Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

[linux-2.6] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c32c87..0d8fac3 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,6 +9,7 @@ config ARM
        bool
        default y
        select RTC_LIB
+       select SYS_SUPPORTS_APM_EMULATION
        help
          The ARM series is a line of low-power-consumption RISC chip designs
          licensed by ARM Ltd and targeted at embedded applications and
@@ -17,14 +18,29 @@ config ARM
          Europe.  There is an ARM Linux project with a web page at
          <http://www.arm.linux.org.uk/>.
 
+config SYS_SUPPORTS_APM_EMULATION
+       bool
+
+config GENERIC_GPIO
+       bool
+       default n
+
 config GENERIC_TIME
        bool
        default n
 
+config GENERIC_CLOCKEVENTS
+       bool
+       default n
+
 config MMU
        bool
        default y
 
+config NO_IOPORT
+       bool
+       default n
+
 config EISA
        bool
        ---help---
@@ -55,6 +71,14 @@ config GENERIC_HARDIRQS
        bool
        default y
 
+config STACKTRACE_SUPPORT
+       bool
+       default y
+
+config LOCKDEP_SUPPORT
+       bool
+       default y
+
 config TRACE_IRQFLAGS_SUPPORT
        bool
        default y
@@ -96,6 +120,10 @@ config GENERIC_BUST_SPINLOCK
 config ARCH_MAY_HAVE_PC_FDC
        bool
 
+config ZONE_DMA
+       bool
+       default y
+
 config GENERIC_ISA_DMA
        bool
 
@@ -146,11 +174,14 @@ config ARCH_VERSATILE
        select ARM_AMBA
        select ARM_VIC
        select ICST307
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
        help
          This enables support for ARM Ltd Versatile board.
 
 config ARCH_AT91
        bool "Atmel AT91"
+       select GENERIC_GPIO
        help
          This enables support for systems based on the Atmel AT91RM9200
          and AT91SAM9xxx processors.
@@ -159,6 +190,7 @@ config ARCH_CLPS7500
        bool "Cirrus CL-PS7500FE"
        select TIMER_ACORN
        select ISA
+       select NO_IOPORT
        help
          Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -177,6 +209,7 @@ config ARCH_CO285
 config ARCH_EBSA110
        bool "EBSA-110"
        select ISA
+       select NO_IOPORT
        help
          This is an evaluation board for the StrongARM processor available
          from Digital. It has limited hardware on-board, including an
@@ -236,6 +269,7 @@ config ARCH_IOP13XX
        depends on MMU
        select PLAT_IOP
        select PCI
+       select ARCH_SUPPORTS_MSI
        help
          Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -243,6 +277,7 @@ config ARCH_IXP4XX
        bool "IXP4xx-based"
        depends on MMU
        select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
        help
          Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -290,6 +325,7 @@ config ARCH_PXA
        bool "PXA2xx-based"
        depends on MMU
        select ARCH_MTD_XIP
+       select GENERIC_GPIO
        select GENERIC_TIME
        help
          Support for Intel's PXA2XX processor line.
@@ -301,6 +337,7 @@ config ARCH_RPC
        select TIMER_ACORN
        select ARCH_MAY_HAVE_PC_FDC
        select ISA_DMA_API
+       select NO_IOPORT
        help
          On the Acorn Risc-PC, Linux can support the internal IDE disk and
          CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -310,11 +347,13 @@ config ARCH_SA1100
        select ISA
        select ARCH_DISCONTIGMEM_ENABLE
        select ARCH_MTD_XIP
+       select GENERIC_GPIO
        help
          Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
        bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+       select GENERIC_GPIO
        help
          Samsung S3C2410X CPU based systems, such as the Simtec Electronics
          BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -339,6 +378,8 @@ config ARCH_LH7A40X
 
 config ARCH_OMAP
        bool "TI OMAP"
+       select GENERIC_GPIO
+       select GENERIC_TIME
        help
          Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -414,7 +455,7 @@ source arch/arm/mm/Kconfig
 
 config IWMMXT
        bool "Enable iWMMXt support"
-       depends CPU_XSCALE || CPU_XSC3
+       depends on CPU_XSCALE || CPU_XSC3
        default y if PXA27x
        help
          Enable support for iWMMXt context switching at run time if
@@ -489,6 +530,8 @@ endmenu
 
 menu "Kernel Features"
 
+source "kernel/time/Kconfig"
+
 config SMP
        bool "Symmetric Multi-Processing (EXPERIMENTAL)"
        depends on EXPERIMENTAL && REALVIEW_MPCORE
@@ -548,6 +591,7 @@ config PREEMPT
 
 config NO_IDLE_HZ
        bool "Dynamic tick timer"
+       depends on !GENERIC_CLOCKEVENTS
        help
          Select this option if you want to disable continuous timer ticks
          and have them programmed to occur as required. This option saves
@@ -645,6 +689,7 @@ config LEDS_TIMER
        bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
                            MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
        depends on LEDS
+       depends on !GENERIC_CLOCKEVENTS
        default y if ARCH_EBSA110
        help
          If you say Y here, one of the system LEDs (the green one on the
@@ -892,31 +937,6 @@ menu "Power management options"
 
 source "kernel/power/Kconfig"
 
-config APM
-       tristate "Advanced Power Management Emulation"
-       ---help---
-         APM is a BIOS specification for saving power using several different
-         techniques. This is mostly useful for battery powered laptops with
-         APM compliant BIOSes. If you say Y here, the system time will be
-         reset after a RESUME operation, the /proc/apm device will provide
-         battery status information, and user-space programs will receive
-         notification of APM "events" (e.g. battery status change).
-
-         In order to use APM, you will need supporting software. For location
-         and more information, read <file:Documentation/pm.txt> and the
-         Battery Powered Linux mini-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         This driver does not spin down disk drives (see the hdparm(8)
-         manpage ("man 8 hdparm") for that), and it doesn't turn off
-         VESA-compliant "green" monitors.
-
-         Generally, if you don't have a battery in your machine, there isn't
-         much point in using this driver and you should say N. If you get
-         random kernel OOPSes or reboots that don't seem to be related to
-         anything, try disabling/enabling this option (or disabling/enabling
-         APM in your BIOS).
-
 endmenu
 
 source "net/Kconfig"