select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
+ select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FTRACE if (!XIP_KERNEL)
select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+ select HAVE_GENERIC_DMA_COHERENT
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
config ZONE_DMA
bool
- default y
config GENERIC_ISA_DMA
bool
config OPROFILE_ARM11_CORE
bool
+config OPROFILE_ARMV7
+ def_bool y
+ depends on CPU_V7 && !SMP
+ bool
+
endif
config VECTORS_BASE
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
select ARM_AMBA
+ select HAVE_CLK
help
This enables support for systems based on the Agilent AAEC-2000
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
+ select HAVE_CLK
select ICST525
help
Support for ARM's Integrator platform.
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
+ select HAVE_CLK
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
bool "ARM Ltd. Versatile family"
select ARM_AMBA
select ARM_VIC
+ select HAVE_CLK
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
+ select HAVE_CLK
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
select TIMER_ACORN
select ISA
select NO_IOPORT
+ select ARCH_SPARSEMEM_ENABLE
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
select ARM_AMBA
select ARM_VIC
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select HAVE_CLK
+ select ARCH_REQUIRE_GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
select PLAT_IOP
select PCI
select ARCH_SUPPORTS_MSI
+ select VMSPLIT_1G
help
Support for Intel's IOP13XX (XScale) family of processors.
select PLAT_IOP
select PCI
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
select PLAT_IOP
select PCI
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's IOP33X (XScale) family of processors.
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ZONE_DMA if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
help
Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
System.
select GENERIC_CLOCKEVENTS
select ARCH_MTD_XIP
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
Support for Freescale MXC/iMX-based family of processors
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
+ select HAVE_CLK
help
This enables support for Philips PNX4008 mobile platform.
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select HAVE_CLK
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select HAVE_PATA_PLATFORM
select ISA_DMA_API
select NO_IOPORT
+ select ARCH_SPARSEMEM_ENABLE
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
config ARCH_SA1100
bool "SA1100-based"
select ISA
- select ARCH_DISCONTIGMEM_ENABLE
select ARCH_SPARSEMEM_ENABLE
- select ARCH_SELECT_MEMORY_MODEL
select ARCH_MTD_XIP
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
select TICK_ONESHOT
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
+ select HAVE_CLK
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
bool "Shark"
select ISA
select ISA_DMA
+ select ZONE_DMA
select PCI
help
Support for the StrongARM based Digital DNARD machine, also known
config ARCH_LH7A40X
bool "Sharp LH7A40X"
+ select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
+ select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
+ select HAVE_CLK
+ select ZONE_DMA
help
Support for TI's DaVinci platform.
config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select HAVE_CLK
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
If you don't know what to do here, say N.
+choice
+ prompt "Memory split"
+ default VMSPLIT_3G
+ help
+ Select the desired split between kernel and user memory.
+
+ If you are not absolutely sure what you are doing, leave this
+ option alone!
+
+ config VMSPLIT_3G
+ bool "3G/1G user/kernel split"
+ config VMSPLIT_2G
+ bool "2G/2G user/kernel split"
+ config VMSPLIT_1G
+ bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+ hex
+ default 0x40000000 if VMSPLIT_1G
+ default 0x80000000 if VMSPLIT_2G
+ default 0xC0000000
+
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
UNPREDICTABLE (in fact it can be predicted that it won't work
at all). If in doubt say Y.
+config ARCH_FLATMEM_HAS_HOLES
+ bool
+ default y
+ depends on FLATMEM
+
+# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
bool
- default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
- help
- Say Y to support efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
config ARCH_SPARSEMEM_ENABLE
bool
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool ARCH_SPARSEMEM_ENABLE
+
config ARCH_SELECT_MEMORY_MODEL
- bool
+ def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
config NODES_SHIFT
int
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+menu "CPU Power Management"
-menu "CPU Frequency scaling"
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
default y
select CPU_FREQ_DEFAULT_GOV_USERSPACE
-endmenu
-
endif
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
menu "Floating point emulation"
comment "At least one emulation must be selected"
source "drivers/hwmon/Kconfig"
+source "drivers/thermal/Kconfig"
+
source "drivers/watchdog/Kconfig"
source "drivers/ssb/Kconfig"
source "drivers/mmc/Kconfig"
+source "drivers/memstick/Kconfig"
+
+source "drivers/accessibility/Kconfig"
+
source "drivers/leds/Kconfig"
source "drivers/rtc/Kconfig"
source "drivers/dca/Kconfig"
+source "drivers/auxdisplay/Kconfig"
+
+source "drivers/regulator/Kconfig"
+
source "drivers/uio/Kconfig"
endmenu
projects / linux-2.6 / blobdiff