Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  [ALSA] hda - Fix capture mute Widget for stac9250/9251
  [ALSA] snd-pcsp - fix pcsp_treble_info() to honour an item number
  [ALSA] hda - Added support for Foxconn P35AX-S mainboard
  [ALSA] hda - Fix COEF and EAPD in ALC889 auto-configuration mode
  [ALSA] hda - Fix noise on VT1708 codec
  [ALSA] hda - Add model for ASUS P5K-E/WIFI-AP

[ALSA] hda - Fix capture mute Widget for stac9250/9251

Fix capture mute widget for STAC9250/9251 codecs.  The widget 0x09
has no mute but 0x14 does actually.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

[ALSA] snd-pcsp - fix pcsp_treble_info() to honour an item number

This solves the problem with mixers wrongly displaying the PWM freq.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/x86/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: prevent PGE flush from interruption/preemption
  x86: use explicit copy in vdso_gettimeofday()
  namespacecheck: automated fixes
  x86/xen: fix arbitrary_virt_to_machine()
  x86: don't read maxlvt before checking if APIC is mapped
  x86: disable TSC for sched_clock() when calibration failed
  x86: distangle user disabled TSC from unstable
  x86: fix setup of cyc2ns in tsc_64.c

Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] integrator: fix build warnings and errors
  [ARM] fix OMAP include loops
  Revert "[ARM] pxa: spitz wants PXA27x UDC definitions"
  [ARM] 5053/1: define before use of processor_id
  [ARM] 5052/1: export clock functions for the at91x40
  [ARM] 5051/1: define pgtable_t for the !CONFIG_MMU case too
  [ARM] omap: fix omap clk support build errors
  [ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X.
  [ARM] 5043/1: pxafb: remove unused mode variable in pxafb_init_fbinfo
  [ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisation
  [ARM] 5040/1: BAST: Fix DM9000 IRQ flags initialisation
  [ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.c
  [ARM] 5025/2: fix collie cpu initialisation

spi: remove some spidev oops-on-rmmod paths

Somehow the spidev code forgot to include a critical mechanism: when the
underlying device is removed (e.g.  spi_master rmmod), open file
descriptors must be prevented from issuing new I/O requests to that
device.  On penalty of the oopsing reported by Sebastian Siewior
<bigeasy@tglx.de> ...

This is a partial fix, adding handshaking between the lower level (SPI
messaging) and the file operations using the spi_dev.  (It also fixes an
issue where reads and writes didn't return the number of bytes sent or
received.)

There's still a refcounting issue to be addressed (separately).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Reported-by: Sebastian Siewior <bigeasy@tglx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: remove node_ prefix_from ns subsystem

This is a slight change in the namespace cgroup subsystem api.

The change is that previously when cgroup_clone() was called (currently
only from the unshare path in ns_proxy cgroup, you'd get a new group named
"node_$pid" whereas now you'll get a group named after just your pid.)

The only users who would notice it are those who are using the ns_proxy
cgroup subsystem to auto-create cgroups when namespaces are unshared -
something of an experimental feature, which I think really needs more
complete container/namespace support in order to be useful.  I suspect the
only users are Cedric and Serge, or maybe a few others on
containers@lists.linux-foundation.org.  And in fact it would only be
noticed by the users who make the assumption about how the name is
generated, rather than getting it from the /proc/<pid>/cgroups file for
the process in question.

Whether the change is actually needed or not I'm fairly agnostic on, but I
guess it is more elegant to just use the pid as the new group name rather
than adding a fairly arbitrary "node_" prefix on the front.

[menage@google.com: provided changelog]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Paul Menage" <menage@google.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

for_each_online_pgdat(): kerneldoc fix

for_each_pgdat() was renamed to for_each_online_pgdat() and kerneldoc
comments should be updated accordingly.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frv: export empty_zero_page

Fix the following build error:

ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined!

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sys_prctl(): fix return of uninitialized value

If none of the switch cases match, the PR_SET_PDEATHSIG and
PR_SET_DUMPABLE cases of the switch statement will never write to local
variable `error'.

Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Cc: Andrew G. Morgan <morgan@kernel.org>
Acked-by: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: mpc85xx: fix building as a module

including of <asm/mpc85xx.h> causes build problems since it doesn't exist.

Also removed warning:
drivers/edac/mpc85xx_edac.c:45: warning: 'mpc85xx_ctl_name' defined but not used

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Acked-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: build fixes

This fixes various gpio-related build errors (mostly potential)
reported in part by Russell King and Uwe Kleine-König.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

S3C2410: fix driver MODULE_ALIAS()

Add a correct MODULE_ALIAS() entry for this driver to enable udev module
loading.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

S3C2410: clean out changelog header and tidy

Remove the old changelog entries which are now out of date and should be
extractable from git anyway.  Also tidy up the copyright for the driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

S3C2410: add error print if we cannot add attribute

Fix the following warning by checking the result of device_create_file and
printing an error but not removing the device (loss of debug registers is
not fatal).

drivers/video/s3c2410fb.c:905: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

S3C2410: ensure that FB_BLANK_POWERDOWN shuts down the controller

When a blank level of FB_BLANK_POWERDOWN is used, we should shut down the
controller so that it no longer tries to produce any panel signals or
data, and shuts down the DMA which is not needed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SM501: reverse FPEN/VBIASEN flags behaviour

To keep backwards compatibility, reverse the meanings of these flags so
that when they are not set, the driver uses the original behvaiour.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory hotplug: fix early allocation handling

Trying to add memory via add_memory() from within an initcall function
results in

bootmem alloc of 163840 bytes failed!
Kernel panic - not syncing: Out of memory

This is caused by zone_wait_table_init() which uses system_state to decide
if it should use the bootmem allocator or not.

When initcalls are handled the system_state is still SYSTEM_BOOTING but
the bootmem allocator doesn't work anymore.  So the allocation will fail.

To fix this use slab_is_available() instead as indicator like we do it
everywhere else.

[akpm@linux-foundation.org: coding-style fix]
Reviewed-by: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zonelists: handle a node zonelist with no applicable entries

When booting 2.6.26-rc3 on a multi-node x86_32 numa system we are seeing
panics when trying node local allocations:

 BUG: unable to handle kernel NULL pointer dereference at 0000034c
 IP: [<c1042507>] get_page_from_freelist+0x4a/0x18e
 *pdpt = 00000000013a7001 *pde = 0000000000000000
 Oops: 0000 [#1] SMP
 Modules linked in:

 Pid: 0, comm: swapper Not tainted (2.6.26-rc3-00003-g5abc28d #82)
 EIP: 0060:[<c1042507>] EFLAGS: 00010282 CPU: 0
 EIP is at get_page_from_freelist+0x4a/0x18e
 EAX: c1371ed8 EBX: 00000000 ECX: 00000000 EDX: 00000000
 ESI: f7801180 EDI: 00000000 EBP: 00000000 ESP: c1371ec0
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
 Process swapper (pid: 0, ti=c1370000 task=c12f5b40 task.ti=c1370000)
 Stack: 00000000 00000000 00000000 00000000 000612d0 000412d0 00000000 000412d0
        f7801180 f7c0101c f7c01018 c10426e4 f7c01018 00000001 00000044 00000000
        00000001 c12f5b40 00000001 00000010 00000000 000412d0 00000286 000412d0
 Call Trace:
  [<c10426e4>] __alloc_pages_internal+0x99/0x378
  [<c10429ca>] __alloc_pages+0x7/0x9
  [<c105e0e8>] kmem_getpages+0x66/0xef
  [<c105ec55>] cache_grow+0x8f/0x123
  [<c105f117>] ____cache_alloc_node+0xb9/0xe4
  [<c105f427>] kmem_cache_alloc_node+0x92/0xd2
  [<c122118c>] setup_cpu_cache+0xaf/0x177
  [<c105e6ca>] kmem_cache_create+0x2c8/0x353
  [<c13853af>] kmem_cache_init+0x1ce/0x3ad
  [<c13755c5>] start_kernel+0x178/0x1ee

This occurs when we are scanning the zonelists looking for a ZONE_NORMAL
page.  In this system there is only ZONE_DMA and ZONE_NORMAL memory on
node 0, all other nodes are mapped above 4GB physical.  Here is a dump
of the zonelists from this system:

    zonelists pgdat=c1400000
     0: c14006c0:2 f7c006c0:2 f7e006c0:2 c1400360:1 c1400000:0
     1: c14006c0:2 c1400360:1 c1400000:0
    zonelists pgdat=f7c00000
     0: f7c006c0:2 f7e006c0:2 c14006c0:2 c1400360:1 c1400000:0
     1: f7c006c0:2
    zonelists pgdat=f7e00000
     0: f7e006c0:2 c14006c0:2 f7c006c0:2 c1400360:1 c1400000:0
     1: f7e006c0:2

When performing a node local allocation we call get_page_from_freelist()
looking for a page.  It in turn calls first_zones_zonelist() which returns
a preferred_zone.  Where there are no applicable zones this will be NULL.
However we use this unconditionally, leading to this panic.

Where there are no applicable zones there is no possibility of a successful
allocation, so simply fail the allocation.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: fix enable_irq_wake/disable_irq_wake imbalance in serial_core.c

enable_irq_wake() and disable_irq_wake() need to be balanced.  However,
serial_core.c calls these for different conditions during the suspend and
resume functions...

This is causing a regular WARN_ON() as found at
http://www.kerneloops.org/search.php?search=set_irq_wake

This patch makes the conditions for triggering the _wake enable/disable
sequence identical.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: proc_get_inode() should get module only once

Any file under /proc/net opened more than once leaked the refcounter
on the module it belongs to.

The problem is that module_get is called for each file opening while
module_put is called only when /proc inode is destroyed. So, lets put
module counter if we are dealing with already initialised inode.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10737

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: David Miller <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Robert Olsson <robert.olsson@its.uu.se>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Roland Kletzing <devzero@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

brd: don't show ramdisks in /proc/partitions

In 2.6.25, ramdisk devices show up in /proc/partitions, which is a
behaviour change from the old rd.c.  Add GENHD_FL_SUPPRESS_PARTITION_INFO,
which was present in rd.c.

All kernels prior to 2.6.25 weren't displaying ramdisks in
/proc/partitions.  Since there are many userspace tools using information
from /proc/partitions some of them may now behave incorrectly (I didn't
tested any though).  For example before 2.6.25 /proc/partitions was empty
if no block devices like hard disks and such were detected by kernel.  Now
all 16 ramdisks are always visible there.  Some software may rely on such
information (I mean, on empty /proc/partitions).

There was quite similar situation back in 2004, and ramdisks were excluded
back from displaying.  Thats why I called this a regression (maybe a bit
unfortunate).  See this patch for info:
http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3-rc2/2.6.3-rc2-mm1/broken-out/nbd-proc-partitions-fix.patch

I also think that someone somewhere (long time ago) excluded ramdisks from
/proc/partitions for good reasons.  It is possible that now such new
"feature" is harmless, but I think there are more chances that someone
will say "hey, /proc/partitions has changed, now my software doesn't work"
then "hey where did my new 2.6.25 feature go".  nbd devices are also
excluded, maybe for very same (unknown to me) reasons.

Signed-off-by: Marcin Krol <hawk@pld-linux.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ip2: fix crashes on load/unload

This doesn't need to be two modules, and making it one cleans up the
problem

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpiolib: fix off by one errors

The last gpio belonging to a chip is chip->base + chip->ngpios - 1.  Some
places in the code, but not all, forgot the critical minus one.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: mcp23s08 debug fix

The return value of mcp23s08_read_regs() can only be evaluated when signed

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: pca953x driver handles pca9554 too

Teach drivers/gpio/pca953x.c about PCA9554, another compatible chip.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signals: fix sigqueue_free() vs __exit_signal() race

__exit_signal() does flush_sigqueue(tsk->pending) outside of ->siglock.
This can race with another thread doing sigqueue_free(), we can free the
same SIGQUEUE_PREALLOC sigqueue twice or corrupt the pending->list.

Note that even sys_exit_group() can trigger this race, not only
sys_timer_delete().

Move the callsite of flush_sigqueue(tsk->pending) under ->siglock.

This patch doesn't touch flush_sigqueue(->shared_pending) below, it is
called when there are no other threads which can play with signals, and
sigqueue_free() can't be used outside of our thread group.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: restart recovery cleanly after device failure.

When we get any IO error during a recovery (rebuilding a spare), we abort
the recovery and restart it.

For RAID6 (and multi-drive RAID1) it may not be best to restart at the
beginning: when multiple failures can be tolerated, the recovery may be
able to continue and re-doing all that has already been done doesn't make
sense.

We already have the infrastructure to record where a recovery is up to
and restart from there, but it is not being used properly.
This is because:
  - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR,
    which causes the recovery not be be checkpointed.
  - We remove spares and then re-added them which loses important state
    information.

The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't
needed.  If there is an error, the relevant drive will be marked as
Faulty, and that is enough to ensure correct handling of the error.  So we
first remove MD_RECOVERY_ERR, changing some of the uses of it to
MD_RECOVERY_INTR.

Then we cause the attempt to remove a non-faulty device from an array to
fail (unless recovery is impossible as the array is too degraded).  Then
when remove_and_add_spares attempts to remove the devices on which
recovery can continue, it will fail, they will remain in place, and
recovery will continue on them as desired.

Issue:  If we are halfway through rebuilding a spare and another drive
fails, and a new spare is immediately available,  do we want to:
 1/ complete the current rebuild, then go back and rebuild the new spare or
 2/ restart the rebuild from the start and rebuild both devices in
    parallel.

Both options can be argued for.  The code currently takes option 2 as
  a/ this requires least code change
  b/ this results in a minimally-degraded array in minimal time.

Cc: "Eivind Sarto" <ivan@kasenna.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: allow parallel resync of md-devices.

In some configurations, a raid6 resync can be limited by CPU speed
(Calculating P and Q and moving data) rather than by device speed.  In
these cases there is nothing to be gained byt serialising resync of arrays
that share a device, and doing the resync in parallel can provide benefit.
 So add a sysfs tunable to flag an array as being allowed to resync in
parallel with other arrays that use (a different part of) the same device.

Signed-off-by: Bernd Schubert <bs@q-leap.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: notify userspace on 'stop' events

This additional notification to 'array_state' is needed to allow the
monitor application to learn about stop events via sysfs.  The
sysfs_notify("sync_action") call that comes at the end of do_md_stop()
(via md_new_event) is insufficient since the 'sync_action' attribute has
been removed by this point.

(Seems like a sysfs-notify-on-removal patch is a better fix.  Currently
removal updates the event count but does not wake up waiters)

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: notify userspace on 'write-pending' changes to array_state

When an array enters write pending, 'array_state' changes, so we must be
sure to sysfs_notify.

Also, when waiting for user-space to acknowledge 'write-pending' by
marking the metadata as dirty, we don't want to wait for MD_CHANGE_DEVS to
be cleared as that might not happen.  So explicity test for the bits that
we are really interested in.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: raid1: Fix restoration of bio between failed read and write.

When performing a "recovery" or "check" pass on a RAID1 array, we read
from each device and possible, if there is a difference or a read error,
write back to some devices.

We use the same 'bio' for both read and write, resetting various fields
between the two operations.

We forgot to reset bv_offset and bv_len however.  These are often left
unchanged, but in the case where there is an IO error one or two sectors
into a page, they are changed.

This results in correctable errors not being corrected properly.  It does
not result in any data corruption.

Cc: "Fairbanks, David" <David.Fairbanks@stratus.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: md: raid5 rate limit error printk

Last night we had scsi problems and a hardware raid unit was offlined
during heavy i/o.  While this happened we got for about 3 minutes a huge
number messages like these

Apr 12 03:36:07 pfs1n14 kernel: [197510.696595] raid5:md7: read error not correctable (sector 2993096568 on sdj2).

I guess the high error rate is responsible for not scheduling other events
- during this time the system was not pingable and in the end also other
devices run into scsi command timeouts causing problems on these unrelated
devices as well.

Signed-off-by: Bernd Schubert <bernd-schubert@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: kill file_path wrapper

Kill the trivial and rather pointless file_path wrapper around d_path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: proper extern for mdp_major

This patch adds a proper extern for mdp_major in include/linux/raid/md.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: fix possible oops when removing a bitmap from an active array

It is possible to add a write-intent bitmap to an active array, or remove
the bitmap that is there.

When we do with the 'quiesce' the array, which causes make_request to
block in "wait_barrier()".

However we are sampling the value of "mddev->bitmap" before the
wait_barrier call, and using it afterwards.  This can result in using a
bitmap structure that has been freed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix atomic_t overflow in vm

The atomic_t type is 32bit but a 64bit system can have more than 2^32
pages of virtual address space available.  Without this we overflow on
ludicrously large mappings

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

types.h: don't expose struct ustat to userspace

<linux/types.h> can't be used together with <sys/ustat.h> because they
both define struct ustat:

    $ cat test.c
    #include <sys/ustat.h>
    #include <linux/types.h>
    $ gcc -c test.c
    In file included from test.c:2:
    /usr/include/linux/types.h:165: error: redefinition of 'struct ustat'

has been reported a while ago to debian, but seems to have been
lost in cat fighting: http://bugs.debian.org/429064

Signed-off-by: maximilian attems <max@stro.at>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: support for InstaShield IS-400 four port RS-232 PCI card

Add support for the InstaShield IS-400 four port RS-232 PCI card.

Signed-off-by: Ignacio García Pérez <iggarpe@t2i.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix parenthesis in include/asm-mips/mach-au1x00/au1000.h

Parenthesis fix in include/asm-mips/mach-au1x00/au1000.h

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix parenthesis in include/asm-mips/gic.h

Parenthesis fix in include/asm-mips/gic.h

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ibmaem: new driver for power/energy/temp meters in IBM System X hardware

This driver reads IBM Active Energy Manager energy/temperature/power
sensors on IBM System X hardware.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i5k_amb: support Intel 5400 chipset

Minor rework to support the Intel 5400 chipset.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hdaps: invert the axes for HDAPS on Lenovo R61i ThinkPads

Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jiri Kosina <jikos@jikos.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntfs: le*_add_cpu conversion

replace all:
little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
expression_in_cpu_byteorder);
with:
leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: don't drop a partial page in a zone's memory map size

In a zone's present pages number, account for all pages occupied by the
memory map, including a partial.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add util-linux-ng package

(akpm: we often deal with util-linux and I (at least) can never remember
where they hang out).

Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ecryptfs: fix missed mutex_unlock

Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: fix bdi naming conflict

Fuse allocates a separate bdi for each filesystem, and registers them
in sysfs with "MAJOR:MINOR" of sb->s_dev (st_dev).  This works fine for
anon devices normally used by fuse, but can conflict with an already
registered BDI for "fuseblk" filesystems, where sb->s_dev represents a
real block device.  In particularl this happens if a non-partitioned
device is being mounted.

Fix by registering with a different name for "fuseblk" filesystems.

Thanks to Ioan Ionita for the bug report.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Ioan Ionita <opslynx@gmail.com>
Tested-by: Ioan Ionita <opslynx@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: allow pfnmap ->fault()s

Take out an assertion to allow ->fault handlers to service PFNMAP regions.
This is required to reimplement .nopfn handlers with .fault handlers and
subsequently remove nopfn.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Jes Sorensen <jes@sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ALSA] hda - Added support for Foxconn P35AX-S mainboard

Added IDs for the Foxconn P35AX-S mainboard to patch_realtek.c, so
that ALC883_6ST_DIG is used by default.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Fix COEF and EAPD in ALC889 auto-configuration mode

Fix the missing COEF and EAPD initialization in ALC889 auto-configuration
mode.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Fix noise on VT1708 codec

We get quite noisy output on the right channel on VT1708 codec
when 24bit samples are used.  Suppress the 24bit support until any
real fix is found.
https://bugzilla.novell.com/show_bug.cgi?id=390473

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Add model for ASUS P5K-E/WIFI-AP

Added a config table entry for the ASUS P5K-E/WIFI-AP mainboard (ID
1043:8227) to use AD1988_6STACK_DIG

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ARM] integrator: fix build warnings and errors

Fix resource_size_t warning in impd1.c, and printascii() build
errors in pci_v3.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mad: Fix kernel crash when .process_mad() returns SUCCESS|CONSUMED
  IPoIB: Test for NULL broadcast object in ipiob_mcast_join_finish()
  MAINTAINERS: Add cxgb3 and iw_cxgb3 NIC and iWARP driver entries
  IB/mlx4: Fix creation of kernel QP with max number of send s/g entries
  IB/mthca: Fix max_sge value returned by query_device
  RDMA/cxgb3: Fix uninitialized variable warning in iwch_post_send()
  IB/mlx4: Fix uninitialized-var warning in mlx4_ib_post_send()
  IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediate
  IB/ipath: Fix printk format for ipath_sdma_status

IB/mad: Fix kernel crash when .process_mad() returns SUCCESS|CONSUMED

If a low-level driver returns IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED,
handle_outgoing_dr_smp() doesn't clean up properly.  The fix is to
kfree the local data and break, rather than falling through.  This was
observed with the ipath driver, but could happen with any driver.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1027>.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] clarify license of freq_table.c
  [CPUFREQ] Remove documentation of removed ondemand tunable.
  [CPUFREQ] Crusoe: longrun cpufreq module reports false min freq
  [CPUFREQ] powernow-k8: improve error messages

x86: prevent PGE flush from interruption/preemption

CR4 manipulation is not protected against interrupts and preemption,
but KVM uses smp_function_call to manipulate the X86_CR4_VMXE bit
either from the CPU hotplug code or from the kvm_init call.

We need to protect the CR4 manipulation from both interrupts and
preemption.

Original bug report: http://lkml.org/lkml/2008/5/7/48
Bugzilla entry: http://bugzilla.kernel.org/show_bug.cgi?id=10642

This is not a regression from 2.6.25, it's a long standing and hard to
trigger bug.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

remove debug printk from DRM suspend path

Not sure how this snuck upstream, but it really doesn't belong there.  We
don't need a KERN_ERR printk in the suspend path to know what's going on (at
least not anymore).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] iSeries: Remove unused mail address
  [POWERPC] mpic: Fix use of uninitialized variable
  [POWERPC] Add kernstart_addr to list of allowed symbols in prom_init
  [POWERPC] Fix __set_fixmap() for STRICT_MM_TYPECHECKS
  [POWERPC] PS3: Fix memory hotplug

Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Fix memory corruption with small buffer reads
  [XFS] Fix inode list allocation size in writeback.
  [XFS] Don't allow memory reclaim to wait on the filesystem in inode
  [XFS] Fix fsync() b0rkage.
  [XFS] Include linux/random.h in all builds, not just debug builds.

Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  stop_machine: make stop_machine_run more virtualization friendly
  doc: add a chapter about trylock functions [Bug 9011]
  modules: proper cleanup of kobject without CONFIG_SYSFS
  module loading ELF handling: use SELFMAG instead of numeric constant

fbdev: fix integer as NULL pointer warning

drivers/video/aty/atyfb_base.c:3359:26: warning: Using plain integer as NULL pointer
drivers/video/aty/radeon_base.c:2280:32: warning: Using plain integer as NULL pointer
drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer
drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer
drivers/video/sis/sis_main.c:5790:44: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scsi: fix integer as NULL pointer warning

drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer
drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer
drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer
drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer
drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer
drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer
drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer
drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer
drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer
drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer
drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer
drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer
drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isdn: fix integer as NULL pointer warning

drivers/isdn/hysdn/hycapi.c:465:42: warning: Using plain integer as NULL pointer
drivers/isdn/hysdn/hycapi.c:467:44: warning: Using plain integer as NULL pointer
drivers/isdn/hysdn/hycapi.c:469:42: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

acpi: fix integer as NULL pointer warning

drivers/acpi/dispatcher/dsmethod.c:568:50: warning: Using plain integer as NULL pointer
drivers/acpi/executer/exmutex.c:329:30: warning: Using plain integer as NULL pointer
drivers/acpi/executer/exmutex.c:466:31: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: fix integer as NULL pointer warning

arch/x86/boot/printf.c:59:10: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ARM] fix OMAP include loops

OMAP has two include loops in its header files:

  asm-arm/hardware.h <- asm-arm/arch-omap/io.h <-
   asm-arm/arch-omap/hardware.h <- asm-arm/hardware.h

  asm-arm/arch-omap/board-palmte.h <-
   asm-arm/arch-omap/hardware.h <- asm-arm/hardware.h <-
   asm-arm/arch-omap/gpio.h <- asm-arm/arch-omap/board-palmte.h

Circular include dependencies are dangerous since they can result in
inconsistent definitions being provided to other code, especially if
'#ifndef' constructs are used.

Solve these by removing the offending includes, and add additional
includes where necessary.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Revert "[ARM] pxa: spitz wants PXA27x UDC definitions"

This reverts commit 53491e042e79578765e2d33512a45d50eb0d8801, which hit
the kernel tree too early.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5053/1: define before use of processor_id

For the simple read_cpuid() macro case the variable processor_id has
no definition on use of the macro. Add an extern for it. Move all the
processor ID macros into the #ifndef __ASSEMBLEY__ block.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5052/1: export clock functions for the at91x40

Export the AT91 clock functions for the AT91X40. Some external code common
to all AT91 family parts relys on this, like the gpio and serial support.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5051/1: define pgtable_t for the !CONFIG_MMU case too

The non-MMU case also needs the type definition of pgtable_t.
So move it out of a CONFIG_MMU conditional section.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

x86: use explicit copy in vdso_gettimeofday()

Jeremy's gcc 3.4 seems to be unable to inline a 8 byte memcpy.  But the
vdso doesn't support external references.  Copy the structure members
of struct timezone explicitely instead.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

namespacecheck: automated fixes

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/xen: fix arbitrary_virt_to_machine()

While I realize that the function isn't currently being used, I still
think an obvious mistake like this should be corrected.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: don't read maxlvt before checking if APIC is mapped

A check for unmapped apic was added before reading maxlvt but the early
read of maxlvt wasn't removed.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

x86: disable TSC for sched_clock() when calibration failed

When the TSC calibration fails then TSC is still used in
sched_clock(). Disable it completely in that case.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

x86: distangle user disabled TSC from unstable

tsc_enabled is set to 0 from the command line switch "notsc" and from
the mark_tsc_unstable code. Seperate those functionalities and replace
tsc_enable with tsc_disable. This makes also the native_sched_clock()
decision when to use TSC understandable.

Preparatory patch to solve the sched_clock() issue on 32 bit.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: fix setup of cyc2ns in tsc_64.c

When the TSC is calibrated against the PIT due to the nonavailability
of PMTIMER/HPET or due to SMI interference then the setup of the per
CPU cyc2ns variables is skipped. This is unlikely to happen but it
would definitely render sched_clock() unusable.

This was introduced with commit 53d517cdbaac704352b3d0c10fecb99e0b54572e

    x86: scale cyc_2_nsec according to CPU frequency

Update the per CPU cyc2ns variables in all exit pathes of tsc_calibrate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

[XFS] Fix memory corruption with small buffer reads

When we have multiple buffers in a single page for a blocksize == pagesize
filesystem we might overwrite the page contents if two callers hit it
shortly after each other. To prevent that we need to keep the page locked
until I/O is completed and the page marked uptodate.

Thanks to Eric Sandeen for triaging this bug and finding a reproducible
testcase and Dave Chinner for additional advice.

This should fix kernel.org bz #10421.

Tested-by: Eric Sandeen <sandeen@sandeen.net>
SGI-PV: 981813
SGI-Modid: xfs-linux-melb:xfs-kern:31173a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

[POWERPC] iSeries: Remove unused mail address

I don't use my IBM email address normally and people can find me in
CREDITS.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] mpic: Fix use of uninitialized variable

Compiling ppc64_defconfig with gcc 4.3 gives thes warnings:

arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_get_priority':
arch/powerpc/sysdev/mpic.c:1351: warning: 'is_ipi' may be used uninitialized in this function
arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_set_priority':
arch/powerpc/sysdev/mpic.c:1328: warning: 'is_ipi' may be used uninitialized in this function

It turns out that in the cases where is_ipi is uninitialized, another
variable (mpic) will be NULL and it is dereferenced.  Protect against
this by returning if mpic is NULL in mpic_irq_set_priority, and removing
mpic_irq_get_priority completely as it has no in tree callers.

This has the nice side effect of making the warning go away.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add kernstart_addr to list of allowed symbols in prom_init

Since commit "85xx: Add support for relocatable kernel (and
booting at non-zero)" (37dd2badcfcec35f5e21a0926968d77a404f03c3),
PHYSICAL_START is #defined as kernstart_addr if RELOCATABLE
and FLATMEM is enabled.

PHYSICAL_START is used in prom_init.c and so kernstart_addr
needs to be added to the list of allowed symbols that
prom_init.c can access.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix __set_fixmap() for STRICT_MM_TYPECHECKS

__set_fixmap() in pgtable_32.c currently fails to compile if
STRICT_MM_TYPECHECKS is defined.  This fixes it.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Fix memory hotplug

A change was made to walk_memory_resource() in commit
4b119e21d0c66c22e8ca03df05d9de623d0eb50f that added a
check of find_lmb().  Add the coresponding lmb_add()
call to ps3_mm_add_memory() so that that check will
succeed.

This fixes the condition where the PS3 boots up with
only the 128 MiB of boot memory, and doesn't see the
other 128MiB that is available.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[XFS] Fix inode list allocation size in writeback.

We only need to allocate space for the number of inodes in the cluster
when writing back inodes, not every byte in the inode cluster. This
reduces the amount of memory needing to be allocated to 256 bytes instead
of 64k.

SGI-PV: 981949
SGI-Modid: xfs-linux-melb:xfs-kern:31182a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

[XFS] Don't allow memory reclaim to wait on the filesystem in inode
writeback

If we allow memory reclaim to wait on the pages under writeback in inode
cluster writeback we could deadlock because we are currently holding the
ILOCK on the initial writeback inode which is needed in data I/O
completion to change the file size or do unwritten extent conversion
before the pages are taken out of writeback state.

SGI-PV: 981091
SGI-Modid: xfs-linux-melb:xfs-kern:31015a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

[XFS] Fix fsync() b0rkage.

xfs_fsync() fails to wait for data I/O completion before checking if the
inode is dirty or clean to decide whether to log the inode or not. This
misses inode size updates when the data flushed by the fsync() is
extending the file.

Hence, like fdatasync(), we need to wait for I/o completion first, then
check the inode for cleanliness. Doing so makes the behaviour of
xfs_fsync() identical for fsync and fdatasync and we *always* use
synchronous semantics if the inode is dirty. Therefore also kill the
differences and remove the unused flags from the xfs_fsync function and
callers.

SGI-PV: 981296
SGI-Modid: xfs-linux-melb:xfs-kern:31033a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

Merge git://git./linux/kernel/git/torvalds/linux-2.6 into for-linus

stop_machine: make stop_machine_run more virtualization friendly

On kvm I have seen some rare hangs in stop_machine when I used more guest
cpus than hosts cpus. e.g. 32 guest cpus on 1 host cpu triggered the
hang quite often. I could also reproduce the problem on a 4 way z/VM host with
a 64 way guest.

It turned out that the guest was consuming all available cpus mostly for
spinning on scheduler locks like rq->lock. This is expected as the threads are
calling yield all the time.
The problem is now, that the host scheduling decisings together with the guest
scheduling decisions and spinlocks not being fair managed to create an
interesting scenario similar to a live lock. (Sometimes the hang resolved
itself after some minutes)

Changing stop_machine to yield the cpu to the hypervisor when yielding inside
the guest fixed the problem for me. While I am not completely happy with this
patch, I think it causes no harm and it really improves the situation for me.

I used cpu_relax for yielding to the hypervisor, does that work on all
architectures?

p.s.: If you want to reproduce the problem, cpu hotplug and kprobes use
stop_machine_run and both triggered the problem after some retries.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

doc: add a chapter about trylock functions [Bug 9011]

Add a chapter about trylock functions.
http://bugzilla.kernel.org/show_bug.cgi?id=9011

Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed down_trylock)

modules: proper cleanup of kobject without CONFIG_SYSFS

kobject: '<NULL>' (ffffffffa0104050): is not initialized, yet kobject_put() is being called.
------------[ cut here ]------------
WARNING: at /home/den/src/linux-netns26/lib/kobject.c:583 kobject_put+0x53/0x55()
Modules linked in: ipv6 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ide_cd_mod cdrom button [last unloaded: pktgen]
comm: rmmod Tainted: G        W 2.6.26-rc3 #585
Call Trace:
  [<ffffffff802359ab>] warn_on_slowpath+0x58/0x7a
  [<ffffffff80236aca>] ? printk+0x67/0x69
  [<ffffffff80236aca>] ? printk+0x67/0x69
  [<ffffffff80324289>] kobject_put+0x53/0x55
  [<ffffffff8025e2ee>] free_module+0x87/0xfa
  [<ffffffff8025fee5>] sys_delete_module+0x178/0x1e1
  [<ffffffff804b1e70>] ? lockdep_sys_exit_thunk+0x35/0x67
  [<ffffffff804b1dff>] ? trace_hardirqs_on_thunk+0x35/0x3a
  [<ffffffff8020c0bb>] system_call_after_swapgs+0x7b/0x80
---[ end trace 8f5aafa7f6406cf8 ]---

mod->mkobj.kobj is not initialized without CONFIG_SYSFS. Do not call
kobject_put in this case.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

module loading ELF handling: use SELFMAG instead of numeric constant

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

[CPUFREQ] clarify license of freq_table.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

[ARM] omap: fix omap clk support build errors

arch/arm/plat-omap/clock.c:397: warning: "struct cpufreq_frequency_table" declared inside parameter list
arch/arm/plat-omap/clock.c:397: warning: its scope is only this definition or declaration, which is probably not what you want
arch/arm/plat-omap/clock.c: In function `clk_init_cpufreq_table':
arch/arm/plat-omap/clock.c:402: error: structure has no member named `clk_init_cpufreq_table'
arch/arm/plat-omap/clock.c:403: error: structure has no member named `clk_init_cpufreq_table'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix reversed memset arguments
  Adds username in the upcall key for unattended mounts with keytab
  [CIFS] Remove redundant NULL check

[CIFS] Fix reversed memset arguments

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Adds username in the upcall key for unattended mounts with keytab

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

[ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X.

Rename the SDI device if on an S3C2440 or S3C2442.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>