[PATCH] struct path: convert freevxfs

[linux-2.6] / arch / m68knommu / Kconfig

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 6d920d4..aa70dde 100644 (file)
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -173,7 +173,7 @@ config CLOCK_DIV
          On many SoC style CPUs the master CPU clock is also used to drive 
          on-chip peripherals. The clock that is distributed to these
          peripherals is sometimes a fixed ratio of the master clock
-         frequency. If so then set this to the divider ration of the
+         frequency. If so then set this to the divider ratio of the
          master clock to the peripheral clock. If not sure then select 1.
 
 config OLDMASK
@@ -192,7 +192,7 @@ config PILOT3
          Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
 
 config XCOPILOT_BUGS
-       bool "  (X)Copilot support"
+       bool "(X)Copilot support"
        depends on PILOT3
        help
          Support the bugs of Xcopilot.
@@ -216,20 +216,20 @@ config DRAGEN2
          Support for the DragenEngine II board.
 
 config DIRECT_IO_ACCESS
-       bool "  Allow user to access IO directly"
+       bool "Allow user to access IO directly"
        depends on (UCSIMM || UCDIMM || DRAGEN2)
        help
          Disable the CPU internal registers protection in user mode,
           to allow a user application to read/write them.
 
 config INIT_LCD
-       bool "  Initialize LCD"
+       bool "Initialize LCD"
        depends on (UCSIMM || UCDIMM || DRAGEN2)
        help
          Initialize the LCD controller of the 68x328 processor.
 
 config MEMORY_RESERVE
-       int "  Memory reservation (MiB)"
+       int "Memory reservation (MiB)"
        depends on (UCSIMM || UCDIMM)
        help
          Reserve certain memory regions on 68x328 based boards.
@@ -409,7 +409,7 @@ config MOD5272
          Support for the Netburner MOD-5272 board.
 
 config ROMFS_FROM_ROM
-       bool "  ROMFS image not RAM resident"
+       bool "ROMFS image not RAM resident"
        depends on (NETtel || SNAPGEAR)
        help
          The ROMfs filesystem will stay resident in the FLASH/ROM, not be
@@ -565,7 +565,7 @@ config ROMVEC
        depends on ROM
        help
          This is almost always the same as the base of the ROM. Since on all
-         68000 type varients the vectors are at the base of the boot device
+         68000 type variants the vectors are at the base of the boot device
          on system startup.
 
 config ROMVECSIZE
@@ -574,7 +574,7 @@ config ROMVECSIZE
        depends on ROM
        help
          Define the size of the vector region in ROM. For most 68000
-         varients this would be 0x400 bytes in size. Set to 0 if you do
+         variants this would be 0x400 bytes in size. Set to 0 if you do
          not want a vector region at the start of the ROM.
 
 config ROMSTART