linux-2.6
15 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 4 Feb 2009 21:58:37 +0000 (13:58 -0800)] 
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: add missing kernel-doc in sched.h

15 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 4 Feb 2009 21:58:24 +0000 (13:58 -0800)] 
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: do_each_pid_task() needs rcu lock

15 years agoiwlwifi: save PCI state before suspend, restore after resume
Reinette Chatre [Tue, 3 Feb 2009 18:20:03 +0000 (10:20 -0800)] 
iwlwifi: save PCI state before suspend, restore after resume

This is the right thing to do and fixes the following warning:

[  115.012278] ------------[ cut here ]------------
[  115.012281] WARNING: at drivers/pci/pci-driver.c:370
pci_legacy_suspend+0x85/0xc2()
[  115.012285] Hardware name: Latitude D630
[  115.012301] PCI PM: Device state not saved by
iwl3945_pci_suspend+0x0/0x4c [iwl3945]
[  115.012304] Modules linked in: fuse nfsd lockd nfs_acl auth_rpcgss
exportfs sunrpc ipv6 acpi_cpufreq kvm_intel kvm snd_hda_codec_idt
snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_seq_device snd_pcm_oss
snd_mixer_oss ecb snd_pcm cryptomgr aead snd_timer crypto_blkcipher
snd snd_page_alloc ohci1394 crypto_hash crypto_algapi ch341 ieee1394
usbserial thermal iwl3945 mac80211 led_class lib80211 tg3 processor
i2c_i801 i2c_core sg cfg80211 libphy usbhid battery ac button sr_mod
cdrom evdev dcdbas ata_generic ata_piix libata sd_mod scsi_mod ext3
jbd mbcache uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded:
microcode]
[  115.012374] Pid: 4163, comm: pm-suspend Not tainted
2.6.29-rc3-00227-gf1dd849-dirty #67
[  115.012377] Call Trace:
[  115.012382]  [<ffffffff8023d04d>] warn_slowpath+0xb1/0xed
[  115.012387]  [<ffffffff80450b5e>] ? _spin_unlock_irqrestore+0x5c/0x78
[  115.012390]  [<ffffffff80254f08>] ? up+0x34/0x39
[  115.012394]  [<ffffffff80362319>] ? acpi_ut_release_mutex+0x5d/0x61
[  115.012397]  [<ffffffff803584b2>] ? acpi_get_data+0x5e/0x70
[  115.012400]  [<ffffffff80363dd9>] ? acpi_bus_get_device+0x25/0x39
[  115.012403]  [<ffffffff80363e98>] ? acpi_bus_power_manageable+0x11/0x29
[  115.012406]  [<ffffffff803462f7>] ? acpi_pci_power_manageable+0x17/0x19
[  115.012410]  [<ffffffff8033ddfd>] ? pci_set_power_state+0xcc/0x101
[  115.012418]  [<ffffffffa01f28e9>] ? iwl3945_pci_suspend+0x0/0x4c [iwl3945]
[  115.012422]  [<ffffffff803401e6>] pci_legacy_suspend+0x85/0xc2
[  115.012425]  [<ffffffff80340316>] pci_pm_suspend+0x34/0x86
[  115.012429]  [<ffffffff8039d7ce>] pm_op+0x52/0xe5
[  115.012432]  [<ffffffff8039dd78>] device_suspend+0x32a/0x451
[  115.012436]  [<ffffffff80269ec2>] suspend_devices_and_enter+0x3e/0x13a
[  115.012439]  [<ffffffff8026a128>] enter_state+0x110/0x164
[  115.012442]  [<ffffffff8026a233>] state_store+0xb7/0xd7
[  115.012446]  [<ffffffff8032f95f>] kobj_attr_store+0x17/0x19
[  115.012449]  [<ffffffff80307d64>] sysfs_write_file+0xe4/0x119
[  115.012453]  [<ffffffff802baa7a>] vfs_write+0xae/0x137
[  115.012456]  [<ffffffff802babc7>] sys_write+0x47/0x70
[  115.012459]  [<ffffffff8020b73a>] system_call_fastpath+0x16/0x1b
[  115.012467] ---[ end trace 829828966f6f24dc ]---

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwlwifi: clean key table in iwl_clear_stations_table
Reinette Chatre [Wed, 28 Jan 2009 17:38:30 +0000 (09:38 -0800)] 
iwlwifi: clean key table in iwl_clear_stations_table

Cleans uCode key table bit map iwl_clear_stations_table
since all stations are cleared also the key table must be.

Since the keys are not removed properly on suspend by mac80211
this may result in exhausting key table on resume leading
to memory corruption during removal

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoRevert "configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()"
Mark Fasheh [Wed, 4 Feb 2009 07:12:34 +0000 (23:12 -0800)] 
Revert "configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()"

This reverts commit 0e0333429a6280e6eb3c98845e4eed90d5f8078a.

I committed this by accident - Joel and Louis are working with the lockdep
maintainer to provide a better solution than just turning lockdep off.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: <Joel Becker <joel.becker@oracle.com>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Wed, 4 Feb 2009 17:39:12 +0000 (09:39 -0800)] 
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: pcm_oss: AFMT_S24_LE is set twice in return value
  ALSA: ASoC: email - update email addresses.
  OMAP: ASoC: Fix spinlock misuse in omap-pcm.c
  ALSA: hda - No widget selection for volume knob widgets in proc output
  ALSA: hda - Add support of iMac 24 Aluminium
  ALSA: alsa: time reaches -1, tested 0
  ALSA: hda - Add quirk for another HP dv5 model

15 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Wed, 4 Feb 2009 17:19:11 +0000 (18:19 +0100)] 
Merge branch 'fix/asoc' into for-linus

15 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Wed, 4 Feb 2009 17:19:07 +0000 (18:19 +0100)] 
Merge branch 'fix/hda' into for-linus

15 years agoALSA: pcm_oss: AFMT_S24_LE is set twice in return value
Roel Kluin [Wed, 4 Feb 2009 17:14:55 +0000 (18:14 +0100)] 
ALSA: pcm_oss: AFMT_S24_LE is set twice in return value

AFMT_S24_LE is set twice in return value

vi sound/core/oss/pcm_oss.c +640
#define AFMT_S24_LE      0x00008000
#define AFMT_S24_BE      0x00010000

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Wed, 4 Feb 2009 15:56:25 +0000 (07:56 -0800)] 
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (40 commits)
  Blackfin arch: Remove outdated code
  Blackfin arch: Fix udelay implementation
  Blackfin arch: Update Copyright information
  Blackfin arch: Add BF561 PPI POLS, POLC Masks
  Blackfin arch: Update CM-BF527 kernel config
  Blackfin arch: define bfin_memmap as static since it is only used here
  Blackfin arch: cplb mananger: use a do...while loop rather than a for loop
  Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails
  Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files
  Blackfin arch: build jtag tty driver as a module by default
  Blackfin arch: fix 2 bugs related to debug
  Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
  Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
  Blackfin arch: base SIC_IWR# programming on whether the MMR exists
  Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
  Blackfin arch: fixup board init function name
  Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
  Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed
  Blackfin arch: sync reboot handler with version in u-boot
  Blackfin arch: Faster Implementation of csum_tcpudp_nofold()
  ...

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 4 Feb 2009 15:54:00 +0000 (07:54 -0800)] 
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Kill bogus TPC/address truncation during 32-bit faults.
  sparc: fixup for sparseirq changes
  sparc64: Validate kernel generated fault addresses on sparc64.
  sparc64: On non-Niagara, need to touch NMI watchdog in NOHZ mode.
  sparc64: Implement NMI watchdog on capable cpus.
  sparc: Probe PMU type and record in sparc_pmu_type.
  sparc64: Move generic PCR support code to seperate file.

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 4 Feb 2009 15:52:21 +0000 (07:52 -0800)] 
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  sunrpc: fix rdma dependencies
  e1000: Fix PCI enable to honor the need_ioport flag
  sgi-xp: link XPNET's net_device_ops to its net_device structure
  pcnet_cs: Fix misuse of the equality operator.
  hso: add new device id's
  dca: redesign locks to fix deadlocks
  cassini/sungem: limit reaches -1, but 0 tested
  net: variables reach -1, but 0 tested
  qlge: bugfix: Add missing netif_napi_del call.
  qlge: bugfix: Add flash offset for second port.
  qlge: bugfix: Fix endian issue when reading flash.
  udp: increments sk_drops in __udp_queue_rcv_skb()
  net: Fix userland breakage wrt. linux/if_tunnel.h
  net: packet socket packet_lookup_frame fix

15 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-mfd
Linus Torvalds [Wed, 4 Feb 2009 15:40:54 +0000 (07:40 -0800)] 
Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: Remove non exported references from pcf50633

15 years agoBtrfs: don't return congestion in write_cache_pages as often
Chris Mason [Wed, 4 Feb 2009 14:33:00 +0000 (09:33 -0500)] 
Btrfs: don't return congestion in write_cache_pages as often

On fast devices that go from congested to uncongested very quickly, pdflush
is waiting too often in congestion_wait, and the FS is backing off to
easily in write_cache_pages.

For now, fix this on the btrfs side by only checking congestion after
some bios have already gone down.  Longer term a real fix is needed
for pdflush, but that is a larger project.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: Only prep for btree deletion balances when nodes are mostly empty
Chris Mason [Wed, 4 Feb 2009 14:12:46 +0000 (09:12 -0500)] 
Btrfs: Only prep for btree deletion balances when nodes are mostly empty

Whenever an item deletion is done, we need to balance all the nodes
in the tree to make sure we don't end up with an empty node if a pointer
is deleted.  This balance prep happens from the root of the tree down
so we can drop our locks as we go.

reada_for_balance was triggering read-ahead on neighboring nodes even
when no balancing was required.  This adds an extra check to avoid
calling balance_level() and avoid reada_for_balance() when a balance
won't be required.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: fix btrfs_unlock_up_safe to walk the entire path
Chris Mason [Wed, 4 Feb 2009 14:31:42 +0000 (09:31 -0500)] 
Btrfs: fix btrfs_unlock_up_safe to walk the entire path

btrfs_unlock_up_safe would break out at the first NULL node entry or
unlocked node it found in the path.

Some of the callers have missing nodes at the lower levels of the path, so this
commit fixes things to check all the nodes in the path before returning.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: change btrfs_del_leaf to drop locks earlier
Chris Mason [Wed, 4 Feb 2009 14:31:28 +0000 (09:31 -0500)] 
Btrfs: change btrfs_del_leaf to drop locks earlier

btrfs_del_leaf does two things.  First it removes the pointer in the
parent, and then it frees the block that has the leaf.  It has the
parent node locked for both operations.

But, it only needs the parent locked while it is deleting the pointer.
After that it can safely free the block without the parent locked.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: Change btrfs_truncate_inode_items to stop when it hits the inode
Chris Mason [Wed, 4 Feb 2009 14:30:58 +0000 (09:30 -0500)] 
Btrfs: Change btrfs_truncate_inode_items to stop when it hits the inode

btrfs_truncate_inode_items is setup to stop doing btree searches when
it has finished removing the items for the inode.  It used to detect the
end of the inode by looking for an objectid that didn't match the
one we were searching for.

But, this would result in an extra search through the btree, which
adds extra balancing and cow costs to the operation.

This commit adds a check to see if we found the inode item, which means
we can stop searching early.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: Don't try to compress pages past i_size
Chris Mason [Wed, 4 Feb 2009 14:31:06 +0000 (09:31 -0500)] 
Btrfs: Don't try to compress pages past i_size

The compression code had some checks to make sure we were only
compressing bytes inside of i_size, but it wasn't catching every
case.  To make things worse, some incorrect math about the number
of bytes remaining would make it try to compress more pages than the
file really had.

The fix used here is to fall back to the non-compression code in this
case, which does all the proper cleanup of delalloc and other accounting.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: join the transaction in __btrfs_setxattr
Josef Bacik [Wed, 4 Feb 2009 14:18:33 +0000 (09:18 -0500)] 
Btrfs: join the transaction in __btrfs_setxattr

With selinux on we end up calling __btrfs_setxattr when we create an inode,
which calls btrfs_start_transaction().  The problem is we've already called
that in btrfs_new_inode, and in btrfs_start_transaction we end up doing a
wait_current_trans().  If btrfs-transaction has started committing it will wait
for all handles to finish, while the other process is waiting for the
transaction to commit.  This is fixed by using btrfs_join_transaction, which
won't wait for the transaction to commit.  Thanks,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
15 years agoBtrfs: Handle SGID bit when creating inodes
Chris Ball [Wed, 4 Feb 2009 14:29:54 +0000 (09:29 -0500)] 
Btrfs: Handle SGID bit when creating inodes
Before this patch, new files/dirs would ignore the SGID bit on their
parent directory and always be owned by the creating user's uid/gid.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: Make btrfs_drop_snapshot work in larger and more efficient chunks
Chris Mason [Wed, 4 Feb 2009 14:27:02 +0000 (09:27 -0500)] 
Btrfs: Make btrfs_drop_snapshot work in larger and more efficient chunks

Every transaction in btrfs creates a new snapshot, and then schedules the
snapshot from the last transaction for deletion.  Snapshot deletion
works by walking down the btree and dropping the reference counts
on each btree block during the walk.

If if a given leaf or node has a reference count greater than one,
the reference count is decremented and the subtree pointed to by that
node is ignored.

If the reference count is one, walking continues down into that node
or leaf, and the references of everything it points to are decremented.

The old code would try to work in small pieces, walking down the tree
until it found the lowest leaf or node to free and then returning.  This
was very friendly to the rest of the FS because it didn't have a huge
impact on other operations.

But it wouldn't always keep up with the rate that new commits added new
snapshots for deletion, and it wasn't very optimal for the extent
allocation tree because it wasn't finding leaves that were close together
on disk and processing them at the same time.

This changes things to walk down to a level 1 node and then process it
in bulk.  All the leaf pointers are sorted and the leaves are dropped
in order based on their extent number.

The extent allocation tree and commit code are now fast enough for
this kind of bulk processing to work without slowing the rest of the FS
down.  Overall it does less IO and is better able to keep up with
snapshot deletions under high load.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: Change btree locking to use explicit blocking points
Chris Mason [Wed, 4 Feb 2009 14:25:08 +0000 (09:25 -0500)] 
Btrfs: Change btree locking to use explicit blocking points

Most of the btrfs metadata operations can be protected by a spinlock,
but some operations still need to schedule.

So far, btrfs has been using a mutex along with a trylock loop,
most of the time it is able to avoid going for the full mutex, so
the trylock loop is a big performance gain.

This commit is step one for getting rid of the blocking locks entirely.
btrfs_tree_lock takes a spinlock, and the code explicitly switches
to a blocking lock when it starts an operation that can schedule.

We'll be able get rid of the blocking locks in smaller pieces over time.
Tracing allows us to find the most common cause of blocking, so we
can start with the hot spots first.

The basic idea is:

btrfs_tree_lock() returns with the spin lock held

btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in
the extent buffer flags, and then drops the spin lock.  The buffer is
still considered locked by all of the btrfs code.

If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops
the spin lock and waits on a wait queue for the blocking bit to go away.

Much of the code that needs to set the blocking bit finishes without actually
blocking a good percentage of the time.  So, an adaptive spin is still
used against the blocking bit to avoid very high context switch rates.

btrfs_clear_lock_blocking() clears the blocking bit and returns
with the spinlock held again.

btrfs_tree_unlock() can be called on either blocking or spinning locks,
it does the right thing based on the blocking bit.

ctree.c has a helper function to set/clear all the locked buffers in a
path as blocking.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: hash_lock is no longer needed
Chris Mason [Wed, 4 Feb 2009 14:24:25 +0000 (09:24 -0500)] 
Btrfs: hash_lock is no longer needed

Before metadata is written to disk, it is updated to reflect that writeout
has begun.  Once this update is done, the block must be cow'd before it
can be modified again.

This update was originally synchronized by using a per-fs spinlock.  Today
the buffers for the metadata blocks are locked before writeout begins,
and everyone that tests the flag has the buffer locked as well.

So, the per-fs spinlock (called hash_lock for no good reason) is no
longer required.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: disable leak debugging checks in extent_io.c
Chris Mason [Wed, 4 Feb 2009 14:24:05 +0000 (09:24 -0500)] 
Btrfs: disable leak debugging checks in extent_io.c

extent_io.c has debugging code to report and free leaked extent_state
and extent_buffer objects at rmmod time.  This helps track down
leaks and it saves you from rebooting just to properly remove the
kmem_cache object.

But, the code runs under a fairly expensive spinlock and the checks to
see if it is currently enabled are not entirely consistent.  Some use
#ifdef and some #if.

This changes everything to #if and disables the leak checking.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: sort references by byte number during btrfs_inc_ref
Chris Mason [Wed, 4 Feb 2009 14:23:45 +0000 (09:23 -0500)] 
Btrfs: sort references by byte number during btrfs_inc_ref

When a block goes through cow, we update the reference counts of
everything that block points to.  The internal pointers of the block
can be in just about any order, and it is likely to have clusters of
things that are close together and clusters of things that are not.

To help reduce the seeks that come with updating all of these reference
counts, sort them by byte number before actual updates are done.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: async threads should try harder to find work
Chris Mason [Wed, 4 Feb 2009 14:23:24 +0000 (09:23 -0500)] 
Btrfs: async threads should try harder to find work

Tracing shows the delay between when an async thread goes to sleep
and when more work is added is often very short.  This commit adds
a little bit of delay and extra checking to the code right before
we schedule out.

It allows more work to be added to the worker
without requiring notifications from other procs.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoBtrfs: selinux support
Jim Owens [Wed, 4 Feb 2009 14:29:13 +0000 (09:29 -0500)] 
Btrfs: selinux support
Add call to LSM security initialization and save
resulting security xattr for new inodes.

Add xattr support to symlink inode ops.

Set inode->i_op for existing special files.

Signed-off-by: jim owens <jowens@hp.com>
15 years agoBtrfs: make btrfs acls selectable
Christian Hesse [Wed, 4 Feb 2009 14:28:28 +0000 (09:28 -0500)] 
Btrfs: make btrfs acls selectable
This patch adds a menu entry to kconfig to enable acls for btrfs.
This allows you to enable FS_POSIX_ACL at kernel compile time.

(updated by Jeff Mahoney to make the changes in fs/btrfs/Kconfig instead)

Signed-off-by: Christian Hesse <mail@earthworm.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
15 years agoBtrfs: Catch missed bios in the async bio submission thread
Chris Mason [Wed, 4 Feb 2009 14:19:41 +0000 (09:19 -0500)] 
Btrfs: Catch missed bios in the async bio submission thread

The async bio submission thread was missing some bios that were
added after it had decided there was no work left to do.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
15 years agoMerge branch 'core/xen' into x86/urgent
Ingo Molnar [Wed, 4 Feb 2009 13:54:56 +0000 (14:54 +0100)] 
Merge branch 'core/xen' into x86/urgent

15 years agoBlackfin arch: Remove outdated code
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Remove outdated code

The removed version with the loop registers saved on the stack was
originally intended to workaround the missing toolchain support for
LoopReg Clobbers.

Since our toolchain now supports these there is no point in keeping this
workaround. And since we don't touch LoopRegs anymore we're no longer
subject for ANOMALY_05000312.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix udelay implementation
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Fix udelay implementation

Avoid possible overflow during 32*32->32 multiplies.

Reported-by: Marco Reppenhagen <marco.reppenhagen@auerswald.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Update Copyright information
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Update Copyright information

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add BF561 PPI POLS, POLC Masks
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Add BF561 PPI POLS, POLC Masks

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Update CM-BF527 kernel config
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Update CM-BF527 kernel config

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: define bfin_memmap as static since it is only used here
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: define bfin_memmap as static since it is only used here

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: cplb mananger: use a do...while loop rather than a for loop
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: cplb mananger: use a do...while loop rather than a for loop

use a do...while loop rather than a for loop to get slightly better
optimization and to avoid gcc "may be used uninitialized" warnings ...
we know that the [id]cplb_nr_bounds variables will never be 0, so this
is OK

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fix bug - traps test case 19 for exception 0x2d fails
Bernd Schmidt [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails

Enable null pointer checking for ICPLBs. The code was there but for
some reason I had commented it out at some stage during development.

Should restrict this to 1K since atomic ops start there.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform...
Graf Yang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: build jtag tty driver as a module by default
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: build jtag tty driver as a module by default

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fix 2 bugs related to debug
Jie Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: fix 2 bugs related to debug

 - unable to single step over emuexcpt instruction
 - gdbproxy goes into infinite loop when doing gdb does "next" over
   "emuexcpt"

Don't decrement PC after software breakpoint.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
Bryan Wu [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning

Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
Graf Yang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2

bss_l2 section is garbage when the data in this section is used by
_bfin_relocate_l1_mem, so move the zero out function ahead.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: base SIC_IWR# programming on whether the MMR exists
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: base SIC_IWR# programming on whether the MMR exists

base SIC_IWR# programming on whether the MMR exists
rather than having to maintain another list of processors

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fixup board init function name
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: fixup board init function name

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs

Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this
already by stubbing things out

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: bfin_reset->_bfin_reset redirection no longer needed
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: sync reboot handler with version in u-boot
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: sync reboot handler with version in u-boot

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Faster Implementation of csum_tcpudp_nofold()
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Faster Implementation of csum_tcpudp_nofold()

Avoid conditional branch instructions during carry bit additions.
Special thanks to Bernd.
Simplify: Use ((len + proto) << 8) like every other __LITTLE_ENDIAN__ machine

Cc: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix bug - BF518 port F, G, and H have different mux offset compare...
Graf Yang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Fix bug - BF518 port F, G, and H have different mux offset compare to BF527

[Mike Frysinger <vapier.adi@gmail.com>: keep the ifdef nest down]

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add in cflag to support mlong-calls for kgdb_test
Grace Pan [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Add in cflag to support mlong-calls for kgdb_test

Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd
Sonic Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd

[Mike Frysinger <vapier.adi@gmail.com>:
 - setup P_DEFAULT_BOOT_SPI_CS  for every arch based on
   the default bootrom behavior and convert all our boards
   to it
 - revert previous anomaly change ... bf51x is not affected
   by anomaly 05000353]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoMAINTIANERS: Blackfin: remove subscribers-only marking
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
MAINTIANERS: Blackfin: remove subscribers-only marking

remove subscribers-only marking as the list is
automatically & silently moderated for people

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add ability to count and display number of NMI interrupts
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Add ability to count and display number of NMI interrupts

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add a few more instructions that can cause the trace buffer to be...
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Add a few more instructions that can cause the trace buffer to be discontiguous

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix URL
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Fix URL

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: cleanup bf54x ifdef mess in gpio code
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: cleanup bf54x ifdef mess in gpio code

merge more of the bf54x and !bf54x gpio code together to
cut down on #ifdef mess

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add one more check on `fp' to prevent double fault
Jie Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Add one more check on `fp' to prevent double fault

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: explicit add a might sleep to gpio_free
Uwe Kleine-Koenig [Wed, 4 Feb 2009 09:02:30 +0000 (17:02 +0800)] 
Blackfin arch: explicit add a might sleep to gpio_free

According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This patch changes the gpio_free implementations for the blackfin
architecture.

Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
15 years agoBlackfin arch: don't accidently re-enable interrupts
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: don't accidently re-enable interrupts

Make sure we don't accidently re-enable interrupts if we are being
called in atomic context

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Print out where the bootmode is coming from (for easier debugging).
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Print out where the bootmode is coming from (for easier debugging).

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: reset POLAR setting when acquiring a gpio for the first time
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: reset POLAR setting when acquiring a gpio for the first time

when requesting a GPIO for the first time, the POLAR setting is not
set to a sane state.  this can lead to indeterminate behavior that
cannot be resolved without an explicit write to the Blackfin port POLAR
register.

when requesting a GPIO for the first time via gpio_request(), the POLAR
setting for the GPIO in question should be set to sane state.  this
should occur if the GPIO has not been allocated in any other way.

some examples:
 - when doing something like "request_irq(); gpio_request();" on the
   same GPIO, the POLAR setting should not be reset.
 - when doing "gpio_request(); gpio_request();" on the same GPIO, the
   POLAR setting should be reset only the first time and not the second.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix Bug - request lines with peripheral_request_list, but don't get...
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Fix Bug - request lines with peripheral_request_list, but don't get freed with peripheral_free_list

Remove erroneous check_gpio(ident) in peripheral_free()

Reported-by: Michael McTernan <mmcternan@airvana.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix Bug - Kernel does not boot if re-program clocks
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: Fix Bug - Kernel does not boot if re-program clocks

On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data
path width, typically set 0 for a 32-bit bus width. On other
Blackfin derivatives this bit should be set by default.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fix bug - Dmacopy failed in BF537-STAMP
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: fix bug - Dmacopy failed in BF537-STAMP

Dmacopy failed in BF537-STAMP when copy from SRAM to SDRAM and kernel
will reboot automatically.

Fixing by doing a SSYNC before mucking with DMA registers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: enable bfin_eth in bf51x by default
Sonic Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: enable bfin_eth in bf51x by default

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: line up machine-/cpu- vars after BF54xM addition
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: line up machine-/cpu- vars after BF54xM addition

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: add support for mobile ddr bf54x parts
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: add support for mobile ddr bf54x parts

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: scrub comments/whitespace/cvs keywords
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)] 
Blackfin arch: scrub comments/whitespace/cvs keywords

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries
Thomas Renninger [Tue, 3 Feb 2009 16:46:46 +0000 (17:46 +0100)] 
ACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries

They were long enough set deprecated...

Update Documentation/cpu-freq/users-guide.txt:
The deprecated files listed there seen not to exist for some time anymore
already.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoACPI: make some IO ports off-limits to AML
Len Brown [Wed, 4 Feb 2009 03:52:12 +0000 (22:52 -0500)] 
ACPI: make some IO ports off-limits to AML

ACPICA exports acpi_os_validate_address() so the OS
can prevent BIOS AML from accessing specified addresses.

Start using this interface to prevent AML from accessing
some well known IO addresses that the OS "owns".

Signed-off-by: Len Brown <len.brown@intel.com>
15 years agox86: APIC: enable workaround on AMD Fam10h CPUs
Borislav Petkov [Tue, 3 Feb 2009 15:24:22 +0000 (16:24 +0100)] 
x86: APIC: enable workaround on AMD Fam10h CPUs

Impact: fix to enable APIC for AMD Fam10h on chipsets with a missing/b0rked
ACPI MP table (MADT)

Booting a 32bit kernel on an AMD Fam10h CPU running on chipsets with
missing/b0rked MP table leads to a hang pretty early in the boot process
due to the APIC not being initialized. Fix that by falling back to the
default APIC base address in 32bit code, as it is done in the 64bit
codepath.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
15 years agoxen: disable interrupts before saving in percpu
Jeremy Fitzhardinge [Wed, 4 Feb 2009 00:01:46 +0000 (16:01 -0800)] 
xen: disable interrupts before saving in percpu

Impact: Fix race condition

xen_mc_batch has a small preempt race where it takes the address of a
percpu variable immediately before disabling interrupts, thereby
leaving a small window in which we may migrate to another cpu and save
the flags in the wrong percpu variable.  Disable interrupts before
saving the old flags in a percpu.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
15 years agowrite-back: fix nr_to_write counter
Artem Bityutskiy [Mon, 2 Feb 2009 16:33:49 +0000 (18:33 +0200)] 
write-back: fix nr_to_write counter

Commit 05fe478dd04e02fa230c305ab9b5616669821dd3 introduced some
@wbc->nr_to_write breakage.

It made the following changes:
 1. Decrement wbc->nr_to_write instead of nr_to_write
 2. Decrement wbc->nr_to_write _only_ if wbc->sync_mode == WB_SYNC_NONE
 3. If synced nr_to_write pages, stop only if if wbc->sync_mode ==
    WB_SYNC_NONE, otherwise keep going.

However, according to the commit message, the intention was to only make
change 3.  Change 1 is a bug.  Change 2 does not seem to be necessary,
and it breaks UBIFS expectations, so if needed, it should be done
separately later.  And change 2 does not seem to be documented in the
commit message.

This patch does the following:
 1. Undo changes 1 and 2
 2. Add a comment explaining change 3 (it very useful to have comments
    in _code_, not only in the commit).

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFix my email address in qd65xx.[ch]/pata_qdi.c
Samuel Thibault [Tue, 3 Feb 2009 12:12:58 +0000 (13:12 +0100)] 
Fix my email address in qd65xx.[ch]/pata_qdi.c

The @fnac.net will be shut down within a couple of months, so fix my
email address.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Wed, 4 Feb 2009 00:52:44 +0000 (16:52 -0800)] 
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: remove fast unmounting
  UBIFS: return sensible error codes
  UBIFS: remount ro fixes
  UBIFS: spelling fix 'date' -> 'data'
  UBIFS: sync wbufs after syncing inodes and pages
  UBIFS: fix LPT out-of-space bug (again)
  UBIFS: fix no_chk_data_crc
  UBIFS: fix assertions
  UBIFS: ensure orphan area head is initialized
  UBIFS: always clean up GC LEB space
  UBIFS: add re-mount debugging checks
  UBIFS: fix LEB list freeing
  UBIFS: simplify locking
  UBIFS: document dark_wm and dead_wm better
  UBIFS: do not treat all data as short term
  UBIFS: constify operations
  UBIFS: do not commit twice

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 4 Feb 2009 00:52:10 +0000 (16:52 -0800)] 
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  NVRAM depends on RTC_DRV_CMOS
  rename platform_driver name "flash" to "sa1100-mtd"
  annotate that [fp, #-4] is the saved lr
  Use __SPIN_LOCK_UNLOCKED to initialize bad_irq_desc.lock
  ARM: OMAP: fix fault in enter_full_retention()
  ARM: OMAP: Mask interrupts when disabling interrupts, v2
  ARM: OMAP: gptimer min_delta_ns corrected
  ARM: OMAP: Fix hsmmc init, v2
  ARM: OMAP: Fix omap34xx revision detection for ES3.1
  ARM: OMAP: DMA: Fix uninitialized channel flags
  ARM: OMAP: Fix race in OMAP2/3 DMA IRQ handling
  ARM: OMAP: Fix McBSP spin_lock deadlock
  [ARM] 5366/1: fix shared memory coherency with VIVT L1 + L2 caches
  [ARM] call undefined instruction exception handler with irqs enabled
  [ARM] msm: fix build errors
  [ARM] etherh: continue fixing build failure

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Wed, 4 Feb 2009 00:50:20 +0000 (16:50 -0800)] 
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: add quota call to ocfs2_remove_btree_range()
  ocfs2: Wakeup the downconvert thread after a successful cancel convert
  ocfs2: Access the xattr bucket only before modifying it.
  configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()
  ocfs2: Fix possible deadlock in ocfs2_write_dquot()
  ocfs2: Push out dropping of dentry lock to ocfs2_wq

15 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Wed, 4 Feb 2009 00:49:54 +0000 (16:49 -0800)] 
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  [XFS] Warn on transaction in flight on read-only remount
  xfs: Check buffer lengths in log recovery
  don't reallocate sxp variable passed into xfs_swapext

15 years agosparc64: Kill bogus TPC/address truncation during 32-bit faults.
David S. Miller [Wed, 4 Feb 2009 00:28:23 +0000 (16:28 -0800)] 
sparc64: Kill bogus TPC/address truncation during 32-bit faults.

This builds upon eeabac7386ca13bfe1a58afeb04326a9e1a3a20e
("sparc64: Validate kernel generated fault addresses on sparc64.")

Upon further consideration, we actually should never see any
fault addresses for 32-bit tasks with the upper 32-bits set.

If it does every happen, by definition it's a bug.  Whatever
context created that fault would only have that fault satisfied
if we used the full 64-bit address.  If we truncate it, we'll
always fault the wrong address and we'll always loop faulting
forever.

So catch such conditions and mark them as errors always.  Log
the error and fail the fault.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosunrpc: fix rdma dependencies
Randy Dunlap [Tue, 3 Feb 2009 23:20:13 +0000 (15:20 -0800)] 
sunrpc: fix rdma dependencies

Fix sunrpc/rdma build dependencies.
Survives 12 build combinations of INET, IPV6, SUNRPC,
INFINIBAND, and INFINIBAND_ADDR_TRANS.

ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_connect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_destroy_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_resolve_route" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_resolve_addr" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_accept" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_listen" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_bind_addr" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoe1000: Fix PCI enable to honor the need_ioport flag
Karsten Keil [Tue, 3 Feb 2009 23:18:01 +0000 (15:18 -0800)] 
e1000: Fix PCI enable to honor the need_ioport flag

On machine were no IO ports are assigned the call
to pci_enable_device() will fail, even if need_ioport
is false, we need to use pci_enable_device_mem() here.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosgi-xp: link XPNET's net_device_ops to its net_device structure
Dean Nelson [Tue, 3 Feb 2009 23:16:17 +0000 (15:16 -0800)] 
sgi-xp: link XPNET's net_device_ops to its net_device structure

A recent patch by Stephen Hemminger to convert XPNET to use net_device_ops and
internal net_device_stats failed to link the net_device_ops structure to the
net_device structure. See commit e8ac9c55f28482f5b2f497a8e7eb90985db237c2
("xpnet: convert devices to new API").

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agopcnet_cs: Fix misuse of the equality operator.
Cord Walter [Tue, 3 Feb 2009 23:14:05 +0000 (15:14 -0800)] 
pcnet_cs: Fix misuse of the equality operator.

Signed-off-by: Cord Walter <qord@cwalter.net>
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agohso: add new device id's
Filip Aben [Tue, 3 Feb 2009 23:13:26 +0000 (15:13 -0800)] 
hso: add new device id's

This patch adds a few device ID's. It also removes an ID that was used
in an internal engineering version of a device and will never see
commercial light. Even if this ID will be 'recycled' in the future,
which is very unlikely, we don't know what kind of device will be
behind it. Therefore it's safer to remove it.

Signed-off-by: Filip Aben <f.aben@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoACPICA: add debug dump of BIOS _OSI strings
Len Brown [Tue, 3 Feb 2009 23:04:39 +0000 (18:04 -0500)] 
ACPICA: add debug dump of BIOS _OSI strings

on boot, print out the OSI strings the BIOS uses to query the OS.

To see this output...

build with CONFIG_ACPI_DEBUG

boot with
"acpi.debug_level=4" (ACPI_LV_INFO) (enabled by default)
and
"acpi.debug_level=1" (ACPI_UTILITIES) (default is 0)

example output:

ACPI: BIOS _OSI(Windows 2001) supported
ACPI: BIOS _OSI(Windows 2001 SP1) supported
ACPI: BIOS _OSI(Windows 2001 SP2) supported
ACPI: BIOS _OSI(Windows 2006) supported
ACPI: BIOS _OSI(Linux) not-supported
ACPI: BIOS _OSI(FreeBSD) not-supported

Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoftrace: do_each_pid_task() needs rcu lock
Oleg Nesterov [Tue, 3 Feb 2009 19:39:04 +0000 (20:39 +0100)] 
ftrace: do_each_pid_task() needs rcu lock

"ftrace: use struct pid" commit 978f3a45d9499c7a447ca7615455cefb63d44165
converted ftrace_pid_trace to "struct pid*".

But we can't use do_each_pid_task() without rcu_read_lock() even if
we know the pid itself can't go away (it was pinned in ftrace_pid_write).
The exiting task can detach itself from this pid at any moment.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years ago[XFS] Warn on transaction in flight on read-only remount
Felix Blyakher [Fri, 23 Jan 2009 03:34:05 +0000 (21:34 -0600)] 
[XFS] Warn on transaction in flight on read-only remount

Till VFS can correctly support read-only remount without racing,
use WARN_ON instead of BUG_ON on detecting transaction in flight
after quiescing filesystem.

Signed-off-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
15 years agoxfs: Check buffer lengths in log recovery
Dave Chinner [Thu, 22 Jan 2009 04:37:47 +0000 (15:37 +1100)] 
xfs: Check buffer lengths in log recovery

Before trying to obtain, read or write a buffer,
check that the buffer length is actually valid. If
it is not valid, then something read in the recovery
process has been corrupted and we should abort
recovery.

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux...
Felix Blyakher [Tue, 3 Feb 2009 16:38:41 +0000 (10:38 -0600)] 
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into for-linus

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Tue, 3 Feb 2009 15:39:55 +0000 (07:39 -0800)] 
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book
  libata: add no penalty retry request for EH device handling routines
  libata: improve probe failure handling
  libata: add @spd_limit to sata_down_spd_limit()
  libata: clear dev->ering in smarter way
  libata: check onlineness before using SPD in sata_down_spd_limit()
  libata: move ata_dev_disable() to libata-eh.c
  libata: fix EH device failure handling
  sata_nv: ck804 has borked hardreset too
  ide/libata: fix ata_id_is_cfa() (take 4)
  libata: fix kernel-doc warnings
  ahci: add a module parameter to ignore the SSS flags for async scanning
  sata_mv: Fix chip type for Hightpoint RocketRaid 1740/1742
  [libata] sata_sil: Fix compilation error with libata debugging enabled

15 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
David S. Miller [Tue, 3 Feb 2009 07:55:27 +0000 (23:55 -0800)] 
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6

15 years agodca: redesign locks to fix deadlocks
Maciej Sosnowski [Tue, 3 Feb 2009 07:26:57 +0000 (23:26 -0800)] 
dca: redesign locks to fix deadlocks

Change spin_locks to irqsave to prevent dead-locks.
Protect adding and deleting to/from dca_providers list.
Drop the lock during dca_sysfs_add_req() and dca_sysfs_remove_req() calls
as they might sleep (use GFP_KERNEL allocation).

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocassini/sungem: limit reaches -1, but 0 tested
Roel Kluin [Tue, 3 Feb 2009 07:19:50 +0000 (23:19 -0800)] 
cassini/sungem: limit reaches -1, but 0 tested

while (limit--)
if (test())
break;

if (limit <= 0)
goto test_failed;

In the last iteration, limit is decremented after the test to 0.
If just thereafter test() succeeds and a break occurs, the goto
still occurs because limit is 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc: fixup for sparseirq changes
Stephen Rothwell [Tue, 3 Feb 2009 06:14:28 +0000 (22:14 -0800)] 
sparc: fixup for sparseirq changes

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc64: Validate kernel generated fault addresses on sparc64.
David S. Miller [Tue, 3 Feb 2009 06:08:15 +0000 (22:08 -0800)] 
sparc64: Validate kernel generated fault addresses on sparc64.

In order to handle all of the cases of address calculation overflow
properly, we run sparc 32-bit processes in "address masking" mode
when running on a 64-bit kernel.

Address masking mode zeros out the top 32-bits of the address
calculated for every load and store instruction.

However, when we're in privileged mode we have to run with that
address masking mode disabled even when accessing userspace from
the kernel.

To "simulate" the address masking mode we clear the top-bits by
hand for 32-bit processes in the fault handler.

It is the responsibility of code in the compat layer to properly
zero extend addresses used to access userspace.  If this isn't
followed properly we can get into a fault loop.

Say that the user address is 0xf0000000 but for whatever reason
the kernel code sign extends this to 64-bit, and then the kernel
tries to access the result.

In such a case we'll fault on address 0xfffffffff0000000 but the fault
handler will process that fault as if it were to address 0xf0000000.
We'll loop faulting forever because the fault never gets satisfied.

So add a check specifically for this case, when the kernel is faulting
on a user address access and the addresses don't match up.

This code path is sufficiently slow path, and this bug is sufficiently
painful to diagnose, that this kind of bug check is warranted.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoALSA: ASoC: email - update email addresses.
Liam Girdwood [Mon, 2 Feb 2009 22:23:22 +0000 (22:23 +0000)] 
ALSA: ASoC: email - update email addresses.

This just updates my email address on some drivers I'd forgotten in a
previous patch.

Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agox86: add x86@kernel.org to MAINTAINERS
H. Peter Anvin [Tue, 3 Feb 2009 05:42:40 +0000 (21:42 -0800)] 
x86: add x86@kernel.org to MAINTAINERS

Impact: Documentation only

There is an email alias as well to reach the x86 maintainers: x86@kernel.org.
Document it.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>