#
# Prompt user for primary drivers.
-config SOUND_BT878
- tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI
- ---help---
- Audio DMA support for bt878 based grabber boards. As you might have
- already noticed, bt878 is listed with two functions in /proc/pci.
- Function 0 does the video stuff (bt848 compatible), function 1 does
- the same for audio data. This is a driver for the audio part of
- the chip. If you say 'Y' here you get a oss-compatible dsp device
- where you can record from. If you want just watch TV you probably
- don't need this driver as most TV cards handle sound with a short
- cable from the TV card to your sound card's line-in.
-
- To compile this driver as a module, choose M here: the module will
- be called btaudio.
-
-config SOUND_EMU10K1
- tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME && PCI
- ---help---
- Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
- such as the Creative SBLive!, SB PCI512 or Emu-APS.
-
- For more information on this driver and the degree of support for
- the different card models please check:
-
- <http://sourceforge.net/projects/emu10k1/>
-
- It is now possible to load dsp microcode patches into the EMU10K1
- chip. These patches are used to implement real time sound
- processing effects which include for example: signal routing,
- bass/treble control, AC3 passthrough, ...
- Userspace tools to create new patches and load/unload them can be
- found in the emu-tools package at the above URL.
-
-config MIDI_EMU10K1
- bool "Creative SBLive! MIDI (EXPERIMENTAL)"
- depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
- help
- Say Y if you want to be able to use the OSS /dev/sequencer
- interface. This code is still experimental.
-
-config SOUND_FUSION
- tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME && PCI
- help
- This module drives the Crystal SoundFusion devices (CS4280/46xx
- series) when wired as native sound drivers with AC97 codecs. If
- this driver does not work try the CS4232 driver.
-
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
-config SOUND_ES1371
- tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME && PCI
- help
- Say Y or M if you have a PCI sound card utilizing the Ensoniq
- ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
- your sound card uses an ES1371 without removing your computer's
- cover, use lspci -n and look for the PCI ID 1274:1371. Since
- Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
- models are either ES1370 or ES1371 based. This driver differs
- slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/es1371>.
-
-config SOUND_ICH
- tristate "Intel ICH (i8xx) audio support"
- depends on SOUND_PRIME && PCI
- help
- Support for integral audio in Intel's I/O Controller Hub (ICH)
- chipset, as used on the 810/820/840 motherboards.
-
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
use its on-board A2 audio system.
-config SOUND_IT8172
- tristate "IT8172G Sound"
- depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR)
-
-config SOUND_VRC5477
- tristate "NEC Vrc5477 AC97 sound"
- depends on SOUND_PRIME && DDB5477
- help
- Say Y here to enable sound support for the NEC Vrc5477 chip, an
- integrated, multi-function controller chip for MIPS CPUs. Works
- with the AC97 codec.
-
config SOUND_AU1550_AC97
tristate "Au1550/Au1200 AC97 Sound"
select SND_AC97_CODEC
This driver differs slightly from OSS/Free, so PLEASE READ the
- comments at the top of <file:drivers/sound/trident.c>.
+ comments at the top of <file:sound/oss/trident.c>.
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
and Pinnacle). Larger values reduce the chance of data overruns at
the expense of overall latency. If unsure, use the default.
-config SOUND_VIA82CXXX
- tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI
- help
- Say Y here to include support for the audio codec found on VIA
- 82Cxxx-based chips. Typically these are built into a motherboard.
-
- DO NOT select Sound Blaster or Adlib with this driver, unless
- you have a Sound Blaster or Adlib card in addition to your VIA
- audio chip.
-
-config MIDI_VIA82CXXX
- bool "VIA 82C686 MIDI"
- depends on SOUND_VIA82CXXX && ISA_DMA_API
- help
- Answer Y to use the MIDI interface of the Via686. You may need to
- enable this in the BIOS before it will work. This is for connection
- to external MIDI hardware, and is not required for software playback
- of MIDI files.
-
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME && ISA_DMA_API
+ depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
Say Y unless you have 16MB or more RAM or a PCI sound card.
-config SOUND_AD1816
- tristate "AD1816(A) based cards (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS
- help
- Say M here if you have a sound card based on the Analog Devices
- AD1816(A) chip.
-
- If you compile the driver into the kernel, you have to add
- "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_AD1889
- tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS && PCI
- help
- Say M here if you have a sound card based on the Analog Devices
- AD1889 chip.
-
-config SOUND_ADLIB
- tristate "Adlib Cards"
- depends on SOUND_OSS
- help
- Includes ASB 64 4D. Information on programming AdLib cards is
- available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
-
-config SOUND_ACI_MIXER
- tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
- depends on SOUND_OSS
- ---help---
- ACI (Audio Command Interface) is a protocol used to communicate with
- the microcontroller on some sound cards produced by miro and
- Cardinal Technologies. The main function of the ACI is to control
- the mixer and to get a product identification.
-
- This VoxWare ACI driver currently supports the ACI functions on the
- miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
- also controls the radio tuner. This is supported in the video4linux
- miropcm20 driver (say M or Y here and go back to "Multimedia
- devices" -> "Radio Adapters").
-
- This driver is also available as a module and will be called aci.
-
-config SOUND_CS4232
- tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS
- help
- Say Y here if you have a card based on the Crystal CS4232 chip set,
- which uses its own Plug and Play protocol.
-
- If you compile the driver into the kernel, you have to add
- "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
- See <file:Documentation/sound/oss/CS4232> for more information on
- configuring this card.
-
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
depends on SOUND_OSS
+ depends on VIRT_TO_BUS
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
If you compile the driver into the kernel, you have to add
"mpu401=<io>,<irq>" to the kernel command line.
-config SOUND_NM256
- tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS
- help
- Say M here to include audio support for the NeoMagic 256AV/256ZX
- chipsets. These are the audio chipsets found in the Sony
- Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
- laptops. It includes support for an AC97-compatible mixer and an
- apparently proprietary sound engine.
-
- See <file:Documentation/sound/oss/NM256> for further information.
-
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
command line.
config PSS_MIXER
- bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
+ bool "Enable PSS mixer (Beethoven ADSP-16 and other compatible)"
depends on SOUND_PSS
help
Answer Y for Beethoven ADSP-16. You may try to say Y also for other
If unsure, say Y.
-config SOUND_OPL3SA2
- tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
- depends on SOUND_OSS
- help
- Say Y or M if you have a card based on one of these Yamaha sound
- chipsets or the "SAx", which is actually a SA3. Read
- <file:Documentation/sound/oss/OPL3-SA2> for more information on
- configuring these cards.
-
- If you compile the driver into the kernel and do not also
- configure in the optional ISA PnP support, you will have to add
- "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
- command line.
-
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
questions.
Read the <file:Documentation/sound/oss/README.OSS> file and the head of
- <file:drivers/sound/aedsp16.c> as well as
+ <file:sound/oss/aedsp16.c> as well as
<file:Documentation/sound/oss/AudioExcelDSP16> to get more information
about this driver and its configuration.
endchoice
-config AEDSP16_MPU401
- bool "Audio Excel DSP 16 (MPU401 emulation)"
- depends on SOUND_AEDSP16 && SOUND_MPU401
- help
- Answer Y if you want your audio card to emulate the MPU-401 midi
- interface. You should then also say Y to "MPU-401 support".
-
- Note that the I/O base for MPU-401 support of aedsp16 is the same
- you have selected for "MPU-401 support". If you are using this
- driver as a module you have to specify the MPU I/O base address with
- the parameter 'mpu_base=0xNNN'.
-
config SOUND_VIDC
tristate "VIDC 16-bit sound"
depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
Say Y here to include support for the Rockwell WaveArtist sound
system. This driver is mainly for the NetWinder.
-config SOUND_TVMIXER
- tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME && I2C && VIDEO_V4L1
- help
- Support for audio mixer facilities on the BT848 TV frame-grabber
- card.
-
config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB