4 * Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
5 * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
6 * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
7 * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
9 * May be copied or modified under the terms of the GNU General Public
10 * License. See linux/COPYING for more information.
12 * See Documentation/cdrom/ide-cd for usage information.
14 * Suggestions are welcome. Patches that work are more welcome though. ;-)
15 * For those wishing to work on this driver, please be sure you download
16 * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
17 * (SFF-8020i rev 2.6) standards. These documents can be obtained by
19 * ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
20 * ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
22 * For historical changelog please see:
23 * Documentation/ide/ChangeLog.ide-cd.1994-2004
26 #define DRV_NAME "ide-cd"
27 #define PFX DRV_NAME ": "
29 #define IDECD_VERSION "5.00"
31 #include <linux/module.h>
32 #include <linux/types.h>
33 #include <linux/kernel.h>
34 #include <linux/delay.h>
35 #include <linux/timer.h>
36 #include <linux/slab.h>
37 #include <linux/interrupt.h>
38 #include <linux/errno.h>
39 #include <linux/cdrom.h>
40 #include <linux/ide.h>
41 #include <linux/completion.h>
42 #include <linux/mutex.h>
43 #include <linux/bcd.h>
45 /* For SCSI -> ATAPI command conversion */
46 #include <scsi/scsi.h>
48 #include <linux/irq.h>
50 #include <asm/byteorder.h>
51 #include <linux/uaccess.h>
52 #include <asm/unaligned.h>
56 static DEFINE_MUTEX(idecd_ref_mutex);
58 static void ide_cd_release(struct kref *);
60 static struct cdrom_info *ide_cd_get(struct gendisk *disk)
62 struct cdrom_info *cd = NULL;
64 mutex_lock(&idecd_ref_mutex);
65 cd = ide_drv_g(disk, cdrom_info);
67 if (ide_device_get(cd->drive))
73 mutex_unlock(&idecd_ref_mutex);
77 static void ide_cd_put(struct cdrom_info *cd)
79 ide_drive_t *drive = cd->drive;
81 mutex_lock(&idecd_ref_mutex);
82 kref_put(&cd->kref, ide_cd_release);
83 ide_device_put(drive);
84 mutex_unlock(&idecd_ref_mutex);
88 * Generic packet command support and error handling routines.
91 /* Mark that we've seen a media change and invalidate our internal buffers. */
92 static void cdrom_saw_media_change(ide_drive_t *drive)
94 drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
95 drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
98 static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
99 struct request_sense *sense)
103 ide_debug_log(IDE_DBG_SENSE, "Call %s, sense_key: 0x%x\n", __func__,
106 if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
109 switch (sense->sense_key) {
111 case RECOVERED_ERROR:
115 * don't care about tray state messages for e.g. capacity
116 * commands or in-progress or becoming ready
118 if (sense->asc == 0x3a || sense->asc == 0x04)
122 case ILLEGAL_REQUEST:
124 * don't log START_STOP unit with LoEj set, since we cannot
125 * reliably check if drive can auto-close
127 if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
133 * Make good and sure we've seen this potential media change.
134 * Some drives (i.e. Creative) fail to present the correct sense
135 * key in the error register.
137 cdrom_saw_media_change(drive);
146 static void cdrom_analyze_sense_data(ide_drive_t *drive,
147 struct request *failed_command,
148 struct request_sense *sense)
150 unsigned long sector;
151 unsigned long bio_sectors;
152 struct cdrom_info *info = drive->driver_data;
154 ide_debug_log(IDE_DBG_SENSE, "Call %s, error_code: 0x%x, "
155 "sense_key: 0x%x\n", __func__, sense->error_code,
159 ide_debug_log(IDE_DBG_SENSE, "%s: failed cmd: 0x%x\n",
160 __func__, failed_command->cmd[0]);
162 if (!cdrom_log_sense(drive, failed_command, sense))
166 * If a read toc is executed for a CD-R or CD-RW medium where the first
167 * toc has not been recorded yet, it will fail with 05/24/00 (which is a
170 if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP)
171 if (sense->sense_key == 0x05 && sense->asc == 0x24)
175 if (sense->error_code == 0x70) {
176 switch (sense->sense_key) {
178 case VOLUME_OVERFLOW:
179 case ILLEGAL_REQUEST:
182 if (failed_command == NULL ||
183 !blk_fs_request(failed_command))
185 sector = (sense->information[0] << 24) |
186 (sense->information[1] << 16) |
187 (sense->information[2] << 8) |
188 (sense->information[3]);
190 if (drive->queue->hardsect_size == 2048)
191 /* device sector size is 2K */
194 bio_sectors = max(bio_sectors(failed_command->bio), 4U);
195 sector &= ~(bio_sectors - 1);
197 if (sector < get_capacity(info->disk) &&
198 drive->probed_capacity - sector < 4 * 75)
199 set_capacity(info->disk, sector);
203 ide_cd_log_error(drive->name, failed_command, sense);
206 static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
207 struct request *failed_command)
209 struct cdrom_info *info = drive->driver_data;
210 struct request *rq = &info->request_sense_request;
212 ide_debug_log(IDE_DBG_SENSE, "Call %s\n", __func__);
215 sense = &info->sense_data;
217 /* stuff the sense request in front of our current request */
218 blk_rq_init(NULL, rq);
219 rq->cmd_type = REQ_TYPE_ATA_PC;
220 rq->rq_disk = info->disk;
223 rq->cmd[0] = GPCMD_REQUEST_SENSE;
227 rq->cmd_type = REQ_TYPE_SENSE;
228 rq->cmd_flags |= REQ_PREEMPT;
230 /* NOTE! Save the failed command in "rq->buffer" */
231 rq->buffer = (void *) failed_command;
234 ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x\n",
235 failed_command->cmd[0]);
237 ide_do_drive_cmd(drive, rq);
240 static void cdrom_end_request(ide_drive_t *drive, int uptodate)
242 struct request *rq = drive->hwif->rq;
243 int nsectors = rq->hard_cur_sectors;
245 ide_debug_log(IDE_DBG_FUNC, "Call %s, cmd: 0x%x, uptodate: 0x%x, "
246 "nsectors: %d\n", __func__, rq->cmd[0], uptodate,
249 if (blk_sense_request(rq) && uptodate) {
251 * For REQ_TYPE_SENSE, "rq->buffer" points to the original
254 struct request *failed = (struct request *) rq->buffer;
255 struct cdrom_info *info = drive->driver_data;
256 void *sense = &info->sense_data;
260 sense = failed->sense;
261 failed->sense_len = rq->sense_len;
263 cdrom_analyze_sense_data(drive, failed, sense);
265 * now end the failed request
267 if (blk_fs_request(failed)) {
268 if (ide_end_dequeued_request(drive, failed, 0,
269 failed->hard_nr_sectors))
272 if (blk_end_request(failed, -EIO,
277 cdrom_analyze_sense_data(drive, NULL, sense);
280 if (!rq->current_nr_sectors && blk_fs_request(rq))
282 /* make sure it's fully ended */
283 if (blk_pc_request(rq))
284 nsectors = (rq->data_len + 511) >> 9;
288 ide_debug_log(IDE_DBG_FUNC, "Exit %s, uptodate: 0x%x, nsectors: %d\n",
289 __func__, uptodate, nsectors);
291 ide_end_request(drive, uptodate, nsectors);
294 static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st)
298 ide_dump_status(drive, msg, st);
303 * 0: if the request should be continued.
304 * 1: if the request was ended.
306 static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
308 ide_hwif_t *hwif = drive->hwif;
309 struct request *rq = hwif->rq;
310 int stat, err, sense_key;
312 /* check for errors */
313 stat = hwif->tp_ops->read_status(hwif);
318 if (OK_STAT(stat, good_stat, BAD_R_STAT))
321 /* get the IDE error register */
322 err = ide_read_error(drive);
323 sense_key = err >> 4;
326 printk(KERN_ERR PFX "%s: missing rq in %s\n",
327 drive->name, __func__);
331 ide_debug_log(IDE_DBG_RQ, "%s: stat: 0x%x, good_stat: 0x%x, "
332 "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x\n",
333 __func__, stat, good_stat, rq->cmd[0], rq->cmd_type, err);
335 if (blk_sense_request(rq)) {
337 * We got an error trying to get sense info from the drive
338 * (probably while trying to recover from a former error).
341 rq->cmd_flags |= REQ_FAILED;
342 cdrom_end_request(drive, 0);
343 ide_error(drive, "request sense failure", stat);
346 } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
347 /* All other functions, except for READ. */
350 * if we have an error, pass back CHECK_CONDITION as the
353 if (blk_pc_request(rq) && !rq->errors)
354 rq->errors = SAM_STAT_CHECK_CONDITION;
356 /* check for tray open */
357 if (sense_key == NOT_READY) {
358 cdrom_saw_media_change(drive);
359 } else if (sense_key == UNIT_ATTENTION) {
360 /* check for media change */
361 cdrom_saw_media_change(drive);
363 } else if (sense_key == ILLEGAL_REQUEST &&
364 rq->cmd[0] == GPCMD_START_STOP_UNIT) {
366 * Don't print error message for this condition--
367 * SFF8090i indicates that 5/24/00 is the correct
368 * response to a request to close the tray if the
369 * drive doesn't have that capability.
370 * cdrom_log_sense() knows this!
372 } else if (!(rq->cmd_flags & REQ_QUIET)) {
373 /* otherwise, print an error */
374 ide_dump_status(drive, "packet command error", stat);
377 rq->cmd_flags |= REQ_FAILED;
380 * instead of playing games with moving completions around,
381 * remove failed request completely and end it when the
382 * request sense has completed
386 } else if (blk_fs_request(rq)) {
387 int do_end_request = 0;
389 /* handle errors from READ and WRITE requests */
391 if (blk_noretry_request(rq))
394 if (sense_key == NOT_READY) {
396 if (rq_data_dir(rq) == READ) {
397 cdrom_saw_media_change(drive);
399 /* fail the request */
400 printk(KERN_ERR PFX "%s: tray open\n",
404 struct cdrom_info *info = drive->driver_data;
407 * Allow the drive 5 seconds to recover, some
408 * devices will return this error while flushing
412 info->write_timeout = jiffies +
413 ATAPI_WAIT_WRITE_BUSY;
415 if (time_after(jiffies, info->write_timeout))
418 struct request_queue *q = drive->queue;
422 * take a breather relying on the unplug
423 * timer to kick us again
425 spin_lock_irqsave(q->queue_lock, flags);
427 spin_unlock_irqrestore(q->queue_lock, flags);
432 } else if (sense_key == UNIT_ATTENTION) {
434 cdrom_saw_media_change(drive);
437 * Arrange to retry the request but be sure to give up
438 * if we've retried too many times.
440 if (++rq->errors > ERROR_MAX)
442 } else if (sense_key == ILLEGAL_REQUEST ||
443 sense_key == DATA_PROTECT) {
445 * No point in retrying after an illegal request or data
448 ide_dump_status_no_sense(drive, "command error", stat);
450 } else if (sense_key == MEDIUM_ERROR) {
452 * No point in re-trying a zillion times on a bad
453 * sector. If we got here the error is not correctable.
455 ide_dump_status_no_sense(drive,
456 "media error (bad sector)",
459 } else if (sense_key == BLANK_CHECK) {
460 /* disk appears blank ?? */
461 ide_dump_status_no_sense(drive, "media error (blank)",
464 } else if ((err & ~ATA_ABORTED) != 0) {
465 /* go to the default handler for other errors */
466 ide_error(drive, "cdrom_decode_status", stat);
468 } else if ((++rq->errors > ERROR_MAX)) {
469 /* we've racked up too many retries, abort */
474 * End a request through request sense analysis when we have
475 * sense data. We need this in order to perform end of media
482 * If we got a CHECK_CONDITION status, queue
483 * a request sense command.
486 cdrom_queue_request_sense(drive, NULL, NULL);
488 blk_dump_rq_flags(rq, PFX "bad rq");
489 cdrom_end_request(drive, 0);
492 /* retry, or handle the next request */
496 if (stat & ATA_ERR) {
497 struct request_queue *q = drive->queue;
500 spin_lock_irqsave(q->queue_lock, flags);
501 blkdev_dequeue_request(rq);
502 spin_unlock_irqrestore(q->queue_lock, flags);
506 cdrom_queue_request_sense(drive, rq->sense, rq);
508 cdrom_end_request(drive, 0);
513 static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
514 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
517 * Set up the device registers for transferring a packet command on DEV,
518 * expecting to later transfer XFERLEN bytes. HANDLER is the routine
519 * which actually transfers the command to the drive. If this is a
520 * drq_interrupt device, this routine will arrange for HANDLER to be
521 * called when the interrupt from the drive arrives. Otherwise, HANDLER
522 * will be called immediately after the drive is prepared for the transfer.
524 static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
526 ide_hwif_t *hwif = drive->hwif;
527 struct request *rq = hwif->rq;
530 xferlen = ide_cd_get_xferlen(rq);
532 ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
534 /* FIXME: for Virtual DMA we must check harder */
536 drive->dma = !hwif->dma_ops->dma_setup(drive);
538 /* set up the controller registers */
539 ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
540 xferlen, drive->dma);
542 if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
543 /* waiting for CDB interrupt, not DMA yet. */
545 drive->waiting_for_dma = 0;
548 ide_execute_command(drive, ATA_CMD_PACKET,
549 cdrom_transfer_packet_command,
550 ATAPI_WAIT_PC, ide_cd_expiry);
553 ide_execute_pkt_cmd(drive);
555 return cdrom_transfer_packet_command(drive);
560 * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
561 * registers must have already been prepared by cdrom_start_packet_command.
562 * HANDLER is the interrupt handler to call when the command completes or
563 * there's data ready.
565 #define ATAPI_MIN_CDB_BYTES 12
566 static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
568 ide_hwif_t *hwif = drive->hwif;
569 struct request *rq = hwif->rq;
571 ide_startstop_t startstop;
573 ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__);
575 if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
577 * Here we should have been called after receiving an interrupt
578 * from the device. DRQ should how be set.
581 /* check for errors */
582 if (cdrom_decode_status(drive, ATA_DRQ, NULL))
585 /* ok, next interrupt will be DMA interrupt */
587 drive->waiting_for_dma = 1;
589 /* otherwise, we must wait for DRQ to get set */
590 if (ide_wait_stat(&startstop, drive, ATA_DRQ,
591 ATA_BUSY, WAIT_READY))
595 /* arm the interrupt handler */
596 ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
598 /* ATAPI commands get padded out to 12 bytes minimum */
599 cmd_len = COMMAND_SIZE(rq->cmd[0]);
600 if (cmd_len < ATAPI_MIN_CDB_BYTES)
601 cmd_len = ATAPI_MIN_CDB_BYTES;
603 /* send the command to the device */
604 hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
606 /* start the DMA if need be */
608 hwif->dma_ops->dma_start(drive);
614 * Check the contents of the interrupt reason register from the cdrom
615 * and attempt to recover if there are problems. Returns 0 if everything's
616 * ok; nonzero if the request has been terminated.
618 static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
619 int len, int ireason, int rw)
621 ide_hwif_t *hwif = drive->hwif;
623 ide_debug_log(IDE_DBG_FUNC, "Call %s, ireason: 0x%x, rw: 0x%x\n",
624 __func__, ireason, rw);
627 * ireason == 0: the drive wants to receive data from us
628 * ireason == 2: the drive is expecting to transfer data to us
630 if (ireason == (!rw << 1))
632 else if (ireason == (rw << 1)) {
635 printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
636 drive->name, __func__);
638 ide_pad_transfer(drive, rw, len);
639 } else if (rw == 0 && ireason == 1) {
641 * Some drives (ASUS) seem to tell us that status info is
642 * available. Just get it and ignore.
644 (void)hwif->tp_ops->read_status(hwif);
647 /* drive wants a command packet, or invalid ireason... */
648 printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
649 drive->name, __func__, ireason);
652 if (rq->cmd_type == REQ_TYPE_ATA_PC)
653 rq->cmd_flags |= REQ_FAILED;
655 cdrom_end_request(drive, 0);
660 * Assume that the drive will always provide data in multiples of at least
661 * SECTOR_SIZE, as it gets hairy to keep track of the transfers otherwise.
663 static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
665 ide_debug_log(IDE_DBG_FUNC, "Call %s, len: %d\n", __func__, len);
667 if ((len % SECTOR_SIZE) == 0)
670 printk(KERN_ERR PFX "%s: %s: Bad transfer size %d\n", drive->name,
673 if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES)
674 printk(KERN_ERR PFX "This drive is not supported by this "
675 "version of the driver\n");
677 printk(KERN_ERR PFX "Trying to limit transfer sizes\n");
678 drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES;
684 static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
687 ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd_flags: 0x%x\n", __func__,
690 if (rq_data_dir(rq) == READ) {
691 unsigned short sectors_per_frame =
692 queue_hardsect_size(drive->queue) >> SECTOR_BITS;
693 int nskip = rq->sector & (sectors_per_frame - 1);
696 * If the requested sector doesn't start on a frame boundary,
697 * we must adjust the start of the transfer so that it does,
698 * and remember to skip the first few sectors.
700 * If the rq->current_nr_sectors field is larger than the size
701 * of the buffer, it will mean that we're to skip a number of
702 * sectors equal to the amount by which rq->current_nr_sectors
703 * is larger than the buffer size.
706 /* sanity check... */
707 if (rq->current_nr_sectors !=
708 bio_cur_sectors(rq->bio)) {
709 printk(KERN_ERR PFX "%s: %s: buffer botch (%u)\n",
710 drive->name, __func__,
711 rq->current_nr_sectors);
712 cdrom_end_request(drive, 0);
715 rq->current_nr_sectors += nskip;
719 /* set up the command */
720 rq->timeout = ATAPI_WAIT_PC;
726 * Fix up a possibly partially-processed request so that we can start it over
727 * entirely, or even put it back on the request queue.
729 static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq)
732 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
734 if (rq->buffer != bio_data(rq->bio)) {
736 (rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE;
738 rq->buffer = bio_data(rq->bio);
742 rq->current_nr_sectors = bio_cur_sectors(rq->bio);
743 rq->hard_cur_sectors = rq->current_nr_sectors;
744 rq->hard_nr_sectors = rq->nr_sectors;
745 rq->hard_sector = rq->sector;
746 rq->q->prep_rq_fn(rq->q, rq);
749 static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct request *rq)
751 ide_debug_log(IDE_DBG_FUNC, "Call %s, rq->cmd[0]: 0x%x\n",
752 __func__, rq->cmd[0]);
755 * Some of the trailing request sense fields are optional,
756 * and some drives don't send them. Sigh.
758 if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
759 rq->data_len > 0 && rq->data_len <= 5)
760 while (rq->data_len > 0) {
761 *(u8 *)rq->data++ = 0;
766 int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
767 int write, void *buffer, unsigned *bufflen,
768 struct request_sense *sense, int timeout,
769 unsigned int cmd_flags)
771 struct cdrom_info *info = drive->driver_data;
772 struct request_sense local_sense;
774 unsigned int flags = 0;
777 sense = &local_sense;
779 ide_debug_log(IDE_DBG_PC, "Call %s, cmd[0]: 0x%x, write: 0x%x, "
780 "timeout: %d, cmd_flags: 0x%x\n", __func__, cmd[0], write,
783 /* start of retry loop */
788 rq = blk_get_request(drive->queue, write, __GFP_WAIT);
790 memcpy(rq->cmd, cmd, BLK_MAX_CDB);
791 rq->cmd_type = REQ_TYPE_ATA_PC;
793 rq->cmd_flags |= cmd_flags;
794 rq->timeout = timeout;
797 rq->data_len = *bufflen;
800 error = blk_execute_rq(drive->queue, info->disk, rq, 0);
803 *bufflen = rq->data_len;
805 flags = rq->cmd_flags;
809 * FIXME: we should probably abort/retry or something in case of
812 if (flags & REQ_FAILED) {
814 * The request failed. Retry if it was due to a unit
815 * attention status (usually means media was changed).
817 struct request_sense *reqbuf = sense;
819 if (reqbuf->sense_key == UNIT_ATTENTION)
820 cdrom_saw_media_change(drive);
821 else if (reqbuf->sense_key == NOT_READY &&
822 reqbuf->asc == 4 && reqbuf->ascq != 4) {
824 * The drive is in the process of loading
825 * a disk. Retry, but wait a little to give
826 * the drive time to complete the load.
830 /* otherwise, don't retry */
836 /* end of retry loop */
837 } while ((flags & REQ_FAILED) && retries >= 0);
839 /* return an error if the command failed */
840 return (flags & REQ_FAILED) ? -EIO : 0;
844 * Called from blk_end_request_callback() after the data of the request is
845 * completed and before the request itself is completed. By returning value '1',
846 * blk_end_request_callback() returns immediately without completing it.
848 static int cdrom_newpc_intr_dummy_cb(struct request *rq)
853 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
855 ide_hwif_t *hwif = drive->hwif;
856 struct request *rq = hwif->rq;
857 xfer_func_t *xferfunc;
858 ide_expiry_t *expiry = NULL;
859 int dma_error = 0, dma, stat, thislen, uptodate = 0;
860 int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
861 unsigned int timeout;
865 ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x\n",
866 __func__, rq->cmd[0], write);
868 /* check for errors */
872 dma_error = hwif->dma_ops->dma_end(drive);
874 printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name,
875 write ? "write" : "read");
880 if (cdrom_decode_status(drive, 0, &stat))
883 /* using dma, transfer is complete now */
886 return ide_error(drive, "dma error", stat);
887 if (blk_fs_request(rq)) {
888 ide_end_request(drive, 1, rq->nr_sectors);
894 ide_read_bcount_and_ireason(drive, &len, &ireason);
896 thislen = blk_fs_request(rq) ? len : rq->data_len;
900 ide_debug_log(IDE_DBG_PC, "%s: DRQ: stat: 0x%x, thislen: %d\n",
901 __func__, stat, thislen);
903 /* If DRQ is clear, the command has completed. */
904 if ((stat & ATA_DRQ) == 0) {
905 if (blk_fs_request(rq)) {
907 * If we're not done reading/writing, complain.
908 * Otherwise, complete the command normally.
911 if (rq->current_nr_sectors > 0) {
912 printk(KERN_ERR PFX "%s: %s: data underrun "
914 drive->name, __func__,
915 rq->current_nr_sectors);
917 rq->cmd_flags |= REQ_FAILED;
920 cdrom_end_request(drive, uptodate);
922 } else if (!blk_pc_request(rq)) {
923 ide_cd_request_sense_fixup(drive, rq);
924 /* complain if we still have data left to transfer */
925 uptodate = rq->data_len ? 0 : 1;
930 /* check which way to transfer data */
931 if (ide_cd_check_ireason(drive, rq, len, ireason, write))
934 if (blk_fs_request(rq)) {
938 if (ide_cd_check_transfer_size(drive, len)) {
939 cdrom_end_request(drive, 0);
944 * First, figure out if we need to bit-bucket
945 * any of the leading sectors.
947 nskip = min_t(int, rq->current_nr_sectors
948 - bio_cur_sectors(rq->bio),
951 ide_pad_transfer(drive, write, nskip << 9);
952 rq->current_nr_sectors -= nskip;
953 thislen -= (nskip << 9);
960 xferfunc = hwif->tp_ops->output_data;
963 xferfunc = hwif->tp_ops->input_data;
966 ide_debug_log(IDE_DBG_PC, "%s: data transfer, rq->cmd_type: 0x%x, "
967 "ireason: 0x%x\n", __func__, rq->cmd_type, ireason);
970 while (thislen > 0) {
971 u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
972 int blen = rq->data_len;
976 if (blk_fs_request(rq)) {
978 blen = rq->current_nr_sectors << 9;
980 ptr = bio_data(rq->bio);
981 blen = bio_iovec(rq->bio)->bv_len;
986 if (blk_fs_request(rq) && !write)
988 * If the buffers are full, pipe the rest into
991 ide_pad_transfer(drive, 0, thislen);
993 printk(KERN_ERR PFX "%s: confused, missing data\n",
995 blk_dump_rq_flags(rq, rq_data_dir(rq)
996 ? "cdrom_newpc_intr, write"
997 : "cdrom_newpc_intr, read");
1005 xferfunc(drive, NULL, ptr, blen);
1010 if (blk_fs_request(rq)) {
1012 rq->nr_sectors -= (blen >> 9);
1013 rq->current_nr_sectors -= (blen >> 9);
1014 rq->sector += (blen >> 9);
1016 if (rq->current_nr_sectors == 0 && rq->nr_sectors)
1017 cdrom_end_request(drive, 1);
1019 rq->data_len -= blen;
1022 * The request can't be completed until DRQ is cleared.
1023 * So complete the data, but don't complete the request
1024 * using the dummy function for the callback feature
1025 * of blk_end_request_callback().
1028 blk_end_request_callback(rq, 0, blen,
1029 cdrom_newpc_intr_dummy_cb);
1033 if (!write && blk_sense_request(rq))
1034 rq->sense_len += blen;
1037 /* pad, if necessary */
1038 if (!blk_fs_request(rq) && len > 0)
1039 ide_pad_transfer(drive, write, len);
1041 if (blk_pc_request(rq)) {
1042 timeout = rq->timeout;
1044 timeout = ATAPI_WAIT_PC;
1045 if (!blk_fs_request(rq))
1046 expiry = ide_cd_expiry;
1049 ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
1053 if (blk_pc_request(rq)) {
1054 unsigned int dlen = rq->data_len;
1059 if (blk_end_request(rq, 0, dlen))
1065 rq->cmd_flags |= REQ_FAILED;
1066 cdrom_end_request(drive, uptodate);
1071 static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
1073 struct cdrom_info *cd = drive->driver_data;
1074 int write = rq_data_dir(rq) == WRITE;
1075 unsigned short sectors_per_frame =
1076 queue_hardsect_size(drive->queue) >> SECTOR_BITS;
1078 ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
1079 "secs_per_frame: %u\n",
1080 __func__, rq->cmd[0], write, sectors_per_frame);
1083 /* disk has become write protected */
1084 if (get_disk_ro(cd->disk)) {
1085 cdrom_end_request(drive, 0);
1090 * We may be retrying this request after an error. Fix up any
1091 * weirdness which might be present in the request packet.
1093 ide_cd_restore_request(drive, rq);
1096 /* use DMA, if possible / writes *must* be hardware frame aligned */
1097 if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
1098 (rq->sector & (sectors_per_frame - 1))) {
1100 cdrom_end_request(drive, 0);
1105 drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
1108 cd->devinfo.media_written = 1;
1113 static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
1116 ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, "
1117 "rq->cmd_type: 0x%x\n", __func__, rq->cmd[0],
1120 if (blk_pc_request(rq))
1121 rq->cmd_flags |= REQ_QUIET;
1123 rq->cmd_flags &= ~REQ_FAILED;
1128 if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
1129 struct request_queue *q = drive->queue;
1130 unsigned int alignment;
1134 buf = bio_data(rq->bio);
1138 drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
1141 * check if dma is safe
1143 * NOTE! The "len" and "addr" checks should possibly have
1146 alignment = queue_dma_alignment(q) | q->dma_pad_mask;
1147 if ((unsigned long)buf & alignment
1148 || rq->data_len & q->dma_pad_mask
1149 || object_is_on_stack(buf))
1154 static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
1157 ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, "
1158 "rq->cmd_type: 0x%x, block: %llu\n",
1159 __func__, rq->cmd[0], rq->cmd_type,
1160 (unsigned long long)block);
1162 if (blk_fs_request(rq)) {
1163 if (cdrom_start_rw(drive, rq) == ide_stopped)
1166 if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
1168 } else if (blk_sense_request(rq) || blk_pc_request(rq) ||
1169 rq->cmd_type == REQ_TYPE_ATA_PC) {
1171 rq->timeout = ATAPI_WAIT_PC;
1173 cdrom_do_block_pc(drive, rq);
1174 } else if (blk_special_request(rq)) {
1175 /* right now this can only be a reset... */
1176 cdrom_end_request(drive, 1);
1179 blk_dump_rq_flags(rq, DRV_NAME " bad flags");
1180 cdrom_end_request(drive, 0);
1184 return cdrom_start_packet_command(drive);
1190 * Routines which queue packet commands take as a final argument a pointer to a
1191 * request_sense struct. If execution of the command results in an error with a
1192 * CHECK CONDITION status, this structure will be filled with the results of the
1193 * subsequent request sense command. The pointer can also be NULL, in which case
1194 * no sense information is returned.
1196 static void msf_from_bcd(struct atapi_msf *msf)
1198 msf->minute = bcd2bin(msf->minute);
1199 msf->second = bcd2bin(msf->second);
1200 msf->frame = bcd2bin(msf->frame);
1203 int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
1205 struct cdrom_info *info = drive->driver_data;
1206 struct cdrom_device_info *cdi = &info->devinfo;
1207 unsigned char cmd[BLK_MAX_CDB];
1209 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1211 memset(cmd, 0, BLK_MAX_CDB);
1212 cmd[0] = GPCMD_TEST_UNIT_READY;
1215 * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
1216 * instead of supporting the LOAD_UNLOAD opcode.
1218 cmd[7] = cdi->sanyo_slot % 3;
1220 return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, sense, 0, REQ_QUIET);
1223 static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
1224 unsigned long *sectors_per_frame,
1225 struct request_sense *sense)
1233 unsigned char cmd[BLK_MAX_CDB];
1234 unsigned len = sizeof(capbuf);
1237 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1239 memset(cmd, 0, BLK_MAX_CDB);
1240 cmd[0] = GPCMD_READ_CDVD_CAPACITY;
1242 stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0,
1248 * Sanity check the given block size
1250 blocklen = be32_to_cpu(capbuf.blocklen);
1258 printk(KERN_ERR PFX "%s: weird block size %u\n",
1259 drive->name, blocklen);
1260 printk(KERN_ERR PFX "%s: default to 2kb block size\n",
1266 *capacity = 1 + be32_to_cpu(capbuf.lba);
1267 *sectors_per_frame = blocklen >> SECTOR_BITS;
1269 ide_debug_log(IDE_DBG_PROBE, "%s: cap: %lu, sectors_per_frame: %lu\n",
1270 __func__, *capacity, *sectors_per_frame);
1275 static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
1276 int format, char *buf, int buflen,
1277 struct request_sense *sense)
1279 unsigned char cmd[BLK_MAX_CDB];
1281 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1283 memset(cmd, 0, BLK_MAX_CDB);
1285 cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
1287 cmd[7] = (buflen >> 8);
1288 cmd[8] = (buflen & 0xff);
1289 cmd[9] = (format << 6);
1294 return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, sense, 0, REQ_QUIET);
1297 /* Try to read the entire TOC for the disk into our internal buffer. */
1298 int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
1300 int stat, ntracks, i;
1301 struct cdrom_info *info = drive->driver_data;
1302 struct cdrom_device_info *cdi = &info->devinfo;
1303 struct atapi_toc *toc = info->toc;
1305 struct atapi_toc_header hdr;
1306 struct atapi_toc_entry ent;
1309 unsigned long sectors_per_frame = SECTORS_PER_FRAME;
1311 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1314 /* try to allocate space */
1315 toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
1317 printk(KERN_ERR PFX "%s: No cdrom TOC buffer!\n",
1325 * Check to see if the existing data is still valid. If it is,
1328 (void) cdrom_check_status(drive, sense);
1330 if (drive->atapi_flags & IDE_AFLAG_TOC_VALID)
1333 /* try to get the total cdrom capacity and sector size */
1334 stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame,
1337 toc->capacity = 0x1fffff;
1339 set_capacity(info->disk, toc->capacity * sectors_per_frame);
1340 /* save a private copy of the TOC capacity for error handling */
1341 drive->probed_capacity = toc->capacity * sectors_per_frame;
1343 blk_queue_hardsect_size(drive->queue,
1344 sectors_per_frame << SECTOR_BITS);
1346 /* first read just the header, so we know how long the TOC is */
1347 stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
1348 sizeof(struct atapi_toc_header), sense);
1352 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
1353 toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
1354 toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
1357 ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
1360 if (ntracks > MAX_TRACKS)
1361 ntracks = MAX_TRACKS;
1363 /* now read the whole schmeer */
1364 stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0,
1366 sizeof(struct atapi_toc_header) +
1368 sizeof(struct atapi_toc_entry), sense);
1370 if (stat && toc->hdr.first_track > 1) {
1372 * Cds with CDI tracks only don't have any TOC entries, despite
1373 * of this the returned values are
1374 * first_track == last_track = number of CDI tracks + 1,
1375 * so that this case is indistinguishable from the same layout
1376 * plus an additional audio track. If we get an error for the
1377 * regular case, we assume a CDI without additional audio
1378 * tracks. In this case the readable TOC is empty (CDI tracks
1379 * are not included) and only holds the Leadout entry.
1384 stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0,
1386 sizeof(struct atapi_toc_header) +
1388 sizeof(struct atapi_toc_entry),
1393 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
1394 toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
1395 toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
1397 toc->hdr.first_track = CDROM_LEADOUT;
1398 toc->hdr.last_track = CDROM_LEADOUT;
1405 toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
1407 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
1408 toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
1409 toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
1412 for (i = 0; i <= ntracks; i++) {
1413 if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
1414 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
1415 toc->ent[i].track = bcd2bin(toc->ent[i].track);
1416 msf_from_bcd(&toc->ent[i].addr.msf);
1418 toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
1419 toc->ent[i].addr.msf.second,
1420 toc->ent[i].addr.msf.frame);
1423 if (toc->hdr.first_track != CDROM_LEADOUT) {
1424 /* read the multisession information */
1425 stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
1426 sizeof(ms_tmp), sense);
1430 toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
1432 ms_tmp.hdr.last_track = CDROM_LEADOUT;
1433 ms_tmp.hdr.first_track = ms_tmp.hdr.last_track;
1434 toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
1437 if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
1438 /* re-read multisession information using MSF format */
1439 stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
1440 sizeof(ms_tmp), sense);
1444 msf_from_bcd(&ms_tmp.ent.addr.msf);
1445 toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
1446 ms_tmp.ent.addr.msf.second,
1447 ms_tmp.ent.addr.msf.frame);
1450 toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
1452 /* now try to get the total cdrom capacity */
1453 stat = cdrom_get_last_written(cdi, &last_written);
1454 if (!stat && (last_written > toc->capacity)) {
1455 toc->capacity = last_written;
1456 set_capacity(info->disk, toc->capacity * sectors_per_frame);
1457 drive->probed_capacity = toc->capacity * sectors_per_frame;
1460 /* Remember that we've read this stuff. */
1461 drive->atapi_flags |= IDE_AFLAG_TOC_VALID;
1466 int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
1468 struct cdrom_info *info = drive->driver_data;
1469 struct cdrom_device_info *cdi = &info->devinfo;
1470 struct packet_command cgc;
1471 int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
1473 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1475 if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
1476 size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
1478 init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
1480 /* we seem to get stat=0x01,err=0x00 the first time (??) */
1481 stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
1484 } while (--attempts);
1488 void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
1490 struct cdrom_info *cd = drive->driver_data;
1491 u16 curspeed, maxspeed;
1493 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1495 if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
1496 curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
1497 maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
1499 curspeed = be16_to_cpup((__be16 *)&buf[8 + 14]);
1500 maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
1503 ide_debug_log(IDE_DBG_PROBE, "%s: curspeed: %u, maxspeed: %u\n",
1504 __func__, curspeed, maxspeed);
1506 cd->current_speed = (curspeed + (176/2)) / 176;
1507 cd->max_speed = (maxspeed + (176/2)) / 176;
1510 #define IDE_CD_CAPABILITIES \
1511 (CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | \
1512 CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | \
1513 CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R | \
1514 CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_GENERIC_PACKET | \
1515 CDC_MO_DRIVE | CDC_MRW | CDC_MRW_W | CDC_RAM)
1517 static struct cdrom_device_ops ide_cdrom_dops = {
1518 .open = ide_cdrom_open_real,
1519 .release = ide_cdrom_release_real,
1520 .drive_status = ide_cdrom_drive_status,
1521 .media_changed = ide_cdrom_check_media_change_real,
1522 .tray_move = ide_cdrom_tray_move,
1523 .lock_door = ide_cdrom_lock_door,
1524 .select_speed = ide_cdrom_select_speed,
1525 .get_last_session = ide_cdrom_get_last_session,
1526 .get_mcn = ide_cdrom_get_mcn,
1527 .reset = ide_cdrom_reset,
1528 .audio_ioctl = ide_cdrom_audio_ioctl,
1529 .capability = IDE_CD_CAPABILITIES,
1530 .generic_packet = ide_cdrom_packet,
1533 static int ide_cdrom_register(ide_drive_t *drive, int nslots)
1535 struct cdrom_info *info = drive->driver_data;
1536 struct cdrom_device_info *devinfo = &info->devinfo;
1538 ide_debug_log(IDE_DBG_PROBE, "Call %s, nslots: %d\n", __func__, nslots);
1540 devinfo->ops = &ide_cdrom_dops;
1541 devinfo->speed = info->current_speed;
1542 devinfo->capacity = nslots;
1543 devinfo->handle = drive;
1544 strcpy(devinfo->name, drive->name);
1546 if (drive->atapi_flags & IDE_AFLAG_NO_SPEED_SELECT)
1547 devinfo->mask |= CDC_SELECT_SPEED;
1549 devinfo->disk = info->disk;
1550 return register_cdrom(devinfo);
1553 static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
1555 struct cdrom_info *cd = drive->driver_data;
1556 struct cdrom_device_info *cdi = &cd->devinfo;
1557 u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
1558 mechtype_t mechtype;
1561 ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->media: 0x%x, "
1562 "drive->atapi_flags: 0x%lx\n", __func__, drive->media,
1563 drive->atapi_flags);
1565 cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
1566 CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
1567 CDC_MO_DRIVE | CDC_RAM);
1569 if (drive->media == ide_optical) {
1570 cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
1571 printk(KERN_ERR PFX "%s: ATAPI magneto-optical drive\n",
1576 if (drive->atapi_flags & IDE_AFLAG_PRE_ATAPI12) {
1577 drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
1578 cdi->mask &= ~CDC_PLAY_AUDIO;
1583 * We have to cheat a little here. the packet will eventually be queued
1584 * with ide_cdrom_packet(), which extracts the drive from cdi->handle.
1585 * Since this device hasn't been registered with the Uniform layer yet,
1586 * it can't do this. Same goes for cdi->ops.
1588 cdi->handle = drive;
1589 cdi->ops = &ide_cdrom_dops;
1591 if (ide_cdrom_get_capabilities(drive, buf))
1594 if ((buf[8 + 6] & 0x01) == 0)
1595 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
1596 if (buf[8 + 6] & 0x08)
1597 drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
1598 if (buf[8 + 3] & 0x01)
1599 cdi->mask &= ~CDC_CD_R;
1600 if (buf[8 + 3] & 0x02)
1601 cdi->mask &= ~(CDC_CD_RW | CDC_RAM);
1602 if (buf[8 + 2] & 0x38)
1603 cdi->mask &= ~CDC_DVD;
1604 if (buf[8 + 3] & 0x20)
1605 cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
1606 if (buf[8 + 3] & 0x10)
1607 cdi->mask &= ~CDC_DVD_R;
1608 if ((buf[8 + 4] & 0x01) || (drive->atapi_flags & IDE_AFLAG_PLAY_AUDIO_OK))
1609 cdi->mask &= ~CDC_PLAY_AUDIO;
1611 mechtype = buf[8 + 6] >> 5;
1612 if (mechtype == mechtype_caddy ||
1613 mechtype == mechtype_popup ||
1614 (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE))
1615 cdi->mask |= CDC_CLOSE_TRAY;
1617 if (cdi->sanyo_slot > 0) {
1618 cdi->mask &= ~CDC_SELECT_DISC;
1620 } else if (mechtype == mechtype_individual_changer ||
1621 mechtype == mechtype_cartridge_changer) {
1622 nslots = cdrom_number_of_slots(cdi);
1624 cdi->mask &= ~CDC_SELECT_DISC;
1627 ide_cdrom_update_speed(drive, buf);
1629 printk(KERN_INFO PFX "%s: ATAPI", drive->name);
1631 /* don't print speed if the drive reported 0 */
1633 printk(KERN_CONT " %dX", cd->max_speed);
1635 printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM");
1637 if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
1638 printk(KERN_CONT " DVD%s%s",
1639 (cdi->mask & CDC_DVD_R) ? "" : "-R",
1640 (cdi->mask & CDC_DVD_RAM) ? "" : "/RAM");
1642 if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
1643 printk(KERN_CONT " CD%s%s",
1644 (cdi->mask & CDC_CD_R) ? "" : "-R",
1645 (cdi->mask & CDC_CD_RW) ? "" : "/RW");
1647 if ((cdi->mask & CDC_SELECT_DISC) == 0)
1648 printk(KERN_CONT " changer w/%d slots", nslots);
1650 printk(KERN_CONT " drive");
1652 printk(KERN_CONT ", %dkB Cache\n",
1653 be16_to_cpup((__be16 *)&buf[8 + 12]));
1658 /* standard prep_rq_fn that builds 10 byte cmds */
1659 static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
1661 int hard_sect = queue_hardsect_size(q);
1662 long block = (long)rq->hard_sector / (hard_sect >> 9);
1663 unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
1665 memset(rq->cmd, 0, BLK_MAX_CDB);
1667 if (rq_data_dir(rq) == READ)
1668 rq->cmd[0] = GPCMD_READ_10;
1670 rq->cmd[0] = GPCMD_WRITE_10;
1675 rq->cmd[2] = (block >> 24) & 0xff;
1676 rq->cmd[3] = (block >> 16) & 0xff;
1677 rq->cmd[4] = (block >> 8) & 0xff;
1678 rq->cmd[5] = block & 0xff;
1681 * and transfer length
1683 rq->cmd[7] = (blocks >> 8) & 0xff;
1684 rq->cmd[8] = blocks & 0xff;
1690 * Most of the SCSI commands are supported directly by ATAPI devices.
1691 * This transform handles the few exceptions.
1693 static int ide_cdrom_prep_pc(struct request *rq)
1697 /* transform 6-byte read/write commands to the 10-byte version */
1698 if (c[0] == READ_6 || c[0] == WRITE_6) {
1705 c[0] += (READ_10 - READ_6);
1711 * it's silly to pretend we understand 6-byte sense commands, just
1712 * reject with ILLEGAL_REQUEST and the caller should take the
1713 * appropriate action
1715 if (c[0] == MODE_SENSE || c[0] == MODE_SELECT) {
1716 rq->errors = ILLEGAL_REQUEST;
1717 return BLKPREP_KILL;
1723 static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq)
1725 if (blk_fs_request(rq))
1726 return ide_cdrom_prep_fs(q, rq);
1727 else if (blk_pc_request(rq))
1728 return ide_cdrom_prep_pc(rq);
1733 struct cd_list_entry {
1734 const char *id_model;
1735 const char *id_firmware;
1736 unsigned int cd_flags;
1739 #ifdef CONFIG_IDE_PROC_FS
1740 static sector_t ide_cdrom_capacity(ide_drive_t *drive)
1742 unsigned long capacity, sectors_per_frame;
1744 if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL))
1747 return capacity * sectors_per_frame;
1750 static int proc_idecd_read_capacity(char *page, char **start, off_t off,
1751 int count, int *eof, void *data)
1753 ide_drive_t *drive = data;
1756 len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive));
1757 PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
1760 static ide_proc_entry_t idecd_proc[] = {
1761 { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL },
1762 { NULL, 0, NULL, NULL }
1765 static ide_proc_entry_t *ide_cd_proc_entries(ide_drive_t *drive)
1770 static const struct ide_proc_devset *ide_cd_proc_devsets(ide_drive_t *drive)
1776 static const struct cd_list_entry ide_cd_quirks_list[] = {
1777 /* Limit transfer size per interrupt. */
1778 { "SAMSUNG CD-ROM SCR-2430", NULL, IDE_AFLAG_LIMIT_NFRAMES },
1779 { "SAMSUNG CD-ROM SCR-2432", NULL, IDE_AFLAG_LIMIT_NFRAMES },
1780 /* SCR-3231 doesn't support the SET_CD_SPEED command. */
1781 { "SAMSUNG CD-ROM SCR-3231", NULL, IDE_AFLAG_NO_SPEED_SELECT },
1782 /* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
1783 { "NEC CD-ROM DRIVE:260", "1.01", IDE_AFLAG_TOCADDR_AS_BCD |
1784 IDE_AFLAG_PRE_ATAPI12, },
1785 /* Vertos 300, some versions of this drive like to talk BCD. */
1786 { "V003S0DS", NULL, IDE_AFLAG_VERTOS_300_SSD, },
1787 /* Vertos 600 ESD. */
1788 { "V006E0DS", NULL, IDE_AFLAG_VERTOS_600_ESD, },
1790 * Sanyo 3 CD changer uses a non-standard command for CD changing
1791 * (by default standard ATAPI support for CD changers is used).
1793 { "CD-ROM CDR-C3 G", NULL, IDE_AFLAG_SANYO_3CD },
1794 { "CD-ROM CDR-C3G", NULL, IDE_AFLAG_SANYO_3CD },
1795 { "CD-ROM CDR_C36", NULL, IDE_AFLAG_SANYO_3CD },
1796 /* Stingray 8X CD-ROM. */
1797 { "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_AFLAG_PRE_ATAPI12 },
1799 * ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
1800 * mode sense page capabilities size, but older drives break.
1802 { "ATAPI CD ROM DRIVE 50X MAX", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
1803 { "WPI CDS-32X", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
1804 /* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
1805 { "", "241N", IDE_AFLAG_LE_SPEED_FIELDS },
1807 * Some drives used by Apple don't advertise audio play
1808 * but they do support reading TOC & audio datas.
1810 { "MATSHITADVD-ROM SR-8187", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1811 { "MATSHITADVD-ROM SR-8186", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1812 { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1813 { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1814 { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1815 { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1816 { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE },
1817 { "TEAC CD-ROM CD-224E", NULL, IDE_AFLAG_NO_AUTOCLOSE },
1821 static unsigned int ide_cd_flags(u16 *id)
1823 const struct cd_list_entry *cle = ide_cd_quirks_list;
1825 while (cle->id_model) {
1826 if (strcmp(cle->id_model, (char *)&id[ATA_ID_PROD]) == 0 &&
1827 (cle->id_firmware == NULL ||
1828 strstr((char *)&id[ATA_ID_FW_REV], cle->id_firmware)))
1829 return cle->cd_flags;
1836 static int ide_cdrom_setup(ide_drive_t *drive)
1838 struct cdrom_info *cd = drive->driver_data;
1839 struct cdrom_device_info *cdi = &cd->devinfo;
1840 u16 *id = drive->id;
1841 char *fw_rev = (char *)&id[ATA_ID_FW_REV];
1844 ide_debug_log(IDE_DBG_PROBE, "Call %s\n", __func__);
1846 blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
1847 blk_queue_dma_alignment(drive->queue, 31);
1848 blk_queue_update_dma_pad(drive->queue, 15);
1849 drive->queue->unplug_delay = (1 * HZ) / 1000;
1850 if (!drive->queue->unplug_delay)
1851 drive->queue->unplug_delay = 1;
1853 drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
1854 drive->atapi_flags = IDE_AFLAG_NO_EJECT | ide_cd_flags(id);
1856 if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
1857 fw_rev[4] == '1' && fw_rev[6] <= '2')
1858 drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
1859 IDE_AFLAG_TOCADDR_AS_BCD);
1860 else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) &&
1861 fw_rev[4] == '1' && fw_rev[6] <= '2')
1862 drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD;
1863 else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD)
1864 /* 3 => use CD in slot 0 */
1865 cdi->sanyo_slot = 3;
1867 nslots = ide_cdrom_probe_capabilities(drive);
1869 /* set correct block size */
1870 blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
1872 if (ide_cdrom_register(drive, nslots)) {
1873 printk(KERN_ERR PFX "%s: %s failed to register device with the"
1874 " cdrom driver.\n", drive->name, __func__);
1875 cd->devinfo.handle = NULL;
1879 ide_proc_register_driver(drive, cd->driver);
1883 static void ide_cd_remove(ide_drive_t *drive)
1885 struct cdrom_info *info = drive->driver_data;
1887 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1889 ide_proc_unregister_driver(drive, info->driver);
1891 del_gendisk(info->disk);
1896 static void ide_cd_release(struct kref *kref)
1898 struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
1899 struct cdrom_device_info *devinfo = &info->devinfo;
1900 ide_drive_t *drive = info->drive;
1901 struct gendisk *g = info->disk;
1903 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
1906 if (devinfo->handle == drive)
1907 unregister_cdrom(devinfo);
1908 drive->driver_data = NULL;
1909 blk_queue_prep_rq(drive->queue, NULL);
1910 g->private_data = NULL;
1915 static int ide_cd_probe(ide_drive_t *);
1917 static ide_driver_t ide_cdrom_driver = {
1919 .owner = THIS_MODULE,
1920 .name = "ide-cdrom",
1921 .bus = &ide_bus_type,
1923 .probe = ide_cd_probe,
1924 .remove = ide_cd_remove,
1925 .version = IDECD_VERSION,
1926 .do_request = ide_cd_do_request,
1927 .end_request = ide_end_request,
1928 .error = __ide_error,
1929 #ifdef CONFIG_IDE_PROC_FS
1930 .proc_entries = ide_cd_proc_entries,
1931 .proc_devsets = ide_cd_proc_devsets,
1935 static int idecd_open(struct block_device *bdev, fmode_t mode)
1937 struct cdrom_info *info = ide_cd_get(bdev->bd_disk);
1943 rc = cdrom_open(&info->devinfo, bdev, mode);
1951 static int idecd_release(struct gendisk *disk, fmode_t mode)
1953 struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
1955 cdrom_release(&info->devinfo, mode);
1962 static int idecd_set_spindown(struct cdrom_device_info *cdi, unsigned long arg)
1964 struct packet_command cgc;
1969 if (copy_from_user(&spindown, (void __user *)arg, sizeof(char)))
1972 init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
1974 stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
1978 buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
1979 return cdrom_mode_select(cdi, &cgc);
1982 static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg)
1984 struct packet_command cgc;
1989 init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
1991 stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
1995 spindown = buffer[11] & 0x0f;
1996 if (copy_to_user((void __user *)arg, &spindown, sizeof(char)))
2001 static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
2002 unsigned int cmd, unsigned long arg)
2004 struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
2008 case CDROMSETSPINDOWN:
2009 return idecd_set_spindown(&info->devinfo, arg);
2010 case CDROMGETSPINDOWN:
2011 return idecd_get_spindown(&info->devinfo, arg);
2016 err = generic_ide_ioctl(info->drive, bdev, cmd, arg);
2018 err = cdrom_ioctl(&info->devinfo, bdev, mode, cmd, arg);
2023 static int idecd_media_changed(struct gendisk *disk)
2025 struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
2026 return cdrom_media_changed(&info->devinfo);
2029 static int idecd_revalidate_disk(struct gendisk *disk)
2031 struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
2032 struct request_sense sense;
2034 ide_cd_read_toc(info->drive, &sense);
2039 static struct block_device_operations idecd_ops = {
2040 .owner = THIS_MODULE,
2042 .release = idecd_release,
2043 .locked_ioctl = idecd_ioctl,
2044 .media_changed = idecd_media_changed,
2045 .revalidate_disk = idecd_revalidate_disk
2048 /* module options */
2049 static char *ignore;
2050 module_param(ignore, charp, 0400);
2052 static unsigned long debug_mask;
2053 module_param(debug_mask, ulong, 0644);
2055 MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
2057 static int ide_cd_probe(ide_drive_t *drive)
2059 struct cdrom_info *info;
2061 struct request_sense sense;
2063 ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->driver_req: %s, "
2064 "drive->media: 0x%x\n", __func__, drive->driver_req,
2067 if (!strstr("ide-cdrom", drive->driver_req))
2070 if (drive->media != ide_cdrom && drive->media != ide_optical)
2073 /* skip drives that we were told to ignore */
2074 if (ignore != NULL) {
2075 if (strstr(ignore, drive->name)) {
2076 printk(KERN_INFO PFX "ignoring drive %s\n",
2082 drive->debug_mask = debug_mask;
2084 info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
2086 printk(KERN_ERR PFX "%s: Can't allocate a cdrom structure\n",
2091 g = alloc_disk(1 << PARTN_BITS);
2095 ide_init_disk(g, drive);
2097 kref_init(&info->kref);
2099 info->drive = drive;
2100 info->driver = &ide_cdrom_driver;
2103 g->private_data = &info->driver;
2105 drive->driver_data = info;
2108 g->driverfs_dev = &drive->gendev;
2109 g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
2110 if (ide_cdrom_setup(drive)) {
2111 ide_cd_release(&info->kref);
2115 ide_cd_read_toc(drive, &sense);
2116 g->fops = &idecd_ops;
2117 g->flags |= GENHD_FL_REMOVABLE;
2127 static void __exit ide_cdrom_exit(void)
2129 driver_unregister(&ide_cdrom_driver.gen_driver);
2132 static int __init ide_cdrom_init(void)
2134 printk(KERN_INFO DRV_NAME " driver " IDECD_VERSION "\n");
2135 return driver_register(&ide_cdrom_driver.gen_driver);
2138 MODULE_ALIAS("ide:*m-cdrom*");
2139 MODULE_ALIAS("ide-cd");
2140 module_init(ide_cdrom_init);
2141 module_exit(ide_cdrom_exit);
2142 MODULE_LICENSE("GPL");