config IWLWIFI tristate config IWLCORE tristate "Intel Wireless Wifi Core" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select IWLWIFI select MAC80211_LEDS if IWLWIFI_LEDS select LEDS_CLASS if IWLWIFI_LEDS select RFKILL if IWLWIFI_RFKILL select RFKILL_INPUT if IWLWIFI_RFKILL config IWLWIFI_LEDS bool default n config IWLWIFI_RUN_TIME_CALIB bool depends on IWLCORE default n ---help--- This option will enable run time calibration for the iwlwifi driver. These calibrations are Sensitivity and Chain Noise. config IWLWIFI_RFKILL boolean "IWLWIFI RF kill support" depends on IWLCORE config IWL4965 tristate "Intel Wireless WiFi 4965AGN" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select FW_LOADER select IWLCORE ---help--- Select to build the driver supporting the: Intel Wireless WiFi Link 4965AGN This driver uses the kernel's mac80211 subsystem. In order to use this driver, you will need a microcode (uCode) image for it. You can obtain the microcode from: . The microcode is typically installed in /lib/firmware. You can look in the hotplug script /etc/hotplug/firmware.agent to determine which directory FIRMWARE_DIR is set to when the script runs. If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The module will be called iwl4965.ko. config IWL4965_HT bool "Enable 802.11n HT features in iwl4965 driver" depends on EXPERIMENTAL depends on IWL4965 ---help--- This option enables IEEE 802.11n High Throughput features for the iwl4965 driver. config IWL4965_LEDS bool "Enable LEDS features in iwl4965 driver" depends on IWL4965 select IWLWIFI_LEDS ---help--- This option enables LEDS for the iwlwifi drivers config IWL4965_SPECTRUM_MEASUREMENT bool "Enable Spectrum Measurement in iwl4965 driver" depends on IWL4965 ---help--- This option will enable spectrum measurement for the iwl4965 driver. config IWL4965_RUN_TIME_CALIB bool "Enable run time Calibration for 4965 NIC" select IWLWIFI_RUN_TIME_CALIB depends on IWL4965 default y ---help--- This option will enable run time calibration for the iwl4965 driver. These calibrations are Sensitivity and Chain Noise. If unsure, say yes config IWLWIFI_DEBUG bool "Enable full debugging output in iwl4965 driver" depends on IWL4965 ---help--- This option will enable debug tracing output for the iwl4965 driver. This will result in the kernel module being ~100k larger. You can control which debug output is sent to the kernel log by setting the value in /sys/class/net/wlan0/device/debug_level This entry will only exist if this option is enabled. To set a value, simply echo an 8-byte hex value to the same file: % echo 0x43fff > /sys/class/net/wlan0/device/debug_level You can find the list of debug mask values in: drivers/net/wireless/iwlwifi/iwl-4965-debug.h If this is your first time using this driver, you should say Y here as the debug information can assist others in helping you resolve any problems you may encounter. config IWL5000 bool "Intel Wireless WiFi 5000AGN" depends on IWL4965 ---help--- This option enables support for Intel Wireless WiFi Link 5000AGN Family Dependency on 4965 is temporary config IWL5000_RUN_TIME_CALIB bool "Enable run time Calibration for 5000 NIC" select IWLWIFI_RUN_TIME_CALIB depends on IWL5000 default y ---help--- This option will enable run time calibration for the iwl5000 driver. These calibrations are Sensitivity and Chain Noise. If unsure, say yes config IWLWIFI_DEBUGFS bool "Iwlwifi debugfs support" depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS ---help--- Enable creation of debugfs files for the iwlwifi drivers. config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select FW_LOADER select IWLWIFI select MAC80211_LEDS if IWL3945_LEDS select LEDS_CLASS if IWL3945_LEDS ---help--- Select to build the driver supporting the: Intel PRO/Wireless 3945ABG/BG Network Connection This driver uses the kernel's mac80211 subsystem. In order to use this driver, you will need a microcode (uCode) image for it. You can obtain the microcode from: . The microcode is typically installed in /lib/firmware. You can look in the hotplug script /etc/hotplug/firmware.agent to determine which directory FIRMWARE_DIR is set to when the script runs. If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The module will be called iwl3945.ko. config IWL3945_SPECTRUM_MEASUREMENT bool "Enable Spectrum Measurement in iwl3945 drivers" depends on IWL3945 ---help--- This option will enable spectrum measurement for the iwl3945 driver. config IWL3945_LEDS bool "Enable LEDS features in iwl3945 driver" depends on IWL3945 ---help--- This option enables LEDS for the iwl3945 driver. config IWL3945_DEBUG bool "Enable full debugging output in iwl3945 driver" depends on IWL3945 ---help--- This option will enable debug tracing output for the iwl3945 driver. This will result in the kernel module being ~100k larger. You can control which debug output is sent to the kernel log by setting the value in /sys/bus/pci/drivers/${DRIVER}/debug_level This entry will only exist if this option is enabled. To set a value, simply echo an 8-byte hex value to the same file: % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level You can find the list of debug mask values in: drivers/net/wireless/iwlwifi/iwl-3945-debug.h If this is your first time using this driver, you should say Y here as the debug information can assist others in helping you resolve any problems you may encounter.