Cornelia Huck

cornelia.huck@de.ibm.com

2007 IBM Corp. This documentation is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA For more details see the file COPYING in the source distribution of Linux. This document describes the interfaces available for device drivers that drive s390 based channel attached devices. This includes interfaces for interaction with the hardware and interfaces for interacting with the common driver core. Those interfaces are provided by the s390 common I/O layer. The document assumes a familarity with the technical terms associated with the s390 channel I/O architecture. For a description of this architecture, please refer to the "z/Architecture: Principles of Operation", IBM publication no. SA22-7832. While most I/O devices on a s390 system are typically driven through the channel I/O mechanism described here, there are various other methods (like the diag interface). These are out of the scope of this document. Some additional information can also be found in the kernel source under Documentation/s390/driver-model.txt. The ccw bus typically contains the majority of devices available to a s390 system. Named after the channel command word (ccw), the basic command structure used to address its devices, the ccw bus contains so-called channel attached devices. They are addressed via subchannels, visible on the css bus. A device driver, however, will never interact with the subchannel directly, but only via the device on the ccw bus, the ccw device. Some hardware structures have been translated into C structures for use by the common I/O layer and device drivers. For more information on the hardware structures represented here, please consult the Principles of Operation. !Iinclude/asm-s390/cio.h Devices that want to initiate channel I/O need to attach to the ccw bus. Interaction with the driver core is done via the common I/O layer, which provides the abstractions of ccw devices and ccw device drivers. The functions that initiate or terminate channel I/O all act upon a ccw device structure. Device drivers must not bypass those functions or strange side effects may happen. !Iinclude/asm-s390/ccwdev.h !Edrivers/s390/cio/device.c !Edrivers/s390/cio/device_ops.c !Edrivers/s390/cio/airq.c The channel-measurement facility provides a means to collect measurement data which is made available by the channel subsystem for each channel attached device. !Iinclude/asm-s390/cmb.h !Edrivers/s390/cio/cmf.c The ccwgroup bus only contains artificial devices, created by the user. Many networking devices (e.g. qeth) are in fact composed of several ccw devices (like read, write and data channel for qeth). The ccwgroup bus provides a mechanism to create a meta-device which contains those ccw devices as slave devices and can be associated with the netdevice. !Iinclude/asm-s390/ccwgroup.h !Edrivers/s390/cio/ccwgroup.c