Jean-Francois Moine [Tue, 13 Jan 2009 08:55:40 +0000 (05:55 -0300)] 
V4L/DVB (10356): gspca - sonixj: Cleanup code.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 10 Jan 2009 19:14:12 +0000 (16:14 -0300)]
V4L/DVB (10354): gspca - tv8532: Change the max brightness.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 10 Jan 2009 19:11:25 +0000 (16:11 -0300)]
V4L/DVB (10353): gspca - some subdrivers: Don't get the control values from the webcam.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sat, 10 Jan 2009 18:54:44 +0000 (15:54 -0300)]
V4L/DVB (10352): gspca - spca508: Cleanup code.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Fri, 9 Jan 2009 12:13:26 +0000 (09:13 -0300)]
V4L/DVB (10350): gspca - tv8532: Cleanup code.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Thu, 8 Jan 2009 19:30:58 +0000 (16:30 -0300)]
V4L/DVB (10348): gspca - mars: Bad isoc packet scanning.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Thu, 8 Jan 2009 19:29:38 +0000 (16:29 -0300)]
V4L/DVB (10347): gspca - mars: Optimize, rewrite initialization and add controls.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Thu, 8 Jan 2009 12:38:45 +0000 (09:38 -0300)]
V4L/DVB (10346): gspca - zc3xx: Fix bad variable type with i2c read.
The returned value of i2c read is a 16 bits word. It was stored in
a 8 bits variable, preventing a sensor to be detected.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Wed, 7 Jan 2009 19:49:57 +0000 (16:49 -0300)]
V4L/DVB (10345): gspca - jpeg subdrivers: One quantization table per subdriver.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antonio Ospite [Wed, 7 Jan 2009 12:09:36 +0000 (09:09 -0300)] 
V4L/DVB (10344): gspca - ov534: Disable the Hercules webcams.
The Hercules webcam based on ov534 use different sensor than Playstation Eye,
disable them until full support is provided.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Wed, 7 Jan 2009 11:00:18 +0000 (08:00 -0300)]
V4L/DVB (10343): gspca - zc3xx / zc0301: Handle the 0ac8:303b instead of zc0301.
This webcam is generic and some sensors are not treated by
the driver zc0301.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andren [Wed, 7 Jan 2009 09:11:50 +0000 (06:11 -0300)] 
V4L/DVB (10342): gspca - stv06xx: Add ctrl caching to the vv6410.
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andren [Wed, 7 Jan 2009 09:09:27 +0000 (06:09 -0300)]
V4L/DVB (10341): gspca - stv06xx: Plug a memory leak in the pb0100 sensor driver.
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Thu, 1 Jan 2009 16:20:42 +0000 (13:20 -0300)]
V4L/DVB (10337): gspca - common: Simplify the debug macros.
The err, warning and info redefinitions don't need the use of
do {} while.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Thu, 1 Jan 2009 16:04:58 +0000 (13:04 -0300)] 
V4L/DVB (10336): gspca - all subdrivers: Return ret instead of -1 in sd_mod_init.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Thu, 1 Jan 2009 16:02:07 +0000 (13:02 -0300)]
V4L/DVB (10335): gspca - all subdrivers: Fix CodingStyle in sd_mod_init function.
Introduce int ret and check it value after call to usb_register().
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andren [Wed, 31 Dec 2008 17:33:53 +0000 (14:33 -0300)]
V4L/DVB (10334): gspca - stv06xx: Rework control description.
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Wed, 31 Dec 2008 11:13:46 +0000 (08:13 -0300)]
V4L/DVB (10333): gspca - main and many subdrivers: Remove the epaddr variable.
The transfer endpoint address is now automatically chosen.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Wed, 31 Dec 2008 10:27:42 +0000 (07:27 -0300)]
V4L/DVB (10332): gspca - main: Version change.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jose Alberto Reguero [Fri, 23 Jan 2009 22:23:23 +0000 (19:23 -0300)] 
V4L/DVB (10330): af9015: New remote RM-KS for Avermedia Volar-X
The new Avermedia Volar-X is shipped with a new remote(RM-KS). The attached
patch add a new option to the remote parameter of dvb_usb_af9015 for this
remote.
Signed-off-by: Felipe Morales Moreno <felipe.morales.moreno@gmail.com>
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 23 Jan 2009 15:11:14 +0000 (12:11 -0300)] 
V4L/DVB (10329): af9015: remove dual_mode module param
Remove dual_mode module param. Possible 2nd FE seems not to be buggy
any more and therefore can be enabled as default.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Douglas Schilling Landgraf [Sun, 25 Jan 2009 22:19:23 +0000 (19:19 -0300)] 
V4L/DVB (10327): em28xx: Add check before call em28xx_isoc_audio_deinit()
Just call em28xx_isoc_audio_deinit() if em28xx sent a usb_submit().
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Douglas Schilling Landgraf [Sun, 25 Jan 2009 18:12:29 +0000 (15:12 -0300)]
V4L/DVB (10326): em28xx: Cleanup: fix bad whitespacing
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Sun, 25 Jan 2009 15:53:09 +0000 (12:53 -0300)]
V4L/DVB (10324): em28xx: Correct mailing list
Move development mail-list to linux-media on vger.kernel.org.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Douglas Schilling Landgraf [Mon, 19 Jan 2009 12:31:55 +0000 (09:31 -0300)]
V4L/DVB (10323): em28xx: Add entry for GADMEI TVR200
Added entry for GADMEI TVR200.
Thanks to Yohanes Nugroho <yohanes@gmail.com> for testing and data collection.
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 21 Jan 2009 04:55:45 +0000 (01:55 -0300)] 
V4L/DVB (10321): dib0700: Report dib0700_i2c_enumeration failures
Make it clear that a failure in dib0700_i2c_enumeration is a fatal condition
and we cannot continue. If the failure occurs, do not attempt to attach to
the tuner.
Problem Noticed the issue when debugging an i2c issue a YUAN High-Tech
STK7700PH for user Roshan Karki <roshan@olenepal.org>.
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Wed, 21 Jan 2009 04:40:04 +0000 (01:40 -0300)]
V4L/DVB (10320): dib0700: fix i2c error message to make data type clear
Make it clear that the address is in hex format.
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Arne Luehrs [Wed, 21 Jan 2009 04:37:20 +0000 (01:37 -0300)] 
V4L/DVB (10319): dib0700: enable IR receiver in Nova TD usb stick (52009)
Adds the IR data structure to the configuration datastructure of the
Hauppauge WinTV Nova-TD USB stick (52009)
Provided remote control is the same as theone provided with the Nova-T500
Card.
Signed-off-by: Arne Luehrs <arne.luehrs@googlemail.com>
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alexey Klimov [Sun, 25 Jan 2009 23:05:58 +0000 (20:05 -0300)]
V4L/DVB (10316): v4l/dvb: use usb_make_path in usb-radio drivers
Place usb_make_path in dsbr100.c, radio-mr800.c, radio-si470x.c that
used when reporting bus_info information in vidioc_querycap.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 26 Jan 2009 22:13:05 +0000 (19:13 -0300)] 
V4L/DVB (10313): saa7146: fix VIDIOC_ENUMSTD.
The previous conversion to video_ioctl2 broke VIDIOC_ENUMSTD. This
is now fixed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thierry MERLE [Tue, 20 Jan 2009 21:19:25 +0000 (18:19 -0300)] 
V4L/DVB (10309): s2255drv: use usb_make_path to report bus info
usb_make_path reports canonical bus info. Use it when reporting bus info
in VIDIOC_QUERYCAP.
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thierry MERLE [Tue, 27 Jan 2009 19:53:23 +0000 (16:53 -0300)]
V4L/DVB (10308): uvcvideo: use usb_make_path to report bus info
usb_make_path reports canonical bus info. Use it when reporting bus info
in VIDIOC_QUERYCAP.
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thierry MERLE [Tue, 20 Jan 2009 21:01:33 +0000 (18:01 -0300)]
V4L/DVB (10307): em28xx: use usb_make_path to report bus info
usb_make_path reports canonical bus info. Use it when reporting bus info
in VIDIOC_QUERYCAP.
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thierry MERLE [Tue, 20 Jan 2009 20:40:44 +0000 (17:40 -0300)]
V4L/DVB (10306): usbvision: use usb_make_path to report bus info
usb_make_path reports canonical bus info. Use it when reporting bus info
in VIDIOC_QUERYCAP.
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 24 Jan 2009 00:35:12 +0000 (21:35 -0300)] 
V4L/DVB (10305): videobuf-vmalloc: Fix: videobuf memory were never freed
videobuf_vmalloc_free() is never freeing the video buffer memory. Due to
that, after multiple open/closes, user can suffer a panic:
Kernel BUG at mm/slab.c:2650
invalid opcode: 0000 [1] SMP
last sysfs file: /class/video4linux/video0/dev
CPU 4
Modules linked in: vivi(U) videodev(U) v4l1_compat(U) v4l2_compat_ioctl32(U) videobuf_vmalloc(U) videobuf_core(U) ipv6 xfrm_nalgo autofs4 vmnet(U) vmblock(U) vmci(U) vmmon(U) ip_conntrack_netbios_ns ipt_REJECT xt_state ip_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables cpufreq_ondemand dm_mirror dm_log dm_multipath scsi_dh dm_mod video backlight sbs i2c_ec button battery asus_acpi acpi_memhotplug ac lp testmgr_cipher testmgr aead crypto_blkcipher crypto_algapi crypto_api arc4 snd_hda_intel nvidia(PFU) snd_seq_dummy snd_seq_oss snd_seq_midi_event rt73usb crc_itu_t snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss tg3 sr_mod snd_pcm snd_timer snd_page_alloc snd_hwdep pcspkr rt2500usb cdrom rt2x00usb rt2x00lib libphy snd parport_pc soundcore shpchp serio_raw i2c_i801 i5400_edac parport ata_piix sg mac80211 edac_mc i2c_core cfg80211 ahci libata sd_mod scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd
Pid: 6215, comm: v4l-stress-buff Tainted: PF 2.6.18-118.el5 #1
RIP: 0010:[<
ffffffff80017506>] [<
ffffffff80017506>] cache_grow+0x1e/0x395
RSP: 0018:
ffff810128a35d28 EFLAGS:
00010006
RAX:
0000000000000000 RBX:
00000000000080d0 RCX:
00000000ffffffff
RDX:
0000000000000000 RSI:
00000000000080d0 RDI:
ffff8101042d8340
RBP:
ffff8101042ce5e0 R08:
ffff81012fc1e8c0 R09:
ffff8101042eac00
R10:
0000000000000000 R11:
ffffffff882a5139 R12:
ffff8101042d8340
R13:
ffff8101042ce5c0 R14:
0000000000000000 R15:
ffff8101042d8340
FS:
0000000000000000(0000) GS:
ffff81012fc24d40(0063) knlGS:
00000000f7f706c0
CS: 0010 DS: 002b ES: 002b CR0:
000000008005003b
CR2:
00000000f7f9a000 CR3:
0000000117ad0000 CR4:
00000000000006e0
Process v4l-stress-buff (pid: 6215, threadinfo
ffff810128a34000, task
ffff810128fcb820)
Stack:
ffffc20012a39000 0000004415173ff8 ffff810000011c10 000280d200000000
0000000000000002 00000000ffffffff ffff8101042ce5e0 ffff81012fc1e8c0
ffff8101042ce5c0 000000000000000c ffff8101042d8340 ffffffff8005bdde
Call Trace:
[<
ffffffff8005bdde>] cache_alloc_refill+0x136/0x186
[<
ffffffff800d7822>] kmem_cache_alloc_node+0x98/0xb2
[<
ffffffff800cda1f>] __vmalloc_area_node+0x62/0x153
[<
ffffffff800cdd65>] vmalloc_user+0x15/0x50
[<
ffffffff882a521f>] :videobuf_vmalloc:__videobuf_iolock+0xe6/0x155
[<
ffffffff8838f958>] :vivi:buffer_prepare+0xb9/0xe6
[<
ffffffff882981f3>] :videobuf_core:__videobuf_read_start+0xa2/0x10f
[<
ffffffff882983e6>] :videobuf_core:videobuf_read_stream+0x9c/0x1f3
[<
ffffffff8000b3f3>] vfs_read+0xcb/0x171
[<
ffffffff80011967>] sys_read+0x45/0x6e
[<
ffffffff8006149b>] sysenter_do_call+0x1b/0x67
Code: 0f 0b 68 af 1e 2a 80 c2 5a 0a f6 c7 20 0f 85 53 03 00 00 89
RIP [<
ffffffff80017506>] cache_grow+0x1e/0x395
RSP <
ffff810128a35d28>
<0>Kernel panic - not syncing: Fatal exception
Thanks to Douglas Schilling Landgraf <dougsland@gmail.com> for writing a
stress tool for testing and to Robert Krakora <rob.krakora@messagenetsystems.com>
to trace the code and discover the point where the bug were happening.
Thanks also to Magnus Damm <damm@igel.co.jp> that provided us a fix for
a similar bug on videobuf-dma-contig.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Magnus Damm [Wed, 10 Dec 2008 04:54:32 +0000 (01:54 -0300)] 
V4L/DVB (10304): buf-dma-contig: fix USERPTR free handling
This patch fixes a free-without-alloc bug for V4L2_MEMORY_USERPTR
video buffers.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Fri, 23 Jan 2009 04:20:24 +0000 (01:20 -0300)] 
V4L/DVB (10303): pvrusb2: Use usb_make_path() to determine device bus location
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Douglas Kosovic [Fri, 23 Jan 2009 02:07:26 +0000 (23:07 -0300)] 
V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver
It's a quad Bt878 PCI-e x1 capture board that's basically the same as the
IVC-200 (quad Bt878 PCI) capture board that's currently supported in
the V4L2 bttv driver.
Manufacturer's web page for IVCE-8784 with photo and info:
http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784
Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 8 Jan 2009 12:13:42 +0000 (09:13 -0300)] 
V4L/DVB (10298): remove err macro from few usb devices
Patch removes err() macros from few usb devices.
It places pr_err in pvrusb2-v4l2.c, dev_err in dabusb and in usbvision
drivers. Beside placing dev_err, patch defines new s2255_dev_err macro
with S2255_DRIVER_NAME in s2255 module.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Thierry Merle <thierry.merle@free.fr>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 22 Jan 2009 15:45:10 +0000 (12:45 -0300)] 
V4L/DVB (10296): uvcvideo: Fix memory leak in input device handling
The dynamically allocated input_dev->phys buffer isn't freed when
unregistering the device. As the input layer doesn't provide any release
callback, use a fixed-size buffer inside the uvc_device structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sun, 18 Jan 2009 20:46:30 +0000 (17:46 -0300)]
V4L/DVB (10295): uvcvideo: Retry URB buffers allocation when the system is low on memory.
URB buffers for video transfers are sized to UVC_MAX_PACKETS bulk/isochronous
packets by default. If the system is too low on memory try successively
smaller numbers of packets until allocation succeeds.
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Wed, 14 Jan 2009 15:49:11 +0000 (12:49 -0300)]
V4L/DVB (10294): uvcvideo: Add support for the Alcor Micro AU3820 chipset.
The Alcor Micro AU3820 chipset (found in the Future Boy PC USB webcam)
requires the MINMAX quirk. Add a corresponding entry in the device IDs list.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 8 Jan 2009 17:05:11 +0000 (14:05 -0300)]
V4L/DVB (10293): uvcvideo: replace strn{cpy,cat} with strl{cpy,cat}.
strncpy is unsafe as it doesn't append a terminating NUL character when the
source string doesn't fit in the destination buffer. Replace it with strlcpy.
strncat is misused as its size argument refers to the source string, not the
destination buffer. Replace it with strlcat.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 21 Jan 2009 20:06:42 +0000 (17:06 -0300)]
V4L/DVB (10291): em28xx: fix VIDIOC_G_CTRL when there is no msp34xx device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 13 Jan 2009 15:47:28 +0000 (12:47 -0300)]
V4L/DVB (10286): af9015: add new USB ID for KWorld DVB-T 395U
Add new USB ID 1b80:e39b for KWorld DVB-T 395U. This device revision does
have Quantek QT1010 silicon tuner.
Thanks-to: Ray Chen <swyear@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 19 Jan 2009 21:31:22 +0000 (18:31 -0300)] 
V4L/DVB (10284): cx18: Add initial entry for a Leadtek DVR3100 H hybrid card
Card report provided by Patryk on the ivtv-devel list:
http://ivtvdriver.org/pipermail/ivtv-devel/2009-January/005922.html
Reported-by: Pat <tatyrza@mm.pl>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 17 Jan 2009 16:37:36 +0000 (13:37 -0300)]
V4L/DVB (10283): cx18: Call request_module() with proper argument types.
request_module() needs to be called with a string literal for a
format string or with 1 or more variable arguments to avoid
compiler warnings and possible exploits, if someone could cause
us to get a format string with a '%' code in the format string
when we make the call.
Reported-by: Brandon Jenkins <bcjenkins@tvwhere.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 11 Jan 2009 18:08:53 +0000 (15:08 -0300)]
V4L/DVB (10281): cx18: Conversion to new V4L2 framework: use v4l2_device object
First step in conversion to the new V4L2 framework. Added per cx18 device
instance of the v4l2_device and its registration.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 11 Jan 2009 00:54:39 +0000 (21:54 -0300)]
V4L/DVB (10280): cx18: Rename structure members: dev to pci_dev and v4l2dev to video_dev
Renamed structure member name to be more specific to type in anticipation
of updating to the v4l2_device/v4l2_subdev framework. Too many objects named
"dev" and /v4l2_\{0,1\}dev/ would be to confusing.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 10 Jan 2009 17:13:46 +0000 (14:13 -0300)]
V4L/DVB (10279): cx18: Print driver version number when logging status
Make sure v4l2-ctl --log-status outputs the driver version.
Reported-by: David Dombroski <davedom@optonline.net>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 5 Jan 2009 00:51:17 +0000 (21:51 -0300)]
V4L/DVB (10278): cx18: Fix bad audio in first analog capture.
Normalize the APU state before the second firmware load so that audio
for the first analog capture is correct.
Many thanks to Conexant for supporting me in finding a solution for this
problem.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 3 Jan 2009 17:21:30 +0000 (14:21 -0300)]
V4L/DVB (10277): cx18, cx2341x: Fix bugs in cx18 AC3 control and comply with V4L2 spec
Fix bugs in the cx18 AC3 control implementation that would have affected
ivtv and other drivers via the cx2341x module. Bring AC3 controls
behavior into comliance with V4L2 specification. Thanks to Hans Verkuil
for reviewing the previous patch and pointing out the problems.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 1 Jan 2009 22:02:31 +0000 (19:02 -0300)]
V4L/DVB (10276): cx18, cx2341x, ivtv: Add AC-3 audio encoding control to cx18
Initial addition of controls to set AC-3 audio encoding for the CX23418 - it
does not work yet due to firmware or cx18 driver issues. This change affects
the common cx2341x and ivtv modules due to shared structures and
common functions.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 1 Jan 2009 15:35:06 +0000 (12:35 -0300)]
V4L/DVB (10275): cx18: Additional debug to display outgoing mailbox parameters
Added debug display of outgoing mailbox arguments. Fixed a minor problem
with display of stale incoming mailbox contents, when user was not looking for
debug warnings.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 1 Jan 2009 14:09:24 +0000 (11:09 -0300)]
V4L/DVB (10274): cx18: Fix a PLL divisor update for the I2S master clock
A redundant PLL divisior update for the I2S master clock after AV core
firmware load was missed in earlier PLL parameter changes. This one really
doesn't matter because it's redundant and gets overwritten, but the driver
should be self consistent in the values used.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 19 Jan 2009 07:14:17 +0000 (04:14 -0300)]
V4L/DVB (10272): av7110: test type field in VIDIOC_G_SLICED_VBI_CAP
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 18 Jan 2009 22:59:11 +0000 (19:59 -0300)]
V4L/DVB (10271): saa7146: convert to video_ioctl2.
The conversion to video_ioctl2 is the first phase to converting this driver
to the latest v4l2 framework.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sat, 17 Jan 2009 15:23:31 +0000 (12:23 -0300)] 
V4L/DVB (10269): Add support for DVBWorld DVBS2 PCI-e 2005.
DVBWorld DVBS2 PCI-e 2005 card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/DVBWorld_DVB-S2_2005_PCI-Express_Card
The card tested by me (Igor).
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sat, 17 Jan 2009 13:16:36 +0000 (10:16 -0300)]
V4L/DVB (10268): Proper implement set_voltage in cx24116.
Now there is a card, which uses cx24116 to control LNB DC voltage.
It is DVBWorld DVBS2 PCI-e 2005.
The patch is nedded to add support for that card.
1. Rename CMD_SET_TONEPRE to CMD_LNBDCLEVEL.
2. Fill set_voltage with actually control voltage code.
3. Correct set_tone to not affect voltage.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sat, 17 Jan 2009 15:18:26 +0000 (12:18 -0300)]
V4L/DVB (10267): Add support for TeVii S470 DVB-S2 PCI-e card.
TeVii S470 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TeVii_S470
The card tested by me (Igor).
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sat, 17 Jan 2009 15:11:20 +0000 (12:11 -0300)]
V4L/DVB (10266): Add support for TurboSight TBS6920 DVB-S2 PCI-e card.
TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TBS_6920
The card tested by me (Igor).
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antoine Jacquet [Sun, 18 Jan 2009 01:49:08 +0000 (22:49 -0300)] 
V4L/DVB (10263): zr364xx: add support for Aiptek DV T300
Tested-by: Hámorszky Balázs <balihb@freepop.hu>
Signed-off-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Fri, 16 Jan 2009 06:09:34 +0000 (03:09 -0300)]
V4L/DVB (10259): pvrusb2: Code module name directly in printk
The name of the pvrusb2 module is not likely to ever change, and there
are plenty of other places where the name is directly coded, so there
is little utility in using a macro to infer the module name here. In
addition, using that macro complicates other uses of the driver
involving older kernels where this macro works differently. Yes I
know for many places we don't have to worry about that. But my
alternative is that I have to build special logic in the pvrusb2
standalone driver to special-case what is otherwise costmetic and that
is just plain nuts for something as trivial as this, especially since
this change does not at all have any compile time or run time impact
on the driver. I'm just removing a nicety that didn't have a lot of
value here to begin with.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Fri, 16 Jan 2009 06:06:02 +0000 (03:06 -0300)]
V4L/DVB (10258): pvrusb2: Issue VIDIOC_INT_INIT to v4l2 modules when they first attach
It appears that various v4l-dvb drivers are changing to require
explicit initialization before use. This change to the pvrusb2 driver
implements an automatic issuance of VIDIOC_INT_INIT when a module is
bound to the driver, thus conforming to the new behavior.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Robert Krakora [Mon, 19 Jan 2009 00:44:46 +0000 (21:44 -0300)] 
V4L/DVB (10255): em28xx: Clock (XCLK) Cleanup
Clock (XCLK) Cleanup
Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 15 Jan 2009 09:09:05 +0000 (06:09 -0300)]
V4L/DVB (10252): v4l2 doc: explain why v4l2_device_unregister_subdev() has to be called.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 15 Jan 2009 08:53:18 +0000 (05:53 -0300)]
V4L/DVB (10251): cx25840: add comments explaining what the init() does.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 18 Jan 2009 22:37:59 +0000 (19:37 -0300)]
V4L/DVB (10249): v4l2-common: added v4l2_i2c_tuner_addrs()
Add v4l2_i2c_tuner_addrs() to obtain the various I2C tuner addresses.
This will be used in several drivers, so make this a common function
as we do not want to have these I2C addresses all over the place.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 17 Jan 2009 15:17:14 +0000 (12:17 -0300)]
V4L/DVB (10247): saa7134: convert to the new v4l2 framework.
Register v4l2_device and switch to v4l2_subdev to access the i2c modules.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 14 Jan 2009 09:54:38 +0000 (06:54 -0300)]
V4L/DVB (10246): saa6752hs: convert to v4l2_subdev.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 17 Jan 2009 14:26:59 +0000 (11:26 -0300)]
V4L/DVB (10244): v4l2: replace a few snprintfs with strlcpy
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Nam Phạm Thành [Mon, 12 Jan 2009 05:50:17 +0000 (02:50 -0300)] 
V4L/DVB (10242): pwc: add support for webcam snapshot button
This patch adds support for Philips webcam snapshot button as an
event input device, for consistency with other webcam drivers.
Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Wed, 14 Jan 2009 07:40:57 +0000 (04:40 -0300)]
V4L/DVB (10239): pvrusb2: Fix misleading comment caused by earlier commit
Previous v4l-dvb changeset id
4cc8ed11e2e0 changed the pvrusb2-hdw
internal API regarding i2c chip debug register access. However that
change failed to also update the corresponding function comment
describing the API. As driver maintained I never saw a request for an
ack on that change; there probably should have been one especially
since the manner in which this API operates was changed - its
interface is now entangled with a v4l specific struct and I would have
preferred to keep this API clear of moving-target v4l-isms such as
this one if at all possible which is why I had done it the way I did
before. But whatever. This commit at least fixes the comment issue.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Wed, 14 Jan 2009 07:24:20 +0000 (04:24 -0300)]
V4L/DVB (10238): pvrusb2: Change sysfs serial number handling
Use the new pvrusb2 internal API to grab the device identifier, rather
than generating it directly. This unifies some code and make possible
use of that identifier in places other than sysfs.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Wed, 14 Jan 2009 07:22:56 +0000 (04:22 -0300)]
V4L/DVB (10237): pvrusb2: Generate a device-unique identifier
Implement a new internal function to create a string device
identifier. This ID stays with the specific device, making it useful
to user space to identify specific devices. We use the serial number
if available; otherwise we give up and just spit out a unit/instance ID.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Wed, 14 Jan 2009 07:21:29 +0000 (04:21 -0300)]
V4L/DVB (10236): pvrusb2: Stop advertising VBI capability - it isn't there
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 12 Jan 2009 21:17:14 +0000 (18:17 -0300)]
V4L/DVB (10231): v4l2-subdev: add v4l2_ext_controls support
The saa6752hs module needs this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 11 Jan 2009 13:29:43 +0000 (10:29 -0300)]
V4L/DVB (10211): vivi: Implements 4 inputs on vivi
This patch adds the capability of selecting between 4 different inputs
on vivi driver. Input 0 is the normal color bar, while inputs 1-3 are
modified color bars.
This allows testing input selection on userspace applications and
serves as an implementation model for other drivers.
The current approach allows a maximum of 10 different inputs, since the
input name generator assumes that we need just one digit to present the
input. It shouldn't be hard to modify it to present a bigger name of
inputs, but, in fact, it doesn't make much sense of doing it for this
test driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linus Torvalds [Sun, 29 Mar 2009 20:05:41 +0000 (13:05 -0700)] 
Merge branch 'bzip2-lzma-for-linus' of git://git./linux/kernel/git/x86/linux-2.6-tip
* 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
bzip2/lzma: don't ask for compression mode for the default initramfs
bzip2/lzma: consistently capitalize LZMA in Kconfig
bzip2/lzma: clarify the meaning of the CONFIG_RD_ options
bzip2/lzma: move CONFIG_RD_* options under CONFIG_EMBEDDED
Ralf Baechle [Sun, 29 Mar 2009 10:59:50 +0000 (12:59 +0200)] 
Fix build error in <linux/irq.h>
<linux/irq.h> relies on <linux/gfp.h> and <linux/topology.h> having been
included previous. If not, the errors like below will result.
CC arch/mips/mti-malta/malta-int.o
In file included from arch/mips/mti-malta/malta-int.c:25:
include/linux/irq.h: In function ‘init_alloc_desc_masks’:
include/linux/irq.h:444: error: implicit declaration of function ‘cpu_to_node’
include/linux/irq.h:446: error: ‘GFP_ATOMIC’ undeclared (first use in this function)
include/linux/irq.h:446: error: (Each undeclared identifier is reported only once
include/linux/irq.h:446: error: for each function it appears in.)
make[3]: *** [arch/mips/mti-malta/malta-int.o] Error 1
make[2]: *** [arch/mips/mti-malta] Error 2
make[1]: *** [sub-make] Error 2
Fixed by including the two missing headers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sun, 29 Mar 2009 04:52:47 +0000 (21:52 -0700)] 
sched: fix errors in struct & function comments
Fix kernel-doc errors in sched.c: the structs don't have
kernel-doc notation and the short function description needs to
be one line only.
Error(kernel/sched.c:3197): cannot understand prototype: 'struct sd_lb_stats '
Error(kernel/sched.c:3228): cannot understand prototype: 'struct sg_lb_stats '
Error(kernel/sched.c:3375): duplicate section name 'Description'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sun, 29 Mar 2009 04:50:17 +0000 (21:50 -0700)]
maple: fix Error in kernel-doc notation
Fix kernel-doc error in maple (it's not kernel-doc):
Error(drivers/sh/maple/maple.c:782): cannot understand prototype: 'struct bus_type maple_bus_type = '
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 29 Mar 2009 00:32:14 +0000 (17:32 -0700)]
Merge branch 'futexes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
futex: remove the pointer math from double_unlock_hb, fix
futex: remove the pointer math from double_unlock_hb
futex: clean up fault logic
futex: unlock before returning -EFAULT
futex: use current->time_slack_ns for rt tasks too
futex: add double_unlock_hb()
futex: additional (get|put)_futex_key() fixes
futex: update futex commentary
Linus Torvalds [Sun, 29 Mar 2009 00:30:42 +0000 (17:30 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
smack: Add a new '-CIPSO' option to the network address label configuration
netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections
lsm: Remove the socket_post_accept() hook
selinux: Remove the "compat_net" compatibility code
netlabel: Label incoming TCP connections correctly in SELinux
lsm: Relocate the IPv4 security_inet_conn_request() hooks
TOMOYO: Fix a typo.
smack: convert smack to standard linux lists
David Howells [Sat, 28 Mar 2009 23:23:01 +0000 (23:23 +0000)] 
Annotate struct fs_struct's usage count restriction
Annotate struct fs_struct's usage count to indicate the restrictions upon it.
It may not be incremented, except by clone(CLONE_FS), as this affects the
check in check_unsafe_exec() in fs/exec.c.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Sat, 28 Mar 2009 23:21:27 +0000 (23:21 +0000)] 
fix setuid sometimes wouldn't
check_unsafe_exec() also notes whether the fs_struct is being
shared by more threads than will get killed by the exec, and if so
sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid.
But /proc/<pid>/cwd and /proc/<pid>/root lookups make transient
use of get_fs_struct(), which also raises that sharing count.
This might occasionally cause a setuid program not to change euid,
in the same way as happened with files->count (check_unsafe_exec
also looks at sighand->count, but /proc doesn't raise that one).
We'd prefer exec not to unshare fs_struct: so fix this in procfs,
replacing get_fs_struct() by get_fs_path(), which does path_get
while still holding task_lock, instead of raising fs->count.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
___
fs/proc/base.c | 50 +++++++++++++++--------------------------------
1 file changed, 16 insertions(+), 34 deletions(-)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Sat, 28 Mar 2009 23:20:19 +0000 (23:20 +0000)]
fix setuid sometimes doesn't
Joe Malicki reports that setuid sometimes doesn't: very rarely,
a setuid root program does not get root euid; and, by the way,
they have a health check running lsof every few minutes.
Right, check_unsafe_exec() notes whether the files_struct is being
shared by more threads than will get killed by the exec, and if so
sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid.
But /proc/<pid>/fd and /proc/<pid>/fdinfo lookups make transient
use of get_files_struct(), which also raises that sharing count.
There's a rather simple fix for this: exec's check on files->count
has been redundant ever since 2.6.1 made it unshare_files() (except
while compat_do_execve() omitted to do so) - just remove that check.
[Note to -stable: this patch will not apply before 2.6.29: earlier
releases should just remove the files->count line from unsafe_exec().]
Reported-by: Joe Malicki <jmalicki@metacarta.com>
Narrowed-down-by: Michael Itz <mitz@metacarta.com>
Tested-by: Joe Malicki <jmalicki@metacarta.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Sat, 28 Mar 2009 23:16:03 +0000 (23:16 +0000)]
compat_do_execve should unshare_files
2.6.26's commit
fd8328be874f4190a811c58cd4778ec2c74d2c05
"sanitize handling of shared descriptor tables in failing execve()"
moved the unshare_files() from flush_old_exec() and several binfmts
to the head of do_execve(); but forgot to make the same change to
compat_do_execve(), leaving a CLONE_FILES files_struct shared across
exec from a 32-bit process on a 64-bit kernel.
It's arguable whether the files_struct really ought to be unshared
across exec; but 2.6.1 made that so to stop the loading binary's fd
leaking into other threads, and a 32-bit process on a 64-bit kernel
ought to behave in the same way as 32 on 32 and 64 on 64.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
H. Peter Anvin [Sun, 29 Mar 2009 00:24:03 +0000 (17:24 -0700)] 
bzip2/lzma: don't ask for compression mode for the default initramfs
Impact: Kconfig noise reduction, documentation
The default initramfs is so small that it makes no sense to worry
about the additional memory taken by not double-compressing it.
Therefore, don't bug the user with it.
Also, improve the description of the option, which was downright
incorrect.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Sat, 28 Mar 2009 23:10:59 +0000 (16:10 -0700)]
bzip2/lzma: consistently capitalize LZMA in Kconfig
Impact: message formatting
Consistently spell LZMA in all capitals, since it (unlike gzip or
bzip2) is an acronym.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Sat, 28 Mar 2009 23:07:13 +0000 (16:07 -0700)]
bzip2/lzma: clarify the meaning of the CONFIG_RD_ options
Impact: Kconfig clarification
Make it clear that the CONFIG_RD_* options are about what formats are
supported, not about what formats are actually being used.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Sat, 28 Mar 2009 22:49:08 +0000 (15:49 -0700)]
bzip2/lzma: move CONFIG_RD_* options under CONFIG_EMBEDDED
Impact: reduce Kconfig noise
Move the options that control possible initramfs/initrd compressions
underneath CONFIG_EMBEDDED. The only impact of leaving these options
set to y is additional code in the init section of the kernel; there
is no reason to burden non-embedded users with these options.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Ingo Molnar [Sat, 28 Mar 2009 22:24:12 +0000 (23:24 +0100)] 
Merge branch 'linus' into core/futexes
Linus Torvalds [Sat, 28 Mar 2009 21:04:53 +0000 (14:04 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c-core: Some style cleanups
i2c-piix4: Add support for the Broadcom HT1100 chipset
i2c-piix4: Add support to SB800 SMBus changes
i2c-pca-platform: Use defaults if no platform_data given
i2c-algo-pca: Use timeout for checking the state machine
i2c-algo-pca: Rework waiting for a free bus
i2c-algo-pca: Add PCA9665 support
i2c: Adapt debug macros for KERN_* constants
i2c-davinci: Fix timeout handling
i2c: Adapter timeout is in jiffies
i2c: Set a default timeout value for all adapters
i2c: Add missing KERN_* constants to printks
i2c-algo-pcf: Handle timeout correctly
i2c-algo-pcf: Style cleanups
eeprom/at24: Remove EXPERIMENTAL
i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79
i2c: Clarify which clients are auto-removed
i2c: Let checkpatch shout on users of the legacy model
i2c: Document the different ways to instantiate i2c devices
Linus Torvalds [Sat, 28 Mar 2009 21:03:14 +0000 (14:03 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
[ARM] 5435/1: fix compile warning in sanity_check_meminfo()
[ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
[ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
[ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
imxfb: Fix TFT mode
i.MX21/27: remove ifdef CONFIG_FB_IMX
imxfb: add clock support
mxc: add arch_reset() function
clkdev: add possibility to get a clock based on the device name
i.MX1: remove fb support from mach-imx
[ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
Gemini: Add support for Teltonika RUT100
Gemini: gpiolib based GPIO support v2
MAINTAINERS: add myself as Gemini architecture maintainer
ARM: Add Gemini architecture v3
[ARM] OMAP: Fix compile for omap2_init_common_hw()
MAINTAINERS: Add myself as Faraday ARM core variant maintainer
ARM: Add support for FA526 v2
[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
[ARM] collie: fix two minor formatting nits
...
Linus Torvalds [Sat, 28 Mar 2009 21:00:33 +0000 (14:00 -0700)]
Merge git://git./linux/kernel/git/arjan/linux-2.6-async-for-30
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30:
fastboot: remove duplicate unpack_to_rootfs()
ide/net: flip the order of SATA and network init
async: remove the temporary (2.6.29) "async is off by default" code
Fix up conflicts in init/initramfs.c manually
Linus Torvalds [Sat, 28 Mar 2009 20:55:49 +0000 (13:55 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
Blackfin arch: be less noisy when gets a gpio conflict after kernel has booted
Blackfin arch: add RSI's definitions to bf514 and bf516
Blackfin arch: add link-time asserts to make sure on-chip regions dont overflow
Blackfin arch: sport spi needs 6 gpio pins
Blackfin arch: add sport-spi related resource stuff to board file
Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as well
Blackfin arch: Privide BF537-STAMP platform data of ADP5520 Multifunction driver
Blackfin arch: enable the platfrom PATA driver with CF Cards
Blackfin arch: clean up sports header file
Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x
Blackfin arch: bf51x processors also have 8 timers
Blackfin arch: add a check to make sure only Blackfin GPIOs may generate IRQs
Blackfin arch: update default kernel configuration
Blackfin arch: include linux headers that this one uses definitions from fro sport drivers
Linus Torvalds [Sat, 28 Mar 2009 20:40:20 +0000 (13:40 -0700)]
Merge branch 'percpu-cpumask-x86-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits)
percpu: fix spurious alignment WARN in legacy SMP percpu allocator
percpu: generalize embedding first chunk setup helper
percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()
percpu: make x86 addr <-> pcpu ptr conversion macros generic
linker script: define __per_cpu_load on all SMP capable archs
x86: UV: remove uv_flush_tlb_others() WARN_ON
percpu: finer grained locking to break deadlock and allow atomic free
percpu: move fully free chunk reclamation into a work
percpu: move chunk area map extension out of area allocation
percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free()
x86, percpu: setup reserved percpu area for x86_64
percpu, module: implement reserved allocation and use it for module percpu variables
percpu: add an indirection ptr for chunk page map access
x86: make embedding percpu allocator return excessive free space
percpu: use negative for auto for pcpu_setup_first_chunk() arguments
percpu: improve first chunk initial area map handling
percpu: cosmetic renames in pcpu_setup_first_chunk()
percpu: clean up percpu constants
x86: un-__init fill_pud/pmd/pte
x86: remove vestigial fix_ioremap prototypes
...
Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
Zhenwen Xu [Sat, 28 Mar 2009 20:34:46 +0000 (21:34 +0100)] 
i2c-core: Some style cleanups
Some lines over 80.
The printk(KERN_ERR ... ) should be dev_err.
And some blankspace should be deleted.
Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Signed-off-by: Jean Delvare <khlai@linux-fr.org>
Flavio Leitner [Sat, 28 Mar 2009 20:34:46 +0000 (21:34 +0100)] 
i2c-piix4: Add support for the Broadcom HT1100 chipset
Add support for the Broadcom HT1100 LD chipset (SMBus function.)
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
projects / linux-2.6 / log
