi_done - mid-layer done function | |
3784 | * @ipr_cmd: ipr command struct | |
3785 | * | |
3786 | * This function is invoked by the interrupt handler for | |
3787 | * ops generated by the SCSI mid-layer | |
3788 | * | |
3789 | * Return value: | |
3790 | * none | |
3791 | **/ | |
3792 | static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd) | |
3793 | { | |
3794 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
3795 | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | |
3796 | u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
3797 | ||
3798 | scsi_cmd->resid = be32_to_cpu(ipr_cmd->ioasa.residual_data_len); | |
3799 | ||
3800 | if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) { | |
3801 | ipr_unmap_sglist(ioa_cfg, ipr_cmd); | |
3802 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
3803 | scsi_cmd->scsi_done(scsi_cmd); | |
3804 | } else | |
3805 | ipr_erp_start(ioa_cfg, ipr_cmd); | |
3806 | } | |
3807 | ||
3808 | /** | |
3809 | * ipr_save_ioafp_mode_select - Save adapters mode select data | |
3810 | * @ioa_cfg: ioa config struct | |
3811 | * @scsi_cmd: scsi command struct | |
3812 | * | |
3813 | * This function saves mode select data for the adapter to | |
3814 | * use following an adapter reset. | |
3815 | * | |
3816 | * Return value: | |
3817 | * 0 on success / SCSI_MLQUEUE_HOST_BUSY on failure | |
3818 | **/ | |
3819 | static int ipr_save_ioafp_mode_select(struct ipr_ioa_cfg *ioa_cfg, | |
3820 | struct scsi_cmnd *scsi_cmd) | |
3821 | { | |
3822 | if (!ioa_cfg->saved_mode_pages) { | |
3823 | ioa_cfg->saved_mode_pages = kmalloc(sizeof(struct ipr_mode_pages), | |
3824 | GFP_ATOMIC); | |
3825 | if (!ioa_cfg->saved_mode_pages) { | |
3826 | dev_err(&ioa_cfg->pdev->dev, | |
3827 | "IOA mode select buffer allocation failed\n"); | |
3828 | return SCSI_MLQUEUE_HOST_BUSY; | |
3829 | } | |
3830 | } | |
3831 | ||
3832 | memcpy(ioa_cfg->saved_mode_pages, scsi_cmd->buffer, scsi_cmd->cmnd[4]); | |
3833 | ioa_cfg->saved_mode_page_len = scsi_cmd->cmnd[4]; | |
3834 | return 0; | |
3835 | } | |
3836 | ||
3837 | /** | |
3838 | * ipr_queuecommand - Queue a mid-layer request | |
3839 | * @scsi_cmd: scsi command struct | |
3840 | * @done: done function | |
3841 | * | |
3842 | * This function queues a request generated by the mid-layer. | |
3843 | * | |
3844 | * Return value: | |
3845 | * 0 on success | |
3846 | * SCSI_MLQUEUE_DEVICE_BUSY if device is busy | |
3847 | * SCSI_MLQUEUE_HOST_BUSY if host is busy | |
3848 | **/ | |
3849 | static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd, | |
3850 | void (*done) (struct scsi_cmnd *)) | |
3851 | { | |
3852 | struct ipr_ioa_cfg *ioa_cfg; | |
3853 | struct ipr_resource_entry *res; | |
3854 | struct ipr_ioarcb *ioarcb; | |
3855 | struct ipr_cmnd *ipr_cmd; | |
3856 | int rc = 0; | |
3857 | ||
3858 | scsi_cmd->scsi_done = done; | |
3859 | ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata; | |
3860 | res = scsi_cmd->device->hostdata; | |
3861 | scsi_cmd->result = (DID_OK << 16); | |
3862 | ||
3863 | /* | |
3864 | * We are currently blocking all devices due to a host reset | |
3865 | * We have told the host to stop giving us new requests, but | |
3866 | * ERP ops don't count. FIXME | |
3867 | */ | |
3868 | if (unlikely(!ioa_cfg->allow_cmds && !ioa_cfg->ioa_is_dead)) | |
3869 | return SCSI_MLQUEUE_HOST_BUSY; | |
3870 | ||
3871 | /* | |
3872 | * FIXME - Create scsi_set_host_offline interface | |
3873 | * and the ioa_is_dead check can be removed | |
3874 | */ | |
3875 | if (unlikely(ioa_cfg->ioa_is_dead || !res)) { | |
3876 | memset(scsi_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); | |
3877 | scsi_cmd->result = (DID_NO_CONNECT << 16); | |
3878 | scsi_cmd->scsi_done(scsi_cmd); | |
3879 | return 0; | |
3880 | } | |
3881 | ||
3882 | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | |
3883 | ioarcb = &ipr_cmd->ioarcb; | |
3884 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q); | |
3885 | ||
3886 | memcpy(ioarcb->cmd_pkt.cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len); | |
3887 | ipr_cmd->scsi_cmd = scsi_cmd; | |
3888 | ioarcb->res_handle = res->cfgte.res_handle; | |
3889 | ipr_cmd->done = ipr_scsi_done; | |
3890 | ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr)); | |
3891 | ||
3892 | if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) { | |
3893 | if (scsi_cmd->underflow == 0) | |
3894 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK; | |
3895 | ||
3896 | if (res->needs_sync_complete) { | |
3897 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_SYNC_COMPLETE; | |
3898 | res->needs_sync_complete = 0; | |
3899 | } | |
3900 | ||
3901 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC; | |
3902 | ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST; | |
3903 | ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR; | |
3904 | ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd); | |
3905 | } | |
3906 | ||
3907 | if (scsi_cmd->cmnd[0] >= 0xC0 && | |
3908 | (!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE)) | |
3909 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | |
3910 | ||
3911 | if (ipr_is_ioa_resource(res) && scsi_cmd->cmnd[0] == MODE_SELECT) | |
3912 | rc = ipr_save_ioafp_mode_select(ioa_cfg, scsi_cmd); | |
3913 | ||
3914 | if (likely(rc == 0)) | |
3915 | rc = ipr_build_ioadl(ioa_cfg, ipr_cmd); | |
3916 | ||
3917 | if (likely(rc == 0)) { | |
3918 | mb(); | |
3919 | writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr), | |
3920 | ioa_cfg->regs.ioarrin_reg); | |
3921 | } else { | |
3922 | list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
3923 | return SCSI_MLQUEUE_HOST_BUSY; | |
3924 | } | |
3925 | ||
3926 | return 0; | |
3927 | } | |
3928 | ||
3929 | /** | |
3930 | * ipr_info - Get information about the card/driver | |
3931 | * @scsi_host: scsi host struct | |
3932 | * | |
3933 | * Return value: | |
3934 | * pointer to buffer with description string | |
3935 | **/ | |
3936 | static const char * ipr_ioa_info(struct Scsi_Host *host) | |
3937 | { | |
3938 | static char buffer[512]; | |
3939 | struct ipr_ioa_cfg *ioa_cfg; | |
3940 | unsigned long lock_flags = 0; | |
3941 | ||
3942 | ioa_cfg = (struct ipr_ioa_cfg *) host->hostdata; | |
3943 | ||
3944 | spin_lock_irqsave(host->host_lock, lock_flags); | |
3945 | sprintf(buffer, "IBM %X Storage Adapter", ioa_cfg->type); | |
3946 | spin_unlock_irqrestore(host->host_lock, lock_flags); | |
3947 | ||
3948 | return buffer; | |
3949 | } | |
3950 | ||
3951 | static struct scsi_host_template driver_template = { | |
3952 | .module = THIS_MODULE, | |
3953 | .name = "IPR", | |
3954 | .info = ipr_ioa_info, | |
3955 | .queuecommand = ipr_queuecommand, | |
3956 | .eh_abort_handler = ipr_eh_abort, | |
3957 | .eh_device_reset_handler = ipr_eh_dev_reset, | |
3958 | .eh_host_reset_handler = ipr_eh_host_reset, | |
3959 | .slave_alloc = ipr_slave_alloc, | |
3960 | .slave_configure = ipr_slave_configure, | |
3961 | .slave_destroy = ipr_slave_destroy, | |
3962 | .change_queue_depth = ipr_change_queue_depth, | |
3963 | .change_queue_type = ipr_change_queue_type, | |
3964 | .bios_param = ipr_biosparam, | |
3965 | .can_queue = IPR_MAX_COMMANDS, | |
3966 | .this_id = -1, | |
3967 | .sg_tablesize = IPR_MAX_SGLIST, | |
3968 | .max_sectors = IPR_IOA_MAX_SECTORS, | |
3969 | .cmd_per_lun = IPR_MAX_CMD_PER_LUN, | |
3970 | .use_clustering = ENABLE_CLUSTERING, | |
3971 | .shost_attrs = ipr_ioa_attrs, | |
3972 | .sdev_attrs = ipr_dev_attrs, | |
3973 | .proc_name = IPR_NAME | |
3974 | }; | |
3975 | ||
3976 | #ifdef CONFIG_PPC_PSERIES | |
3977 | static const u16 ipr_blocked_processors[] = { | |
3978 | PV_NORTHSTAR, | |
3979 | PV_PULSAR, | |
3980 | PV_POWER4, | |
3981 | PV_ICESTAR, | |
3982 | PV_SSTAR, | |
3983 | PV_POWER4p, | |
3984 | PV_630, | |
3985 | PV_630p | |
3986 | }; | |
3987 | ||
3988 | /** | |
3989 | * ipr_invalid_adapter - Determine if this adapter is supported on this hardware | |
3990 | * @ioa_cfg: ioa cfg struct | |
3991 | * | |
3992 | * Adapters that use Gemstone revision < 3.1 do not work reliably on | |
3993 | * certain pSeries hardware. This function determines if the given | |
3994 | * adapter is in one of these confgurations or not. | |
3995 | * | |
3996 | * Return value: | |
3997 | * 1 if adapter is not supported / 0 if adapter is supported | |
3998 | **/ | |
3999 | static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg) | |
4000 | { | |
4001 | u8 rev_id; | |
4002 | int i; | |
4003 | ||
4004 | if (ioa_cfg->type == 0x5702) { | |
4005 | if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID, | |
4006 | &rev_id) == PCIBIOS_SUCCESSFUL) { | |
4007 | if (rev_id < 4) { | |
4008 | for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){ | |
4009 | if (__is_processor(ipr_blocked_processors[i])) | |
4010 | return 1; | |
4011 | } | |
4012 | } | |
4013 | } | |
4014 | } | |
4015 | return 0; | |
4016 | } | |
4017 | #else | |
4018 | #define ipr_invalid_adapter(ioa_cfg) 0 | |
4019 | #endif | |
4020 | ||
4021 | /** | |
4022 | * ipr_ioa_bringdown_done - IOA bring down completion. | |
4023 | * @ipr_cmd: ipr command struct | |
4024 | * | |
4025 | * This function processes the completion of an adapter bring down. | |
4026 | * It wakes any reset sleepers. | |
4027 | * | |
4028 | * Return value: | |
4029 | * IPR_RC_JOB_RETURN | |
4030 | **/ | |
4031 | static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd) | |
4032 | { | |
4033 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4034 | ||
4035 | ENTER; | |
4036 | ioa_cfg->in_reset_reload = 0; | |
4037 | ioa_cfg->reset_retries = 0; | |
4038 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
4039 | wake_up_all(&ioa_cfg->reset_wait_q); | |
4040 | ||
4041 | spin_unlock_irq(ioa_cfg->host->host_lock); | |
4042 | scsi_unblock_requests(ioa_cfg->host); | |
4043 | spin_lock_irq(ioa_cfg->host->host_lock); | |
4044 | LEAVE; | |
4045 | ||
4046 | return IPR_RC_JOB_RETURN; | |
4047 | } | |
4048 | ||
4049 | /** | |
4050 | * ipr_ioa_reset_done - IOA reset completion. | |
4051 | * @ipr_cmd: ipr command struct | |
4052 | * | |
4053 | * This function processes the completion of an adapter reset. | |
4054 | * It schedules any necessary mid-layer add/removes and | |
4055 | * wakes any reset sleepers. | |
4056 | * | |
4057 | * Return value: | |
4058 | * IPR_RC_JOB_RETURN | |
4059 | **/ | |
4060 | static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd) | |
4061 | { | |
4062 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4063 | struct ipr_resource_entry *res; | |
4064 | struct ipr_hostrcb *hostrcb, *temp; | |
4065 | int i = 0; | |
4066 | ||
4067 | ENTER; | |
4068 | ioa_cfg->in_reset_reload = 0; | |
4069 | ioa_cfg->allow_cmds = 1; | |
4070 | ioa_cfg->reset_cmd = NULL; | |
4071 | ||
4072 | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | |
4073 | if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) { | |
4074 | ipr_trace; | |
4075 | break; | |
4076 | } | |
4077 | } | |
4078 | schedule_work(&ioa_cfg->work_q); | |
4079 | ||
4080 | list_for_each_entry_safe(hostrcb, temp, &ioa_cfg->hostrcb_free_q, queue) { | |
4081 | list_del(&hostrcb->queue); | |
4082 | if (i++ < IPR_NUM_LOG_HCAMS) | |
4083 | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb); | |
4084 | else | |
4085 | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); | |
4086 | } | |
4087 | ||
4088 | dev_info(&ioa_cfg->pdev->dev, "IOA initialized.\n"); | |
4089 | ||
4090 | ioa_cfg->reset_retries = 0; | |
4091 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
4092 | wake_up_all(&ioa_cfg->reset_wait_q); | |
4093 | ||
4094 | spin_unlock_irq(ioa_cfg->host->host_lock); | |
4095 | scsi_unblock_requests(ioa_cfg->host); | |
4096 | spin_lock_irq(ioa_cfg->host->host_lock); | |
4097 | ||
4098 | if (!ioa_cfg->allow_cmds) | |
4099 | scsi_block_requests(ioa_cfg->host); | |
4100 | ||
4101 | LEAVE; | |
4102 | return IPR_RC_JOB_RETURN; | |
4103 | } | |
4104 | ||
4105 | /** | |
4106 | * ipr_set_sup_dev_dflt - Initialize a Set Supported Device buffer | |
4107 | * @supported_dev: supported device struct | |
4108 | * @vpids: vendor product id struct | |
4109 | * | |
4110 | * Return value: | |
4111 | * none | |
4112 | **/ | |
4113 | static void ipr_set_sup_dev_dflt(struct ipr_supported_device *supported_dev, | |
4114 | struct ipr_std_inq_vpids *vpids) | |
4115 | { | |
4116 | memset(supported_dev, 0, sizeof(struct ipr_supported_device)); | |
4117 | memcpy(&supported_dev->vpids, vpids, sizeof(struct ipr_std_inq_vpids)); | |
4118 | supported_dev->num_records = 1; | |
4119 | supported_dev->data_length = | |
4120 | cpu_to_be16(sizeof(struct ipr_supported_device)); | |
4121 | supported_dev->reserved = 0; | |
4122 | } | |
4123 | ||
4124 | /** | |
4125 | * ipr_set_supported_devs - Send Set Supported Devices for a device | |
4126 | * @ipr_cmd: ipr command struct | |
4127 | * | |
4128 | * This function send a Set Supported Devices to the adapter | |
4129 | * | |
4130 | * Return value: | |
4131 | * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | |
4132 | **/ | |
4133 | static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd) | |
4134 | { | |
4135 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4136 | struct ipr_supported_device *supp_dev = &ioa_cfg->vpd_cbs->supp_dev; | |
4137 | struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; | |
4138 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
4139 | struct ipr_resource_entry *res = ipr_cmd->u.res; | |
4140 | ||
4141 | ipr_cmd->job_step = ipr_ioa_reset_done; | |
4142 | ||
4143 | list_for_each_entry_continue(res, &ioa_cfg->used_res_q, queue) { | |
4144 | if (!ipr_is_af_dasd_device(res)) | |
4145 | continue; | |
4146 | ||
4147 | ipr_cmd->u.res = res; | |
4148 | ipr_set_sup_dev_dflt(supp_dev, &res->cfgte.std_inq_data.vpids); | |
4149 | ||
4150 | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | |
4151 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | |
4152 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | |
4153 | ||
4154 | ioarcb->cmd_pkt.cdb[0] = IPR_SET_SUPPORTED_DEVICES; | |
4155 | ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_supported_device) >> 8) & 0xff; | |
4156 | ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_supported_device) & 0xff; | |
4157 | ||
4158 | ioadl->flags_and_data_len = cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST | | |
4159 | sizeof(struct ipr_supported_device)); | |
4160 | ioadl->address = cpu_to_be32(ioa_cfg->vpd_cbs_dma + | |
4161 | offsetof(struct ipr_misc_cbs, supp_dev)); | |
4162 | ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
4163 | ioarcb->write_data_transfer_length = | |
4164 | cpu_to_be32(sizeof(struct ipr_supported_device)); | |
4165 | ||
4166 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, | |
4167 | IPR_SET_SUP_DEVICE_TIMEOUT); | |
4168 | ||
4169 | ipr_cmd->job_step = ipr_set_supported_devs; | |
4170 | return IPR_RC_JOB_RETURN; | |
4171 | } | |
4172 | ||
4173 | return IPR_RC_JOB_CONTINUE; | |
4174 | } | |
4175 | ||
4176 | /** | |
4177 | * ipr_get_mode_page - Locate specified mode page | |
4178 | * @mode_pages: mode page buffer | |
4179 | * @page_code: page code to find | |
4180 | * @len: minimum required length for mode page | |
4181 | * | |
4182 | * Return value: | |
4183 | * pointer to mode page / NULL on failure | |
4184 | **/ | |
4185 | static void *ipr_get_mode_page(struct ipr_mode_pages *mode_pages, | |
4186 | u32 page_code, u32 len) | |
4187 | { | |
4188 | struct ipr_mode_page_hdr *mode_hdr; | |
4189 | u32 page_length; | |
4190 | u32 length; | |
4191 | ||
4192 | if (!mode_pages || (mode_pages->hdr.length == 0)) | |
4193 | return NULL; | |
4194 | ||
4195 | length = (mode_pages->hdr.length + 1) - 4 - mode_pages->hdr.block_desc_len; | |
4196 | mode_hdr = (struct ipr_mode_page_hdr *) | |
4197 | (mode_pages->data + mode_pages->hdr.block_desc_len); | |
4198 | ||
4199 | while (length) { | |
4200 | if (IPR_GET_MODE_PAGE_CODE(mode_hdr) == page_code) { | |
4201 | if (mode_hdr->page_length >= (len - sizeof(struct ipr_mode_page_hdr))) | |
4202 | return mode_hdr; | |
4203 | break; | |
4204 | } else { | |
4205 | page_length = (sizeof(struct ipr_mode_page_hdr) + | |
4206 | mode_hdr->page_length); | |
4207 | length -= page_length; | |
4208 | mode_hdr = (struct ipr_mode_page_hdr *) | |
4209 | ((unsigned long)mode_hdr + page_length); | |
4210 | } | |
4211 | } | |
4212 | return NULL; | |
4213 | } | |
4214 | ||
4215 | /** | |
4216 | * ipr_check_term_power - Check for term power errors | |
4217 | * @ioa_cfg: ioa config struct | |
4218 | * @mode_pages: IOAFP mode pages buffer | |
4219 | * | |
4220 | * Check the IOAFP's mode page 28 for term power errors | |
4221 | * | |
4222 | * Return value: | |
4223 | * nothing | |
4224 | **/ | |
4225 | static void ipr_check_term_power(struct ipr_ioa_cfg *ioa_cfg, | |
4226 | struct ipr_mode_pages *mode_pages) | |
4227 | { | |
4228 | int i; | |
4229 | int entry_length; | |
4230 | struct ipr_dev_bus_entry *bus; | |
4231 | struct ipr_mode_page28 *mode_page; | |
4232 | ||
4233 | mode_page = ipr_get_mode_page(mode_pages, 0x28, | |
4234 | sizeof(struct ipr_mode_page28)); | |
4235 | ||
4236 | entry_length = mode_page->entry_length; | |
4237 | ||
4238 | bus = mode_page->bus; | |
4239 | ||
4240 | for (i = 0; i < mode_page->num_entries; i++) { | |
4241 | if (bus->flags & IPR_SCSI_ATTR_NO_TERM_PWR) { | |
4242 | dev_err(&ioa_cfg->pdev->dev, | |
4243 | "Term power is absent on scsi bus %d\n", | |
4244 | bus->res_addr.bus); | |
4245 | } | |
4246 | ||
4247 | bus = (struct ipr_dev_bus_entry *)((char *)bus + entry_length); | |
4248 | } | |
4249 | } | |
4250 | ||
4251 | /** | |
4252 | * ipr_scsi_bus_speed_limit - Limit the SCSI speed based on SES table | |
4253 | * @ioa_cfg: ioa config struct | |
4254 | * | |
4255 | * Looks through the config table checking for SES devices. If | |
4256 | * the SES device is in the SES table indicating a maximum SCSI | |
4257 | * bus speed, the speed is limited for the bus. | |
4258 | * | |
4259 | * Return value: | |
4260 | * none | |
4261 | **/ | |
4262 | static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg *ioa_cfg) | |
4263 | { | |
4264 | u32 max_xfer_rate; | |
4265 | int i; | |
4266 | ||
4267 | for (i = 0; i < IPR_MAX_NUM_BUSES; i++) { | |
4268 | max_xfer_rate = ipr_get_max_scsi_speed(ioa_cfg, i, | |
4269 | ioa_cfg->bus_attr[i].bus_width); | |
4270 | ||
4271 | if (max_xfer_rate < ioa_cfg->bus_attr[i].max_xfer_rate) | |
4272 | ioa_cfg->bus_attr[i].max_xfer_rate = max_xfer_rate; | |
4273 | } | |
4274 | } | |
4275 | ||
4276 | /** | |
4277 | * ipr_modify_ioafp_mode_page_28 - Modify IOAFP Mode Page 28 | |
4278 | * @ioa_cfg: ioa config struct | |
4279 | * @mode_pages: mode page 28 buffer | |
4280 | * | |
4281 | * Updates mode page 28 based on driver configuration | |
4282 | * | |
4283 | * Return value: | |
4284 | * none | |
4285 | **/ | |
4286 | static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg, | |
4287 | struct ipr_mode_pages *mode_pages) | |
4288 | { | |
4289 | int i, entry_length; | |
4290 | struct ipr_dev_bus_entry *bus; | |
4291 | struct ipr_bus_attributes *bus_attr; | |
4292 | struct ipr_mode_page28 *mode_page; | |
4293 | ||
4294 | mode_page = ipr_get_mode_page(mode_pages, 0x28, | |
4295 | sizeof(struct ipr_mode_page28)); | |
4296 | ||
4297 | entry_length = mode_page->entry_length; | |
4298 | ||
4299 | /* Loop for each device bus entry */ | |
4300 | for (i = 0, bus = mode_page->bus; | |
4301 | i < mode_page->num_entries; | |
4302 | i++, bus = (struct ipr_dev_bus_entry *)((u8 *)bus + entry_length)) { | |
4303 | if (bus->res_addr.bus > IPR_MAX_NUM_BUSES) { | |
4304 | dev_err(&ioa_cfg->pdev->dev, | |
4305 | "Invalid resource address reported: 0x%08X\n", | |
4306 | IPR_GET_PHYS_LOC(bus->res_addr)); | |
4307 | continue; | |
4308 | } | |
4309 | ||
4310 | bus_attr = &ioa_cfg->bus_attr[i]; | |
4311 | bus->extended_reset_delay = IPR_EXTENDED_RESET_DELAY; | |
4312 | bus->bus_width = bus_attr->bus_width; | |
4313 | bus->max_xfer_rate = cpu_to_be32(bus_attr->max_xfer_rate); | |
4314 | bus->flags &= ~IPR_SCSI_ATTR_QAS_MASK; | |
4315 | if (bus_attr->qas_enabled) | |
4316 | bus->flags |= IPR_SCSI_ATTR_ENABLE_QAS; | |
4317 | else | |
4318 | bus->flags |= IPR_SCSI_ATTR_DISABLE_QAS; | |
4319 | } | |
4320 | } | |
4321 | ||
4322 | /** | |
4323 | * ipr_build_mode_select - Build a mode select command | |
4324 | * @ipr_cmd: ipr command struct | |
4325 | * @res_handle: resource handle to send command to | |
4326 | * @parm: Byte 2 of Mode Sense command | |
4327 | * @dma_addr: DMA buffer address | |
4328 | * @xfer_len: data transfer length | |
4329 | * | |
4330 | * Return value: | |
4331 | * none | |
4332 | **/ | |
4333 | static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd, | |
4334 | __be32 res_handle, u8 parm, u32 dma_addr, | |
4335 | u8 xfer_len) | |
4336 | { | |
4337 | struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; | |
4338 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
4339 | ||
4340 | ioarcb->res_handle = res_handle; | |
4341 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | |
4342 | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | |
4343 | ioarcb->cmd_pkt.cdb[0] = MODE_SELECT; | |
4344 | ioarcb->cmd_pkt.cdb[1] = parm; | |
4345 | ioarcb->cmd_pkt.cdb[4] = xfer_len; | |
4346 | ||
4347 | ioadl->flags_and_data_len = | |
4348 | cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST | xfer_len); | |
4349 | ioadl->address = cpu_to_be32(dma_addr); | |
4350 | ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
4351 | ioarcb->write_data_transfer_length = cpu_to_be32(xfer_len); | |
4352 | } | |
4353 | ||
4354 | /** | |
4355 | * ipr_ioafp_mode_select_page28 - Issue Mode Select Page 28 to IOA | |
4356 | * @ipr_cmd: ipr command struct | |
4357 | * | |
4358 | * This function sets up the SCSI bus attributes and sends | |
4359 | * a Mode Select for Page 28 to activate them. | |
4360 | * | |
4361 | * Return value: | |
4362 | * IPR_RC_JOB_RETURN | |
4363 | **/ | |
4364 | static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd) | |
4365 | { | |
4366 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4367 | struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages; | |
4368 | int length; | |
4369 | ||
4370 | ENTER; | |
4371 | if (ioa_cfg->saved_mode_pages) { | |
4372 | memcpy(mode_pages, ioa_cfg->saved_mode_pages, | |
4373 | ioa_cfg->saved_mode_page_len); | |
4374 | length = ioa_cfg->saved_mode_page_len; | |
4375 | } else { | |
4376 | ipr_scsi_bus_speed_limit(ioa_cfg); | |
4377 | ipr_check_term_power(ioa_cfg, mode_pages); | |
4378 | ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages); | |
4379 | length = mode_pages->hdr.length + 1; | |
4380 | mode_pages->hdr.length = 0; | |
4381 | } | |
4382 | ||
4383 | ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11, | |
4384 | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages), | |
4385 | length); | |
4386 | ||
4387 | ipr_cmd->job_step = ipr_set_supported_devs; | |
4388 | ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next, | |
4389 | struct ipr_resource_entry, queue); | |
4390 | ||
4391 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | |
4392 | ||
4393 | LEAVE; | |
4394 | return IPR_RC_JOB_RETURN; | |
4395 | } | |
4396 | ||
4397 | /** | |
4398 | * ipr_build_mode_sense - Builds a mode sense command | |
4399 | * @ipr_cmd: ipr command struct | |
4400 | * @res: resource entry struct | |
4401 | * @parm: Byte 2 of mode sense command | |
4402 | * @dma_addr: DMA address of mode sense buffer | |
4403 | * @xfer_len: Size of DMA buffer | |
4404 | * | |
4405 | * Return value: | |
4406 | * none | |
4407 | **/ | |
4408 | static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd, | |
4409 | __be32 res_handle, | |
4410 | u8 parm, u32 dma_addr, u8 xfer_len) | |
4411 | { | |
4412 | struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; | |
4413 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
4414 | ||
4415 | ioarcb->res_handle = res_handle; | |
4416 | ioarcb->cmd_pkt.cdb[0] = MODE_SENSE; | |
4417 | ioarcb->cmd_pkt.cdb[2] = parm; | |
4418 | ioarcb->cmd_pkt.cdb[4] = xfer_len; | |
4419 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | |
4420 | ||
4421 | ioadl->flags_and_data_len = | |
4422 | cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len); | |
4423 | ioadl->address = cpu_to_be32(dma_addr); | |
4424 | ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
4425 | ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len); | |
4426 | } | |
4427 | ||
4428 | /** | |
4429 | * ipr_ioafp_mode_sense_page28 - Issue Mode Sense Page 28 to IOA | |
4430 | * @ipr_cmd: ipr command struct | |
4431 | * | |
4432 | * This function send a Page 28 mode sense to the IOA to | |
4433 | * retrieve SCSI bus attributes. | |
4434 | * | |
4435 | * Return value: | |
4436 | * IPR_RC_JOB_RETURN | |
4437 | **/ | |
4438 | static int ipr_ioafp_mode_sense_page28(struct ipr_cmnd *ipr_cmd) | |
4439 | { | |
4440 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4441 | ||
4442 | ENTER; | |
4443 | ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), | |
4444 | 0x28, ioa_cfg->vpd_cbs_dma + | |
4445 | offsetof(struct ipr_misc_cbs, mode_pages), | |
4446 | sizeof(struct ipr_mode_pages)); | |
4447 | ||
4448 | ipr_cmd->job_step = ipr_ioafp_mode_select_page28; | |
4449 | ||
4450 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | |
4451 | ||
4452 | LEAVE; | |
4453 | return IPR_RC_JOB_RETURN; | |
4454 | } | |
4455 | ||
4456 | /** | |
4457 | * ipr_init_res_table - Initialize the resource table | |
4458 | * @ipr_cmd: ipr command struct | |
4459 | * | |
4460 | * This function looks through the existing resource table, comparing | |
4461 | * it with the config table. This function will take care of old/new | |
4462 | * devices and schedule adding/removing them from the mid-layer | |
4463 | * as appropriate. | |
4464 | * | |
4465 | * Return value: | |
4466 | * IPR_RC_JOB_CONTINUE | |
4467 | **/ | |
4468 | static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd) | |
4469 | { | |
4470 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4471 | struct ipr_resource_entry *res, *temp; | |
4472 | struct ipr_config_table_entry *cfgte; | |
4473 | int found, i; | |
4474 | LIST_HEAD(old_res); | |
4475 | ||
4476 | ENTER; | |
4477 | if (ioa_cfg->cfg_table->hdr.flags & IPR_UCODE_DOWNLOAD_REQ) | |
4478 | dev_err(&ioa_cfg->pdev->dev, "Microcode download required\n"); | |
4479 | ||
4480 | list_for_each_entry_safe(res, temp, &ioa_cfg->used_res_q, queue) | |
4481 | list_move_tail(&res->queue, &old_res); | |
4482 | ||
4483 | for (i = 0; i < ioa_cfg->cfg_table->hdr.num_entries; i++) { | |
4484 | cfgte = &ioa_cfg->cfg_table->dev[i]; | |
4485 | found = 0; | |
4486 | ||
4487 | list_for_each_entry_safe(res, temp, &old_res, queue) { | |
4488 | if (!memcmp(&res->cfgte.res_addr, | |
4489 | &cfgte->res_addr, sizeof(cfgte->res_addr))) { | |
4490 | list_move_tail(&res->queue, &ioa_cfg->used_res_q); | |
4491 | found = 1; | |
4492 | break; | |
4493 | } | |
4494 | } | |
4495 | ||
4496 | if (!found) { | |
4497 | if (list_empty(&ioa_cfg->free_res_q)) { | |
4498 | dev_err(&ioa_cfg->pdev->dev, "Too many devices attached\n"); | |
4499 | break; | |
4500 | } | |
4501 | ||
4502 | found = 1; | |
4503 | res = list_entry(ioa_cfg->free_res_q.next, | |
4504 | struct ipr_resource_entry, queue); | |
4505 | list_move_tail(&res->queue, &ioa_cfg->used_res_q); | |
4506 | ipr_init_res_entry(res); | |
4507 | res->add_to_ml = 1; | |
4508 | } | |
4509 | ||
4510 | if (found) | |
4511 | memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry)); | |
4512 | } | |
4513 | ||
4514 | list_for_each_entry_safe(res, temp, &old_res, queue) { | |
4515 | if (res->sdev) { | |
4516 | res->del_from_ml = 1; | |
4517 | res->sdev->hostdata = NULL; | |
4518 | list_move_tail(&res->queue, &ioa_cfg->used_res_q); | |
4519 | } else { | |
4520 | list_move_tail(&res->queue, &ioa_cfg->free_res_q); | |
4521 | } | |
4522 | } | |
4523 | ||
4524 | ipr_cmd->job_step = ipr_ioafp_mode_sense_page28; | |
4525 | ||
4526 | LEAVE; | |
4527 | return IPR_RC_JOB_CONTINUE; | |
4528 | } | |
4529 | ||
4530 | /** | |
4531 | * ipr_ioafp_query_ioa_cfg - Send a Query IOA Config to the adapter. | |
4532 | * @ipr_cmd: ipr command struct | |
4533 | * | |
4534 | * This function sends a Query IOA Configuration command | |
4535 | * to the adapter to retrieve the IOA configuration table. | |
4536 | * | |
4537 | * Return value: | |
4538 | * IPR_RC_JOB_RETURN | |
4539 | **/ | |
4540 | static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd) | |
4541 | { | |
4542 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4543 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
4544 | struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; | |
4545 | struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; | |
4546 | ||
4547 | ENTER; | |
4548 | dev_info(&ioa_cfg->pdev->dev, "Adapter firmware version: %02X%02X%02X%02X\n", | |
4549 | ucode_vpd->major_release, ucode_vpd->card_type, | |
4550 | ucode_vpd->minor_release[0], ucode_vpd->minor_release[1]); | |
4551 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | |
4552 | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | |
4553 | ||
4554 | ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG; | |
4555 | ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_config_table) >> 8) & 0xff; | |
4556 | ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_config_table) & 0xff; | |
4557 | ||
4558 | ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
4559 | ioarcb->read_data_transfer_length = | |
4560 | cpu_to_be32(sizeof(struct ipr_config_table)); | |
4561 | ||
4562 | ioadl->address = cpu_to_be32(ioa_cfg->cfg_table_dma); | |
4563 | ioadl->flags_and_data_len = | |
4564 | cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(struct ipr_config_table)); | |
4565 | ||
4566 | ipr_cmd->job_step = ipr_init_res_table; | |
4567 | ||
4568 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | |
4569 | ||
4570 | LEAVE; | |
4571 | return IPR_RC_JOB_RETURN; | |
4572 | } | |
4573 | ||
4574 | /** | |
4575 | * ipr_ioafp_inquiry - Send an Inquiry to the adapter. | |
4576 | * @ipr_cmd: ipr command struct | |
4577 | * | |
4578 | * This utility function sends an inquiry to the adapter. | |
4579 | * | |
4580 | * Return value: | |
4581 | * none | |
4582 | **/ | |
4583 | static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page, | |
4584 | u32 dma_addr, u8 xfer_len) | |
4585 | { | |
4586 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
4587 | struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; | |
4588 | ||
4589 | ENTER; | |
4590 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | |
4591 | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | |
4592 | ||
4593 | ioarcb->cmd_pkt.cdb[0] = INQUIRY; | |
4594 | ioarcb->cmd_pkt.cdb[1] = flags; | |
4595 | ioarcb->cmd_pkt.cdb[2] = page; | |
4596 | ioarcb->cmd_pkt.cdb[4] = xfer_len; | |
4597 | ||
4598 | ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | |
4599 | ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len); | |
4600 | ||
4601 | ioadl->address = cpu_to_be32(dma_addr); | |
4602 | ioadl->flags_and_data_len = | |
4603 | cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len); | |
4604 | ||
4605 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | |
4606 | LEAVE; | |
4607 | } | |
4608 | ||
4609 | /** | |
4610 | * ipr_ioafp_page3_inquiry - Send a Page 3 Inquiry to the adapter. | |
4611 | * @ipr_cmd: ipr command struct | |
4612 | * | |
4613 | * This function sends a Page 3 inquiry to the adapter | |
4614 | * to retrieve software VPD information. | |
4615 | * | |
4616 | * Return value: | |
4617 | * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | |
4618 | **/ | |
4619 | static int ipr_ioafp_page3_inquiry(struct ipr_cmnd *ipr_cmd) | |
4620 | { | |
4621 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4622 | char type[5]; | |
4623 | ||
4624 | ENTER; | |
4625 | ||
4626 | /* Grab the type out of the VPD and store it away */ | |
4627 | memcpy(type, ioa_cfg->vpd_cbs->ioa_vpd.std_inq_data.vpids.product_id, 4); | |
4628 | type[4] = '\0'; | |
4629 | ioa_cfg->type = simple_strtoul((char *)type, NULL, 16); | |
4630 | ||
4631 | ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg; | |
4632 | ||
4633 | ipr_ioafp_inquiry(ipr_cmd, 1, 3, | |
4634 | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page3_data), | |
4635 | sizeof(struct ipr_inquiry_page3)); | |
4636 | ||
4637 | LEAVE; | |
4638 | return IPR_RC_JOB_RETURN; | |
4639 | } | |
4640 | ||
4641 | /** | |
4642 | * ipr_ioafp_std_inquiry - Send a Standard Inquiry to the adapter. | |
4643 | * @ipr_cmd: ipr command struct | |
4644 | * | |
4645 | * This function sends a standard inquiry to the adapter. | |
4646 | * | |
4647 | * Return value: | |
4648 | * IPR_RC_JOB_RETURN | |
4649 | **/ | |
4650 | static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd) | |
4651 | { | |
4652 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4653 | ||
4654 | ENTER; | |
4655 | ipr_cmd->job_step = ipr_ioafp_page3_inquiry; | |
4656 | ||
4657 | ipr_ioafp_inquiry(ipr_cmd, 0, 0, | |
4658 | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, ioa_vpd), | |
4659 | sizeof(struct ipr_ioa_vpd)); | |
4660 | ||
4661 | LEAVE; | |
4662 | return IPR_RC_JOB_RETURN; | |
4663 | } | |
4664 | ||
4665 | /** | |
4666 | * ipr_ioafp_indentify_hrrq - Send Identify Host RRQ. | |
4667 | * @ipr_cmd: ipr command struct | |
4668 | * | |
4669 | * This function send an Identify Host Request Response Queue | |
4670 | * command to establish the HRRQ with the adapter. | |
4671 | * | |
4672 | * Return value: | |
4673 | * IPR_RC_JOB_RETURN | |
4674 | **/ | |
4675 | static int ipr_ioafp_indentify_hrrq(struct ipr_cmnd *ipr_cmd) | |
4676 | { | |
4677 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4678 | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | |
4679 | ||
4680 | ENTER; | |
4681 | dev_info(&ioa_cfg->pdev->dev, "Starting IOA initialization sequence.\n"); | |
4682 | ||
4683 | ioarcb->cmd_pkt.cdb[0] = IPR_ID_HOST_RR_Q; | |
4684 | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | |
4685 | ||
4686 | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | |
4687 | ioarcb->cmd_pkt.cdb[2] = | |
4688 | ((u32) ioa_cfg->host_rrq_dma >> 24) & 0xff; | |
4689 | ioarcb->cmd_pkt.cdb[3] = | |
4690 | ((u32) ioa_cfg->host_rrq_dma >> 16) & 0xff; | |
4691 | ioarcb->cmd_pkt.cdb[4] = | |
4692 | ((u32) ioa_cfg->host_rrq_dma >> 8) & 0xff; | |
4693 | ioarcb->cmd_pkt.cdb[5] = | |
4694 | ((u32) ioa_cfg->host_rrq_dma) & 0xff; | |
4695 | ioarcb->cmd_pkt.cdb[7] = | |
4696 | ((sizeof(u32) * IPR_NUM_CMD_BLKS) >> 8) & 0xff; | |
4697 | ioarcb->cmd_pkt.cdb[8] = | |
4698 | (sizeof(u32) * IPR_NUM_CMD_BLKS) & 0xff; | |
4699 | ||
4700 | ipr_cmd->job_step = ipr_ioafp_std_inquiry; | |
4701 | ||
4702 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | |
4703 | ||
4704 | LEAVE; | |
4705 | return IPR_RC_JOB_RETURN; | |
4706 | } | |
4707 | ||
4708 | /** | |
4709 | * ipr_reset_timer_done - Adapter reset timer function | |
4710 | * @ipr_cmd: ipr command struct | |
4711 | * | |
4712 | * Description: This function is used in adapter reset processing | |
4713 | * for timing events. If the reset_cmd pointer in the IOA | |
4714 | * config struct is not this adapter's we are doing nested | |
4715 | * resets and fail_all_ops will take care of freeing the | |
4716 | * command block. | |
4717 | * | |
4718 | * Return value: | |
4719 | * none | |
4720 | **/ | |
4721 | static void ipr_reset_timer_done(struct ipr_cmnd *ipr_cmd) | |
4722 | { | |
4723 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4724 | unsigned long lock_flags = 0; | |
4725 | ||
4726 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
4727 | ||
4728 | if (ioa_cfg->reset_cmd == ipr_cmd) { | |
4729 | list_del(&ipr_cmd->queue); | |
4730 | ipr_cmd->done(ipr_cmd); | |
4731 | } | |
4732 | ||
4733 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
4734 | } | |
4735 | ||
4736 | /** | |
4737 | * ipr_reset_start_timer - Start a timer for adapter reset job | |
4738 | * @ipr_cmd: ipr command struct | |
4739 | * @timeout: timeout value | |
4740 | * | |
4741 | * Description: This function is used in adapter reset processing | |
4742 | * for timing events. If the reset_cmd pointer in the IOA | |
4743 | * config struct is not this adapter's we are doing nested | |
4744 | * resets and fail_all_ops will take care of freeing the | |
4745 | * command block. | |
4746 | * | |
4747 | * Return value: | |
4748 | * none | |
4749 | **/ | |
4750 | static void ipr_reset_start_timer(struct ipr_cmnd *ipr_cmd, | |
4751 | unsigned long timeout) | |
4752 | { | |
4753 | list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q); | |
4754 | ipr_cmd->done = ipr_reset_ioa_job; | |
4755 | ||
4756 | ipr_cmd->timer.data = (unsigned long) ipr_cmd; | |
4757 | ipr_cmd->timer.expires = jiffies + timeout; | |
4758 | ipr_cmd->timer.function = (void (*)(unsigned long))ipr_reset_timer_done; | |
4759 | add_timer(&ipr_cmd->timer); | |
4760 | } | |
4761 | ||
4762 | /** | |
4763 | * ipr_init_ioa_mem - Initialize ioa_cfg control block | |
4764 | * @ioa_cfg: ioa cfg struct | |
4765 | * | |
4766 | * Return value: | |
4767 | * nothing | |
4768 | **/ | |
4769 | static void ipr_init_ioa_mem(struct ipr_ioa_cfg *ioa_cfg) | |
4770 | { | |
4771 | memset(ioa_cfg->host_rrq, 0, sizeof(u32) * IPR_NUM_CMD_BLKS); | |
4772 | ||
4773 | /* Initialize Host RRQ pointers */ | |
4774 | ioa_cfg->hrrq_start = ioa_cfg->host_rrq; | |
4775 | ioa_cfg->hrrq_end = &ioa_cfg->host_rrq[IPR_NUM_CMD_BLKS - 1]; | |
4776 | ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start; | |
4777 | ioa_cfg->toggle_bit = 1; | |
4778 | ||
4779 | /* Zero out config table */ | |
4780 | memset(ioa_cfg->cfg_table, 0, sizeof(struct ipr_config_table)); | |
4781 | } | |
4782 | ||
4783 | /** | |
4784 | * ipr_reset_enable_ioa - Enable the IOA following a reset. | |
4785 | * @ipr_cmd: ipr command struct | |
4786 | * | |
4787 | * This function reinitializes some control blocks and | |
4788 | * enables destructive diagnostics on the adapter. | |
4789 | * | |
4790 | * Return value: | |
4791 | * IPR_RC_JOB_RETURN | |
4792 | **/ | |
4793 | static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd) | |
4794 | { | |
4795 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4796 | volatile u32 int_reg; | |
4797 | ||
4798 | ENTER; | |
4799 | ipr_cmd->job_step = ipr_ioafp_indentify_hrrq; | |
4800 | ipr_init_ioa_mem(ioa_cfg); | |
4801 | ||
4802 | ioa_cfg->allow_interrupts = 1; | |
4803 | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | |
4804 | ||
4805 | if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) { | |
4806 | writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED), | |
4807 | ioa_cfg->regs.clr_interrupt_mask_reg); | |
4808 | int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | |
4809 | return IPR_RC_JOB_CONTINUE; | |
4810 | } | |
4811 | ||
4812 | /* Enable destructive diagnostics on IOA */ | |
4813 | writel(IPR_DOORBELL, ioa_cfg->regs.set_uproc_interrupt_reg); | |
4814 | ||
4815 | writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg); | |
4816 | int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | |
4817 | ||
4818 | dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n"); | |
4819 | ||
4820 | ipr_cmd->timer.data = (unsigned long) ipr_cmd; | |
4821 | ipr_cmd->timer.expires = jiffies + (ipr_transop_timeout * HZ); | |
4822 | ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout; | |
4823 | ipr_cmd->done = ipr_reset_ioa_job; | |
4824 | add_timer(&ipr_cmd->timer); | |
4825 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q); | |
4826 | ||
4827 | LEAVE; | |
4828 | return IPR_RC_JOB_RETURN; | |
4829 | } | |
4830 | ||
4831 | /** | |
4832 | * ipr_reset_wait_for_dump - Wait for a dump to timeout. | |
4833 | * @ipr_cmd: ipr command struct | |
4834 | * | |
4835 | * This function is invoked when an adapter dump has run out | |
4836 | * of processing time. | |
4837 | * | |
4838 | * Return value: | |
4839 | * IPR_RC_JOB_CONTINUE | |
4840 | **/ | |
4841 | static int ipr_reset_wait_for_dump(struct ipr_cmnd *ipr_cmd) | |
4842 | { | |
4843 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4844 | ||
4845 | if (ioa_cfg->sdt_state == GET_DUMP) | |
4846 | ioa_cfg->sdt_state = ABORT_DUMP; | |
4847 | ||
4848 | ipr_cmd->job_step = ipr_reset_alert; | |
4849 | ||
4850 | return IPR_RC_JOB_CONTINUE; | |
4851 | } | |
4852 | ||
4853 | /** | |
4854 | * ipr_unit_check_no_data - Log a unit check/no data error log | |
4855 | * @ioa_cfg: ioa config struct | |
4856 | * | |
4857 | * Logs an error indicating the adapter unit checked, but for some | |
4858 | * reason, we were unable to fetch the unit check buffer. | |
4859 | * | |
4860 | * Return value: | |
4861 | * nothing | |
4862 | **/ | |
4863 | static void ipr_unit_check_no_data(struct ipr_ioa_cfg *ioa_cfg) | |
4864 | { | |
4865 | ioa_cfg->errors_logged++; | |
4866 | dev_err(&ioa_cfg->pdev->dev, "IOA unit check with no data\n"); | |
4867 | } | |
4868 | ||
4869 | /** | |
4870 | * ipr_get_unit_check_buffer - Get the unit check buffer from the IOA | |
4871 | * @ioa_cfg: ioa config struct | |
4872 | * | |
4873 | * Fetches the unit check buffer from the adapter by clocking the data | |
4874 | * through the mailbox register. | |
4875 | * | |
4876 | * Return value: | |
4877 | * nothing | |
4878 | **/ | |
4879 | static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg) | |
4880 | { | |
4881 | unsigned long mailbox; | |
4882 | struct ipr_hostrcb *hostrcb; | |
4883 | struct ipr_uc_sdt sdt; | |
4884 | int rc, length; | |
4885 | ||
4886 | mailbox = readl(ioa_cfg->ioa_mailbox); | |
4887 | ||
4888 | if (!ipr_sdt_is_fmt2(mailbox)) { | |
4889 | ipr_unit_check_no_data(ioa_cfg); | |
4890 | return; | |
4891 | } | |
4892 | ||
4893 | memset(&sdt, 0, sizeof(struct ipr_uc_sdt)); | |
4894 | rc = ipr_get_ldump_data_section(ioa_cfg, mailbox, (__be32 *) &sdt, | |
4895 | (sizeof(struct ipr_uc_sdt)) / sizeof(__be32)); | |
4896 | ||
4897 | if (rc || (be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE) || | |
4898 | !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY)) { | |
4899 | ipr_unit_check_no_data(ioa_cfg); | |
4900 | return; | |
4901 | } | |
4902 | ||
4903 | /* Find length of the first sdt entry (UC buffer) */ | |
4904 | length = (be32_to_cpu(sdt.entry[0].end_offset) - | |
4905 | be32_to_cpu(sdt.entry[0].bar_str_offset)) & IPR_FMT2_MBX_ADDR_MASK; | |
4906 | ||
4907 | hostrcb = list_entry(ioa_cfg->hostrcb_free_q.next, | |
4908 | struct ipr_hostrcb, queue); | |
4909 | list_del(&hostrcb->queue); | |
4910 | memset(&hostrcb->hcam, 0, sizeof(hostrcb->hcam)); | |
4911 | ||
4912 | rc = ipr_get_ldump_data_section(ioa_cfg, | |
4913 | be32_to_cpu(sdt.entry[0].bar_str_offset), | |
4914 | (__be32 *)&hostrcb->hcam, | |
4915 | min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32)); | |
4916 | ||
4917 | if (!rc) | |
4918 | ipr_handle_log_data(ioa_cfg, hostrcb); | |
4919 | else | |
4920 | ipr_unit_check_no_data(ioa_cfg); | |
4921 | ||
4922 | list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q); | |
4923 | } | |
4924 | ||
4925 | /** | |
4926 | * ipr_reset_restore_cfg_space - Restore PCI config space. | |
4927 | * @ipr_cmd: ipr command struct | |
4928 | * | |
4929 | * Description: This function restores the saved PCI config space of | |
4930 | * the adapter, fails all outstanding ops back to the callers, and | |
4931 | * fetches the dump/unit check if applicable to this reset. | |
4932 | * | |
4933 | * Return value: | |
4934 | * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | |
4935 | **/ | |
4936 | static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) | |
4937 | { | |
4938 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4939 | int rc; | |
4940 | ||
4941 | ENTER; | |
b30197d2 | 4942 | pci_unblock_user_cfg_access(ioa_cfg->pdev); |
1da177e4 LT |
4943 | rc = pci_restore_state(ioa_cfg->pdev); |
4944 | ||
4945 | if (rc != PCIBIOS_SUCCESSFUL) { | |
4946 | ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); | |
4947 | return IPR_RC_JOB_CONTINUE; | |
4948 | } | |
4949 | ||
4950 | if (ipr_set_pcix_cmd_reg(ioa_cfg)) { | |
4951 | ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); | |
4952 | return IPR_RC_JOB_CONTINUE; | |
4953 | } | |
4954 | ||
4955 | ipr_fail_all_ops(ioa_cfg); | |
4956 | ||
4957 | if (ioa_cfg->ioa_unit_checked) { | |
4958 | ioa_cfg->ioa_unit_checked = 0; | |
4959 | ipr_get_unit_check_buffer(ioa_cfg); | |
4960 | ipr_cmd->job_step = ipr_reset_alert; | |
4961 | ipr_reset_start_timer(ipr_cmd, 0); | |
4962 | return IPR_RC_JOB_RETURN; | |
4963 | } | |
4964 | ||
4965 | if (ioa_cfg->in_ioa_bringdown) { | |
4966 | ipr_cmd->job_step = ipr_ioa_bringdown_done; | |
4967 | } else { | |
4968 | ipr_cmd->job_step = ipr_reset_enable_ioa; | |
4969 | ||
4970 | if (GET_DUMP == ioa_cfg->sdt_state) { | |
4971 | ipr_reset_start_timer(ipr_cmd, IPR_DUMP_TIMEOUT); | |
4972 | ipr_cmd->job_step = ipr_reset_wait_for_dump; | |
4973 | schedule_work(&ioa_cfg->work_q); | |
4974 | return IPR_RC_JOB_RETURN; | |
4975 | } | |
4976 | } | |
4977 | ||
4978 | ENTER; | |
4979 | return IPR_RC_JOB_CONTINUE; | |
4980 | } | |
4981 | ||
4982 | /** | |
4983 | * ipr_reset_start_bist - Run BIST on the adapter. | |
4984 | * @ipr_cmd: ipr command struct | |
4985 | * | |
4986 | * Description: This function runs BIST on the adapter, then delays 2 seconds. | |
4987 | * | |
4988 | * Return value: | |
4989 | * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | |
4990 | **/ | |
4991 | static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd) | |
4992 | { | |
4993 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
4994 | int rc; | |
4995 | ||
4996 | ENTER; | |
b30197d2 | 4997 | pci_block_user_cfg_access(ioa_cfg->pdev); |
1da177e4 LT |
4998 | rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START); |
4999 | ||
5000 | if (rc != PCIBIOS_SUCCESSFUL) { | |
5001 | ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); | |
5002 | rc = IPR_RC_JOB_CONTINUE; | |
5003 | } else { | |
5004 | ipr_cmd->job_step = ipr_reset_restore_cfg_space; | |
5005 | ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT); | |
5006 | rc = IPR_RC_JOB_RETURN; | |
5007 | } | |
5008 | ||
5009 | LEAVE; | |
5010 | return rc; | |
5011 | } | |
5012 | ||
5013 | /** | |
5014 | * ipr_reset_allowed - Query whether or not IOA can be reset | |
5015 | * @ioa_cfg: ioa config struct | |
5016 | * | |
5017 | * Return value: | |
5018 | * 0 if reset not allowed / non-zero if reset is allowed | |
5019 | **/ | |
5020 | static int ipr_reset_allowed(struct ipr_ioa_cfg *ioa_cfg) | |
5021 | { | |
5022 | volatile u32 temp_reg; | |
5023 | ||
5024 | temp_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | |
5025 | return ((temp_reg & IPR_PCII_CRITICAL_OPERATION) == 0); | |
5026 | } | |
5027 | ||
5028 | /** | |
5029 | * ipr_reset_wait_to_start_bist - Wait for permission to reset IOA. | |
5030 | * @ipr_cmd: ipr command struct | |
5031 | * | |
5032 | * Description: This function waits for adapter permission to run BIST, | |
5033 | * then runs BIST. If the adapter does not give permission after a | |
5034 | * reasonable time, we will reset the adapter anyway. The impact of | |
5035 | * resetting the adapter without warning the adapter is the risk of | |
5036 | * losing the persistent error log on the adapter. If the adapter is | |
5037 | * reset while it is writing to the flash on the adapter, the flash | |
5038 | * segment will have bad ECC and be zeroed. | |
5039 | * | |
5040 | * Return value: | |
5041 | * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | |
5042 | **/ | |
5043 | static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd) | |
5044 | { | |
5045 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
5046 | int rc = IPR_RC_JOB_RETURN; | |
5047 | ||
5048 | if (!ipr_reset_allowed(ioa_cfg) && ipr_cmd->u.time_left) { | |
5049 | ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT; | |
5050 | ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT); | |
5051 | } else { | |
5052 | ipr_cmd->job_step = ipr_reset_start_bist; | |
5053 | rc = IPR_RC_JOB_CONTINUE; | |
5054 | } | |
5055 | ||
5056 | return rc; | |
5057 | } | |
5058 | ||
5059 | /** | |
5060 | * ipr_reset_alert_part2 - Alert the adapter of a pending reset | |
5061 | * @ipr_cmd: ipr command struct | |
5062 | * | |
5063 | * Description: This function alerts the adapter that it will be reset. | |
5064 | * If memory space is not currently enabled, proceed directly | |
5065 | * to running BIST on the adapter. The timer must always be started | |
5066 | * so we guarantee we do not run BIST from ipr_isr. | |
5067 | * | |
5068 | * Return value: | |
5069 | * IPR_RC_JOB_RETURN | |
5070 | **/ | |
5071 | static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd) | |
5072 | { | |
5073 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
5074 | u16 cmd_reg; | |
5075 | int rc; | |
5076 | ||
5077 | ENTER; | |
5078 | rc = pci_read_config_word(ioa_cfg->pdev, PCI_COMMAND, &cmd_reg); | |
5079 | ||
5080 | if ((rc == PCIBIOS_SUCCESSFUL) && (cmd_reg & PCI_COMMAND_MEMORY)) { | |
5081 | ipr_mask_and_clear_interrupts(ioa_cfg, ~0); | |
5082 | writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg); | |
5083 | ipr_cmd->job_step = ipr_reset_wait_to_start_bist; | |
5084 | } else { | |
5085 | ipr_cmd->job_step = ipr_reset_start_bist; | |
5086 | } | |
5087 | ||
5088 | ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT; | |
5089 | ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT); | |
5090 | ||
5091 | LEAVE; | |
5092 | return IPR_RC_JOB_RETURN; | |
5093 | } | |
5094 | ||
5095 | /** | |
5096 | * ipr_reset_ucode_download_done - Microcode download completion | |
5097 | * @ipr_cmd: ipr command struct | |
5098 | * | |
5099 | * Description: This function unmaps the microcode download buffer. | |
5100 | * | |
5101 | * Return value: | |
5102 | * IPR_RC_JOB_CONTINUE | |
5103 | **/ | |
5104 | static int ipr_reset_ucode_download_done(struct ipr_cmnd *ipr_cmd) | |
5105 | { | |
5106 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
5107 | struct ipr_sglist *sglist = ioa_cfg->ucode_sglist; | |
5108 | ||
5109 | pci_unmap_sg(ioa_cfg->pdev, sglist->scatterlist, | |
5110 | sglist->num_sg, DMA_TO_DEVICE); | |
5111 | ||
5112 | ipr_cmd->job_step = ipr_reset_alert; | |
5113 | return IPR_RC_JOB_CONTINUE; | |
5114 | } | |
5115 | ||
5116 | /** | |
5117 | * ipr_reset_ucode_download - Download microcode to the adapter | |
5118 | * @ipr_cmd: ipr command struct | |
5119 | * | |
5120 | * Description: This function checks to see if it there is microcode | |
5121 | * to download to the adapter. If there is, a download is performed. | |
5122 | * | |
5123 | * Return value: | |
5124 | * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | |
5125 | **/ | |
5126 | static int ipr_reset_ucode_download(struct ipr_cmnd *ipr_cmd) | |
5127 | { | |
5128 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
5129 | struct ipr_sglist *sglist = ioa_cfg->ucode_sglist; | |
5130 | ||
5131 | ENTER; | |
5132 | ipr_cmd->job_step = ipr_reset_alert; | |
5133 | ||
5134 | if (!sglist) | |
5135 | return IPR_RC_JOB_CONTINUE; | |
5136 | ||
5137 | ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | |
5138 | ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | |
5139 | ipr_cmd->ioarcb.cmd_pkt.cdb[0] = WRITE_BUFFER; | |
5140 | ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_WR_BUF_DOWNLOAD_AND_SAVE; | |
5141 | ipr_cmd->ioarcb.cmd_pkt.cdb[6] = (sglist->buffer_len & 0xff0000) >> 16; | |
5142 | ipr_cmd->ioarcb.cmd_pkt.cdb[7] = (sglist->buffer_len & 0x00ff00) >> 8; | |
5143 | ipr_cmd->ioarcb.cmd_pkt.cdb[8] = sglist->buffer_len & 0x0000ff; | |
5144 | ||
5145 | if (ipr_map_ucode_buffer(ipr_cmd, sglist, sglist->buffer_len)) { | |
5146 | dev_err(&ioa_cfg->pdev->dev, | |
5147 | "Failed to map microcode download buffer\n"); | |
5148 | return IPR_RC_JOB_CONTINUE; | |
5149 | } | |
5150 | ||
5151 | ipr_cmd->job_step = ipr_reset_ucode_download_done; | |
5152 | ||
5153 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, | |
5154 | IPR_WRITE_BUFFER_TIMEOUT); | |
5155 | ||
5156 | LEAVE; | |
5157 | return IPR_RC_JOB_RETURN; | |
5158 | } | |
5159 | ||
5160 | /** | |
5161 | * ipr_reset_shutdown_ioa - Shutdown the adapter | |
5162 | * @ipr_cmd: ipr command struct | |
5163 | * | |
5164 | * Description: This function issues an adapter shutdown of the | |
5165 | * specified type to the specified adapter as part of the | |
5166 | * adapter reset job. | |
5167 | * | |
5168 | * Return value: | |
5169 | * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | |
5170 | **/ | |
5171 | static int ipr_reset_shutdown_ioa(struct ipr_cmnd *ipr_cmd) | |
5172 | { | |
5173 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
5174 | enum ipr_shutdown_type shutdown_type = ipr_cmd->u.shutdown_type; | |
5175 | unsigned long timeout; | |
5176 | int rc = IPR_RC_JOB_CONTINUE; | |
5177 | ||
5178 | ENTER; | |
5179 | if (shutdown_type != IPR_SHUTDOWN_NONE && !ioa_cfg->ioa_is_dead) { | |
5180 | ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | |
5181 | ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | |
5182 | ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN; | |
5183 | ipr_cmd->ioarcb.cmd_pkt.cdb[1] = shutdown_type; | |
5184 | ||
5185 | if (shutdown_type == IPR_SHUTDOWN_ABBREV) | |
5186 | timeout = IPR_ABBREV_SHUTDOWN_TIMEOUT; | |
5187 | else if (shutdown_type == IPR_SHUTDOWN_PREPARE_FOR_NORMAL) | |
5188 | timeout = IPR_INTERNAL_TIMEOUT; | |
5189 | else | |
5190 | timeout = IPR_SHUTDOWN_TIMEOUT; | |
5191 | ||
5192 | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, timeout); | |
5193 | ||
5194 | rc = IPR_RC_JOB_RETURN; | |
5195 | ipr_cmd->job_step = ipr_reset_ucode_download; | |
5196 | } else | |
5197 | ipr_cmd->job_step = ipr_reset_alert; | |
5198 | ||
5199 | LEAVE; | |
5200 | return rc; | |
5201 | } | |
5202 | ||
5203 | /** | |
5204 | * ipr_reset_ioa_job - Adapter reset job | |
5205 | * @ipr_cmd: ipr command struct | |
5206 | * | |
5207 | * Description: This function is the job router for the adapter reset job. | |
5208 | * | |
5209 | * Return value: | |
5210 | * none | |
5211 | **/ | |
5212 | static void ipr_reset_ioa_job(struct ipr_cmnd *ipr_cmd) | |
5213 | { | |
5214 | u32 rc, ioasc; | |
5215 | unsigned long scratch = ipr_cmd->u.scratch; | |
5216 | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | |
5217 | ||
5218 | do { | |
5219 | ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); | |
5220 | ||
5221 | if (ioa_cfg->reset_cmd != ipr_cmd) { | |
5222 | /* | |
5223 | * We are doing nested adapter resets and this is | |
5224 | * not the current reset job. | |
5225 | */ | |
5226 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
5227 | return; | |
5228 | } | |
5229 | ||
5230 | if (IPR_IOASC_SENSE_KEY(ioasc)) { | |
5231 | dev_err(&ioa_cfg->pdev->dev, | |
5232 | "0x%02X failed with IOASC: 0x%08X\n", | |
5233 | ipr_cmd->ioarcb.cmd_pkt.cdb[0], ioasc); | |
5234 | ||
5235 | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | |
5236 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
5237 | return; | |
5238 | } | |
5239 | ||
5240 | ipr_reinit_ipr_cmnd(ipr_cmd); | |
5241 | ipr_cmd->u.scratch = scratch; | |
5242 | rc = ipr_cmd->job_step(ipr_cmd); | |
5243 | } while(rc == IPR_RC_JOB_CONTINUE); | |
5244 | } | |
5245 | ||
5246 | /** | |
5247 | * _ipr_initiate_ioa_reset - Initiate an adapter reset | |
5248 | * @ioa_cfg: ioa config struct | |
5249 | * @job_step: first job step of reset job | |
5250 | * @shutdown_type: shutdown type | |
5251 | * | |
5252 | * Description: This function will initiate the reset of the given adapter | |
5253 | * starting at the selected job step. | |
5254 | * If the caller needs to wait on the completion of the reset, | |
5255 | * the caller must sleep on the reset_wait_q. | |
5256 | * | |
5257 | * Return value: | |
5258 | * none | |
5259 | **/ | |
5260 | static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg, | |
5261 | int (*job_step) (struct ipr_cmnd *), | |
5262 | enum ipr_shutdown_type shutdown_type) | |
5263 | { | |
5264 | struct ipr_cmnd *ipr_cmd; | |
5265 | ||
5266 | ioa_cfg->in_reset_reload = 1; | |
5267 | ioa_cfg->allow_cmds = 0; | |
5268 | scsi_block_requests(ioa_cfg->host); | |
5269 | ||
5270 | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | |
5271 | ioa_cfg->reset_cmd = ipr_cmd; | |
5272 | ipr_cmd->job_step = job_step; | |
5273 | ipr_cmd->u.shutdown_type = shutdown_type; | |
5274 | ||
5275 | ipr_reset_ioa_job(ipr_cmd); | |
5276 | } | |
5277 | ||
5278 | /** | |
5279 | * ipr_initiate_ioa_reset - Initiate an adapter reset | |
5280 | * @ioa_cfg: ioa config struct | |
5281 | * @shutdown_type: shutdown type | |
5282 | * | |
5283 | * Description: This function will initiate the reset of the given adapter. | |
5284 | * If the caller needs to wait on the completion of the reset, | |
5285 | * the caller must sleep on the reset_wait_q. | |
5286 | * | |
5287 | * Return value: | |
5288 | * none | |
5289 | **/ | |
5290 | static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg, | |
5291 | enum ipr_shutdown_type shutdown_type) | |
5292 | { | |
5293 | if (ioa_cfg->ioa_is_dead) | |
5294 | return; | |
5295 | ||
5296 | if (ioa_cfg->in_reset_reload && ioa_cfg->sdt_state == GET_DUMP) | |
5297 | ioa_cfg->sdt_state = ABORT_DUMP; | |
5298 | ||
5299 | if (ioa_cfg->reset_retries++ >= IPR_NUM_RESET_RELOAD_RETRIES) { | |
5300 | dev_err(&ioa_cfg->pdev->dev, | |
5301 | "IOA taken offline - error recovery failed\n"); | |
5302 | ||
5303 | ioa_cfg->reset_retries = 0; | |
5304 | ioa_cfg->ioa_is_dead = 1; | |
5305 | ||
5306 | if (ioa_cfg->in_ioa_bringdown) { | |
5307 | ioa_cfg->reset_cmd = NULL; | |
5308 | ioa_cfg->in_reset_reload = 0; | |
5309 | ipr_fail_all_ops(ioa_cfg); | |
5310 | wake_up_all(&ioa_cfg->reset_wait_q); | |
5311 | ||
5312 | spin_unlock_irq(ioa_cfg->host->host_lock); | |
5313 | scsi_unblock_requests(ioa_cfg->host); | |
5314 | spin_lock_irq(ioa_cfg->host->host_lock); | |
5315 | return; | |
5316 | } else { | |
5317 | ioa_cfg->in_ioa_bringdown = 1; | |
5318 | shutdown_type = IPR_SHUTDOWN_NONE; | |
5319 | } | |
5320 | } | |
5321 | ||
5322 | _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_shutdown_ioa, | |
5323 | shutdown_type); | |
5324 | } | |
5325 | ||
5326 | /** | |
5327 | * ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..) | |
5328 | * @ioa_cfg: ioa cfg struct | |
5329 | * | |
5330 | * Description: This is the second phase of adapter intialization | |
5331 | * This function takes care of initilizing the adapter to the point | |
5332 | * where it can accept new commands. | |
5333 | ||
5334 | * Return value: | |
5335 | * 0 on sucess / -EIO on failure | |
5336 | **/ | |
5337 | static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg) | |
5338 | { | |
5339 | int rc = 0; | |
5340 | unsigned long host_lock_flags = 0; | |
5341 | ||
5342 | ENTER; | |
5343 | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | |
5344 | dev_dbg(&ioa_cfg->pdev->dev, "ioa_cfg adx: 0x%p\n", ioa_cfg); | |
5345 | _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa, IPR_SHUTDOWN_NONE); | |
5346 | ||
5347 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | |
5348 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
5349 | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | |
5350 | ||
5351 | if (ioa_cfg->ioa_is_dead) { | |
5352 | rc = -EIO; | |
5353 | } else if (ipr_invalid_adapter(ioa_cfg)) { | |
5354 | if (!ipr_testmode) | |
5355 | rc = -EIO; | |
5356 | ||
5357 | dev_err(&ioa_cfg->pdev->dev, | |
5358 | "Adapter not supported in this hardware configuration.\n"); | |
5359 | } | |
5360 | ||
5361 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | |
5362 | ||
5363 | LEAVE; | |
5364 | return rc; | |
5365 | } | |
5366 | ||
5367 | /** | |
5368 | * ipr_free_cmd_blks - Frees command blocks allocated for an adapter | |
5369 | * @ioa_cfg: ioa config struct | |
5370 | * | |
5371 | * Return value: | |
5372 | * none | |
5373 | **/ | |
5374 | static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) | |
5375 | { | |
5376 | int i; | |
5377 | ||
5378 | for (i = 0; i < IPR_NUM_CMD_BLKS; i++) { | |
5379 | if (ioa_cfg->ipr_cmnd_list[i]) | |
5380 | pci_pool_free(ioa_cfg->ipr_cmd_pool, | |
5381 | ioa_cfg->ipr_cmnd_list[i], | |
5382 | ioa_cfg->ipr_cmnd_list_dma[i]); | |
5383 | ||
5384 | ioa_cfg->ipr_cmnd_list[i] = NULL; | |
5385 | } | |
5386 | ||
5387 | if (ioa_cfg->ipr_cmd_pool) | |
5388 | pci_pool_destroy (ioa_cfg->ipr_cmd_pool); | |
5389 | ||
5390 | ioa_cfg->ipr_cmd_pool = NULL; | |
5391 | } | |
5392 | ||
5393 | /** | |
5394 | * ipr_free_mem - Frees memory allocated for an adapter | |
5395 | * @ioa_cfg: ioa cfg struct | |
5396 | * | |
5397 | * Return value: | |
5398 | * nothing | |
5399 | **/ | |
5400 | static void ipr_free_mem(struct ipr_ioa_cfg *ioa_cfg) | |
5401 | { | |
5402 | int i; | |
5403 | ||
5404 | kfree(ioa_cfg->res_entries); | |
5405 | pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_misc_cbs), | |
5406 | ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma); | |
5407 | ipr_free_cmd_blks(ioa_cfg); | |
5408 | pci_free_consistent(ioa_cfg->pdev, sizeof(u32) * IPR_NUM_CMD_BLKS, | |
5409 | ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma); | |
5410 | pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_config_table), | |
5411 | ioa_cfg->cfg_table, | |
5412 | ioa_cfg->cfg_table_dma); | |
5413 | ||
5414 | for (i = 0; i < IPR_NUM_HCAMS; i++) { | |
5415 | pci_free_consistent(ioa_cfg->pdev, | |
5416 | sizeof(struct ipr_hostrcb), | |
5417 | ioa_cfg->hostrcb[i], | |
5418 | ioa_cfg->hostrcb_dma[i]); | |
5419 | } | |
5420 | ||
5421 | ipr_free_dump(ioa_cfg); | |
5422 | kfree(ioa_cfg->saved_mode_pages); | |
5423 | kfree(ioa_cfg->trace); | |
5424 | } | |
5425 | ||
5426 | /** | |
5427 | * ipr_free_all_resources - Free all allocated resources for an adapter. | |
5428 | * @ipr_cmd: ipr command struct | |
5429 | * | |
5430 | * This function frees all allocated resources for the | |
5431 | * specified adapter. | |
5432 | * | |
5433 | * Return value: | |
5434 | * none | |
5435 | **/ | |
5436 | static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg) | |
5437 | { | |
5438 | struct pci_dev *pdev = ioa_cfg->pdev; | |
5439 | ||
5440 | ENTER; | |
5441 | free_irq(pdev->irq, ioa_cfg); | |
5442 | iounmap(ioa_cfg->hdw_dma_regs); | |
5443 | pci_release_regions(pdev); | |
5444 | ipr_free_mem(ioa_cfg); | |
5445 | scsi_host_put(ioa_cfg->host); | |
5446 | pci_disable_device(pdev); | |
5447 | LEAVE; | |
5448 | } | |
5449 | ||
5450 | /** | |
5451 | * ipr_alloc_cmd_blks - Allocate command blocks for an adapter | |
5452 | * @ioa_cfg: ioa config struct | |
5453 | * | |
5454 | * Return value: | |
5455 | * 0 on success / -ENOMEM on allocation failure | |
5456 | **/ | |
5457 | static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) | |
5458 | { | |
5459 | struct ipr_cmnd *ipr_cmd; | |
5460 | struct ipr_ioarcb *ioarcb; | |
5461 | dma_addr_t dma_addr; | |
5462 | int i; | |
5463 | ||
5464 | ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev, | |
5465 | sizeof(struct ipr_cmnd), 8, 0); | |
5466 | ||
5467 | if (!ioa_cfg->ipr_cmd_pool) | |
5468 | return -ENOMEM; | |
5469 | ||
5470 | for (i = 0; i < IPR_NUM_CMD_BLKS; i++) { | |
5471 | ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, SLAB_KERNEL, &dma_addr); | |
5472 | ||
5473 | if (!ipr_cmd) { | |
5474 | ipr_free_cmd_blks(ioa_cfg); | |
5475 | return -ENOMEM; | |
5476 | } | |
5477 | ||
5478 | memset(ipr_cmd, 0, sizeof(*ipr_cmd)); | |
5479 | ioa_cfg->ipr_cmnd_list[i] = ipr_cmd; | |
5480 | ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr; | |
5481 | ||
5482 | ioarcb = &ipr_cmd->ioarcb; | |
5483 | ioarcb->ioarcb_host_pci_addr = cpu_to_be32(dma_addr); | |
5484 | ioarcb->host_response_handle = cpu_to_be32(i << 2); | |
5485 | ioarcb->write_ioadl_addr = | |
5486 | cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl)); | |
5487 | ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr; | |
5488 | ioarcb->ioasa_host_pci_addr = | |
5489 | cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioasa)); | |
5490 | ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa)); | |
5491 | ipr_cmd->cmd_index = i; | |
5492 | ipr_cmd->ioa_cfg = ioa_cfg; | |
5493 | ipr_cmd->sense_buffer_dma = dma_addr + | |
5494 | offsetof(struct ipr_cmnd, sense_buffer); | |
5495 | ||
5496 | list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); | |
5497 | } | |
5498 | ||
5499 | return 0; | |
5500 | } | |
5501 | ||
5502 | /** | |
5503 | * ipr_alloc_mem - Allocate memory for an adapter | |
5504 | * @ioa_cfg: ioa config struct | |
5505 | * | |
5506 | * Return value: | |
5507 | * 0 on success / non-zero for error | |
5508 | **/ | |
5509 | static int __devinit ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg) | |
5510 | { | |
5511 | struct pci_dev *pdev = ioa_cfg->pdev; | |
5512 | int i, rc = -ENOMEM; | |
5513 | ||
5514 | ENTER; | |
5515 | ioa_cfg->res_entries = kmalloc(sizeof(struct ipr_resource_entry) * | |
5516 | IPR_MAX_PHYSICAL_DEVS, GFP_KERNEL); | |
5517 | ||
5518 | if (!ioa_cfg->res_entries) | |
5519 | goto out; | |
5520 | ||
5521 | memset(ioa_cfg->res_entries, 0, | |
5522 | sizeof(struct ipr_resource_entry) * IPR_MAX_PHYSICAL_DEVS); | |
5523 | ||
5524 | for (i = 0; i < IPR_MAX_PHYSICAL_DEVS; i++) | |
5525 | list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q); | |
5526 | ||
5527 | ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev, | |
5528 | sizeof(struct ipr_misc_cbs), | |
5529 | &ioa_cfg->vpd_cbs_dma); | |
5530 | ||
5531 | if (!ioa_cfg->vpd_cbs) | |
5532 | goto out_free_res_entries; | |
5533 | ||
5534 | if (ipr_alloc_cmd_blks(ioa_cfg)) | |
5535 | goto out_free_vpd_cbs; | |
5536 | ||
5537 | ioa_cfg->host_rrq = pci_alloc_consistent(ioa_cfg->pdev, | |
5538 | sizeof(u32) * IPR_NUM_CMD_BLKS, | |
5539 | &ioa_cfg->host_rrq_dma); | |
5540 | ||
5541 | if (!ioa_cfg->host_rrq) | |
5542 | goto out_ipr_free_cmd_blocks; | |
5543 | ||
5544 | ioa_cfg->cfg_table = pci_alloc_consistent(ioa_cfg->pdev, | |
5545 | sizeof(struct ipr_config_table), | |
5546 | &ioa_cfg->cfg_table_dma); | |
5547 | ||
5548 | if (!ioa_cfg->cfg_table) | |
5549 | goto out_free_host_rrq; | |
5550 | ||
5551 | for (i = 0; i < IPR_NUM_HCAMS; i++) { | |
5552 | ioa_cfg->hostrcb[i] = pci_alloc_consistent(ioa_cfg->pdev, | |
5553 | sizeof(struct ipr_hostrcb), | |
5554 | &ioa_cfg->hostrcb_dma[i]); | |
5555 | ||
5556 | if (!ioa_cfg->hostrcb[i]) | |
5557 | goto out_free_hostrcb_dma; | |
5558 | ||
5559 | ioa_cfg->hostrcb[i]->hostrcb_dma = | |
5560 | ioa_cfg->hostrcb_dma[i] + offsetof(struct ipr_hostrcb, hcam); | |
5561 | list_add_tail(&ioa_cfg->hostrcb[i]->queue, &ioa_cfg->hostrcb_free_q); | |
5562 | } | |
5563 | ||
5564 | ioa_cfg->trace = kmalloc(sizeof(struct ipr_trace_entry) * | |
5565 | IPR_NUM_TRACE_ENTRIES, GFP_KERNEL); | |
5566 | ||
5567 | if (!ioa_cfg->trace) | |
5568 | goto out_free_hostrcb_dma; | |
5569 | ||
5570 | memset(ioa_cfg->trace, 0, | |
5571 | sizeof(struct ipr_trace_entry) * IPR_NUM_TRACE_ENTRIES); | |
5572 | ||
5573 | rc = 0; | |
5574 | out: | |
5575 | LEAVE; | |
5576 | return rc; | |
5577 | ||
5578 | out_free_hostrcb_dma: | |
5579 | while (i-- > 0) { | |
5580 | pci_free_consistent(pdev, sizeof(struct ipr_hostrcb), | |
5581 | ioa_cfg->hostrcb[i], | |
5582 | ioa_cfg->hostrcb_dma[i]); | |
5583 | } | |
5584 | pci_free_consistent(pdev, sizeof(struct ipr_config_table), | |
5585 | ioa_cfg->cfg_table, ioa_cfg->cfg_table_dma); | |
5586 | out_free_host_rrq: | |
5587 | pci_free_consistent(pdev, sizeof(u32) * IPR_NUM_CMD_BLKS, | |
5588 | ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma); | |
5589 | out_ipr_free_cmd_blocks: | |
5590 | ipr_free_cmd_blks(ioa_cfg); | |
5591 | out_free_vpd_cbs: | |
5592 | pci_free_consistent(pdev, sizeof(struct ipr_misc_cbs), | |
5593 | ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma); | |
5594 | out_free_res_entries: | |
5595 | kfree(ioa_cfg->res_entries); | |
5596 | goto out; | |
5597 | } | |
5598 | ||
5599 | /** | |
5600 | * ipr_initialize_bus_attr - Initialize SCSI bus attributes to default values | |
5601 | * @ioa_cfg: ioa config struct | |
5602 | * | |
5603 | * Return value: | |
5604 | * none | |
5605 | **/ | |
5606 | static void __devinit ipr_initialize_bus_attr(struct ipr_ioa_cfg *ioa_cfg) | |
5607 | { | |
5608 | int i; | |
5609 | ||
5610 | for (i = 0; i < IPR_MAX_NUM_BUSES; i++) { | |
5611 | ioa_cfg->bus_attr[i].bus = i; | |
5612 | ioa_cfg->bus_attr[i].qas_enabled = 0; | |
5613 | ioa_cfg->bus_attr[i].bus_width = IPR_DEFAULT_BUS_WIDTH; | |
5614 | if (ipr_max_speed < ARRAY_SIZE(ipr_max_bus_speeds)) | |
5615 | ioa_cfg->bus_attr[i].max_xfer_rate = ipr_max_bus_speeds[ipr_max_speed]; | |
5616 | else | |
5617 | ioa_cfg->bus_attr[i].max_xfer_rate = IPR_U160_SCSI_RATE; | |
5618 | } | |
5619 | } | |
5620 | ||
5621 | /** | |
5622 | * ipr_init_ioa_cfg - Initialize IOA config struct | |
5623 | * @ioa_cfg: ioa config struct | |
5624 | * @host: scsi host struct | |
5625 | * @pdev: PCI dev struct | |
5626 | * | |
5627 | * Return value: | |
5628 | * none | |
5629 | **/ | |
5630 | static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg, | |
5631 | struct Scsi_Host *host, struct pci_dev *pdev) | |
5632 | { | |
5633 | const struct ipr_interrupt_offsets *p; | |
5634 | struct ipr_interrupts *t; | |
5635 | void __iomem *base; | |
5636 | ||
5637 | ioa_cfg->host = host; | |
5638 | ioa_cfg->pdev = pdev; | |
5639 | ioa_cfg->log_level = ipr_log_level; | |
5640 | sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER); | |
5641 | sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL); | |
5642 | sprintf(ioa_cfg->ipr_free_label, IPR_FREEQ_LABEL); | |
5643 | sprintf(ioa_cfg->ipr_pending_label, IPR_PENDQ_LABEL); | |
5644 | sprintf(ioa_cfg->cfg_table_start, IPR_CFG_TBL_START); | |
5645 | sprintf(ioa_cfg->resource_table_label, IPR_RES_TABLE_LABEL); | |
5646 | sprintf(ioa_cfg->ipr_hcam_label, IPR_HCAM_LABEL); | |
5647 | sprintf(ioa_cfg->ipr_cmd_label, IPR_CMD_LABEL); | |
5648 | ||
5649 | INIT_LIST_HEAD(&ioa_cfg->free_q); | |
5650 | INIT_LIST_HEAD(&ioa_cfg->pending_q); | |
5651 | INIT_LIST_HEAD(&ioa_cfg->hostrcb_free_q); | |
5652 | INIT_LIST_HEAD(&ioa_cfg->hostrcb_pending_q); | |
5653 | INIT_LIST_HEAD(&ioa_cfg->free_res_q); | |
5654 | INIT_LIST_HEAD(&ioa_cfg->used_res_q); | |
5655 | INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread, ioa_cfg); | |
5656 | init_waitqueue_head(&ioa_cfg->reset_wait_q); | |
5657 | ioa_cfg->sdt_state = INACTIVE; | |
5658 | ||
5659 | ipr_initialize_bus_attr(ioa_cfg); | |
5660 | ||
5661 | host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS; | |
5662 | host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET; | |
5663 | host->max_channel = IPR_MAX_BUS_TO_SCAN; | |
5664 | host->unique_id = host->host_no; | |
5665 | host->max_cmd_len = IPR_MAX_CDB_LEN; | |
5666 | pci_set_drvdata(pdev, ioa_cfg); | |
5667 | ||
5668 | p = &ioa_cfg->chip_cfg->regs; | |
5669 | t = &ioa_cfg->regs; | |
5670 | base = ioa_cfg->hdw_dma_regs; | |
5671 | ||
5672 | t->set_interrupt_mask_reg = base + p->set_interrupt_mask_reg; | |
5673 | t->clr_interrupt_mask_reg = base + p->clr_interrupt_mask_reg; | |
5674 | t->sense_interrupt_mask_reg = base + p->sense_interrupt_mask_reg; | |
5675 | t->clr_interrupt_reg = base + p->clr_interrupt_reg; | |
5676 | t->sense_interrupt_reg = base + p->sense_interrupt_reg; | |
5677 | t->ioarrin_reg = base + p->ioarrin_reg; | |
5678 | t->sense_uproc_interrupt_reg = base + p->sense_uproc_interrupt_reg; | |
5679 | t->set_uproc_interrupt_reg = base + p->set_uproc_interrupt_reg; | |
5680 | t->clr_uproc_interrupt_reg = base + p->clr_uproc_interrupt_reg; | |
5681 | } | |
5682 | ||
5683 | /** | |
5684 | * ipr_get_chip_cfg - Find adapter chip configuration | |
5685 | * @dev_id: PCI device id struct | |
5686 | * | |
5687 | * Return value: | |
5688 | * ptr to chip config on success / NULL on failure | |
5689 | **/ | |
5690 | static const struct ipr_chip_cfg_t * __devinit | |
5691 | ipr_get_chip_cfg(const struct pci_device_id *dev_id) | |
5692 | { | |
5693 | int i; | |
5694 | ||
5695 | if (dev_id->driver_data) | |
5696 | return (const struct ipr_chip_cfg_t *)dev_id->driver_data; | |
5697 | ||
5698 | for (i = 0; i < ARRAY_SIZE(ipr_chip); i++) | |
5699 | if (ipr_chip[i].vendor == dev_id->vendor && | |
5700 | ipr_chip[i].device == dev_id->device) | |
5701 | return ipr_chip[i].cfg; | |
5702 | return NULL; | |
5703 | } | |
5704 | ||
5705 | /** | |
5706 | * ipr_probe_ioa - Allocates memory and does first stage of initialization | |
5707 | * @pdev: PCI device struct | |
5708 | * @dev_id: PCI device id struct | |
5709 | * | |
5710 | * Return value: | |
5711 | * 0 on success / non-zero on failure | |
5712 | **/ | |
5713 | static int __devinit ipr_probe_ioa(struct pci_dev *pdev, | |
5714 | const struct pci_device_id *dev_id) | |
5715 | { | |
5716 | struct ipr_ioa_cfg *ioa_cfg; | |
5717 | struct Scsi_Host *host; | |
5718 | unsigned long ipr_regs_pci; | |
5719 | void __iomem *ipr_regs; | |
5720 | u32 rc = PCIBIOS_SUCCESSFUL; | |
5721 | ||
5722 | ENTER; | |
5723 | ||
5724 | if ((rc = pci_enable_device(pdev))) { | |
5725 | dev_err(&pdev->dev, "Cannot enable adapter\n"); | |
5726 | goto out; | |
5727 | } | |
5728 | ||
5729 | dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq); | |
5730 | ||
5731 | host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg)); | |
5732 | ||
5733 | if (!host) { | |
5734 | dev_err(&pdev->dev, "call to scsi_host_alloc failed!\n"); | |
5735 | rc = -ENOMEM; | |
5736 | goto out_disable; | |
5737 | } | |
5738 | ||
5739 | ioa_cfg = (struct ipr_ioa_cfg *)host->hostdata; | |
5740 | memset(ioa_cfg, 0, sizeof(struct ipr_ioa_cfg)); | |
5741 | ||
5742 | ioa_cfg->chip_cfg = ipr_get_chip_cfg(dev_id); | |
5743 | ||
5744 | if (!ioa_cfg->chip_cfg) { | |
5745 | dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n", | |
5746 | dev_id->vendor, dev_id->device); | |
5747 | goto out_scsi_host_put; | |
5748 | } | |
5749 | ||
5750 | ipr_regs_pci = pci_resource_start(pdev, 0); | |
5751 | ||
5752 | rc = pci_request_regions(pdev, IPR_NAME); | |
5753 | if (rc < 0) { | |
5754 | dev_err(&pdev->dev, | |
5755 | "Couldn't register memory range of registers\n"); | |
5756 | goto out_scsi_host_put; | |
5757 | } | |
5758 | ||
5759 | ipr_regs = ioremap(ipr_regs_pci, pci_resource_len(pdev, 0)); | |
5760 | ||
5761 | if (!ipr_regs) { | |
5762 | dev_err(&pdev->dev, | |
5763 | "Couldn't map memory range of registers\n"); | |
5764 | rc = -ENOMEM; | |
5765 | goto out_release_regions; | |
5766 | } | |
5767 | ||
5768 | ioa_cfg->hdw_dma_regs = ipr_regs; | |
5769 | ioa_cfg->hdw_dma_regs_pci = ipr_regs_pci; | |
5770 | ioa_cfg->ioa_mailbox = ioa_cfg->chip_cfg->mailbox + ipr_regs; | |
5771 | ||
5772 | ipr_init_ioa_cfg(ioa_cfg, host, pdev); | |
5773 | ||
5774 | pci_set_master(pdev); | |
5775 | ||
5776 | rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | |
5777 | if (rc < 0) { | |
5778 | dev_err(&pdev->dev, "Failed to set PCI DMA mask\n"); | |
5779 | goto cleanup_nomem; | |
5780 | } | |
5781 | ||
5782 | rc = pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, | |
5783 | ioa_cfg->chip_cfg->cache_line_size); | |
5784 | ||
5785 | if (rc != PCIBIOS_SUCCESSFUL) { | |
5786 | dev_err(&pdev->dev, "Write of cache line size failed\n"); | |
5787 | rc = -EIO; | |
5788 | goto cleanup_nomem; | |
5789 | } | |
5790 | ||
5791 | /* Save away PCI config space for use following IOA reset */ | |
5792 | rc = pci_save_state(pdev); | |
5793 | ||
5794 | if (rc != PCIBIOS_SUCCESSFUL) { | |
5795 | dev_err(&pdev->dev, "Failed to save PCI config space\n"); | |
5796 | rc = -EIO; | |
5797 | goto cleanup_nomem; | |
5798 | } | |
5799 | ||
5800 | if ((rc = ipr_save_pcix_cmd_reg(ioa_cfg))) | |
5801 | goto cleanup_nomem; | |
5802 | ||
5803 | if ((rc = ipr_set_pcix_cmd_reg(ioa_cfg))) | |
5804 | goto cleanup_nomem; | |
5805 | ||
5806 | rc = ipr_alloc_mem(ioa_cfg); | |
5807 | if (rc < 0) { | |
5808 | dev_err(&pdev->dev, | |
5809 | "Couldn't allocate enough memory for device driver!\n"); | |
5810 | goto cleanup_nomem; | |
5811 | } | |
5812 | ||
5813 | ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER); | |
5814 | rc = request_irq(pdev->irq, ipr_isr, SA_SHIRQ, IPR_NAME, ioa_cfg); | |
5815 | ||
5816 | if (rc) { | |
5817 | dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n", | |
5818 | pdev->irq, rc); | |
5819 | goto cleanup_nolog; | |
5820 | } | |
5821 | ||
5822 | spin_lock(&ipr_driver_lock); | |
5823 | list_add_tail(&ioa_cfg->queue, &ipr_ioa_head); | |
5824 | spin_unlock(&ipr_driver_lock); | |
5825 | ||
5826 | LEAVE; | |
5827 | out: | |
5828 | return rc; | |
5829 | ||
5830 | cleanup_nolog: | |
5831 | ipr_free_mem(ioa_cfg); | |
5832 | cleanup_nomem: | |
5833 | iounmap(ipr_regs); | |
5834 | out_release_regions: | |
5835 | pci_release_regions(pdev); | |
5836 | out_scsi_host_put: | |
5837 | scsi_host_put(host); | |
5838 | out_disable: | |
5839 | pci_disable_device(pdev); | |
5840 | goto out; | |
5841 | } | |
5842 | ||
5843 | /** | |
5844 | * ipr_scan_vsets - Scans for VSET devices | |
5845 | * @ioa_cfg: ioa config struct | |
5846 | * | |
5847 | * Description: Since the VSET resources do not follow SAM in that we can have | |
5848 | * sparse LUNs with no LUN 0, we have to scan for these ourselves. | |
5849 | * | |
5850 | * Return value: | |
5851 | * none | |
5852 | **/ | |
5853 | static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg) | |
5854 | { | |
5855 | int target, lun; | |
5856 | ||
5857 | for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++) | |
5858 | for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++ ) | |
5859 | scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun); | |
5860 | } | |
5861 | ||
5862 | /** | |
5863 | * ipr_initiate_ioa_bringdown - Bring down an adapter | |
5864 | * @ioa_cfg: ioa config struct | |
5865 | * @shutdown_type: shutdown type | |
5866 | * | |
5867 | * Description: This function will initiate bringing down the adapter. | |
5868 | * This consists of issuing an IOA shutdown to the adapter | |
5869 | * to flush the cache, and running BIST. | |
5870 | * If the caller needs to wait on the completion of the reset, | |
5871 | * the caller must sleep on the reset_wait_q. | |
5872 | * | |
5873 | * Return value: | |
5874 | * none | |
5875 | **/ | |
5876 | static void ipr_initiate_ioa_bringdown(struct ipr_ioa_cfg *ioa_cfg, | |
5877 | enum ipr_shutdown_type shutdown_type) | |
5878 | { | |
5879 | ENTER; | |
5880 | if (ioa_cfg->sdt_state == WAIT_FOR_DUMP) | |
5881 | ioa_cfg->sdt_state = ABORT_DUMP; | |
5882 | ioa_cfg->reset_retries = 0; | |
5883 | ioa_cfg->in_ioa_bringdown = 1; | |
5884 | ipr_initiate_ioa_reset(ioa_cfg, shutdown_type); | |
5885 | LEAVE; | |
5886 | } | |
5887 | ||
5888 | /** | |
5889 | * __ipr_remove - Remove a single adapter | |
5890 | * @pdev: pci device struct | |
5891 | * | |
5892 | * Adapter hot plug remove entry point. | |
5893 | * | |
5894 | * Return value: | |
5895 | * none | |
5896 | **/ | |
5897 | static void __ipr_remove(struct pci_dev *pdev) | |
5898 | { | |
5899 | unsigned long host_lock_flags = 0; | |
5900 | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | |
5901 | ENTER; | |
5902 | ||
5903 | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | |
5904 | ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL); | |
5905 | ||
5906 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | |
5907 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
5cbf5eae | 5908 | flush_scheduled_work(); |
1da177e4 LT |
5909 | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); |
5910 | ||
5911 | spin_lock(&ipr_driver_lock); | |
5912 | list_del(&ioa_cfg->queue); | |
5913 | spin_unlock(&ipr_driver_lock); | |
5914 | ||
5915 | if (ioa_cfg->sdt_state == ABORT_DUMP) | |
5916 | ioa_cfg->sdt_state = WAIT_FOR_DUMP; | |
5917 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | |
5918 | ||
5919 | ipr_free_all_resources(ioa_cfg); | |
5920 | ||
5921 | LEAVE; | |
5922 | } | |
5923 | ||
5924 | /** | |
5925 | * ipr_remove - IOA hot plug remove entry point | |
5926 | * @pdev: pci device struct | |
5927 | * | |
5928 | * Adapter hot plug remove entry point. | |
5929 | * | |
5930 | * Return value: | |
5931 | * none | |
5932 | **/ | |
5933 | static void ipr_remove(struct pci_dev *pdev) | |
5934 | { | |
5935 | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | |
5936 | ||
5937 | ENTER; | |
5938 | ||
1da177e4 LT |
5939 | ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj, |
5940 | &ipr_trace_attr); | |
5941 | ipr_remove_dump_file(&ioa_cfg->host->shost_classdev.kobj, | |
5942 | &ipr_dump_attr); | |
5943 | scsi_remove_host(ioa_cfg->host); | |
5944 | ||
5945 | __ipr_remove(pdev); | |
5946 | ||
5947 | LEAVE; | |
5948 | } | |
5949 | ||
5950 | /** | |
5951 | * ipr_probe - Adapter hot plug add entry point | |
5952 | * | |
5953 | * Return value: | |
5954 | * 0 on success / non-zero on failure | |
5955 | **/ | |
5956 | static int __devinit ipr_probe(struct pci_dev *pdev, | |
5957 | const struct pci_device_id *dev_id) | |
5958 | { | |
5959 | struct ipr_ioa_cfg *ioa_cfg; | |
5960 | int rc; | |
5961 | ||
5962 | rc = ipr_probe_ioa(pdev, dev_id); | |
5963 | ||
5964 | if (rc) | |
5965 | return rc; | |
5966 | ||
5967 | ioa_cfg = pci_get_drvdata(pdev); | |
5968 | rc = ipr_probe_ioa_part2(ioa_cfg); | |
5969 | ||
5970 | if (rc) { | |
5971 | __ipr_remove(pdev); | |
5972 | return rc; | |
5973 | } | |
5974 | ||
5975 | rc = scsi_add_host(ioa_cfg->host, &pdev->dev); | |
5976 | ||
5977 | if (rc) { | |
5978 | __ipr_remove(pdev); | |
5979 | return rc; | |
5980 | } | |
5981 | ||
5982 | rc = ipr_create_trace_file(&ioa_cfg->host->shost_classdev.kobj, | |
5983 | &ipr_trace_attr); | |
5984 | ||
5985 | if (rc) { | |
5986 | scsi_remove_host(ioa_cfg->host); | |
5987 | __ipr_remove(pdev); | |
5988 | return rc; | |
5989 | } | |
5990 | ||
5991 | rc = ipr_create_dump_file(&ioa_cfg->host->shost_classdev.kobj, | |
5992 | &ipr_dump_attr); | |
5993 | ||
5994 | if (rc) { | |
5995 | ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj, | |
5996 | &ipr_trace_attr); | |
5997 | scsi_remove_host(ioa_cfg->host); | |
5998 | __ipr_remove(pdev); | |
5999 | return rc; | |
6000 | } | |
6001 | ||
6002 | scsi_scan_host(ioa_cfg->host); | |
6003 | ipr_scan_vsets(ioa_cfg); | |
6004 | scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN); | |
6005 | ioa_cfg->allow_ml_add_del = 1; | |
11cd8f12 | 6006 | ioa_cfg->host->max_channel = IPR_VSET_BUS; |
1da177e4 LT |
6007 | schedule_work(&ioa_cfg->work_q); |
6008 | return 0; | |
6009 | } | |
6010 | ||
6011 | /** | |
6012 | * ipr_shutdown - Shutdown handler. | |
d18c3db5 | 6013 | * @pdev: pci device struct |
1da177e4 LT |
6014 | * |
6015 | * This function is invoked upon system shutdown/reboot. It will issue | |
6016 | * an adapter shutdown to the adapter to flush the write cache. | |
6017 | * | |
6018 | * Return value: | |
6019 | * none | |
6020 | **/ | |
d18c3db5 | 6021 | static void ipr_shutdown(struct pci_dev *pdev) |
1da177e4 | 6022 | { |
d18c3db5 | 6023 | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); |
1da177e4 LT |
6024 | unsigned long lock_flags = 0; |
6025 | ||
6026 | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | |
6027 | ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL); | |
6028 | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | |
6029 | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | |
6030 | } | |
6031 | ||
6032 | static struct pci_device_id ipr_pci_table[] __devinitdata = { | |
6033 | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | |
6034 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702, | |
6035 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] }, | |
6036 | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | |
6037 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703, | |
6038 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] }, | |
6039 | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | |
6040 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D, | |
6041 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] }, | |
6042 | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | |
6043 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E, | |
6044 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] }, | |
6045 | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, | |
6046 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B, | |
6047 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] }, | |
6048 | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, | |
6049 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E, | |
6050 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] }, | |
6051 | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, | |
6052 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A, | |
6053 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] }, | |
6054 | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, | |
6055 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, | |
6056 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] }, | |
6057 | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, | |
6058 | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E, | |
6059 | 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] }, | |
6060 | { } | |
6061 | }; | |
6062 | MODULE_DEVICE_TABLE(pci, ipr_pci_table); | |
6063 | ||
6064 | static struct pci_driver ipr_driver = { | |
6065 | .name = IPR_NAME, | |
6066 | .id_table = ipr_pci_table, | |
6067 | .probe = ipr_probe, | |
6068 | .remove = ipr_remove, | |
d18c3db5 | 6069 | .shutdown = ipr_shutdown, |
1da177e4 LT |
6070 | }; |
6071 | ||
6072 | /** | |
6073 | * ipr_init - Module entry point | |
6074 | * | |
6075 | * Return value: | |
6076 | * 0 on success / negative value on failure | |
6077 | **/ | |
6078 | static int __init ipr_init(void) | |
6079 | { | |
6080 | ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n", | |
6081 | IPR_DRIVER_VERSION, IPR_DRIVER_DATE); | |
6082 | ||
6083 | return pci_module_init(&ipr_driver); | |
6084 | } | |
6085 | ||
6086 | /** | |
6087 | * ipr_exit - Module unload | |
6088 | * | |
6089 | * Module unload entry point. | |
6090 | * | |
6091 | * Return value: | |
6092 | * none | |
6093 | **/ | |
6094 | static void __exit ipr_exit(void) | |
6095 | { | |
6096 | pci_unregister_driver(&ipr_driver); | |
6097 | } | |
6098 | ||
6099 | module_init(ipr_init); | |
6100 | module_exit(ipr_exit); |