linux-2.6
19 years ago[PATCH] nice and rt-prio rlimits
Matt Mackall [Sun, 1 May 2005 15:59:00 +0000 (08:59 -0700)] 
[PATCH] nice and rt-prio rlimits

Add a pair of rlimits for allowing non-root tasks to raise nice and rt
priorities. Defaults to traditional behavior. Originally written by
Chris Wright.

The patch implements a simple rlimit ceiling for the RT (and nice) priorities
a task can set.  The rlimit defaults to 0, meaning no change in behavior by
default.  A value of 50 means RT priority levels 1-50 are allowed.  A value of
100 means all 99 privilege levels from 1 to 99 are allowed.  CAP_SYS_NICE is
blanket permission.

(akpm: see http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.1/1921.html for
tips on integrating this with PAM).

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: cio documentation
Cornelia Huck [Sun, 1 May 2005 15:59:00 +0000 (08:59 -0700)] 
[PATCH] s390: cio documentation

Synchronize documentation with current interface.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: remove ioctl32 from crypto driver
Cornelia Huck [Sun, 1 May 2005 15:59:00 +0000 (08:59 -0700)] 
[PATCH] s390: remove ioctl32 from crypto driver

The ioctl32_conversion routines will be deprecated: Remove them from the
crypto driver.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: remove ioctl32 from dasdcmb
Cornelia Huck [Sun, 1 May 2005 15:58:59 +0000 (08:58 -0700)] 
[PATCH] s390: remove ioctl32 from dasdcmb

The ioctl32_conversion routines will be deprecated: Remove them from dasd_cmb
and handle the three cmb ioctls like all other dasd ioctls.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: don't pad cdl blocks for write requests
Horst Hummel [Sun, 1 May 2005 15:58:59 +0000 (08:58 -0700)] 
[PATCH] s390: don't pad cdl blocks for write requests

The first blocks on a cdl formatted dasd device are smaller than the blocksize
of the device.  Read requests are padded with a 'e5' pattern.  Write requests
should not pad the (user) buffer with 'e5' because a write request is not
allowed to modify the buffer.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: enable write barriers in the dasd driver
Stefan Weinhuber [Sun, 1 May 2005 15:58:59 +0000 (08:58 -0700)] 
[PATCH] s390: enable write barriers in the dasd driver

The DASD device driver never reorders the I/O requests and relies on the
hardware to write all data to nonvolatile storage before signaling a
successful write.  Hence, the only thing we have to do to support write
barriers is to set the queue ordered flag.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: dasd readonly attribute
Horst Hummel [Sun, 1 May 2005 15:58:59 +0000 (08:58 -0700)] 
[PATCH] s390: dasd readonly attribute

The independent read-only flags in devmap, dasd_device and gendisk are not
kept in sync.  Use one bit per feature in the dasd driver and keep that bit in
sync with the gendisk bit.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: allow longer debug feature names
Michael Holzheu [Sun, 1 May 2005 15:58:58 +0000 (08:58 -0700)] 
[PATCH] s390: allow longer debug feature names

The current limitation of 16 characters of the debug feature names turned out
to be insufficient.  Increase it to 64 characters.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: cmm guest sender id
Martin Schwidefsky [Sun, 1 May 2005 15:58:58 +0000 (08:58 -0700)] 
[PATCH] s390: cmm guest sender id

An arbitrary guest must not be allowed to trigger cmm actions.  Only one
specific guest namely the one that serves as the resource monitor may send cmm
messages.  Add a parameter that allows to specify the guest that may send
messages.  z/VMs resource manager has the name 'VMRMSVM' which is the default.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: default storage key
Peter Oberparleiter [Sun, 1 May 2005 15:58:58 +0000 (08:58 -0700)] 
[PATCH] s390: default storage key

Provide an easy way to define a non-zero storage key at compile time.  This is
useful for debugging purposes.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: fix memory holes and cleanup setup_arch
Heiko Carstens [Sun, 1 May 2005 15:58:57 +0000 (08:58 -0700)] 
[PATCH] s390: fix memory holes and cleanup setup_arch

The memory setup didn't take care of memory holes and this makes the memory
management think there would be more memory available than there is in
reality.  That causes the OOM killer to kill processes even if there is enough
memory left that can be written to the swap space.

The patch fixes this by using free_area_init_node with an array of memory
holes instead of free_area_init.  Further the patch cleans up the code in
setup.c by splitting setup_arch into smaller pieces.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: idle timer setup
Martin Schwidefsky [Sun, 1 May 2005 15:58:57 +0000 (08:58 -0700)] 
[PATCH] s390: idle timer setup

Fix overflow in calculation of the new tod value in stop_hz_timer and fix
wrong virtual timer list idle time in case the virtual timer is already
expired in stop_cpu_timer.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: regenerate defconfig
Martin Schwidefsky [Sun, 1 May 2005 15:58:57 +0000 (08:58 -0700)] 
[PATCH] s390: regenerate defconfig

Regenerate the default configuration for s390.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml ubd: handle readonly status
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:57 +0000 (08:58 -0700)] 
[PATCH] uml ubd: handle readonly status

Use the set_disk_ro() API when the backing file is read-only, to mark the disk
read-only, during the ->open().  The current hack does not work when doing a
mount -o remount.

Also, mark explicitly the code paths which should no more be triggerable (I've
removed the WARN_ON(1) things).  They should actually become BUG()s probably
but I'll avoid that since I'm not so sure the change works so well.  I gave it
only some limited testing.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: commentary about forking flag
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:56 +0000 (08:58 -0700)] 
[PATCH] uml: commentary about forking flag

Add some commentary about UML internals, for a strange trick.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml - hostfs: avoid buffers
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:56 +0000 (08:58 -0700)] 
[PATCH] uml - hostfs: avoid buffers

Use this:
.set_page_dirty = __set_page_dirty_nobuffers,

We already dropped the inclusion of <linux/buffer_head.h>, and we don't have a
backing block device for this FS.

"Without having looked at it, I'm sure that hostfs does not use buffer_heads.
So setting your ->set_page_dirty a_op to point at __set_page_dirty_nobuffers()
is a reasonable thing to do - it'll provide a slight speedup."

This speedup is one less spinlock held and one less conditional branch, which
isn't bad.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: redo console locking
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:56 +0000 (08:58 -0700)] 
[PATCH] uml: redo console locking

Fix some console locking problems (including scheduling in atomic) and various
reorderings and cleanup in that code.  Not yet ready for 2.6.12 probably.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix syscall table by including $(SUBARCH)'s one, for x86-64
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:55 +0000 (08:58 -0700)] 
[PATCH] uml: fix syscall table by including $(SUBARCH)'s one, for x86-64

Reuse asm-x86-64/unistd.h to build our syscall table, like x86-64 already
does.

Like for i386, we must add some #defines for all the (right!) changes UML does
to x86-64 syscall table.

Note: I noted a bogus:
[ __NR_sched_yield ] = (syscall_handler_t *) yield,

while doing this patch (which could only be a workaround for some strange bug,
but I would ignore this possibility).  I'm changing this without notice.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: quick fix syscall table for x86_64
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:55 +0000 (08:58 -0700)] 
[PATCH] uml: quick fix syscall table for x86_64

Fix the moved syscall table for the x86_64 SUBARCH:

- redirect __NR_chown and such to versions aware of 32-bit UIDs,

- avoid the useless hack for sys_nfsservctl,

- use sys_sendfile64 in the table rather than sys_sendfile.

- __NR_uselib is sys_ni_syscall on x86_64 (which does not support A.OUT).

- __NR_getrlimit is sys_getrlimit, not sys_old_getrlimit

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix syscall table by including $(SUBARCH)'s one, for i386
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:55 +0000 (08:58 -0700)] 
[PATCH] uml: fix syscall table by including $(SUBARCH)'s one, for i386

Split the i386 entry.S files into entry.S and syscall_table.S which is
included in the previous one (so actually there is no difference between them)
and use the syscall_table.S in the UML build, instead of tracking by hand the
syscall table changes (which is inherently error-prone).

We must only insert the right #defines to inject the changes we need from the
i386 syscall table (for instance some different function names); also, we
don't implement some i386 syscalls, as ioperm(), nor some TLS-related ones
(yet to provide).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: move va_copy conditional def
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:54 +0000 (08:58 -0700)] 
[PATCH] uml: move va_copy conditional def

GCC 2.95 uses __va_copy instead of va_copy.  Handle it inside compiler.h
instead of in a casual file, and avoid the risk that this breaks with a newer
compiler (which it could do).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: inline empty proc
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:54 +0000 (08:58 -0700)] 
[PATCH] uml: inline empty proc

Cleanup: make an inline of this empty proc.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: support AES i586 crypto driver
Paolo 'Blaisorblade' Giarrusso [Sun, 1 May 2005 15:58:54 +0000 (08:58 -0700)] 
[PATCH] uml: support AES i586 crypto driver

We want to make possible, for the user, to enable the i586 AES implementation.
This requires a restructure.

- Add a CONFIG_UML_X86 to notify that we are building a UML for i386.

- Rename CONFIG_64_BIT to CONFIG_64BIT as is used for all other archs

- Tell crypto/Kconfig that UML_X86 is as good as X86

- Tell it that it must exclude not X86_64 but 64BIT, which will give the
  same results.

- Tell kbuild to descend down into arch/i386/crypto/ to build what's needed.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: workaround old problematic sed behaviour
Rob Landley [Sun, 1 May 2005 15:58:54 +0000 (08:58 -0700)] 
[PATCH] uml: workaround old problematic sed behaviour

Old versions of sed from 1998 (predating the first release of gcc 2.95, but
still in use by debian stable) don't understand the single-line version of the
sed append command.  Since newer versions of sed still understand the...
ahem, "vintage" form of the command, change our code to use that.

Signed-off-by: Rob Landley <rob@landley.net>
Acked-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix handling of no fpx_regs
Andree Leidenfrost [Sun, 1 May 2005 15:58:53 +0000 (08:58 -0700)] 
[PATCH] uml: fix handling of no fpx_regs

      Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

Fix the error path, which is triggered when the processor misses the fpx
regs (i.e.  the "fxsr" cpuinfo feature).  For instance by VIA C3 Samuel2.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: add nfsd syscall when nfsd is modular
blaisorblade@yahoo.it [Sun, 1 May 2005 15:58:53 +0000 (08:58 -0700)] 
[PATCH] uml: add nfsd syscall when nfsd is modular

This trick is useless, because sys_ni.c will handle this problem by itself,
like it does even on UML for other syscalls.

Also, it does not provide the NFSD syscall when NFSD is compiled as a
module, which is a big problem.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix oops related to exception table
Jeff Dike [Sun, 1 May 2005 15:58:53 +0000 (08:58 -0700)] 
[PATCH] uml: fix oops related to exception table

      Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

Prevent the kernel from oopsing during the extable sorting, as it can do
now, because the extable is in the readonly section of the binary.

Jeff says: The exception table turned RO in 2.6.11-rc3-mm1 for some reason.
Moving it causes it to land in the writable data section of the binary.

Paolo says: This patch fixes a oops on startup, which can be easily
triggered by compiling with CONFIG_MODE_TT disabled, and STATIC_LINK either
disabled or enabled.  The resulting kernel will always Oops on startup,
after printing this simple output:

I've verified, by binary search on the BitKeeper repository (synced up as
of 2.6.12-rc2), starting from the range 2.6.11-2.6.12-rc1, that this bug
shows up on BitKeeper revisions in the range [@1.1994.11.168,+inf), i.e.
starting from this:

[PATCH] lib/sort: Replace insertion sort in exception tables

Since UML does not use the exception table, it's likely that insertion sort
didn't happen to write anything on the table.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] hp100: fix card names
Pavel Machek [Sun, 1 May 2005 15:58:52 +0000 (08:58 -0700)] 
[PATCH] hp100: fix card names

Those cards really need A in their names. Otherwise it is pretty hard
to find anything about them on the net.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64: saved_command_line overflow fix
Alexander Nyberg [Sun, 1 May 2005 15:58:52 +0000 (08:58 -0700)] 
[PATCH] x86_64: saved_command_line overflow fix

This strcpy can run off the end of saved_command_line, and we don't need it any more anyway.

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Handle empty E820 regions correctly
Venkatesh Pallipadi [Sun, 1 May 2005 15:58:52 +0000 (08:58 -0700)] 
[PATCH] x86-64: Handle empty E820 regions correctly

Brings sanitize_e820_map() in x86-64 in sync with that of i386.

x86_64 version was missing the changes from this patch.
http://linux.bkbits.net:8080/linux-2.6/cset@3e5e4083Y3HevldZl5KCy94V4DcZww?nav=index.html|src/|src/arch|src/arch/i386|src/arch/i386/kernel|related/arch/i386/kernel/setup.c

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Linux 2.6.x VM86 interrupt emulation fixes
Pavel Pisa [Sun, 1 May 2005 15:58:52 +0000 (08:58 -0700)] 
[PATCH] Linux 2.6.x VM86 interrupt emulation fixes

Patch solves VM86 interrupt emulation deadlock on SMP systems.  The VM86
interrupt emulation has been heavily tested and works well on UP systems
after last update, but it seems to deadlock when we have used it on SMP/HT
boxes now.

It seems, that disable_irq() cannot be called from interrupts, because it
waits until disabled interrupt handler finishes
(/kernel/irq/manage.c:synchronize_irq():while(IRQ_INPROGRESS);).  This
blocks one CPU after another.  Solved by use disable_irq_nosync.

There is the second problem.  If IRQ source is fast, it is possible, that
interrupt is sometimes processed and re-enabled by the second CPU, before
it is disabled by the first one, but negative IRQ disable depths are not
allowed.  The spinlocking and disabling IRQs over call to
disable_irq_nosync/enable_irq is the only solution found reliable till now.

Signed-off-by: Michal Sojka <sojkam1@control.felk.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Increase number of e820 entries hard limit from 32 to 128
Venkatesh Pallipadi [Sun, 1 May 2005 15:58:51 +0000 (08:58 -0700)] 
[PATCH] Increase number of e820 entries hard limit from 32 to 128

The specifications that talk about E820 map doesn't have an upper limit on
the number of e820 entries.  But, today's kernel has a hard limit of 32.
With increase in memory size, we are seeing the number of E820 entries
reaching close to 32.  Patch below bumps the number upto 128.

The patch changes the location of EDDBUF in zero-page (as it comes after E820).
As, EDDBUF is not used by boot loaders, this patch should not have any effect
on bootloader-setup code interface.

Patch covers both i386 and x86-64.

Tested on:
* grub booting bzImage
* lilo booting bzImage with EDID info enabled
* pxeboot of bzImage

Side-effect:
bss increases by ~ 2K and init.data increases by ~7.5K
on all systems, due to increase in size of static arrays.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64: interrupt handling fix
Andi Kleen [Sun, 1 May 2005 15:58:51 +0000 (08:58 -0700)] 
[PATCH] x86_64: interrupt handling fix

- Initialize workmask correctly on interrupt signal handling

- Readd missing cli's in the interrupt return path.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] cpuid x87 bit on AMD falsely marked as PNI
Zwane Mwaikambo [Sun, 1 May 2005 15:58:51 +0000 (08:58 -0700)] 
[PATCH] cpuid x87 bit on AMD falsely marked as PNI

http://bugme.osdl.org/show_bug.cgi?id=4426

vendor_id       : AuthenticAMD
cpu family      : 6
model           : 10
model name      : AMD Athlon(tm) XP
stepping        : 0
cpu MHz         : 2204.807
<snipped>
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse pni syscall mmxext 3dnowext 3dnow
bogomips        : 4358.14

We're marking bit 0 of extended function 0x80000001 cpuid as PNI support on
AMD processors, when it actually denotes x87 FPU present.  Patch for i386
and x86_64 below.

Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] hda_intel: Intel ESB2 support
Jason Gaston [Sun, 1 May 2005 15:58:50 +0000 (08:58 -0700)] 
[PATCH] hda_intel: Intel ESB2 support

This adds the Intel ESB2 HD Audio DID to the hda_intel.c audio driver.

Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] irq and pci_ids for Intel ICH7DH & ICH7-M DH
Jason Gaston [Sun, 1 May 2005 15:58:50 +0000 (08:58 -0700)] 
[PATCH] irq and pci_ids for Intel ICH7DH & ICH7-M DH

This patch adds the Intel ICH7DH and ICH7-M DH DID's to the irq.c and
pci_ids.h files.

Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i386: fix hpet for systems that don't support legacy replacement
john stultz [Sun, 1 May 2005 15:58:50 +0000 (08:58 -0700)] 
[PATCH] i386: fix hpet for systems that don't support legacy replacement

Currently the i386 HPET code assumes the entire HPET implementation from
the spec is present.  This breaks on boxes that do not implement the
optional legacy timer replacement functionality portion of the spec.

This patch, which is very similar to my x86-64 patch for the same issue,
fixes the problem allowing i386 systems that cannot use the HPET for the
timer interrupt and RTC to still use the HPET as a time source.  I've
tested this patch on a system systems without HPET, with HPET but without
legacy timer replacement, as well as HPET with legacy timer replacement.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] CPUID bug and inconsistency fix
H. Peter Anvin [Sun, 1 May 2005 15:58:49 +0000 (08:58 -0700)] 
[PATCH] CPUID bug and inconsistency fix

The recent support for K8 multicore was misported from x86-64 to i386, due
to an unnecessary inconsistency between the CPUID code.  Sure, there is are
no x86-64 VIA chips yet, but it should happen eventually.

This patch fixes the i386 bug as well as makes x86-64 match i386 in the
handing of the CPUID array.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Enable write combining for server works LE rev > 6
Lee Revell [Sun, 1 May 2005 15:58:49 +0000 (08:58 -0700)] 
[PATCH] Enable write combining for server works LE rev > 6

Enable write combining for server works LE rev > 6 per
http://www.ussg.iu.edu/hypermail/linux/kernel/0104.3/1007.html

Signed-Off-By: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86: entry.S trap return fixes
Stas Sergeev [Sun, 1 May 2005 15:58:49 +0000 (08:58 -0700)] 
[PATCH] x86: entry.S trap return fixes

do_debug() and do_int3() return void.

This patch fixes the CONFIG_KPROBES variant of do_int3() to return void too
and adjusts entry.S accordingly.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86 reboot: Add reboot fixup for gx1/cs5530a
Jaya Kumar [Sun, 1 May 2005 15:58:49 +0000 (08:58 -0700)] 
[PATCH] x86 reboot: Add reboot fixup for gx1/cs5530a

This patch by Jaya Kumar introduces a generic infrastructure to deal with
x86 chipsets with nonstandard reset sequences, and adds support for the
Geode gx1/cs5530a chipset.

Signed-off-by: Jaya Kumar <jayalk@intworks.biz>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] check nmi watchdog is broken
Jack F Vogel [Sun, 1 May 2005 15:58:48 +0000 (08:58 -0700)] 
[PATCH] check nmi watchdog is broken

A bug against an xSeries system showed up recently noting that the
check_nmi_watchdog() test was failing.

I have been investigating it and discovered in both i386 and x86_64 the
recent change to the routine to use the cpu_callin_map has uncovered a
problem.  Prior to that change, on an SMP box, the test was trivally
passing because all cpu's were found to not yet be online, but now with the
callin_map they are discovered, it goes on to test the counter and they
have not yet begun to increment, so it announces a CPU is stuck and bails
out.

On all the systems I have access to test, the announcement of failure is
also bougs...  by the time you can login and check /proc/interrupts, the
NMI count is happily incrementing on all CPUs.  Its just that the test is
being done too early.

I have tried moving the call to the test around a bit, and it was always
too early.  I finally hit on this proposed solution, it delays the routine
via a late_initcall(), seems like the right solution to me.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i386/x86_64 segment register access update
H. J. Lu [Sun, 1 May 2005 15:58:48 +0000 (08:58 -0700)] 
[PATCH] i386/x86_64 segment register access update

The new i386/x86_64 assemblers no longer accept instructions for moving
between a segment register and a 32bit memory location, i.e.,

        movl (%eax),%ds
        movl %ds,(%eax)

To generate instructions for moving between a segment register and a
16bit memory location without the 16bit operand size prefix, 0x66,

        mov (%eax),%ds
        mov %ds,(%eax)

should be used. It will work with both new and old assemblers. The
assembler starting from 2.16.90.0.1 will also support

        movw (%eax),%ds
        movw %ds,(%eax)

without the 0x66 prefix. I am enclosing patches for 2.4 and 2.6 kernels
here. The resulting kernel binaries should be unchanged as before, with
old and new assemblers, if gcc never generates memory access for

               unsigned gsindex;
               asm volatile("movl %%gs,%0" : "=g" (gsindex));

If gcc does generate memory access for the code above, the upper bits
in gsindex are undefined and the new assembler doesn't allow it.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] fix i386 memcpy
Denis Vlasenko [Sun, 1 May 2005 15:58:48 +0000 (08:58 -0700)] 
[PATCH] fix i386 memcpy

This patch shortens non-constant memcpy() by two bytes and fixes spurious
out-of-line constant memcpy().

# size vmlinux.org vmlinux
   text    data     bss     dec     hex filename
3954591 1553426  236544 5744561  57a7b1 vmlinux.org
3952615 1553426  236544 5742585  579ff9 vmlinux

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: reverse prediction on spinlock busy loop code
Jake Moilanen [Sun, 1 May 2005 15:58:47 +0000 (08:58 -0700)] 
[PATCH] ppc64: reverse prediction on spinlock busy loop code

On our raw spinlocks, we currently have an attempt at the lock, and if we do
not get it we enter a spin loop.  This spinloop will likely continue for
awhile, and we pridict likely.

Shouldn't we predict that we will get out of the loop so our next instructions
are already prefetched.  Even when we miss because the lock is still held, it
won't matter since we are waiting anyways.

I did a couple quick benchmarks, but the results are inconclusive.

16-way 690 running specjbb with original code
# ./specjbb 3000 16 1 1 19 30 120
    ...
Valid run, Score is 59282

16-way 690 running specjbb with unlikely code
# ./specjbb 3000 16 1 1 19 30 120
    ...
Valid run, Score is 59541

I saw a smaller increase on a JS20 (~1.6%)

JS20 specjbb w/ original code
# ./specjbb 400 2 1 1 19 30 120
   ...
Valid run, Score is 20460

JS20 specjbb w/ unlikely code
# ./specjbb 400 2 1 1 19 30 120
   ...
Valid run, Score is 20803

Anton said:

Mispredicting the spinlock busy loop also means we slow down the rate at which
we do the loads which can be good for heavily contended locks.

Note: There are some gcc issues with our default build and branch prediction,
but a CONFIG_POWER4_ONLY build should emit them correctly.  I'm working with
Alan Modra on it now.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] use smp_mb/wmb/rmb where possible
akpm@osdl.org [Sun, 1 May 2005 15:58:47 +0000 (08:58 -0700)] 
[PATCH] use smp_mb/wmb/rmb where possible

Replace a number of memory barriers with smp_ variants.  This means we won't
take the unnecessary hit on UP machines.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: use smp_mb and smp_wmb
Anton Blanchard [Sun, 1 May 2005 15:58:47 +0000 (08:58 -0700)] 
[PATCH] ppc64: use smp_mb and smp_wmb

Use smp_mb and smp_wmb. In particular smp_wmb is lighter weight than wmb.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: enforce medium thread priority in hypervisor calls
Anton Blanchard [Sun, 1 May 2005 15:58:46 +0000 (08:58 -0700)] 
[PATCH] ppc64: enforce medium thread priority in hypervisor calls

Calls into the hypervisor do not raise the thread priority.  Ensure we are
running at medium priority upon entry to the hypervisor.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: firmware workaround
Anton Blanchard [Sun, 1 May 2005 15:58:46 +0000 (08:58 -0700)] 
[PATCH] ppc64: firmware workaround

Recent gcc 4.0 testing uncovered a firmware issue.  Some properties are larger
than 31 bytes and due to gcc 4.0s better stack allocation this overflow ran
over non volatile register storage.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: remove unnecessary include
Anton Blanchard [Sun, 1 May 2005 15:58:46 +0000 (08:58 -0700)] 
[PATCH] ppc64: remove unnecessary include

We no longer use any ppcdebug stuff in a.out.h, so remove the define.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: noexec fixes
Anton Blanchard [Sun, 1 May 2005 15:58:45 +0000 (08:58 -0700)] 
[PATCH] ppc64: noexec fixes

There were a few issues with the ppc64 noexec support:

The 64bit ABI has a non executable stack by default.  At the moment 64bit apps
require a PT_GNU_STACK section in order to have a non executable stack.

Disable the read implies exec workaround on the 64bit ABI.  The 64bit
toolchain has never had problems with incorrect mmap permissions (the 32bit
has, thats why we need to retain the workaround).

With these fixes as well as a gcc fix from Alan Modra (that was recently
committed) 64bit apps work as expected.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] PPC64: Remove hot busy-wait loop in __hash_page
Olof Johansson [Sun, 1 May 2005 15:58:45 +0000 (08:58 -0700)] 
[PATCH] PPC64: Remove hot busy-wait loop in __hash_page

It turns out that our current __hash_page code will do a very hot busy-wait
loop waiting on _PAGE_BUSY to be cleared.  It even does ldarx/stdcx in the
loop, which will bounce reservations around like crazy if there's more than
one CPU spinning on the same PTE (or even another PTE in the same
reservation granule).  The end result is that each fault takes longer when
there's contention, which in turn increases the chance of another thread
hitting the same fault and also piling up.  Not pretty.

There's two options here:
1. Do an out-of-line busy loop a'la spinlocks with just loads (no
   reserves)
2. Just bail and refault if needed.

(2) makes sense here: If the PTE is busy, chances are it's in flux anyway
and the other code path making a change might just be ready to hash it.

This fixes a stampede seen on a large-ish system where a multithreaded
HPC app faults in the same text pages on several cpus at the same time.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: tell firmware about kernel capabilities
Paul Mackerras [Sun, 1 May 2005 15:58:45 +0000 (08:58 -0700)] 
[PATCH] ppc64: tell firmware about kernel capabilities

On pSeries systems, according to the platform architecture specs, we are
supposed to be supplying a structure to firmware that tells firmware about
our capabilities, such as which version of the data structures that
describe available memory we are expecting to see.  The way we end up
having to supply this data structure is a bit gross, since it was designed
for AIX and doesn't suit us very well.  This patch adds the code to supply
this data structure to the firmware.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: update to use the new 4L headers
Benjamin Herrenschmidt [Sun, 1 May 2005 15:58:44 +0000 (08:58 -0700)] 
[PATCH] ppc64: update to use the new 4L headers

This patch converts ppc64 to use the generic pgtable-nopud.h instead of the
"fixup" header.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: nvram cleanups
akpm@osdl.org [Sun, 1 May 2005 15:58:44 +0000 (08:58 -0700)] 
[PATCH] ppc64: nvram cleanups

- Fix

  arch/ppc64/kernel/nvram.c:342: warning: `part' might be used uninitialized in this function

- Various codingstyle tweaks.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Fix irq parsing on powermac
Paul Mackerras [Sun, 1 May 2005 15:58:44 +0000 (08:58 -0700)] 
[PATCH] ppc64: Fix irq parsing on powermac

When I tried Ben's patches to the powermac sound driver on my G5, I found
that it was taking enormous numbers of sound DMA transmit interrupts.  This
turned out to be because it was incorrectly configured as level-sensitive
instead of edge-sensitive, which in turn was because the code that parses
the interrupt tree that Open Firmware gives us was incorrectly assigning
another device the same irq number as the sound DMA transmit interrupt
(i.e.  1).

This patch fixes the problem, in a somewhat quick and dirty way for now,
but one which will work for all the machines we currently run on.
Ultimately Ben and I want to do something more general and robust, but this
should go in for 2.6.12.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: remove unused argument to create_slbe
Olof Johansson [Sun, 1 May 2005 15:58:44 +0000 (08:58 -0700)] 
[PATCH] ppc64: remove unused argument to create_slbe

Remove vsid argument to create_slbe, since it's no longer used.

Spotted by R Sharada.

Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: add PT_NOTE section to vDSO
Benjamin Herrenschmidt [Sun, 1 May 2005 15:58:43 +0000 (08:58 -0700)] 
[PATCH] ppc64: add PT_NOTE section to vDSO

This patch from Roland adds a PT_NOTE section to both 32 and 64 bits vDSOs
to expose the kernel version to glibc, thus avoiding a uname syscall on
every launch.  This is equivalent to the patches Roland posted already for
x86 and x86-64.

Note: the 64 bits .note is actually using the 32 bits format.  This is
normal.  The ELF spec specifies a different format for 64 bits .note, but
for some reason, this was never properly implemented, the core dumps for
example are all using 32 bits format .note, and binutils cannot even read a
64 bits format .note.  Talking to our toolchain folks, they think we'd
rather stick to 32 bits format .note everywhere and get the spec fixed some
day ...

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] pmac: save master volume on sleep
Colin Leroy [Sun, 1 May 2005 15:58:43 +0000 (08:58 -0700)] 
[PATCH] pmac: save master volume on sleep

Ben's patch that shutdowns master switch and restores it after resume
("pmac: Improve sleep code of tumbler driver") isn't enough here on an
iBook (snapper chip).

The master switch is correctly saved and restored, but somehow
tumbler_put_master_volume() gets called just after
tumbler_set_master_volume() and sets mix->master_vol[*] to 0.  So, on
resuming, the master switch is reenabled, but the volume is set to 0.

Here's a patch that also saves and restores master_vol.

Signed-off-by: Colin Leroy <colin@colino.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: add sound support for Mac Mini
Benjamin Herrenschmidt [Sun, 1 May 2005 15:58:43 +0000 (08:58 -0700)] 
[PATCH] ppc32: add sound support for Mac Mini

This patch applies on top of my previous g5 related sound patches and adds
support for the Mac Mini to the PowerMac Alsa driver.

However, I haven't found any kind of HW support for volume control on this
machine.  If it exist, it's well hidden.  That means that you probably want
to make sure you use software with the ability to do soft volume control,
or use Alsa 0.9 pre-release with the softvol plugin.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: improve g5 sound headphone mute
Benjamin Herrenschmidt [Sun, 1 May 2005 15:58:43 +0000 (08:58 -0700)] 
[PATCH] ppc64: improve g5 sound headphone mute

This patch fixes a couple more issues with the management of the GPIOs
dealing with headphone and line out mute on the G5.  It should fix the
remaining problems of people not getting any sound out of the headphone
jack.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: workaround for spurious IRQs on PQ2
Dan Malek [Sun, 1 May 2005 15:58:42 +0000 (08:58 -0700)] 
[PATCH] ppc32: workaround for spurious IRQs on PQ2

There is a problem with large amounts of spurious IRQs on PowerPC 82xx
systems.

The problem is corrected by adding sync at the end of cpm2_mask_and_ack.
This may be needed on 8xx as well but has not yet been confirmed.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Dan Malek <dan@embeddedalley.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix address checking on lmw/stmw align exception
Paul Mackerras [Sun, 1 May 2005 15:58:42 +0000 (08:58 -0700)] 
[PATCH] ppc32: Fix address checking on lmw/stmw align exception

The handling of misaligned load/store multiple instructions did not check
to see if the address was ok to access before using __{get,put}_user().

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix a sleep issues on some laptops
Benjamin Herrenschmidt [Sun, 1 May 2005 15:58:42 +0000 (08:58 -0700)] 
[PATCH] ppc32: Fix a sleep issues on some laptops

Some earlier models of aluminium powerbooks and ibook G4s have a clock chip
that requires some tweaking before and after sleep.  It seems that without
that magic incantation to disable and re-enable clock spreading, RAM isn't
properly refreshed during sleep.  This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] macintosh/adbhid.c: adb buttons support for aluminium PowerBook G4
Andreas Jaggi [Sun, 1 May 2005 15:58:41 +0000 (08:58 -0700)] 
[PATCH] macintosh/adbhid.c: adb buttons support for aluminium PowerBook G4

This patch adds support for the special adb buttons of the aluminium
PowerBook G4.

Signed-off-by: Andreas Jaggi <andreas.jaggi@waterwave.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix IDE related crash on wakeup
Benjamin Herrenschmidt [Sun, 1 May 2005 15:58:41 +0000 (08:58 -0700)] 
[PATCH] ppc32: Fix IDE related crash on wakeup

I noticed an occasional crash on wakeup from sleep on my powerbook
(strangly never happened before, probably timing related) that appears to
be due to a dangling interrupt while the chip is put to sleep and beeing
reset on wakeup.

This patch fixes is by disabling the irq in the ide pmac driver while
asleep and only re-enable it after the chip has been fully reset.  This is
safe to do so as the interrupt of these apple IDE cells is never shared.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: add rtc hooks in PPC7D platform file
Chris Elston [Sun, 1 May 2005 15:58:41 +0000 (08:58 -0700)] 
[PATCH] ppc32: add rtc hooks in PPC7D platform file

This patch adds the hooks into the PPC7D platforms file to support the DS1337
RTC device as the clock device for the PPC7D board.

Signed-off-by: Chris Elston <chris.elston@radstone.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: fix for misreported SDRAM size on Radstone PPC7D platform
Chris Elston [Sun, 1 May 2005 15:58:40 +0000 (08:58 -0700)] 
[PATCH] ppc32: fix for misreported SDRAM size on Radstone PPC7D platform

This patch fixes the SDRAM output from /proc/cpuinfo.  The previous code
assumed that there was only one bank of SDRAM, and that the size in the memory
configuration register was the total size.

Signed-off-by: Chris Elston <chris.elston@radstone.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: refactor FPU exception handling
Paul Mackerras [Sun, 1 May 2005 15:58:40 +0000 (08:58 -0700)] 
[PATCH] ppc32: refactor FPU exception handling

Moved common FPU exception handling code out of head.S so it can be used by
several of the sub-architectures that might of a full PowerPC FPU.

Also, uses new CONFIG_PPC_FPU define to fix alignment exception handling
for floating point load/store instructions to only occur if we have a
hardware FPU.

Signed-off-by: Jason McMullan <jason.mcmullan@timesys.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix errata for some G3 CPUs
Benjamin Herrenschmidt [Sun, 1 May 2005 15:58:40 +0000 (08:58 -0700)] 
[PATCH] ppc32: Fix errata for some G3 CPUs

Some G3 CPUs can crash in funny way if a store from an FPU register
instruction is executed on a register that has never been initialized since
power on.  This patch fixes it by making sure all FP registers have been
properly initialized at kernel boot and when waking from sleep.  It also makes
the code that decides wether HID0_BTIC and HID0_DPM are allowed on a given CPU
smarter (it can actually _clear_ them now if they are not allowed instead of
just setting them when they are allowed in case the firmware got them wrong)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] SELinux: add finer grained permissions to Netlink audit processing
James Morris [Sun, 1 May 2005 15:58:40 +0000 (08:58 -0700)] 
[PATCH] SELinux: add finer grained permissions to Netlink audit processing

This patch provides finer grained permissions for the audit family of
Netlink sockets under SELinux.

1.  We need a way to differentiate between privileged and unprivileged
   reads of kernel data maintained by the audit subsystem.  The AUDIT_GET
   operation is unprivileged: it returns the current status of the audit
   subsystem (e.g.  whether it's enabled etc.).  The AUDIT_LIST operation
   however returns a list of the current audit ruleset, which is considered
   privileged by the audit folk.  To deal with this, a new SELinux
   permission has been implemented and applied to the operation:
   nlmsg_readpriv, which can be allocated to appropriately privileged
   domains.  Unprivileged domains would only be allocated nlmsg_read.

2.  There is a requirement for certain domains to generate audit events
   from userspace.  These events need to be collected by the kernel,
   collated and transmitted sequentially back to the audit daemon.  An
   example is user level login, an auditable event under CAPP, where
   login-related domains generate AUDIT_USER messages via PAM which are
   relayed back to auditd via the kernel.  To prevent handing out
   nlmsg_write permissions to such domains, a new permission has been
   added, nlmsg_relay, which is intended for this type of purpose: data is
   passed via the kernel back to userspace but no privileged information is
   written to the kernel.

Also, AUDIT_LOGIN messages are now valid only for kernel->user messaging,
so this value has been removed from the SELinux nlmsgtab (which is only
used to check user->kernel messages).

Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] SELinux: cleanup ipc_has_perm
Stephen Smalley [Sun, 1 May 2005 15:58:39 +0000 (08:58 -0700)] 
[PATCH] SELinux: cleanup ipc_has_perm

This patch removes the sclass argument from ipc_has_perm in the SELinux
module, as it can be obtained from the ipc security structure.  The use of
a separate argument was a legacy of the older precondition function
handling in SELinux and is obsolete.  Please apply.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] drop_buffers() oops fix
akpm@osdl.org [Sun, 1 May 2005 15:58:39 +0000 (08:58 -0700)] 
[PATCH] drop_buffers() oops fix

In rare situations, drop_buffers() can be called for a page which has buffers,
but no ->mapping (it was truncated, but the buffers were left behind because
ext3 was still fiddling with them).

But if there was an I/O error in a buffer_head, drop_buffers() will try to get
at the address_space and will oops.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mpage_writepages() page locking fix
Nikita Danilov [Sun, 1 May 2005 15:58:39 +0000 (08:58 -0700)] 
[PATCH] mpage_writepages() page locking fix

When ->writepage() returns WRITEPAGE_ACTIVATE, the page is still locked.
Explicitly unlock the page in mpage_writepages().

Signed-off-by: Nikita Danilov <nikita@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] add kmalloc_node, inline cleanup
Manfred Spraul [Sun, 1 May 2005 15:58:38 +0000 (08:58 -0700)] 
[PATCH] add kmalloc_node, inline cleanup

The patch makes the following function calls available to allocate memory
on a specific node without changing the basic operation of the slab
allocator:

 kmem_cache_alloc_node(kmem_cache_t *cachep, unsigned int flags, int node);
 kmalloc_node(size_t size, unsigned int flags, int node);

in a similar way to the existing node-blind functions:

 kmem_cache_alloc(kmem_cache_t *cachep, unsigned int flags);
 kmalloc(size, flags);

kmem_cache_alloc_node was changed to pass flags and the node information
through the existing layers of the slab allocator (which lead to some minor
rearrangements).  The functions at the lowest layer (kmem_getpages,
cache_grow) are already node aware.  Also __alloc_percpu can call
kmalloc_node now.

Performance measurements (using the pageset localization patch) yields:

w/o patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.27  100       484.2736     12.02      1.97   Wed Mar 30 20:50:43 2005
  100    25170.83   91       251.7083     23.12    150.10   Wed Mar 30 20:51:06 2005
  200    34601.66   84       173.0083     33.64    294.14   Wed Mar 30 20:51:40 2005
  300    37154.47   86       123.8482     46.99    436.56   Wed Mar 30 20:52:28 2005
  400    39839.82   80        99.5995     58.43    580.46   Wed Mar 30 20:53:27 2005
  500    40036.32   79        80.0726     72.68    728.60   Wed Mar 30 20:54:40 2005
  600    44074.21   79        73.4570     79.23    872.10   Wed Mar 30 20:55:59 2005
  700    44016.60   78        62.8809     92.56   1015.84   Wed Mar 30 20:57:32 2005
  800    40411.05   80        50.5138    115.22   1161.13   Wed Mar 30 20:59:28 2005
  900    42298.56   79        46.9984    123.83   1303.42   Wed Mar 30 21:01:33 2005
 1000    40955.05   80        40.9551    142.11   1441.92   Wed Mar 30 21:03:55 2005

with pageset localization and slab API patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.19  100       484.1930     12.02      1.98   Wed Mar 30 21:10:18 2005
  100    27428.25   92       274.2825     21.22    149.79   Wed Mar 30 21:10:40 2005
  200    37228.94   86       186.1447     31.27    293.49   Wed Mar 30 21:11:12 2005
  300    41725.42   85       139.0847     41.84    434.10   Wed Mar 30 21:11:54 2005
  400    43032.22   82       107.5805     54.10    582.06   Wed Mar 30 21:12:48 2005
  500    42211.23   83        84.4225     68.94    722.61   Wed Mar 30 21:13:58 2005
  600    40084.49   82        66.8075     87.12    873.11   Wed Mar 30 21:15:25 2005
  700    44169.30   79        63.0990     92.24   1008.77   Wed Mar 30 21:16:58 2005
  800    43097.94   79        53.8724    108.03   1155.88   Wed Mar 30 21:18:47 2005
  900    41846.75   79        46.4964    125.17   1303.38   Wed Mar 30 21:20:52 2005
 1000    40247.85   79        40.2478    144.60   1442.21   Wed Mar 30 21:23:17 2005

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] sync_page() smp_mb() comment
William Lee Irwin III [Sun, 1 May 2005 15:58:38 +0000 (08:58 -0700)] 
[PATCH] sync_page() smp_mb() comment

The smp_mb() is becaus sync_page() doesn't have PG_locked while it accesses
page_mapping(page).  The comments in the patch (the entire patch is the
addition of this comment) try to explain further how and why smp_mb() is
used.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] RLIMIT_MEMLOCK checking fix
Chris Wright [Sun, 1 May 2005 15:58:38 +0000 (08:58 -0700)] 
[PATCH] RLIMIT_MEMLOCK checking fix

Always use page counts when doing RLIMIT_MEMLOCK checking to avoid possible
overflow.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] count bounce buffer pages in vmstat
KAMEZAWA Hiroyuki [Sun, 1 May 2005 15:58:37 +0000 (08:58 -0700)] 
[PATCH] count bounce buffer pages in vmstat

This is a patch for counting the number of pages for bounce buffers.  It's
shown in /proc/vmstat.

Currently, the number of bounce pages are not counted anywhere.  So, if
there are many bounce pages, it seems that there are leaked pages.  And
it's difficult for a user to imagine the usage of bounce pages.  So, it's
meaningful to show # of bouce pages.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] doc: Locking update
Nikita Danilov [Sun, 1 May 2005 15:58:37 +0000 (08:58 -0700)] 
[PATCH] doc: Locking update

Make the Locking document truer.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mm: use __GFP_NOMEMALLOC
Nick Piggin [Sun, 1 May 2005 15:58:37 +0000 (08:58 -0700)] 
[PATCH] mm: use __GFP_NOMEMALLOC

Use the new __GFP_NOMEMALLOC to simplify the previous handling of
PF_MEMALLOC.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mempool: simplify alloc
Nick Piggin [Sun, 1 May 2005 15:58:37 +0000 (08:58 -0700)] 
[PATCH] mempool: simplify alloc

Mempool is pretty clever.  Looks too clever for its own good :) It
shouldn't really know so much about page reclaim internals.

- don't guess about what effective page reclaim might involve.

- don't randomly flush out all dirty data if some unlikely thing
  happens (alloc returns NULL). page reclaim can (sort of :P) handle
  it.

I think the main motivation is trying to avoid pool->lock at all costs.
However the first allocation is attempted with __GFP_WAIT cleared, so it
will be 'can_try_harder' if it hits the page allocator.  So if allocation
still fails, then we can probably afford to hit the pool->lock - and what's
the alternative?  Try page reclaim and hit zone->lru_lock?

A nice upshot is that we don't need to do any fancy memory barriers or do
(intentionally) racy access to pool-> fields outside the lock.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mempool: NOMEMALLOC and NORETRY
Nick Piggin [Sun, 1 May 2005 15:58:36 +0000 (08:58 -0700)] 
[PATCH] mempool: NOMEMALLOC and NORETRY

Mempools have 2 problems.

The first is that mempool_alloc can possibly get stuck in __alloc_pages
when they should opt to fail, and take an element from their reserved pool.

The second is that it will happily eat emergency PF_MEMALLOC reserves
instead of going to their reserved pools.

Fix the first by passing __GFP_NORETRY in the allocation calls in
mempool_alloc.  Fix the second by introducing a __GFP_MEMPOOL flag which
directs the page allocator not to allocate from the reserve pool.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mm: pcp use non powers of 2 for batch size
Nick Piggin [Sun, 1 May 2005 15:58:36 +0000 (08:58 -0700)] 
[PATCH] mm: pcp use non powers of 2 for batch size

Jack Steiner reported this to have fixed his problem (bad colouring):
"The patches fix both problems that I found - bad
 coloring & excessive pages in pagesets."

In most workloads this is not likely to be such a pronounced problem,
however it should help corner cases.  And avoiding powers of 2 in these
types of memory operations is always a good idea.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mm: rmap.c cleanup
Nikita Danilov [Sun, 1 May 2005 15:58:36 +0000 (08:58 -0700)] 
[PATCH] mm: rmap.c cleanup

mm/rmap.c:page_referenced_one() and mm/rmap.c:try_to_unmap_one() contain
identical code that

 - takes mm->page_table_lock;

 - drills through page tables;

 - checks that correct pte is reached.

Coalesce this into page_check_address()

Signed-off-by: Nikita Danilov <nikita@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] RLIMIT_AS checking fix
akpm@osdl.org [Sun, 1 May 2005 15:58:35 +0000 (08:58 -0700)] 
[PATCH] RLIMIT_AS checking fix

Address bug #4508: there's potential for wraparound in the various places
where we perform RLIMIT_AS checking.

(I'm a bit worried about acct_stack_growth().  Are we sure that vma->vm_mm is
always equal to current->mm?  If not, then we're comparing some other
process's total_vm with the calling process's rlimits).

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] generic_file_buffered_write fixes
akpm@osdl.org [Sun, 1 May 2005 15:58:35 +0000 (08:58 -0700)] 
[PATCH] generic_file_buffered_write fixes

Anton Altaparmakov <aia21@cam.ac.uk> points out:

- It calls fault_in_pages_readable() which is completely bogus if @nr_segs >
  1.  It needs to be replaced by a to be written
  "fault_in_pages_readable_iovec()".

- It increments @buf even in the iovec case thus @buf can point to random
  memory really quickly (in the iovec case) and then it calls
  fault_in_pages_readable() on this random memory.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ultrastor build fix
akpm@osdl.org [Sun, 1 May 2005 15:58:35 +0000 (08:58 -0700)] 
[PATCH] ultrastor build fix

Fix a typo.

James Bottomley <James.Bottomley@steeleye.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] kbuild: Set NOSTDINC_FLAGS late to speed up compile (a little)
Sam Ravnborg [Sat, 30 Apr 2005 23:51:42 +0000 (16:51 -0700)] 
[PATCH] kbuild: Set NOSTDINC_FLAGS late to speed up compile (a little)

Move definition of NOSTDINC_FLAGS below inclusion of arch Makefile, so
any arch specific settings to $(CC) takes effect before looking up the
compiler include directory.

The previous solution that replaced ':=' with '=' caused gcc to be
invoked one additional time for each directory visited.

This decreases kernel compile time with 0.1 second (3.6 -> 3.5 seconds) when
running make on a fully built kernel

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] kbuild/ppc: tell when uimage was not built
Sam Ravnborg [Sat, 30 Apr 2005 23:51:42 +0000 (16:51 -0700)] 
[PATCH] kbuild/ppc: tell when uimage was not built

Tom Rini said:
  Note that there is still a trivial'ish change to make.  When mkimage
  doesn't exist on the host we should say "uImage not made" or
  something similar.

So I did like Tom asked.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] kbuild/i386: re-introduce dependency on vmlinux for install target, and add...
Sam Ravnborg [Sat, 30 Apr 2005 23:51:42 +0000 (16:51 -0700)] 
[PATCH] kbuild/i386: re-introduce dependency on vmlinux for install target, and add kernel_install

Removing the dependency on vmlinux for the install target raised a few
complaints, so instead a new target i added: kernel_install.

kernel_install will install the kernel just like the ordinary install target.
The only difference is that install has a dependency on vmlinux,
kernel_install does not. Therefore kernel_install is the best choice
when accessing the kernel over a NFS mount or as another user.

kernel_install is similar to modules_install in the fact that neither does
a full kernel compile before performing the install.
In this way they are good for root use. Also added back the
dependency on vmlinux for the install target so peoples scripts are no
longer broken.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge of master.kernel.org:/home/rmk/linux-2.6-rmk.git
Linus Torvalds [Sat, 30 Apr 2005 22:42:33 +0000 (15:42 -0700)] 
Merge ... kernel.org:/home/rmk/linux-2.6-rmk.git

19 years ago[PATCH] ARM: IntegratorCP: Fix CLCD MUX selection values
Russell King [Sat, 30 Apr 2005 22:32:38 +0000 (23:32 +0100)] 
[PATCH] ARM: IntegratorCP: Fix CLCD MUX selection values

The documentation on these values seems to be rather wrong.
These values have been determined by mere trial and error.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
19 years ago[PATCH] ARM: IntegratorCP: 16bpp is RGB565 not RGB555
Russell King [Sat, 30 Apr 2005 22:28:47 +0000 (23:28 +0100)] 
[PATCH] ARM: IntegratorCP: 16bpp is RGB565 not RGB555

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
19 years ago[PATCH] ARM: AMBA CLCD: program palette for pseudocolor visuals
Russell King [Sat, 30 Apr 2005 21:39:51 +0000 (22:39 +0100)] 
[PATCH] ARM: AMBA CLCD: program palette for pseudocolor visuals

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
19 years agoMerge of master.kernel.org:/home/rmk/linux-2.6-rmk.git
Linus Torvalds [Sat, 30 Apr 2005 20:34:21 +0000 (13:34 -0700)] 
Merge ... kernel.org:/home/rmk/linux-2.6-rmk.git

19 years ago[PATCH] cifs: Update cifs todo list
Steve French [Sat, 30 Apr 2005 18:10:58 +0000 (11:10 -0700)] 
[PATCH] cifs: Update cifs todo list

Signed-off-by: Steve French (sfrench@us.ibm.com)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] cifs: append \* properly on ASCII servers
Steve French [Sat, 30 Apr 2005 18:10:57 +0000 (11:10 -0700)] 
[PATCH] cifs: append \* properly on ASCII servers

For older servers which do not support Unicode

Signed-off-by: Steve French (sfrench@us.ibm.com)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: fix 32-bit signal frame back link
Paul Mackerras [Sat, 30 Apr 2005 17:01:40 +0000 (10:01 -0700)] 
[PATCH] ppc64: fix 32-bit signal frame back link

When the kernel creates a signal frame on the user stack, it puts the
old stack pointer value at the beginning so that the signal frame is
linked into the chain of stack frames like any other frame.
Unfortunately, for 32-bit processes we are writing the old stack
pointer as a 64-bit value rather than a 32-bit value, and the process
sees that as a null pointer, since it only looks at the first 32 bits,
which are zero since ppc is bigendian and the stack pointer is below
4GB.  This bug is in SLES9 and RHEL4 too, hence the ccs.

This patch fixes the bug by making the signal code write the old stack
pointer as a u32 instead of an unsigned long.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ARM: PXA I2C: add platform device
Russell King [Sat, 30 Apr 2005 12:26:06 +0000 (13:26 +0100)] 
[PATCH] ARM: PXA I2C: add platform device

Add the PXA I2C platform device.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
19 years ago[PATCH] ARM: RTC: allow driver methods to return error
Russell King [Sat, 30 Apr 2005 11:19:28 +0000 (12:19 +0100)] 
[PATCH] ARM: RTC: allow driver methods to return error

Allow RTC drivers to return error codes from their read_time
or read_alarm methods.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>