ALSA ALSA sound support is enabled.
APIC APIC support is enabled.
APM Advanced Power Management support is enabled.
+ AVR32 AVR32 architecture is enabled.
AX25 Appropriate AX.25 support is enabled.
BLACKFIN Blackfin architecture is enabled.
DRM Direct Rendering Management support is enabled.
configured. Potentially dangerous and should only be
used if you are entirely sure of the consequences.
- chandev= [HW,NET] Generic channel device initialisation
+ ccw_timeout_log [S390]
+ See Documentation/s390/CommonIO for details.
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
Value can be changed at runtime via
/selinux/checkreqprot.
+ cio_ignore= [S390]
+ See Documentation/s390/CommonIO for details.
+
+ cio_msg= [S390]
+ See Documentation/s390/CommonIO for details.
+
clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
[Deprecated]
Forces specified clocksource (if available) to be used
[SPARC64] tick
[X86-64] hpet,tsc
- code_bytes [IA32] How many bytes of object code to print in an
- oops report.
+ clearcpuid=BITNUM [X86]
+ Disable CPUID feature X for the kernel. See
+ include/asm-x86/cpufeature.h for the valid bit numbers.
+ Note the Linux specific bits are not necessarily
+ stable over kernel options, but the vendor specific
+ ones should be.
+ Also note that user programs calling CPUID directly
+ or using the feature without checking anything
+ will still see it. This just prevents it from
+ being used by the kernel or shown in /proc/cpuinfo.
+ Also note the kernel might malfunction if you disable
+ some critical bits.
+
+ code_bytes [IA32/X86_64] How many bytes of object code to print
+ in an oops report.
Range: 0 - 8192
Default: 64
See drivers/char/README.epca and
Documentation/digiepca.txt.
+ disable_mtrr_trim [X86, Intel and AMD only]
+ By default the kernel will trim any uncacheable
+ memory out of your available memory pool based on
+ MTRR settings. This parameter disables that behavior,
+ possibly causing your machine to run very slowly.
+
dmasound= [HW,OSS] Sound subsystem buffers
dscc4.setup= [NET]
gamma= [HW,DRM]
+ gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
+ Format: off | on
+ default: on
+
gdth= [HW,SCSI]
See header of drivers/scsi/gdth.c.
See Documentation/isdn/README.HiSax.
hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
+ hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages.
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
for translation below 32 bit and if not available
then look in the higher range.
+ io_delay= [X86-32,X86-64] I/O delay method
+ 0x80
+ Standard port 0x80 based delay
+ 0xed
+ Alternate port 0xed based delay (needed on some systems)
+ udelay
+ Simple two microseconds delay
+ none
+ No delay
+
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in
C2 power state.
+ libata.dma= [LIBATA] DMA control
+ libata.dma=0 Disable all PATA and SATA DMA
+ libata.dma=1 PATA and SATA Disk DMA only
+ libata.dma=2 ATAPI (CDROM) DMA only
+ libata.dma=4 Compact Flash DMA only
+ Combinations also work, so libata.dma=3 enables DMA
+ for disks and CDROMs, but not CFs.
+
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
Format: <int>
Multi-Function General Purpose Timers on AMD Geode
platforms.
+ mfgptfix [X86-32] Fix MFGPT timers on AMD Geode platforms when
+ the BIOS has incorrectly applied a workaround. TinyBIOS
+ version 0.98 is known to be affected, 0.99 fixes the
+ problem by letting the user disable the workaround.
+
mga= [HW,DRM]
mousedev.tap_time=
of returning the full 64-bit number.
The default is to return 64-bit inode numbers.
+ nmi_debug= [KNL,AVR32] Specify one or more actions to take
+ when a NMI is triggered.
+ Format: [state][,regs][,debounce][,die]
+
nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels
no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
+ noefi [X86-32,X86-64] Disable EFI runtime services support.
+
noexec [IA-64]
noexec [X86-32,X86-64]
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
+ noclflush [BUGS=X86] Don't use the CLFLUSH instruction
+
nohlt [BUGS=ARM]
no-hlt [BUGS=X86-32] Tells the kernel that the hlt
Format: <vendor>:<model>:<flags>
(flags are integer value)
- scsi_logging= [SCSI]
+ scsi_logging_level= [SCSI] a bit mask of logging levels
+ See drivers/scsi/scsi_logging.h for bits. Also
+ settable via sysctl at dev.scsi.logging_level
+ (/proc/sys/dev/scsi/logging_level).
+ There is also a nice 'scsi_logging_level' script in the
+ S390-tools package, available for download at
+ http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
discovered. async scans them in kernel threads,
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
+ vdso32= [X86-32,X86-64]
+ vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
+ vdso32=1: enable 32-bit VDSO (default)
+ vdso32=0: disable 32-bit VDSO mapping
+
vector= [IA-64,SMP]
vector=percpu: enable percpu vector domain
projects / linux-2.6 / blobdiff