/* SMP locking strategy:
*
- * lock: Held during all operations except TX packet
- * processing.
+ * lock: Held during reset, PHY access, timer, and when
+ * updating tg3_flags and tg3_flags2.
*
- * tx_lock: Held during tg3_start_xmit and tg3_tx
+ * tx_lock: Held during tg3_start_xmit and tg3_tx only
+ * when calling netif_[start|stop]_queue.
+ * tg3_start_xmit is protected by netif_tx_lock.
*
* Both of these locks are to be held with BH safety.
+ *
+ * Because the IRQ handler, tg3_poll, and tg3_start_xmit
+ * are running lockless, it is necessary to completely
+ * quiesce the chip with tg3_netif_stop and tg3_full_lock
+ * before reconfiguring the device.
+ *
+ * indirect_lock: Held when accessing registers indirectly
+ * with IRQ disabling.
*/
spinlock_t lock;
spinlock_t indirect_lock;
#define TG3_FLAG_ENABLE_ASF 0x00000020
#define TG3_FLAG_5701_REG_WRITE_BUG 0x00000040
#define TG3_FLAG_POLL_SERDES 0x00000080
-#if defined(CONFIG_X86)
#define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100
-#else
-#define TG3_FLAG_MBOX_WRITE_REORDER 0 /* disables code too */
-#endif
#define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200
#define TG3_FLAG_WOL_SPEED_100MB 0x00000400
#define TG3_FLAG_WOL_ENABLE 0x00000800
#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
#define TG3_FLAG_PCI_32BIT 0x00080000
#define TG3_FLAG_SRAM_USE_CONFIG 0x00100000
+#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000
#define TG3_FLAG_SERDES_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000