[ALSA] oxygen: reduce SPI clock frequency for AK4396/WM8785

According to the datasheets, the SPI clock cycle must be at least 200 ns
for the AK4396 and the WM8785, so we cannot use the default 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: allow more sample rates with WM8785

Allow to record with 32 kHz, 64 kHz, 88.2 kHz and 176.4 kHz with cards
that have a WM8785 ADC.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: add more symbols

Add symbol definitions for the various codecs and GPIO pins.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: remove MIDI autodetection

The MIDI bit in the MISC register is set by default and cannot be used
to detect the presence of a MIDI port.  Instead, add a parameter to the
oxygen_pci_probe() function so that model drivers can specify this.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: fix pause handling

Use the DMA_PAUSE register for pausing instead of stopping DMA.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: remove magic numbers

Replace some magic numbers with register symbols.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: update ALSA-Configuration.txt

Add documentation entries for snd-oxygen and snd-virtuoso.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] emu10k1 - Fix over-sized kmalloc for TLV

Reported by Al Viro:
In copy_tlv(), the size of kmalloc is wrongly calculated.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-intel - Make azx_get_response() a bit more robust

In azx_[rirb_]get_response(), the timeout is checked at the end of the loop.
It's better to be checked just after the check of the RIRB index to avoid
a bogus error with a too long msleep().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ice1712, ice1724 - Code clean up

Clean up ice1712/ice1724 codes.  The board-specific data is allocated
locally in each code instead of having an ungly union in struct ice1712.
Also, fix coding issues in prodigy_hifi.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda_proc - Add a number of new settings to proc codec output

This patch adds additional output to the /proc codec#X info.
The following pieces of information are added to the output:
-  Balanced, L/R swap, trigger, impedance sense pin capabilities
-  Vref pin capabilities
-  Current Vref pin widget control setting
-  Default configuration association, sequence, and misc bit test
-  EAPD/BTL bits conveying balanced mode, EAPD, and L/R swap
-  Power state modified to show state name as well as setting vs actual value
-  GPIO parameter output on Audio Function Group, including enumeration of IO
   pins which are indicated present (Any I and O pins are not output at this
   time)
-  Stripe and L/R swap widget capabilities
-  All digital converter bits: enable, validity, validity config, preemphasis,
   copyright, non-audio, professional, generation level, and content category
-  Converter stream and channel values for in/out widgets
-  SDI select value for in widgets
-  Unsolicited response widget capability tag and enabled bit
-  Delay widget capability value
-  Processing widget capability benign bit and number of coefficients
-  Realtek Define Registers: processing coefficient, coefficient index
[Also, fixed space/tab issues and make codes a bit more readable
  -- Takashi]

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: fix playback routing

The default playback routing must be 0xe4, not 0xe1; the front and
surround DACs were exchanged.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: add register definitions

Add more symbols for registers and register fields.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] mpc8610: Add mmap support

Enable mmap support in the MPC8610 ASoC driver.  The driver can use ALSA's
default mmap functionality, it was just not enabled previously.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Fix capture source for Cx5045 codec

For codec conexant 5045, I found that the name of 'Capture Source Items'
is different from the name of mixer.
The mixer is:
HDA_CODEC_VOLUME('Ext Mic Playback Volume', 0x17, 0x2, HDA_INPUT),
HDA_CODEC_MUTE('Ext Mic Playback Switch', 0x17, 0x2, HDA_INPUT),
But the capture source item is :
static struct hda_input_mux cxt5045_capture_source = {
.num_items = 2,
.items = {
{ 'IntMic', 0x1 },
{ 'LineIn', 0x2 },
}
};
I think that it's better to change the name of capture_source to avoid
misunderstanding.

Signed-off-by: Jiang zhe <zhe.jiang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - New model for conexant 5045 codec to support benq r55e

The benq r55e laptop have 3 jacks on the front panel.
One for HP, one for Line In and one for Mic In.
This patch implemented a new model to support it.

Signed-off-by: Jiang Zhe <zhe.jiang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Add missing model for HD-audio Cx5045 codec

Added the description of the model fujitsu for Cx5045 codec chip.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ice1724 - Add missing prodigy_hifi.h

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: make the I2S format configurable

Add proper register bit symbols for the I2S format field, and allow card
models to configure the I2S format to be used for the DACs and ADCs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ice1712 - fixed midi input for Hoontech C-Ports

See ALSA bug#1846 for more details.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV

See ALSA bug#2384 for more details.

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - remove 11c1:1040 from patch_si3054.c id list

Codec with id 11c1:1040 sitting on hda bus isn't si3054-compatible.
It should be removed from patch_si3054.c id list.
The detailed information
http://archives.linmodems.org/26457
From: Vasily Khoruzhick <anarsoul@gmail.com>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-intel - Add workarounds for STAC codecs

Some machines with STAC codecs seem to have problems (e.g. no audible
playback) when the delay in codec-read routine is too short.
I still don't figure out which command sequence causes this problem
(due to lack of test hardware), but it's known that increasing the
delay fixes.  So, added a stupid workaround here temporarily...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hdsp: make Multiface II work again

This device has io_type == 1 (Multiface) and firmware_rev > 0xa
(fixes regression from changeset 5326)

Signed-off-by: Andreas Degert <ad@papyrus-gmbh.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] snd-powermac: handle dead DMA transfers

This patch provides the snd-powermac sound driver with the ability to handle
dead DMA transfers. If a dead DMA transfer is detected, the driver now sets
up a new DMA transfer to continue with the sound output at the point where the
old transfer died.
This dead DMA transfer handling has become necessary with recent kernels on
certain G4 PowerMacs. Please refer to the following URLs for more information:
 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3126
 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/87652
 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=436723
The patch is based on the dead DMA transfer handling code from the old dmasound
driver which can be found in the file sound/oss/dmasound/dmasound_awacs.c in
the Linux source code.

Signed-off-by: T. H. Huth <th.huth@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] sound: fix caiaq section mismatches

Fix section mismatch in caiaq: these __devinit functions can be
called at any time so they should not be __devinit.
WARNING: vmlinux.o(.text+0x10a8dae): Section mismatch: reference to .init.text:snd_usb_caiaq_audio_init (between 'setup_card' and 'create_card')
WARNING: vmlinux.o(.text+0x10a8dd6): Section mismatch: reference to .init.text:snd_usb_caiaq_midi_init (between 'setup_card' and 'create_card')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] sound: fix rme9652 section mismatch

Fix section mismatch in hdsp:  snd_hdsp_proc_init() can be called from
an ioctl at any time.
WARNING: vmlinux.o(.text+0x1089bc2): Section mismatch: reference to .init.text: (between 'snd_hdsp_create_alsa_devices' and 'snd_hdsp_free')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] sound: fix atiixp section mismatch

Fix section mismatch in atiixp by making some functions __devinit.
WARNING: vmlinux.o(.text+0xfd9304): Section mismatch: reference to .init.data:atiixp_quirks (between 'ac97_probing_bugs' and 'snd_atiixp_codec_detect')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] sound: fix ad1889 section mismatch

Fix section mismatch in ad1889 by renaming the pci_driver variable to a
whitelisted variable name.
WARNING: vmlinux.o(.data+0x2e5ff0): Section mismatch: reference to .init.text:snd_ad1889_probe (between 'ad1889_pci' and 'index')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] sound: fix mts64 section mismatches

Fix section mismatches in mts64 by making a static variable __devinitdata.
WARNING: vmlinux.o(.data+0x2e33f0): Section mismatch: reference to .init.data:mts64_ctl_smpte_switch (between 'control.19929' and 'snd_mts64_rawmidi_output_ops')
WARNING: vmlinux.o(.data+0x2e33f8): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_hours (between 'control.19929' and 'snd_mts64_rawmidi_output_ops')
WARNING: vmlinux.o(.data+0x2e3400): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_minutes (between 'control.19929' and 'snd_mts64_rawmidi_output_ops')
WARNING: vmlinux.o(.data+0x2e3408): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_seconds (between 'control.19929' and 'snd_mts64_rawmidi_output_ops')
WARNING: vmlinux.o(.data+0x2e3410): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_frames (between 'control.19929' and 'snd_mts64_rawmidi_output_ops')
WARNING: vmlinux.o(.data+0x2e3418): Section mismatch: reference to .init.data:mts64_ctl_smpte_fps (between 'control.19929' and 'snd_mts64_rawmidi_output_ops')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: make PCM limits configurable

Add a callback to the model structure to allow modification of the
hardware PCM limits.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: add control filter to model struct

Allow the models to modify mixer controls before they are added to the
card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: make all DMA channels configurable

Allow the card models to specify whether each of the hardware DMA
channels is used.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: make SPI configuration configurable

Add a field to the model structure so that it is possible to have a card
where the SPI outputs 4 and 5 are used for an EEPROM.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: make AC97 codec optional

Only initialize and create mixer controls for the first AC97 codec when
one has actually been detected.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Enable VIA SPDIF input pin

Enable the SPDIF input-pin on VIA codecs when SPDIF-input is enabled
by BIOS.  Also, including a bit code clean up.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Add the support of Dell OEM laptops with ALC268

Added the support of Dell OEM laptops (Vostro 1200) with ALC268 codec.
The new model=dell is provided.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Disable PCBEEP mixer element in test model

It turned out that the PCBEEP element (0x1d) is disabled on some hardwares
although it's defined in the datasheet.  Because of the error at info of
this element, the mixer gets totally unusable.
Since the PCBEEP isn't that important feature, it's safer to disable this.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-code - Clean up STAC GPIO enablement code

There are two similar GPIO-enablement codes in patch_sigmatel.c.
Let's clean up.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] HDA: Enable chipset gcap usage

This patch removes hardcoded values for the number of streams supported
by the southbridge in most chipsets, and reads these values from the
chipset directly.  Most systems are hardwired for 4 streams in each
direction, but newer chipsets change that capability.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: rename PCM to Master

Rename the 'PCM Playback Volume'/'Switch' mixer controls to 'Master'.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] cs4231: remove one busy wait

This busy_wait is not needed after latest changes
to the cs4231-lib

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: make line-in switch exclusive

The line input cannot be mixed with the other inputs, so we have to mute
the other input switches when it is selected.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: use an array of snd_kcontrol pointers

Use an array for the pointers to known controls so that it is easier to
add more.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: fix channel routing

Do not exchange the surround and back jacks except when in 7.1 mode
where the surround jack is not rear but side.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] fix compilation warning in GCC

'snd_shutdown_f_ops' is not a pointer so its address will never be NULL.
GCC will complain because 'fops_get' will do an unnecessary check because
'&snd_shutdown_f_ops' is always true.

Signed-off-by: Miguel Boton <mboton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Remove obsolete FIXME's

Removed 'FIXME' comments that have been already fixed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda: Fix 5.1 sound in Dell 6stack ALC888 HDA

This patch fixes 5.1 surround output and headphone detection in the
Dell Inspiron 530 and possibly other Dell systems using the ALC888
codec (mode 6stack-dell).

Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda_intel: Fix multiple device support by incrementing device count

Fixes multiple device support by incrementing the static device counter
at the end of the azx_probe() call. Without this, subsequent probes would
always use the index specified for the first card.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Add ASoC drivers for the Freescale MPC8610 SoC

Add the ASoC drivers for the Freescale MPC8610 SoC and the MPC8610 HPCD
reference board.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Don't build boost controls for digital mics

The ALC auto-probe creates mic boost controls automatically for the
probed pins, but it assumes that they are analog mics.  The digital
mics have no boost controls and must be skipped.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - print control name in error messages

Print the name of the defect controls in error messages in amp info
callback.  This will make debugging easier.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda: Add new STAC9205 PCI_QUIRK

Added a new STAC 9205 quirk for Vostro 1500.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] PCM interface - rename SNDRV_PCM_TSTAMP_MMAP to SNDRV_PCM_TSTAMP_ENABLE

Change semantics for SNDRV_PCM_TSTAMP_MMAP. Doing timestamping only in
the interrupt handler might cause that hw_ptr is not related to actual
timestamp. With this change, grab timestamp at every hw_ptr update to
have always valid timestamp + ring buffer position pair.
With this change, SNDRV_PCM_TSTAMP_MMAP was renamed to
SNDRV_PCM_TSTAMP_ENABLE. It's no regression (I think).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda: 92HD7XXX power management support

Added support for advanced power management support for output ports on
92HD7xxx family of codecs. Inactive output ports are powered down when
the pin sense  doesn't detect a connection, and powered back up when a
connection is sensed.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Add virtual master controls

Add master controls using vmaster to codecs that have no real hardware
master volume registers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Add virtual master control helpers

Added helper functions to implement virtual master volume controls.
The virtual master control is a control element that has multiple
slave controls.  The value of master element is equally added to
slave elements.
The functions are written for general purpose, but it's put in the
HD-audio directory as now, since HD-audio driver is the only user.
It should be moved to the common place once after other drivers use
vmaster.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Preliminary ac97 drivers for Toshiba e800 PDAs

Currently only the AUX channel is used (touchscreen)

Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] S3C2412: suspend and resume support

Support for suspend/resume for the S3C2412 ASoC IIS
core driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ASoC: S3C2412 IIS driver

S3C2412 SoC IIS support for ALSA/ASoC

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Support suspend and resume of the I2S interface on s3c24xx

Signed-off-by: Graeme Gregory <graeme@openmoko.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Reinitialise DMA on every resume

This one changes the DMA initialisation as it turns out the DMA driver
in s3c24xx doesnt store registers between suspend/resume so you have
to re-initialise the channels on every resume.

Signed-off-by: Graeme Gregory <graeme@openmoko.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Initial WM8753 TLV support for capture mixer

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Bump ASoC core version number

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Don't lock the codec list in snd_soc_dapm_new_widgets()

snd_soc_dapm_new_widgets() takes the codec lock when adding new widgets,
causing lockdep warnings when applications later call down through ALSA
to adjust controls.  Since widgets are only added during probe this lock
should be unneeded so don't take it.
Thanks to Dmitry Baryshkov <dbaryshkov@gmail.com> for reporting this issue.
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Add support for passing kcontrols with events

Signed-off-by: Laim Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Clean up tabs

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Fix power switching support for DAPM_SWITCH widgets

Signed-off-by: Milan plzik <milan.plzik@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Ensure PCMs are suspended

This fixes a bug whereby PCMs were not being suspended when the rest of the
audio subsystem was suspended.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Add D1 power event to power down event sequence

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ASoC TLV support

Add TLV support to ASoC.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] soc - Add device level DAPM event

Added a device level dapm event so that both the machine and codec are informed
when dapm events occur.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Fix inverted Phone volume WM9712 mixer control

Signed-off-by: Joe Sauer <jsauer@vernier.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Update MAINTAINERS for ALSA SoC

Add myself as a point of contact for the ALSA SoC subsystem and add a
reference to the development GIT tree.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda: STAC9228 VT fixes

Moved 2 systems PCI_QUIRK values to STAC_DELL_BIOS. Also the second
front HP jack is incorrect defined in the BIOS VT's for some laptops,
this patch corrects this.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Device ID for Macbook sound card

Please refer to the [0003680] on ALSA bugtracking system.
The user found that 'model=mbp3' works and provided the ID.
From: Jiang zhe <zhe.jiang@intel.com>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Update realtek codec support

1. Support HP rp5700
2. Fixed alc_subsystem_id function (Bug fixed and support Desktop)
3. Support ASUS EP20

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] rawmidi: let sparse know what is going on _for real_

snd_rawmidi_kernel_read1/write1 weren't annotated but used
copy_to_user/copy_from_user when one of parameters (kernel) was equal to 0
remove it and add properly annotated parameter

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda: 92HD71BXX Mono Mute Support

Added a mono output mute mixer for the 92hd71bxx family of codecs, this
also removes the need for the mono out node to explicitly unmuted in the
core init.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Remove sound/driver.h

This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Remove PCM sleep_min and tick

The 'tick' in PCM is set (again) via sw_params.  And, nobody uses
this feature at all except for a command line option of aplay.
(This is literally 'nobody', as I checked alsa-lib API calls in all
 programs in major distros.)
Above all, if we need finer wake-ups for the position update, it's
basically an issue that the driver should solve, not tuned by each
application.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] PCM - clean up snd_pcm_lib_read/write

Introduce a common helper function for snd_pcm_lib_read and snd_pcm_lib_write
for cleaning up the code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Remove PCM xfer_align sw params

The xfer_align sw_params parameter has never been used in a sane manner,
and no one understands what this does exactly.  The current
implementation looks also buggy because it allows write of shorter size
than xfer_align.  So, if you do partial writes, the write isn't actually
aligned at all.
Removing this parameter will make some pcm_lib_* code more readable
(and less buggy).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Fix PCM write blocking

The snd_pcm_lib_write1() may block in some weird condition:
  - the stream isn't started
  - avail_min is big (e.g. period size)
  - partial write up to buffer_size - avail_min
The patch fixes this invalid blocking problem.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Remove indirect control access

This patch removes the indirect control access to the control elements.
The indirect access has never been used and is even broken on 32bit
ioctl wrapper.  Let's clean it up.
The pointers still remain in snd_ctl_elem_* structs just to make sure
that the struct size won't change.  Once after checking the size
consistency, we can get rid of them, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Add model=laptop for HP 350 laptop

Added the proper model=laptop for HP 350 laptop with Cxt5045 codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Add test model for ALC268

This implements a test model for the ALC268.  It depends on the feature
added by alc260-test-eapd-0.2.diff.  This patch also adds a mention of
the ALC260 test model to ALSA-Configuration.txt since this seems to have
been missed.

Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Add EAPD controls for ALC260 test model

This implements a switch control for the EAPD signal output by the ALC26x
chips.  Since some laptops may utilise this to activate useful things it
is handy to have a control for this in the ALC26x test models.  The patch
includes the control in the ALC260 test model.

Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] PCM core - remove SNDRV_PCM_TSTAMP_MMAP condition in snd_pcm_status()

The condition caused that the returned ring buffer position does not match
with timestamp when SNDRV_PCM_TSTAMP_MMAP mode was enabled. Removing
condition makes unified behaviour and interrupt based timestamp can be
accessed via PCM_IOCTL_SYNC_PTR or mmaped status area.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda: Dynamically create digital gain mixers

Dynamically create digital gain mixers for dmics that have out-amp
support. Also some 92HD73xx's codecs don't have DMIC gains, so this also
prevents creating dead mixers.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-intel - Support multiple devices

It turned out that there can be multiple HD-audio devices on a single
machine (e.g. on-board audio and HDMI on graphic cards), so we need to
support multiple devices with snd-hda-intel driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] sound: Use time_before, time_before_eq, etc.

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.
A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@ change_compare_np @
expression E;
@@
(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)
@ include depends on change_compare_np @
@@
#include <linux/jiffies.h>
@ no_include depends on !include && change_compare_np @
@@
  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] es18xx: Enable wavetable input from ESS chips

This patch enables wavetable chips ES689/ES69X connected to
ESS ES18xx chips. The wavetable chip uses FM DAC if the clock signal
from the wavetable is active.
It has no effect if there is no ESS wavetable chip present.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Add IEC958 digital out support for Lenovo Thinkpads T61/X61

This patch adds IEC958 digital out support for the AD1984 sound card.
This card can be found in Lenovo Thinkapds T61/X61. The digital out is
not located on the Thinkpad, but optional docking station (it's coxial
digital out). I've add this support as it is done the exact same way
for the AD1983 & AD1884.
I have tested this patch with my Lenovo Thinkpad T61 hooked up to a
docking station (that has the digital coxial) and then run to my home
theater reciever. Works like a charm :-)

Signed-off-by: Jerone Young <jerone@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda: STAC927x VREF fix

Some laptops incorrectly assume the front input jack as a line in
instead of a microphone in. Which in turn disables the voltage
reference, in which non-amplified input is not possible.  This patch
enables VREF80 for the input jack.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: use uintptr_t in pointer casts

When we store the DMA channel number in the substream's private_data
pointer, use uintptr_t as an intermediate step when casting from/to
unsigned int to prevent the compiler from whining when the pointer size
is different.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] sound/usb/usbaudio.c: fix build with CONFIG_PM=n

sound/usb/usbaudio.c: In function 'usb_audio_suspend':
sound/usb/usbaudio.c:3674: error: implicit declaration of function 'snd_pcm_sus\pend_all'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda-codec - Sort ad1986a cfg table

Sort the ad1986a config table by PCI SSID (the last toshiba entry was
added wrongly).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] add Asus Xonar driver

Add the snd-virtuoso driver for the Asus Virtuoso 200 chip used on the
PCI and PCI-E models of the Xonar sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] add CMI8788 driver

Add the snd-oxygen driver for the C-Media CMI8788 (Oxygen) chip, used on
the Asound A-8788, AuzenTech X-Meridian, Bgears b-Enspirer,
Club3D Theatron DTS, HT-Omega Claro, Razer Barracuda AC-1,
Sondigo Inferno, and TempoTec HIFIER sound cards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>