Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

[linux-2.6] / arch / mips / Kconfig

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 5fe195a..58e9788 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -144,6 +144,7 @@ config BASLER_EXCITE
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_KGDB
        help
          The eXcite is a smart camera platform manufactured by
          Basler Vision Technologies AG
@@ -210,6 +211,7 @@ config MIPS_EV64120
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_KGDB
        help
          This is an evaluation board based on the Galileo GT-64120
          single-chip system controller that contains a MIPS R5000 compatible
@@ -272,6 +274,7 @@ config MIPS_ATLAS
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
+       select SYS_SUPPORTS_SMARTMIPS
        select GENERIC_HARDIRQS_NO__DO_IRQ
        help
          This enables support for the MIPS Technologies Atlas evaluation
@@ -303,6 +306,7 @@ config MIPS_MALTA
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_SUPPORTS_MULTITHREADING
+       select SYS_SUPPORTS_SMARTMIPS
        help
          This enables support for the MIPS Technologies Malta evaluation
          board.
@@ -320,6 +324,7 @@ config MIPS_SEAD
        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
+       select SYS_SUPPORTS_SMARTMIPS
        help
          This enables support for the MIPS Technologies SEAD evaluation
          board.
@@ -374,6 +379,7 @@ config MOMENCO_JAGUAR_ATX
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_KGDB
        help
          The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
          Momentum Computer <http://www.momenco.com/>.
@@ -391,6 +397,7 @@ config MOMENCO_OCELOT
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_KGDB
        help
          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
          Momentum Computer <http://www.momenco.com/>.
@@ -480,6 +487,8 @@ config DDB5477
        select SYS_HAS_CPU_R5432
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+       select SYS_SUPPORTS_KGDB
+       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_LITTLE_ENDIAN
        help
          This enables support for the R5432-based NEC DDB Vrc-5477,
@@ -508,6 +517,7 @@ config PMC_YOSEMITE
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_HIGHMEM
+       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_SMP
        help
          Yosemite is an evaluation board for the RM9000x2 processor
@@ -584,6 +594,7 @@ config SGI_IP27
        select SYS_HAS_CPU_R10000
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_NUMA
        select SYS_SUPPORTS_SMP
        select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -598,8 +609,6 @@ config SGI_IP32
        select ARC
        select ARC32
        select BOOT_ELF32
-       select OWN_DMA
-       select DMA_IP32
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select R5000_CPU_SCACHE
@@ -635,6 +644,7 @@ config SIBYTE_SWARM
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_HIGHMEM
+       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SENTOSA
@@ -728,15 +738,16 @@ config SNI_RM
        select BOOT_ELF32
        select DMA_NONCOHERENT
        select GENERIC_ISA_DMA
-       select HAVE_STD_PC_SERIAL_PORT
        select HW_HAS_EISA
        select HW_HAS_PCI
+       select IRQ_CPU
        select I8253
        select I8259
        select ISA
        select SWAP_IO_SPACE if CPU_BIG_ENDIAN
        select SYS_HAS_CPU_R4X00
        select SYS_HAS_CPU_R5000
+       select SYS_HAS_CPU_R10000
        select R5000_CPU_SCACHE
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
@@ -774,6 +785,7 @@ config TOSHIBA_RBTX4927
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_KGDB
        select TOSHIBA_BOARDS
        select GENERIC_HARDIRQS_NO__DO_IRQ
        help
@@ -794,6 +806,7 @@ config TOSHIBA_RBTX4938
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_KGDB
        select TOSHIBA_BOARDS
        select GENERIC_HARDIRQS_NO__DO_IRQ
        help
@@ -883,9 +896,6 @@ config DMA_NONCOHERENT
 config DMA_NEED_PCI_MAP_STATE
        bool
 
-config OWN_DMA
-       bool
-
 config EARLY_PRINTK
        bool
 
@@ -963,6 +973,7 @@ config IRQ_MV64340
 
 config DDB5XXX_COMMON
        bool
+       select SYS_SUPPORTS_KGDB
 
 config MIPS_BOARDS_GEN
        bool
@@ -1011,6 +1022,7 @@ config SOC_AU1X00
        select SYS_HAS_CPU_MIPS32_R1
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_APM_EMULATION
+       select SYS_SUPPORTS_KGDB
 
 config PNX8550
        bool
@@ -1023,6 +1035,7 @@ config SOC_PNX8550
        select SYS_HAS_CPU_MIPS32_R1
        select SYS_SUPPORTS_32BIT_KERNEL
        select GENERIC_HARDIRQS_NO__DO_IRQ
+       select SYS_SUPPORTS_KGDB
 
 config SWAP_IO_SPACE
        bool
@@ -1071,7 +1084,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
        int
-       default "4" if MACH_DECSTATION
+       default "4" if MACH_DECSTATION || SNI_RM
        default "7" if SGI_IP27
        default "5"
 
@@ -1631,6 +1644,18 @@ config 64BIT_PHYS_ADDR
 config CPU_HAS_LLSC
        bool
 
+config CPU_HAS_SMARTMIPS
+       depends on SYS_SUPPORTS_SMARTMIPS
+       bool "Support for the SmartMIPS ASE"
+       help
+         SmartMIPS is a extension of the MIPS32 architecture aimed at
+         increased security at both hardware and software level for
+         smartcards.  Enabling this option will allow proper use of the
+         SmartMIPS instructions by Linux applications.  However a kernel with
+         this option will not work on a MIPS core without SmartMIPS core.  If
+         you don't know you probably don't have SmartMIPS and should say N
+         here.
+
 config CPU_HAS_WB
        bool
 
@@ -1694,6 +1719,9 @@ config CPU_SUPPORTS_HIGHMEM
 config SYS_SUPPORTS_HIGHMEM
        bool
 
+config SYS_SUPPORTS_SMARTMIPS
+       bool
+
 config ARCH_FLATMEM_ENABLE
        def_bool y
        depends on !NUMA