linux-2.6
18 years agoMake sure to re-enable SCI after an ACPI suspend
Linus Torvalds [Tue, 20 Jun 2006 01:05:09 +0000 (18:05 -0700)] 
Make sure to re-enable SCI after an ACPI suspend

According to the ACPI spec, it should be enabled on return from suspend,
but bugs happen.  Apparently especially on the Apple Intel Macs.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoImprove SATA core suspend/resume
Linus Torvalds [Tue, 20 Jun 2006 01:01:27 +0000 (18:01 -0700)] 
Improve SATA core suspend/resume

Doing a full ata_busy_sleep() seems to get suspend and resume working
fine on the Apple Mac Mini, at least.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoLinux v2.6.17 v2.6.17
Linus Torvalds [Sun, 18 Jun 2006 01:49:35 +0000 (18:49 -0700)] 
Linux v2.6.17

Being named "Crazed Snow-Weasel" instills a lot of confidence in this
release, so I'm sure this will be one of the better ones.

18 years ago[PATCH] powerpc: enable CPU_FTR_CI_LARGE_PAGE for cell
Arnd Bergmann [Thu, 15 Jun 2006 13:09:16 +0000 (15:09 +0200)] 
[PATCH] powerpc: enable CPU_FTR_CI_LARGE_PAGE for cell

Reflect the fact that the Cell Broadband Engine supports 64k
pages by adding the bit to the CPU features.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] powerpc: Fix 64k pages on non-partitioned machines
Arnd Bergmann [Thu, 15 Jun 2006 11:15:44 +0000 (21:15 +1000)] 
[PATCH] powerpc: Fix 64k pages on non-partitioned machines

The page size encoding passed to tlbie is incorrect for new-style
large pages.  This fixes it.  This doesn't affect anything on older
machines because mmu_psize_defs[psize].penc (the page size encoding)
is 0 for 4k and 16M pages (the two are distinguished by a separate "is
a large page" bit).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] arm_timer: remove a racy and obsolete PF_EXITING check
Oleg Nesterov [Thu, 15 Jun 2006 16:12:02 +0000 (20:12 +0400)] 
[PATCH] arm_timer: remove a racy and obsolete PF_EXITING check

arm_timer() checks PF_EXITING to prevent BUG_ON(->exit_state)
in run_posix_cpu_timers().

However, for some reason it does so only for CPUCLOCK_PERTHREAD
case (which is imho wrong).

Also, this check is not reliable, PF_EXITING could be set on
another cpu without any locks/barriers just after the check,
so it can't prevent from attaching the timer to the exiting
task.

The previous patch makes this check unneeded.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] run_posix_cpu_timers: remove a bogus BUG_ON()
Oleg Nesterov [Thu, 15 Jun 2006 16:11:43 +0000 (20:11 +0400)] 
[PATCH] run_posix_cpu_timers: remove a bogus BUG_ON()

do_exit() clears ->it_##clock##_expires, but nothing prevents
another cpu to attach the timer to exiting process after that.
arm_timer() tries to protect against this race, but the check
is racy.

After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and
before do_exit() calls 'schedule() local timer interrupt can find
tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu
does sys_wait4) interrupted task has ->signal == NULL.

At this moment exiting task has no pending cpu timers, they were
cleanuped in __exit_signal()->posix_cpu_timers_exit{,_group}(),
so we can just return from irq.

John Stultz recently confirmed this bug, see

http://marc.theaimsgroup.com/?l=linux-kernel&m=115015841413687

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] check_process_timers: fix possible lockup
Oleg Nesterov [Thu, 15 Jun 2006 16:11:15 +0000 (20:11 +0400)] 
[PATCH] check_process_timers: fix possible lockup

If the local timer interrupt happens just after do_exit() sets PF_EXITING
(and before it clears ->it_xxx_expires) run_posix_cpu_timers() will call
check_process_timers() with tasklist_lock + ->siglock held and

check_process_timers:

t = tsk;
do {
....

do {
t = next_thread(t);
} while (unlikely(t->flags & PF_EXITING));
} while (t != tsk);

the outer loop will never stop.

Actually, the window is bigger.  Another process can attach the timer
after ->it_xxx_expires was cleared (see the next commit) and the 'if
(PF_EXITING)' check in arm_timer() is racy (see the one after that).

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sky2: netconsole suspend/resume interaction
Stephen Hemminger [Fri, 16 Jun 2006 19:10:46 +0000 (12:10 -0700)] 
[PATCH] sky2: netconsole suspend/resume interaction

A couple of fixes that should prevent crashes when using netconsole and
suspend/resume. First, netconsole poll routine shouldn't run unless the
device is up; second, the NAPI poll should be disabled during suspend.

This is only an issue on sky2, because it has to have one NAPI poll
routine for both ports on dual port boards. Normal drivers use
netif_rx_schedule_prep and that checks for netif_running.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix missing ret assignment in __bio_map_user() error path
Jens Axboe [Fri, 16 Jun 2006 11:02:29 +0000 (13:02 +0200)] 
[PATCH] Fix missing ret assignment in __bio_map_user() error path

If get_user_pages() returns less pages than what we asked for, we jump
to out_unmap which will return ERR_PTR(ret).  But ret can contain a
positive number just smaller than local_nr_pages, so be sure to set it
to -EFAULT always.

Problem found and diagnosed by Damien Le Moal <damien@sdl.hitachi.co.jp>

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fix cdrom open
Jens Axboe [Fri, 16 Jun 2006 05:46:37 +0000 (07:46 +0200)] 
[PATCH] fix cdrom open

Some time ago the cdrom open routine was changed so that we call the
driver's open routine before checking to see if it is read only.  However,
if we discovered that a read write open was not possible and the open
flags required a writable open, we just returned -EROFS without calling
the driver's release routine.   This seems to work for most cdrom drivers,
but breaks the Powerpc iSeries virtual cdrom rather badly.

This just inserts the release call in the error path to balance the call
to "->open()" done by "open_for_data()".

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] cfq-iosched: fix crash in do_div()
Jens Axboe [Wed, 14 Jun 2006 17:11:57 +0000 (19:11 +0200)] 
[PATCH] cfq-iosched: fix crash in do_div()

We don't clear the seek stat values in cfq_alloc_io_context(), and if
->seek_mean is unlucky enough to be set to -36 by chance, the first
invocation of cfq_update_io_seektime() will oops with a divide by zero
in do_div().

Just memset the entire cic instead of filling invididual values
independently.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Return error in case flock_lock_file failure
Kirill Korotaev [Wed, 14 Jun 2006 13:59:35 +0000 (17:59 +0400)] 
[PATCH] Return error in case flock_lock_file failure

If flock_lock_file() failed to allocate flock with locks_alloc_lock()
then "error = 0" is returned. Need to return some non-zero.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sky2: stop/start hardware idle timer on suspend/resume
Stephen Hemminger [Tue, 13 Jun 2006 08:17:31 +0000 (17:17 +0900)] 
[PATCH] sky2: stop/start hardware idle timer on suspend/resume

The resume bug was caused not by an early interrupt but because the idle
timeout was not being stopped on suspend.  Also disable hardware IRQ's
on suspend.  Will need to revisit this with hotplug?

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sky2: save/restore base hardware irq during suspend/resume
Stephen Hemminger [Tue, 13 Jun 2006 08:17:30 +0000 (17:17 +0900)] 
[PATCH] sky2: save/restore base hardware irq during suspend/resume

The hardware should be fully shut off during suspend, and the base
irq mask restored during resume.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sky2: fix hotplug detect during poll
Stephen Hemminger [Tue, 13 Jun 2006 08:17:29 +0000 (17:17 +0900)] 
[PATCH] sky2: fix hotplug detect during poll

If the poll routine detects no hardware available, it needs to dequeue
it self from the network poll list. Linus didn't understand NAPI.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sky2: don't hard code number of ports
Stephen Hemminger [Tue, 13 Jun 2006 08:17:28 +0000 (17:17 +0900)] 
[PATCH] sky2: don't hard code number of ports

It is cleaner, to not loop over both ports if only one exists.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sky2: set_power_state should be void
Stephen Hemminger [Tue, 13 Jun 2006 08:17:27 +0000 (17:17 +0900)] 
[PATCH] sky2: set_power_state should be void

The set power state function is cleaner if it doesn't return anything.
The only caller that could fail is in suspend() and it can check the argument
there.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] alpha: generic hweight build fix
Randy Dunlap [Mon, 12 Jun 2006 22:13:40 +0000 (15:13 -0700)] 
[PATCH] alpha: generic hweight build fix

From: Randy Dunlap <rdunlap@xenotime.net>

According to include/asm-alpha/bitops.h, only ALPHA_EV67 has hardware
hweight support, so ALPHA_EV6 needs to use GENERIC_HWEIGHT.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ernst Herzberg <earny@net4u.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] tmpfs: Decrement i_nlink correctly in shmem_rmdir()
Sergey Vlasov [Mon, 12 Jun 2006 20:53:23 +0000 (21:53 +0100)] 
[PATCH] tmpfs: Decrement i_nlink correctly in shmem_rmdir()

shmem_rmdir() must undo the increment of i_nlink done in
shmem_get_inode() for directories, otherwise at least
IN_DELETE_SELF inotify event generation is broken.

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] tmpfs: time granularity fix for [acm]time going backwards
Robin H. Johnson [Mon, 12 Jun 2006 20:50:25 +0000 (21:50 +0100)] 
[PATCH] tmpfs: time granularity fix for [acm]time going backwards

I noticed a strange behavior in a tmpfs file system the other day, while
building packages - occasionally, and seemingly at random, make decided to
rebuild a target. However, only on tmpfs.

A file would be created, and if checked, it had a sub-second timestamp.
However, after an utimes related call where sub-seconds should be set, they
were zeroed instead. In the case that a file was created, and utimes(...,NULL)
was used on it in the same second, the timestamp on the file moved backwards.

After some digging, I found that this was being caused by tmpfs not having a
time granularity set, thus inheriting the default 1 second granularity.

Hugh adds: yes, we missed tmpfs when the s_time_gran mods went into 2.6.11.
Unfortunately, the granularity of CURRENT_TIME, often used in filesystems,
does not match the default granularity set by alloc_super.  A few more such
discrepancies have been found, but this is the most important to fix now.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 12 Jun 2006 20:46:43 +0000 (13:46 -0700)] 
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULE

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 12 Jun 2006 20:46:27 +0000 (13:46 -0700)] 
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV4]: Increment ipInHdrErrors when TTL expires.
  [TCP]: continued: reno sacked_out count fix
  [DCCP] Ackvec: fix soft lockup in ackvec handling code

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 12 Jun 2006 20:45:41 +0000 (13:45 -0700)] 
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix Integrator and Versatile interrupt initialisation
  [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX
  [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget
  [ARM] Fix Neponset IRQ handling

18 years ago[IPV4]: Increment ipInHdrErrors when TTL expires.
Weidong [Mon, 12 Jun 2006 20:09:59 +0000 (13:09 -0700)] 
[IPV4]: Increment ipInHdrErrors when TTL expires.

Signed-off-by: Weidong <weid@nanjing-fnst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[sky2] Fix sky2 network driver suspend/resume
Linus Torvalds [Mon, 12 Jun 2006 19:53:27 +0000 (12:53 -0700)] 
[sky2] Fix sky2 network driver suspend/resume

This fixes two independent problems: it would not save the PCI state on
suspend (and thus try to resume a nonexistent state on resume), and
while shut off, if an interrupt happened on the same shared irq, the irq
handler would react very badly to the interrupt status being an invalid
all-ones state.

Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Mon, 12 Jun 2006 14:47:04 +0000 (07:47 -0700)] 
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] sata_mv: grab host lock inside eng_timeout

18 years ago[TCP]: continued: reno sacked_out count fix
Aki M Nyrhinen [Mon, 12 Jun 2006 04:18:56 +0000 (21:18 -0700)] 
[TCP]: continued: reno sacked_out count fix

From: Aki M Nyrhinen <anyrhine@cs.helsinki.fi>

IMHO the current fix to the problem (in_flight underflow in reno)
is incorrect.  it treats the symptons but ignores the problem. the
problem is timing out packets other than the head packet when we
don't have sack. i try to explain (sorry if explaining the obvious).

with sack, scanning the retransmit queue for timed out packets is
fine because we know which packets in our retransmit queue have been
acked by the receiver.

without sack, we know only how many packets in our retransmit queue the
receiver has acknowledged, but no idea which packets.

think of a "typical" slow-start overshoot case, where for example
every third packet in a window get lost because a router buffer gets
full.

with sack, we check for timeouts on those every third packet (as the
rest have been sacked). the packet counting works out and if there
is no reordering, we'll retransmit exactly the packets that were
lost.

without sack, however, we check for timeout on every packet and end up
retransmitting consecutive packets in the retransmit queue. in our
slow-start example, 2/3 of those retransmissions are unnecessary. these
unnecessary retransmissions eat the congestion window and evetually
prevent fast recovery from continuing, if enough packets were lost.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] Ackvec: fix soft lockup in ackvec handling code
Andrea Bittau [Mon, 12 Jun 2006 03:58:33 +0000 (20:58 -0700)] 
[DCCP] Ackvec: fix soft lockup in ackvec handling code

A soft lockup existed in the handling of ack vector records.
Specifically, when a tail of the list of ack vector records was
removed, it was possible to end up iterating infinitely on an element
of the tail.

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULE
David S. Miller [Mon, 12 Jun 2006 04:00:46 +0000 (21:00 -0700)] 
[SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULE

It is already exported by fs/open.c

Noticed by Ben Collins.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PATCH] Fix for the PPTP hangs that have been reported
Paul Mackerras [Mon, 12 Jun 2006 02:16:26 +0000 (12:16 +1000)] 
[PATCH] Fix for the PPTP hangs that have been reported

People have been reporting that PPP connections over ptys, such as
used with PPTP, will hang randomly when transferring large amounts of
data, for instance in http://bugzilla.kernel.org/show_bug.cgi?id=6530.
I have managed to reproduce the problem, and the patch below fixes the
actual cause.

The problem is not in fact in ppp_async.c but in n_tty.c.  What
happens is that when pptp reads from the pty, we call read_chan() in
drivers/char/n_tty.c on the master side of the pty.  That copies all
the characters out of its buffer to userspace and then calls
check_unthrottle(), which calls the pty unthrottle routine, which
calls tty_wakeup on the slave side, which calls ppp_asynctty_wakeup,
which calls tasklet_schedule.  So far so good.  Since we are in
process context, the tasklet runs immediately and calls
ppp_async_process(), which calls ppp_async_push, which calls the
tty->driver->write function to send some more output.

However, tty->driver->write() returns zero, because the master
tty->receive_room is still zero.  We haven't returned from
check_unthrottle() yet, and read_chan() only updates tty->receive_room
_after_ calling check_unthrottle.  That means that the driver->write
call in ppp_async_process() returns 0.  That would be fine if we were
going to get a subsequent wakeup call, but we aren't (we just had it,
and the buffer is now empty).

The solution is for n_tty.c to update tty->receive_room _before_
calling the driver unthrottle routine.  The patch below does this.
With this patch I was able to transfer a 900MB file over a PPTP
connection (taking about 25 minutes), whereas without the patch the
connection would always stall in under a minute.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sata_mv: grab host lock inside eng_timeout
Mark Lord [Wed, 7 Jun 2006 16:53:29 +0000 (12:53 -0400)] 
[PATCH] sata_mv: grab host lock inside eng_timeout

Bug fix:  mv_eng_timeout() calls mv_err_intr() without first grabbing the host lock,
which can lead to all sorts of interesting scenarios.

This whole error-handling portion of sata_mv is nasty (and will get fixed for
the new EH stuff), but for now this patch will help keep it on life-support.

Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Sun, 11 Jun 2006 22:28:04 +0000 (15:28 -0700)] 
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  [PATCH] PCI: reverse pci config space restore order
  [PATCH] PCI: Improve PCI config space writeback
  [PATCH] PCI: Error handling on PCI device resume
  [PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabled

18 years ago[PATCH] typo in vmscan.c
Christoph Lameter [Sun, 11 Jun 2006 22:22:26 +0000 (15:22 -0700)] 
[PATCH] typo in vmscan.c

From: Christoph Lameter <clameter@sgi.com>

Looks like a comma was left from the conversion from a struct to an
assignment.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] PCI: reverse pci config space restore order
Yu, Luming [Tue, 25 Apr 2006 07:00:34 +0000 (00:00 -0700)] 
[PATCH] PCI: reverse pci config space restore order

According to Intel ICH spec, there are several rules that Base Address
should be programmed before IOSE  (PCICMD register ) enabled.

For example ICH7:

12.1.3  SATA : the base address register for the bus master register
               should be programmed before this bit is set.

11.1.3:  PCICMD (USB): The base address register for USB should be
                       programmed before this bit is set.
....

To make sure kernel code follow this rule , and prevent unnecessary
confusion. I proposal this patch.

Signed-off-by: Luming Yu <luming.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Improve PCI config space writeback
Dave Jones [Wed, 19 Apr 2006 04:06:51 +0000 (21:06 -0700)] 
[PATCH] PCI: Improve PCI config space writeback

At least one laptop blew up on resume from suspend with a black screen due
to a lack of this patch.  By only writing back config space that is
different, we minimise the possibility of accidents like this.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Error handling on PCI device resume
Jean Delvare [Tue, 18 Apr 2006 12:49:56 +0000 (14:49 +0200)] 
[PATCH] PCI: Error handling on PCI device resume

We currently don't handle errors properly when resuming a PCI device:
* In pci_default_resume() we capture the error code returned by
  pci_enable_device() but don't pass it up to the caller.
  Introduced by commit 95a629657dbe28e44a312c47815b3dc3f1ce0970
* In pci_resume_device(), the errors possibly returned by the driver's
  .resume method or by the generic pci_default_resume() function are
  ignored.

This patch fixes both issues.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabled
akpm@osdl.org [Sat, 13 May 2006 15:30:52 +0000 (08:30 -0700)] 
[PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabled

Fix build error when CONFIG_ACPI not defined

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[SPARC]: Migration cost tune up in sparc smp.
Krzysztof Helt [Sun, 11 Jun 2006 05:03:43 +0000 (22:03 -0700)] 
[SPARC]: Migration cost tune up in sparc smp.

This patch sets the max_cache_size value required to tune up
scheduler in SMP systems. Otherwise, the calculated
migration_cost is too high and task scheduling may lock up.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: Set appropriate max_cache_size.
David S. Miller [Sun, 11 Jun 2006 05:02:17 +0000 (22:02 -0700)] 
[SPARC64]: Set appropriate max_cache_size.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sat, 10 Jun 2006 18:03:51 +0000 (11:03 -0700)] 
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Avoid JBUS errors on some Niagara systems.
  [FUSION]: Fix mptspi.c build with CONFIG_PM not set.
  [TG3]: Handle Sun onboard tg3 chips more correctly.
  [SPARC64]: Dump local cpu registers in sun4v_log_error()

18 years ago[PATCH] powerpc: console_initcall ordering issues
Milton Miller [Sat, 10 Jun 2006 16:54:16 +0000 (09:54 -0700)] 
[PATCH] powerpc: console_initcall ordering issues

From: Milton Miller <miltonm@bga.com>

The add_preferred_console call in rtas_console.c was not causing the
console to be selected.  It turns out that the add_preferred_console was
being called after the hvc_console driver was registered.  It only works
when it is called before the console driver is registered.

Reorder hvc_console.o after the hvc_console drivers to allow the selection
during console_initcall processing.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] I2O: Bugfixes to get I2O working again
Markus Lidel [Sat, 10 Jun 2006 16:54:14 +0000 (09:54 -0700)] 
[PATCH] I2O: Bugfixes to get I2O working again

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

- Fixed locking of struct i2o_exec_wait in Executive-OSM

- Removed LCT Notify in i2o_exec_probe() which caused freeing memory and
  accessing freed memory during first enumeration of I2O devices

- Added missing locking in i2o_exec_lct_notify()

- removed put_device() of I2O controller in i2o_iop_remove() which caused
  the controller structure get freed to early

- Fixed size of mempool in i2o_iop_alloc()

- Fixed access to freed memory in i2o_msg_get()

See http://bugzilla.kernel.org/show_bug.cgi?id=6561

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] powernow-k8 crash workaround
Andrew Morton [Sat, 10 Jun 2006 16:54:13 +0000 (09:54 -0700)] 
[PATCH] powernow-k8 crash workaround

From: Andrew Morton <akpm@osdl.org>

Work around the oops reported in
http://bugzilla.kernel.org/show_bug.cgi?id=6478.

Thanks to Ralf Hildebrandt <ralf.hildebrandt@charite.de> for testing and
reporting.

Acked-by: Dave Jones <davej@codemonkey.org.uk>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Further alterations for memory barrier document
David Howells [Sat, 10 Jun 2006 16:54:12 +0000 (09:54 -0700)] 
[PATCH] Further alterations for memory barrier document

From: David Howells <dhowells@redhat.com>

Apply some alterations to the memory barrier document that I worked out
with Paul McKenney of IBM, plus some of the alterations suggested by Alan
Stern.

The following changes were made:

 (*) One of the examples given for what can happen with overlapping memory
     barriers was wrong.

 (*) The description of general memory barriers said that a general barrier is
     a combination of a read barrier and a write barrier.  This isn't entirely
     true: it implies both, but is more than a combination of both.

 (*) The first example in the "SMP Barrier Pairing" section was wrong: the
     loads around the read barrier need to touch the memory locations in the
     opposite order to the stores around the write barrier.

 (*) Added a note to make explicit that the loads should be in reverse order to
     the stores.

 (*) Adjusted the diagrams in the "Examples Of Memory Barrier Sequences"
     section to make them clearer.  Added a couple of diagrams to make it more
     clear as to how it could go wrong without the barrier.

 (*) Added a section on memory speculation.

 (*) Dropped any references to memory allocation routines doing memory
     barriers.  They may do sometimes, but it can't be relied on.  This may be
     worthy of further documentation later.

 (*) Made the fact that a LOCK followed by an UNLOCK should not be considered a
     full memory barrier more explicit and gave an example.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Sat, 10 Jun 2006 17:59:39 +0000 (10:59 -0700)] 
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: Fix cell blade detection
  [PATCH] powerpc: Fix call to ibm,client-architecture-support
  powerpc: Fix machine check problem on 32-bit kernels

18 years ago[ARM] Fix Integrator and Versatile interrupt initialisation
Russell King [Sat, 10 Jun 2006 11:42:12 +0000 (12:42 +0100)] 
[ARM] Fix Integrator and Versatile interrupt initialisation

Both Integrator and Versatile were using set_irq_handler() and
enable_irq(), and working around the initialisation of the
chained interrupt, instead of the more correct
set_irq_chained_handler() function.  Fix Integrator and
Versatile to use the right function, and remove these work-arounds.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[SPARC64]: Avoid JBUS errors on some Niagara systems.
David S. Miller [Sat, 10 Jun 2006 08:06:25 +0000 (01:06 -0700)] 
[SPARC64]: Avoid JBUS errors on some Niagara systems.

Doing PCI config space accesses to non-present PCI slots
can result in fatal JBUS errors if the PCI config access
hypervisor call is performed on cpus other than the boot
cpu.

PCI config space accesses to present PCI slots works just
fine.

Recursively traverse the OBP device tree under the PCI
controller node and record all present device IDs into
a small hash table.

Avoid the hypervisor call for any PCI config space access
attempt for a device not recorded in the hash table.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[FUSION]: Fix mptspi.c build with CONFIG_PM not set.
Tom "spot" Callaway [Sat, 10 Jun 2006 00:01:48 +0000 (17:01 -0700)] 
[FUSION]: Fix mptspi.c build with CONFIG_PM not set.

Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TG3]: Handle Sun onboard tg3 chips more correctly.
David S. Miller [Fri, 9 Jun 2006 18:58:36 +0000 (11:58 -0700)] 
[TG3]: Handle Sun onboard tg3 chips more correctly.

Get rid of all the SUN_570X logic and instead:

1) Make sure MEMARB_ENABLE is set when we probe the SRAM
   for config information.  If that is off we will get
   timeouts.

2) Always try to sync with the firmware, if there is no
   firmware running do not treat it as an error and instead
   just report it the first time we notice this condition.

3) If there is no valid SRAM signature, assume the device
   is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT.

Update driver version and release date.

With help from Michael Chan and Fabio Massimo Di Nitto.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: Dump local cpu registers in sun4v_log_error()
David S. Miller [Wed, 7 Jun 2006 00:37:41 +0000 (17:37 -0700)] 
[SPARC64]: Dump local cpu registers in sun4v_log_error()

This makes the debugging information more usable.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PATCH] powerpc: Fix cell blade detection
Arnd Bergmann [Wed, 7 Jun 2006 02:04:18 +0000 (12:04 +1000)] 
[PATCH] powerpc: Fix cell blade detection

The IBM Cell blade firmware might confuse the kernel to think it's a
pSeries machine. This fixes it for now. With a bit of luck, the firmware
will be updated to avoid that in the future but currently that patch is
needed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[PATCH] powerpc: Fix call to ibm,client-architecture-support
Benjamin Herrenschmidt [Wed, 7 Jun 2006 02:01:32 +0000 (12:01 +1000)] 
[PATCH] powerpc: Fix call to ibm,client-architecture-support

The code in prom_init.c calling the firmware
ibm,client-architecture-support method on pSeries has a bug where it
fails to properly pass the instance handle of the firmware object when
trying to call a method. Result ranges from the call doing nothing to
the firmware crashing. (Found by Segher, thanks !)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years agopowerpc: Fix machine check problem on 32-bit kernels
Paul Mackerras [Fri, 9 Jun 2006 03:02:59 +0000 (13:02 +1000)] 
powerpc: Fix machine check problem on 32-bit kernels

This fixes a bug found by Dave Jones that means that it is possible
for userspace to provoke a machine check on 32-bit kernels.  This
also fixes a couple of other places where I found similar problems
by inspection.

Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 8 Jun 2006 22:16:35 +0000 (15:16 -0700)] 
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: remove risky prefetch on next_skb->data
  e1000: fix ethtool test irq alloc as "probe"
  [PATCH] bcm43xx: add DMA rx poll workaround to DMA4

18 years ago[PATCH] s390: fix in-user atomic futex operation.
Martin Schwidefsky [Thu, 8 Jun 2006 08:36:20 +0000 (01:36 -0700)] 
[PATCH] s390: fix in-user atomic futex operation.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

__futex_atomic_op needs to do an atomic operation in the user address space,
not the kernel address space.  Add the missing sacf 256/sacf 0 to switch to
the secondary mode before doing the compare-and-swap.  In addition add
another fixup for catch specification exceptions if the compare-and-swap
address is not aligned.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] debugfs inode leak
Jens Axboe [Thu, 8 Jun 2006 08:26:39 +0000 (10:26 +0200)] 
[PATCH] debugfs inode leak

Looking at the reiser4 crash, I found a leak in debugfs. In
debugfs_mknod(), we create the inode before checking if the dentry
already has one attached. We don't free it if that is the case.

These bugs happen quite often, I'm starting to think we should disallow
such coding in CodingStyle.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] elevator switching race
Jens Axboe [Thu, 8 Jun 2006 06:49:06 +0000 (08:49 +0200)] 
[PATCH] elevator switching race

There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fbcon: fix limited scroll in SCROLL_PAN_REDRAW mode
Malcom Parsons [Thu, 8 Jun 2006 07:43:42 +0000 (00:43 -0700)] 
[PATCH] fbcon: fix limited scroll in SCROLL_PAN_REDRAW mode

From: Malcom Parsons <malcolm.parsons@gmail.com>

When scrolling up in SCROLL_PAN_REDRAW mode with a large limited scroll
region, the bottom few lines have to be redrawn.  Without this patch, the
wrong text is drawn into these lines, corrupting the display.

Observed in 2.6.14 when running an IRC client in the Nintendo DS linux
port.

I haven't tested if scrolling down has the same problem.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix mempolicy.h build error
Ralf Baechle [Thu, 8 Jun 2006 07:43:41 +0000 (00:43 -0700)] 
[PATCH] Fix mempolicy.h build error

From: Ralf Baechle <ralf@linux-mips.org>

<linux/mempolicy.h> uses struct mm_struct and relies on a definition or
declaration somehow magically being dragged in which may result in a
build:

[...]
  CC      mm/mempolicy.o
In file included from mm/mempolicy.c:69:
include/linux/mempolicy.h:150: warning: Ã¢\80\98struct mm_structâ\80\99 declared inside parameter list
include/linux/mempolicy.h:150: warning: its scope is only this definition or declaration, which is probably not what you want
include/linux/mempolicy.h:175: warning: Ã¢\80\98struct mm_structâ\80\99 declared inside parameter list
mm/mempolicy.c:622: error: conflicting types for Ã¢\80\98do_migrate_pagesâ\80\99
include/linux/mempolicy.h:175: error: previous declaration of Ã¢\80\98do_migrate_pagesâ\80\99 was here
mm/mempolicy.c:1661: error: conflicting types for Ã¢\80\98mpol_rebind_mmâ\80\99
include/linux/mempolicy.h:150: error: previous declaration of Ã¢\80\98mpol_rebind_mmâ\80\99 was here
make[1]: *** [mm/mempolicy.o] Error 1
make: *** [mm] Error 2
[ralf@denk linux-ip35]$

Including <linux/sched.h> is a step into direction of include hell so
fixed by adding a forward declaration of struct mm_struct instead.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] ep93xx build fix
Lennert Buytenhek [Thu, 8 Jun 2006 07:43:40 +0000 (00:43 -0700)] 
[PATCH] ep93xx build fix

From: Lennert Buytenhek <buytenh@wantstofly.org>

The recent renaming of m48t86's ->readb() and ->writeb() platform driver
methods (2d7b20c1884777e66009be1a533641c19c4705f6) to ->readbyte() and
->writebyte() to fix the ia64 build broke the build of the cirrus ep93xx
ARM platform.  This patch fixes it up.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix HPET operation on 64-bit NVIDIA platforms
Andy Currid [Thu, 8 Jun 2006 07:43:39 +0000 (00:43 -0700)] 
[PATCH] Fix HPET operation on 64-bit NVIDIA platforms

From: "Andy Currid" <ACurrid@nvidia.com>

This patch fixes a kernel panic during boot that occurs on NVIDIA platforms
that have HPET enabled.

When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is
advertised as such in the ACPI APIC table - but an earlier workaround in the
kernel was ignoring this override.  The fix is to honor timer IRQ overrides
from ACPI when HPET is detected on an NVIDIA platform.

Signed-off-by: Andy Currid <acurrid@nvidia.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Yu, Luming" <luming.yu@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix HPET operation on 32-bit NVIDIA platforms
Andy Currid [Thu, 8 Jun 2006 07:43:38 +0000 (00:43 -0700)] 
[PATCH] Fix HPET operation on 32-bit NVIDIA platforms

From: "Andy Currid" <ACurrid@nvidia.com>

This patch fixes a kernel panic during boot that occurs on NVIDIA platforms
that have HPET enabled.

When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is
advertised as such in the ACPI APIC table - but an earlier workaround in the
kernel was ignoring this override.  The fix is to honor timer IRQ overrides
from ACPI when HPET is detected on an NVIDIA platform.

Signed-off-by: Andy Currid <acurrid@nvidia.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Yu, Luming" <luming.yu@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX
Matt Reimer [Thu, 8 Jun 2006 21:46:48 +0000 (22:46 +0100)] 
[ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX

Patch from Matt Reimer

There is a subtle bug in the GPIO interrupt status register
handling in arch/arm/mach-imx/irq.c:imx_gpio_ack_irq(). The
documentation states that a 1 should be written to the relevant bit to
acknowledge a GPIO interrupt, but that is not what the code does.

The problem is that the |= writes back 1s for all the *other*
interrupts represented in the register, so interrupts could get lost.
For example, if interrupts are pending for GPIO B10 and B12, ISR_B
would have the value 0x00001400. Then when the interrupt code handles
GPIO B10, it eventually calls imx_gpio_ack_irq(IRQ_GPIOB(10)), which
effectively does this:

ISR_B |= 1 << 10;

with the result that (0x00001400 | 0x00000400) is written, clearing
the interrupt status bits for *both* GPIO B10 and B12.

The fix is to write 1s only for the interrupts we want to clear.

The same problem seems to be occurring in the DMA code; this patch
does not address those issues.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget
Richard Purdie [Thu, 8 Jun 2006 21:44:07 +0000 (22:44 +0100)] 
[ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget

Patch from Richard Purdie

Add a power budget variable to the PXA OHCI platform data and add a
default value for the spitz platform(s) which prevents known failures
with certain USB devices.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years agoMerge branch 'upstream-fixes' of git://lost.foo-projects.org/~ahkok/git/netdev-2...
Jeff Garzik [Thu, 8 Jun 2006 19:49:36 +0000 (15:49 -0400)] 
Merge branch 'upstream-fixes' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes

18 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linvil...
Jeff Garzik [Thu, 8 Jun 2006 19:46:27 +0000 (15:46 -0400)] 
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream-fixes

18 years ago[ARM] Fix Neponset IRQ handling
Russell King [Thu, 8 Jun 2006 16:59:31 +0000 (17:59 +0100)] 
[ARM] Fix Neponset IRQ handling

While testing the genirq code on ARM, a condition was found whereby
the Neponset IRQ handler was being re-entered, causing the system
to deadlock.

Under the ARM IRQ code, this would not have been a visible problem
because the "simple" IRQ handling had no re-entrancy protection.

Resolve this by acknowledging the parent interrupt after we mask it
when we are going to handle one of our "special" level-based sources
(from ethernet or USAR chip.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years agoe1000: remove risky prefetch on next_skb->data
Auke Kok [Thu, 8 Jun 2006 16:28:47 +0000 (09:28 -0700)] 
e1000: remove risky prefetch on next_skb->data

It was brought to our attention that the prefetches break e1000 traffic
on xscale/arm architectures.  Remove them for now.  We'll let them
stay in mm for a while, or find a better solution to enable.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
18 years agoe1000: fix ethtool test irq alloc as "probe"
Auke Kok [Thu, 8 Jun 2006 16:28:38 +0000 (09:28 -0700)] 
e1000: fix ethtool test irq alloc as "probe"

New code added in 2.6.17 caused setup_irq to print a warning when
running ethtool -t eth0 offline.

This test marks the request_irq call made by this test as a "probe"
to see if the interrupt is shared or not.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
18 years agoLinux 2.6.17-rc6 v2.6.17-rc6
Linus Torvalds [Tue, 6 Jun 2006 00:57:02 +0000 (17:57 -0700)] 
Linux 2.6.17-rc6

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 5 Jun 2006 23:59:46 +0000 (16:59 -0700)] 
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BRIDGE]: fix locking and memory leak in br_add_bridge
  [IRDA]: Missing allocation result check in irlap_change_speed().
  [PPPOE]: Missing result check in __pppoe_xmit().
  [NET]: Eliminate unused /proc/sys/net/ethernet
  [NETCONSOLE]: Clean up initcall warning.
  [TCP]: Avoid skb_pull if possible when trimming head

18 years ago[BRIDGE]: fix locking and memory leak in br_add_bridge
Jiri Benc [Mon, 5 Jun 2006 23:39:34 +0000 (16:39 -0700)] 
[BRIDGE]: fix locking and memory leak in br_add_bridge

There are several bugs in error handling in br_add_bridge:
- when dev_alloc_name fails, allocated net_device is not freed
- unregister_netdev is called when rtnl lock is held
- free_netdev is called before netdev_run_todo has a chance to be run after
  unregistering net_device

Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Mon, 5 Jun 2006 23:23:02 +0000 (16:23 -0700)] 
Merge master.kernel.org:/home/rmk/linux-2.6-serial

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] typo: buad -> baud

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Mon, 5 Jun 2006 23:22:43 +0000 (16:22 -0700)] 
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy
  [MMC] Add maintainers entry for MMC subsystem

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 5 Jun 2006 23:22:26 +0000 (16:22 -0700)] 
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3543/1: [Fwd: PXA270 bootparams address not set]
  [ARM] Trivial typo fixes

18 years ago[MIPS] Fix sparsemem support.
Chad Reese [Wed, 31 May 2006 00:16:49 +0000 (17:16 -0700)] 
[MIPS] Fix sparsemem support.

Move memory_present() in arch/mips/kernel/setup.c. When using sparsemem
extreme, this function does an allocate for bootmem. This would always
fail since init_bootmem hasn't been called yet.

Move memory_present after free_bootmem. This only marks actual memory
ranges as present instead of the entire address space.

Signed-off-by: Chad Reese <creese@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix compiler warnings (field width, unused variable)
Atsushi Nemoto [Wed, 31 May 2006 16:00:03 +0000 (01:00 +0900)] 
[MIPS] Fix compiler warnings (field width, unused variable)

Fix following warnings:
linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 2)
linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 4)
linux/arch/mips/kernel/syscall.c:279: warning: unused variable `len'
linux/arch/mips/kernel/syscall.c:280: warning: unused variable `name'
linux/arch/mips/math-emu/dp_fint.c:32: warning: unused variable `xc'
linux/arch/mips/math-emu/dp_flong.c:32: warning: unused variable `xc'
linux/arch/mips/math-emu/sp_fint.c:32: warning: unused variable `xc'
linux/arch/mips/math-emu/sp_flong.c:32: warning: unused variable `xc'

(original patch by Atsushi, slight changes to the setup.c part by me.)

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix sparse warnings about too big constants.
Atsushi Nemoto [Wed, 31 May 2006 16:00:39 +0000 (01:00 +0900)] 
[MIPS] Fix sparse warnings about too big constants.

Fix following warnings:
linux/arch/mips/kernel/setup.c:249:12: warning: constant 0xffffffff00000000 is so big it is unsigned long
linux/arch/mips/kernel/cpu-bugs64.c:209:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long
linux/arch/mips/kernel/cpu-bugs64.c:227:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long
linux/arch/mips/kernel/cpu-bugs64.c:283:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long
linux/arch/mips/kernel/cpu-bugs64.c:299:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix 64-bit build for RM7000.
Ralf Baechle [Tue, 30 May 2006 14:55:05 +0000 (15:55 +0100)] 
[MIPS] Fix 64-bit build for RM7000.

RM7000 has 40-bit virtual / 36-bit physical address space.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] IP32: Fix warnings.
Ralf Baechle [Tue, 30 May 2006 01:13:16 +0000 (02:13 +0100)] 
[MIPS] IP32: Fix warnings.

The expressions are volatile; no need for temporary variables.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix non-linear memory mapping on MIPS
Sergei Shtylyov [Sat, 27 May 2006 18:39:39 +0000 (22:39 +0400)] 
[MIPS] Fix non-linear memory mapping on MIPS

Fix the non-linear memory mapping done via remap_file_pages() -- it
didn't work on any MIPS CPU because the page offset clashing with
_PAGE_FILE and some other page protection bits which should have been left
zeros for this kind of pages.

Signed-off-by: Konstantin Baydarov <kbaidarov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] SB1: Only pass1 FPUs are broken beyond recovery.
Ralf Baechle [Sun, 28 May 2006 23:02:12 +0000 (00:02 +0100)] 
[MIPS] SB1: Only pass1 FPUs are broken beyond recovery.

The wrong revision number in the check was forcing a fallback to FPU
emulation for all SB1 cores in 2.6.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] open() forces O_LARGEFILE for o32 on 64bit kernels
Thiemo Seufer [Sun, 28 May 2006 14:02:53 +0000 (15:02 +0100)] 
[MIPS] open() forces O_LARGEFILE for o32 on 64bit kernels

open() always sets the O_LARGEFILE flag for the o32 ABI implementation
of a 64bit kernel. The appended patch fixes it.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Au1xx0: fix prom_getenv() to handle YAMON style environment
Sergei Shtylyov [Sat, 27 May 2006 19:36:41 +0000 (23:36 +0400)] 
[MIPS] Au1xx0: fix prom_getenv() to handle YAMON style environment

Alchemy boards use YAMON which passes the environment variables as the
tuples of strings (the name followed by the value) unlike PMON which
passes "name=<val>" strings.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix swap entry for MIPS32 36-bit physical address
Sergei Shtylyov [Sat, 27 May 2006 16:43:04 +0000 (20:43 +0400)] 
[MIPS] Fix swap entry for MIPS32 36-bit physical address

With 64-bit physical address enabled, 'swapon' was causing kernel oops on
Alchemy CPUs (MIPS32) because of the swap entry type field corrupting the
_PAGE_FILE bit in 'pte_low' field. So, switch to storing the swap entry in
'pte_high' field using all its bits except _PAGE_GLOBAL and _PAGE_VALID which
gives 25 bits for the swap entry offset.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix mprotect() syscall for MIPS32 w/36-bit physical address support
Sergei Shtylyov [Wed, 3 May 2006 18:56:43 +0000 (22:56 +0400)] 
[MIPS] Fix mprotect() syscall for MIPS32 w/36-bit physical address support

Fix mprotect() syscall for MIPS32 CPUs with 36-bit physical address
support: pte_modify() macro didn't clear the hardware page protection bits
before modifying...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Save write-only Config.OD from being clobbered
Sergei Shtylyov [Fri, 26 May 2006 15:44:54 +0000 (19:44 +0400)] 
[MIPS] Save write-only Config.OD from being clobbered

Save the Config.OD bit from being clobbered by coherency_setup(). This
bit, when set, fixes various errata in the early steppings of Au1x00
SOCs.  Unfortunately, the bit was write-only on the most early of them.
In addition, also restore the bit after a wakeup from sleep.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Print more information if we're struck by a machine check exception.
Ralf Baechle [Wed, 24 May 2006 15:51:02 +0000 (16:51 +0100)] 
[MIPS] Print more information if we're struck by a machine check exception.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix declaration of smp_prepare_cpus() platform hook.
Ralf Baechle [Wed, 24 May 2006 02:04:18 +0000 (03:04 +0100)] 
[MIPS] Fix declaration of smp_prepare_cpus() platform hook.

A while ago prom_prepare_cpus was replaced by plat_prepare_cpus but
the declaration has stayed unchanged.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix modpost warning: Rename op_model_xxx to op_model_xxx_ops.
Atsushi Nemoto [Tue, 23 May 2006 07:42:38 +0000 (16:42 +0900)] 
[MIPS] Fix modpost warning: Rename op_model_xxx to op_model_xxx_ops.

The modpost uses a whitelist for commonly used suffix on checking the
section mismatch.  Adding "_ops" suffix to op_modex_xxx get rid of
this modpost warning.

WARNING: arch/mips/oprofile/oprofile.o - Section mismatch: reference to .init.text: from .data after 'op_model_mipsxx' (at offset 0x528)

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix instable BogoMIPS on multi-issue processors.
Ralf Baechle [Tue, 23 May 2006 15:37:32 +0000 (16:37 +0100)] 
[MIPS] Fix instable BogoMIPS on multi-issue processors.

Increase alignment of BogoMIPS loop to 8 bytes.  Having the delay loop
overlap cache line boundaries may cause instable delays.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Ignore unresolved weak symbols in modules.
Atsushi Nemoto [Mon, 22 May 2006 15:45:07 +0000 (00:45 +0900)] 
[MIPS] Ignore unresolved weak symbols in modules.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix SMP now that fixup_cpu_present_map is gone.
Ralf Baechle [Mon, 22 May 2006 13:24:04 +0000 (14:24 +0100)] 
[MIPS] Fix SMP now that fixup_cpu_present_map is gone.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove duplicate declaration of cpu_online_map.
Ralf Baechle [Wed, 17 May 2006 23:16:10 +0000 (01:16 +0200)] 
[MIPS] Remove duplicate declaration of cpu_online_map.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[IRDA]: Missing allocation result check in irlap_change_speed().
Florin Malita [Mon, 5 Jun 2006 22:34:52 +0000 (15:34 -0700)] 
[IRDA]: Missing allocation result check in irlap_change_speed().

The skb allocation may fail, which can result in a NULL pointer dereference
in irlap_queue_xmit().

Coverity CID: 434.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PPPOE]: Missing result check in __pppoe_xmit().
Florin Malita [Mon, 5 Jun 2006 22:34:33 +0000 (15:34 -0700)] 
[PPPOE]: Missing result check in __pppoe_xmit().

skb_clone() may fail, we should check the result.

Coverity CID: 1215.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NET]: Eliminate unused /proc/sys/net/ethernet
Jes Sorensen [Mon, 5 Jun 2006 22:34:11 +0000 (15:34 -0700)] 
[NET]: Eliminate unused /proc/sys/net/ethernet

The /proc/sys/net/ethernet directory has been sitting empty for more than
10 years!  Time to eliminate it!

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETCONSOLE]: Clean up initcall warning.
Matt Mackall [Mon, 5 Jun 2006 22:04:37 +0000 (15:04 -0700)] 
[NETCONSOLE]: Clean up initcall warning.

From: Matt Mackall <mpm@selenic.com>

netconsole is being wrong here.  If it wasn't enabled there's no error.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TCP]: Avoid skb_pull if possible when trimming head
Herbert Xu ~{PmVHI~} [Mon, 5 Jun 2006 22:03:37 +0000 (15:03 -0700)] 
[TCP]: Avoid skb_pull if possible when trimming head

Trimming the head of an skb by calling skb_pull can cause the packet
to become unaligned if the length pulled is odd.  Since the length is
entirely arbitrary for a FIN packet carrying data, this is actually
quite common.

Unaligned data is not the end of the world, but we should avoid it if
it's easily done.  In this case it is trivial.  Since we're discarding
all of the head data it doesn't matter whether we move skb->data forward
or back.

However, it is still possible to have unaligned skb->data in general.
So network drivers should be prepared to handle it instead of crashing.

This patch also adds an unlikely marking on len < headlen since partial
ACKs on head data are extremely rare in the wild.  As the return value
of __pskb_trim_head is no longer ever NULL that has been removed.

Signed-off-by: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>