[SCSI] NCR5380 family: convert to accessors & !use_sg cleanup

[linux-2.6] / drivers / ata / pata_sl82c105.c

diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index e5aaec4..1388cef 100644 (file)
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.3.1"
+#define DRV_VERSION "0.3.2"
 
 enum {
        /*
@@ -43,23 +43,24 @@ enum {
 
 /**
  *     sl82c105_pre_reset              -       probe begin
- *     @ap: ATA port
+ *     @link: ATA link
  *     @deadline: deadline jiffies for the operation
  *
  *     Set up cable type and use generic probe init
  */
 
-static int sl82c105_pre_reset(struct ata_port *ap, unsigned long deadline)
+static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline)
 {
        static const struct pci_bits sl82c105_enable_bits[] = {
                { 0x40, 1, 0x01, 0x01 },
                { 0x40, 1, 0x10, 0x10 }
        };
+       struct ata_port *ap = link->ap;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
        if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
                return -ENOENT;
-       return ata_std_prereset(ap, deadline);
+       return ata_std_prereset(link, deadline);
 }
 
 
@@ -224,7 +225,6 @@ static struct scsi_host_template sl82c105_sht = {
 };
 
 static struct ata_port_operations sl82c105_port_ops = {
-       .port_disable   = ata_port_disable,
        .set_piomode    = sl82c105_set_piomode,
        .mode_filter    = ata_pci_default_filter,
 
@@ -253,9 +253,8 @@ static struct ata_port_operations sl82c105_port_ops = {
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
        .irq_on         = ata_irq_on,
-       .irq_ack        = ata_irq_ack,
 
-       .port_start     = ata_port_start,
+       .port_start     = ata_sff_port_start,
 };
 
 /**
@@ -270,7 +269,6 @@ static struct ata_port_operations sl82c105_port_ops = {
 static int sl82c105_bridge_revision(struct pci_dev *pdev)
 {
        struct pci_dev *bridge;
-       u8 rev;
 
        /*
         * The bridge should be part of the same device, but function 0.
@@ -292,10 +290,8 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
        /*
         * We need to find function 0's revision, not function 1
         */
-       pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
-
        pci_dev_put(bridge);
-       return rev;
+       return bridge->revision;
 }
 
 
@@ -303,14 +299,14 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 {
        static const struct ata_port_info info_dma = {
                .sht = &sl82c105_sht,
-               .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .mwdma_mask = 0x07,
                .port_ops = &sl82c105_port_ops
        };
        static const struct ata_port_info info_early = {
                .sht = &sl82c105_sht,
-               .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .port_ops = &sl82c105_port_ops
        };