Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | 2001-10-11 Tim Waugh <twaugh@redhat.com> |
2 | * parport_pc.c, parport_serial.c: Support for NetMos cards. | |
3 | + Patch originally from Michael Reinelt <reinelt@eunet.at>. | |
4 | ||
5 | 2002-04-25 Tim Waugh <twaugh@redhat.com> | |
6 | ||
7 | * parport_serial.c, parport_pc.c: Move some SIIG cards around. | |
8 | Patch from Andrey Panin. | |
9 | ||
10 | 2002-01-20 Tim Waugh <twaugh@redhat.com> | |
11 | ||
12 | * parport_pc.c (parport_pc_compat_write_block_pio, | |
13 | parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio): | |
14 | Use the default implementations if the caller wants to use | |
15 | O_NONBLOCK. | |
16 | ||
17 | 2002-02-25 Tim Waugh <twaugh@redhat.com> | |
18 | ||
19 | * parport_pc.c: Make sure that priv->ctr_writable includes IntEn | |
20 | even if IRQ is given as a parameter. | |
21 | ||
22 | 2002-01-21 Tim Waugh <twaugh@redhat.com> | |
23 | ||
24 | * daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select | |
25 | work for ECP/EPP modes. | |
26 | ||
27 | 2002-01-13 Niels Kristian Bech Jensen <nkbj@image.dk> | |
28 | ||
29 | * parport_pc.c: Change some occurrences of frob_set_mode to | |
30 | ECR_WRITE. This fixes PLIP. | |
31 | ||
32 | 2002-01-04 Tim Waugh <twaugh@redhat.com> | |
33 | ||
34 | * share.c (parport_claim_or_block): Sleep interruptibly to prevent | |
35 | a possible deadlock. | |
36 | ||
37 | 2001-12-07 Damian Gruszka <damian.gruszka@VisionSystems.de> | |
38 | ||
39 | * parport_pc.c (ECR_WRITE): Define. If there are forbidden bits | |
40 | in the ECR register for some chips, this will be a useful place to | |
41 | put that knowledge. | |
42 | (change_mode): Use ECR_WRITE. | |
43 | (parport_pc_restore_state): Likewise. | |
44 | (parport_ECPPS2_supported): Likewise. | |
45 | (parport_ECPEPP_supported): Likewise. | |
46 | (irq_probe_EPP): Likewise. | |
47 | (programmable_irq_support): Likewise. | |
48 | (programmable_dma_support): Likewise. | |
49 | (parport_pc_probe_port): Likewise. | |
50 | ||
51 | (frob_set_mode): New function. Set the mode bits of the ECR. | |
52 | (get_fifo_residue): Use frob_set_mode. | |
53 | (parport_pc_ecpepp_read_data): Likewise. | |
54 | (parport_pc_ecpepp_write_data): Likewise. | |
55 | (parport_pc_ecpepp_read_addr): Likewise. | |
56 | (parport_pc_ecpepp_write_addr): Likewise. | |
57 | (parport_pc_compat_write_block_pio): Likewise. | |
58 | (parport_pc_ecp_write_block_pio): Likewise. | |
59 | (parport_ECR_present): Likewise. | |
60 | (parport_ECP_supported): Likewise. | |
61 | (parport_EPP_supported): Likewise. | |
62 | (parport_ECPEPP_supported): Likewise. | |
63 | (programmable_irq_support): Likewise. | |
64 | (irq_probe_ECP): Likewise. | |
65 | (programmable_dma_support): Likewise. | |
66 | ||
67 | (parport_pc_enable_irq): Only enable interrupts if we know which | |
68 | IRQ line they will come from. | |
69 | (parport_pc_init_state): Set nErrIntrEn at initialisation. | |
70 | (parport_pc_restore_state): Only write writable bits of CTR. | |
71 | (parport_irq_probe): If no IRQ is found, take ackIntEn out of the | |
72 | writable bit set. | |
73 | ||
74 | 2001-12-07 Tim Waugh <twaugh@redhat.com> | |
75 | ||
76 | * parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo. | |
77 | (parport_pc_init_state): Only set ackIntEn if we know which IRQ | |
78 | line the interrupts will come from. | |
79 | ||
80 | 2001-12-07 Tim Waugh <twaugh@redhat.com> | |
81 | ||
82 | * ieee1284_ops.c (parport_ieee1284_epp_write_addr, | |
83 | parport_ieee1284_epp_read_addr): Actually do something useful. | |
84 | ||
85 | 2001-12-07 Tim Waugh <twaugh@redhat.com> | |
86 | ||
87 | * parport_pc.c (dmaval): Don't use DMA by default. It seems to be | |
88 | too buggy at the moment. Use 'dma=auto' to restore the previous | |
89 | behaviour. | |
90 | ||
91 | 2001-12-07 Tim Waugh <twaugh@redhat.com> | |
92 | ||
93 | * daisy.c (DEBUG): Undefine. | |
94 | ||
95 | 2001-12-06 Tim Waugh <twaugh@redhat.com> | |
96 | ||
97 | * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off | |
98 | PARPORT_CONTROL_AUTOFD as well. Bug spotted by Joe | |
99 | <joeja@mindspring.com>. | |
100 | ||
101 | 2001-12-03 Rich Liu <Rich.Liu@ite.com.tw> | |
102 | ||
103 | * parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port | |
104 | serial board, not a serial+parallel. | |
105 | ||
106 | 2001-11-30 Niels Kristian Bech Jensen <nkbj@image.dk> | |
107 | ||
108 | * parport_pc.c: Fix compiler warning. | |
109 | ||
110 | 2001-11-14 Tim Waugh <twaugh@redhat.com> | |
111 | ||
112 | * parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before | |
113 | and after probing for ports. | |
114 | * parport_serial.c (parport_register): Likewise. | |
115 | ||
116 | 2001-11-12 Tim Waugh <twaugh@redhat.com> | |
117 | ||
118 | * parport_pc.c (init_module): Warn when parameters are ignored. | |
119 | ||
120 | 2001-11-01 Damian Gruszka <damian.gruszka@VisionSystems.de> | |
121 | ||
122 | * parport_serial.c (serial_register): Set base_baud before | |
123 | calling register_serial. | |
124 | ||
125 | 2001-10-26 Tim Waugh <twaugh@redhat.com> | |
126 | ||
127 | * parport_pc.c (parport_irq_probe): When ECR programmable IRQ | |
128 | support fails, generate interrupts using the FIFO even if we don't | |
129 | want to use the FIFO for real data transfers. | |
130 | (parport_pc_probe_port): Display the ECR address if we have an | |
131 | ECR, not just if we will use the FIFO. | |
132 | ||
133 | 2001-10-24 Dave Strauss <D.Strauss@motorola.com> | |
134 | ||
135 | * parport_pc.c (parport_pc_compat_write_block_pio, | |
136 | parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP | |
137 | transfer to finish up. | |
138 | ||
139 | 2001-10-11 Tim Waugh <twaugh@redhat.com> | |
140 | ||
141 | * parport_pc (sio_ite_8872_probe): New function, submitted by Rich | |
142 | Liu from ITE. Cleaned up, removed bogus phys_to_virt calls. | |
143 | ||
144 | 2001-10-24 Tim Waugh <twaugh@redhat.com> | |
145 | ||
146 | * parport_pc.c: Support for AKS AladdinCARD. Patch from | |
147 | Aladdin Knowledge Systems (Christian Groessler). | |
148 | ||
149 | 2001-10-24 Tim Waugh <twaugh@redhat.com> | |
150 | ||
151 | * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise | |
152 | turnaround time. | |
153 | ||
154 | * ieee1284.c (parport_poll_peripheral): Try a couple of times | |
155 | first without delaying. | |
156 | ||
157 | 2001-10-10 Tim Waugh <twaugh@redhat.com> | |
158 | ||
159 | * parport_pc.c: Support for OX16PCI954 PCI card. | |
160 | ||
161 | 2001-10-10 Tim Waugh <twaugh@redhat.com> | |
162 | ||
163 | * parport_pc.c: Support for OX12PCI840 PCI card (reported by | |
164 | mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we | |
165 | just don't trust its ECR). | |
166 | ||
167 | 2001-10-10 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
168 | ||
169 | * parport_pc.c: Support for AVLAB cards. | |
170 | ||
171 | 2001-10-10 Tim Waugh <twaugh@redhat.com> | |
172 | ||
173 | * ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward): | |
174 | Remember to retry direction switch if it fails. Patch from David | |
175 | Lambert. | |
176 | ||
177 | 2001-10-08 David C. Hansen <haveblue@us.ibm.com> | |
178 | ||
179 | * share.c: Make driverlist_lock and parportlist_lock static. | |
180 | ||
181 | 2001-10-08 Philip Blundell <philb@gnu.org> | |
182 | ||
183 | * parport_pc.c: New modular parameter verbose_logging. | |
184 | Make port->modes indicate the modes that we are prepared to use, | |
185 | rather than the modes that are available. | |
186 | ||
187 | 2001-10-07 Tim Waugh <twaugh@redhat.com> | |
188 | ||
189 | * parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by | |
190 | Kipp Cannon. | |
191 | ||
192 | 2001-10-07 Tim Waugh <twaugh@redhat.com> | |
193 | ||
194 | * parport_serial.c: Remove NetMos support, since it causes problems | |
195 | for some people. | |
196 | ||
197 | 2001-08-30 Tim Waugh <twaugh@redhat.com> | |
198 | ||
199 | * parport_serial.c (parport_serial_pci_probe): Clean-up on partial | |
200 | registration failure. | |
201 | ||
202 | 2001-08-14 Tim Waugh <twaugh@redhat.com> | |
203 | ||
204 | * parport_pc.c (parport_pc_init_superio): Allow for more than one | |
205 | SuperIO device. Patch from Rich Lio (ITE). | |
206 | ||
207 | 2001-08-11 Tim Waugh <twaugh@redhat.com> | |
208 | ||
209 | * parport_pc.c: Support for Titan Electronics cards. | |
210 | ||
211 | 2001-08-08 Tim Waugh <twaugh@redhat.com> | |
212 | ||
213 | * share.c (parport_unregister_device): Remove device from wait list | |
214 | too. | |
215 | ||
216 | 2001-06-20 Tim Waugh <twaugh@redhat.com> | |
217 | ||
218 | * parport_pc.c: Make 'io_hi=0' work. | |
219 | ||
220 | 2001-05-31 Tim Waugh <twaugh@redhat.com> | |
221 | ||
222 | * parport_serial.c: New file. | |
223 | ||
224 | 2001-06-05 Tim Waugh <twaugh@redhat.com> | |
225 | ||
226 | * parport_pc.c (parport_pc_unregister_port): New exported function. | |
227 | Do the opposite of parport_pc_probe_port. | |
228 | (cleanup_module): Use it. | |
229 | ||
230 | 2001-05-22 Juan Quintela <quintela@mandrakesoft.com> | |
231 | ||
232 | * parport_amiga.c: Set printk levels. | |
233 | * parport_gsc.c: Likewise. | |
234 | * parport_mfc3.c: Likewise. | |
235 | * parport_pc.c: Likewise. | |
236 | * parport_sunbpp.c: Likewise. | |
237 | * probe.c: Likewise. | |
238 | * share.c: Likewise. | |
239 | ||
240 | 2001-05-10 Fred Barnes <frmb2@ukc.ac.uk> | |
241 | ||
242 | * parport_pc.c (parport_pc_epp_read_data): added support for | |
243 | reading from a w91284pic peripheral, flag is PARPORT_W91284PIC. | |
244 | ||
245 | 2001-05-07 Fred Barnes <frmb2@ukc.ac.uk> | |
246 | ||
247 | * parport_pc.c (parport_pc_epp_read_data, | |
248 | parport_pc_epp_write_data, parport_pc_epp_read_addr, | |
249 | parport_pc_epp_write_addr): support for fast reads/writes using | |
250 | the PARPORT_EPP_FAST flag. | |
251 | ||
252 | * ieee1284.c (parport_read, parport_write): added code to handle | |
253 | software EPP mode (IEEE1284_MODE_EPPSWE). Added code to allow | |
254 | BYTE mode reverse transfers (previously always went for NIBBLE | |
255 | mode). | |
256 | ||
257 | * ieee1284_ops.c (parport_ieee1284_epp_read_data, | |
258 | parport_ieee1284_epp_write_data): fixed various polarity problems. | |
259 | Also (theoretically) fixed address versions (.._addr), but no | |
260 | hardware to test this on. | |
261 | ||
262 | * parport_pc.h: added parport_dump_state() function for debugging. | |
263 | Needs to have DEBUG_PARPORT to be defined for it to be included. | |
264 | ||
265 | 2001-05-03 Tim Waugh <twaugh@redhat.com> | |
266 | ||
267 | * parport_pc.c: Fix the compile problem I introduce from the last | |
268 | change. | |
269 | ||
270 | 2001-04-20 Paul Gortmaker <p_gortmaker@yahoo.com> | |
271 | ||
272 | * parport_pc.c: Cut down the size quite a bit (more than 4k off | |
273 | the object, about 1k off the zImage) for the older non-PCI | |
274 | machines which are typically resource starved anyway... | |
275 | ||
276 | 2001-03-26 R Horn <rjh@world.std.com> | |
277 | ||
278 | * parport_pc.c: Some commentary changes. | |
279 | ||
280 | 2001-04-19 Tim Waugh <twaugh@redhat.com> | |
281 | ||
282 | * parport_pc.c (parport_pc_probe_port): Remove __devinit | |
283 | attribute. Export unconditionally. | |
284 | ||
285 | 2001-04-14 Jeff Garzik <jgarzik@pobox.com> | |
286 | ||
287 | Merged: 2001-03-30 Tim Waugh <twaugh@redhat.com> | |
288 | ||
289 | * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave | |
290 | like everything else with respect to irq= and dma= parameters. | |
291 | ||
292 | 2001-04-08 Tim Waugh <twaugh@redhat.com> | |
293 | ||
294 | * parport_pc.c (parport_pc_save_state): Read from the soft copy of | |
295 | the control port. | |
296 | (parport_pc_restore_state): Update the soft copy of the control | |
297 | port. | |
298 | ||
299 | 2001-03-26 Tim Waugh <twaugh@redhat.com> | |
300 | ||
301 | * share.c (parport_find_number, parport_find_base): Trigger | |
302 | a lowlevel driver load if there are no ports yet. | |
303 | ||
304 | 2001-03-26 Tim Waugh <twaugh@redhat.com> | |
305 | ||
306 | * parport_pc.c (parport_ECP_supported): Remove the IRQ conflict | |
307 | check since it seems totally unreliable. | |
308 | ||
309 | 2001-03-02 Tim Waugh <twaugh@redhat.com> | |
310 | ||
311 | * ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd | |
312 | on timeout. Matches 2.2.x behaviour. | |
313 | ||
e1f8e874 | 314 | 2001-03-02 Andrew Morton |
1da177e4 LT |
315 | |
316 | * parport_pc.c (registered_parport): New static variable. | |
317 | (parport_pc_find_ports): Set it when we register PCI driver. | |
318 | (init_module): Unregister PCI driver if necessary when we | |
319 | fail. | |
320 | ||
321 | 2001-03-02 Tim Waugh <twaugh@redhat.com> | |
322 | ||
323 | * ieee1284_ops.c (parport_ieee1284_write_compat): Don't use | |
324 | down_trylock to reset the IRQ count. Don't even use sema_init, | |
325 | because it's not even necessary to reset the count. I can't | |
326 | remember why we ever did. | |
327 | ||
328 | 2001-01-04 Peter Osterlund <peter.osterlund@mailbox.swipnet.se> | |
329 | ||
330 | * ieee1284.c (parport_negotiate): Fix missing printk argument. | |
331 | ||
332 | 2001-01-03 Paul Schleger <Paul.Schleger@t-online.de> | |
333 | ||
334 | * probe.c (parse_data): Get rid of trailing blanks in values. | |
335 | Needed for XEROX XJ8C printer. | |
336 | ||
337 | 2001-01-03 Tim Waugh <twaugh@redhat.com> | |
338 | ||
339 | * parport_pc.c (parport_pc_probe_port): Say something when probes | |
340 | are omitted. | |
341 | ||
342 | 2001-01-03 Tim Waugh <twaugh@redhat.com> | |
343 | ||
344 | * parport_pc.c (sio_via_686a_probe): Correct dma=255 fix. | |
345 | ||
346 | 2000-11-21 Tim Waugh <twaugh@redhat.com> | |
347 | ||
348 | * parport_pc.c (parport_pc_ecp_write_block_pio): Fix | |
349 | reverse-to-forward logic. Spotted by Roland Kuck | |
350 | <rci@cityweb.de>. | |
351 | ||
352 | 2000-09-16 Cesar Eduardo Barros <cesarb@nitnet.com.br> | |
353 | ||
354 | * parport_pc.c (sio_via_686a_probe): Handle case | |
355 | where hardware returns 255 for IRQ or DMA. | |
356 | ||
357 | 2000-07-20 Eddie C. Dost <ecd@skynet.be> | |
358 | ||
359 | * share.c (attach_driver_chain): attach[i](port) needs to be | |
360 | replaced by attach[count](port). | |
361 | ||
362 | 2000-07-20 Eddie C. Dost <ecd@skynet.be> | |
363 | ||
364 | * daisy.c (add_dev): kmalloc args are in wrong order. | |
365 | ||
366 | 2000-07-12 Tim Waugh <twaugh@redhat.com> | |
367 | ||
368 | * share.c: Documentation for parport_{get,port}_port, | |
369 | parport_find_{number,base}. | |
370 | ||
371 | 2000-07-12 Tim Waugh <twaugh@redhat.com> | |
372 | ||
373 | * share.c (parport_unregister_device): Remove unneeded locking | |
374 | (test cad==dev). | |
375 | (parport_claim): Likewise. | |
376 | (parport_find_number): New function. | |
377 | ||
378 | 2000-07-12 Tim Waugh <twaugh@redhat.com> | |
379 | ||
380 | * share.c (parport_register_port): Hold the parportlist_lock while | |
381 | looking for a free parport number. | |
382 | (parport_register_driver): Make sure that attach can block. | |
383 | (attach_driver_chain): Likewise. | |
384 | ||
385 | 2000-07-12 Tim Waugh <twaugh@redhat.com> | |
386 | ||
387 | * share.c (call_driver_chain): Do reference counting things. | |
388 | (parport_get_port): New function. | |
389 | (parport_put_port): New function. | |
390 | (parport_register_port): Initialise reference count to zero. | |
391 | (parport_unregister_port): Check reference count rather than | |
392 | driver list to see if we can free the port. | |
393 | ||
394 | 2000-07-12 Tim Waugh <twaugh@redhat.com> | |
395 | ||
396 | * share.c: Clarifications in doc comments. | |
397 | ||
398 | 2000-07-12 Tim Waugh <twaugh@redhat.com> | |
399 | ||
400 | * share.c (parport_unregister_port): Fix typo in comment. | |
401 | ||
402 | 2000-07-11 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
403 | ||
404 | * parport_pc.c: Support for the full range of Timedia cards. | |
405 | ||
406 | 2000-07-08 Tim Waugh <twaugh@redhat.com> | |
407 | ||
408 | * daisy.c: License block comments as part of parportbook. | |
409 | * ieee1284.c: Likewise. | |
410 | * share.c: Likewise. | |
411 | ||
412 | 2000-06-30 Petr Vandrovec <vandrove@vc.cvut.cz> | |
413 | ||
414 | * procfs.c (do_hardware_modes): Generated string can be up to 34 | |
415 | chars long. | |
416 | ||
417 | 2000-06-20 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
418 | ||
419 | * parport_pc.c (parport_pc_compat_write_block_pio): Warn about | |
420 | change_mode failures. | |
421 | (parport_pc_ecp_write_block_pio): Likewise. | |
422 | (parport_pc_ecp_read_block_pio): Likewise. | |
423 | ||
424 | 2000-06-20 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
425 | ||
426 | * parport_pc.c (parport_SPP_supported): Warn more about possibly | |
427 | incorrect parameters. | |
428 | ||
429 | 2000-06-15 Tim Waugh <twaugh@redhat.com> | |
430 | ||
431 | * parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT | |
432 | for ECP ports, since they can all do hardware accelerated | |
433 | compatibility mode (I assume). | |
434 | ||
435 | 2000-06-13 Tim Waugh <twaugh@redhat.com> | |
436 | ||
437 | * parport_pc.c (cleanup_module): Remark about possible bugs. | |
438 | ||
439 | 2000-06-13 Tim Waugh <twaugh@redhat.com> | |
440 | ||
441 | * procfs.c: Break 'hardware' out into separate files. | |
442 | ||
443 | 2000-05-28 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
444 | ||
445 | * Fix PCI ID printk for non-superio PCI cards. | |
446 | ||
447 | 2000-05-28 Tim Waugh <twaugh@redhat.com> | |
448 | ||
449 | * share.c (call_driver_chain): Get the driverlist_lock. | |
450 | (parport_register_device): Make sure that port->devices always | |
451 | looks consistent. | |
452 | (parport_register_driver): Ensure that parport drivers are given | |
453 | parameters that are valid for the duration of the callback by | |
454 | locking the portlist against changes. | |
455 | (parport_unregister_driver): Likewise. | |
456 | (parport_claim): Don't overwrite flags. | |
457 | ||
458 | 2000-05-28 Tim Waugh <twaugh@redhat.com> | |
459 | ||
460 | * daisy.c (assign_addrs): Avoid double-probing daisy-chain devices | |
461 | if the first probe succeeds. | |
462 | ||
463 | 2000-05-16 Tim Waugh <twaugh@redhat.com> | |
464 | ||
465 | * share.c (parport_claim): Fix SMP race. | |
466 | ||
467 | 2000-05-15 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
468 | ||
469 | * parport_pc.c (parport_pc_compat_write_block_pio): Check for | |
470 | timeouts. | |
471 | (parport_pc_ecp_write_block_pio): Likewise. | |
472 | (parport_pc_ecp_read_block_pio): Likewise. | |
473 | ||
474 | 2000-05-02 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
475 | ||
476 | * parport_pc.c: PCI SYBA patch and verbose PCI detection. | |
477 | ||
478 | 2000-05-02 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> | |
479 | ||
480 | * parport_pc.c (decode_smsc): Fix SMSC 665/666 identification. | |
481 | ||
482 | 2000-04-28 Tim Waugh <twaugh@redhat.com> | |
483 | ||
484 | * ieee1284.c: Short function descriptions can't be multiline. | |
485 | ||
486 | * daisy.c: Short function descriptions can't be multiline. | |
487 | ||
488 | 2000-04-19 Tim Waugh <twaugh@redhat.com> | |
489 | ||
490 | * parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen | |
491 | calculation a bit clearer. | |
492 | ||
493 | * ieee1284.c (parport_negotiate): Turn on data line drivers. | |
494 | ||
495 | * ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line | |
496 | drivers. | |
497 | (parport_ieee1284_write_compat): Turn on data line drivers. | |
498 | ||
499 | * daisy.c (assign_addrs): Turn on data line drivers. | |
500 | (cpp_mux): Likewise. | |
501 | (cpp_daisy): Likewise. | |
502 | ||
503 | 2000-04-04 Tim Waugh <twaugh@redhat.com> | |
504 | ||
505 | * parport_pc.c: Add support for another PCI card. | |
506 | ||
507 | 2000-04-04 Tim Waugh <twaugh@redhat.com> | |
508 | ||
509 | * daisy.c: Documentation in kernel-doc format. | |
510 | ||
511 | * ieee1284.c: Likewise. | |
512 | ||
513 | * share.c: Likewise. | |
514 | ||
515 | 2000-04-01 Tim Waugh <twaugh@redhat.com> | |
516 | ||
517 | * share.c (parport_register_device): Need to hold the module | |
518 | reference counts before sleeping. | |
519 | ||
520 | 2000-03-27 Tim Waugh <twaugh@redhat.com> | |
521 | ||
522 | * parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation | |
523 | when peripheral is trying to send data when we stop listening. | |
524 | ||
525 | 2000-03-22 Tim Waugh <twaugh@redhat.com> | |
526 | ||
527 | * init.c (parport_setup): Fix return value. | |
528 | ||
529 | 2000-03-21 Tim Waugh <twaugh@redhat.com> | |
530 | ||
531 | * parport_pc.c (parport_pc_pci_probe): Fix return value; call | |
532 | pci_enable_device. | |
533 | ||
534 | 2000-03-16 Tim Waugh <twaugh@redhat.com> | |
535 | ||
536 | * parport_pc.c (parport_ECP_supported): This seems to trigger on | |
537 | machines that don't have an IRQ conflict; toned down the warning | |
538 | message accordingly. | |
539 | ||
540 | 2000-03-16 Gunther Mayer <gunther.mayer@braunschweig.netsurf.de> | |
541 | ||
542 | * parport_pc.c (show_parconfig_smsc37c669): Fix typo. | |
543 | (decode_winbond): More IDs. | |
544 | (winbond_check): Protect against false positives. | |
545 | (winbond_check2): Likewise. | |
546 | (smsc_check): Likewise. | |
547 | ||
548 | 2000-03-15 Tim Waugh <twaugh@redhat.com> | |
549 | ||
550 | * parport_pc.c (cleanup_module): Don't call pci_unregister_driver | |
551 | if we didn't call pci_register_driver first. | |
552 | ||
553 | 2000-03-13 Tim Waugh <twaugh@redhat.com> | |
554 | ||
555 | * parport_pc.c (parport_pc_init): Moved from asm/parport.h. | |
556 | ||
557 | * Config.in: CONFIG_PARPORT_PC_SUPERIO: new option. | |
558 | ||
559 | * parport_pc.c (show_parconfig_smsc37c669): Make __devinit. | |
560 | (show_parconfig_winbond): Likewise. | |
561 | (decode_winbond): Likewise. | |
562 | (decode_smsc): Likewise. | |
563 | (winbond_check): Likewise. | |
564 | (winbond_check2): Likewise. | |
565 | (smsc_check): Likewise. | |
566 | (detect_and_report_winbond): Likewise. | |
567 | (detect_and_report_smsc): Likewise. | |
568 | (get_superio_dma): Likewise. | |
569 | (get_superio_irq): Likewise. | |
570 | (parport_pc_find_isa_ports): New function. | |
571 | (parport_pc_find_ports): New function. | |
572 | (init_module): Make superio a config option, not a parameter. | |
573 | ||
574 | 2000-03-10 Tim Waugh <twaugh@redhat.com> | |
575 | ||
576 | * parport_pc.c (decode_winbond): Use correct 83877ATF chip ID. | |
577 | (decode_winbond): Fix typo. | |
578 | ||
579 | 2000-03-09 Tim Waugh <twaugh@redhat.com> | |
580 | ||
581 | * parport_pc.c: Integrate SuperIO PCI probe with normal PCI card | |
582 | probe, so that the MODULE_DEVICE_TABLE is complete. | |
583 |