PCI: drivers/pcmcia/i82092.c: fix up after pci_bus_region changes

[linux-2.6] / drivers / ide / Kconfig

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 92b0117..df752e6 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -4,10 +4,14 @@
 # Andre Hedrick <andre@linux-ide.org>
 #
 
+# Select HAVE_IDE if IDE is supported
+config HAVE_IDE
+       def_bool n
+
 menuconfig IDE
        tristate "ATA/ATAPI/MFM/RLL support"
+       depends on HAVE_IDE
        depends on BLOCK
-       depends on HAS_IOMEM
        ---help---
          If you say Y here, your kernel will be able to manage low cost mass
          storage units such as ATA/(E)IDE and ATAPI units. The most common
@@ -206,9 +210,17 @@ config BLK_DEV_IDECD
          To compile this driver as a module, choose M here: the
          module will be called ide-cd.
 
+config BLK_DEV_IDECD_VERBOSE_ERRORS
+       bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
+       depends on BLK_DEV_IDECD
+       default y
+       help
+         Turn this on to have the driver print out the meanings of the
+         ATAPI error codes.  This will use up additional 8kB of kernel-space
+         memory, though.
+
 config BLK_DEV_IDETAPE
-       tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
+       tristate "Include IDE/ATAPI TAPE support"
        help
          If you have an IDE tape drive using the ATAPI protocol, say Y.
          ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
@@ -366,6 +378,9 @@ config BLK_DEV_IDEPNP
          would like the kernel to automatically detect and activate
          it, say Y here.
 
+config BLK_DEV_IDEDMA_SFF
+       bool
+
 if PCI
 
 comment "PCI IDE chipsets support"
@@ -447,6 +462,7 @@ config BLK_DEV_RZ1000
 config BLK_DEV_IDEDMA_PCI
        bool
        select BLK_DEV_IDEPCI
+       select BLK_DEV_IDEDMA_SFF
 
 config BLK_DEV_AEC62XX
        tristate "AEC62XX chipset support"
@@ -676,23 +692,6 @@ config BLK_DEV_PDC202XX_OLD
 
          If unsure, say N.
 
-config PDC202XX_BURST
-       bool "Special UDMA Feature"
-       depends on BLK_DEV_PDC202XX_OLD
-       help
-         This option causes the pdc202xx driver to enable UDMA modes on the
-         PDC202xx even when the PDC202xx BIOS has not done so.
-
-         It was originally designed for the PDC20246/Ultra33, whose BIOS will
-         only setup UDMA on the first two PDC20246 cards.  It has also been
-         used successfully on a PDC20265/Ultra100, allowing use of UDMA modes
-         when the PDC20265 BIOS has been disabled (for faster boot up).
-
-         Please read the comments at the top of
-         <file:drivers/ide/pci/pdc202xx_old.c>.
-
-         If unsure, say N.
-
 config BLK_DEV_PDC202XX_NEW
        tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
        select BLK_DEV_IDEDMA_PCI
@@ -1001,6 +1000,15 @@ config BLK_DEV_Q40IDE
          normally be on; disable it only if you are running a custom hard
          drive subsystem through an expansion card.
 
+config BLK_DEV_PALMCHIP_BK3710
+       tristate "Palmchip bk3710 IDE controller support"
+       depends on ARCH_DAVINCI
+       select BLK_DEV_IDEDMA_SFF
+       help
+         Say Y here if you want to support the onchip IDE controller on the
+         TI DaVinci SoC
+
+
 config BLK_DEV_MPC8xx_IDE
        tristate "MPC8xx IDE support"
        depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
@@ -1103,7 +1111,8 @@ config BLK_DEV_UMC8672
 endif
 
 config BLK_DEV_IDEDMA
-       def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+       def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+                BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 
 config IDE_ARCH_OBSOLETE_INIT
        def_bool ALPHA || (ARM && !ARCH_L7200) || BLACKFIN || X86 || IA64 || M32R || MIPS || PARISC || PPC || (SUPERH64 && BLK_DEV_IDEPCI) || SPARC