Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

[SCTP]: Use struct list_head for chunk lists, not sk_buff_head.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Fix warning in ip6_mc_msfilter.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: fix IPv4 leave-group group matching

        This patch fixes the multicast group matching for
IP_DROP_MEMBERSHIP, similar to the IP_ADD_MEMBERSHIP fix in a prior
patch. Groups are identifiedby <group address,interface> and including
the interface address in the match will fail if a leave-group is done
by address when the join was done by index, or if different addresses
on the same interface are used in the join and leave.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: (INCLUDE,empty)/leave-group equivalence for full-state MSF APIs & errno fix

1) Adds (INCLUDE, empty)/leave-group equivalence to the full-state
   multicast source filter APIs (IPv4 and IPv6)

2) Fixes an incorrect errno in the IPv6 leave-group (ENOENT should be
   EADDRNOTAVAIL)

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: multicast API "join" issues

1) In the full-state API when imsf_numsrc == 0
   errno should be "0", but returns EADDRNOTAVAIL

2) An illegal filter mode change
   errno should be EINVAL, but returns EADDRNOTAVAIL

3) Trying to do an any-source option without IP_ADD_MEMBERSHIP
   errno should be EINVAL, but returns EADDRNOTAVAIL

4) Adds comments for the less obvious error return values

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: multicast API "join" issues

1) Changes IP_ADD_SOURCE_MEMBERSHIP and MCAST_JOIN_SOURCE_GROUP to ignore
   EADDRINUSE errors on a "courtesy join" -- prior membership or not
   is ok for these.

2) Adds "leave group" equivalence of (INCLUDE, empty) filters in the
   delta-based API. Without this, mixing delta-based API calls that
   end in an (INCLUDE, empty) filter would not allow a subsequent
   regular IP_ADD_MEMBERSHIP. It also frees socket buffer memory that
   isn't needed for both the multicast group record and source filter.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: multicast API "join" issues

        This patch corrects a few problems with the IP_ADD_MEMBERSHIP
socket option:

1) The existing code makes an attempt at reference counting joins when
   using the ip_mreqn/imr_ifindex interface. Joining the same group
   on the same socket is an error, whatever the API. This leads to
   unexpected results when mixing ip_mreqn by index with ip_mreqn by
   address, ip_mreq, or other API's. For example, ip_mreq followed by
   ip_mreqn of the same group will "work" while the same two reversed
   will not.
           Fixed to always return EADDRINUSE on a duplicate join and
   removed the (now unused) reference count in ip_mc_socklist.

2) The group-search list in ip_mc_join_group() is comparing a full
   ip_mreqn structure and all of it must match for it to find the
   group. This doesn't correctly match a group that was joined with
   ip_mreq or ip_mreqn with an address (with or without an index). It
   also doesn't match groups that are joined by different addresses on
   the same interface. All of these are the same multicast group,
   which is identified by group address and interface index.
           Fixed the check to correctly match groups so we don't get
   duplicate group entries on the ip_mc_socklist.

3) The old code allocates a multicast address before searching for
   duplicates requiring it to free in various error cases. This
   patch moves the allocate until after the search and
   igmp_max_memberships check, so never a need to allocate, then free
   an entry.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Apply sysctl_icmp_echo_ignore_broadcasts to ICMP_TIMESTAMP as well.

This was the full intention of the original code.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Support CONFIG_HZ

Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Fix sparse warnings

From: Victor Fusco <victor@cetuc.puc-rio.br>

Fix the sparse warning "implicit cast to nocast type"

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Transform skb_queue_len() binary tests into skb_queue_empty()

This is part of the grand scheme to eliminate the qlen
member of skb_queue_head, and subsequently remove the
'list' member of sk_buff.

Most users of skb_queue_len() want to know if the queue is
empty or not, and that's trivially done with skb_queue_empty()
which doesn't use the skb_queue_head->qlen member and instead
uses the queue list emptyness as the test.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Typo in dtlb_backend.S, _PAGE_SZ4M --> _PAGE_SZ4MB

Noticed by Eddie C. Dost

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] Add MAINTAINERS entry for audit subsystem

I've been asked about this a couple times, and there's no info in
MAINTAINERS file.  Add MAINTAINERS entry for audit subsystem.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: dm-raid1: Limit bios to size of mirror region

Set the target's split_io field when building a dm-mirror device so
incoming bios won't span the mirror's internal regions.  Without this,
regions can be accessed while not holding correct locks and data corruption
is possible.

Reported-By: "Zhao Qian" <zhaoqian@aaastor.com>
From: Kevin Corry <kevcorry@us.ibm.com>
Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] video doc: one more system where video works with S3

One more system where video works with S3.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: framebuffer device support

This patch is for supporting Epson s1d13xxx framebuffer device for m32r.  #
Sorry, a little bigger.

The Epson s1d13806 is already supported by 2.6.12 kernel, and its driver is
placed as drivers/video/s1d13xxxfb.c.

For the m32r, a header file include/asm-m32r/s1d13806.h was prepared for
several m32r target platforms.  It was originally generated by an Epson
tool S1D13806CFG.EXE, and modified manually for the m32r platforms.

Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: fix fh_expire_type

After discussion at the recent NFSv4 bake-a-thon, I realized that my
assumption that NFS4_FH_PERSISTENT required filehandles to persist was a
misreading of the spec.  This also fixes an interoperability problem with the
Solaris client.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: check lock type against openmode.

We shouldn't be allowing, e.g., write locks on files not open for read.  To
enforce this, we add a pointer from the lock stateid back to the open stateid
it came from, so that the check will continue to be correct even after the
open is upgraded or downgraded.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: clean up nfs4_preprocess_seqid_op

As long as we're here, do some miscellaneous cleanup.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: clarify close_lru handling

The handling of close_lru in preprocess_stateid_op was a source of some
confusion here recently.  Try to make the logic a little clearer, by renaming
find_openstateowner_id to make its purpose clearer and untangling some
unnecessarily complicated goto's.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: renew lease on seqid modifying operations

nfs4_preprocess_seqid_op is called by NFSv4 operations that imply an implicit
renewal of the client lease.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: return better error on io incompatible with open mode

from RFC 3530:
"Share reservations are established by OPEN operations and by their
nature are mandatory in that when the OPEN denies READ or WRITE
operations, that denial results in such operations being rejected
with error NFS4ERR_LOCKED."

(Note that share_denied is really only a legal error for OPEN.)

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: always update stateid on open

An OPEN from the same client/open stateowner requires a stateid update because
of the share/deny access update.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: relax new lock seqid check

We're insisting that the lock sequence id field passed in the
open_to_lockowner struct always be zero.  This is probably thanks to the
sentence in rfc3530: "The first request issued for any given lock_owner is
issued with a sequence number of zero."

But there doesn't seem to be any problem with allowing initial sequence
numbers other than zero.  And currently this is causing lock reclaims from the
Linux client to fail.

In the spirit of "be liberal in what you accept, conservative in what you
send", we'll relax the check (and patch the Linux client as well).

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: seqid comments

Add some comments on the use of so_seqid, in an attempt to avoid some of the
confusion outlined in the previous patch....

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: fix open_reclaim seqid

The sequence number we store in the sequence id is the last one we received
from the client.  So on the next operation we'll check that the client gives
us the next higher number.

We increment sequence id's at the last moment, in encode, so that we're sure
of knowing the right error return.  (The decision to increment the sequence id
depends on the exact error returned.)

However on the *first* use of a sequence number, if we set the sequence number
to the one received from the client and then let the increment happen on
encode, we'll be left with a sequence number one to high.

For that reason, ENCODE_SEQID_OP_TAIL only increments the sequence id on
*confirmed* stateowners.

This creates a problem for open reclaims, which are confirmed on first use.
Therefore the open reclaim code, as a special exception, *decrements* the
sequence id, cancelling out the undesired increment on encode.  But this
prevents the sequence id from ever being incremented in the case where
multiple reclaims are sent with the same openowner.  Yuch!

We could add another exception to the open reclaim code, decrementing the
sequence id only if this is the first use of the open owner.

But it's simpler by far to modify the meaning of the op_seqid field: instead
of representing the previous value sent by the client, we take op_seqid, after
encoding, to represent the *next* sequence id that we expect from the client.
This eliminates the need for special-case handling of the first use of a
stateowner.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: comment indentation

Yeah, it's trivial, but this drives me up the wall....

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: stop overusing RECLAIM_BAD

A misreading of the spec lead us to convert all errors on open and lock
reclaims to RECLAIM_BAD.  This causes problems--for example, a reboot within
the grace period could lead to reclaims with stale stateid's, and we'd like to
return STALE errors in those cases.

What rfc3530 actually says about RECLAIM_BAD: "The reclaim provided by the
client does not match any of the server's state consistency checks and is
bad." I'm assuming that "state consistency checks" refers to checks for
consistency with the state recorded to stable storage, and that the error
should be reserved for that case.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: ERR_GRACE should bump seqid on lock

A GRACE or NOGRACE response to a lock request should also bump the sequence
id.  So we delay the handling of grace period errors till after we've found
the relevant owner.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: ERR_GRACE should bump seqid on open

The GRACE and NOGRACE errors should bump the sequence id on open.  So we delay
the handling of these errors until nfsd4_process_open2, at which point we've
set the open owner, so the encode routine will be able to bump the sequence
id.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: fix release_lockowner

We oops in list_for_each_entry(), because release_stateowner frees something
on the list we're traversing.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: prevent multiple unlinks of recovery directories

Make sure we don't try to delete client recovery directories multiple times;
fixes some spurious error messages.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: lookup_one_len takes i_sem

Oops, this lookup_one_len needs the i_sem.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: fix sync'ing of recovery directory

We need to fsync the recovery directory after writing to it, but we weren't
doing this correctly.  (For example, we weren't taking the i_sem when calling
->fsync().)

Just reuse the existing nfsd fsync code instead.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd4: reboot recovery fix

We need to remove the recovery directory here too.  (This chunk just got lost
somehow in the process of commuting the reboot recovery patches past the other
patches.)

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] yenta: don't depend on CardBus

As a follow-up, we can allow the yenta-driver to be limited to PCMCIA
operation.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] yenta: no CardBus if IRQ fails

If probing for the correct interrupt fails on yenta bridges, the driver falls
back to polling for interrupt actions.  However, CardBus cards cannot be used
then.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: update MAINTAINERS entry

PCMCIA/CardBus is handled by a team of developers at the specified mailing
list.  Additional developers wanting to help are most welcome.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: remove references to pcmcia/version.h

As a follow-up, remove the inclusion of pcmcia/version.h in many files.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: remove client services version (fix)

One correction is needed.  Changes are not needed for
drivers/scsi/pcmcia/nsp_cs.c because it uses versioning in the
compatibility part, which is never used in 2.6 kernels.  The only right
thing we could to that compatibility code would be to remove it throughout
the file, but that would be a separate patch.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: remove client services version

The Linux PCMCIA code has some data that was apparently used (or meant to be
used) to ensure that only proper client drivers are loaded.  This is now
ensured (to a certain degree) by the fact that the most client drivers are
part of the kernel.  Also, the version information has not been updated
despite major changes in PCMCIA API.  This has made it meaningless.

This patch removes servinfo_t and pcmcia_get_card_services_info.  They are not
used in any userspace utilities such as pcmcia-cs and pcmciautils.
drivers/pcmcia/pcmcia_ioctl.c is adjusted accordingly.

CS_RELEASE and CS_RELEASE_CODE are removed.  include/pcmcia/version.h is empty
now.  It will be removed later, but for now it's left in the tree to avoid
touching all PCMCIA clients.

The only driver that needs to be changed is drivers/scsi/pcmcia/nsp_cs.c,
which uses CS_RELEASE_CODE.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: reduce client_handle_t usage

Reduce the occurences of "client_handle_t" which is nothing else than a
pointer to struct pcmcia_device by now.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: remove client_t usage

Reduce the occurences of "client_handle_t" which is nothing else than a
pointer to struct pcmcia_device by now.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: move event handler

Move the "event handler" to struct pcmcia_driver -- the unified event handler
will disappear really soon, but switching it to struct pcmcia_driver in the
meantime allows for better "step-by-step" patches.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: deprecate ioctl

Schedule removal of the PCMCIA ioctl (and thus kernel support for the
pcmcia-cs userspace package) for November 2005.

A big "thank you" to Dave Hinds for his great work on supporting PCMCIA in
Linux.  Things are just done differently by now, so the ongoing work to make
PCMCIA behave like any other hotpluggable bus should continue.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: fix i82365 request_region double usage

http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f354942cb301fed273f423fb5c4f57bde3efc5b2
converted the check_region() calls in drivers/pcmcia/i82365.c into
request_regions.  Unfortunately this seems to have broken things.

isa_probe() used to call check_region() and then call add_pcic() which would
request_region().

Now isa_probe() calls request_region() and then calls add_pcic() which calls
request_region() again, this fails and add_pcic() returns immediately without
doing all the setup etc.

On the face of it the patch below fixes the problem, by not doing the second
request region in add_pcic().  I think this is preferable to remove the call
in isa_probe() since identify() touches the I/O regions and is called before
add_pcic().

However I haven't fully grokked the meaning of the code which follows the
request_region() in isa_probe(), so I'm not sure that the handling WRT
multiple sockets and multiple bridge chips is correct.  In particular I'm not
convinced that the regions for subsequent sockets and/or bridges will be
requested at all.  I suspect a more thorough reworking by someone who
understands what is going on there might be in order.

I should mention that I'm actually messing about with this on an ARM platform
with wacky memory and i/o mapping offsets etc, it doesn't quite work yet for
other reasons which preclude full testing etc, but I think the problem above
is still present for more normal x86 stuff.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: LGDT3302 read status fix

- Fix bug in lgdt3302_read_status to return correct
  FE_HAS_SIGNAL and FS_HAS_CARRIER status.
- Removed #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10).

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: add DVB support for DViCO FusionHDTV3 Gold-T

- Correct sync byte for MPEG-2 transport stream packets.
- Add lgdt3302 as dependency of cx88-dvb in Kconfig.
- Add dvb support in v4l for DViCO FusionHDTV3 Gold-T using lgdt3302 frontend.
  This adds support for a different board from the previous (Gold-Q) patch.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: add TerraTec Cinergy 1400 DVB-T

Add support for TerraTec Cinergy 1400 DVB-T.

Signed-off-by: Uli Luckas <luckas@musoft.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: add DVB support for DViCO FusionHDTV3 Gold-Q

Add dvb support in v4l for DViCO FusionHDTV3 Gold-Q using lgdt3302 frontend.

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: cx88 hue offset fix

Changed hue offset to 128 to correct behavior in cx88 cards.  Previously,
setting 0% or 100% hue was required to avoid blue/green people on screen.
Now, 50% Hue means no offset, just like bt878 stuff.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: cx88 update

- Add support for ADS Tech Instant TV DVB-T PCI.
- Remove obsoleted config options.
- Fix DViCO Board names
- Remove CABLE type setting from DViCO FusionHDTV3 Gold-T.
- Fix compilation with gcc4.0.
- V4L2_TUNER_CAP_LOW implemented according with V4L2 API for Radio.
- radio range is now defined on tuner-core.c. Cleaning up.
- Fix a bug on frequency report for cx88 based cards.
- Added support for changing radio mode stereo/mono.
- Add remove for MSI TV@nywhere.

Signed-off-by: Jorik Jonker <jorik@dnd.utwente.nl>.
Signed-off-by: Didier Caillaud <mailing.cld@free.fr>
Signed-off-by: Benoit Laniel <benoit.laniel@gmail.com>.
Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix for Documentation/dvb/bt8xx.txt?=

*   /usr/src/linux-2.6.12/Documentation/dvb/bt8xx.txt

  almost completely remade the text file with the following focuses:
  useful infos for beginners: how to load modules manually and
  automatically developers infos are reduced to a minimum as module loading
  works automatic in kernel >= 2.6.12 by loading modules bttv and dvb-bt8xx
  I completely erased the out of date TwinHan part dealing with additional
  parameters, debug parameters, and overriding autodetection Further up to
  date information about TwinHan + clones can be found in
  /Documentation/dvb/ci.txt

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: README update

Updated the readme file to point to the DVB USB wikipage to find out which
firmware necessary, + minor updates.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: add supprt for WideView WT-220U

Add support and rewrote some parts with the help of vendor information
(Thanks to Steve Chang from WideView, Inc.):

o added support for the WT-220U (Pensize DVB-T receiver)
o corrected byte order for unc,ber and the pid filter
o corrected number of pids that can be fetched at the same time.
o added some comments in Kconfig-file
o added USB IDs for the WT-220U

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: fix tuning problem

Fix tuning failure for 200103A, 200103A failed to tune to low band due to
wrong tone setting on the 200103A.

Signed-off-by: Steffen Motzer <motzersn@tlink.de>
Signed-off-by: Manu Abraham <manu@kromtek.com>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb/pci: correct syntax of driver name fields

Change the name-field of the pci_driver and usb_driver structs to the name of
the module after compilation.  It seems that this field is used in some places
where special characters are not allowed.  Thanks to Alan Halverson for
finding this problem.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: frontend: add driver for LGDT3302

Add support for LGDT3302 (ATSC VSB/QAM) used in DViCO FusionHDTV3 Gold.

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: fix timeout handling to be save with PREEMPT

Timeout handling fixed, especially for preemtible kernels and/or high system
load.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: dont use HZ for timeouts

Don't use HZ for usb-transfer-timeouts.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: A800 rc and timeout fixes

o add some remote control codes
o not using HZ for control_msg-timeout

Signed-off-by: Andrew Hodgson <a.s.hodgson@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: IR input fixes

o fixed usage of the correct number of events in keymapping-array
o better place for return

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: vp7045 IR map fix

Correct two keys of the vp7045 remote control key mapping.

Signed-off-by: Michael Paxton <packo@tpg.com.au>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: fix WideView USB ids

o Steve Chang reported the real name behind 0x14aa: WideView,
  changed USB IDs accordingly.
o fixed an assignment

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: add vp7045 IR keymap

Add keymap for Twinhan vp7045 remote control.

Signed-off-by: Michael Paxton <packo@tpg.com.au>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb Kconfig help text update

o corrected some typos
o added the Wikilink pointing to the USB device list

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb doc update

o removed device listing (they are all in the linuxtv wiki now)
o misc updates

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: digitv memcpy fix

Fix memcpy copying into the wrong destination.  Thanks to Allan Third for
reporting.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: add VideoWalker DVB-T USB ids

Add another USB ID pair for the VideoWalker USB DVB-T.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: cxusb DVB-T fixes

cxusb DVB-T fixes.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: dvb_usb_properties init fix

There was no pid-filter-count set for some devices - led to an error.  Thanks
to Gerolf Wendland.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: digitv-usb fixes

Some more work on the digitv-usb driver:
o MT352 initialization and PLL-programming
o I2c-transfer fixed.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: frontend: add ALPS TDED4 PLL

Add dvb_pll_desc for ALPS TDED4 used in Nebula USB boxes.  Changed the
name-field of the FMD1216.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: add module parm to disable remote control polling

Add module parameter to deactive remote control polling.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box

Add preliminary support for the Medion Hybrid USB2.0 DVB-T/Analogue box.
Analogue part is not working yet (cx25842 --> ivtv?).

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: frontend: add FMD1216ME PLL

o change dvb-pll desc to take the frequency as parameter for setbw-callback
  into consideration
o added dvb-pll desc for Philips FMD1216ME (needed for cxusb)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: add isochronous streaming method

Added isochronous-streaming method.  Changed memory (de)allocation behaviour
accordingly.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: fix ADSTech Instant TV DVB-T USB2.0 support

Fixed support for the ADSTech Instant TV DVB-T USB (2.0 version).  Thanks to
Gerolf Wendland for his support.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dvb-usb: support Artect T1 with broken USB ids

Add #define for device with broken USB ids.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: add support for Hauppauge/TT DVB-C budget

Add support for Hauppauge/TT DVB-C budget.

Signed-off-by: Gavin Hamill <gdh@acentral.co.uk>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: kj printk fix

printk() calls should include appropriate KERN_* constant.

Signed-off-by: Christophe Lucas <clucas@rotomalug.org>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: make av7110_fe_lock_fix() retryable

av7110_fe_lock_fix() modified in a way that it can be retried after
-ERESTARTSYS

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: cleanup indentation + whitespace

Fix indentation and add some whitepsace between operators.

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: error handling fix

Change error handling in av7110_stop_feed() to stop as many filters as
possible in case of errors.

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: more error handling for firmware communication

o propagate more errors back to caller or log them, mainly in
  av7110.c and av7110_av.c
o fix error message in StartHWFilter
o do not StopHWFilter for handle 0xffff

Signed-off-by: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: budget-av / tu1216 fix for QAM128

Fix for QAM128 in VHF band suggested by Timo Helkiö.

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: fix AUDUIO_CONTINUE ioctl

Fixed typo in AUDUIO_CONTINUE ioctl:  AUDIO_CMD_MUTE -> AUDIO_CMD_UNMUTE

Signed-off-by: "Dr. Werner Fink" <werner@suse.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: fix bug in timeout handling

Fix bug in timeout handling.

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: fix error handling for firmware communication

o make sure ERESTARTSYS will be propagated
o ReleaseBitmap: starting with Firmware 261e, also release when
  BMP_LOADING
o removes unused #define BMP_LOADINGS
o in many cases changed the return value from -1 to something more
  meaningful like ETIMEDOUT, EINVAL
o changed syslog message timeout waiting for COMMAND such that it
  indicates what command did not complete
o reduce # of arguments for LoadBitmap and BlitBitmap
o av7110_osd_cmd: remove the out: label

Signed-off-by: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: support for new TT DVB-T-CI

Support for new TT DVB-T-CI, thanks to Andre Weidemann

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: add support for Technotrend/Hauppauge DVB-S SE

Add support for s5h1420 frontend (new Technotrend/Hauppauge DVB-S SE).

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttusb-dec: kfree cleanup

The Coverity checker discovered that these two kfree's can never be executed.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: Twinhan DST: frontend polarization fix

Fix a bug that caused the polarization (V/H) to be interchanged.

Signed-off-by: Allan Stirling <Dibblahdvb0042@pendor.org>
Signed-off-by: Manu Abraham <manu@kromtek.com>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: Twinhan DST: frontend fixes

o Make the inversion setting specific, ie, only for the 200103A DVB-S
  This should not be flagged on other cards.
o Make the frequency setting card specific
o Make the bandwidth setting generic such that it supports more DVB-T cards
o Set QAM size for DVB-C cards that do not autodetect QAM size
o Fix a bug that caused the polarization not to be set.
  Set polarization for cards that do not autodetect polarization
o Fix a bogus frontend signal lock, that caused a tuning delay as well.
o Make the Symbolrate setting card specific

Signed-off-by: Manu Abraham <manu@kromtek.com>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: woraround irq stop problem

The flexcop chip often stops generating interrupts after some hours of
operation.  Apparently this can be fixed by resetting register block 0x300 at
each channel change (this is not detailed in the flexcop data books).

This patch also restructures DMA handling and adds a bit of debug code for the
irq problem in case it still happens for someone.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: add big endian register definitions

Add big-endian register definitions for running on a PowerPC.
(Thanks to Paavo Hartikainen for testing.)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: saa7146: kj pci_module_init cleanup

http://kerneljanitors.org/TODO
- convert from pci_module_init to pci_register_driver

Signed-off-by: Christophe Lucas <c.lucas@ifrance.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: add Pluto2 driver

Add driver for the Satelco Easywatch Mobile DVB-T card (based on Pluto2 chip).

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DVB update

Increase some timeouts by a factor of 10 as suggested by Mikko Hamalainen and
Timo Ketolainen, to improve tuning for QAM128 / weak signal.

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>