regulator: sysfs attribute reduction (v2)
[linux-2.6] / Documentation / ABI / testing / sysfs-class-regulator
index 3731f6f..873ef1f 100644 (file)
@@ -3,8 +3,9 @@ Date:           April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
-               state. This holds the regulator output state.
+               Some regulator directories will contain a field called
+               state. This reports the regulator enable status, for
+               regulators which can report that value.
 
                This will be one of the following strings:
 
@@ -18,7 +19,8 @@ Description:
                'disabled' means the regulator output is OFF and is not
                supplying power to the system..
 
-               'unknown' means software cannot determine the state.
+               'unknown' means software cannot determine the state, or
+               the reported state is invalid.
 
                NOTE: this field can be used in conjunction with microvolts
                and microamps to determine regulator output levels.
@@ -53,9 +55,10 @@ Date:                April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                microvolts. This holds the regulator output voltage setting
-               measured in microvolts (i.e. E-6 Volts).
+               measured in microvolts (i.e. E-6 Volts), for regulators
+               which can report that voltage.
 
                NOTE: This value should not be used to determine the regulator
                output voltage level as this value is the same regardless of
@@ -67,9 +70,10 @@ Date:                April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                microamps. This holds the regulator output current limit
-               setting measured in microamps (i.e. E-6 Amps).
+               setting measured in microamps (i.e. E-6 Amps), for regulators
+               which can report that current.
 
                NOTE: This value should not be used to determine the regulator
                output current level as this value is the same regardless of
@@ -81,8 +85,9 @@ Date:         April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
-               opmode. This holds the regulator operating mode setting.
+               Some regulator directories will contain a field called
+               opmode. This holds the current regulator operating mode,
+               for regulators which can report it.
 
                The opmode value can be one of the following strings:
 
@@ -92,7 +97,7 @@ Description:
                'standby'
                'unknown'
 
-               The modes are described in include/linux/regulator/regulator.h
+               The modes are described in include/linux/regulator/consumer.h
 
                NOTE: This value should not be used to determine the regulator
                output operating mode as this value is the same regardless of
@@ -104,9 +109,10 @@ Date:              April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                min_microvolts. This holds the minimum safe working regulator
-               output voltage setting for this domain measured in microvolts.
+               output voltage setting for this domain measured in microvolts,
+               for regulators which support voltage constraints.
 
                NOTE: this will return the string 'constraint not defined' if
                the power domain has no min microvolts constraint defined by
@@ -118,9 +124,10 @@ Date:              April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                max_microvolts. This holds the maximum safe working regulator
-               output voltage setting for this domain measured in microvolts.
+               output voltage setting for this domain measured in microvolts,
+               for regulators which support voltage constraints.
 
                NOTE: this will return the string 'constraint not defined' if
                the power domain has no max microvolts constraint defined by
@@ -132,10 +139,10 @@ Date:             April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                min_microamps. This holds the minimum safe working regulator
                output current limit setting for this domain measured in
-               microamps.
+               microamps, for regulators which support current constraints.
 
                NOTE: this will return the string 'constraint not defined' if
                the power domain has no min microamps constraint defined by
@@ -147,10 +154,10 @@ Date:             April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                max_microamps. This holds the maximum safe working regulator
                output current limit setting for this domain measured in
-               microamps.
+               microamps, for regulators which support current constraints.
 
                NOTE: this will return the string 'constraint not defined' if
                the power domain has no max microamps constraint defined by
@@ -185,7 +192,7 @@ Date:               April 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                requested_microamps. This holds the total requested load
                current in microamps for this regulator from all its consumer
                devices.
@@ -204,125 +211,102 @@ Date:           May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_mem_microvolts. This holds the regulator output
                voltage setting for this domain measured in microvolts when
-               the system is suspended to memory.
-
-               NOTE: this will return the string 'not defined' if
-               the power domain has no suspend to memory voltage defined by
-               platform code.
+               the system is suspended to memory, for voltage regulators
+               implementing suspend voltage configuration constraints.
 
 What:          /sys/class/regulator/.../suspend_disk_microvolts
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_disk_microvolts. This holds the regulator output
                voltage setting for this domain measured in microvolts when
-               the system is suspended to disk.
-
-               NOTE: this will return the string 'not defined' if
-               the power domain has no suspend to disk voltage defined by
-               platform code.
+               the system is suspended to disk, for voltage regulators
+               implementing suspend voltage configuration constraints.
 
 What:          /sys/class/regulator/.../suspend_standby_microvolts
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_standby_microvolts. This holds the regulator output
                voltage setting for this domain measured in microvolts when
-               the system is suspended to standby.
-
-               NOTE: this will return the string 'not defined' if
-               the power domain has no suspend to standby voltage defined by
-               platform code.
+               the system is suspended to standby, for voltage regulators
+               implementing suspend voltage configuration constraints.
 
 What:          /sys/class/regulator/.../suspend_mem_mode
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_mem_mode. This holds the regulator operating mode
                setting for this domain when the system is suspended to
-               memory.
-
-               NOTE: this will return the string 'not defined' if
-               the power domain has no suspend to memory mode defined by
-               platform code.
+               memory, for regulators implementing suspend mode
+               configuration constraints.
 
 What:          /sys/class/regulator/.../suspend_disk_mode
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_disk_mode. This holds the regulator operating mode
-               setting for this domain when the system is suspended to disk.
-
-               NOTE: this will return the string 'not defined' if
-               the power domain has no suspend to disk mode defined by
-               platform code.
+               setting for this domain when the system is suspended to disk,
+               for regulators implementing suspend mode configuration
+               constraints.
 
 What:          /sys/class/regulator/.../suspend_standby_mode
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_standby_mode. This holds the regulator operating mode
                setting for this domain when the system is suspended to
-               standby.
-
-               NOTE: this will return the string 'not defined' if
-               the power domain has no suspend to standby mode defined by
-               platform code.
+               standby, for regulators implementing suspend mode
+               configuration constraints.
 
 What:          /sys/class/regulator/.../suspend_mem_state
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_mem_state. This holds the regulator operating state
-               when suspended to memory.
-
-               This will be one of the following strings:
+               when suspended to memory, for regulators implementing suspend
+               configuration constraints.
 
-               'enabled'
-               'disabled'
-               'not defined'
+               This will be one of the same strings reported by
+               the "state" attribute.
 
 What:          /sys/class/regulator/.../suspend_disk_state
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_disk_state. This holds the regulator operating state
-               when suspended to disk.
-
-               This will be one of the following strings:
+               when suspended to disk, for regulators implementing
+               suspend configuration constraints.
 
-               'enabled'
-               'disabled'
-               'not defined'
+               This will be one of the same strings reported by
+               the "state" attribute.
 
 What:          /sys/class/regulator/.../suspend_standby_state
 Date:          May 2008
 KernelVersion: 2.6.26
 Contact:       Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
-               Each regulator directory will contain a field called
+               Some regulator directories will contain a field called
                suspend_standby_state. This holds the regulator operating
-               state when suspended to standby.
-
-               This will be one of the following strings:
+               state when suspended to standby, for regulators implementing
+               suspend configuration constraints.
 
-               'enabled'
-               'disabled'
-               'not defined'
+               This will be one of the same strings reported by
+               the "state" attribute.