config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
- depends on NET_ETHERNET && MAC && BROKEN
+ depends on NET_ETHERNET && MAC
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
be called macsonic.
config MACMACE
- bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
- depends on NET_ETHERNET && MAC && EXPERIMENTAL
+ bool "Macintosh (AV) onboard MACE ethernet"
+ depends on NET_ETHERNET && MAC
select CRC32
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
enables offloading for checksums on transmit. If unsure, say Y.
config MIPS_SIM_NET
- tristate "MIPS simulator Network device (EXPERIMENTAL)"
- depends on MIPS_SIM && EXPERIMENTAL
+ tristate "MIPS simulator Network device"
+ depends on NET_ETHERNET && MIPS_SIM
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00)
+ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN)
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91x. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ module, say M here and read <file:Documentation/kbuild/modules.txt>
+ as well as <file:Documentation/networking/net-modules.txt>.
config SMC9194
tristate "SMC 9194 support"
This driver is also available as a module. The module will be
called smc911x. If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>
+ here and read <file:Documentation/kbuild/modules.txt>
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
config NE2000
tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R
+ depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
- depends on NET_PCI && PCI && TOSHIBA_JMR3927
+ depends on NET_PCI && PCI && MIPS
+ select MII
config DGRS
tristate "Digi Intl. RightSwitch SE-X support"
# Gigabit Ethernet
#
-menu "Ethernet (1000 Mbit)"
+menuconfig NETDEV_1000
+ bool "Ethernet (1000 Mbit)"
depends on !UML
+ default y
+
+if NETDEV_1000
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on GIANFAR
config UCC_GETH
- tristate "Freescale QE UCC GETH"
- depends on QUICC_ENGINE && UCC_FAST
+ tristate "Freescale QE Gigabit Ethernet"
+ depends on QUICC_ENGINE
+ select UCC_FAST
help
- This driver supports the Gigabit Ethernet mode of QE UCC.
- QE can be found on MPC836x CPUs.
+ This driver supports the Gigabit Ethernet mode of the QUICC Engine,
+ which is available on some Freescale SOCs.
config UGETH_NAPI
bool "NAPI Support"
bool "Mac address filtering support"
depends on UCC_GETH
-config UGETH_TX_ON_DEMOND
- bool "Transmit on Demond support"
+config UGETH_TX_ON_DEMAND
+ bool "Transmit on Demand support"
depends on UCC_GETH
-config UGETH_HAS_GIGA
- bool
- depends on UCC_GETH && PPC_MPC836x
-
config MV643XX_ETH
tristate "MV-643XX Ethernet support"
- depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
+ depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
select MII
help
This driver supports the gigabit Ethernet on the Marvell MV643XX
To compile this driver as a module, choose M here. The module
will be called atl1.
-endmenu
+endif # NETDEV_1000
#
# 10 Gigabit Ethernet
#
-menu "Ethernet (10000 Mbit)"
+menuconfig NETDEV_10000
+ bool "Ethernet (10000 Mbit)"
depends on !UML
+ default y
+
+if NETDEV_10000
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC64 && PCI
+ select PHYLIB
help
This driver supports the on-chip 1/10Gbit Ethernet controller on
PA Semi's PWRficient line of chips.
-endmenu
+config MLX4_CORE
+ tristate
+ depends on PCI
+ default n
+
+config MLX4_DEBUG
+ bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
+ depends on MLX4_CORE
+ default y
+ ---help---
+ This option causes debugging code to be compiled into the
+ mlx4_core driver. The output can be turned on via the
+ debug_level module parameter (which can also be set after
+ the driver is loaded through sysfs).
+
+endif # NETDEV_10000
source "drivers/net/tokenring/Kconfig"
source "drivers/net/wireless/Kconfig"
+source "drivers/net/usb/Kconfig"
+
source "drivers/net/pcmcia/Kconfig"
source "drivers/net/wan/Kconfig"
config NETPOLL
def_bool NETCONSOLE
-config NETPOLL_RX
- bool "Netpoll support for trapping incoming packets"
- default n
- depends on NETPOLL
-
config NETPOLL_TRAP
bool "Netpoll traffic trapping"
default n
projects / linux-2.6 / blobdiff