#include <linux/uwb/umc.h>
#include <linux/pci.h>
-static int umc_bus_unbind_helper(struct device *dev, void *data)
+static int umc_bus_pre_reset_helper(struct device *dev, void *data)
{
- struct device *parent = data;
+ int ret = 0;
- if (dev->parent == parent && dev->driver)
- device_release_driver(dev);
- return 0;
+ if (dev->driver) {
+ struct umc_dev *umc = to_umc_dev(dev);
+ struct umc_driver *umc_drv = to_umc_driver(dev->driver);
+
+ if (umc_drv->pre_reset)
+ ret = umc_drv->pre_reset(umc);
+ else
+ device_release_driver(dev);
+ }
+ return ret;
+}
+
+static int umc_bus_post_reset_helper(struct device *dev, void *data)
+{
+ int ret = 0;
+
+ if (dev->driver) {
+ struct umc_dev *umc = to_umc_dev(dev);
+ struct umc_driver *umc_drv = to_umc_driver(dev->driver);
+
+ if (umc_drv->post_reset)
+ ret = umc_drv->post_reset(umc);
+ } else
+ ret = device_attach(dev);
+
+ return ret;
}
/**
* umc_controller_reset - reset the whole UMC controller
* @umc: the UMC device for the radio controller.
*
- * Drivers will be unbound from all UMC devices belonging to the
- * controller and then the radio controller will be rebound. The
- * radio controller is expected to do a full hardware reset when it is
- * probed.
+ * Drivers or all capabilities of the controller will have their
+ * pre_reset methods called or be unbound from their device. Then all
+ * post_reset methods will be called or the drivers will be rebound.
+ *
+ * Radio controllers must provide pre_reset and post_reset methods and
+ * reset the hardware in their start method.
*
* If this is called while a probe() or remove() is in progress it
* will return -EAGAIN and not perform the reset.
int umc_controller_reset(struct umc_dev *umc)
{
struct device *parent = umc->dev.parent;
- int ret;
+ int ret = 0;
- if (down_trylock(&parent->sem))
+ if(down_trylock(&parent->sem))
return -EAGAIN;
- bus_for_each_dev(&umc_bus_type, NULL, parent, umc_bus_unbind_helper);
- ret = device_attach(&umc->dev);
- if (ret == 1)
- ret = 0;
+ ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
+ if (ret >= 0)
+ device_for_each_child(parent, parent, umc_bus_post_reset_helper);
up(&parent->sem);
return ret;
if (!dev->driver)
ret = device_attach(dev);
- return ret < 0 ? ret : 0;
+ return ret;
}
-static void umc_bus_rescan(void)
+static void umc_bus_rescan(struct device *parent)
{
int err;
* We can't use bus_rescan_devices() here as it deadlocks when
* it tries to retake the dev->parent semaphore.
*/
- err = bus_for_each_dev(&umc_bus_type, NULL, NULL, umc_bus_rescan_helper);
+ err = device_for_each_child(parent, NULL, umc_bus_rescan_helper);
if (err < 0)
printk(KERN_WARNING "%s: rescan of bus failed: %d\n",
KBUILD_MODNAME, err);
if (err)
put_device(dev);
else
- umc_bus_rescan();
+ umc_bus_rescan(dev->parent);
return err;
}