linux-2.6
17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Wed, 7 Mar 2007 01:31:29 +0000 (17:31 -0800)] 
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: release irq during suspend
  sdhci: make isr tolerant of read errors
  mmc: require explicit support for high-speed
  ncpfs: make sure server connection survives a kill

17 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 7 Mar 2007 01:30:59 +0000 (17:30 -0800)] 
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  sis900 warning fixes
  mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data
  pcnet32: Fix PCnet32 performance bug on non-coherent architecutres
  __devinit & __devexit cleanups for de2104x driver
  3c59x: Handle pci_enable_device() failure while resuming
  dmfe: Fix link detection
  dmfe: fix two bugs
  dmfe: trivial/spelling fixes
  revert "drivers/net/tulip/dmfe: support basic carrier detection"
  ucc_geth: returns NETDEV_TX_BUSY when BD ring is full
  ucc_geth: Fix BD processing
  natsemi: netpoll fixes
  bonding: Improve IGMP join processing
  bonding: only receive ARPs for us
  bonding: fix double dev_add_pack

17 years ago[PATCH] kconfig: Update swsusp description
Rafael J. Wysocki [Tue, 6 Mar 2007 09:42:24 +0000 (01:42 -0800)] 
[PATCH] kconfig: Update swsusp description

Update the outdated and inaccurate description of the software suspend in
Kconfig.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] knfsd: provide sunrpc pool_mode module option
Greg Banks [Tue, 6 Mar 2007 09:42:23 +0000 (01:42 -0800)] 
[PATCH] knfsd: provide sunrpc pool_mode module option

Provide a module param "pool_mode" for sunrpc.ko which allows a sysadmin to
choose the mode for mapping NFS thread service pools to CPUs.  Values are:

auto     choose a mapping mode heuristically
global     (default, same as the pre-2.6.19 code) a single global pool
percpu     one pool per CPU
pernode     one pool per NUMA node

Note that since 2.6.19 the hardcoded behaviour has been "auto", this patch
makes the default "global".

The pool mode can be changed after boot/modprobe using /sys, if the NFS and
lockd services have been shut down.  A useful side effect of this change is to
fix a small memory leak when unloading the module.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] knfsd: fix recently introduced problem with shutting down a busy NFS server
NeilBrown [Tue, 6 Mar 2007 09:42:22 +0000 (01:42 -0800)] 
[PATCH] knfsd: fix recently introduced problem with shutting down a busy NFS server

When the last thread of nfsd exits, it shuts down all related sockets.  It
currently uses svc_close_socket to do this, but that only is immediately
effective if the socket is not SK_BUSY.

If the socket is busy - i.e.  if a request has arrived that has not yet been
processes - svc_close_socket is not effective and the shutdown process spins.

So create a new svc_force_close_socket which removes the SK_BUSY flag is set
and then calls svc_close_socket.

Also change some open-codes loops in svc_destroy to use
list_for_each_entry_safe.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] knfsd: remove CONFIG_IPV6 ifdefs from sunrpc server code
NeilBrown [Tue, 6 Mar 2007 09:42:22 +0000 (01:42 -0800)] 
[PATCH] knfsd: remove CONFIG_IPV6 ifdefs from sunrpc server code

They don't really save that much, and aren't worth the hassle.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] knfsd: use recv_msg to get peer address for NFSD instead of code-copying
NeilBrown [Tue, 6 Mar 2007 09:42:21 +0000 (01:42 -0800)] 
[PATCH] knfsd: use recv_msg to get peer address for NFSD instead of code-copying

The sunrpc server code needs to know the source and destination address for
UDP packets so it can reply properly.  It currently copies code out of the
network stack to pick the pieces out of the skb.  This is ugly and causes
compile problems with the IPv6 stuff.

So, rip that out and use recv_msg instead.  This is a much cleaner interface,
but has a slight cost in that the checksum is now checked before the copy, so
we don't benefit from doing both at the same time.  This can probably be
fixed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] uml: comment the initialization of a global
Jeff Dike [Tue, 6 Mar 2007 09:42:20 +0000 (01:42 -0800)] 
[PATCH] uml: comment the initialization of a global

Comment the fact that sig_info is initialized early in boot, and thus doesn't
need any locking.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] uml: add a debugging message
Jeff Dike [Tue, 6 Mar 2007 09:42:19 +0000 (01:42 -0800)] 
[PATCH] uml: add a debugging message

Add a debugging message in the case that mapping a stub fails.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] uml: fix formatting violations in signal delivery code
Jeff Dike [Tue, 6 Mar 2007 09:42:18 +0000 (01:42 -0800)] 
[PATCH] uml: fix formatting violations in signal delivery code

Fix a few formatting bugs in the signal code.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] linux/audit.h needs linux/types.h
Jeff Dike [Tue, 6 Mar 2007 09:42:17 +0000 (01:42 -0800)] 
[PATCH] linux/audit.h needs linux/types.h

Include linux/types.h here because we need a definition of __u32.  This file
appears not be exported verbatim by libc, so I think this doesn't have any
userspace consequences.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] initramfs should not depend on CONFIG_BLOCK
Dimitri Gorokhovik [Tue, 6 Mar 2007 09:42:17 +0000 (01:42 -0800)] 
[PATCH] initramfs should not depend on CONFIG_BLOCK

initramfs ended up depending on BLOCK:

  INITRAMFS_SOURCE <-- BLK_DEV_INITRD <-- BLOCK

This inhibits use of customized-initramfs-over-ramfs without block layer
(ramfs would still be enabled), useful in embedded applications.

Move BLK_DEV_INITRD out of 'drivers/block/Kconfig' and into 'init/Kconfig',
make it unconditional.

Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] cciss: add struct pci_driver shutdown support (replaces reboot notifier)
Mike Miller (OS Dev) [Tue, 6 Mar 2007 09:42:16 +0000 (01:42 -0800)] 
[PATCH] cciss: add struct pci_driver shutdown support (replaces reboot notifier)

This patch adds support for the struct pci_driver shutdown method to cciss.
 We require notification of an impending reboot or shutdown so that we can
flush the battery backed write cache (BBWC) on the Smart Array controller.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] cciss: fix for 2TB support
Mike Miller (OS Dev) [Tue, 6 Mar 2007 09:42:14 +0000 (01:42 -0800)] 
[PATCH] cciss: fix for 2TB support

This patch changes the way we determine if a logical volume is larger than
2TB.

The original test looked for a total_size of 0.  Originally we added 1 to the
total_size.  That would make our read_capacity return size 0 for >2TB lv's.
We assumed that we could not have a lv size of 0 so it seemed OK until we were
in a clustered system.  The backup node would see a size of 0 due to the
reservation on the drive.  That caused the driver to switch to 16-byte CDB's
which are not supported on older controllers.  After that everything was
broken.

It may seem petty but I don't see the value in trying to determine if the LBA
is beyond the 2TB boundary.  That's why when we switch we use 16-byte CDB's
for all read/write operations.  Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Publish rcutorture module parameters via sysfs, read-only
Josh Triplett [Tue, 6 Mar 2007 09:42:13 +0000 (01:42 -0800)] 
[PATCH] Publish rcutorture module parameters via sysfs, read-only

rcutorture's module parameters currently use permissions of 0, so they
don't show up in /sys/module/rcutorture/parameters.  Change the permissions
on all module parameters to world-readable (0444).

rcutorture does all of its initialization and thread startup when loaded
and relies on the parameters not changing during execution, so they should
not permit writing.  However, reading seems fine.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] geode-aes: use unsigned long for spin_lock_irqsave
Alexey Dobriyan [Tue, 6 Mar 2007 09:42:13 +0000 (01:42 -0800)] 
[PATCH] geode-aes: use unsigned long for spin_lock_irqsave

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] fs: nobh_truncate_page() fix
Dave Kleikamp [Tue, 6 Mar 2007 09:42:12 +0000 (01:42 -0800)] 
[PATCH] fs: nobh_truncate_page() fix

This fixes a regression caused by 22c8ca78f20724676b6006232bf06cc3e9299539.

nobh_prepare_write() no longer marks the page uptodate, so
nobh_truncate_page() needs to do it.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] fix vsyscall settimeofday
Daniel Walker [Tue, 6 Mar 2007 09:42:11 +0000 (01:42 -0800)] 
[PATCH] fix vsyscall settimeofday

I've only seen this on x86_64.

The vsyscall state only gets updated when a timer interrupts comes in.  So
if the time is set long before the next timer, there will be a period when
a gettimeofday() won't reflect the correct time.

I added an explicit update_vsyscall() during the settimeofday(), that way
the vsyscall state doesn't get stale.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] mqueue: nested locking annotation
Peter Zijlstra [Tue, 6 Mar 2007 09:42:09 +0000 (01:42 -0800)] 
[PATCH] mqueue: nested locking annotation

Fix http://bugzilla.kernel.org/show_bug.cgi?id=8130

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] remove arch/i386/kernel/tsc.c:custom_sched_clock
Adrian Bunk [Tue, 6 Mar 2007 09:42:08 +0000 (01:42 -0800)] 
[PATCH] remove arch/i386/kernel/tsc.c:custom_sched_clock

Remove the no longer used custom_sched_clock.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode
Thomas Gleixner [Tue, 6 Mar 2007 09:42:08 +0000 (01:42 -0800)] 
[PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode

The TIMER_SOFTIRQ runs the hrtimers during bootup until a usable
clocksource and clock event sources are registered.  The switch to high
resolution mode happens inside of the TIMER_SOFTIRQ, but runs the softirq
afterwards.  That way the tick emulation timer, which was set up in the
switch to highres might be executed in the softirq context, which is a BUG.
 The rbtree has not to be touched by the softirq after the highres switch.

This BUG was observed by Andres Salomon, who provided the information to
debug it.

Return early from the softirq, when the switch was sucessful.

[dilinger@debian.org: add debug warning]
[akpm@linux-foundation.org: make debug warning compile]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@debian.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] hrtimers: hrtimer_clock_base description typo
Andres Salomon [Tue, 6 Mar 2007 09:42:07 +0000 (01:42 -0800)] 
[PATCH] hrtimers: hrtimer_clock_base description typo

The description for the hrtimer_clock_base struct describes "hrtimer_base".
 That should be hrtimer_clock_base.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] hrtimers: fix HRTIMER_CB_IRQSAFE_NO_SOFTIRQ description
Andres Salomon [Tue, 6 Mar 2007 09:42:06 +0000 (01:42 -0800)] 
[PATCH] hrtimers: fix HRTIMER_CB_IRQSAFE_NO_SOFTIRQ description

The description for HRTIMER_CB_IRQSAFE_NO_SOFTIRQ is backwards; "NO
SOFTIRQ" sounds a whole lot like it means it must not be run in a softirq.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] i386: make x86_64 tsc header require i386 rather than vice-versa
Andres Salomon [Tue, 6 Mar 2007 09:42:05 +0000 (01:42 -0800)] 
[PATCH] i386: make x86_64 tsc header require i386 rather than vice-versa

Prior to commit 95492e4646e5de8b43d9a7908d6177fb737b61f0 ([PATCH] x86:
rewrite SMP TSC sync code), the headers in asm-i386 did not really require
anything in include/asm-x86_64.  This means that distributions such as
fedora did not include asm-x86_64 in kernel-devel headers for i386.  Ingo's
commit changed that, and broke things.  This is easy enough to hack around
in package builds by just including asm-x86_64 on i386, but that's kind of
annoying.  If anything, x86_64 should depend upon i386, not the other way
around.

This patch changes it so that asm-x86_64/tsc.h includes asm-i386/tsc.h,
rather than vice-versa.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 3
Thomas Gleixner [Tue, 6 Mar 2007 09:42:04 +0000 (01:42 -0800)] 
[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 3

The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Fix 2.6.21 rfcomm lockups
Mark Lord [Tue, 6 Mar 2007 09:42:03 +0000 (01:42 -0800)] 
[PATCH] Fix 2.6.21 rfcomm lockups

Any attempt to open/use a bluetooth rfcomm device locks up
scheduling completely on my machine.

Interrupts (ping, alt-sysrq) seem to be alive, but nothing else.

This was working fine in 2.6.20, broken now in 2.6.21-rc2-git*

Reverting this change (below) fixes it:

| author    Marcel Holtmann <marcel@holtmann.org>
|      Sat, 17 Feb 2007 22:58:57 +0000 (23:58 +0100)
| committer    David S. Miller <davem@sunset.davemloft.net>
|      Mon, 26 Feb 2007 19:42:41 +0000 (11:42 -0800)
| commit    c1a3313698895d8ad4760f98642007bf236af2e8
| tree    337a876f727061362b6a169f8759849c105b8f7a    tree | snapshot
| parent    f5ffd4620aba9e55656483ae1ef5c79ba81f5403    commit | diff
| | [Bluetooth] Make use of device_move() for RFCOMM TTY devices
| | In the case of bound RFCOMM TTY devices the parent is not available
| before its usage. So when opening a RFCOMM TTY device, move it to
| the corresponding ACL device as a child. When closing the device,
| move it back to the virtual device tree.
| Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The simplest fix for this bug is to prevent sysfs_move_dir()
from self-deadlocking when (old_parent == new_parent).

This patch prevents total system lockup when using rfcomm devices.

Signed-off-by: Mark Lord <mlord@pobox.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] fbdev: fix kconfig error if FB_DDC=n
James Simmons [Tue, 6 Mar 2007 09:42:02 +0000 (01:42 -0800)] 
[PATCH] fbdev: fix kconfig error if FB_DDC=n

Fix the following error if FB_DDC=n

Kernel: arch/x86_64/boot/bzImage is ready  (#1)
  Building modules, stage 2.
  MODPOST 229 modules
WARNING: "fb_ddc_read" [drivers/video/nvidia/nvidiafb.ko] undefined!
make[1]: *** [__modpost] Error 1

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] atyfb: fix kconfig error part 2
Randy Dunlap [Tue, 6 Mar 2007 09:42:01 +0000 (01:42 -0800)] 
[PATCH] atyfb: fix kconfig error part 2

Fix implicit declarations and missing code in atyfb.

drivers/video/aty/atyfb_base.c:2137: warning: implicit declaration of function 'a
ty_ld_lcd'
drivers/video/aty/atyfb_base.c:2154: warning: implicit declaration of function 'a
ty_st_lcd'
atyfb_base.c:(.text+0x33e5c): undefined reference to `aty_ld_lcd'
atyfb_base.c:(.text+0x33eb2): undefined reference to `aty_st_lcd'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] nvidiafb backlight: Fix implicit declaration in nv_backlight
Dave Jones [Tue, 6 Mar 2007 09:42:00 +0000 (01:42 -0800)] 
[PATCH] nvidiafb backlight: Fix implicit declaration in nv_backlight

drivers/video/nvidia/nv_backlight.c: In function 'nvidia_bl_init':
drivers/video/nvidia/nv_backlight.c:103: error: implicit declaration of function 'pmac_has_backlight_type'

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] fix build with CONFIG_NO_IDLE_HZ=n
Andrew Morton [Tue, 6 Mar 2007 09:41:58 +0000 (01:41 -0800)] 
[PATCH] fix build with CONFIG_NO_IDLE_HZ=n

arch/i386/kernel/vmi.c: In function 'vmi_safe_halt':
arch/i386/kernel/vmi.c:262: warning: implicit declaration of function 'vmi_stop_hz_timer'
arch/i386/kernel/vmi.c:266: warning: implicit declaration of function 'vmi_account_time_restart_hz_timer'

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Save/restore periodic tick information over suspend/resume
Thomas Gleixner [Tue, 6 Mar 2007 07:25:42 +0000 (08:25 +0100)] 
[PATCH] Save/restore periodic tick information over suspend/resume

The programming of periodic tick devices needs to be saved/restored
across suspend/resume - otherwise we might end up with a system coming
up that relies on getting a PIT (or HPET) interrupt, while those devices
default to 'no interrupts' after powerup. (To confuse things it worked
to a certain degree on some systems because the lapic gets initialized
as a side-effect of SMP bootup.)

This suspend / resume thing was dropped unintentionally during the
last-minute -mm code reshuffling.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agosdhci: release irq during suspend
Pierre Ossman [Tue, 6 Mar 2007 12:38:49 +0000 (13:38 +0100)] 
sdhci: release irq during suspend

Release the device's irq during sleep, as all well-behaved drivers
should.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
17 years agosdhci: make isr tolerant of read errors
Mark Lord [Tue, 6 Mar 2007 12:30:13 +0000 (13:30 +0100)] 
sdhci: make isr tolerant of read errors

The interrupt is shared with another device, which resumes earlier than the
sdhci controller, and generates an interrupt.

The sdhci interrupt handler runs, sees 0xffffffff in its own device's
interrupt status, and tries to handle it..  The reason for the 0xffffffff
is that the device is still suspended, and *all* regs are reading back
0xffffffff.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
17 years agommc: require explicit support for high-speed
Pierre Ossman [Sun, 18 Feb 2007 11:07:47 +0000 (12:07 +0100)] 
mmc: require explicit support for high-speed

The new high-speed timings are similar to each other and the old
system, but not identical. And although things "just work" most of
the time, sometimes it does not. So we need to start marking which
hosts are known to fully comply with the new timings.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
17 years agoncpfs: make sure server connection survives a kill
Pierre Ossman [Mon, 19 Feb 2007 10:34:43 +0000 (11:34 +0100)] 
ncpfs: make sure server connection survives a kill

Use internal buffers instead of the ones supplied by the caller
so that a caller can be interrupted without having to abort the
entire ncp connection.

Signed-off-by: Pierre Ossman <ossman@cendio.se>
Acked-by: Petr Vandrovec <petr@vandrovec.name>
17 years agosis900 warning fixes
Andrew Morton [Tue, 6 Mar 2007 10:41:55 +0000 (02:41 -0800)] 
sis900 warning fixes

drivers/net/sis900.c: In function 'sis900_reset_phy':
drivers/net/sis900.c:972: warning: 'status' may be used uninitialized in this function
drivers/net/sis900.c: In function 'sis900_check_mode':
drivers/net/sis900.c:1431: warning: 'status' may be used uninitialized in this function
drivers/net/sis900.c: In function 'sis900_timer':
drivers/net/sis900.c:1467: warning: 'status' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agomv643xx_eth: Place explicit port number in mv643xx_eth_platform_data
Dale Farnsworth [Sat, 3 Mar 2007 13:40:28 +0000 (06:40 -0700)] 
mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data

We were using the platform_device.id field to identify which ethernet
port is used for mv643xx_eth device.  This is not generally correct.
It will be incorrect, for example, if a hardware platform uses a single
port but not the first port.  Here, we add an explicit port_number field
to struct mv643xx_eth_platform_data.

This makes the mv643xx_eth_platform_data structure required, but that
isn't an issue since all users currently provide it already.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agopcnet32: Fix PCnet32 performance bug on non-coherent architecutres
Don Fry [Tue, 6 Mar 2007 02:13:09 +0000 (18:13 -0800)] 
pcnet32: Fix PCnet32 performance bug on non-coherent architecutres

The PCnet32 driver always passed the the size of the largest possible packet
to the pci_dma_sync_single_for_cpu and pci_dma_sync_single_for_device.
This results in a fairly large "colateral damage" in the caches and makes
the flush operation itself much slower.  On a system with a 40MHz CPU this
patch increases network bandwidth by about 12%.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago__devinit & __devexit cleanups for de2104x driver
Prarit Bhargava [Tue, 6 Mar 2007 10:42:00 +0000 (02:42 -0800)] 
__devinit & __devexit cleanups for de2104x driver

Fixes MODPOST warnings similar to:

WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to
.init.text:de_init_one from .data.rel.local after 'de_driver' (at offset 0x20)
WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to
.exit.text:de_remove_one from .data.rel.local after 'de_driver' (at offset 0x28)

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago3c59x: Handle pci_enable_device() failure while resuming
Dmitriy Monakhov [Tue, 6 Mar 2007 10:41:59 +0000 (02:41 -0800)] 
3c59x: Handle pci_enable_device() failure while resuming

Handle pci_enable_device() failure while resuming, we can safely exit here.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodmfe: Fix link detection
Maxim Levitsky [Tue, 6 Mar 2007 10:41:53 +0000 (02:41 -0800)] 
dmfe: Fix link detection

Add link detection

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodmfe: fix two bugs
Maxim Levitsky [Tue, 6 Mar 2007 10:41:52 +0000 (02:41 -0800)] 
dmfe: fix two bugs

Fix a oops on module removal due to deallocating memory before unregistring
driver Fix a NULL pointer dereference when dev_alloc_skb fails

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodmfe: trivial/spelling fixes
Maxim Levitsky [Tue, 6 Mar 2007 10:41:51 +0000 (02:41 -0800)] 
dmfe: trivial/spelling fixes

Fix a typo, wrap lines on 80-th column, change KERN_ERR to KERN_INFO for
link status message

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agorevert "drivers/net/tulip/dmfe: support basic carrier detection"
Andrew Morton [Tue, 6 Mar 2007 10:41:49 +0000 (02:41 -0800)] 
revert "drivers/net/tulip/dmfe: support basic carrier detection"

Revert 7628b0a8c01a02966d2228bdf741ddedb128e8f8.  Thomas Bachler
reports:

  Commit 7628b0a8c01a02966d2228bdf741ddedb128e8f8 (drivers/net/tulip/dmfe:
  support basic carrier detection) breaks networking on my Davicom DM9009.
  ethtool always reports there is no link.  tcpdump shows incoming packets,
  but TX is disabled.  Reverting the above patch fixes the problem.

Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Thomas Bachler <thomas@archlinux.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: returns NETDEV_TX_BUSY when BD ring is full
Li Yang [Tue, 6 Mar 2007 08:54:05 +0000 (16:54 +0800)] 
ucc_geth: returns NETDEV_TX_BUSY when BD ring is full

Returns NETDEV_TX_BUSY when BD ring is full.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: Fix BD processing
Li Yang [Tue, 6 Mar 2007 08:53:46 +0000 (16:53 +0800)] 
ucc_geth: Fix BD processing

Fix broken BD processing code.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agonatsemi: netpoll fixes
Sergei Shtylyov [Mon, 5 Mar 2007 20:10:08 +0000 (00:10 +0400)] 
natsemi: netpoll fixes

Fix two issues in this driver's netpoll path: one usual, with spin_unlock_irq()
enabling interrupts which nobody asks it to do (that has been fixed recently in
a number of drivers) and one unusual, with poll_controller() method possibly
causing loss of interrupts due to the interrupt status register being cleared
by a simple read and the interrpupt handler simply storing it, not accumulating.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding: Improve IGMP join processing
Jay Vosburgh [Thu, 1 Mar 2007 01:03:37 +0000 (17:03 -0800)] 
bonding: Improve IGMP join processing

In active-backup mode, the current bonding code duplicates IGMP
traffic to all slaves, so that switches are up to date in case of a
failover from an active to a backup interface.  If bonding then fails
back to the original active interface, it is likely that the "active
slave" switch's IGMP forwarding for the port will be out of date until
some event occurs to refresh the switch (e.g., a membership query).

This patch alters the behavior of bonding to no longer flood
IGMP to all ports, and to issue IGMP JOINs to the newly active port at
the time of a failover.  This insures that switches are kept up to date
for all cases.

"GOELLESCH Niels" <niels.goellesch@eurocontrol.int> originally
reported this problem, and included a patch.  His original patch was
modified by Jay Vosburgh to additionally remove the existing IGMP flood
behavior, use RCU, streamline code paths, fix trailing white space, and
adjust for style.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding: only receive ARPs for us
Jay Vosburgh [Thu, 1 Mar 2007 01:03:27 +0000 (17:03 -0800)] 
bonding: only receive ARPs for us

The ARP validation code only needs ARPs for the bonding device.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding: fix double dev_add_pack
Jay Vosburgh [Thu, 1 Mar 2007 01:03:20 +0000 (17:03 -0800)] 
bonding: fix double dev_add_pack

Bonding can erroneously register the same packet_type to receive
ARPs (for use by ARP validation): once at device open time, and once via
sysfs.  Since sysfs can change the validate setting (and thus register
or unregister) at any time, a flag is needed to synchronize with device
open in order to avoid double registrations, and the simplest place is
within the packet_type structure itself.  Double unregister is not an
issue.

Bug reported by Ulrich Oelmann <ulrich.oelmann@web.de>.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] paravirt: re-enable COMPAT_VDSO
Ingo Molnar [Mon, 5 Mar 2007 13:46:30 +0000 (14:46 +0100)] 
[PATCH] paravirt: re-enable COMPAT_VDSO

CONFIG_PARAVIRT broke old glibc bootup: it silently turned off the
selectability of CONFIG_COMPAT_VDSO and thus rendered distro kernels
unbootable on old-style VDSO glibc setups.

the proper solution is to keep COMPAT_VDSO available - if a hypervisor
needs any modification of that concept then we'll judge those changes in
full context, once those changes are submitted.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight
Linus Torvalds [Mon, 5 Mar 2007 16:25:43 +0000 (08:25 -0800)] 
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Allow enable/disable of fb backlights, fixing regressions
  backlight: Fix nvidia backlight initial brightness

17 years ago[PATCH] disable NMI watchdog by default
Ingo Molnar [Mon, 5 Mar 2007 12:20:11 +0000 (13:20 +0100)] 
[PATCH] disable NMI watchdog by default

there's a new NMI watchdog related problem: KVM crashes on certain
bzImages because ... we enable the NMI watchdog by default (even if the
user does not ask for it) , and no other OS on this planet does that so
KVM doesnt have emulation for that yet. So KVM injects a #GP, which
crashes the Linux guest:

 general protection fault: 0000 [#1]
 PREEMPT SMP
 Modules linked in:
 CPU:    0
 EIP:    0060:[<c011a8ae>]    Not tainted VLI
 EFLAGS: 00000246   (2.6.20-rc5-rt0 #3)
 EIP is at setup_apic_nmi_watchdog+0x26d/0x3d3

and no, i did /not/ request an nmi_watchdog on the boot command line!

Solution: turn off that darn thing! It's a debug tool, not a 'make life
harder' tool!!

with this patch the KVM guest boots up just fine.

And with this my laptop (Lenovo T60) also stopped its sporadic hard
hanging (sometimes in acpi_init(), sometimes later during bootup,
sometimes much later during actual use) as well. It hung with both
nmi_watchdog=1 and nmi_watchdog=2, so it's generally the fact of NMI
injection that is causing problems, not the NMI watchdog variant, nor
any particular bootup code.

[ NMI breaks on some systems, esp in combination with SMM -Arjan ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] paravirt: let users decide whether they want VMI
Ingo Molnar [Mon, 5 Mar 2007 12:15:40 +0000 (13:15 +0100)] 
[PATCH] paravirt: let users decide whether they want VMI

do not use default=y for CONFIG_VMI (we do not do that for any driver or
special-hardware feature): the overwhelming majority of Linux users does
not need it, and interested users and distributions can enable it
as-needed.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] paravirt: clarify VMI description
Ingo Molnar [Mon, 5 Mar 2007 12:13:46 +0000 (13:13 +0100)] 
[PATCH] paravirt: clarify VMI description

Clarify the description of the CONFIG_VMI option: describe the reality
that VMI is a VMWare-only interface for now. Once that changes and
another hypervisor adopts the VMI ABI we can change the text.

As can be seen from the Xen paravirtualization patches submitted to lkml
the Xen project has chosen its own, non-VMI interface between Xen and
the para-Linux - so remove Xen from the description.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] paravirt: remove NO_IDLE_HZ on x86
Ingo Molnar [Mon, 5 Mar 2007 11:29:28 +0000 (12:29 +0100)] 
[PATCH] paravirt: remove NO_IDLE_HZ on x86

Temove the mistaken turning on of NO_IDLE_HZ on x86+PARAVIRT kernels.

It's an obsolete, limited form of dynticks.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] video/aty/mach64_ct.c: fix bogus delay loop
David Miller [Mon, 5 Mar 2007 09:35:36 +0000 (01:35 -0800)] 
[PATCH] video/aty/mach64_ct.c: fix bogus delay loop

CT based mach64 cards were reported to hang on sparc64 boxes when
compiled with gcc-4.1.x and later.

Looking at this piece of code, it's no surprise.  A critical
delay was implemented as an empty for() loop, and gcc 4.0.x
and previous did not optimize it away, so we did get a delay.

But gcc-4.1.x and later can optimize it away, and we get crashes.

Use a real udelay() to fix this.  Fix verified on SunBlade100.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] arch/i386/kernel/vmi.c must #include <asm/kmap_types.h>
Adrian Bunk [Mon, 5 Mar 2007 08:30:56 +0000 (00:30 -0800)] 
[PATCH] arch/i386/kernel/vmi.c must #include <asm/kmap_types.h>

  CC      arch/i386/kernel/vmi.o
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c: In function 'vmi_map_pt_hook':
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: 'KM_PTE0' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: for each function it appears in.)
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: 'KM_PTE1' undeclared (first use in this function)
make[2]: *** [arch/i386/kernel/vmi.o] Error 1

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] usb-storage: do not rebuild when kernel version changes
Sam Ravnborg [Mon, 5 Mar 2007 08:30:55 +0000 (00:30 -0800)] 
[PATCH] usb-storage: do not rebuild when kernel version changes

Replacing use of UTS_RELEASE with utsname()->release avoids that the
usb-storage driver is recompiled each time the kernel version changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Documentation for io-accounting / reporting via procfs
Roland Kletzing [Mon, 5 Mar 2007 08:30:54 +0000 (00:30 -0800)] 
[PATCH] Documentation for io-accounting / reporting via procfs

Add some documentation for the new and very useful io-accounting feature.
It's being added to Documentation/filesystems/proc.txt

Signed-off-by: Roland Kletzing <devzero@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] atyfb: Fix kconfig error
Antonino A. Daplas [Mon, 5 Mar 2007 08:30:54 +0000 (00:30 -0800)] 
[PATCH] atyfb: Fix kconfig error

Fix the following compile error:

  MODPOST 327 modules
WARNING: "aty_st_lcd" [drivers/video/aty/atyfb.ko] undefined!
WARNING: "aty_ld_lcd" [drivers/video/aty/atyfb.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] char/epca.c: remove unused function
Michal Piotrowski [Mon, 5 Mar 2007 08:30:53 +0000 (00:30 -0800)] 
[PATCH] char/epca.c: remove unused function

"drivers/char/epca.c:2741: warning: 'get_termio' defined but not used"

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] timer/hrtimer: take per cpu locks in sane order
Heiko Carstens [Mon, 5 Mar 2007 08:30:51 +0000 (00:30 -0800)] 
[PATCH] timer/hrtimer: take per cpu locks in sane order

Doing something like this on a two cpu system

  # echo 0 > /sys/devices/system/cpu/cpu0/online
  # echo 1 > /sys/devices/system/cpu/cpu0/online
  # echo 0 > /sys/devices/system/cpu/cpu1/online

will give me this:

  =======================================================
  [ INFO: possible circular locking dependency detected ]
  2.6.21-rc2-g562aa1d4-dirty #7
  -------------------------------------------------------
  bash/1282 is trying to acquire lock:
   (&cpu_base->lock_key){.+..}, at: [<000000000005f17e>] hrtimer_cpu_notify+0xc6/0x240

  but task is already holding lock:
   (&cpu_base->lock_key#2){.+..}, at: [<000000000005f174>] hrtimer_cpu_notify+0xbc/0x240

  which lock already depends on the new lock.

This happens because we have the following code in kernel/hrtimer.c:

  migrate_hrtimers(int cpu)
  [...]
  old_base = &per_cpu(hrtimer_bases, cpu);
  new_base = &get_cpu_var(hrtimer_bases);
  [...]
  spin_lock(&new_base->lock);
  spin_lock(&old_base->lock);

Which means the spinlocks are taken in an order which depends on which cpu
gets shut down from which other cpu. Therefore lockdep complains that there
might be an ABBA deadlock. Since migrate_hrtimers() gets only called on
cpu hotplug it's safe to assume that it isn't executed concurrently on a

The same problem exists in kernel/timer.c: migrate_timers().

As pointed out by Christian Borntraeger one possible solution to avoid
the locking order complaints would be to make sure that the locks are
always taken in the same order. E.g. by taking the lock of the cpu with
the lower number first.

To achieve this we introduce two new spinlock functions double_spin_lock
and double_spin_unlock which lock or unlock two locks in a given order.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Christian Borntraeger <cborntra@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] clocksource init adjustments (fix bug #7426)
john stultz [Mon, 5 Mar 2007 08:30:50 +0000 (00:30 -0800)] 
[PATCH] clocksource init adjustments (fix bug #7426)

This patch resolves the issue found here:
http://bugme.osdl.org/show_bug.cgi?id=7426

The basic summary is:
Currently we register most of i386/x86_64 clocksources at module_init
time. Then we enable clocksource selection at late_initcall time. This
causes some problems for drivers that use gettimeofday for init
calibration routines (specifically the es1968 driver in this case),
where durring module_init, the only clocksource available is the low-res
jiffies clocksource. This may cause slight calibration errors, due to
the small sampling time used.

It should be noted that drivers that require fine grained time may not
function on architectures that do not have better then jiffies
resolution timekeeping (there are a few). However, this does not
discount the reasonable need for such fine-grained timekeeping at init
time.

Thus the solution here is to register clocksources earlier (ideally when
the hardware is being initialized), and then we enable clocksource
selection at fs_initcall (before device_initcall).

This patch should probably get some testing time in -mm, since
clocksource selection is one of the most important issues for correct
timekeeping, and I've only been able to test this on a few of my own
boxes.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] x86_64: remove unusued 'flags' variable
David Rientjes [Mon, 5 Mar 2007 08:30:49 +0000 (00:30 -0800)] 
[PATCH] x86_64: remove unusued 'flags' variable

Removes unused 'flags' variable from setup_IO_APIC_irq().

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] ipmi: check, if default ports are accessible on PPC
Christian Krafft [Mon, 5 Mar 2007 08:30:48 +0000 (00:30 -0800)] 
[PATCH] ipmi: check, if default ports are accessible on PPC

ipmi_si_intf tries to access default ports, if no device could be found
elsewhere.  On PPC we have a function to check, if these legacy IO ports
are accessible.  This patch adds a check for these ports on PPC.  This
patch fixes a breakage of IPMI module on PPC machines without a BMC.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] ecryptfs: handle AOP_TRUNCATED_PAGE better
Dmitriy Monakhov [Mon, 5 Mar 2007 08:30:47 +0000 (00:30 -0800)] 
[PATCH] ecryptfs: handle AOP_TRUNCATED_PAGE better

- In fact we don't have to fail if AOP_TRUNCATED_PAGE was returned from
  prepare_write or commit_write. It is beter to retry attempt where it
  is possible.

- Rearange ecryptfs_get_lower_page() error handling logic, make it more clean.

Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] ecryptfs: lower root result must be adirectory
Dmitriy Monakhov [Mon, 5 Mar 2007 08:30:46 +0000 (00:30 -0800)] 
[PATCH] ecryptfs: lower root result must be adirectory

- Currently after path_lookup succeed we dot't have any guarantie what
  it is DIR. This must be explicitly demanded.
- path_lookup can't return negative dentry, So inode check is useless.

Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] fix "NMI appears to be stuck"
Thomas Gleixner [Mon, 5 Mar 2007 08:30:45 +0000 (00:30 -0800)] 
[PATCH] fix "NMI appears to be stuck"

  Testing NMI watchdog ... CPU#0: NMI appears to be stuck (54->54)!
  CPU#1: NMI appears to be stuck (0->0)!

Keep the PIT/HPET alive when nmi_watchdog = 1 is given on the command
line.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] md: fix for raid6 reshape
NeilBrown [Mon, 5 Mar 2007 08:30:44 +0000 (00:30 -0800)] 
[PATCH] md: fix for raid6 reshape

Recent patch for raid6 reshape had a change missing that showed up in
subsequent review.

Many places in the raid5 code used "conf->raid_disks-1" to mean "number of
data disks".  With raid6 that had to be changed to "conf->raid_disk -
conf->max_degraded" or similar.  One place was missed.

This bug means that if a raid6 reshape were aborted in the middle the
recorded position would be wrong.  On restart it would either fail (as the
position wasn't on an appropriate boundary) or would leave a section of the
array unreshaped, causing data corruption.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: smp fixes
Zachary Amsden [Mon, 5 Mar 2007 08:30:43 +0000 (00:30 -0800)] 
[PATCH] vmi: smp fixes

Critical fixes for SMP.

Fix a couple functions which needed to be __devinit and fix a bogus parameter
to AP startup that just so happened to work because the low virtual mapping of
memory was still established.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: apic ops
Zachary Amsden [Mon, 5 Mar 2007 08:30:41 +0000 (00:30 -0800)] 
[PATCH] vmi: apic ops

Use para_fill instead of directly setting the APIC ops to the result of the
vmi_get_function call - this allows one to implement a VMI ROM without
implementing APIC functions, just using the native APIC functions.

While doing this, I realized that there is a lot more cleanup that should have
been done.  Basically, we should never assume that the ROM implements a
specific set of functions, and always allow fallback to the native
implementation.

This is critical for future compatibility.

Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: fix nohz compile
Zachary Amsden [Mon, 5 Mar 2007 08:30:41 +0000 (00:30 -0800)] 
[PATCH] vmi: fix nohz compile

More goo from hrtimers integration.  We do compile and run properly with NO_HZ
enabled.  There was a period when we didn't because of a missing export, but
that was since fixed.

And with the clocksource code now firmly in place, we can get rid of code that
fixes up the wallclock, since this is done in the common infrastructure.  This
actually fixes a timer bug as well, that was caused by do_settimeofday no
longer being callable with interrupts disabled due to the use of
on_each_cpu().

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: pit override
Zachary Amsden [Mon, 5 Mar 2007 08:30:39 +0000 (00:30 -0800)] 
[PATCH] vmi: pit override

The time_init_hook in paravirt-ops no longer functions in the correct manner
after the integration of the hrtimers code.  The problem is that now the call
path for time initialization is:

  time_init :
       late_time_init = hpet_time_init;

  late_time_init -> hpet_time_init:
       setup_pit_timer (BAD)
       do_time_init --> (via paravirt.h)
          time_init_hook --> (via arch_hooks.h)
              time_init_hook (in SUBARCH/setup.c)

If this isn't confusing enough, the paravirt case goes through an indirect
function pointer in the paravirt-ops table.  The problem is, by the time the
paravirt hook is called, the pit timer is already enabled.

But paravirt guests have their own timer, and don't want to use the PIT.
Rather than intensify the struggle for power going on here, just make it all
nice and simple and just unconditionally do all timer setup in the
late_time_init hook.  This also has the advantage of enabling timers in the
same place in all code paths, so everyone has the same bugs and we don't have
outliers who break other code because they turn on timer too early or too
late.

So the paravirt-ops time init function is now by default hpet_time_init, which
is the time init function used for native hardware.  Paravirt guests have the
chance to override this when they setup the paravirt-ops table, and should
need no change.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: paravirt drop udelay op
Zachary Amsden [Mon, 5 Mar 2007 08:30:38 +0000 (00:30 -0800)] 
[PATCH] vmi: paravirt drop udelay op

Not respecting udelay causes problems with any virtual hardware that is passed
through to real hardware.  This can be noticed by any device that interacts
with the real world in real time - like AP startup, which takes real time.  Or
keyboard LEDs, which should blink in real-time.  Or floppy drives, but only
when passed through to a real floppy controller on OSes which can't
sufficiently buffer the floppy commands to emulate a zero latency floppy.  Or
IDE drives, when connecting to a physical CDROM.

This was mostly a hack to get the kernel to boot faster, but it introduced a
number of misvirtualization bugs, and Alan and Pavel argued pretty strongly
against it.  We were the only client, and now want to clean up this cruft.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: fix highpte
Zachary Amsden [Mon, 5 Mar 2007 08:30:37 +0000 (00:30 -0800)] 
[PATCH] vmi: fix highpte

Provide a PT map hook for HIGHPTE kernels to designate where they are mapping
page tables.  This information is required so the physical address of PTE
updates can be determined; otherwise, the mm layer would have to carry the
physical address all the way to each PTE modification callsite, which is even
more hideous that the macros required to provide the proper hooks.

So lets not mess up arch neutral code to achieve this, but keep the horror in
an #ifdef HIGHPTE in include/asm-i386/pgtable.h.  I had to use macros here
because some types are not yet defined in all the include paths for this
header.

This patch is absolutely required for HIGHPTE kernels to operate properly with
VMI.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: cpu cycles fix
Zachary Amsden [Mon, 5 Mar 2007 08:30:36 +0000 (00:30 -0800)] 
[PATCH] vmi: cpu cycles fix

In order to share the common code in tsc.c which does CPU Khz calibration, we
need to make an accurate value of CPU speed available to the tsc.c code.  This
value loses a lot of precision in a VM because of the timing differences with
real hardware, but we need it to be as precise as possible so the guest can
make accurate time calculations with the cycle counters.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: sched clock paravirt op fix
Zachary Amsden [Mon, 5 Mar 2007 08:30:35 +0000 (00:30 -0800)] 
[PATCH] vmi: sched clock paravirt op fix

The custom_sched_clock hook is broken.  The result from sched_clock needs to
be in nanoseconds, not in CPU cycles.  The TSC is insufficient for this
purpose, because TSC is poorly defined in a virtual environment, and mostly
represents real world time instead of scheduled process time (which can be
interrupted without notice when a virtual machine is descheduled).

To make the scheduler consistent, we must expose a different nature of time,
that is scheduled time.  So deprecate this custom_sched_clock hack and turn it
into a paravirt-op, as it should have been all along.  This allows the tsc.c
code which converts cycles to nanoseconds to be shared by all paravirt-ops
backends.

It is unfortunate to add a new paravirt-op, but this is a very distinct
abstraction which is clearly different for all virtual machine
implementations, and it gets rid of an ugly indirect function which I
ashamedly admit I hacked in to try to get this to work earlier, and then even
got in the wrong units.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] vmi: timer fixes round two
Zachary Amsden [Mon, 5 Mar 2007 08:30:34 +0000 (00:30 -0800)] 
[PATCH] vmi: timer fixes round two

Critical bugfixes for the VMI-Timer code.

1) Do not setup a one shot alarm if we are keeping the periodic alarm
   armed.  Additionally, since the periodic alarm can be run at a lower rate
   than HZ, let's fixup the guard to the no-idle-hz mode appropriately.  This
   fixes the bug where the no-idle-hz mode might have a higher interrupt rate
   than the non-idle case.

2) The interrupt handler can no longer adjust xtime due to nested lock
   acquisition.  Drop this.  We don't need to check for wallclock time at
   every tick, it can be done in userspace instead.

3) Add a bypass to disable noidle operation.  This is useful as a last
   minute workaround, or testing measure.

4) The code to skip the IO_APIC timer testing (no_timer_check) should be
   conditional on IO_APIC, not SMP, since UP kernels can have this configured
   in as well.

Signed-off-by: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Page migration: Fix vma flag checking
Christoph Lameter [Mon, 5 Mar 2007 08:30:33 +0000 (00:30 -0800)] 
[PATCH] Page migration: Fix vma flag checking

Currently we do not check for vma flags if sys_move_pages is called to move
individual pages.  If sys_migrate_pages is called to move pages then we
check for vm_flags that indicate a non migratable vma but that still
includes VM_LOCKED and we can migrate mlocked pages.

Extract the vma_migratable check from mm/mempolicy.c, fix it and put it
into migrate.h so that is can be used from both locations.

Problem was spotted by Lee Schermerhorn

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] fb: sm501fb off-by-1 sysfs store
Paul Mundt [Mon, 5 Mar 2007 08:30:31 +0000 (00:30 -0800)] 
[PATCH] fb: sm501fb off-by-1 sysfs store

Currently sm501fb_crtsrc_store() won't allow the routing to be changed via
echos from userspace in to the sysfs file.  The reason for this is that the
strnicmp() for both heads uses a sizeof() for the string length, which ends
up being strlen() + 1 (\0 in the normal case, but the echo gives a newline,
which is where the issue occurs), this then causes a mismatch and
subsequently bails with the -EINVAL.

In addition to this, the hardcoded lengths were then used for the store
length that was returned, which ended up being erroneous and resulting in a
write error.  There's also no point in returning anything but the full
length since it will -EINVAL out on a mismatch well before then anyways.

sizeof("string") is great for making sure you have space in your buffer,
but rather less so for string comparisons :-)

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] sched: remove SMT nice
Con Kolivas [Mon, 5 Mar 2007 08:30:29 +0000 (00:30 -0800)] 
[PATCH] sched: remove SMT nice

Remove the SMT-nice feature which idles sibling cpus on SMT cpus to
facilitiate nice working properly where cpu power is shared.  The idling of
cpus in the presence of runnable tasks is considered too fragile, easy to
break with outside code, and the complexity of managing this system if an
architecture comes along with many logical cores sharing cpu power will be
unworkable.

Remove the associated per_cpu_gain variable in sched_domains used only by
this code.

Also:

  The reason is that with dynticks enabled, this code breaks without yet
  further tweaks so dynticks brought on the rapid demise of this code.  So
  either we tweak this code or kill it off entirely.  It was Ingo's preference
  to kill it off.  Either way this needs to happen for 2.6.21 since dynticks
  has gone in.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] shmem and simple const super_operations
Hugh Dickins [Mon, 5 Mar 2007 08:30:28 +0000 (00:30 -0800)] 
[PATCH] shmem and simple const super_operations

shmem's super_operations were missed from the recent const-ification;
and simple_fill_super()'s, which can share with get_sb_pseudo()'s.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] schedule wext/rtnl for removal
Johannes Berg [Mon, 5 Mar 2007 08:30:27 +0000 (00:30 -0800)] 
[PATCH] schedule wext/rtnl for removal

Since wext is being replaced as fast as we can (it'll probably stick around
for legacy drivers though) and the wext/netlink stuff was never really
used, this schedules it for removal.

The removal schedule is tight but there are no users of the code, the main
user of the wext user interface are the wireless-tools, they only have an
alpha version using the netlink interface and even that is incomplete.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] dz: remove struct pt_regs references
Maciej W. Rozycki [Mon, 5 Mar 2007 08:30:26 +0000 (00:30 -0800)] 
[PATCH] dz: remove struct pt_regs references

Remove remaining references to saved registers now that
uart_handle_sysrq_char() does not want them.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] gpio_keys driver shouldn't be ARM-specific
David Brownell [Mon, 5 Mar 2007 08:30:22 +0000 (00:30 -0800)] 
[PATCH] gpio_keys driver shouldn't be ARM-specific

The gpio_keys driver is wrongly ARM-specific; it can't build on
other platforms with GPIO suport.  This fixes that problem.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: pHilipp Zabel <philipp.zabel@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Ben Nizette <ben.nizette@iinet.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] add CONFIG_GENERIC_GPIO
David Brownell [Mon, 5 Mar 2007 08:30:18 +0000 (00:30 -0800)] 
[PATCH] add CONFIG_GENERIC_GPIO

Most drivers using GPIOs already know they are running on a system that
supports the generic GPIO calls, because of other platform dependencies.
But the generic GPIO-based LED and input button drivers can't know that.

So this patch adds a Kconfig hook, GENERIC_GPIO, to mark the platforms
where <asm/gpio.h> will do the right thing.  Currently that's a bunch of
ARMs, and AVR32; more are on the way.

It also fixes a dependency bug for the gpio button input driver; it was
wrong to start with, now it covers all platforms with GENERIC_GPIO.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: <raph@8d.com>
Cc: <msvoboda@ra.rockwell.com>
Cc: pHilipp Zabel <philipp.zabel@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Fix soft lockup with iSeries viocd driver
Tony Breeds [Mon, 5 Mar 2007 08:30:14 +0000 (00:30 -0800)] 
[PATCH] Fix soft lockup with iSeries viocd driver

Fix soft lockup with iSeries viocd driver, caused by eventually calling
end_that_request_first() with nr_bytes 0.

Some versions of hald do an SG_IO ioctl on the viocd device which becomes a
request with hard_nr_sectors and hard_cur_sectors set to zero.  Passing zero
as the number of sectors to end_request() (which calls
end_that_request_first()) causes an infinite loop when the bio is being freed.

This patch makes sure that the zero is never passed.  It only requires some
number larger the the request size the terminate the loop.

The lockup is triggered by hald, interrogating the device.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] parport is an orphan
David Brownell [Mon, 5 Mar 2007 08:30:13 +0000 (00:30 -0800)] 
[PATCH] parport is an orphan

The writing on the wall seem to be that the parport stack is orphaned,
rather than maintained by four folk ...  and having a webpage that says the
latest patches are based on a 2.5 kernel.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] ecryptfs: check xattr operation support fix
Dmitriy Monakhov [Mon, 5 Mar 2007 08:30:12 +0000 (00:30 -0800)] 
[PATCH] ecryptfs: check xattr operation support fix

  - ecryptfs_write_inode_size_to_metadata() error code was ignored.
  - i_op->setxattr() must be supported by lower fs because used below.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] msi: support masking msi irqs without a mask bit
Eric W. Biederman [Mon, 5 Mar 2007 08:30:11 +0000 (00:30 -0800)] 
[PATCH] msi: support masking msi irqs without a mask bit

For devices that do not support msi-x we only support 1 interrupt.  Therefore
we can disable that one interrupt by disabling the msi capability itself.  If
we leave the intx interrupts disabled while we have the msi capability
disabled no interrupts should be delivered from that device.

Devices with just the minimal msi support (and thus hitting this code path)
include things like the intel e1000 nic, so it looks like is going to be a
fairly common case and thus important to get right.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] msi: fix up the msi enable/disable logic
Eric W. Biederman [Mon, 5 Mar 2007 08:30:10 +0000 (00:30 -0800)] 
[PATCH] msi: fix up the msi enable/disable logic

enable/disable_msi_mode have several side effects which keeps them from being
generally useful.  So this patch replaces them with with two much more
targeted functions: msi_set_enable and msix_set_enable.

This patch makes pci_dev->msi_enabled and pci_dev->msix_enabled the definitive
way to test if linux has enabled the msi capability, and has the appropriate
msi data structures set up.

This patch ensures that while writing the msi messages in save/restore and
during device initialization we have the msi capability disabled so we don't
get into races.  The pci spec requires that we do not have the msi capability
enabled and the msi messages unmasked while we write the messages.  Completely
disabling the capability is overkill but it is easy :)

Care has been taken so we never have both a msi capability and intx enabled
simultaneously.  We haven't run into a problem yet but better safe then sorry.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] msi: sanely support hardware level msi disabling
Eric W. Biederman [Mon, 5 Mar 2007 08:30:07 +0000 (00:30 -0800)] 
[PATCH] msi: sanely support hardware level msi disabling

In some cases when we are not using msi we need a way to ensure that the
hardware does not have an msi capability enabled.  Currently the code has been
calling disable_msi_mode to try and achieve that.  However disable_msi_mode
has several other side effects and is only available when msi support is
compiled in so it isn't really appropriate.

Instead this patch implements pci_msi_off which disables all msi and msix
capabilities unconditionally with no additional side effects.

pci_disable_device was redundantly clearing the bus master enable flag and
clearing the msi enable bit.  A device that is not allowed to perform bus
mastering operations cannot generate intx or msi interrupt messages as those
are essentially a special case of dma, and require bus mastering.  So the call
in pci_disable_device to disable msi capabilities was redundant.

quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] io_apic.h needs apicdef.h
Jean Delvare [Mon, 5 Mar 2007 08:30:06 +0000 (00:30 -0800)] 
[PATCH] io_apic.h needs apicdef.h

A -mm patch caused:

In file included from drivers/pci/quirks.c:532:
include/asm/io_apic.h:61: error: "MAX_IO_APICS" undeclared here (not in a function)

So let's include the needed header.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] cyclades: return closing_wait
Andrew Morton [Mon, 5 Mar 2007 08:30:04 +0000 (00:30 -0800)] 
[PATCH] cyclades: return closing_wait

In http://bugzilla.kernel.org/show_bug.cgi?id=8065, Shen points out that the
cyclades driver forget to return closing_wait to userspace.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Shen <shanlu@cs.uiuc.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agobacklight: Allow enable/disable of fb backlights, fixing regressions
Richard Purdie [Sat, 3 Mar 2007 17:43:52 +0000 (17:43 +0000)] 
backlight: Allow enable/disable of fb backlights, fixing regressions

Enabling the backlight by default appears to cause problems for many
users. This patch disables backlight controls unless explicitly
enabled by users via a module parameter. Since PMAC users are known
to work, default to enabled in that case.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
17 years agobacklight: Fix nvidia backlight initial brightness
Richard Purdie [Mon, 26 Feb 2007 22:06:09 +0000 (22:06 +0000)] 
backlight: Fix nvidia backlight initial brightness

Fix a mix up when the nvidia driver was converted resulting
in the backlight having an incorrect initial brightness.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sun, 4 Mar 2007 21:31:00 +0000 (13:31 -0800)] 
Merge /pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: make legacy IDE VLB modules check for the "probe" kernel params (v2)
  ide: remove some obsoleted kernel params (v2)
  ide/pci/delkin_cb.c: pci_module_init to pci_register_driver
  scc_pata: bugfix for checking DMA IRQ status
  ide: remove a ton of pointless #undef REALLY_SLOW_IO
  siimage: DRAC4 note
  adjust legacy IDE resource setting (v2)
  ide: fix pmac breakage
  ide-cs: Update device table
  ide: ide_get_best_pio_mode() returns incorrect IORDY setting (take 2)
  piix/slc90e66: more tuneproc() fixing (take 2)
  ide: fix drive side 80c cable check, take 2
  cmd64x: fix PIO mode setup (take 3)
  alim15x3: fix PIO mode setup

17 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Sun, 4 Mar 2007 21:25:28 +0000 (13:25 -0800)] 
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] pata_jmicron: build fix

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Sun, 4 Mar 2007 21:22:12 +0000 (13:22 -0800)] 
Merge /pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5260): Cx88-blackbird: allow usage of both 376836 and 262144 sized firmware images
  V4L/DVB (5366): Pvrusb2: Fix compilation warning for amd64 builds (use %zu instead of %u)