powerpc/44x: Support for 256KB PAGE_SIZE
authorYuri Tikhonov <yur@emcraft.com>
Thu, 29 Jan 2009 01:40:44 +0000 (01:40 +0000)
committerJosh Boyer <jwboyer@linux.vnet.ibm.com>
Sat, 14 Feb 2009 19:40:04 +0000 (14:40 -0500)
commite12401222f749c37277a313d631dc024bbfd3b00
tree5e02daa9f2c16965a2399a5b7189ddd0753f0fb1
parent6071ed0487c6ea8dcfadd9844b9b90944cd9de1e
powerpc/44x: Support for 256KB PAGE_SIZE

This patch adds support for 256KB pages on ppc44x-based boards.

For simplification of implementation with 256KB pages we still assume
2-level paging. As a side effect this leads to wasting extra memory space
reserved for PTE tables: only 1/4 of pages allocated for PTEs are
actually used. But this may be an acceptable trade-off to achieve the
high performance we have with big PAGE_SIZEs in some applications (e.g.
RAID).

Also with 256KB PAGE_SIZE we increase THREAD_SIZE up to 32KB to minimize
the risk of stack overflows in the cases of on-stack arrays, which size
depends on the page size (e.g. multipage BIOs, NTFS, etc.).

With 256KB PAGE_SIZE we need to decrease the PKMAP_ORDER at least down
to 9, otherwise all high memory (2 ^ 10 * PAGE_SIZE == 256MB) we'll be
occupied by PKMAP addresses leaving no place for vmalloc. We do not
separate PKMAP_ORDER for 256K from 16K/64K PAGE_SIZE here; actually that
value of 10 in support for 16K/64K had been selected rather intuitively.
Thus now for all cases of PAGE_SIZE on ppc44x (including the default, 4KB,
one) we have 512 pages for PKMAP.

Because ELF standard supports only page sizes up to 64K, then you should
use binutils later than 2.17.50.0.3 with '-zmax-page-size' set to 256K
for building applications, which are to be run with the 256KB-page sized
kernel. If using the older binutils, then you should patch them like follows:

--- binutils/bfd/elf32-ppc.c.orig
+++ binutils/bfd/elf32-ppc.c

-#define ELF_MAXPAGESIZE                0x10000
+#define ELF_MAXPAGESIZE                0x40000

One more restriction we currently have with 256KB page sizes is inability
to use shmem safely, so, for now, the 256KB is available only if you turn
the CONFIG_SHMEM option off (another variant is to use BROKEN).
Though, if you need shmem with 256KB pages, you can always remove the !SHMEM
dependency in 'config PPC_256K_PAGES', and use the workaround available here:
 http://lkml.org/lkml/2008/12/19/20

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
arch/powerpc/Kconfig
arch/powerpc/include/asm/highmem.h
arch/powerpc/include/asm/mmu-44x.h
arch/powerpc/include/asm/page.h
arch/powerpc/include/asm/page_32.h
arch/powerpc/include/asm/thread_info.h
arch/powerpc/kernel/head_booke.h