#include "rt2x00.h"
#include "rt2x00lib.h"
+struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue)
+{
+ struct sk_buff *skb;
+ unsigned int frame_size;
+ unsigned int reserved_size;
+
+ /*
+ * The frame size includes descriptor size, because the
+ * hardware directly receive the frame into the skbuffer.
+ */
+ frame_size = queue->data_size + queue->desc_size;
+
+ /*
+ * For the allocation we should keep a few things in mind:
+ * 1) 4byte alignment of 802.11 payload
+ *
+ * For (1) we need at most 4 bytes to guarentee the correct
+ * alignment. We are going to optimize the fact that the chance
+ * that the 802.11 header_size % 4 == 2 is much bigger then
+ * anything else. However since we need to move the frame up
+ * to 3 bytes to the front, which means we need to preallocate
+ * 6 bytes.
+ */
+ reserved_size = 6;
+
+ /*
+ * Allocate skbuffer.
+ */
+ skb = dev_alloc_skb(frame_size + reserved_size);
+ if (!skb)
+ return NULL;
+
+ skb_reserve(skb, reserved_size);
+ skb_put(skb, frame_size);
+
+ return skb;
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_alloc_rxskb);
+
+void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
+ struct txentry_desc *txdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
+ struct ieee80211_rate *rate =
+ ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
+ const struct rt2x00_rate *hwrate;
+ unsigned int data_length;
+ unsigned int duration;
+ unsigned int residual;
+ u16 frame_control;
+
+ memset(txdesc, 0, sizeof(*txdesc));
+
+ /*
+ * Initialize information from queue
+ */
+ txdesc->queue = entry->queue->qid;
+ txdesc->cw_min = entry->queue->cw_min;
+ txdesc->cw_max = entry->queue->cw_max;
+ txdesc->aifs = entry->queue->aifs;
+
+ /* Data length should be extended with 4 bytes for CRC */
+ data_length = entry->skb->len + 4;
+
+ /*
+ * Read required fields from ieee80211 header.
+ */
+ frame_control = le16_to_cpu(hdr->frame_control);
+
+ /*
+ * Check whether this frame is to be acked.
+ */
+ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
+ __set_bit(ENTRY_TXD_ACK, &txdesc->flags);
+
+ /*
+ * Check if this is a RTS/CTS frame
+ */
+ if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) {
+ __set_bit(ENTRY_TXD_BURST, &txdesc->flags);
+ if (is_rts_frame(frame_control))
+ __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags);
+ else
+ __set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags);
+ if (tx_info->control.rts_cts_rate_idx >= 0)
+ rate =
+ ieee80211_get_rts_cts_rate(rt2x00dev->hw, tx_info);
+ }
+
+ /*
+ * Determine retry information.
+ */
+ txdesc->retry_limit = tx_info->control.retry_limit;
+ if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
+ __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags);
+
+ /*
+ * Check if more fragments are pending
+ */
+ if (ieee80211_has_morefrags(hdr->frame_control)) {
+ __set_bit(ENTRY_TXD_BURST, &txdesc->flags);
+ __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags);
+ }
+
+ /*
+ * Beacons and probe responses require the tsf timestamp
+ * to be inserted into the frame.
+ */
+ if (txdesc->queue == QID_BEACON || is_probe_resp(frame_control))
+ __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags);
+
+ /*
+ * Determine with what IFS priority this frame should be send.
+ * Set ifs to IFS_SIFS when the this is not the first fragment,
+ * or this fragment came after RTS/CTS.
+ */
+ if (test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) {
+ txdesc->ifs = IFS_SIFS;
+ } else if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) {
+ __set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags);
+ txdesc->ifs = IFS_BACKOFF;
+ } else {
+ txdesc->ifs = IFS_SIFS;
+ }
+
+ /*
+ * PLCP setup
+ * Length calculation depends on OFDM/CCK rate.
+ */
+ hwrate = rt2x00_get_rate(rate->hw_value);
+ txdesc->signal = hwrate->plcp;
+ txdesc->service = 0x04;
+
+ if (hwrate->flags & DEV_RATE_OFDM) {
+ __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags);
+
+ txdesc->length_high = (data_length >> 6) & 0x3f;
+ txdesc->length_low = data_length & 0x3f;
+ } else {
+ /*
+ * Convert length to microseconds.
+ */
+ residual = get_duration_res(data_length, hwrate->bitrate);
+ duration = get_duration(data_length, hwrate->bitrate);
+
+ if (residual != 0) {
+ duration++;
+
+ /*
+ * Check if we need to set the Length Extension
+ */
+ if (hwrate->bitrate == 110 && residual <= 30)
+ txdesc->service |= 0x80;
+ }
+
+ txdesc->length_high = (duration >> 8) & 0xff;
+ txdesc->length_low = duration & 0xff;
+
+ /*
+ * When preamble is enabled we should set the
+ * preamble bit for the signal.
+ */
+ if (rt2x00_get_rate_preamble(rate->hw_value))
+ txdesc->signal |= 0x08;
+ }
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_create_tx_descriptor);
+
+void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
+ struct txentry_desc *txdesc)
+{
+ struct data_queue *queue = entry->queue;
+ struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+
+ rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+ /*
+ * All processing on the frame has been completed, this means
+ * it is now ready to be dumped to userspace through debugfs.
+ */
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb);
+
+ /*
+ * Check if we need to kick the queue, there are however a few rules
+ * 1) Don't kick beacon queue
+ * 2) Don't kick unless this is the last in frame in a burst.
+ * When the burst flag is set, this frame is always followed
+ * by another frame which in some way are related to eachother.
+ * This is true for fragments, RTS or CTS-to-self frames.
+ * 3) Rule 2 can be broken when the available entries
+ * in the queue are less then a certain threshold.
+ */
+ if (entry->queue->qid == QID_BEACON)
+ return;
+
+ if (rt2x00queue_threshold(queue) ||
+ !test_bit(ENTRY_TXD_BURST, &txdesc->flags))
+ rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_write_tx_descriptor);
+
+int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
+{
+ struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
+ struct txentry_desc txdesc;
+
+ if (unlikely(rt2x00queue_full(queue)))
+ return -EINVAL;
+
+ if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
+ ERROR(queue->rt2x00dev,
+ "Arrived at non-free entry in the non-full queue %d.\n"
+ "Please file bug report to %s.\n",
+ queue->qid, DRV_PROJECT);
+ return -EINVAL;
+ }
+
+ /*
+ * Copy all TX descriptor information into txdesc,
+ * after that we are free to use the skb->cb array
+ * for our information.
+ */
+ entry->skb = skb;
+ rt2x00queue_create_tx_descriptor(entry, &txdesc);
+
+ if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
+ __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ return -EIO;
+ }
+
+ __set_bit(ENTRY_DATA_PENDING, &entry->flags);
+
+ rt2x00queue_index_inc(queue, Q_INDEX);
+ rt2x00queue_write_tx_descriptor(entry, &txdesc);
+
+ return 0;
+}
+
struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
- const unsigned int queue)
+ const enum data_queue_qid queue)
{
int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
- if (queue < rt2x00dev->hw->queues && rt2x00dev->tx)
+ if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx)
return &rt2x00dev->tx[queue];
if (!rt2x00dev->bcn)
return NULL;
- if (queue == RT2X00_BCN_QUEUE_BEACON)
+ if (queue == QID_BEACON)
return &rt2x00dev->bcn[0];
- else if (queue == RT2X00_BCN_QUEUE_ATIM && atim)
+ else if (queue == QID_ATIM && atim)
return &rt2x00dev->bcn[1];
return NULL;
rt2x00queue_reset(queue);
queue->limit = qdesc->entry_num;
+ queue->threshold = DIV_ROUND_UP(qdesc->entry_num, 10);
queue->data_size = qdesc->data_size;
queue->desc_size = qdesc->desc_size;
/*
* We need the following queues:
* RX: 1
- * TX: hw->queues
+ * TX: ops->tx_queues
* Beacon: 1
* Atim: 1 (if required)
*/
- rt2x00dev->data_queues = 2 + rt2x00dev->hw->queues + req_atim;
+ rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim;
queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL);
if (!queue) {
*/
rt2x00dev->rx = queue;
rt2x00dev->tx = &queue[1];
- rt2x00dev->bcn = &queue[1 + rt2x00dev->hw->queues];
+ rt2x00dev->bcn = &queue[1 + rt2x00dev->ops->tx_queues];
/*
* Initialize queue parameters.
* TX: qid = QID_AC_BE + index
* TX: cw_min: 2^5 = 32.
* TX: cw_max: 2^10 = 1024.
- * BCN & Atim: qid = QID_MGMT
+ * BCN: qid = QID_BEACON
+ * ATIM: qid = QID_ATIM
*/
rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX);
tx_queue_for_each(rt2x00dev, queue)
rt2x00queue_init(rt2x00dev, queue, qid++);
- rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_MGMT);
+ rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_BEACON);
if (req_atim)
- rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_MGMT);
+ rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_ATIM);
return 0;
}