config AT32AP700X_WDT
tristate "AT32AP700x watchdog"
- depends on CPU_AT32AP7000
+ depends on CPU_AT32AP700X
help
Watchdog timer embedded into AT32AP700x devices. This will reboot
your system when the timeout is reached.
Most people will say N.
+config GEODE_WDT
+ tristate "AMD Geode CS5535/CS5536 Watchdog"
+ depends on MGEODE_LX
+ help
+ This driver enables a watchdog capability built into the
+ CS5535/CS5536 companion chips for the AMD Geode GX and LX
+ processors. This watchdog watches your kernel to make sure
+ it doesn't freeze, and if it does, it reboots your computer after
+ a certain amount of time.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called geodewdt.
+
config SC520_WDT
tristate "AMD Elan SC520 processor Watchdog"
depends on X86
To compile this driver as a module, choose M here: the
module will be called it8712f_wdt.
+config HP_WATCHDOG
+ tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+ depends on X86
+ help
+ A software monitoring watchdog and NMI sourcing driver. This driver
+ will detect lockups and provide stack trace. Also, when an NMI
+ occurs this driver will make the necessary BIOS calls to log
+ the cause of the NMI. This is a driver that will only load on a
+ HP ProLiant system with a minimum of iLO2 support.
+ To compile this driver as a module, choose M here: the
+ module will be called hpwdt.
+
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on X86
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
- depends on SGI_IP22
+ depends on SGI_HAS_INDYDOG
help
Hardware driver for the Indy's/I2's watchdog. This is a
watchdog timer that will reboot the machine after a 60 second
To compile this driver as a module, choose M here: the
module will be called rm9k_wdt.
+config SIBYTE_WDOG
+ tristate "Sibyte SoC hardware watchdog"
+ depends on CPU_SB1
+ help
+ Watchdog driver for the built in watchdog hardware in Sibyte
+ SoC processors. There are apparently two watchdog timers
+ on such processors; this driver supports only the first one,
+ because currently Linux only supports exporting one watchdog
+ to userspace.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called sb_wdog.
+
config AR7_WDT
tristate "TI AR7 Watchdog Timer"
depends on AR7
help
Hardware driver for the TI AR7 Watchdog Timer.
+config TXX9_WDT
+ tristate "Toshiba TXx9 Watchdog Timer"
+ depends on CPU_TX39XX || CPU_TX49XX
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
# PARISC Architecture
# POWERPC Architecture
machines. The watchdog timeout period is normally one minute but
can be changed with a boot-time parameter.
-# V850 Architecture
-
# XTENSA Architecture
#