#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/mod_devicetable.h>
+#include <linux/dma-mapping.h>
#include <linux/ssb/ssb_regs.h>
/* Lowlevel read/write operations on the device MMIO.
* Internal, don't use that outside of ssb. */
struct ssb_bus_ops {
+ u8 (*read8)(struct ssb_device *dev, u16 offset);
u16 (*read16)(struct ssb_device *dev, u16 offset);
u32 (*read32)(struct ssb_device *dev, u16 offset);
+ void (*write8)(struct ssb_device *dev, u16 offset, u8 value);
void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
+#ifdef CONFIG_SSB_BLOCKIO
+ void (*block_read)(struct ssb_device *dev, void *buffer,
+ size_t count, u16 offset, u8 reg_width);
+ void (*block_write)(struct ssb_device *dev, const void *buffer,
+ size_t count, u16 offset, u8 reg_width);
+#endif
};
const struct ssb_bus_ops *ops;
struct device *dev;
+
struct ssb_bus *bus;
struct ssb_device_id id;
/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
struct pcmcia_device *host_pcmcia;
-#ifdef CONFIG_SSB_PCIHOST
+#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
- struct mutex pci_sprom_mutex;
+ struct mutex sprom_mutex;
#endif
/* ID information about the Chip. */
struct ssb_device devices[SSB_MAX_NR_CORES];
u8 nr_devices;
- /* Reference count. Number of suspended devices. */
- u8 suspend_cnt;
-
/* Software ID number for this bus. */
unsigned int busnumber;
struct ssb_boardinfo boardinfo;
/* Contents of the SPROM. */
struct ssb_sprom sprom;
+ /* If the board has a cardbus slot, this is set to true. */
+ bool has_cardbus_slot;
+
+#ifdef CONFIG_SSB_EMBEDDED
+ /* Lock for GPIO register access. */
+ spinlock_t gpio_lock;
+#endif /* EMBEDDED */
/* Internal-only stuff follows. Do not touch. */
struct list_head list;
/* The initialization-invariants. */
struct ssb_init_invariants {
+ /* Versioning information about the PCB. */
struct ssb_boardinfo boardinfo;
+ /* The SPROM information. That's either stored in an
+ * EEPROM or NVRAM on the board. */
struct ssb_sprom sprom;
+ /* If the board has a cardbus slot, this is set to true. */
+ bool has_cardbus_slot;
};
/* Type of function to fetch the invariants. */
typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
extern void ssb_bus_unregister(struct ssb_bus *bus);
+/* Suspend a SSB bus.
+ * Call this from the parent bus suspend routine. */
+extern int ssb_bus_suspend(struct ssb_bus *bus);
+/* Resume a SSB bus.
+ * Call this from the parent bus resume routine. */
+extern int ssb_bus_resume(struct ssb_bus *bus);
+
extern u32 ssb_clockspeed(struct ssb_bus *bus);
/* Is the device enabled in hardware? */
/* Device MMIO register read/write functions. */
+static inline u8 ssb_read8(struct ssb_device *dev, u16 offset)
+{
+ return dev->ops->read8(dev, offset);
+}
static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
{
return dev->ops->read16(dev, offset);
{
return dev->ops->read32(dev, offset);
}
+static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
+{
+ dev->ops->write8(dev, offset, value);
+}
static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
{
dev->ops->write16(dev, offset, value);
{
dev->ops->write32(dev, offset, value);
}
+#ifdef CONFIG_SSB_BLOCKIO
+static inline void ssb_block_read(struct ssb_device *dev, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ dev->ops->block_read(dev, buffer, count, offset, reg_width);
+}
+
+static inline void ssb_block_write(struct ssb_device *dev, const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ dev->ops->block_write(dev, buffer, count, offset, reg_width);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+/* The SSB DMA API. Use this API for any DMA operation on the device.
+ * This API basically is a wrapper that calls the correct DMA API for
+ * the host device type the SSB device is attached to. */
/* Translation (routing) bits that need to be ORed to DMA
* addresses before they are given to a device. */
#define SSB_DMA_TRANSLATION_MASK 0xC0000000
#define SSB_DMA_TRANSLATION_SHIFT 30
-extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask);
+extern int ssb_dma_set_mask(struct ssb_device *dev, u64 mask);
+
+extern void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp_flags);
+extern void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle,
+ gfp_t gfp_flags);
+
+static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
+{
+#ifdef CONFIG_SSB_DEBUG
+ printk(KERN_ERR "SSB: BUG! Calling DMA API for "
+ "unsupported bustype %d\n", dev->bus->bustype);
+#endif /* DEBUG */
+}
+
+static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+ return pci_dma_mapping_error(dev->bus->host_pci, addr);
+ case SSB_BUSTYPE_SSB:
+ return dma_mapping_error(dev->dev, addr);
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+ return -ENOSYS;
+}
+
+static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p,
+ size_t size, enum dma_data_direction dir)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+ return pci_map_single(dev->bus->host_pci, p, size, dir);
+ case SSB_BUSTYPE_SSB:
+ return dma_map_single(dev->dev, p, size, dir);
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+ return 0;
+}
+
+static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction dir)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+ pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir);
+ return;
+ case SSB_BUSTYPE_SSB:
+ dma_unmap_single(dev->dev, dma_addr, size, dir);
+ return;
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+}
+
+static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev,
+ dma_addr_t dma_addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+ pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+ size, dir);
+ return;
+ case SSB_BUSTYPE_SSB:
+ dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir);
+ return;
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+}
+
+static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev,
+ dma_addr_t dma_addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+ pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+ size, dir);
+ return;
+ case SSB_BUSTYPE_SSB:
+ dma_sync_single_for_device(dev->dev, dma_addr, size, dir);
+ return;
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+}
+
+static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev,
+ dma_addr_t dma_addr,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+ /* Just sync everything. That's all the PCI API can do. */
+ pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+ offset + size, dir);
+ return;
+ case SSB_BUSTYPE_SSB:
+ dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset,
+ size, dir);
+ return;
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+}
+
+static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev,
+ dma_addr_t dma_addr,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+ /* Just sync everything. That's all the PCI API can do. */
+ pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+ offset + size, dir);
+ return;
+ case SSB_BUSTYPE_SSB:
+ dma_sync_single_range_for_device(dev->dev, dma_addr, offset,
+ size, dir);
+ return;
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+}
#ifdef CONFIG_SSB_PCIHOST
extern u32 ssb_admatch_base(u32 adm);
extern u32 ssb_admatch_size(u32 adm);
+/* PCI device mapping and fixup routines.
+ * Called from the architecture pcibios init code.
+ * These are only available on SSB_EMBEDDED configurations. */
+#ifdef CONFIG_SSB_EMBEDDED
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif /* CONFIG_SSB_EMBEDDED */
#endif /* LINUX_SSB_H_ */