static int netcard_probe1(struct net_device *dev, int ioaddr);
static int net_open(struct net_device *dev);
static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t net_interrupt(int irq, void *dev_id);
static void net_rx(struct net_device *dev);
static int net_close(struct net_device *dev);
static struct net_device_stats *net_get_stats(struct net_device *dev);
int base_addr = dev->base_addr;
int irq = dev->irq;
- SET_MODULE_OWNER(dev);
-
if (base_addr > 0x1ff) /* Check a single specified location. */
return netcard_probe1(dev, base_addr);
else if (base_addr != 0) /* Don't probe at all. */
return -ENODEV;
}
-
+
static void cleanup_card(struct net_device *dev)
{
#ifdef jumpered_dma
static unsigned version_printed;
int i;
int err = -ENODEV;
+ DECLARE_MAC_BUF(mac);
/* Grab the region so that no one else tries to probe our ioports. */
if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
return -EBUSY;
/*
- * For ethernet adaptors the first three octets of the station address
+ * For ethernet adaptors the first three octets of the station address
* contains the manufacturer's unique code. That might be a good probe
* method. Ideally you would add additional checks.
- */
+ */
if (inb(ioaddr + 0) != SA_ADDR0
|| inb(ioaddr + 1) != SA_ADDR1
|| inb(ioaddr + 2) != SA_ADDR2)
/* Retrieve and print the ethernet address. */
for (i = 0; i < 6; i++)
- printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
+ dev->dev_addr[i] = inb(ioaddr + i);
+
+ printk("%s", print_mac(mac, dev->dev_addr));
err = -EAGAIN;
#ifdef jumpered_interrupts
if (i <= 0) {
printk("DMA probe failed.\n");
goto out1;
- }
+ }
if (request_dma(dev->dma, cardname)) {
printk("probed DMA %d allocation failed.\n", dev->dma);
goto out1;
dev->set_multicast_list = &set_multicast_list;
dev->tx_timeout = &net_tx_timeout;
- dev->watchdog_timeo = MY_TX_TIMEOUT;
+ dev->watchdog_timeo = MY_TX_TIMEOUT;
err = register_netdev(dev);
if (err)
* The typical workload of the driver:
* Handle the network interface interrupts.
*/
-static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+static irqreturn_t net_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct net_local *np;
do {
int status = inw(ioaddr);
int pkt_len = inw(ioaddr);
-
+
if (pkt_len == 0) /* Read all the frames? */
break; /* Done for now */
struct sk_buff *skb;
lp->stats.rx_bytes+=pkt_len;
-
+
skb = dev_alloc_skb(pkt_len);
if (skb == NULL) {
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
outw(MULTICAST, ioaddr);
}
- else
+ else
outw(0, ioaddr);
}