drivers/serial/: Spelling fixes

[linux-2.6] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ae38e..4fa7927 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -62,11 +62,11 @@ config SERIAL_8250_CONSOLE
          kernel will automatically use the first serial line, /dev/ttyS0, as
          system console.
 
-         you can set that using a kernel command line option such as
+         You can set that using a kernel command line option such as
          "console=uart8250,io,0x3f8,9600n8"
          "console=uart8250,mmio,0xff5e0000,115200n8".
-         and it will switch to normal serial console when correponding port is
-         ready.
+         and it will switch to normal serial console when the corresponding 
+         port is ready.
          "earlycon=uart8250,io,0x3f8,9600n8"
          "earlycon=uart8250,mmio,0xff5e0000,115200n8".
          it will not only setup early console.
@@ -600,7 +600,7 @@ config SERIAL_SA1100_CONSOLE
 
 config SERIAL_BFIN
        tristate "Blackfin serial port support"
-       depends on BFIN
+       depends on BLACKFIN
        select SERIAL_CORE
        select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
        help
@@ -624,7 +624,7 @@ choice
 
 config SERIAL_BFIN_DMA
        bool "DMA mode"
-       depends on DMA_UNCACHED_1M && !KGDB_UART
+       depends on !DMA_UNCACHED_NONE && !KGDB_UART
        help
          This driver works under DMA mode. If this option is selected, the
          blackfin simple dma driver is also enabled.
@@ -960,6 +960,30 @@ config SERIAL_COLDFIRE
          This driver supports the built-in serial ports of the Motorola ColdFire
          family of CPUs.
 
+config SERIAL_MCF
+       bool "Coldfire serial support (new style driver)"
+       depends on COLDFIRE
+       select SERIAL_CORE
+       help
+         This new serial driver supports the Freescale Coldfire serial ports
+         using the new serial driver subsystem.
+
+config SERIAL_MCF_BAUDRATE
+       int "Default baudrate for Coldfire serial ports"
+       depends on SERIAL_MCF
+       default 19200
+       help
+         This setting lets you define what the default baudrate is for the
+         ColdFire serial ports. The usual default varies from board to board,
+         and this setting is a way of catering for that.
+
+config SERIAL_MCF_CONSOLE
+       bool "Coldfire serial console support"
+       depends on SERIAL_MCF
+       select SERIAL_CORE_CONSOLE
+       help
+         Enable a ColdFire internal serial port to be the system console.
+
 config SERIAL_68360_SMC
        bool "68360 SMC uart support"
        depends on M68360
@@ -1271,8 +1295,8 @@ config SERIAL_NETX_CONSOLE
        depends on SERIAL_NETX
        select SERIAL_CORE_CONSOLE
        help
-         If you have enabled the serial port on the Motorola IMX
-         CPU you can make it the console by answering Y to this option.
+         If you have enabled the serial port on the Hilscher NetX SoC
+         you can make it the console by answering Y to this option.
 
 config SERIAL_OF_PLATFORM
        tristate "Serial port on Open Firmware platform bus"
@@ -1284,4 +1308,14 @@ config SERIAL_OF_PLATFORM
          Currently, only 8250 compatible ports are supported, but
          others can easily be added.
 
+config SERIAL_QE
+       tristate "Freescale QUICC Engine serial port support"
+       depends on QUICC_ENGINE
+       select SERIAL_CORE
+       select FW_LOADER
+       default n
+       help
+         This driver supports the QE serial ports on Freescale embedded
+         PowerPC that contain a QUICC Engine.
+
 endmenu