* They may be defined in platform specific headers, if they
* are useful.
*
- * SYM_OPT_HANDLE_DIR_UNKNOWN
- * When this option is set, the SCRIPTS used by the driver
- * are able to handle SCSI transfers with direction not
- * supplied by user.
- * (set for Linux-2.0.X)
- *
* SYM_OPT_HANDLE_DEVICE_QUEUEING
* When this option is set, the driver will use a queue per
* device and handle QUEUE FULL status requeuing internally.
* (set for Linux)
*/
#if 0
-#define SYM_OPT_HANDLE_DIR_UNKNOWN
#define SYM_OPT_HANDLE_DEVICE_QUEUEING
#define SYM_OPT_LIMIT_COMMAND_REORDERING
#endif
struct sym_lcb **lunmp; /* Other LCBs [1..MAX_LUN] */
#endif
- /*
- * Bitmap that tells about LUNs that succeeded at least
- * 1 IO and therefore assumed to be a real device.
- * Avoid useless allocation of the LCB structure.
- */
- u32 lun_map[(SYM_CONF_MAX_LUN+31)/32];
-
- /*
- * Bitmap that tells about LUNs that haven't yet an LCB
- * allocated (not discovered or LCB allocation failed).
- */
- u32 busy0_map[(SYM_CONF_MAX_LUN+31)/32];
-
#ifdef SYM_HAVE_STCB
/*
* O/S specific data structure.
* Other user settable limits and options.
* These limits are read from the NVRAM if present.
*/
- u_char usrflags;
- u_short usrtags;
+ unsigned char usrflags;
+ unsigned char usr_period;
+ unsigned char usr_width;
+ unsigned short usrtags;
struct scsi_target *starget;
};
*/
u32 savep; /* Jump address to saved data pointer */
u32 lastp; /* SCRIPTS address at end of data */
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- u32 wlastp;
-#endif
/*
* Status fields.
SYM_QUEHEAD link_ccbq; /* Link to free/busy CCB queue */
u32 startp; /* Initial data pointer */
u32 goalp; /* Expected last data pointer */
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- u32 wgoalp;
-#endif
int ext_sg; /* Extreme data pointer, used */
int ext_ofs; /* to calculate the residual. */
#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
#define CCB_BA(cp,lbl) cpu_to_scr(cp->ccb_ba + offsetof(struct sym_ccb, lbl))
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
-#define sym_goalp(cp) ((cp->host_flags & HF_DATA_IN) ? cp->goalp : cp->wgoalp)
-#else
-#define sym_goalp(cp) (cp->goalp)
-#endif
-
typedef struct device *m_pool_ident_t;
/*
* Physical bus addresses of the chip.
*/
u32 mmio_ba; /* MMIO 32 bit BUS address */
- int mmio_ws; /* MMIO Window size */
-
u32 ram_ba; /* RAM 32 bit BUS address */
- int ram_ws; /* RAM window size */
/*
* SCRIPTS virtual and physical bus addresses.
struct sym_fwb_ba fwb_bas; /* Useful SCRIPTB bus addresses */
struct sym_fwz_ba fwz_bas; /* Useful SCRIPTZ bus addresses */
void (*fw_setup)(struct sym_hcb *np, struct sym_fw *fw);
- void (*fw_patch)(struct sym_hcb *np);
+ void (*fw_patch)(struct Scsi_Host *);
char *fw_name;
/*
* General controller parameters and configuration.
*/
- u_short device_id; /* PCI device id */
- u_char revision_id; /* PCI device revision id */
u_int features; /* Chip features map */
u_char myaddr; /* SCSI id of the adapter */
u_char maxburst; /* log base 2 of dwords burst */
#endif
};
+#if SYM_CONF_DMA_ADDRESSING_MODE == 0
+#define use_dac(np) 0
+#define set_dac(np) do { } while (0)
+#else
+#define use_dac(np) (np)->use_dac
+#define set_dac(np) (np)->use_dac = 1
+#endif
+
#define HCB_BA(np, lbl) (np->hcb_ba + offsetof(struct sym_hcb, lbl))
void sym_print_xerr(struct scsi_cmnd *cmd, int x_status);
int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int);
struct sym_chip *sym_lookup_chip_table(u_short device_id, u_char revision);
-void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp);
#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn);
+#else
+void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp);
#endif
-void sym_start_up(struct sym_hcb *np, int reason);
-void sym_interrupt(struct sym_hcb *np);
+void sym_start_up(struct Scsi_Host *, int reason);
+irqreturn_t sym_interrupt(struct Scsi_Host *);
int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int task);
struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order);
void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp);
*/
#if SYM_CONF_DMA_ADDRESSING_MODE == 0
+#define DMA_DAC_MASK DMA_32BIT_MASK
#define sym_build_sge(np, data, badd, len) \
do { \
(data)->addr = cpu_to_scr(badd); \
(data)->size = cpu_to_scr(len); \
} while (0)
#elif SYM_CONF_DMA_ADDRESSING_MODE == 1
+#define DMA_DAC_MASK DMA_40BIT_MASK
#define sym_build_sge(np, data, badd, len) \
do { \
(data)->addr = cpu_to_scr(badd); \
(data)->size = cpu_to_scr((((badd) >> 8) & 0xff000000) + len); \
} while (0)
#elif SYM_CONF_DMA_ADDRESSING_MODE == 2
+#define DMA_DAC_MASK DMA_64BIT_MASK
int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s);
static __inline void
sym_build_sge(struct sym_hcb *np, struct sym_tblmove *data, u64 badd, int len)
#error "Unsupported DMA addressing mode"
#endif
-/*
- * Set up data pointers used by SCRIPTS.
- * Called from O/S specific code.
- */
-static inline void sym_setup_data_pointers(struct sym_hcb *np,
- struct sym_ccb *cp, int dir)
-{
- u32 lastp, goalp;
-
- /*
- * No segments means no data.
- */
- if (!cp->segments)
- dir = DMA_NONE;
-
- /*
- * Set the data pointer.
- */
- switch(dir) {
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- case DMA_BIDIRECTIONAL:
-#endif
- case DMA_TO_DEVICE:
- goalp = SCRIPTA_BA(np, data_out2) + 8;
- lastp = goalp - 8 - (cp->segments * (2*4));
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- cp->wgoalp = cpu_to_scr(goalp);
- if (dir != DMA_BIDIRECTIONAL)
- break;
- cp->phys.head.wlastp = cpu_to_scr(lastp);
- /* fall through */
-#else
- break;
-#endif
- case DMA_FROM_DEVICE:
- cp->host_flags |= HF_DATA_IN;
- goalp = SCRIPTA_BA(np, data_in2) + 8;
- lastp = goalp - 8 - (cp->segments * (2*4));
- break;
- case DMA_NONE:
- default:
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- cp->host_flags |= HF_DATA_IN;
-#endif
- lastp = goalp = SCRIPTB_BA(np, no_data);
- break;
- }
-
- /*
- * Set all pointers values needed by SCRIPTS.
- */
- cp->phys.head.lastp = cpu_to_scr(lastp);
- cp->phys.head.savep = cpu_to_scr(lastp);
- cp->startp = cp->phys.head.savep;
- cp->goalp = cpu_to_scr(goalp);
-
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- /*
- * If direction is unknown, start at data_io.
- */
- if (dir == DMA_BIDIRECTIONAL)
- cp->phys.head.savep = cpu_to_scr(SCRIPTB_BA(np, data_io));
-#endif
-}
-
/*
* MEMORY ALLOCATOR.
*/
projects / linux-2.6 / blobdiff