[SCSI] lpfc: Fix eh_ return codes for commands

Return FAILED from eh_ routines if command(s) is(are) not completed

There were scenarios where we may have returned from the error
handlers prior to all affected commands being flushed to the midlayer.
Add changes to ensure this doesn't happen.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Remove unneeded IOCB_t * cast

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Adjust lpfc_scsi_buf allocation

Adjust lpfc_scsi_buf allocation to account for lun_queue_depth and
error handling

Under high load and high duress, the error handler could steal some
command resources from the normal i/o path. Rework to allocate
additional resources to avoid this scneario.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Replace lpfc_sli_issue_iocb_wait_high_priority

Replace lpfc_sli_issue_iocb_wait_high_priority with lpfc_sli_issue_iocb_wait.

Simplify code paths, as there really wasn't a "priority"

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Fix for "command completion for iotax x?? not found"

From: James Smart <James.Smart@emulex.com>

There were scenarios where the error handlers could reuse an iotag
value of an active io.  Remove all possibility of this by
pre-assigning iotag resources to command resources.

Signed-off-by: James Smart <James.Smart@emulex.com>
Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Remove RPI hash from the driver

Table was not providing a lot of value and injected a couple of
errors. Removed it and made functionality inline.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Restore HEX safe bahavior of the sysfs xxx_store functions.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Fix for "Unknown IOCB command Data: x0 x3 x0 x0"

Fix for "Unknown IOCB command Data: x0 x3 x0 x0" messages and
inability to see devices

On some platforms, the host-memory based ring mgmt area was not
zero. Also, driver wasn't manipulating the entire 32bits of the ring
pointers.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Fix comments for nodev_tmo

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Add range checking for attributes passed as options at load time.

Reuse macros defined for sysfs store callbacks in the initialization
code in order to enforce the same range checking.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Return -EINVAL, -EPERM, and -EIO instead of 0 from sysfs callbacks

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Update to Emulex hba model names

Update adapter names to match Emulex naming conventions.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc: Cleanup code in lpfc_get_stats().

Cleanup white spaces in argument calls & initializations, prune if
statements, remove casting and remove redundant if checks.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] remove broken driver cpqfc

Hopefully there should be a brand new replacement driver for this heap
of junk by the beginning of next year.

Acked By: Martin K. Petersen <mkp@mkp.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fix up mismerge in osst

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] update fc_transport for removal of block/unblock functions

We recently went back to implement a board reset. When we perform the
reset, we wanted to tear down the internal data structures and rebuild
them. Unfortunately, when it came to the rport structure, things were
odd. If we deleted them, the scsi targets and sdevs would be
torn down. Not a good thing for a temporary reset. We could block the
rports, but we either maintain the internal structures to keep the
rport reference (perhaps even replicating what's in the transport),
or we have to fatten the fc transport with new search routines to find
the rport (and deal with a case of a dangling rport that the driver
forgets).

It dawned on me that we had actually reached this state incorrectly.
When the fc transport first started, we did the block/unblock first, then
added the rport interface. The purpose of block/unblock is to hide the
temporary disappearance of the rport (e.g. being deleted, then readded).
Why are we making the driver do the block/unblock ? We should be making
the transport have only an rport add/delete, and the let the transport
handle the block/unblock.

So... This patch removes the existing fc_remote_port_block/unblock
functions. It moves the block/unblock functionality into the
fc_remote_port_add/delete functions.  Updates for the lpfc driver are
included. Qlogic driver updates are also enclosed, thanks to the
contributions of Andrew Vasquez. [Note: the qla2xxx changes are
relative to the scsi-misc-2.6 tree as of this morning - which does
not include the recent patches sent by Andrew]. The zfcp driver does
not use the block/unblock functions.

One last comment: The resulting behavior feels very clean. The LLDD is
concerned only with add/delete, which corresponds to the physical
disappearance.  However, the fact that the scsi target and sdevs are
not immediately torn down after the LLDD calls delete causes an
interesting scenario... the midlayer can call the xxx_slave_alloc and
xxx_queuecommand functions with a sdev that is at the location the
rport used to be. The driver must validate the device exists when it
first enters these functions. In thinking about it, this has always
been the case for the LLDD and these routines. The existing drivers
already check for existence. However, this highlights that simple
validation via data structure dereferencing needs to be watched.
To deal with this, a new transport function, fc_remote_port_chkready()
was created that LLDDs should call when they first enter these two
routines. It validates the rport state, and returns a scsi result
which could be returned. In addition to solving the above, it also
creates consistent behavior from the LLDD's when the block and deletes
are occuring.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] use scmd_id(), scmd_channel() throughout code

Wrap a highly common idiom.  Makes the code easier to read, helps pave
the way for sdev->{id,channel} removal, and adds a token that can easily
by grepped-for in the future.

There are a couple sdev_id() and scmd_printk() updates thrown in as well.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] use sfoo_printk() in drivers

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] use {sdev,scmd,starget,shost}_printk in generic code

rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] introduce sfoo_printk, sfoo_id, sfoo_channel helpers

New dev_printk wrappers, which allow us to shrink code, and
eliminate direct references to host/channel/id/lun members:
scmd_printk()

Introduce wrappers for highly common idioms, which may also help us
eliminate some ->{channel,id} references in the future:
{scmd,sdev}_id()
{scmd,sdev}_channel()

The scmd_* wrappers are present in scsi/scsi_device.h because they all
employ the dereference chain cmd->device->$member.  We would prefer to
use static inline functions rather than macros, but that would have a

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] kill unused scsi_scan_single_target()

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] Add an 'Issue LIP' device attribute in fc_transport class

Ok, here's a patch to add such a common API for fc transport users.
Relevant LLD changes (lpfc and qla2xxx) also present.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] mptsas: white space fixes and version bump

Various whitespace and comment fixes from Eric, aswell as a version
bump.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] mptsas: add support for PHY resets

Support PHY resets in mptsas.  Thanks to Eric for various bug fixes
and improvements.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] sas: add support for PHY resets

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] sas: add flag for locally attached PHYs

Add a flag to mark a PHY as attached to the HBA as opposed to beeing on
an expander.  This is needed because various features are only supported
on those.  This is a crude hack, the proper fix would be to use
different classes for host-attached vs expander phys.  I'm looking into
that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] sr: remove dead code

This patch fixes an issue reported in drivers/scsi/sr.c by Coverity

Error reported: Pointer returned from "scsi_cd" is never used

Patch description:
 Remove the scsi_cd() call as it does not have any effect.

Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] Fix issue reported by coverity in drivers/scsi/scsi_ioctl.c

This patch attempts to fix an issue found in drivers/scsi/scsi_ioctl.c by Coverity.

Error reported:
CID: 3437
Checker: FORWARD_NULL (help)
File: /export2/p4-coverity/mc2/linux26/drivers/scsi/scsi_ioctl.c
Function: scsi_ioctl_send_command
Description: Variable "buf" tracked as NULL was passed to a function that dereferences it.

Patch description:
buf can be NULL if inlen and outlen are both 0. This patch adds check if the
length is non-zero before calling copy from/to user.

Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] mptsas: support link error attributes

.. and the fusion part.  I had to move around the debug functions around
a little bit so they are below the transport class methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: put back label erroneously removed by eh_active patch

The label eh_dev_reset_done is still in use

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] scsi_transport_sas: support link error attributes

For now supporting the ->get_linkerrors method is mandatory.  I'll
probably be beaten to implement the .show_foo variables and different
types of attributes soon..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] sgiwd93: small fixes

Move the remaining bits of sgiwd93.h into sgiwd93.c; replace the use of
CMD_PER_LUN and CAN_QUEUE by raw numbers.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] dec_esp: Use the right address space macro

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] dec_esp: Use physical addresses

Use physical addresses at the interface level, letting drivers remap
them as appropriate.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] dec_esp: Fix mapping of ESP.

From: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Mon Jun 13 19:55:42 2005 +0000

These should really be addresses obtained with ioremap() or some
bus-specific backend, but for now...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: fix unnecessary activation of blk tag queue

From:  'Andrew Vasquez' <andrew.vasquez@qlogic.com>

Drop scsi_populate_tag_msg() interrogation.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: fix compile warning

The file is missing an include of scsi_transport_fc.h

drivers/scsi/qla2xxx/qla_rscn.c:334: error: implicit declaration of function 'fc_remote_port_unblock'

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] move the mid-layer printk's over to shost/starget/sdev_printk

This should eliminate (at least in the mid layer) to make numeric
assumptions about any of the enumeration variables.  As a side effect,
it will also make all the messages consistent and line us up nicely for
the error logging strategy (if it ever shows itself again).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: remove eh_active checks in qla2xxx error handling

Here's a patch which drops the eh_active checks in the qla2xxx
eh_handler callbacks.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] avoid overflows in disk size calculations

Be more careful about doing the arithmetic in the non-LBD case.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Resync with latest released ISP23xx/63xx firmware -- 3.03.18.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Update license.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Use midlayer's int_to_scsilun() function.

While populating command type 6 and 7 IOCBs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Add support to dynamically enable/disable ZIO.

ISP23xx and ISP24xx chips have support for an adaptive
method of posting SCSI command completions for multiple SCSI
commands during a single system interrupt.

SCSI commands are placed on the system response queue
without interrupting the host until 1) a delay timer
expires; or 2) a SCSI command completes with an error.

As long as the host software (qla2xxx) services the response
queue for completions (this polling is done during
queuecommand()) within the 'delay timer' period, the
firmware will not generate system interrupt.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Correct issue where fcport is prematurely marked DEAD.

The non-handled failure cases of the Fabric Login mailbox
command handling logic would incorrectly mark the fcport as
dead and not allow the standard port-down-retry-count logic
to manage the transition.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aacraid: Newer adapter communication iterface support

Received from Mark Salyzyn.

This patch adds the 'new comm' interface, which modern AAC based
adapters that are less than a year old support in the name of much
improved performance. These modern adapters support both the legacy and
the 'new comm' interfaces.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Merge HEAD from ../scsi-misc-2.6-old

Merge master.kernel.org:/home/rmk/linux-2.6-mmc

Merge master.kernel.org:/home/rmk/linux-2.6-arm

Minor manual fixups for gfp_t clashes.

[SCSI] aacraid: remove compiler warning

Received from Mark Salyzyn.

This patch resolves a compiler warning on 64 bit architectures.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aacraid: fix struct element cpu order

Received from Mark Salyzyn.

The compat field needed to be in cpu order.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aacraid: fix inquiry page

Received from Mark Salyzyn.

This patch uses the adapter supplemental information AdapterTypeText as
the default for the array name.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aacraid: Use DMA mask defines

From: Mark Haverkamp <markh@osdl.org>
Received from Mark Salyzyn.

This patch changes the driver over to utilizing the DMA_64BIT_MASK and
DMA_32BIT_MASK manifests.

Applies to the scsi-rc-fixes-2.6 git tree.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Rejects fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Merge branch 'sx8' of /linux/kernel/git/jgarzik/misc-2.6

Merge branch 'upstream' of /linux/kernel/git/jgarzik/libata-dev

Merge branch 'upstream' of /linux/kernel/git/jgarzik/netdev-2.6

Merge branch 'elevator-switch' of git://brick.kernel.dk/data/git/linux-2.6-block

Manual fixup for trivial "gfp_t" changes.

Merge branch 'generic-dispatch' of git://brick.kernel.dk/data/git/linux-2.6-block

Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

[ARM] 3042/1: AAED-2000 - LCD panel informations

Patch from Bellido Nicolas

The AAED-2000 is equiped with an 640x480 LCD.
This adds the parameters that will be passed to the AAEC-2000 platform code.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3041/1: AAEC-2000 - CLCD controller platform glue

Patch from Bellido Nicolas

The AAEC-2000 has an ARM PrimeCell PL110 Color LCD Controller.
This patch contains the platform glue that will be used by specific boards.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3040/1: AAEC-2000 - Preliminary clock interface support

Patch from Bellido Nicolas

Here is a preliminary clock interface support for the AAEC-2000.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3039/1: AAEC-2000 - Add MTD support

Patch from Bellido Nicolas

This adds platform code for MTD devices on AAEC-2000.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3038/1: AAEC-2000 - Proper includes in hardware.h

Patch from Bellido Nicolas

linux/config.h is not necessary in hardware.h, while asm/sizes.h and asm/arch//aaec2000.h will be used later.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3037/1: AAED-2000 - Add defines for GPIO registers on external port.

Patch from Bellido Nicolas

The AAED-2000 board has GPIO pins on an external port.
This patch adds the defines, and do the necessary mapping.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3036/1: AAEC-2000 - Add defines for GPIO registers

Patch from Bellido Nicolas

Add defines for GPIO registers on the AAEC-2000 processor.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge /pub/scm/linux/kernel/git/acme/net-2.6.15

[ARM] 2897/2: PXA2xx IRDA support

Patch from Nicolas Pitre

This is the PXA2xx common IRDA driver, plus platform support
for Lubbock and Mainstone.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3035/1: RISCOS compat code fix

Patch from Nicolas Pitre

From: Daniel Jacobowitz <dan@debian.org>

> I also fixed a bug that confused me greatly while trying to debug: one
> SIGILL has long been a SIGSEGV because of some broken RISCOS
> compatibility code.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3031/1: fix typos in comments of mmc.h

Patch from Erik Hovland

I noticed that the same typo (i before c in associated) showed up twice
in the file kernel/include/linux/mmc/mmc.h.

This patch fixes both of the instances I found with this mistake. The
typos are in comments and should have no affect on working code.

E

Signed-off-by: Erik Hovland <erik@hovland.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2921/1: Support for the RTC / nvram on the Comdial MP1000

Patch from Jon Ringle

This adds support for the RTC and nvram on the Comdial MP1000

Signed-off-by: Jon Ringle
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3029/1: Add HWUART support for PXA 255/26x

Patch from Matt Reimer

Adds support for HWUART on PXA 255 / 26x. This patch originally came from
http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch
and has been tweaked by me.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2787/2: PXA27x low power modes support

Patch from Todd Poynor

Add symbols for PXA2xx PWRMODE register M field that selects low-power
mode, replace unadorned constants.  Honor power mode parameter of
pxa_cpu_suspend(mode), no longer force to 3 (sleep).  Full Deep Sleep
low-power mode support for PXA27x is pending generic PM interfaces to
select more than 2 suspend-to-RAM-style power modes, but this is
expected soon. This can be hardcoded in the meantime by replacing the
pxa_cpu_suspend() parameter value.  From David Burrage and Todd Poynor.
Try #2 removes one of the register copies and moves the code to save the
pxa_cpu_suspend parameter to immediately surround the call that requires
the parameter value be preserved.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000

Patch from Jon Ringle

This patch gives support for the CS8900A ethernet chip on the Comdial MP1000

Signed-off-by: Jon Ringle
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2918/1: [update] Base port of Comdial MP1000 platfrom

Patch from Jon Ringle

Updated 2898/1 per comments:
- Removed fixup
- Moved code in mach-mp1000/ to mach-clps711x/
- Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom
Please comment.

Signed-off-by: Jon Ringle
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[PATCH] gfp_t: the rest

zone handling, mapping->flags handling

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: reiserfs mapping_set_gfp_mask() use

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: remaining bits of drivers/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/net

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: remaining bits of arch/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: sound

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/infiniband

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/scsi

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: kernel/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: drivers/usb

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (simple cases)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (xtensa)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (amd64)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (sh)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (ppc)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (parisc)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (mips)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (frv)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (cris)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (alpha)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (ia64)

... and related annotations for amd64 - swiotlb code is shared, but
prototypes are not.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: dma-mapping (arm)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: block layer core

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: fs/*

 - ->releasepage() annotated (s/int/gfp_t), instances updated
 - missing gfp_t in fs/* added
 - fixed misannotation from the original sweep caught by bitwise checks:
   XFS used __nocast both for gfp_t and for flags used by XFS allocator.
   The latter left with unsigned int __nocast; we might want to add a
   different type for those but for now let's leave them alone.  That,
   BTW, is a case when __nocast use had been actively confusing - it had
   been used in the same code for two different and similar types, with
   no way to catch misuses.  Switch of gfp_t to bitwise had caught that
   immediately...

One tricky bit is left alone to be dealt with later - mapping->flags is
a mix of gfp_t and error indications.  Left alone for now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gfp_t: net/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>