bool
default y
+config GENERIC_HWEIGHT
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
config PPC
bool
default y
select 83xx
select PPC_FPU
+config PPC_85xx
+ bool "Freescale 85xx"
+ select E500
+ select FSL_SOC
+ select 85xx
+
+config PPC_86xx
+ bool "Freescale 86xx"
+ select 6xx
+ select FSL_SOC
+ select PPC_FPU
+ select ALTIVEC
+ help
+ The Freescale E600 SoCs have 74xx cores.
+
config 40x
bool "AMCC 40x"
config E200
bool "Freescale e200"
-config E500
- bool "Freescale e500"
endchoice
config POWER4_ONLY
config 83xx
bool
+# this is temp to handle compat with arch=ppc
+config 85xx
+ bool
+
+config E500
+ bool
+
config PPC_FPU
bool
default y if PPC64
config SPE
bool "SPE Support"
depends on E200 || E500
+ default y
---help---
This option enables kernel support for the Signal Processing
Extensions (SPE) to the PowerPC processor. The kernel currently
def_bool y
depends on PPC_STD_MMU && PPC32
+config VIRT_CPU_ACCOUNTING
+ bool "Deterministic task and CPU time accounting"
+ depends on PPC64
+ default y
+ help
+ Select this option to enable more accurate task and CPU time
+ accounting. This is done by reading a CPU counter on each
+ kernel entry and exit and on transitions within the kernel
+ between system, softirq and hardirq state, so there is a
+ small performance impact. This also enables accounting of
+ stolen time on logically-partitioned systems running on
+ IBM POWER5-based machines.
+
+ If in doubt, say Y here.
+
config SMP
depends on PPC_STD_MMU
bool "Symmetric multi-processing support"
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
- bool " IBM pSeries & new (POWER5-based) iSeries"
+ bool "IBM pSeries & new (POWER5-based) iSeries"
select PPC_I8259
select PPC_RTAS
select RTAS_ERROR_LOGGING
default y
config PPC_CHRP
- bool " Common Hardware Reference Platform (CHRP) based machines"
+ bool "Common Hardware Reference Platform (CHRP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
select PPC_I8259
select PPC_INDIRECT_PCI
default y
config PPC_PMAC
- bool " Apple PowerMac based machines"
+ bool "Apple PowerMac based machines"
depends on PPC_MULTIPLATFORM
select PPC_INDIRECT_PCI if PPC32
select PPC_MPC106 if PPC32
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
+ select PPC_970_NAP
default y
config PPC_PREP
- bool " PowerPC Reference Platform (PReP) based machines"
+ bool "PowerPC Reference Platform (PReP) based machines"
depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
select PPC_I8259
select PPC_INDIRECT_PCI
config PPC_MAPLE
depends on PPC_MULTIPLATFORM && PPC64
- bool " Maple 970FX Evaluation Board"
+ bool "Maple 970FX Evaluation Board"
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
select PPC_UDBG_16550
+ select PPC_970_NAP
default n
help
This option enables support for the Maple 970FX Evaluation Board.
For more informations, refer to <http://www.970eval.com>
config PPC_CELL
- bool " Cell Broadband Processor Architecture"
+ bool
+ default n
+
+config PPC_CELL_NATIVE
+ bool
+ select PPC_CELL
+ default n
+
+config PPC_IBM_CELL_BLADE
+ bool " IBM Cell Blade"
depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL_NATIVE
select PPC_RTAS
select MMIO_NVRAM
select PPC_UDBG_16550
depends on PPC_MAPLE
default y
-config CELL_IIC
- depends on PPC_CELL
- bool
- default y
-
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
bool
default n
+config PPC_970_NAP
+ bool
+ default n
+
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC
If in doubt, say Y here.
config TAU
- bool "Thermal Management Support"
+ bool "On-chip CPU temperature sensor support"
depends on 6xx
help
G3 and G4 processors have an on-chip temperature sensor called the
on-die temperature in /proc/cpuinfo if the cpu supports it.
Unfortunately, on some chip revisions, this sensor is very inaccurate
- and in some cases, does not work at all, so don't assume the cpu
+ and in many cases, does not work at all, so don't assume the cpu
temp is actually what /proc/cpuinfo says it is.
config TAU_INT
source arch/powerpc/platforms/4xx/Kconfig
source arch/powerpc/platforms/83xx/Kconfig
source arch/powerpc/platforms/85xx/Kconfig
+source arch/powerpc/platforms/86xx/Kconfig
source arch/powerpc/platforms/8xx/Kconfig
source arch/powerpc/platforms/cell/Kconfig
strongly in flux, so no good recommendation can be made.
config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
+ bool "Build a kdump crash kernel (EXPERIMENTAL)"
depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
help
Build a kernel suitable for use as a kdump capture kernel.
depends on PPC64
default y if SMP && PPC_PSERIES
+config NODES_SHIFT
+ int
+ default "4"
+ depends on NEED_MULTIPLE_NODES
+
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on PPC64
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
depends on PPC64 && SMP
- default off
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with POWER5 cpus at a cost of slightly increased
config PPC_I8259
bool
- default y if 85xx
+ default y if MPC8641_HPCN
default n
config PPC_INDIRECT_PCI
bool
depends on PCI
- default y if 40x || 44x || 85xx
+ default y if 40x || 44x
default n
config EISA
bool
config PCI
- bool "PCI support" if 40x || CPM2 || PPC_83xx || 85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
- default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !85xx
+ bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
+ default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
default y
config 8260_PCI9
- bool " Enable workaround for MPC826x erratum PCI 9"
+ bool "Enable workaround for MPC826x erratum PCI 9"
depends on PCI_8260 && !ADS8272
default y
choice
- prompt " IDMA channel for PCI 9 workaround"
+ prompt "IDMA channel for PCI 9 workaround"
depends on 8260_PCI9
config 8260_PCI9_IDMA1
endchoice
+source "drivers/pci/pcie/Kconfig"
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on PPC64
+ depends on PPC64 && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
projects / linux-2.6 / blobdiff