linux-2.6
15 years agonilfs2: fix problems of memory allocation in ioctl
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:43 +0000 (19:01 -0700)] 
nilfs2: fix problems of memory allocation in ioctl

This is another patch for fixing the following problems of a memory
copy function in nilfs2 ioctl:

(1) It tries to allocate 128KB size of memory even for small objects.

(2) Though the function repeatedly tries large memory allocations
    while reducing the size, GFP_NOWAIT flag is not specified.
    This increases the possibility of system memory shortage.

(3) During the retries of (2), verbose warnings are printed
    because _GFP_NOWARN flag is not used for the kmalloc calls.

The first patch was still doing large allocations by kmalloc which are
repeatedly tried while reducing the size.

Andi Kleen told me that using copy_from_user for large memory is not
good from the viewpoint of preempt latency:

 On Fri, 12 Dec 2008 21:24:11 +0100, Andi Kleen <andi@firstfloor.org> wrote:
 > > In the current interface, each data item is copied twice: one is to
 > > the allocated memory from user space (via copy_from_user), and another
 >
 > For such large copies it is better to use multiple smaller (e.g. 4K)
 > copy user, that gives better real time preempt latencies. Each cfu has a
 > cond_resched(), but only one, not multiple times in the inner loop.

He also advised me that:

 On Sun, 14 Dec 2008 16:13:27 +0100, Andi Kleen <andi@firstfloor.org> wrote:
 > Better would be if you could go to PAGE_SIZE. order 0 allocations
 > are typically the fastest / least likely to stall.
 >
 > Also in this case it's a good idea to use __get_free_pages()
 > directly, kmalloc tends to be become less efficient at larger
 > sizes.

For the function in question, the size of buffer memory can be reduced
since the buffer is repeatedly used for a number of small objects.  On
the other hand, it may incur large preempt latencies for larger buffer
because a copy_from_user (and a copy_to_user) was applied only once
each cycle.

With that, this revision uses the order 0 allocations with
__get_free_pages() to fix the original problems.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: update makefile and Kconfig
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:41 +0000 (19:01 -0700)] 
nilfs2: update makefile and Kconfig

This adds a Makefile for the nilfs2 file system, and updates the
makefile and Kconfig file in the file system directory.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: ioctl operations
Koji Sato [Tue, 7 Apr 2009 02:01:41 +0000 (19:01 -0700)] 
nilfs2: ioctl operations

This adds userland interface implemented with ioctl.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: block cache for garbage collection
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:40 +0000 (19:01 -0700)] 
nilfs2: block cache for garbage collection

This adds the cache of on-disk blocks to be moved in garbage
collection.  The disk blocks are held with dummy inodes (called
gcinodes), and this file provides lookup function of the dummy inodes,
and their buffer read function.

Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: another dat for garbage collection
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:39 +0000 (19:01 -0700)] 
nilfs2: another dat for garbage collection

NILFS2 uses another DAT inode during garbage collection to ensure
atomicity and consistency of the DAT in the transient state.  This
twin inode is called GCDAT.

This adds functions to initialize the GCDAT and to switch page caches
and B-tree node caches between these two inodes.

Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: recovery functions
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:38 +0000 (19:01 -0700)] 
nilfs2: recovery functions

This adds recovery function on mount.

Usually the recovery is achieved by just finding the latest super
root.  When logs without checkpoints were appended for data sync
operations after the latest super root, the recovery function will
perform roll forwarding and reconstruct new log(s) with a super root.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: fix missed-sync issue for do_sync_mapping_range()
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:38 +0000 (19:01 -0700)] 
nilfs2: fix missed-sync issue for do_sync_mapping_range()

Chris Mason pointed out that there is a missed sync issue in
nilfs_writepages():

On Wed, 17 Dec 2008 21:52:55 -0500, Chris Mason wrote:
> It looks like nilfs_writepage ignores WB_SYNC_NONE, which is used by
> do_sync_mapping_range().

where WB_SYNC_NONE in do_sync_mapping_range() was replaced with
WB_SYNC_ALL by Nick's patch (commit:
ee53a891f47444c53318b98dac947ede963db400).

This fixes the problem by letting nilfs_writepages() write out the log of
file data within the range if sync_mode is WB_SYNC_ALL.

This involves removal of nilfs_file_aio_write() which was previously
needed to ensure O_SYNC sync writes.

Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: segment constructor
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:37 +0000 (19:01 -0700)] 
nilfs2: segment constructor

This adds the segment constructor (also called log writer).

The segment constructor collects dirty buffers for every dirty inode,
makes summaries of the buffers, assigns disk block addresses to the
buffers, and then submits BIOs for the buffers.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: segment buffer
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:36 +0000 (19:01 -0700)] 
nilfs2: segment buffer

This adds the segment buffer which is used to constuct logs.

[akpm@linux-foundation.org: BIO_RW_SYNC got removed]
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: super block operations
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:35 +0000 (19:01 -0700)] 
nilfs2: super block operations

This adds super block operations for the nilfs2 file system.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: operations for the_nilfs core object
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:35 +0000 (19:01 -0700)] 
nilfs2: operations for the_nilfs core object

This adds functions on the_nilfs object, which keeps shared resources and
states among a read/write mount and snapshots mounts going individually.

the_nilfs is allocated per block device; it is created when user first
mount a snapshot or a read/write mount on the device, then it is reused
for successive mounts.  It will be freed when all mount instances on the
device are detached.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: pathname operations
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:34 +0000 (19:01 -0700)] 
nilfs2: pathname operations

This adds pathname operations, most of which comes from the ext2 file
system.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: directory entry operations
Yoshiji Amagai [Tue, 7 Apr 2009 02:01:34 +0000 (19:01 -0700)] 
nilfs2: directory entry operations

This adds directory handling functions, most of which comes from the ext2
file system.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: file operations
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:33 +0000 (19:01 -0700)] 
nilfs2: file operations

This adds primitives for regular file handling.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: inode operations
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:32 +0000 (19:01 -0700)] 
nilfs2: inode operations

This adds inode level operations of the nilfs2 file system.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: segment usage file
Koji Sato [Tue, 7 Apr 2009 02:01:32 +0000 (19:01 -0700)] 
nilfs2: segment usage file

This adds a meta data file which stores the allocation state of segments.

[konishi.ryusuke@lab.ntt.co.jp: fix wrong counting of checkpoints and dirty segments]
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: checkpoint file
Koji Sato [Tue, 7 Apr 2009 02:01:31 +0000 (19:01 -0700)] 
nilfs2: checkpoint file

This adds a meta data file which holds checkpoint entries in its data
blocks.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: inode map file
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:30 +0000 (19:01 -0700)] 
nilfs2: inode map file

This adds a meta data file which stores on-disk inodes in its data blocks.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: disk address translator
Koji Sato [Tue, 7 Apr 2009 02:01:30 +0000 (19:01 -0700)] 
nilfs2: disk address translator

This adds the disk address translation file (DAT) whose primary function
is to convert virtual disk block numbers to actual disk block numbers.

The virtual block numbers of NILFS are associated with checkpoint
generation numbers, and this file also provides functions to manage the
lifetime information of each virtual block number.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: persistent object allocator
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:29 +0000 (19:01 -0700)] 
nilfs2: persistent object allocator

This adds common functions to allocate or deallocate entries with bitmaps
on a meta data file.  This feature is used by the DAT and ifile.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: meta data file
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:28 +0000 (19:01 -0700)] 
nilfs2: meta data file

This adds the meta data file, which serves common buffer functions to the
DAT, sufile, cpfile, ifile, and so forth.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: buffer and page operations
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:27 +0000 (19:01 -0700)] 
nilfs2: buffer and page operations

This adds common routines for buffer/page operations used in B-tree
node caches, meta data files, or segment constructor (log writer).

NILFS uses copy functions for buffers and pages due to the following
reasons:

 1) Relocation required for COW
    Since NILFS changes address of on-disk blocks, moving buffers
    in page cache is needed for the buffers which are not addressed
    by a file offset.  If buffer size is smaller than page size,
    this involves partial copy of pages.

 2) Freezing mmapped pages
    NILFS calculates checksums for each log to ensure its validity.
    If page data changes after the checksum calculation, this validity
    check will not work correctly.  To avoid this failure for mmaped
    pages, NILFS freezes their data by copying.

 3) Copy-on-write for DAT pages
    NILFS makes clones of DAT page caches in a copy-on-write manner
    during GC processes, and this ensures atomicity and consistency
    of the DAT in the transient state.

In addition, NILFS uses two obsolete functions, nilfs_mark_buffer_dirty()
and nilfs_clear_page_dirty() respectively.

* nilfs_mark_buffer_dirty() was required to avoid NULL pointer
  dereference faults:

  Since the page cache of B-tree node pages or data page cache of pseudo
  inodes does not have a valid mapping->host, calling mark_buffer_dirty()
  for their buffers causes the fault; it calls __mark_inode_dirty(NULL)
  through __set_page_dirty().

* nilfs_clear_page_dirty() was needed in the two cases:

 1) For B-tree node pages and data pages of the dat/gcdat, NILFS2 clears
    page dirty flags when it copies back pages from the cloned cache
    (gcdat->{i_mapping,i_btnode_cache}) to its original cache
    (dat->{i_mapping,i_btnode_cache}).

 2) Some B-tree operations like insertion or deletion may dispose buffers
    in dirty state, and this needs to cancel the dirty state of their
    pages.  clear_page_dirty_for_io() caused faults because it does not
    clear the dirty tag on the page cache.

Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: B-tree node cache
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:25 +0000 (19:01 -0700)] 
nilfs2: B-tree node cache

This adds routines for B-tree node buffers.

Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: direct block mapping
Koji Sato [Tue, 7 Apr 2009 02:01:25 +0000 (19:01 -0700)] 
nilfs2: direct block mapping

This adds block mappings using direct pointers which are stored in the
i_bmap array of inode.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: B-tree based block mapping
Koji Sato [Tue, 7 Apr 2009 02:01:24 +0000 (19:01 -0700)] 
nilfs2: B-tree based block mapping

This adds declarations and functions of NILFS2 B-tree.

Two variants are integrated in the NILFS2 B-tree.  The B-tree for the most
files points to the child nodes or data blocks with virtual block
addresses, whereas the B-tree of the DAT uses actual block addresses.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: integrated block mapping
Koji Sato [Tue, 7 Apr 2009 02:01:23 +0000 (19:01 -0700)] 
nilfs2: integrated block mapping

This adds structures and operations for the block mapping (bmap for
short).  NILFS2 uses direct mappings for short files or B-tree based
mappings for longer files.

Every on-disk data block is held with inodes and managed through this
block mapping.  The nilfs_bmap structure and a set of functions here
provide this capability to the NILFS2 inode.

[penberg@cs.helsinki.fi: remove a bunch of bmap wrapper macros]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: add inode and other major structures
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:23 +0000 (19:01 -0700)] 
nilfs2: add inode and other major structures

This adds the following common structures of the NILFS2 file system.

* nilfs_inode_info structure:
  gives on-memory inode.

* nilfs_sb_info structure:
  keeps per-mount state and a special inode for the ifile.
  This structure is attached to the super_block structure.

* the_nilfs structure:
  keeps shared state and locks among a read/write mount and snapshot
  mounts.  This keeps special inodes for the sufile, cpfile, dat, and
  another dat inode used during GC (gcdat).  This also has a hash table
  of dummy inodes to cache disk blocks during GC (gcinodes).

* nilfs_transaction_info structure:
  keeps per task state while nilfs is writing logs or doing indivisible
  inode or namespace operations.  This structure is used to identify
  context during log making and store nest level of the lock which
  ensures atomicity of file system operations.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: disk format and userland interface
Koji Sato [Tue, 7 Apr 2009 02:01:21 +0000 (19:01 -0700)] 
nilfs2: disk format and userland interface

This adds a header file which specifies the on-disk format and ioctl
interface of the nilfs2 file system.

Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonilfs2: add document
Ryusuke Konishi [Tue, 7 Apr 2009 02:01:20 +0000 (19:01 -0700)] 
nilfs2: add document

This adds a document describing the features, mount options, userland
tools, usage, disk format, and related URLs for the nilfs2 file system.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: update the old macro DMA_nBIT_MASK related documentations
Yang Hongyang [Tue, 7 Apr 2009 02:01:19 +0000 (19:01 -0700)] 
dma-mapping: update the old macro DMA_nBIT_MASK related documentations

Update the old macro DMA_nBIT_MASK related documentations

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24)
Yang Hongyang [Tue, 7 Apr 2009 02:01:18 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24)

Replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)
Yang Hongyang [Tue, 7 Apr 2009 02:01:17 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)

Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)
Yang Hongyang [Tue, 7 Apr 2009 02:01:17 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)

Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)
Yang Hongyang [Tue, 7 Apr 2009 02:01:16 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)

Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Yang Hongyang [Tue, 7 Apr 2009 02:01:15 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39)
Yang Hongyang [Tue, 7 Apr 2009 02:01:15 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39)

Replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40)
Yang Hongyang [Tue, 7 Apr 2009 02:01:14 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40)

Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_48BIT_MASK macro with DMA_BIT_MASK(48)
Yang Hongyang [Tue, 7 Apr 2009 02:01:13 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_48BIT_MASK macro with DMA_BIT_MASK(48)

Replace all DMA_48BIT_MASK macro with DMA_BIT_MASK(48)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Yang Hongyang [Tue, 7 Apr 2009 02:01:13 +0000 (19:01 -0700)] 
dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agofs/romfs: return f_fsid for statfs(2)
Coly Li [Tue, 7 Apr 2009 02:01:12 +0000 (19:01 -0700)] 
fs/romfs: return f_fsid for statfs(2)

Make romfs return f_fsid info for statfs(2).

Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonamespaces: mqueue namespace: adapt sysctl
Serge E. Hallyn [Tue, 7 Apr 2009 02:01:11 +0000 (19:01 -0700)] 
namespaces: mqueue namespace: adapt sysctl

Largely inspired from ipc/ipc_sysctl.c.  This patch isolates the mqueue
sysctl stuff in its own file.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonamespaces: ipc namespaces: implement support for posix msqueues
Serge E. Hallyn [Tue, 7 Apr 2009 02:01:10 +0000 (19:01 -0700)] 
namespaces: ipc namespaces: implement support for posix msqueues

Implement multiple mounts of the mqueue file system, and link it to usage
of CLONE_NEWIPC.

Each ipc ns has a corresponding mqueuefs superblock.  When a user does
clone(CLONE_NEWIPC) or unshare(CLONE_NEWIPC), the unshare will cause an
internal mount of a new mqueuefs sb linked to the new ipc ns.

When a user does 'mount -t mqueue mqueue /dev/mqueue', he mounts the
mqueuefs superblock.

Posix message queues can be worked with both through the mq_* system calls
(see mq_overview(7)), and through the VFS through the mqueue mount.  Any
usage of mq_open() and friends will work with the acting task's ipc
namespace.  Any actions through the VFS will work with the mqueuefs in
which the file was created.  So if a user doesn't remount mqueuefs after
unshare(CLONE_NEWIPC), mq_open("/ab") will not be reflected in "ls
/dev/mqueue".

If task a mounts mqueue for ipc_ns:1, then clones task b with a new ipcns,
ipcns:2, and then task a is the last task in ipc_ns:1 to exit, then (1)
ipc_ns:1 will be freed, (2) it's superblock will live on until task b
umounts the corresponding mqueuefs, and vfs actions will continue to
succeed, but (3) sb->s_fs_info will be NULL for the sb corresponding to
the deceased ipc_ns:1.

To make this happen, we must protect the ipc reference count when

a) a task exits and drops its ipcns->count, since it might be dropping
   it to 0 and freeing the ipcns

b) a task accesses the ipcns through its mqueuefs interface, since it
   bumps the ipcns refcount and might race with the last task in the ipcns
   exiting.

So the kref is changed to an atomic_t so we can use
atomic_dec_and_lock(&ns->count,mq_lock), and every access to the ipcns
through ns = mqueuefs_sb->s_fs_info is protected by the same lock.

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonamespaces: mqueue ns: move mqueue_mnt into struct ipc_namespace
Serge E. Hallyn [Tue, 7 Apr 2009 02:01:08 +0000 (19:01 -0700)] 
namespaces: mqueue ns: move mqueue_mnt into struct ipc_namespace

Move mqueue vfsmount plus a few tunables into the ipc_namespace struct.
The CONFIG_IPC_NS boolean and the ipc_namespace struct will serve both the
posix message queue namespaces and the SYSV ipc namespaces.

The sysctl code will be fixed separately in patch 3.  After just this
patch, making a change to posix mqueue tunables always changes the values
in the initial ipc namespace.

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonamespaces: move proc_net_get_sb to a generic fs/super.c helper
Serge E. Hallyn [Tue, 7 Apr 2009 02:01:07 +0000 (19:01 -0700)] 
namespaces: move proc_net_get_sb to a generic fs/super.c helper

The mqueuefs filesystem will use this helper as well.  Proc's main get_sb
could also be made to use it, but that will require a bit more rework.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agouvesafb: documentation update
Michal Januszewski [Tue, 7 Apr 2009 02:01:06 +0000 (19:01 -0700)] 
uvesafb: documentation update

Update the uvesafb documentation to accurately reflect the default options
used by the driver.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agofbdev: i.MX31: fix panning, error handling, clean up
Guennadi Liakhovetski [Tue, 7 Apr 2009 02:01:05 +0000 (19:01 -0700)] 
fbdev: i.MX31: fix panning, error handling, clean up

1. check for errors returned from clk_get()
2. fix "Unbalanced enable for IRQ 160"
3. fix transmit descriptor handling in panning
4. clean frame buffer on blank - useful for OLED displays
5. formatting clean up

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotdfxfb: make use of DDC information about connected monitor
Krzysztof Helt [Tue, 7 Apr 2009 02:01:04 +0000 (19:01 -0700)] 
tdfxfb: make use of DDC information about connected monitor

Read DDC information from a connected monitor and use it to select initial
mode (if the mode is not specified).

Also, use the information to protect against modes outside the monitor
specs.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotdfxfb: move I2C functionality into the tdfxfb
Krzysztof Helt [Tue, 7 Apr 2009 02:01:03 +0000 (19:01 -0700)] 
tdfxfb: move I2C functionality into the tdfxfb

The I2C functionality provided by the i2c-voodoo3 driver is moved into the
tdfxfb (frame buffer driver for Voodoo3 cards).  This way there is no
conflict between the i2c driver and the fb driver.

The tdfxfb does not make use from the DDC functionality yet but provides
all the functionality of the i2c-voodoo3 driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokprobes: support kretprobe and jprobe per-probe disabling
Masami Hiramatsu [Tue, 7 Apr 2009 02:01:02 +0000 (19:01 -0700)] 
kprobes: support kretprobe and jprobe per-probe disabling

Add disable/enable_kretprobe() and disable/enable_jprobe().

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokprobes: support per-kprobe disabling
Masami Hiramatsu [Tue, 7 Apr 2009 02:01:02 +0000 (19:01 -0700)] 
kprobes: support per-kprobe disabling

Add disable_kprobe() and enable_kprobe() to disable/enable kprobes
temporarily.

disable_kprobe() asynchronously disables probe handlers of specified
kprobe.  So, after calling it, some handlers can be called at a while.
enable_kprobe() enables specified kprobe.

aggr_pre_handler and aggr_post_handler check disabled probes.  On the
other hand aggr_break_handler and aggr_fault_handler don't check it
because these handlers will be called while executing pre or post handlers
and usually those help error handling.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokprobes: rename kprobe_enabled to kprobes_all_disarmed
Masami Hiramatsu [Tue, 7 Apr 2009 02:01:01 +0000 (19:01 -0700)] 
kprobes: rename kprobe_enabled to kprobes_all_disarmed

Rename kprobe_enabled to kprobes_all_disarmed and invert logic due to
avoiding naming confusion from per-probe disabling.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokprobes: cleanup comment style in kprobes.h
Masami Hiramatsu [Tue, 7 Apr 2009 02:01:00 +0000 (19:01 -0700)] 
kprobes: cleanup comment style in kprobes.h

Fix comment style in kprobes.h.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokprobes: move EXPORT_SYMBOL_GPL just after function definitions
Masami Hiramatsu [Tue, 7 Apr 2009 02:00:59 +0000 (19:00 -0700)] 
kprobes: move EXPORT_SYMBOL_GPL just after function definitions

Clean up positions of EXPORT_SYMBOL_GPL in kernel/kprobes.c according to
checkpatch.pl.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokprobes: cleanup aggr_kprobe related code
Masami Hiramatsu [Tue, 7 Apr 2009 02:00:58 +0000 (19:00 -0700)] 
kprobes: cleanup aggr_kprobe related code

Currently, kprobes can disable all probes at once, but can't disable it
individually (not unregister, just disable an kprobe, because
unregistering needs to wait for scheduler synchronization).  These patches
introduce APIs for on-the-fly per-probe disabling and re-enabling by
dis-arming/re-arming its breakpoint instruction.

This patch:

Change old_p to ap in add_new_kprobe() for readability, copy flags member
in add_aggr_kprobe(), and simplify the code flow of
register_aggr_kprobe().

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agospi_imx: set spi_master.dma_alignment = 4
Mike Rapoport [Tue, 7 Apr 2009 02:00:57 +0000 (19:00 -0700)] 
spi_imx: set spi_master.dma_alignment = 4

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agopxa2xx_spi: set spi_master.dma_alignment = 8
Mike Rapoport [Tue, 7 Apr 2009 02:00:57 +0000 (19:00 -0700)] 
pxa2xx_spi: set spi_master.dma_alignment = 8

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoSPI: add dma_alignment field to spi_master
Mike Rapoport [Tue, 7 Apr 2009 02:00:56 +0000 (19:00 -0700)] 
SPI: add dma_alignment field to spi_master

Some SPI controllers have restrictions on DMAable buffers alignemt.
Currently if the buffer supplied by protocol driver is not properly
aligned, the controller silently performs transfer in PIO mode.  Addition
of dma_alignment field to spi_master allows protocol drivers to perform
proper alignment.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agospi_bfin5xx: remove unused IS_DMA_ALIGNED macro
Mike Rapoport [Tue, 7 Apr 2009 02:00:55 +0000 (19:00 -0700)] 
spi_bfin5xx: remove unused IS_DMA_ALIGNED macro

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agospi: pxa2xx_spi: introduce chipselect GPIO to simplify the common cases
Eric Miao [Tue, 7 Apr 2009 02:00:54 +0000 (19:00 -0700)] 
spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common cases

Most SPI peripherals use GPIOs as their chip selects, introduce .gpio_cs
for this.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agospi: limit reaches -1, tested 0
Roel Kluin [Tue, 7 Apr 2009 02:00:54 +0000 (19:00 -0700)] 
spi: limit reaches -1, tested 0

With a postfix decrement limit will reach -1 rather than 0, so the warning
will not be issued.

Also, add a cpu_relax() into the busy-wait loop.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Mariusz Ceier <mceier@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: Make mmc_spi driver work on Blackfin
Wolfgang Muees [Tue, 7 Apr 2009 02:00:53 +0000 (19:00 -0700)] 
Blackfin SPI Driver: Make mmc_spi driver work on Blackfin

1. Rewrite of the non-dma data transfer functions to use only ONE mode
   of TIMOD (TIMOD=0x1).  With TIMOD=0, it was not possible to set the TX
   bit pattern.  So the TDBR = 0xFFFF inside the read calls won't work.

2. Clear SPI_RDBR before reading and before duplex transfer.
   Otherwise the garbage data in RDBR will get read.  Since mmc_spi uses a
   lot of duplex transfers, this is the main cause of mmc_spi failure.

3. Poll RXS for transfer completion.  Polling SPIF or TXS cannot
   guarantee transfer completion.  This may interrupt a transfer before it
   is finished.  Also this may leave garbage data in buffer and affect
   next transfer.

[Yi Li <yi.li@analog.com>: add a field "u16 idle_tx_val" in "struct
bfin5xx_spi_chip" to specify the value to transmit if no TX value
is supplied.]
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: Add GPIO controlled SPI Slave Select support
Michael Hennerich [Tue, 7 Apr 2009 02:00:51 +0000 (19:00 -0700)] 
Blackfin SPI Driver: Add GPIO controlled SPI Slave Select support

Add support for GPIO controlled SPI Chip Selects.  To make use of this
feature, set chip_select = 0 and add a proper cs_gpio to your
controller_data.

struct spi_board_info
        .chip_select = 0

struct bfin5xx_spi_chip
        .cs_gpio = GPIO_P###

There are various SPI devices that require SPI MODE_0, and need to have
the Chip Selects asserted during the entire transfer.  Consider using
SPI_MODE_3 (SPI_CPHA | SPI_CPOL) if your device allows it.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: fix NULL pointer crash
Mike Frysinger [Tue, 7 Apr 2009 02:00:51 +0000 (19:00 -0700)] 
Blackfin SPI Driver: fix NULL pointer crash

Fix NULL pointer crash when cleaning up from invalid platform resources

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: use bfin_spi_ prefix on all functions
Mike Frysinger [Tue, 7 Apr 2009 02:00:50 +0000 (19:00 -0700)] 
Blackfin SPI Driver: use bfin_spi_ prefix on all functions

Do this because when things crash, we get simple names like "setup" and
"start_queue" which is pretty difficult to trace back to the real thing:
the spi driver

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: fix bug - correct usage of struct spi_transfer.cs_change
Yi Li [Tue, 7 Apr 2009 02:00:49 +0000 (19:00 -0700)] 
Blackfin SPI Driver: fix bug - correct usage of struct spi_transfer.cs_change

According to comments in linux/spi/spi.h:

 * All SPI transfers start with the relevant chipselect active.  Normally
 * it stays selected until after the last transfer in a message. Drivers
 * can affect the chipselect signal using cs_change.
 *
 * (i) If the transfer isn't the last one in the message, this flag is
 * used to make the chipselect briefly go inactive in the middle of the
 * message.  Toggling chipselect in this way may be needed to terminate
 * a chip command, letting a single spi_message perform all of group of
 * chip transactions together.
 *
 * (ii) When the transfer is the last one in the message, the chip may
 * stay selected until the next transfer.  On multi-device SPI busses
 * with nothing blocking messages going to other devices, this is just
 * a performance hint; starting a message to another device deselects
 * this one.  But in other cases, this can be used to ensure correctness.
 * Some devices need protocol transactions to be built from a series of
 * spi_message submissions, where the content of one message is determined
 * by the results of previous messages and where the whole transaction
 * ends when the chipselect goes intactive.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: fix bug - spi controller driver does not assert/deassert CS...
Yi Li [Tue, 7 Apr 2009 02:00:44 +0000 (19:00 -0700)] 
Blackfin SPI Driver: fix bug - spi controller driver does not assert/deassert CS correctly

This bug can be observed when two SPI devices are sharing the spi bus: One
device is set as SPI CS 7, another one is using SPI CS 4.

In spi_bfin5xx.c: cs_active(), cs_deactive() are used to control SPI_FLG
register.  From the debug bellow:

cs_active: flag: 0x7f91, chip->flag: 0x7f80, cs: 7
cs_active: flag: 0xef91, chip->flag: 0xef10, cs: 4

When device A (cs_7) activate CS 7, SPI_FLG is set as 0x7f91 (however,
SPI_FLG should be set as 0x7f80, or 0x6f91 if in broadcast mode).

Due to some HW bug (very possibly), if SPI_FLG is set as 0x7f91, SPISSEL7
is asserted, however SPISSEL4 will be asserted too (I can see this using
the scope).  This is unreasonable according to HRM.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: tweak magic spi dma sequence to get it working on BF54x
Mike Frysinger [Tue, 7 Apr 2009 02:00:43 +0000 (19:00 -0700)] 
Blackfin SPI Driver: tweak magic spi dma sequence to get it working on BF54x

Without this change, SPI DMA is not reliably under stress tests.
Obiviously it's a hardware issue which is not addressed by any document.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: add timeout while waiting for SPIF in dma irq handler
Mike Frysinger [Tue, 7 Apr 2009 02:00:42 +0000 (19:00 -0700)] 
Blackfin SPI Driver: add timeout while waiting for SPIF in dma irq handler

The "while" endless loop will cause the system hang if hardware error, so
we add timeout control to make the system alive.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: get dma working for SPI flashes
Mike Frysinger [Tue, 7 Apr 2009 02:00:41 +0000 (19:00 -0700)] 
Blackfin SPI Driver: get dma working for SPI flashes

When using a BF533-STAMP here with a W25X10 SPI flash.  It works fine when
enable_dma is disabled, but doesn't work at all when turning DMA on.  We
get just 0xff bytes back when trying to read the device.

Change the code around so that it programs the SPI first and then enables
DMA, it seems to work a lot better ...

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: SPI slave select code cleanup
Mike Frysinger [Tue, 7 Apr 2009 02:00:40 +0000 (19:00 -0700)] 
Blackfin SPI Driver: SPI slave select code cleanup

- remove duplicated definition MAX_SPI_SSEL

- remove unnecessary array size

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: use the properl BIT_CTL_xxx defines
Mike Frysinger [Tue, 7 Apr 2009 02:00:39 +0000 (19:00 -0700)] 
Blackfin SPI Driver: use the properl BIT_CTL_xxx defines

use the properl BIT_CTL_...  defines rather than the internal driv er
CFG_SPI_...  defines

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: do not check for SPI errors if DMA itself did not flag any
Mike Frysinger [Tue, 7 Apr 2009 02:00:38 +0000 (19:00 -0700)] 
Blackfin SPI Driver: do not check for SPI errors if DMA itself did not flag any

We only need to check SPI error when DMA failes, cause that is the DMA IRQ
handling routine.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: add a few more DMA debug messages
Mike Frysinger [Tue, 7 Apr 2009 02:00:38 +0000 (19:00 -0700)] 
Blackfin SPI Driver: add a few more DMA debug messages

Because of DMA hardware issue, we were trying to use software workaround.
This patch add some useful debug messages to help us debugging the DMA
code.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: drop bogus cast and touchup dma label
Mike Frysinger [Tue, 7 Apr 2009 02:00:37 +0000 (19:00 -0700)] 
Blackfin SPI Driver: drop bogus cast and touchup dma label

Blackfin's related DMA callback API doesn't need void * cast, so drop it.
And this driver is for all Blackfin processors not only for BF53x, we
update the DMA request label for more meaningful information.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: unify duplicated code in dma read/write paths
Mike Frysinger [Tue, 7 Apr 2009 02:00:36 +0000 (19:00 -0700)] 
Blackfin SPI Driver: unify duplicated code in dma read/write paths

For DMA TX/RX operation in pump_transfers, DMA contriguration code in TX
and RX paths are almost the same.  This patch unify the duplicated DMA
code to make it more readable.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: pass DMA overflow error to the higher level
Mike Frysinger [Tue, 7 Apr 2009 02:00:35 +0000 (19:00 -0700)] 
Blackfin SPI Driver: pass DMA overflow error to the higher level

If the SPI bus registers a receive overflow error, pass the result back up
to the higher levels.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: use len_in_bytes when we care about the number of bytes transferred
Mike Frysinger [Tue, 7 Apr 2009 02:00:34 +0000 (19:00 -0700)] 
Blackfin SPI Driver: use len_in_bytes when we care about the number of bytes transferred

Use len_in_bytes when we care about the number of bytes transferred rather
than the number of spi transactions.  (this value will be the same for
8bit transfers, but not any other sizes)

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: remove useless <asm/cplbinit.h>
Mike Frysinger [Tue, 7 Apr 2009 02:00:33 +0000 (19:00 -0700)] 
Blackfin SPI Driver: remove useless <asm/cplbinit.h>

We already moved bfin_addr_dcachable() and friends into the cacheflush
header where it belongs, so don't need to include <asm/cplbinit.h> here.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: Fix erroneous SPI Clock divisor calculation
Michael Hennerich [Tue, 7 Apr 2009 02:00:32 +0000 (19:00 -0700)] 
Blackfin SPI Driver: Fix erroneous SPI Clock divisor calculation

Fix erroneous SPI Clock divisor calculation.  Make sure SPI_BAUD is always
>= 2.  Writing a value of 0 or 1 to the SPI_BAUD register disables the
serial clock.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoBlackfin SPI Driver: ensure cache coherency before doing DMA
Vitja Makarov [Tue, 7 Apr 2009 02:00:31 +0000 (19:00 -0700)] 
Blackfin SPI Driver: ensure cache coherency before doing DMA

Flush or invalidate caches before doing DMA transfer, if needed.

[Mike Frysinger <vapier.adi@gmail.com>: add comment to address the
issue "Full duplex only works for non-DMA transfers".]
Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agohwmon: add support for GMT G760A fan speed PWM controller
Herbert Valerio Riedel [Tue, 7 Apr 2009 02:00:30 +0000 (19:00 -0700)] 
hwmon: add support for GMT G760A fan speed PWM controller

This controller can be found on the D-Link DNS-323 for instance, where
it is to be configured via static i2c_board_info in the board-specific
mach-orion/dns323-setup.c; this driver supports only the new-style
driver model.

Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Matthew Palmer <mpalmer@debian.org>
Signed-off-by: Laurie Bradshaw <bradshaw.laurie@googlemail.com>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years ago/proc/pid/maps: don't show pgoff of pure ANON VMAs
KAMEZAWA Hiroyuki [Tue, 7 Apr 2009 02:00:30 +0000 (19:00 -0700)] 
/proc/pid/maps: don't show pgoff of pure ANON VMAs

Recently, it's argued that what proc/pid/maps shows is ugly when a 32bit
binary runs on 64bit host.

/proc/pid/maps outputs vma's pgoff member but vma->pgoff is of no use
information is the vma is for ANON.  With this patch, /proc/pid/maps shows
just 0 if no file backing store.

[akpm@linux-foundation.org: coding-style fixes]
[kamezawa.hiroyu@jp.fujitsu.com: coding-style fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mike Waychison <mikew@google.com>
Reported-by: Ying Han <yinghan@google.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomm: add /proc controls for pdflush threads
Peter W Morreale [Tue, 7 Apr 2009 02:00:29 +0000 (19:00 -0700)] 
mm: add /proc controls for pdflush threads

Add /proc entries to give the admin the ability to control the minimum and
maximum number of pdflush threads.  This allows finer control of pdflush
on both large and small machines.

The rationale is simply one size does not fit all.  Admins on large and/or
small systems may want to tune the min/max pdflush thread count to best
suit their needs.  Right now the min/max is hardcoded to 2/8.  While
probably a fair estimate for smaller machines, large machines with large
numbers of CPUs and large numbers of filesystems/block devices may benefit
from larger numbers of threads working on different block devices.

Even if the background flushing algorithm is radically changed, it is
still likely that multiple threads will be involved and admins would still
desire finer control on the min/max other than to have to recompile the
kernel.

The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and
'/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions.

The minimum value for nr_pdflush_threads_min is 1 and the maximum value is
the current value of nr_pdflush_threads_max.  This minimum is required
since additional thread creation is performed in a pdflush thread itself.

The minimum value for nr_pdflush_threads_max is the current value of
nr_pdflush_threads_min and the maximum value can be 1000.

Documentation/sysctl/vm.txt is also updated.

[akpm@linux-foundation.org: fix comment, fix whitespace, use __read_mostly]
Signed-off-by: Peter W Morreale <pmorreale@novell.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomm: fix pdflush thread creation upper bound
Peter W Morreale [Tue, 7 Apr 2009 02:00:28 +0000 (19:00 -0700)] 
mm: fix pdflush thread creation upper bound

Fix a race on creating pdflush threads.  Without the patch, it is possible
to create more than MAX_PDFLUSH_THREADS threads, and this has been
observed in practice on IO loaded SMP machines.

The fix involves moving the lock around to protect the check against the
thread count and correctly dealing with thread creation failure.

This fix also _mostly_ repairs a race condition on how quickly the threads
are created.  The original intent was to create a pdflush thread (up to
the max allowed) every second.  Without this patch is is possible to
create NCPUS pdflush threads concurrently.  The 'mostly' caveat is because
an assumption is made that thread creation will be successful.  If we fail
to create the thread, the miss is not considered fatal.  (we will try
again in 1 second)

Signed-off-by: Peter W Morreale <pmorreale@novell.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoesp: fix section mismatch warning
Randy Dunlap [Tue, 7 Apr 2009 02:00:26 +0000 (19:00 -0700)] 
esp: fix section mismatch warning

Not critical.

  WARNING: drivers/char/esp.o(.text+0x278): Section mismatch in reference from the function show_serial_version() to the variable .init.data:serial_version
  The function show_serial_version() references
  the variable __initdata serial_version.
  This is often because show_serial_version lacks a __initdata
  annotation or the annotation of serial_version is wrong.

  WARNING: drivers/char/esp.o(.text+0x27d): Section mismatch in reference from the function show_serial_version() to the variable .init.data:serial_name
  The function show_serial_version() references
  the variable __initdata serial_name.
  This is often because show_serial_version lacks a __initdata
  annotation or the annotation of serial_name is wrong.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andrew J. Robinson <arobinso@nyx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agobranch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y
Linus Torvalds [Tue, 7 Apr 2009 14:59:41 +0000 (07:59 -0700)] 
branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y

Fix the branch tracer barfing on comma statements within if ()
statements.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agobranch tracer: Fix for enabling branch profiling makes sparse unusable
Bart Van Assche [Sun, 5 Apr 2009 14:20:02 +0000 (16:20 +0200)] 
branch tracer: Fix for enabling branch profiling makes sparse unusable

One of the changes between kernels 2.6.28 and 2.6.29 is that a branch profiler
has been added for if() statements. Unfortunately this patch makes the sparse
output unusable with CONFIG_TRACE_BRANCH_PROFILING=y: when branch profiling is
enabled, sparse prints so much false positives that the real issues are no
longer visible. This behavior can be reproduced as follows:
* enable CONFIG_TRACE_BRANCH_PROFILING, e.g. by running make allyesconfig or
  make allmodconfig.
* run make C=2

Result: a huge number of the following sparse warnings.
...
include/linux/cpumask.h:547:2: warning: symbol '______r' shadows an earlier one
include/linux/cpumask.h:547:2: originally declared here
...

The patch below fixes this by disabling branch profiling while analyzing the
kernel code with sparse.

See also:
* http://lkml.org/lkml/2008/11/21/18
* http://bugzilla.kernel.org/show_bug.cgi?id=12925

Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <200904051620.02311.bart.vanassche@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoPCI: Fix oops in pci_vpd_truncate
Anton Vorontsov [Tue, 31 Mar 2009 22:23:41 +0000 (02:23 +0400)] 
PCI: Fix oops in pci_vpd_truncate

pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might
happen:

  sky2 driver version 1.22
  Unable to handle kernel paging request for data at address 0x0000000c
  Faulting instruction address: 0xc01836fc
  Oops: Kernel access of bad area, sig: 11 [#1]
  [...]
  NIP [c01836fc] pci_vpd_truncate+0x38/0x40
  LR [c029be18] sky2_probe+0x14c/0x518
  Call Trace:
  [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable)
  [ef82be20] [c018a11c] local_pci_probe+0x24/0x34
  [ef82be30] [c018a14c] pci_call_probe+0x20/0x30
  [ef82be50] [c018a330] __pci_device_probe+0x64/0x78
  [ef82be60] [c018a44c] pci_device_probe+0x30/0x58
  [ef82be80] [c01aa270] really_probe+0x78/0x1a0
  [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8
  [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c
  [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34
  [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc
  [ef82bf20] [c01aa87c] driver_register+0x6c/0x110
  [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c
  [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40
  [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0
  [ef82bfd0] [c0362240] do_initcalls+0x38/0x58

This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so
pci_vpd_truncate() is called before late_initcall(pci_sysfs_init),
therefore ->attr isn't yet initialized.

Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 7 Apr 2009 15:02:02 +0000 (08:02 -0700)] 
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  tomoyo: remove "undelete domain" command.

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param
Linus Torvalds [Tue, 7 Apr 2009 14:42:25 +0000 (07:42 -0700)] 
Merge git://git./linux/kernel/git/rusty/linux-2.6-module-and-param

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param:
  Revert "module: remove the SHF_ALLOC flag on the __versions section."

15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Tue, 7 Apr 2009 14:40:55 +0000 (07:40 -0700)] 
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits)
  powerpc: Fix oops when loading modules
  powerpc: Wire up preadv and pwritev
  powerpc/ftrace: Fix printf format warning
  powerpc/ftrace: Fix #if that should be #ifdef
  powerpc: Fix ptrace compat wrapper for FPU register access
  powerpc: Print information about mapping hw irqs to virtual irqs
  powerpc: Correct dependency of KEXEC
  powerpc: Disable VSX or current process in giveup_fpu/altivec
  powerpc/pseries: Enable relay in pseries_defconfig
  powerpc/pseries: Fix ibm,client-architecture comment
  powerpc/pseries: Scan for all events in rtasd
  powerpc/pseries: Add dispatch dispersion statistics
  powerpc: Clean up some prom printouts
  powerpc: Print progress of ibm,client-architecture method
  powerpc: Remove duplicated #include's
  powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook
  powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf
  fsl-diu-fb: Pass the proper device for dma mapping routines
  powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.
  cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.
  ...

15 years agoramfs: fix double freeing s_fs_info on failed mount
Ingo Molnar [Tue, 7 Apr 2009 06:16:50 +0000 (14:16 +0800)] 
ramfs: fix double freeing s_fs_info on failed mount

If ramfs mount fails, s_fs_info will be freed twice in ramfs_fill_super()
and ramfs_kill_sb(), leading to kernel oops.

Consolidate and beautify the code.
Make sure s_fs_info and s_root are in known good states.

Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agohwmon: Add Asus ATK0110 support
Luca Tettamanti [Tue, 7 Apr 2009 13:32:59 +0000 (15:32 +0200)] 
hwmon: Add Asus ATK0110 support

Asus boards have an ACPI interface for interacting with the hwmon (fan,
temperatures, voltages) subsystem; this driver exposes the relevant
information via the standard sysfs interface.

There are two different ACPI interfaces:
- an old one (based on RVLT/RFAN/RTMP)
- a new one (GGRP/GITM)
Both may be present but there a few cases (my board, sigh) where the
new interface is just an empty stub; the driver defaults to the old one
when both are present.
The old interface has received a considerable testing, but I'm still
awaiting confirmation from my tester that the new one is working as
expected (hence the debug code is still enabled).

Currently all the attributes are read-only, though a (partial) control
should be possible with a bit more work.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: (lm95241) Convert to new-style i2c driver
Jean Delvare [Tue, 7 Apr 2009 13:32:59 +0000 (15:32 +0200)] 
hwmon: (lm95241) Convert to new-style i2c driver

The legacy i2c binding model is going away really soon now, so convert
the lm95241 driver to the new binding model or it will break.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Davide Rizzo <elpa.rizzo@gmail.com>
15 years agoftrace: Correct a text align for event format output
Zhaolei [Fri, 3 Apr 2009 10:24:46 +0000 (18:24 +0800)] 
ftrace: Correct a text align for event format output

If we cat debugfs/tracing/events/ftrace/bprint/format, we'll see:
name: bprint
ID: 6
format:
field:unsigned char common_type; offset:0; size:1;
field:unsigned char common_flags; offset:1; size:1;
field:unsigned char common_preempt_count; offset:2; size:1;
field:int common_pid; offset:4; size:4;
field:int common_tgid; offset:8; size:4;

field:unsigned long ip; offset:12; size:4;
field:char * fmt; offset:16; size:4;
field: char buf; offset:20; size:0;

print fmt: "%08lx (%d) fmt:%p %s"

There is an inconsistent blank before char buf.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
LKML-Reference: <49D5E3EE.70201@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoUpdate /debug/tracing/README
Nikanth Karthikesan [Mon, 23 Mar 2009 06:28:31 +0000 (11:58 +0530)] 
Update /debug/tracing/README

Some of the tracers have been renamed, which was not updated in the in-kernel
run-time README file. Update it.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200903231158.32151.knikanth@suse.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agotracing/ftrace: alloc the started cpumask for the trace file
Frederic Weisbecker [Wed, 1 Apr 2009 20:53:08 +0000 (22:53 +0200)] 
tracing/ftrace: alloc the started cpumask for the trace file

Impact: fix a crash while cat trace file

Currently we are using a cpumask to remind each cpu where a
trace occured. It lets us notice the user that a cpu just had
its first trace.

But on latest -tip we have the following crash once we cat the trace
file:

IP: [<c0270c4a>] print_trace_fmt+0x45/0xe7
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/class/net/eth0/carrier
Pid: 3897, comm: cat Not tainted (2.6.29-tip-02825-g0f22972-dirty #81)
EIP: 0060:[<c0270c4a>] EFLAGS: 00010297 CPU: 0
EIP is at print_trace_fmt+0x45/0xe7
EAX: 00000000 EBX: 00000000 ECX: c12d9e98 EDX: ccdb7010
ESI: d31f4000 EDI: 00322401 EBP: d31f3f10 ESP: d31f3efc
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process cat (pid: 3897, ti=d31f2000 task=d3b3cf20 task.ti=d31f2000)
Stack:
d31f4080 ccdb7010 d31f4000 d691fe70 ccdb7010 d31f3f24 c0270e5c d31f4000
d691fe70 d31f4000 d31f3f34 c02718e8 c12d9e98 d691fe70 d31f3f70 c02bfc33
00001000 09130000 d3b46e00 d691fe98 00000000 00000079 00000001 00000000
Call Trace:
[<c0270e5c>] ? print_trace_line+0x170/0x17c
[<c02718e8>] ? s_show+0xa7/0xbd
[<c02bfc33>] ? seq_read+0x24a/0x327
[<c02bf9e9>] ? seq_read+0x0/0x327
[<c02ab18b>] ? vfs_read+0x86/0xe1
[<c02ab289>] ? sys_read+0x40/0x65
[<c0202d8f>] ? sysenter_do_call+0x12/0x3c
Code: 00 00 00 89 45 ec f7 c7 00 20 00 00 89 55 f0 74 4e f6 86 98 10 00 00 02 74 45 8b 86 8c 10 00 00 8b 9e a8 10 00 00 e8 52 f3 ff ff <0f> a3 03 19 c0 85 c0 75 2b 8b 86 8c 10 00 00 8b 9e a8 10 00 00
EIP: [<c0270c4a>] print_trace_fmt+0x45/0xe7 SS:ESP 0068:d31f3efc
CR2: 0000000000000000
---[ end trace aa9cf38e5ebed9dd ]---

This is because we alloc the iter->started cpumask on tracing_pipe_open but
not on tracing_open.

It hadn't been noticed until now because we need to have ring buffer overruns
to activate the starting of cpu buffer detection.

Also, we need a check to not print the messagge for the first trace on the file.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238619188-6109-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agotracing, x86: remove duplicated #include
Huang Weiyi [Tue, 31 Mar 2009 12:41:31 +0000 (20:41 +0800)] 
tracing, x86: remove duplicated #include

Remove duplicated #include in arch/x86/kernel/ftrace.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
LKML-Reference: <1238503291-2532-1-git-send-email-weiyi.huang@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoftrace: Add check of sched_stopped for probe_sched_wakeup
Zhaolei [Tue, 31 Mar 2009 07:24:51 +0000 (15:24 +0800)] 
ftrace: Add check of sched_stopped for probe_sched_wakeup

The wakeup tracing in sched_switch does not stop when a user
disables tracing. This is because the probe_sched_wakeup() is missing
the check to prevent the wakeup from being traced.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
LKML-Reference: <49D1C543.3010307@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agofunction-graph: add proper initialization for init task
Steven Rostedt [Thu, 26 Mar 2009 00:55:00 +0000 (20:55 -0400)] 
function-graph: add proper initialization for init task

Impact: fix to crash going to kexec

The init task did not properly initialize the function graph pointers.
Altough these pointers are NULL, they can not be assumed to be NULL
for the init task, and must still be properly initialize.

This usually is not an issue since a problem only arises when a task
exits, and the init tasks do not usually exit. But when doing tests
with kexec, the init tasks do exit, and the bug appears.

This patch properly initializes the init tasks function graph data
structures.

Reported-and-Tested-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <alpine.DEB.2.00.0903252053080.5675@gandalf.stny.rr.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>