Scott Wood [Tue, 14 Aug 2007 16:37:14 +0000 (18:37 +0200)]
i2c-mpc: Pass correct dev_id to free_irq on error path
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Tue, 14 Aug 2007 16:37:13 +0000 (18:37 +0200)]
i2c-i801: Typo: erroneous
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Linus Torvalds [Tue, 14 Aug 2007 16:31:19 +0000 (09:31 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[IPVS]: Use IP_VS_WAIT_WHILE when encessary.
[NET]: Share correct feature code between bridging and bonding
[ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc
[IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]alloc
[WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzalloc
[DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm()
[DCCP]: fix theoretical ccids_{read,write}_lock() race
[XFRM]: Clean up duplicate includes in net/xfrm/
[TIPC]: Clean up duplicate includes in net/tipc/
[SUNRPC]: Clean up duplicate includes in net/sunrpc/
[PKT_SCHED]: Clean up duplicate includes in net/sched/
[IPV6]: Clean up duplicate includes in net/ipv6/
[IPV4]: Clean up duplicate includes in net/ipv4/
[ATM]: Clean up duplicate includes in net/atm/
[ATM]: Clean up duplicate includes in drivers/atm/
[IPCONFIG]: ip_auto_config fix
[ATM]: fore200e_param_bs_queue() must be __devinit
Linus Torvalds [Tue, 14 Aug 2007 16:30:42 +0000 (09:30 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
e1000: Add device IDs of new 82571 board variants
xen-netfront: Avoid deref'ing skbafter it is potentially freed.
3c59x maintainer
3c59x: fix duplex configuration
natsemi: fix netdev error acounting
ax88796 printk fixes
myri10ge: Use the pause counter to avoid a needless device reset
via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA access
Steven Whitehouse [Thu, 19 Jul 2007 15:12:50 +0000 (16:12 +0100)]
[GFS2] Revert remounting w/o acl option leaves acls enabled
This reverts commit
569a7b6c2e8965ff4908003b925757703a3d649c. The
code was correct originally. The default setting for ACLs after a
remount should be to be the same as before the remount.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse [Wed, 18 Jul 2007 10:40:06 +0000 (11:40 +0100)]
[GFS2] Fix setting of inherit jdata attr
Due to a mix up between the jdata attribute and inherit jdata attribute
it has not been possible to set the inherit jdata attribute on
directories. This is now fixed and the ioctl will report the inherit
jdata attribute for directories rather than the jdata attribute as it
did previously. This stems from our need to have the one bit in the
ioctl attr flags mean two different things according to whether the
underlying inode is a directory or not.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse [Tue, 17 Jul 2007 09:29:02 +0000 (10:29 +0100)]
[GFS2] Fix incorrect error path in prepare_write()
The error path in prepare_write() was incorrect in the (very rare) event
that the transaction fails to start. The following prevents a NULL
pointer dereference,
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse [Tue, 17 Jul 2007 09:26:56 +0000 (10:26 +0100)]
[GFS2] Fix incorrect return code in rgrp.c
The following patch fixes a bug where 0 was being used as a return code
to indicate "nothing to do" when in fact 0 was a valid block location
which might be returned by the function.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Thu, 12 Jul 2007 21:58:50 +0000 (16:58 -0500)]
[GFS2] soft lockup in rgblk_search
This patch seems to fix the problem described in bugzilla bug 246114.
It was written by Steve Whitehouse with some tweaking by me.
The code was looping in the relatively new section of code designed to
search for and reuse unlinked inodes. In cases where it was finding an
appropriate inode to reuse, it was looping around and finding the same
block over and over because a "<=" check should have been a "<" when
comparing the goal block to the last unlinked block found.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Wed, 11 Jul 2007 20:55:23 +0000 (15:55 -0500)]
[GFS2] soft lockup detected in databuf_lo_before_commit
This is part 2 of the patch for bug #245832, part 1 of which is already
in the git tree.
The problem was that sdp->sd_log_num_databuf was not always being
protected by the gfs2_log_lock spinlock, but the sd_log_le_databuf
(which it is supposed to reflect) was protected. That meant there
was a timing window during which gfs2_log_flush called
databuf_lo_before_commit and the count didn't match what was
really on the linked list in that window. So when it ran out of
items on the linked list, it decremented total_dbuf from 0 to -1 and
thus never left the "while(total_dbuf)" loop.
The solution is to protect the variable sdp->sd_log_num_databuf so
that the value will always match the contents of the linked list,
and therefore the number will never go negative, and therefore, the
loop will be exited properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
David Teigland [Tue, 7 Aug 2007 14:44:48 +0000 (09:44 -0500)]
[DLM] fix basts for granted PR waiting CW
Fix a long standing bug where a blocking callback would be missed
when there's a granted lock in PR mode and waiting locks in both
PR and CW modes (and the PR lock was added to the waiting queue
before the CW lock). The logic simply compared the numerical values
of the modes to determine if a blocking callback was required, but in
the one case of PR and CW, the lower valued CW mode blocks the higher
valued PR mode. We just need to add a special check for this PR/CW
case in the tests that decide when a blocking callback is needed.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Patrick Caulfield [Thu, 2 Aug 2007 13:58:14 +0000 (14:58 +0100)]
[DLM] More othercon fixes
The last patch to clean out 'othercon' structures only fixed half the problem.
The attached addresses the other situations too, and fixes bz#238490
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Jesper Juhl [Wed, 18 Jul 2007 22:27:43 +0000 (00:27 +0200)]
[DLM] Fix memory leak in dlm_add_member() when dlm_node_weight() returns less than zero
There's a memory leak in fs/dlm/member.c::dlm_add_member().
If "dlm_node_weight(ls->ls_name, nodeid)" returns < 0, then
we'll return without freeing the memory allocated to the (at
that point yet unused) 'memb'.
This patch frees the allocated memory in that case and thus
avoids the leak.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Patrick Caulfield [Tue, 17 Jul 2007 15:53:15 +0000 (16:53 +0100)]
[DLM] zero unused parts of sockaddr_storage
When we build a sockaddr_storage for an IP address, clear the unused parts as
they could be used for node comparisons.
I have seen this occasionally make sctp connections fail.
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
David Teigland [Fri, 13 Jul 2007 19:49:06 +0000 (14:49 -0500)]
[DLM] fix NULL ls usage
Fix regression in recent patch "[DLM] variable allocation" which
attempts to dereference an "ls" struct when it's NULL.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Patrick Caulfield [Wed, 11 Jul 2007 12:39:43 +0000 (13:39 +0100)]
[DLM] Clear othercon pointers when a connection is closed
This patch clears the othercon pointer and frees the memory when a connnection
is closed. This could cause a small memory leak when nodes leave the cluster.
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Auke Kok [Thu, 9 Aug 2007 21:09:34 +0000 (14:09 -0700)]
e1000: Add device IDs of new 82571 board variants
This patch adds support for 2 new board variants:
- A Quad port fiber 82571 board
- A blade version of the 82571 quad copper board
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Heiko Carstens [Fri, 10 Aug 2007 22:50:30 +0000 (15:50 -0700)]
[IPVS]: Use IP_VS_WAIT_WHILE when encessary.
For architectures that don't have a volatile atomic_ts constructs like
while (atomic_read(&something)); might result in endless loops since a
barrier() is missing which forces the compiler to generate code that
actually reads memory contents.
Fix this in ipvs by using the IP_VS_WAIT_WHILE macro which resolves to
while (expr) { cpu_relax(); }
(why isn't this open coded btw?)
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 10 Aug 2007 22:47:58 +0000 (15:47 -0700)]
[NET]: Share correct feature code between bridging and bonding
http://bugzilla.kernel.org/show_bug.cgi?id=8797 shows that the
bonding driver may produce bogus combinations of the checksum
flags and SG/TSO.
For example, if you bond devices with NETIF_F_HW_CSUM and
NETIF_F_IP_CSUM you'll end up with a bonding device that
has neither flag set. If both have TSO then this produces
an illegal combination.
The bridge device on the other hand has the correct code to
deal with this.
In fact, the same code can be used for both. So this patch
moves that logic into net/core/dev.c and uses it for both
bonding and bridging.
In the process I've made small adjustments such as only
setting GSO_ROBUST if at least one constituent device
supports it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mariusz Kozlowski [Fri, 10 Aug 2007 22:26:18 +0000 (15:26 -0700)]
[ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc
drivers/atm/iphase.c | 111508 -> 111431 (-77 bytes)
drivers/atm/iphase.o | 254740 -> 254260 (-480 bytes)
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mariusz Kozlowski [Fri, 10 Aug 2007 22:25:40 +0000 (15:25 -0700)]
[IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]alloc
drivers/net/irda/irda-usb.c | 59694 -> 59541 (-153 bytes)
drivers/net/irda/irda-usb.o | 170588 -> 169256 (-1332 bytes)
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mariusz Kozlowski [Fri, 10 Aug 2007 22:24:50 +0000 (15:24 -0700)]
[WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzalloc
drivers/net/wan/hdlc_fr.c | 31260 -> 31223 (-37 bytes)
drivers/net/wan/hdlc_fr.o | 144872 -> 144728 (-144 bytes)
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jesper Juhl [Fri, 10 Aug 2007 22:23:54 +0000 (15:23 -0700)]
[DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm()
There's a memory leak in net/dccp/feat.c::dccp_feat_empty_confirm(). If we
hit the 'default:' case of the 'switch' statement, then we return without
freeing 'opt', thus leaking 'struct dccp_opt_pend' bytes.
The leak is fixed easily enough by adding a kfree(opt); before the return
statement.
The patch also changes the layout of the 'switch' to be more in line with
CodingStyle.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleg Nesterov [Fri, 10 Aug 2007 22:21:17 +0000 (15:21 -0700)]
[DCCP]: fix theoretical ccids_{read,write}_lock() race
Make sure that spin_unlock_wait() is properly ordered wrt atomic_inc().
(akpm: can't we convert this code to use rwlocks?)
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:20:21 +0000 (15:20 -0700)]
[XFRM]: Clean up duplicate includes in net/xfrm/
This patch cleans up duplicate includes in
net/xfrm/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:19:43 +0000 (15:19 -0700)]
[TIPC]: Clean up duplicate includes in net/tipc/
This patch cleans up duplicate includes in
net/tipc/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:19:09 +0000 (15:19 -0700)]
[SUNRPC]: Clean up duplicate includes in net/sunrpc/
This patch cleans up duplicate includes in
net/sunrpc/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:18:31 +0000 (15:18 -0700)]
[PKT_SCHED]: Clean up duplicate includes in net/sched/
This patch cleans up duplicate includes in
net/sched/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:17:58 +0000 (15:17 -0700)]
[IPV6]: Clean up duplicate includes in net/ipv6/
This patch cleans up duplicate includes in
net/ipv6/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:17:24 +0000 (15:17 -0700)]
[IPV4]: Clean up duplicate includes in net/ipv4/
This patch cleans up duplicate includes in
net/ipv4/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:16:42 +0000 (15:16 -0700)]
[ATM]: Clean up duplicate includes in net/atm/
This patch cleans up duplicate includes in
net/atm/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Fri, 10 Aug 2007 22:15:55 +0000 (15:15 -0700)]
[ATM]: Clean up duplicate includes in drivers/atm/
This patch cleans up duplicate includes in
drivers/atm/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Tjernlund [Fri, 10 Aug 2007 22:14:54 +0000 (15:14 -0700)]
[IPCONFIG]: ip_auto_config fix
The following commandline:
root=/dev/mtdblock6 rw rootfstype=jffs2 ip=192.168.1.10:::255.255.255.0:localhost.localdomain:eth1:off console=ttyS0,115200
makes ip_auto_config fall back to DHCP and complain "IP-Config: Incomplete
network configuration information." depending on if CONFIG_IP_PNP_DHCP is
set or not.
The only way I can make ip_auto_config accept my IP config is to add an
entry for the server IP:
ip=192.168.1.10:192.168.1.15::255.255.255.0:localhost.localdomain:eth1:off
I think this is a bug since I am not using a NFS root FS.
The following patch fixes the above problem.
From: Andrew Morton <akpm@linux-foundation.org>
Davem said (in February!):
Well, first of all the change in question is not in 2.4.x either. I just
checked the current 2.4.x GIT tree and the test is exactly:
if (ic_myaddr == INADDR_NONE ||
#ifdef CONFIG_ROOT_NFS
(MAJOR(ROOT_DEV) == UNNAMED_MAJOR
&& root_server_addr == INADDR_NONE
&& ic_servaddr == INADDR_NONE) ||
#endif
ic_first_dev->next) {
which matches 2.6.x
I even checked 2.4.x when it was branched for 2.5.x and the test was the
same at the point in time too.
Looking at the proposed change a bit it appears that it is probably
correct, as it's trying to check that ROOT_DEV is nfs root. But if it is
correct then the UNNAMED_MAJOR comparison in the same code block should be
removed as it becomes superfluous.
I'm happy to apply this patch with that modification made.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Fri, 10 Aug 2007 22:14:18 +0000 (15:14 -0700)]
[ATM]: fore200e_param_bs_queue() must be __devinit
WARNING: drivers/built-in.o(.text+0x6203bb): Section mismatch: reference to .init.text:fore200e_param_bs_queue (between 'fore200e_initialize' and 'fore200e_monitor_putc')
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Fitzhardinge [Mon, 13 Aug 2007 19:54:37 +0000 (12:54 -0700)]
xen-netfront: Avoid deref'ing skbafter it is potentially freed.
xennet_tx_bug_gc can free the skb before we use it, so make sure we don't.
Signed-off-by: Keir Fraser <keir@xensource.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Steffen Klassert [Fri, 10 Aug 2007 21:05:27 +0000 (14:05 -0700)]
3c59x maintainer
Add 3c59x maintainer.
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Steffen Klassert [Fri, 10 Aug 2007 21:05:26 +0000 (14:05 -0700)]
3c59x: fix duplex configuration
A special sequence of ifconfig up/down and plug/unplug the cable can break
the duplex configuration of the driver.
Setting
vp->mii.full_duplex = vp->full_duplex
in vortex_up should fix this.
Addresses Bug 8575 3c59x duplex configuration broken
http://bugzilla.kernel.org/show_bug.cgi?id=8575
Cc: Martin Buck <mb-tmp-ohtmvyyn.xreary.bet@gromit.dyndns.org>
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Cc: Natalie Protasevich <protasnb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Andrew Morton [Fri, 10 Aug 2007 21:05:23 +0000 (14:05 -0700)]
natsemi: fix netdev error acounting
When a detailed netdev error is counted, we also must account for it in the
aggregated error count.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8106
Cc: Tim Hockin <thockin@hockin.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Chongfeng Hu <loveminix@yahoo.com.cn>
Cc: Natalie Protasevich <protasnb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Andrew Morton [Fri, 10 Aug 2007 21:05:21 +0000 (14:05 -0700)]
ax88796 printk fixes
drivers/net/ax88796.c: In function `ax_probe':
drivers/net/ax88796.c:825: warning: size_t format, different type arg (arg 4)
drivers/net/ax88796.c:825: warning: size_t format, different type arg (arg 5)
resource_size_t isn't size_t.
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Brice Goglin [Thu, 9 Aug 2007 07:02:14 +0000 (09:02 +0200)]
myri10ge: Use the pause counter to avoid a needless device reset
Use the pause counter to avoid a needless device reset, and
print a message telling the admin that our link partner is
flow controlling us down to 0 pkts/sec.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Dustin Marquess [Fri, 10 Aug 2007 21:05:15 +0000 (14:05 -0700)]
via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA access
Patch to disable the rx_copybreak feature on hardware architectures that
don't allow unaligned DMA access.
#ifdef code taken from tulip_core.c. Problem pointed out by Ivan
Kokshaysky.
Signed-off-by: Dustin Marquess <jailbird@alcatraz.fdf.net>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Alexey Starikovskiy [Tue, 14 Aug 2007 05:03:42 +0000 (01:03 -0400)]
ACPI: EC: Fix "no battery" regression
Restore deleted call to register query methods.
http://bugzilla.kernel.org/show_bug.cgi?id=8886
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Mon, 13 Aug 2007 04:25:24 +0000 (21:25 -0700)]
Linux 2.6.23-rc3
Linus Torvalds [Sun, 12 Aug 2007 18:06:45 +0000 (11:06 -0700)]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
sched: run_rebalance_domains: s/SCHED_IDLE/CPU_IDLE/
sched: fix sleeper bonus
sched: make global code static
Thomas Gleixner [Sun, 12 Aug 2007 15:46:36 +0000 (15:46 +0000)]
genirq: mark io_apic level interrupts to avoid resend
Level type interrupts do not need to be resent. It was also found that
some chipsets get confused in case of the resend.
Mark the ioapic level type interrupts as such to avoid the resend
functionality in the generic irq code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Sun, 12 Aug 2007 15:46:35 +0000 (15:46 +0000)]
genirq: suppress resend of level interrupts
Level type interrupts are resent by the interrupt hardware when they are
still active at irq_enable().
Suppress the resend mechanism for interrupts marked as level.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Sun, 12 Aug 2007 15:46:34 +0000 (15:46 +0000)]
genirq: cleanup mismerge artifact
Commit
5a43a066b11ac2fe84cf67307f20b83bea390f83: "genirq: Allow fasteoi
handler to retrigger disabled interrupts" was erroneously applied to
handle_level_irq(). This added the irq retrigger / resend functionality
to the level irq handler.
Revert the offending bits.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Sun, 12 Aug 2007 16:08:19 +0000 (18:08 +0200)]
sched: run_rebalance_domains: s/SCHED_IDLE/CPU_IDLE/
rebalance_domains(SCHED_IDLE) looks strange (typo), change it to CPU_IDLE.
the effect of this bug was slightly more agressive idle-balancing on
SMP than intended.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 12 Aug 2007 16:08:19 +0000 (18:08 +0200)]
sched: fix sleeper bonus
Peter Ziljstra noticed that the sleeper bonus deduction code
was not properly rate-limited: a task that scheduled more
frequently would get a disproportionately large deduction.
So limit the deduction to delta_exec.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adrian Bunk [Sun, 12 Aug 2007 16:08:19 +0000 (18:08 +0200)]
sched: make global code static
This patch makes the following needlessly global code static:
- arch_reinit_sched_domains()
- struct attr_sched_mc_power_savings
- struct attr_sched_smt_power_savings
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Sun, 12 Aug 2007 09:58:23 +0000 (02:58 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (28 commits)
ACPI: thermal: add DMI hooks to handle AOpen's broken Award BIOS
ACPI: thermal: create "thermal.act=" to disable or override active trip point
ACPI: thermal: create "thermal.nocrt" to disable critical actions
ACPI: thermal: create "thermal.psv=" to override passive trip points
ACPI: thermal: expose "thermal.tzp=" to set global polling frequency
ACPI: thermal: create "thermal.off=1" to disable ACPI thermal support
ACPI: thinkpad-acpi: fix sysfs paths in documentation
ACPI: static
ACPI EC: remove potential deadlock from EC
ACPI: dock: Send key=value pair instead of plain value
ACPI: bay: send envp with uevent - fix
acpi-cpufreq: Fix some x86/x86-64 acpi-cpufreq driver issues
ACPI: fix "Time Problems with
2.6.23-rc1-gf695baf2"
ACPI: thinkpad-acpi: change thinkpad-acpi input default and kconfig help
ACPI: EC: fix run-together printk lines
ACPI: sbs: remove dead code
ACPI: EC: acpi_ec_remove(): fix use-after-free
ACPI: EC: Switch from boot_ec as soon as we find its desc in DSDT.
ACPI: EC: fix build warning
ACPI: EC: If ECDT is not found, look up EC in DSDT.
...
Linus Torvalds [Sun, 12 Aug 2007 09:23:16 +0000 (02:23 -0700)]
i386: Fix broken mmiocfg accesses
Commit
3320ad994afb2c44ad34b3b34c3c5cf0da297331 broke mmio config space
accesses totally on i386 - it dropped the "reg" offset to the address.
Cc: dean gaudet <dean@arctic.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Vandrovec [Sun, 12 Aug 2007 08:12:52 +0000 (10:12 +0200)]
Do not replace whole memcpy in apply alternatives
apply_alternatives uses memcpy() to apply alternatives. Which has the
unfortunate effect that while applying memcpy alternative to memcpy
itself it tries to overwrite itself with nops - which causes #UD fault
as it overwrites half of an instruction in copy loop, and from this
point on only possible outcome is triplefault and reboot.
So let's overwrite only first two instructions of memcpy - as long as
the main memcpy loop is not in first two bytes it will work fine.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Len Brown [Sun, 12 Aug 2007 04:21:22 +0000 (00:21 -0400)]
Pull sbs into release branch
Len Brown [Sun, 12 Aug 2007 04:21:08 +0000 (00:21 -0400)]
Pull processor into release branch
Len Brown [Sun, 12 Aug 2007 04:20:59 +0000 (00:20 -0400)]
Pull fluff into release branch
Len Brown [Sun, 12 Aug 2007 04:20:41 +0000 (00:20 -0400)]
Pull ec into release branch
Len Brown [Sun, 12 Aug 2007 04:20:33 +0000 (00:20 -0400)]
Pull dock-bay into release branch
Len Brown [Sun, 12 Aug 2007 04:19:23 +0000 (00:19 -0400)]
Pull bugzilla-8842 into release branch
Len Brown [Sun, 12 Aug 2007 04:18:11 +0000 (00:18 -0400)]
Pull bugzilla-8768 into release branch
Len Brown [Sun, 12 Aug 2007 04:17:59 +0000 (00:17 -0400)]
Pull bugzilla-3774 into release branch
Len Brown [Sun, 12 Aug 2007 04:17:12 +0000 (00:17 -0400)]
pull asus sony thinkpad into release branch
Len Brown [Sun, 12 Aug 2007 04:13:02 +0000 (00:13 -0400)]
ACPI: thermal: add DMI hooks to handle AOpen's broken Award BIOS
Use DMI to:
1. enable polling (BIOS thermal events are broken)
2. disable active trip points (BIOS fan control is broken)
3. disable passive trip point (BIOS hard-codes it too low)
The actual temperature reading does work,
and with the aid of polling, the critical
trip point should work too.
http://bugzilla.kernel.org/show_bug.cgi?id=8842
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sun, 12 Aug 2007 04:12:54 +0000 (00:12 -0400)]
ACPI: thermal: create "thermal.act=" to disable or override active trip point
thermal.act=-1 disables all active trip points
in all ACPI thermal zones.
thermal.act=C, where C > 0, overrides all lowest temperature
active trip points in all thermal zones to C degrees Celsius.
Raising this trip-point may allow you to keep your system silent
up to a higher temperature. However, it will not allow you to
raise the lowest temperature trip point above the next higher
trip point (if there is one). Lowering this trip point may
kick in the fan sooner.
Note that overriding this trip-point will disable any BIOS attempts
to implement hysteresis around the lowest temperature trip point.
This may result in the fan starting and stopping frequently
if temperature frequently crosses C.
WARNING: raising trip points above the manufacturer's defaults
may cause the system to run at higher temperature and shorten
its life.
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sun, 12 Aug 2007 04:12:44 +0000 (00:12 -0400)]
ACPI: thermal: create "thermal.nocrt" to disable critical actions
thermal.nocrt=1 disables actions on _CRT and _HOT
ACPI thermal zone trip-points. They will be marked
as <disabled> in /proc/acpi/thermal_zone/*/trip_points.
There are two cases where this option is used:
1. Debugging a hot system crossing valid trip point.
If your system fan is spinning at full speed,
be sure that the vent is not clogged with dust.
Many laptops have very fine thermal fins that are easily blocked.
Check that the processor fan-sink is properly seated,
has the proper thermal grease, and is really spinning.
Check for fan related options in BIOS SETUP.
Sometimes there is a performance vs quiet option.
Defaults are generally the most conservative.
If your fan is not spinning, yet /proc/acpi/fan/
has files in it, please file a Linux/ACPI bug.
WARNING: you risk shortening the lifetime of your
hardware if you use this parameter on a hot system.
Note that this refers to all system components,
including the disk drive.
2. Working around a cool system crossing critical
trip point due to erroneous temperature reading.
Try again with CONFIG_HWMON=n
There is known potential for conflict between the
the hwmon sub-system and the ACPI BIOS.
If this fixes it, notify lm-sensors@lm-sensors.org
and linux-acpi@vger.kernel.org
Otherwise, file a Linux/ACPI bug, or notify
just linux-acpi@vger.kernel.org.
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sun, 12 Aug 2007 04:12:35 +0000 (00:12 -0400)]
ACPI: thermal: create "thermal.psv=" to override passive trip points
"thermal.psv=-1" disables passive trip points
for all ACPI thermal zones.
"thermal.psv=C", where 'C' is degrees Celsius,
overrides all existing passive trip points
for all ACPI thermal zones.
thermal.psv is checked at module load time,
and in response to trip-point change events.
Note that if the system does not deliver thermal zone
temperature change events near the new trip-point,
then it will not be noticed. To force your custom
trip point to be noticed, you may need to enable polling:
eg. thermal.tzp=3000 invokes polling every 5 minutes.
Note that once passive thermal throttling is invoked,
it has its own internal Thermal Sampling Period (_TSP),
that is unrelated to _TZP.
WARNING: disabling or raising a thermal trip point
may result in increased running temperature and
shorter hardware lifetime on some systems.
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sun, 12 Aug 2007 04:12:26 +0000 (00:12 -0400)]
ACPI: thermal: expose "thermal.tzp=" to set global polling frequency
Thermal Zone Polling frequency (_TZP) is an optional ACPI object
recommending the rate that the OS should poll the associated thermal zone.
If _TZP is 0, no polling should be used.
If _TZP is non-zero, then the platform recommends that
the OS poll the thermal zone at the specified rate.
The minimum period is 30 seconds.
The maximum period is 5 minutes.
(note _TZP and thermal.tzp units are in deci-seconds,
so _TZP = 300 corresponds to 30 seconds)
If _TZP is not present, ACPI 3.0b recommends that the
thermal zone be polled at an "OS provided default frequency".
However, common industry practice is:
1. The BIOS never specifies any _TZP
2. High volume OS's from this century never poll any thermal zones
Ie. The OS depends on the platform's ability to
provoke thermal events when necessary, and
the "OS provided default frequency" is "never":-)
There is a proposal that ACPI 4.0 be updated to reflect
common industry practice -- ie. no _TZP, no polling.
The Linux kernel already follows this practice --
thermal zones are not polled unless _TZP is present and non-zero.
But thermal zone polling is useful as a workaround for systems
which have ACPI thermal control, but have an issue preventing
thermal events. Indeed, some Linux distributions still
set a non-zero thermal polling frequency for this reason.
But rather than ask the user to write a polling frequency
into all the /proc/acpi/thermal_zone/*/polling_frequency
files, here we simply document and expose the already
existing module parameter to do the same at system level,
to simplify debugging those broken platforms.
Note that thermal.tzp is a module-load time parameter only.
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sun, 12 Aug 2007 04:12:17 +0000 (00:12 -0400)]
ACPI: thermal: create "thermal.off=1" to disable ACPI thermal support
"thermal.off=1" disables all ACPI thermal support at boot time.
CONFIG_ACPI_THERMAL=n can do this at build time.
"# rmmod thermal" can do this at run time,
as long as thermal is built as a module.
WARNING: On some systems, disabling ACPI thermal support
will cause the system to run hotter and reduce the
lifetime of the hardware.
Signed-off-by: Len Brown <len.brown@intel.com>
Henrique de Moraes Holschuh [Sat, 11 Aug 2007 03:08:33 +0000 (00:08 -0300)]
ACPI: thinkpad-acpi: fix sysfs paths in documentation
The documentation used "thinkpad-acpi" to refer to the directories in
sysfs, while it should have been using "thinkpad_acpi". Thanks to Hugh
Dickins for the error report.
I wish I could just call the module and everything else by the proper
name with the "-", instead of using these ugly translations to "_".
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Adrian Bunk [Fri, 10 Aug 2007 20:45:18 +0000 (13:45 -0700)]
ACPI: static
Make the needlessly global "acpi_event_seqnum" static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Alexey Starikovskiy [Fri, 10 Aug 2007 20:45:18 +0000 (13:45 -0700)]
ACPI EC: remove potential deadlock from EC
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Holger Macht [Fri, 10 Aug 2007 20:10:32 +0000 (13:10 -0700)]
ACPI: dock: Send key=value pair instead of plain value
Send key=value pair along with the uevent instead of a plain value so that
userspace (udev) can handle it like common environment variables.
Signed-off-by: Holger Macht <hmacht@suse.de>
Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Stephan Berberig <s.berberig@arcor.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Stephan Berberig [Fri, 10 Aug 2007 20:10:31 +0000 (13:10 -0700)]
ACPI: bay: send envp with uevent - fix
There must not be a new-line character in the uevent. Otherwise, udev gets
confused. Thanks to Kay Sievers for pointing it out.
Signed-off-by: Stephan Berberig <s.berberig@arcor.de>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sat, 11 Aug 2007 23:18:58 +0000 (16:18 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] monwriter: Serialization bug for multithreaded applications.
[S390] vmur: diag14 only works with buffers below 2GB
[S390] vmur: add "top of queue" sanity check for reader open
[S390] vmur: reject open on z/VM reader files with status HOLD
[S390] vmur: use DECLARE_COMPLETION_ONSTACK to keep lockdep happy
[S390] vmur: allocate single record buffers instead of one big data buffer
[S390] remove DEFAULT_MIGRATION_COST
[S390] qdio: make sure data structures are correctly aligned.
[S390] hypfs: implement show_options
[S390] cio: avoid memory leak on error in css_alloc_subchannel().
Linus Torvalds [Sat, 11 Aug 2007 23:09:49 +0000 (16:09 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Fix size check for hugetlbfs
[POWERPC] Fix initialization and usage of dma_mask
[POWERPC] Fix more section mismatches in head_64.S
[POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UEC"
[POWERPC] PS3: Update ps3_defconfig
[POWERPC] PS3: Remove text saying PS3 support is incomplete
[POWERPC] PS3: Fix storage probe logic
[POWERPC] cell: Move SPU affinity init to spu_management_of_ops
[POWERPC] Fix potential duplicate entry in SLB shadow buffer
Linus Torvalds [Sat, 11 Aug 2007 23:03:27 +0000 (16:03 -0700)]
Merge branch 'async-tx-fixes-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop
* 'async-tx-fixes-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop:
async_tx: update MAINTAINERS for async_tx and iop-adma
Linus Torvalds [Sat, 11 Aug 2007 23:01:34 +0000 (16:01 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: set non-default s_time_gran during mount
ocfs2: Retry sendpage() if it returns EAGAIN
ocfs2: Fix rename/extend race
[2.6 patch] ocfs2_insert_extent(): remove dead code
ocfs2: Fix max offset calculations
ocfs2: check ia_size limits in setattr
ocfs2: Fix some casting errors related to file writes
ocfs2: use s_maxbytes directly in ocfs2_change_file_space()
ocfs2: Restrict inode changes in ocfs2_update_inode_atime()
Linus Torvalds [Sat, 11 Aug 2007 23:01:06 +0000 (16:01 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
BLOCK: Hide the contents of linux/bio.h if CONFIG_BLOCK=n
sysace: HDIO_GETGEO has it's own method for ages
drivers/block/cpqarray.c: better error handling and kmalloc + memset conversion to k[cz]alloc
drivers/block/cciss.c: kmalloc + memset conversion to kzalloc
Clean up duplicate includes in drivers/block/
Fix remap handling by blktrace
[PATCH] remove mm/filemap.c:file_send_actor()
Linus Torvalds [Sat, 11 Aug 2007 22:58:37 +0000 (15:58 -0700)]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
sched debug: dont print kernel address in /proc/sched_debug
sched: fix typo in the FAIR_GROUP_SCHED branch
sched: improve rq-clock overflow logic
Chuck Ebbert [Fri, 10 Aug 2007 20:31:11 +0000 (22:31 +0200)]
i386: Fix double fault handler
The new percpu code has apparently broken the doublefault handler
when CONFIG_DEBUG_SPINLOCK is set. Doublefault is handled by
a hardware task, making the check
SPIN_BUG_ON(lock->owner == current, lock, "recursion");
fault because it uses the FS register to access the percpu data
for current, and that register is zero in the new TSS. (The trace
I saw was on 2.6.20 where it was GS, but it looks like this will
still happen with FS on 2.6.22.)
Initializing FS in the doublefault_tss should fix it.
AK: Also fix broken ptr_ok() and turn printks into KERN_EMERG
AK: And add a PANIC prefix to make clear the system will hang
AK: (e.g. x86-64 will recover)
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Fri, 10 Aug 2007 20:31:10 +0000 (22:31 +0200)]
i386: Fix start_kernel warning
Fix
WARNING: vmlinux.o(.text+0x183): Section mismatch: reference to .init.text:start_kernel (between 'is386' and 'check_x87')
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pete Zaitcev [Fri, 10 Aug 2007 20:31:09 +0000 (22:31 +0200)]
x86_64: vdso.lds in arch/x86_64/vdso/.gitignore
Create arch/x86_64/vdso/.gitignore and put vdso.lds into it.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Fri, 10 Aug 2007 20:31:08 +0000 (22:31 +0200)]
i386: Add warning in Documentation that zero-page is not a stable ABI
Some people writing boot loaders seem to falsely belief the 32bit zero page is a
stable interface for out of tree code like the real mode boot protocol. Add a comment
clarifying that is not true.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Fri, 10 Aug 2007 20:31:07 +0000 (22:31 +0200)]
i386: Use global flag to disable broken local apic timer on AMD CPUs.
The Averatec 2370 and some other Turion laptop BIOS seems to program the
ENABLE_C1E MSR inconsistently between cores. This confuses the lapic
use heuristics because when C1E is enabled anywhere it seems to affect
the complete chip.
Use a global flag instead of a per cpu flag to handle this.
If any CPU has C1E enabled disabled lapic use.
Thanks to Cal Peake for debugging.
Cc: tglx@linutronix.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Fri, 10 Aug 2007 20:31:06 +0000 (22:31 +0200)]
i386: really stop MCEs during code patching
It's CONFIG_X86_MCE, not CONFIG_MCE.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zachary Amsden [Fri, 10 Aug 2007 20:31:05 +0000 (22:31 +0200)]
x86_64: Early segment setup for VT
VT is very picky about when it can enter execution.
Get all segments setup and get LDT and TR into valid state to allow
VT execution under VMware and KVM (untested).
This makes the boot decompression run under VT, which makes it several
orders of magnitude faster on 64-bit Intel hardware.
Before, I was seeing times up to a minute or more to decompress a 1.3MB kernel
on a very fast box.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Fri, 10 Aug 2007 20:31:03 +0000 (22:31 +0200)]
i386: Make patching more robust, fix paravirt issue
Commit
19d36ccdc34f5ed444f8a6af0cbfdb6790eb1177 "x86: Fix alternatives
and kprobes to remap write-protected kernel text" uses code which is
being patched for patching.
In particular, paravirt_ops does patching in two stages: first it
calls paravirt_ops.patch, then it fills any remaining instructions
with nop_out(). nop_out calls text_poke() which calls
lookup_address() which calls pgd_val() (aka paravirt_ops.pgd_val):
that call site is one of the places we patch.
If we always do patching as one single call to text_poke(), we only
need make sure we're not patching the memcpy in text_poke itself.
This means the prototype to paravirt_ops.patch needs to change, to
marshal the new code into a buffer rather than patching in place as it
does now. It also means all patching goes through text_poke(), which
is known to be safe (apply_alternatives is also changed to make a
single patch).
AK: fix compilation on x86-64 (bad rusty!)
AK: fix boot on x86-64 (sigh)
AK: merged with other patches
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Fri, 10 Aug 2007 20:31:02 +0000 (22:31 +0200)]
x86: Disable CLFLUSH support again
It turns out CLFLUSH support is still not complete; we
flush the wrong pages. Again disable it for the release.
Noticed by Jan Beulich who then also noticed a stupid typo later.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Fri, 10 Aug 2007 20:31:01 +0000 (22:31 +0200)]
x86_64: Don't mark __exitcall as __cold
gcc currently doesn't support attributes on types, so we can't use it
function pointers. This avoids some warnings on a gcc 4.3 build.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Murillo Fernandes Bernardes [Fri, 10 Aug 2007 20:31:00 +0000 (22:31 +0200)]
x86_64: Calgary - Fix mis-handled PCI topology
Current code assumed that devices were directly connected to a Calgary
bridge, as it tried to get the iommu table directly from the parent bus
controller.
When we have another bridge between the Calgary/CalIOC2 bridge and the
device we should look upwards until we get to the top (Calgary/CalIOC2
bridge), where the iommu table resides.
Signed-off-by: Murillo Fernandes Bernardes <mfb@br.ibm.com>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dean gaudet [Fri, 10 Aug 2007 20:30:59 +0000 (22:30 +0200)]
x86: Work around mmio config space quirk on AMD Fam10h
Some broken devices have been discovered to require %al/%ax/%eax registers
for MMIO config space accesses. Modify mmconfig.c to use these registers
explicitly (rather than modify the global readb/writeb/etc inlines).
AK: also changed i386 to always use eax
AK: moved change to extended space probing to different patch
AK: reworked with inlines according to Linus' requirements.
AK: improve comments.
Signed-off-by: dean gaudet <dean@arctic.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Ungerer [Fri, 10 Aug 2007 20:01:20 +0000 (13:01 -0700)]
changing include/asm-generic/pgtable.h for non-mmu
There are some parts of include/asm-generic/pgtable.h that are relevant to
the non-mmu architectures. To make it easier to include this from them I
would like to ifdef the relevant parts.
Without this there is a handful of functions that are referenced in here
that are not defined on many non-mmu architectures. They could be defined
out of course, as an alternative approach.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muli Ben-Yehuda [Fri, 10 Aug 2007 20:01:19 +0000 (13:01 -0700)]
finish i386 and x86-64 sysdata conversion
This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully
also fixes Riku's and Andy's observed bugs. It is based on Yinghai Lu's
and Andy Whitcroft's patches (thanks!) with some changes:
- introduce pci_scan_bus_with_sysdata() and use it instead of
pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will
allocate the sysdata structure and then call pci_scan_bus().
- always allocate pci_sysdata dynamically. The whole point of this
sysdata work is to make it easy to do root-bus specific things
(e.g., support PCI domains and IOMMU's). I dislike using a default
struct pci_sysdata in some places and a dynamically allocated
pci_sysdata elsewhere - the potential for someone indavertantly
changing the default structure is too high.
- this patch only makes the minimal changes necessary, i.e., the NUMA node is
always initialized to -1. Patches to do the right thing with regards
to the NUMA node can build on top of this (either add a 'node'
parameter to pci_scan_bus_with_sysdata() or just update the node
when it becomes known).
The patch was compile tested with various configurations (e.g., NUMAQ,
VISWS) and run-time tested on i386 and x86-64. Unfortunately none of my
machines exhibited the bugs so caveat emptor.
Andy, could you please see if this fixes the NUMA issues you've seen?
Riku, does this fix "pci=noacpi" on your laptop?
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: <riku.seppala@kymp.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Hemminger [Fri, 10 Aug 2007 20:01:16 +0000 (13:01 -0700)]
readahead: docbook fix
Minor docbook error since argument name in comment doesn't match function
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jay Estabrook [Fri, 10 Aug 2007 20:01:12 +0000 (13:01 -0700)]
alpha: -Werror fixes for sys_titan.c
This code corrects the usage of the request_irq() routine.
Signed-off-by: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jes Sorensen [Fri, 10 Aug 2007 20:01:11 +0000 (13:01 -0700)]
lguest files should explicitly include asm/paravirt.h
Files using bits from paravirt.h should explicitly include it rather than
relying on it being pulled in by something else.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Chubb [Fri, 10 Aug 2007 20:01:10 +0000 (13:01 -0700)]
fix compilation with gcc 4.2
gcc-4.2 is a lot more picky about its symbol handling. EXPORT_SYMBOL no
longer works on symbols that are undefined or defined with static scope.
For example, with CONFIG_PROFILE off, I see:
kernel/profile.c:206: error: __ksymtab_profile_event_unregister causes a section type conflict
kernel/profile.c:205: error: __ksymtab_profile_event_register causes a section type conflict
This patch moves the EXPORTs inside the #ifdef CONFIG_PROFILE, so we
only try to export symbols that are defined.
Also, in kernel/kprobes.c there's an EXPORT_SYMBOL_GPL() for
jprobes_return, which if CONFIG_JPROBES is undefined is a static
inline and gives the same error.
And in drivers/acpi/resources/rsxface.c, there's an
ACPI_EXPORT_SYMBOPL() for a static symbol. If it's static, it's not
accessible from outside the compilation unit, so should bot be exported.
These three changes allow building a zx1_defconfig kernel with gcc 4.2
on IA64.
[akpm@linux-foundation.org: export jpobe_return properly]
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miao Xie [Fri, 10 Aug 2007 20:01:09 +0000 (13:01 -0700)]
timer: remove clockevents_unregister_notifier
I find a function(clockevents_unregister_notifier) which is not called by
anything in tree.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Fri, 10 Aug 2007 20:01:09 +0000 (13:01 -0700)]
spidev warning fix
Git rid of "warning: passing arg 2 of `access_ok' makes pointer from integer
without a cast" reported on SH ... most architectures use macros in that
test, SH uses inlined functions.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Fri, 10 Aug 2007 20:01:08 +0000 (13:01 -0700)]
cris: drivers/cdrom/Kconfig no longer exists
scripts/kconfig/conf -d arch/cris/Kconfig
arch/cris/Kconfig:183: can't open file "drivers/cdrom/Kconfig"
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>