projects / linux-2.6 / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] ARM: RTC: allow driver methods to return error
[linux-2.6] / drivers / scsi / sym53c8xx_defs.h
CommitLineData
1da177e4
LT		 1/******************************************************************************
2** High Performance device driver for the Symbios 53C896 controller.
3**
4** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
5**
6** This driver also supports all the Symbios 53C8XX controller family,
7** except 53C810 revisions < 16, 53C825 revisions < 16 and all
8** revisions of 53C815 controllers.
9**
10** This driver is based on the Linux port of the FreeBSD ncr driver.
11**
12** Copyright (C) 1994 Wolfgang Stanglmeier
13**
14**-----------------------------------------------------------------------------
15**
16** This program is free software; you can redistribute it and/or modify
17** it under the terms of the GNU General Public License as published by
18** the Free Software Foundation; either version 2 of the License, or
19** (at your option) any later version.
20**
21** This program is distributed in the hope that it will be useful,
22** but WITHOUT ANY WARRANTY; without even the implied warranty of
23** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24** GNU General Public License for more details.
25**
26** You should have received a copy of the GNU General Public License
27** along with this program; if not, write to the Free Software
28** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29**
30**-----------------------------------------------------------------------------
31**
32** The Linux port of the FreeBSD ncr driver has been achieved in
33** november 1995 by:
34**
35** Gerard Roudier <groudier@free.fr>
36**
37** Being given that this driver originates from the FreeBSD version, and
38** in order to keep synergy on both, any suggested enhancements and corrections
39** received on Linux are automatically a potential candidate for the FreeBSD
40** version.
41**
42** The original driver has been written for 386bsd and FreeBSD by
43** Wolfgang Stanglmeier <wolf@cologne.de>
44** Stefan Esser <se@mi.Uni-Koeln.de>
45**
46**-----------------------------------------------------------------------------
47**
48** Major contributions:
49** --------------------
50**
51** NVRAM detection and reading.
52** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
53**
54** Added support for MIPS big endian systems.
55** Carsten Langgaard, carstenl@mips.com
56** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
57**
58** Added support for HP PARISC big endian systems.
59** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
60**
61*******************************************************************************
62*/
63
64#ifndef SYM53C8XX_DEFS_H
65#define SYM53C8XX_DEFS_H
66
67#include <linux/config.h>
68
69/*
70** If you want a driver as small as possible, donnot define the
71** following options.
72*/
73#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
74#define SCSI_NCR_DEBUG_INFO_SUPPORT
75
76/*
77** To disable integrity checking, do not define the
78** following option.
79*/
80#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
81# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
82#endif
83
84/* ---------------------------------------------------------------------
85** Take into account kernel configured parameters.
86** Most of these options can be overridden at startup by a command line.
87** ---------------------------------------------------------------------
88*/
89
90/*
91 * For Ultra2 and Ultra3 SCSI support option, use special features.
92 *
93 * Value (default) means:
94 * bit 0 : all features enabled, except:
95 * bit 1 : PCI Write And Invalidate.
96 * bit 2 : Data Phase Mismatch handling from SCRIPTS.
97 *
98 * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
99 * enabled by the driver.
100 */
101#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
102
103#define SCSI_NCR_MAX_SYNC (80)
104
105/*
106 * Allow tags from 2 to 256, default 8
107 */
108#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
109#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
110#define SCSI_NCR_MAX_TAGS (2)
111#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
112#define SCSI_NCR_MAX_TAGS (256)
113#else
114#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
115#endif
116#else
117#define SCSI_NCR_MAX_TAGS (8)
118#endif
119
120/*
121 * Allow tagged command queuing support if configured with default number
122 * of tags set to max (see above).
123 */
124#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
125#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
126#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
127#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
128#else
129#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
130#endif
131
132/*
133 * Immediate arbitration
134 */
135#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
136#define SCSI_NCR_IARB_SUPPORT
137#endif
138
139/*
140 * Sync transfer frequency at startup.
141 * Allow from 5Mhz to 80Mhz default 20 Mhz.
142 */
143#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
144#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
145#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
146#undef CONFIG_SCSI_NCR53C8XX_SYNC
147#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
148#endif
149
150#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
151#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
152#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
153#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
154#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
155#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
156#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
157#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
158#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
159#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
160#else
161#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
162#endif
163
164/*
165 * Disallow disconnections at boot-up
166 */
167#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
168#define SCSI_NCR_SETUP_DISCONNECTION (0)
169#else
170#define SCSI_NCR_SETUP_DISCONNECTION (1)
171#endif
172
173/*
174 * Force synchronous negotiation for all targets
175 */
176#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
177#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
178#else
179#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
180#endif
181
182/*
183 * Disable master parity checking (flawed hardwares need that)
184 */
185#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
186#define SCSI_NCR_SETUP_MASTER_PARITY (0)
187#else
188#define SCSI_NCR_SETUP_MASTER_PARITY (1)
189#endif
190
191/*
192 * Disable scsi parity checking (flawed devices may need that)
193 */
194#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
195#define SCSI_NCR_SETUP_SCSI_PARITY (0)
196#else
197#define SCSI_NCR_SETUP_SCSI_PARITY (1)
198#endif
199
200/*
201 * Settle time after reset at boot-up
202 */
203#define SCSI_NCR_SETUP_SETTLE_TIME (2)
204
205/*
206** Bridge quirks work-around option defaulted to 1.
207*/
208#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
209#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
210#endif
211
212/*
213** Work-around common bridge misbehaviour.
214**
215** - Do not flush posted writes in the opposite
216** direction on read.
217** - May reorder DMA writes to memory.
218**
219** This option should not affect performances
220** significantly, so it is the default.
221*/
222#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
223#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
224#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
225#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
226
227/*
228** Same as option 1, but also deal with
229** misconfigured interrupts.
230**
231** - Edge triggerred instead of level sensitive.
232** - No interrupt line connected.
233** - IRQ number misconfigured.
234**
235** If no interrupt is delivered, the driver will
236** catch the interrupt conditions 10 times per
237** second. No need to say that this option is
238** not recommended.
239*/
240#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
241#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
242#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
243#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
244#define SCSI_NCR_PCIQ_BROKEN_INTR
245
246/*
247** Some bridge designers decided to flush
248** everything prior to deliver the interrupt.
249** This option tries to deal with such a
250** behaviour.
251*/
252#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
253#define SCSI_NCR_PCIQ_SYNC_ON_INTR
254#endif
255
256/*
257** Other parameters not configurable with "make config"
258** Avoid to change these constants, unless you know what you are doing.
259*/
260
261#define SCSI_NCR_ALWAYS_SIMPLE_TAG
262#define SCSI_NCR_MAX_SCATTER (127)
263#define SCSI_NCR_MAX_TARGET (16)
264
265/*
266** Compute some desirable value for CAN_QUEUE
267** and CMD_PER_LUN.
268** The driver will use lower values if these
269** ones appear to be too large.
270*/
271#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
272#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
273
274#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
275#define SCSI_NCR_TIMER_INTERVAL (HZ)
276
277#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
278#define SCSI_NCR_MAX_LUN (16)
279#else
280#define SCSI_NCR_MAX_LUN (1)
281#endif
282
283/*
284** These simple macros limit expression involving
285** kernel time values (jiffies) to some that have
286** chance not to be too much incorrect. :-)
287*/
288#define ktime_get(o) (jiffies + (u_long) o)
289#define ktime_exp(b) ((long)(jiffies) - (long)(b) >= 0)
290#define ktime_dif(a, b) ((long)(a) - (long)(b))
291/* These ones are not used in this driver */
292#define ktime_add(a, o) ((a) + (u_long)(o))
293#define ktime_sub(a, o) ((a) - (u_long)(o))
294
295
296/*
297 * IO functions definition for big/little endian CPU support.
298 * For now, the NCR is only supported in little endian addressing mode,
299 */
300
301#ifdef __BIG_ENDIAN
302
303#define inw_l2b inw
304#define inl_l2b inl
305#define outw_b2l outw
306#define outl_b2l outl
307
308#define readb_raw readb
309#define writeb_raw writeb
310
311#if defined(SCSI_NCR_BIG_ENDIAN)
312#define readw_l2b __raw_readw
313#define readl_l2b __raw_readl
314#define writew_b2l __raw_writew
315#define writel_b2l __raw_writel
316#define readw_raw __raw_readw
317#define readl_raw __raw_readl
318#define writew_raw __raw_writew
319#define writel_raw __raw_writel
320#else /* Other big-endian */
321#define readw_l2b readw
322#define readl_l2b readl
323#define writew_b2l writew
324#define writel_b2l writel
325#define readw_raw readw
326#define readl_raw readl
327#define writew_raw writew
328#define writel_raw writel
329#endif
330
331#else /* little endian */
332
333#define inw_raw inw
334#define inl_raw inl
335#define outw_raw outw
336#define outl_raw outl
337
338#define readb_raw readb
339#define readw_raw readw
340#define readl_raw readl
341#define writeb_raw writeb
342#define writew_raw writew
343#define writel_raw writel
344
345#endif
346
347#if !defined(__hppa__) && !defined(__mips__)
348#ifdef SCSI_NCR_BIG_ENDIAN
349#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
350#endif
351#endif
352
353#define MEMORY_BARRIER() mb()
354
355
356/*
357 * If the NCR uses big endian addressing mode over the
358 * PCI, actual io register addresses for byte and word
359 * accesses must be changed according to lane routing.
360 * Btw, ncr_offb() and ncr_offw() macros only apply to
361 * constants and so donnot generate bloated code.
362 */
363
364#if defined(SCSI_NCR_BIG_ENDIAN)
365
366#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
367#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
368
369#else
370
371#define ncr_offb(o) (o)
372#define ncr_offw(o) (o)
373
374#endif
375
376/*
377 * If the CPU and the NCR use same endian-ness addressing,
378 * no byte reordering is needed for script patching.
379 * Macro cpu_to_scr() is to be used for script patching.
380 * Macro scr_to_cpu() is to be used for getting a DWORD
381 * from the script.
382 */
383
384#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
385
386#define cpu_to_scr(dw) cpu_to_le32(dw)
387#define scr_to_cpu(dw) le32_to_cpu(dw)
388
389#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
390
391#define cpu_to_scr(dw) cpu_to_be32(dw)
392#define scr_to_cpu(dw) be32_to_cpu(dw)
393
394#else
395
396#define cpu_to_scr(dw) (dw)
397#define scr_to_cpu(dw) (dw)
398
399#endif
400
401/*
402 * Access to the controller chip.
403 *
404 * If the CPU and the NCR use same endian-ness addressing,
405 * no byte reordering is needed for accessing chip io
406 * registers. Functions suffixed by '_raw' are assumed
407 * to access the chip over the PCI without doing byte
408 * reordering. Functions suffixed by '_l2b' are
409 * assumed to perform little-endian to big-endian byte
410 * reordering, those suffixed by '_b2l' blah, blah,
411 * blah, ...
412 */
413
414/*
415 * MEMORY mapped IO input / output
416 */
417
418#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
419#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
420
421#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
422
423#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
424#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
425
426#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
427#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
428
429#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
430
431#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
432#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
433
434#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
435#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
436
437#else
438
439#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
440/* Only 8 or 32 bit transfers allowed */
441#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
442#else
443#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
444#endif
445#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
446
447#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
448/* Only 8 or 32 bit transfers allowed */
449#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
450#else
451#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
452#endif
453#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
454
455#endif
456
457#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
458#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
459#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
460
461#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
462#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
463#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
464
465/*
466 * Set bit field ON, OFF
467 */
468
469#define OUTONB(r, m) OUTB(r, INB(r) | (m))
470#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
471#define OUTONW(r, m) OUTW(r, INW(r) | (m))
472#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
473#define OUTONL(r, m) OUTL(r, INL(r) | (m))
474#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
475
476/*
477 * We normally want the chip to have a consistent view
478 * of driver internal data structures when we restart it.
479 * Thus these macros.
480 */
481#define OUTL_DSP(v) \
482 do { \
483 MEMORY_BARRIER(); \
484 OUTL (nc_dsp, (v)); \
485 } while (0)
486
487#define OUTONB_STD() \
488 do { \
489 MEMORY_BARRIER(); \
490 OUTONB (nc_dcntl, (STD|NOCOM)); \
491 } while (0)
492
493
494/*
495** NCR53C8XX devices features table.
496*/
497struct ncr_chip {
498 unsigned short revision_id;
499 unsigned char burst_max; /* log-base-2 of max burst */
500 unsigned char offset_max;
501 unsigned char nr_divisor;
502 unsigned int features;
503#define FE_LED0 (1<<0)
504#define FE_WIDE (1<<1) /* Wide data transfers */
505#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
506#define FE_DBLR (1<<4) /* Clock doubler present */
507#define FE_QUAD (1<<5) /* Clock quadrupler present */
508#define FE_ERL (1<<6) /* Enable read line */
509#define FE_CLSE (1<<7) /* Cache line size enable */
510#define FE_WRIE (1<<8) /* Write & Invalidate enable */
511#define FE_ERMP (1<<9) /* Enable read multiple */
512#define FE_BOF (1<<10) /* Burst opcode fetch */
513#define FE_DFS (1<<11) /* DMA fifo size */
514#define FE_PFEN (1<<12) /* Prefetch enable */
515#define FE_LDSTR (1<<13) /* Load/Store supported */
516#define FE_RAM (1<<14) /* On chip RAM present */
517#define FE_VARCLK (1<<15) /* SCSI clock may vary */
518#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
519#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
520#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
521#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
522#define FE_LEDC (1<<20) /* Hardware control of LED */
523#define FE_DIFF (1<<21) /* Support Differential SCSI */
524#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
525#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
526#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
527#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
528#define FE_EHP (1<<27) /* 720: Even host parity */
529#define FE_MUX (1<<28) /* 720: Multiplexed bus */
530#define FE_EA (1<<29) /* 720: Enable Ack */
531
532#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
533#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
534#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
535};
536
537
538/*
539** Driver setup structure.
540**
541** This structure is initialized from linux config options.
542** It can be overridden at boot-up by the boot command line.
543*/
544#define SCSI_NCR_MAX_EXCLUDES 8
545struct ncr_driver_setup {
546 u8 master_parity;
547 u8 scsi_parity;
548 u8 disconnection;
549 u8 special_features;
550 u8 force_sync_nego;
551 u8 reverse_probe;
552 u8 pci_fix_up;
553 u8 use_nvram;
554 u8 verbose;
555 u8 default_tags;
556 u16 default_sync;
557 u16 debug;
558 u8 burst_max;
559 u8 led_pin;
560 u8 max_wide;
561 u8 settle_delay;
562 u8 diff_support;
563 u8 irqm;
564 u8 bus_check;
565 u8 optimize;
566 u8 recovery;
567 u8 host_id;
568 u16 iarb;
569 u32 excludes[SCSI_NCR_MAX_EXCLUDES];
570 char tag_ctrl[100];
571};
572
573/*
574** Initial setup.
575** Can be overriden at startup by a command line.
576*/
577#define SCSI_NCR_DRIVER_SETUP \
578{ \
579 SCSI_NCR_SETUP_MASTER_PARITY, \
580 SCSI_NCR_SETUP_SCSI_PARITY, \
581 SCSI_NCR_SETUP_DISCONNECTION, \
582 SCSI_NCR_SETUP_SPECIAL_FEATURES, \
583 SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
584 0, \
585 0, \
586 1, \
587 0, \
588 SCSI_NCR_SETUP_DEFAULT_TAGS, \
589 SCSI_NCR_SETUP_DEFAULT_SYNC, \
590 0x00, \
591 7, \
592 0, \
593 1, \
594 SCSI_NCR_SETUP_SETTLE_TIME, \
595 0, \
596 0, \
597 1, \
598 0, \
599 0, \
600 255, \
601 0x00 \
602}
603
604/*
605** Boot fail safe setup.
606** Override initial setup from boot command line:
607** ncr53c8xx=safe:y
608*/
609#define SCSI_NCR_DRIVER_SAFE_SETUP \
610{ \
611 0, \
612 1, \
613 0, \
614 0, \
615 0, \
616 0, \
617 0, \
618 1, \
619 2, \
620 0, \
621 255, \
622 0x00, \
623 255, \
624 0, \
625 0, \
626 10, \
627 1, \
628 1, \
629 1, \
630 0, \
631 0, \
632 255 \
633}
634
635/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
636
637/*-----------------------------------------------------------------
638**
639** The ncr 53c810 register structure.
640**
641**-----------------------------------------------------------------
642*/
643
644struct ncr_reg {
645/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
646
647/*01*/ u8 nc_scntl1; /* no reset */
648 #define ISCON 0x10 /* connected to scsi */
649 #define CRST 0x08 /* force reset */
650 #define IARB 0x02 /* immediate arbitration */
651
652/*02*/ u8 nc_scntl2; /* no disconnect expected */
653 #define SDU 0x80 /* cmd: disconnect will raise error */
654 #define CHM 0x40 /* sta: chained mode */
655 #define WSS 0x08 /* sta: wide scsi send [W]*/
656 #define WSR 0x01 /* sta: wide scsi received [W]*/
657
658/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
659 #define EWS 0x08 /* cmd: enable wide scsi [W]*/
660 #define ULTRA 0x80 /* cmd: ULTRA enable */
661 /* bits 0-2, 7 rsvd for C1010 */
662
663/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
664 #define RRE 0x40 /* r/w:e enable response to resel. */
665 #define SRE 0x20 /* r/w:e enable response to select */
666
667/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
668 /* bits 6-7 rsvd for C1010 */
669
670/*06*/ u8 nc_sdid; /* ### Destination-ID */
671
672/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
673
674/*08*/ u8 nc_sfbr; /* ### First byte in phase */
675
676/*09*/ u8 nc_socl;
677 #define CREQ 0x80 /* r/w: SCSI-REQ */
678 #define CACK 0x40 /* r/w: SCSI-ACK */
679 #define CBSY 0x20 /* r/w: SCSI-BSY */
680 #define CSEL 0x10 /* r/w: SCSI-SEL */
681 #define CATN 0x08 /* r/w: SCSI-ATN */
682 #define CMSG 0x04 /* r/w: SCSI-MSG */
683 #define CC_D 0x02 /* r/w: SCSI-C_D */
684 #define CI_O 0x01 /* r/w: SCSI-I_O */
685
686/*0a*/ u8 nc_ssid;
687
688/*0b*/ u8 nc_sbcl;
689
690/*0c*/ u8 nc_dstat;
691 #define DFE 0x80 /* sta: dma fifo empty */
692 #define MDPE 0x40 /* int: master data parity error */
693 #define BF 0x20 /* int: script: bus fault */
694 #define ABRT 0x10 /* int: script: command aborted */
695 #define SSI 0x08 /* int: script: single step */
696 #define SIR 0x04 /* int: script: interrupt instruct. */
697 #define IID 0x01 /* int: script: illegal instruct. */
698
699/*0d*/ u8 nc_sstat0;
700 #define ILF 0x80 /* sta: data in SIDL register lsb */
701 #define ORF 0x40 /* sta: data in SODR register lsb */
702 #define OLF 0x20 /* sta: data in SODL register lsb */
703 #define AIP 0x10 /* sta: arbitration in progress */
704 #define LOA 0x08 /* sta: arbitration lost */
705 #define WOA 0x04 /* sta: arbitration won */
706 #define IRST 0x02 /* sta: scsi reset signal */
707 #define SDP 0x01 /* sta: scsi parity signal */
708
709/*0e*/ u8 nc_sstat1;
710 #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
711
712/*0f*/ u8 nc_sstat2;
713 #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
714 #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
715 #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
716 #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
717 #define LDSC 0x02 /* sta: disconnect & reconnect */
718
719/*10*/ u8 nc_dsa; /* --> Base page */
720/*11*/ u8 nc_dsa1;
721/*12*/ u8 nc_dsa2;
722/*13*/ u8 nc_dsa3;
723
724/*14*/ u8 nc_istat; /* --> Main Command and status */
725 #define CABRT 0x80 /* cmd: abort current operation */
726 #define SRST 0x40 /* mod: reset chip */
727 #define SIGP 0x20 /* r/w: message from host to ncr */
728 #define SEM 0x10 /* r/w: message between host + ncr */
729 #define CON 0x08 /* sta: connected to scsi */
730 #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
731 #define SIP 0x02 /* sta: scsi-interrupt */
732 #define DIP 0x01 /* sta: host/script interrupt */
733
734/*15*/ u8 nc_istat1; /* 896 and later cores only */
735 #define FLSH 0x04 /* sta: chip is flushing */
736 #define SRUN 0x02 /* sta: scripts are running */
737 #define SIRQD 0x01 /* r/w: disable INT pin */
738
739/*16*/ u8 nc_mbox0; /* 896 and later cores only */
740/*17*/ u8 nc_mbox1; /* 896 and later cores only */
741
742/*18*/ u8 nc_ctest0;
743 #define EHP 0x04 /* 720 even host parity */
744/*19*/ u8 nc_ctest1;
745
746/*1a*/ u8 nc_ctest2;
747 #define CSIGP 0x40
748 /* bits 0-2,7 rsvd for C1010 */
749
750/*1b*/ u8 nc_ctest3;
751 #define FLF 0x08 /* cmd: flush dma fifo */
752 #define CLF 0x04 /* cmd: clear dma fifo */
753 #define FM 0x02 /* mod: fetch pin mode */
754 #define WRIE 0x01 /* mod: write and invalidate enable */
755 /* bits 4-7 rsvd for C1010 */
756
757/*1c*/ u32 nc_temp; /* ### Temporary stack */
758
759/*20*/ u8 nc_dfifo;
760/*21*/ u8 nc_ctest4;
761 #define MUX 0x80 /* 720 host bus multiplex mode */
762 #define BDIS 0x80 /* mod: burst disable */
763 #define MPEE 0x08 /* mod: master parity error enable */
764
765/*22*/ u8 nc_ctest5;
766 #define DFS 0x20 /* mod: dma fifo size */
767 /* bits 0-1, 3-7 rsvd for C1010 */
768/*23*/ u8 nc_ctest6;
769
770/*24*/ u32 nc_dbc; /* ### Byte count and command */
771/*28*/ u32 nc_dnad; /* ### Next command register */
772/*2c*/ u32 nc_dsp; /* --> Script Pointer */
773/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
774
775/*34*/ u8 nc_scratcha; /* Temporary register a */
776/*35*/ u8 nc_scratcha1;
777/*36*/ u8 nc_scratcha2;
778/*37*/ u8 nc_scratcha3;
779
780/*38*/ u8 nc_dmode;
781 #define BL_2 0x80 /* mod: burst length shift value +2 */
782 #define BL_1 0x40 /* mod: burst length shift value +1 */
783 #define ERL 0x08 /* mod: enable read line */
784 #define ERMP 0x04 /* mod: enable read multiple */
785 #define BOF 0x02 /* mod: burst op code fetch */
786
787/*39*/ u8 nc_dien;
788/*3a*/ u8 nc_sbr;
789
790/*3b*/ u8 nc_dcntl; /* --> Script execution control */
791 #define CLSE 0x80 /* mod: cache line size enable */
792 #define PFF 0x40 /* cmd: pre-fetch flush */
793 #define PFEN 0x20 /* mod: pre-fetch enable */
794 #define EA 0x20 /* mod: 720 enable-ack */
795 #define SSM 0x10 /* mod: single step mode */
796 #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
797 #define STD 0x04 /* cmd: start dma mode */
798 #define IRQD 0x02 /* mod: irq disable */
799 #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
800 /* bits 0-1 rsvd for C1010 */
801
802/*3c*/ u32 nc_adder;
803
804/*40*/ u16 nc_sien; /* -->: interrupt enable */
805/*42*/ u16 nc_sist; /* <--: interrupt status */
806 #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
807 #define STO 0x0400/* sta: timeout (select) */
808 #define GEN 0x0200/* sta: timeout (general) */
809 #define HTH 0x0100/* sta: timeout (handshake) */
810 #define MA 0x80 /* sta: phase mismatch */
811 #define CMP 0x40 /* sta: arbitration complete */
812 #define SEL 0x20 /* sta: selected by another device */
813 #define RSL 0x10 /* sta: reselected by another device*/
814 #define SGE 0x08 /* sta: gross error (over/underflow)*/
815 #define UDC 0x04 /* sta: unexpected disconnect */
816 #define RST 0x02 /* sta: scsi bus reset detected */
817 #define PAR 0x01 /* sta: scsi parity error */
818
819/*44*/ u8 nc_slpar;
820/*45*/ u8 nc_swide;
821/*46*/ u8 nc_macntl;
822/*47*/ u8 nc_gpcntl;
823/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
824/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
825/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
826
827/*4c*/ u8 nc_stest0;
828
829/*4d*/ u8 nc_stest1;
830 #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
831 #define DBLEN 0x08 /* clock doubler running */
832 #define DBLSEL 0x04 /* clock doubler selected */
833
834
835/*4e*/ u8 nc_stest2;
836 #define ROF 0x40 /* reset scsi offset (after gross error!) */
837 #define DIF 0x20 /* 720 SCSI differential mode */
838 #define EXT 0x02 /* extended filtering */
839
840/*4f*/ u8 nc_stest3;
841 #define TE 0x80 /* c: tolerAnt enable */
842 #define HSC 0x20 /* c: Halt SCSI Clock */
843 #define CSF 0x02 /* c: clear scsi fifo */
844
845/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
846/*52*/ u8 nc_stest4;
847 #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
848 #define SMODE_HVD 0x40 /* High Voltage Differential */
849 #define SMODE_SE 0x80 /* Single Ended */
850 #define SMODE_LVD 0xc0 /* Low Voltage Differential */
851 #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
852 /* bits 0-5 rsvd for C1010 */
853
854/*53*/ u8 nc_53_;
855/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
856/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
857 #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
858 #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
859 #define ENNDJ 0x20 /* Enable Non Data PM Jump */
860 #define DISFC 0x10 /* Disable Auto FIFO Clear */
861 #define DILS 0x02 /* Disable Internal Load/Store */
862 #define DPR 0x01 /* Disable Pipe Req */
863
864/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
865 #define ZMOD 0x80 /* High Impedance Mode */
866 #define DIC 0x10 /* Disable Internal Cycles */
867 #define DDAC 0x08 /* Disable Dual Address Cycle */
868 #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
869 #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
870 #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
871
872/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
873/*5a*/ u16 nc_5a_;
874
875/*5c*/ u8 nc_scr0; /* Working register B */
876/*5d*/ u8 nc_scr1; /* */
877/*5e*/ u8 nc_scr2; /* */
878/*5f*/ u8 nc_scr3; /* */
879
880/*60*/ u8 nc_scrx[64]; /* Working register C-R */
881/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
882/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
883/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
884/*ac*/ u32 nc_drs; /* DSA Relative Selector */
885/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
886/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
887/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
888/*bc*/ u16 nc_scntl4; /* C1010 only */
889 #define U3EN 0x80 /* Enable Ultra 3 */
890 #define AIPEN 0x40 /* Allow check upper byte lanes */
891 #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
892 transfer edge */
893 #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
894 transfer edge */
895
896/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
897/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
898
899/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
900/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
901/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
902/*c9*/ u8 nc_rbc1; /* */
903/*ca*/ u8 nc_rbc2; /* */
904/*cb*/ u8 nc_rbc3; /* */
905
906/*cc*/ u8 nc_ua; /* Updated Address */
907/*cd*/ u8 nc_ua1; /* */
908/*ce*/ u8 nc_ua2; /* */
909/*cf*/ u8 nc_ua3; /* */
910/*d0*/ u32 nc_esa; /* Entry Storage Address */
911/*d4*/ u8 nc_ia; /* Instruction Address */
912/*d5*/ u8 nc_ia1;
913/*d6*/ u8 nc_ia2;
914/*d7*/ u8 nc_ia3;
915/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
916/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
917
918 /* Following for C1010 only */
919/*e0*/ u16 nc_crcpad; /* CRC Value */
920/*e2*/ u8 nc_crccntl0; /* CRC control register */
921 #define SNDCRC 0x10 /* Send CRC Request */
922/*e3*/ u8 nc_crccntl1; /* CRC control register */
923/*e4*/ u32 nc_crcdata; /* CRC data register */
924/*e8*/ u32 nc_e8_; /* rsvd */
925/*ec*/ u32 nc_ec_; /* rsvd */
926/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
927
928};
929
930/*-----------------------------------------------------------
931**
932** Utility macros for the script.
933**
934**-----------------------------------------------------------
935*/
936
937#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
938#define REG(r) REGJ (nc_, r)
939
940typedef u32 ncrcmd;
941
942/*-----------------------------------------------------------
943**
944** SCSI phases
945**
946** DT phases illegal for ncr driver.
947**
948**-----------------------------------------------------------
949*/
950
951#define SCR_DATA_OUT 0x00000000
952#define SCR_DATA_IN 0x01000000
953#define SCR_COMMAND 0x02000000
954#define SCR_STATUS 0x03000000
955#define SCR_DT_DATA_OUT 0x04000000
956#define SCR_DT_DATA_IN 0x05000000
957#define SCR_MSG_OUT 0x06000000
958#define SCR_MSG_IN 0x07000000
959
960#define SCR_ILG_OUT 0x04000000
961#define SCR_ILG_IN 0x05000000
962
963/*-----------------------------------------------------------
964**
965** Data transfer via SCSI.
966**
967**-----------------------------------------------------------
968**
969** MOVE_ABS (LEN)
970** <<start address>>
971**
972** MOVE_IND (LEN)
973** <<dnad_offset>>
974**
975** MOVE_TBL
976** <<dnad_offset>>
977**
978**-----------------------------------------------------------
979*/
980
981#define OPC_MOVE 0x08000000
982
983#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
984#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
985#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
986
987#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
988#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
989#define SCR_CHMOV_TBL (0x10000000)
990
991struct scr_tblmove {
992 u32 size;
993 u32 addr;
994};
995
996/*-----------------------------------------------------------
997**
998** Selection
999**
1000**-----------------------------------------------------------
1001**
1002** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
1003** <<alternate_address>>
1004**
1005** SEL_TBL | << dnad_offset>> [ | REL_JMP]
1006** <<alternate_address>>
1007**
1008**-----------------------------------------------------------
1009*/
1010
1011#define SCR_SEL_ABS 0x40000000
1012#define SCR_SEL_ABS_ATN 0x41000000
1013#define SCR_SEL_TBL 0x42000000
1014#define SCR_SEL_TBL_ATN 0x43000000
1015
1016
1017#ifdef SCSI_NCR_BIG_ENDIAN
1018struct scr_tblsel {
1019 u8 sel_scntl3;
1020 u8 sel_id;
1021 u8 sel_sxfer;
1022 u8 sel_scntl4;
1023};
1024#else
1025struct scr_tblsel {
1026 u8 sel_scntl4;
1027 u8 sel_sxfer;
1028 u8 sel_id;
1029 u8 sel_scntl3;
1030};
1031#endif
1032
1033#define SCR_JMP_REL 0x04000000
1034#define SCR_ID(id) (((u32)(id)) << 16)
1035
1036/*-----------------------------------------------------------
1037**
1038** Waiting for Disconnect or Reselect
1039**
1040**-----------------------------------------------------------
1041**
1042** WAIT_DISC
1043** dummy: <<alternate_address>>
1044**
1045** WAIT_RESEL
1046** <<alternate_address>>
1047**
1048**-----------------------------------------------------------
1049*/
1050
1051#define SCR_WAIT_DISC 0x48000000
1052#define SCR_WAIT_RESEL 0x50000000
1053
1054/*-----------------------------------------------------------
1055**
1056** Bit Set / Reset
1057**
1058**-----------------------------------------------------------
1059**
1060** SET (flags {|.. })
1061**
1062** CLR (flags {|.. })
1063**
1064**-----------------------------------------------------------
1065*/
1066
1067#define SCR_SET(f) (0x58000000 | (f))
1068#define SCR_CLR(f) (0x60000000 | (f))
1069
1070#define SCR_CARRY 0x00000400
1071#define SCR_TRG 0x00000200
1072#define SCR_ACK 0x00000040
1073#define SCR_ATN 0x00000008
1074
1075
1076
1077
1078/*-----------------------------------------------------------
1079**
1080** Memory to memory move
1081**
1082**-----------------------------------------------------------
1083**
1084** COPY (bytecount)
1085** << source_address >>
1086** << destination_address >>
1087**
1088** SCR_COPY sets the NO FLUSH option by default.
1089** SCR_COPY_F does not set this option.
1090**
1091** For chips which do not support this option,
1092** ncr_copy_and_bind() will remove this bit.
1093**-----------------------------------------------------------
1094*/
1095
1096#define SCR_NO_FLUSH 0x01000000
1097
1098#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
1099#define SCR_COPY_F(n) (0xc0000000 | (n))
1100
1101/*-----------------------------------------------------------
1102**
1103** Register move and binary operations
1104**
1105**-----------------------------------------------------------
1106**
1107** SFBR_REG (reg, op, data) reg = SFBR op data
1108** << 0 >>
1109**
1110** REG_SFBR (reg, op, data) SFBR = reg op data
1111** << 0 >>
1112**
1113** REG_REG (reg, op, data) reg = reg op data
1114** << 0 >>
1115**
1116**-----------------------------------------------------------
1117** On 810A, 860, 825A, 875, 895 and 896 chips the content
1118** of SFBR register can be used as data (SCR_SFBR_DATA).
1119** The 896 has additionnal IO registers starting at
1120** offset 0x80. Bit 7 of register offset is stored in
1121** bit 7 of the SCRIPTS instruction first DWORD.
1122**-----------------------------------------------------------
1123*/
1124
1125#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
1126
1127#define SCR_SFBR_REG(reg,op,data) \
1128 (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1129
1130#define SCR_REG_SFBR(reg,op,data) \
1131 (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1132
1133#define SCR_REG_REG(reg,op,data) \
1134 (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1135
1136
1137#define SCR_LOAD 0x00000000
1138#define SCR_SHL 0x01000000
1139#define SCR_OR 0x02000000
1140#define SCR_XOR 0x03000000
1141#define SCR_AND 0x04000000
1142#define SCR_SHR 0x05000000
1143#define SCR_ADD 0x06000000
1144#define SCR_ADDC 0x07000000
1145
1146#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
1147
1148/*-----------------------------------------------------------
1149**
1150** FROM_REG (reg) SFBR = reg
1151** << 0 >>
1152**
1153** TO_REG (reg) reg = SFBR
1154** << 0 >>
1155**
1156** LOAD_REG (reg, data) reg = <data>
1157** << 0 >>
1158**
1159** LOAD_SFBR(data) SFBR = <data>
1160** << 0 >>
1161**
1162**-----------------------------------------------------------
1163*/
1164
1165#define SCR_FROM_REG(reg) \
1166 SCR_REG_SFBR(reg,SCR_OR,0)
1167
1168#define SCR_TO_REG(reg) \
1169 SCR_SFBR_REG(reg,SCR_OR,0)
1170
1171#define SCR_LOAD_REG(reg,data) \
1172 SCR_REG_REG(reg,SCR_LOAD,data)
1173
1174#define SCR_LOAD_SFBR(data) \
1175 (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
1176
1177/*-----------------------------------------------------------
1178**
1179** LOAD from memory to register.
1180** STORE from register to memory.
1181**
1182** Only supported by 810A, 860, 825A, 875, 895 and 896.
1183**
1184**-----------------------------------------------------------
1185**
1186** LOAD_ABS (LEN)
1187** <<start address>>
1188**
1189** LOAD_REL (LEN) (DSA relative)
1190** <<dsa_offset>>
1191**
1192**-----------------------------------------------------------
1193*/
1194
1195#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
1196#define SCR_NO_FLUSH2 0x02000000
1197#define SCR_DSA_REL2 0x10000000
1198
1199#define SCR_LOAD_R(reg, how, n) \
1200 (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1201
1202#define SCR_STORE_R(reg, how, n) \
1203 (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1204
1205#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
1206#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
1207#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
1208#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
1209
1210#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
1211#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
1212#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
1213#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
1214
1215
1216/*-----------------------------------------------------------
1217**
1218** Waiting for Disconnect or Reselect
1219**
1220**-----------------------------------------------------------
1221**
1222** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
1223** <<address>>
1224**
1225** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
1226** <<distance>>
1227**
1228** CALL [ | IFTRUE/IFFALSE ( ... ) ]
1229** <<address>>
1230**
1231** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
1232** <<distance>>
1233**
1234** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
1235** <<dummy>>
1236**
1237** INT [ | IFTRUE/IFFALSE ( ... ) ]
1238** <<ident>>
1239**
1240** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
1241** <<ident>>
1242**
1243** Conditions:
1244** WHEN (phase)
1245** IF (phase)
1246** CARRYSET
1247** DATA (data, mask)
1248**
1249**-----------------------------------------------------------
1250*/
1251
1252#define SCR_NO_OP 0x80000000
1253#define SCR_JUMP 0x80080000
1254#define SCR_JUMP64 0x80480000
1255#define SCR_JUMPR 0x80880000
1256#define SCR_CALL 0x88080000
1257#define SCR_CALLR 0x88880000
1258#define SCR_RETURN 0x90080000
1259#define SCR_INT 0x98080000
1260#define SCR_INT_FLY 0x98180000
1261
1262#define IFFALSE(arg) (0x00080000 | (arg))
1263#define IFTRUE(arg) (0x00000000 | (arg))
1264
1265#define WHEN(phase) (0x00030000 | (phase))
1266#define IF(phase) (0x00020000 | (phase))
1267
1268#define DATA(D) (0x00040000 | ((D) & 0xff))
1269#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
1270
1271#define CARRYSET (0x00200000)
1272
1273/*-----------------------------------------------------------
1274**
1275** SCSI constants.
1276**
1277**-----------------------------------------------------------
1278*/
1279
1280/*
1281** Messages
1282*/
1283
1284#define M_COMPLETE COMMAND_COMPLETE
1285#define M_EXTENDED EXTENDED_MESSAGE
1286#define M_SAVE_DP SAVE_POINTERS
1287#define M_RESTORE_DP RESTORE_POINTERS
1288#define M_DISCONNECT DISCONNECT
1289#define M_ID_ERROR INITIATOR_ERROR
1290#define M_ABORT ABORT_TASK_SET
1291#define M_REJECT MESSAGE_REJECT
1292#define M_NOOP NOP
1293#define M_PARITY MSG_PARITY_ERROR
1294#define M_LCOMPLETE LINKED_CMD_COMPLETE
1295#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE
1296#define M_RESET TARGET_RESET
1297#define M_ABORT_TAG ABORT_TASK
1298#define M_CLEAR_QUEUE CLEAR_TASK_SET
1299#define M_INIT_REC INITIATE_RECOVERY
1300#define M_REL_REC RELEASE_RECOVERY
1301#define M_TERMINATE (0x11)
1302#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG
1303#define M_HEAD_TAG HEAD_OF_QUEUE_TAG
1304#define M_ORDERED_TAG ORDERED_QUEUE_TAG
1305#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE
1306#define M_IDENTIFY (0x80)
1307
1308#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER
1309#define M_X_SYNC_REQ EXTENDED_SDTR
1310#define M_X_WIDE_REQ EXTENDED_WDTR
1311#define M_X_PPR_REQ EXTENDED_PPR
1312
1313/*
1314** Status
1315*/
1316
1317#define S_GOOD (0x00)
1318#define S_CHECK_COND (0x02)
1319#define S_COND_MET (0x04)
1320#define S_BUSY (0x08)
1321#define S_INT (0x10)
1322#define S_INT_COND_MET (0x14)
1323#define S_CONFLICT (0x18)
1324#define S_TERMINATED (0x20)
1325#define S_QUEUE_FULL (0x28)
1326#define S_ILLEGAL (0xff)
1327#define S_SENSE (0x80)
1328
1329/*
1330 * End of ncrreg from FreeBSD
1331 */
1332
1333#endif /* defined SYM53C8XX_DEFS_H */
Making Linux better for my computers