#define SCSI_TIMEOUT (2*HZ)
/*
- * Prefix values for the SCSI id's (stored in driverfs name field)
+ * Prefix values for the SCSI id's (stored in sysfs name field)
*/
#define SCSI_UID_SER_NUM 'S'
#define SCSI_UID_UNKNOWN 'Z'
return 0;
}
-#ifdef MODULE
/* Only exported for the benefit of scsi_wait_scan */
EXPORT_SYMBOL_GPL(scsi_complete_async_scans);
+
+#ifndef MODULE
+/*
+ * For async scanning we need to wait for all the scans to complete before
+ * trying to mount the root fs. Otherwise non-modular drivers may not be ready
+ * yet.
+ */
+late_initcall(scsi_complete_async_scans);
#endif
/**
INIT_LIST_HEAD(&starget->siblings);
INIT_LIST_HEAD(&starget->devices);
starget->state = STARGET_RUNNING;
+ starget->scsi_level = SCSI_2;
retry:
spin_lock_irqsave(shost->host_lock, flags);
* short INQUIRY), an abort here prevents any further use of the
* device, including spin up.
*
+ * On the whole, the best approach seems to be to assume the first
+ * 36 bytes are valid no matter what the device says. That's
+ * better than copying < 36 bytes to the inquiry-result buffer
+ * and displaying garbage for the Vendor, Product, or Revision
+ * strings.
+ */
+ if (sdev->inquiry_len < 36) {
+ printk(KERN_INFO "scsi scan: INQUIRY result too short (%d),"
+ " using 36\n", sdev->inquiry_len);
+ sdev->inquiry_len = 36;
+ }
+
+ /*
* Related to the above issue:
*
* XXX Devices (disk or all?) should be sent a TEST UNIT READY,
/**
* scsi_add_lun - allocate and fully initialze a scsi_device
- * @sdevscan: holds information to be stored in the new scsi_device
- * @sdevnew: store the address of the newly allocated scsi_device
+ * @sdev: holds information to be stored in the new scsi_device
* @inq_result: holds the result of a previous INQUIRY to the LUN
* @bflags: black/white list flag
+ * @async: 1 if this device is being scanned asynchronously
*
* Description:
- * Allocate and initialize a scsi_device matching sdevscan. Optionally
- * set fields based on values in *@bflags. If @sdevnew is not
- * NULL, store the address of the new scsi_device in *@sdevnew (needed
- * when scanning a particular LUN).
+ * Initialize the scsi_device @sdev. Optionally set fields based
+ * on values in *@bflags.
*
* Return:
* SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
sdev->rev = (char *) (sdev->inquiry + 32);
if (*bflags & BLIST_ISROM) {
- /*
- * It would be better to modify sdev->type, and set
- * sdev->removable; this can now be done since
- * print_inquiry has gone away.
- */
- inq_result[0] = TYPE_ROM;
- inq_result[1] |= 0x80; /* removable */
- } else if (*bflags & BLIST_NO_ULD_ATTACH)
- sdev->no_uld_attach = 1;
+ sdev->type = TYPE_ROM;
+ sdev->removable = 1;
+ } else {
+ sdev->type = (inq_result[0] & 0x1f);
+ sdev->removable = (inq_result[1] & 0x80) >> 7;
+ }
- switch (sdev->type = (inq_result[0] & 0x1f)) {
+ switch (sdev->type) {
case TYPE_RBC:
- /* RBC devices can return SCSI-3 compliance and yet
- * still not support REPORT LUNS, so make them act as
- * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
- * specifically set */
- if ((*bflags & BLIST_REPORTLUN2) == 0)
- *bflags |= BLIST_NOREPORTLUN;
- /* fall through */
case TYPE_TAPE:
case TYPE_DISK:
case TYPE_PRINTER:
sdev->writeable = 1;
break;
case TYPE_ROM:
- /* MMC devices can return SCSI-3 compliance and yet
- * still not support REPORT LUNS, so make them act as
- * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
- * specifically set */
- if ((*bflags & BLIST_REPORTLUN2) == 0)
- *bflags |= BLIST_NOREPORTLUN;
- /* fall through */
case TYPE_WORM:
sdev->writeable = 0;
break;
printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type);
}
+ if (sdev->type == TYPE_RBC || sdev->type == TYPE_ROM) {
+ /* RBC and MMC devices can return SCSI-3 compliance and yet
+ * still not support REPORT LUNS, so make them act as
+ * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+ * specifically set */
+ if ((*bflags & BLIST_REPORTLUN2) == 0)
+ *bflags |= BLIST_NOREPORTLUN;
+ }
+
/*
* For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
* spec says: The device server is capable of supporting the
*/
sdev->inq_periph_qual = (inq_result[0] >> 5) & 7;
- sdev->removable = (0x80 & inq_result[1]) >> 7;
sdev->lockable = sdev->removable;
sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2);
- if (sdev->scsi_level >= SCSI_3 || (sdev->inquiry_len > 56 &&
- inq_result[56] & 0x04))
+ if (sdev->scsi_level >= SCSI_3 ||
+ (sdev->inquiry_len > 56 && inq_result[56] & 0x04))
sdev->ppr = 1;
if (inq_result[7] & 0x60)
sdev->wdtr = 1;
sdev->inq_periph_qual, inq_result[2] & 0x07,
(inq_result[3] & 0x0f) == 1 ? " CCS" : "");
- /*
- * End sysfs code.
- */
-
if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) &&
!(*bflags & BLIST_NOTQ))
sdev->tagged_supported = 1;
+
/*
* Some devices (Texel CD ROM drives) have handshaking problems
* when used with the Seagate controllers. borken is initialized
if ((*bflags & BLIST_BORKEN) == 0)
sdev->borken = 0;
+ if (*bflags & BLIST_NO_ULD_ATTACH)
+ sdev->no_uld_attach = 1;
+
/*
* Apparently some really broken devices (contrary to the SCSI
* standards) need to be selected without asserting ATN
if (*bflags & BLIST_SINGLELUN)
sdev->single_lun = 1;
-
sdev->use_10_for_rw = 1;
if (*bflags & BLIST_MS_SKIP_PAGE_08)
* Given a struct scsi_lun of: 0a 04 0b 03 00 00 00 00, this function returns
* the integer: 0x0b030a04
**/
-static int scsilun_to_int(struct scsi_lun *scsilun)
+int scsilun_to_int(struct scsi_lun *scsilun)
{
int i;
unsigned int lun;
scsilun->scsi_lun[i + 1]) << (i * 8));
return lun;
}
+EXPORT_SYMBOL(scsilun_to_int);
/**
* int_to_scsilun: reverts an int into a scsi_lun