/* linux/drivers/mtd/nand/bf5xx_nand.c
*
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2008 Analog Devices Inc.
* http://blackfin.uclinux.org/
* Bryan Wu <bryan.wu@analog.com>
*
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
*
* Derived from drivers/mtd/nand/s3c2410.c
* Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
static int hardware_ecc;
#endif
-static unsigned short bfin_nfc_pin_req[] = {P_NAND_CE, P_NAND_RB, 0};
+static const unsigned short bfin_nfc_pin_req[] =
+ {P_NAND_CE,
+ P_NAND_RB,
+ P_NAND_D0,
+ P_NAND_D1,
+ P_NAND_D2,
+ P_NAND_D3,
+ P_NAND_D4,
+ P_NAND_D5,
+ P_NAND_D6,
+ P_NAND_D7,
+ P_NAND_WE,
+ P_NAND_RE,
+ P_NAND_CLE,
+ P_NAND_ALE,
+ 0};
/*
* Data structures for bf5xx nand flash controller driver
u16 ecc0, ecc1;
u32 code[2];
u8 *p;
- int bytes = 3, i;
/* first 4 bytes ECC code for 256 page size */
ecc0 = bfin_read_NFC_ECC0();
dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
+ /* first 3 bytes in ecc_code for 256 page size */
+ p = (u8 *) code;
+ memcpy(ecc_code, p, 3);
+
/* second 4 bytes ECC code for 512 page size */
if (page_size == 512) {
ecc0 = bfin_read_NFC_ECC2();
ecc1 = bfin_read_NFC_ECC3();
code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
- bytes = 6;
+
+ /* second 3 bytes in ecc_code for second 256
+ * bytes of 512 page size
+ */
+ p = (u8 *) (code + 1);
+ memcpy((ecc_code + 3), p, 3);
dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]);
}
- p = (u8 *)code;
- for (i = 0; i < bytes; i++)
- ecc_code[i] = p[i];
-
return 0;
}
init_completion(&info->dma_completion);
+#ifdef CONFIG_BF54x
/* Setup DMAC1 channel mux for NFC which shared with SDH */
val = bfin_read_DMAC1_PERIMUX();
val &= 0xFFFE;
bfin_write_DMAC1_PERIMUX(val);
SSYNC();
-
+#endif
/* Request NFC DMA channel */
ret = request_dma(CH_NFC, "BF5XX NFC driver");
if (ret < 0) {
bfin_write_NFC_IRQSTAT(val);
SSYNC();
- if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
- printk(KERN_ERR DRV_NAME
- ": Requesting Peripherals failed\n");
- return -EFAULT;
- }
-
/* DMA initialization */
if (bf5xx_nand_dma_init(info))
err = -ENXIO;
dev_dbg(&pdev->dev, "(%p)\n", pdev);
+ if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME
+ ": Requesting Peripherals failed\n");
+ return -EFAULT;
+ }
+
if (!plat) {
dev_err(&pdev->dev, "no platform specific information\n");
goto exit_error;
{
struct bf5xx_nand_info *info = platform_get_drvdata(dev);
- if (info)
- bf5xx_nand_hw_init(info);
-
return 0;
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:" DRV_NAME);