However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a SCSI device.
+config SCSI_TGT
+ tristate "SCSI target support"
+ depends on SCSI && EXPERIMENTAL
+ ---help---
+ If you want to use SCSI target mode drivers enable this option.
+ If you choose M, the module will be called scsi_tgt.
+
config SCSI_NETLINK
bool
default n
default y
---help---
This option enables support for the various files in
- /proc/scsi. In Linux 2.6 this has been superceeded by
+ /proc/scsi. In Linux 2.6 this has been superseded by
files in sysfs but many legacy applications rely on this.
- If unusure say Y.
+ If unsure say Y.
comment "SCSI support type (disk, tape, CD-ROM)"
depends on SCSI
tristate "SCSI OnStream SC-x0 tape support"
depends on SCSI
---help---
- The OnStream SC-x0 SCSI tape drives can not be driven by the
+ The OnStream SC-x0 SCSI tape drives cannot be driven by the
standard st driver, but instead need this special osst driver and
use the /dev/osstX char device nodes (major 206). Via usb-storage
and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
there should be no noticeable performance impact as long as you have
logging turned off.
+config SCSI_SCAN_ASYNC
+ bool "Asynchronous SCSI scanning"
+ depends on SCSI
+ help
+ The SCSI subsystem can probe for devices while the rest of the
+ system continues booting, and even probe devices on different
+ busses in parallel, leading to a significant speed-up.
+ If you have built SCSI as modules, enabling this option can
+ be a problem as the devices may not have been found by the
+ time your system expects them to have been. You can load the
+ scsi_wait_scan module to ensure that all scans have completed.
+ If you build your SCSI drivers into the kernel, then everything
+ will work fine if you say Y here.
+
+ You can override this choice by specifying scsi_mod.scan="sync"
+ or "async" on the kernel's command line.
+
menu "SCSI Transports"
depends on SCSI
To compile this driver as a module, choose M here: the
module will be called ibmvscsic.
+config SCSI_IBMVSCSIS
+ tristate "IBM Virtual SCSI Server support"
+ depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP
+ help
+ This is the SRP target driver for IBM pSeries virtual environments.
+
+ The userspace component needed to initialize the driver and
+ documentation can be found:
+
+ http://stgt.berlios.de/
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvstgt.
+
config SCSI_INITIO
tristate "Initio 9100U(W) support"
depends on PCI && SCSI
many PA-RISC workstations & servers. If you do not know whether you
have a Lasi chip, it is safe to say "Y" here.
+config SCSI_SNI_53C710
+ tristate "SNI RM SCSI support for 53c710"
+ depends on SNI_RM && SCSI
+ select SCSI_SPI_ATTRS
+ select 53C700_LE_ON_BE
+ help
+ This is a driver for the onboard SCSI controller found in older
+ SNI RM workstations & servers.
+
config 53C700_LE_ON_BE
bool
depends on SCSI_LASI700
tristate "Promise SuperTrak EX Series support"
depends on PCI && SCSI
---help---
- This driver supports Promise SuperTrak EX8350/8300/16350/16300
- Storage controllers.
+ This driver supports Promise SuperTrak EX series storage controllers.
+
+ Promise provides Linux RAID configuration utility for these
+ controllers. Please visit <http://www.promise.com> to download.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stex.
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
config SCSI_IPR
tristate "IBM Power Linux RAID adapter support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && ATA
select FW_LOADER
---help---
This driver supports the IBM Power Linux family RAID adapters.
config SCSI_IPR_TRACE
bool "enable driver internal trace"
depends on SCSI_IPR
+ default y
help
If you say Y here, the driver will trace all commands issued
to the adapter. Performance impact is minimal. Trace can be
config SCSI_IPR_DUMP
bool "enable adapter dump support"
depends on SCSI_IPR
+ default y
help
If you say Y here, the driver will support adapter crash dump.
If you enable this support, the iprdump daemon can be used
module will be called qlogicpti.
source "drivers/scsi/qla2xxx/Kconfig"
+source "drivers/scsi/qla4xxx/Kconfig"
config SCSI_LPFC
tristate "Emulex LightPulse Fibre Channel Support"
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI && BROKEN
+ depends on X86 && ISA && SCSI
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
available from <http://www.tldp.org/docs.html#howto>. If it
- doesn't work out of the box, you may have to change some settings in
- <file:drivers/scsi/seagate.h>.
+ doesn't work out of the box, you may have to change some macros at
+ compiletime, which are described in <file:drivers/scsi/seagate.c>.
To compile this driver as a module, choose M here: the
module will be called seagate.
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
- depends on SUN3 && SCSI && BROKEN
+ depends on SUN3 && SCSI
select SCSI_SPI_ATTRS
help
This option will enable support for the OBIO (onboard io) NCR5380
called zfcp. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>.
+config SCSI_SRP
+ tristate "SCSI RDMA Protocol helper library"
+ depends on SCSI && PCI
+ select SCSI_TGT
+ help
+ If you wish to use SRP target drivers, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called libsrp.
+
endmenu
source "drivers/scsi/pcmcia/Kconfig"