linux-2.6
18 years ago[PATCH] USB: USB authentication states
David Brownell [Fri, 20 Jan 2006 22:44:12 +0000 (14:44 -0800)] 
[PATCH] USB: USB authentication states

Another hook needed for wireless USB:  there are states associated with the
device authentication protocol.  Wireless devices must authenticate using
the host system's keystore.

Note that wired connections could also use this authentication protocol, if
for no other reason than to support the most secure "simple" key exchange
protocols for wireless devices.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: yealink printk warning fix
Andrew Morton [Fri, 20 Jan 2006 07:59:12 +0000 (23:59 -0800)] 
[PATCH] USB: yealink printk warning fix

drivers/usb/input/yealink.c: In function `usb_probe':
drivers/usb/input/yealink.c:910: warning: int format, different type arg (arg 4)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: libusual: fix warning on 64bit boxes
Alan Cox [Tue, 17 Jan 2006 23:39:25 +0000 (15:39 -0800)] 
[PATCH] USB: libusual: fix warning on 64bit boxes

We cast an int to a void * which not unreasonably makes gcc suspicious.
We don't actually care what type "type" is so use unsigned long so it
matches pointer length on all platforms.

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: arm26: fix compilation of drivers/usb/core/message.c
Alexey Dobriyan [Wed, 18 Jan 2006 21:06:07 +0000 (00:06 +0300)] 
[PATCH] USB: arm26: fix compilation of drivers/usb/core/message.c

drivers/usb/core/message.c:395: error: invalid use of undefined type `struct scatterlist'

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Au1xx0: replace casual readl() with au_readl() in the drivers
Sergei Shtylylov [Fri, 6 Jan 2006 06:50:39 +0000 (22:50 -0800)] 
[PATCH] USB: Au1xx0: replace casual readl() with au_readl() in the drivers

au_readl() does needed byteswapping, etc.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: remove extra newline in hid_init_reports
Olaf Hering [Fri, 6 Jan 2006 11:45:28 +0000 (12:45 +0100)] 
[PATCH] USB: remove extra newline in hid_init_reports

The warn() macro in include/linux/usb.h adds a newline.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: drivers/usb/media/ov511.c: remove hooks for the decomp module
Adrian Bunk [Fri, 6 Jan 2006 02:28:52 +0000 (03:28 +0100)] 
[PATCH] USB: drivers/usb/media/ov511.c: remove hooks for the decomp module

- the decomp module is not intended for inclusion into the kernel
- people using the decomp module from upstream will usually simply use
  the complete upstream 2.xx driver

Therefore, there seems to be no good reason spending some bytes of
kernel memory for hooks for this module.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark McClelland <mark@ovcam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: drivers/usb/media/w9968cf.c: remove hooks for the vpp module
Adrian Bunk [Sun, 8 Jan 2006 23:43:39 +0000 (00:43 +0100)] 
[PATCH] USB: drivers/usb/media/w9968cf.c: remove hooks for the vpp module

- the w9968cf-vpp module is not intended for inclusion into the kernel
- the upstream w9968cf package shipping the w9968cf-vpp module suggests
  to simply replace the w9968cf module shipped with the kernel

Therefore, there seems to be no good reason spending some bytes of
kernel memory for hooks for the w9968cf-vpp module.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB EHCI: fix gfp_t sparse warning
Randy Dunlap [Mon, 26 Dec 2005 03:27:18 +0000 (19:27 -0800)] 
[PATCH] USB EHCI: fix gfp_t sparse warning

Fix sparse warning:
drivers/usb/host/ehci-hcd.c:719:35: warning: incorrect type in argument 3 (different base types)
drivers/usb/host/ehci-hcd.c:719:35:    expected unsigned int [unsigned] mem_flags
drivers/usb/host/ehci-hcd.c:719:35:    got restricted unsigned int [usertype] mem_flags

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Remove LINUX_VERSION_CODE check in pwc/pwc-ctrl.c
Eric Sesterhenn / snakebyte [Wed, 4 Jan 2006 17:10:44 +0000 (18:10 +0100)] 
[PATCH] USB: Remove LINUX_VERSION_CODE check in pwc/pwc-ctrl.c

this patch removes compatibility with 2.4 kernel, which makes
the code much easier to read.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: gadgetfs: set "zero" flag for short control-IN response
Alan Stern [Tue, 3 Jan 2006 15:30:31 +0000 (10:30 -0500)] 
[PATCH] USB: gadgetfs: set "zero" flag for short control-IN response

This patch (as622) makes gadgetfs set the "zero" flag for control-IN
responses, when the length of the response is shorter than the length of
the request.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: isp116x-hcd: replace mdelay() by msleep()
Olav Kongas [Tue, 27 Dec 2005 14:04:02 +0000 (16:04 +0200)] 
[PATCH] USB: isp116x-hcd: replace mdelay() by msleep()

Replace mdelay() by msleep() in bus_suspend(); the rest of the system will
gain 7ms. The related code is reorganized to minimize the number of
locking/unlocking calls.

The last hunk of the patch is the formatting change by Lindent.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: add might_sleep() to usb_unlink_urb() to warn developers
Greg Kroah-Hartman [Mon, 23 Jan 2006 22:17:21 +0000 (17:17 -0500)] 
[PATCH] USB: add might_sleep() to usb_unlink_urb() to warn developers

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: net2280 warning fix
David Brownell [Thu, 19 Jan 2006 07:55:08 +0000 (23:55 -0800)] 
[PATCH] USB: net2280 warning fix

For some reason alpha doesn't include <linux/dma-mapping.h> where other
architectures do; this makes net2280 include it explicitly.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: remove some left over devfs droppings hanging around in the usb drivers
Greg Kroah-Hartman [Wed, 18 Jan 2006 22:36:58 +0000 (17:36 -0500)] 
[PATCH] USB: remove some left over devfs droppings hanging around in the usb drivers

As there is no more usb devfs support, these bits would just confuse
people.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: UHCI: No FSBR until device is configured
Alan Stern [Mon, 23 Jan 2006 22:17:21 +0000 (17:17 -0500)] 
[PATCH] USB: UHCI: No FSBR until device is configured

Some USB devices don't enumerate well with FSBR turned on.  This patch
keeps devices on the low-speed part of the schedule (which doesn't use
FSBR) until they have been fully configured.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: EHCI, another full speed iso fix
Clemens Ladisch [Sun, 22 Jan 2006 18:32:49 +0000 (10:32 -0800)] 
[PATCH] USB: EHCI, another full speed iso fix

This patch adds a reinitializion for the uf variable that got modified
by the preceding start-split bandwidth check.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB HID: add blacklist entry for HP keyboard
Vojtech Pavlik [Thu, 26 Jan 2006 06:44:31 +0000 (07:44 +0100)] 
[PATCH] USB HID: add blacklist entry for HP keyboard

My earlier experiment (adding a clear-halt for the interrupt-in
endpoint)  failed.  It turns out that it does cause problems for other
devices.  And it wasn't needed anyway; a simple blacklist entry was
enough to get my HP keyboard working.

This patch (as643) removes the clear-halt call and adds the blacklist
entry.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: add new auerswald device ids
Andrew Morton [Tue, 17 Jan 2006 23:37:22 +0000 (15:37 -0800)] 
[PATCH] USB: add new auerswald device ids

Add device support for a couple more Auerswald TK-devices.

Via Thomas Jackle <dj-tj@gmx.de>, typed in from
http://bugzilla.kernel.org/show_bug.cgi?id=5908.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] UEAGLE : cmv name bug (was cosmetic)
matthieu castet [Wed, 18 Jan 2006 06:39:27 +0000 (07:39 +0100)] 
[PATCH] UEAGLE : cmv name bug (was cosmetic)

this patch correct a possible bug with cmv_name being static. If there
is 2 modems and the driver is scheduled when filling cmv_name this could
result with garbage in cmv_name. We allocate cmv_name on the stack but
with a small size in order to avoid that.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] UEAGLE : cosmetic
matthieu castet [Wed, 18 Jan 2006 06:38:37 +0000 (07:38 +0100)] 
[PATCH] UEAGLE : cosmetic

this patch is purely cosmetic. There is :
- indentation cleaning
- unneeded cast removing
- comments cleaning

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] UEAGLE : add iso support
matthieu castet [Wed, 18 Jan 2006 06:38:19 +0000 (07:38 +0100)] 
[PATCH] UEAGLE : add iso support

This patch adds the support for isochronous pipe.

A new module parameter is added to select iso mode.  It is set to iso by
default because bulk mode doesn't work well at high speed rate (>3 Mbps
for upload).

We use UDSL_IGNORE_EILSEQ flags because ADI firmware doesn't reply to
ISO IN when it has nothing to send [1].

[1]
from cypress datasheet :

The ISOSEND0 Bit (bit 7 in the USBPAIR Register) is used when the EZ-USB
FX chip receives an isochronous IN token while the IN FIFO is empty. If
ISOSEND0=0 (the default value), the USB core does not respond to the IN
token. If ISOSEND0=1, the USB core sends a zero-length data packet in
response to the IN token. The action to take depends on the overall
system design. The ISOSEND0 Bit applies to all of the isochronous IN
endpoints, IN-8 through IN-15.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: semaphore to mutex conversion
Arjan van de Ven [Fri, 13 Jan 2006 14:52:55 +0000 (15:52 +0100)] 
[PATCH] USBATM: semaphore to mutex conversion

This is the usbatm part of the Arjan, Jes and Ingo
mass semaphore to mutex conversion, reworked to apply on top
of the patches I just sent to you.  This time, with correct
attribution and signed-off lines.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: -EILSEQ workaround
Duncan Sands [Fri, 13 Jan 2006 10:12:58 +0000 (11:12 +0100)] 
[PATCH] USBATM: -EILSEQ workaround

Don't throttle on -EILSEQ urb status if requested by a minidriver.
It seems the ueagle modems are buggy, giving -EILSEQ when they
have no data to send.  The ueagle change will be sent separately
by the ueagle guys.  Patch by Matthieu Castet.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: bump version numbers
Duncan Sands [Fri, 13 Jan 2006 10:08:05 +0000 (11:08 +0100)] 
[PATCH] USBATM: bump version numbers

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: handle urbs containing partial cells
Duncan Sands [Fri, 13 Jan 2006 10:06:46 +0000 (11:06 +0100)] 
[PATCH] USBATM: handle urbs containing partial cells

The receive logic has always assumed that urbs contain an integral
number of ATM cells, which is a bit naughty, though it never caused
any problems with bulk transfers.  Isochronous urbs spank us soundly
for this.  Fixed thanks to this patch, mostly by Stanislaw Gruszka.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: allow isochronous transfer
Duncan Sands [Fri, 13 Jan 2006 09:59:23 +0000 (10:59 +0100)] 
[PATCH] USBATM: allow isochronous transfer

While the usbatm core has had some support for using isoc urbs
for some time, there was no way for users to turn it on.  While
use of isoc transfer should still be considered experimental, it
now works well enough to let users turn it on.  Minidrivers signal
to the core that they want to use isoc transfer by setting the new
UDSL_USE_ISOC flag.  The speedtch minidriver gets a new module
parameter enable_isoc (defaults to false), plus some logic that
checks for the existence of an isoc receive endpoint (not all
speedtouch modems have one).

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: measure buffer size in bytes; force valid sizes
Duncan Sands [Fri, 13 Jan 2006 09:52:38 +0000 (10:52 +0100)] 
[PATCH] USBATM: measure buffer size in bytes; force valid sizes

Change the module parameters rcv_buf_size and snd_buf_size to
specify buffer sizes in bytes rather than ATM cells.  Since
there is some danger that users may not notice this change,
the parameters are renamed to rcv_buf_bytes etc.  The transmit
buffer needs to be a multiple of the ATM cell size in length,
while the receive buffer should be a multiple of the endpoint
maxpacket size (this wasn't enforced before, which causes trouble
with isochronous transfers), so enforce these restrictions.  Now
that the usbatm probe method inspects the endpoint maxpacket size,
minidriver bind routines need to set the correct alternate setting
for the interface in their bind routine.  This is the reason for
the speedtch changes.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: use dev_kfree_skb_any rather than dev_kfree_skb
Duncan Sands [Fri, 13 Jan 2006 09:13:19 +0000 (10:13 +0100)] 
[PATCH] USBATM: use dev_kfree_skb_any rather than dev_kfree_skb

In one spot (usbatm_cancel_send) we were calling dev_kfree_skb with irqs
disabled.  This mistake is just too easy to make, so systematically use
dev_kfree_skb_any rather than dev_kfree_skb.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: return correct error code when out of memory
Duncan Sands [Fri, 13 Jan 2006 09:07:08 +0000 (10:07 +0100)] 
[PATCH] USBATM: return correct error code when out of memory

We weren't always returning -ENOMEM.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: shutdown open connections when disconnected
Duncan Sands [Fri, 13 Jan 2006 09:05:15 +0000 (10:05 +0100)] 
[PATCH] USBATM: shutdown open connections when disconnected

This patch causes vcc_release_async to be applied to any open
vcc's when the modem is disconnected.  This signals a socket
shutdown, letting the socket user know that the game is up.
I wrote this patch because of reports that pppd would keep
connections open forever when the modem is disconnected.
This patch does not fix that problem, but it's a step in the
right direction.  It doesn't help because the pppoatm module
doesn't yet monitor state changes on the ATM socket, so simply
never realises that the ATM connection has gone down (meaning
it doesn't tell the ppp layer).  But at least there is a socket
state change now.  Unfortunately this patch may create problems
for those rare users like me who use routed IP or some other
non-ppp connection method that goes via the ATM ARP daemon: the
daemon is buggy, and with this patch will crash when the modem
is disconnected.  Users with a buggy atmarpd can simply restart
it after disconnecting the modem.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: xusbatm rewrite
Duncan Sands [Fri, 13 Jan 2006 08:48:36 +0000 (09:48 +0100)] 
[PATCH] USBATM: xusbatm rewrite

The xusbatm driver is for otherwise unsupported modems.
All it does is grab hold of a user-specified set of
interfaces - the generic usbatm core methods (hopefully)
do the rest.  As Aurelio Arroyo discovered when he tried
to use xusbatm (big mistake!), the interface grabbing logic
was completely borked.  Here is a rewrite that works.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: kzalloc conversion
Duncan Sands [Fri, 13 Jan 2006 08:38:22 +0000 (09:38 +0100)] 
[PATCH] USBATM: kzalloc conversion

Convert kmalloc + memset to kzalloc.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: remove .owner
Duncan Sands [Fri, 13 Jan 2006 08:36:20 +0000 (09:36 +0100)] 
[PATCH] USBATM: remove .owner

Remove the unused .owner field in struct usbatm_driver.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: add flags field
Duncan Sands [Tue, 17 Jan 2006 10:16:13 +0000 (11:16 +0100)] 
[PATCH] USBATM: add flags field

Have minidrivers and the core signal special requirements
using a flags field in struct usbatm_data.  For the moment
this is only used to replace the need_heavy_init bind
parameter, but there'll be new flags in later patches.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USBATM: trivial modifications
Duncan Sands [Tue, 17 Jan 2006 10:15:13 +0000 (11:15 +0100)] 
[PATCH] USBATM: trivial modifications

Formatting, changes to variable names, comments, log level changes,
printk rate limiting.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Add ET61X[12]51 Video4Linux2 driver
Luca Risolia [Wed, 11 Jan 2006 02:06:59 +0000 (02:06 +0000)] 
[PATCH] USB: Add ET61X[12]51 Video4Linux2 driver

This patch adds a Video4Linux2 driver giving support
to ET61X151 and ET61X251 PC Camera Controllers made by
Etoms Electronics.

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: SN9C10x driver updates
Luca Risolia [Fri, 13 Jan 2006 17:19:43 +0000 (17:19 +0000)] 
[PATCH] USB: SN9C10x driver updates

SN9C10x driver updates:

- Use kzalloc() instead of kmalloc()
- Move some macro definitions from sn9c102.h to sn9c102_core.c
- Use vfree() and vmalloc_32() instead of rvfree() and rvmalloc()
- Fix mmap() sys call
- Documentation updates

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: cp2101 Add new device IDs
Craig Shelley [Fri, 20 Jan 2006 00:06:19 +0000 (00:06 +0000)] 
[PATCH] USB: cp2101 Add new device IDs

The attached patch adds four new device IDs for the CP2101 driver.
Also 3 tab characters have been removed from device ID table.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: add new pl2303 device ids
Denis MONTERRAT [Thu, 19 Jan 2006 13:52:38 +0000 (14:52 +0100)] 
[PATCH] USB: add new pl2303 device ids

Signed-off-by: FALIPOU F Developer <fred.falipou@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: pl2303: Added support for CA-42 clone cable
Martin Gingras [Mon, 9 Jan 2006 17:35:41 +0000 (12:35 -0500)] 
[PATCH] USB: pl2303: Added support for CA-42 clone cable

Added support for CA-42 clone cable (www.ca-42.com)

Signed-off-by: Martin Gingras <martin.gingras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: touchkitusb.c (eGalax driver) fix
Juergen Schindele [Mon, 9 Jan 2006 07:51:48 +0000 (08:51 +0100)] 
[PATCH] USB: touchkitusb.c (eGalax driver) fix

This patch corrects the URB initialisation for transfers
like this is done in other drivers too.
Without this patch no data was transmitted on a PXA270 OHCI
platform. May apply to others too.

Signed-off-by: Juergen Schindele <schindele@nentec.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: asix - Add device IDs for 0G0 Cable Ethernet
David Hollis [Thu, 5 Jan 2006 19:39:49 +0000 (14:39 -0500)] 
[PATCH] USB: asix - Add device IDs for 0G0 Cable Ethernet

Add device IDs for the 0G0 Cable Ethernet device as reported by
Charles Lepple <clepple@gmail.com>.

Signed-off-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: SN9C10x driver updates and bugfixes
Luca Risolia [Thu, 5 Jan 2006 18:14:04 +0000 (18:14 +0000)] 
[PATCH] USB: SN9C10x driver updates and bugfixes

SN9C10x driver updates and bugfixes.

Changes: + new, - removed, * cleanup, @ bugfix:

@ fix poll()
@ Remove bad get_ctrl()'s
* Reduce ioctl stack usage
* Remove final ";" from some macro definitions
* Better support for SN9C103
+ Add sn9c102_write_regs()
+ Add 0x0c45/0x602d to the list of SN9C10x based devices
+ Add support for OV7630 image sensors
+ Provide support for the built-in microphone interface of the SN9C103
+ Documentation updates
+ Add 0x0c45/0x602e to the list of SN9C10x based devices

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: usb-storage support for SONY DSC-T5 still camera
Alexandre Duret-Lutz [Tue, 27 Dec 2005 07:04:24 +0000 (23:04 -0800)] 
[PATCH] USB: usb-storage support for SONY DSC-T5 still camera

I've been offered a nice Sony DSC-T5 digital camera, with a USB connection.
Unfortunately it is not recognized by Linux 2.6.14.4's usb-storage.

With the following change I'm able to mount and read my pictures:

Signed-off-by: Phil Dibowitz <phil@ipom.com>
18 years ago[PATCH] USB: fix oops in acm disconnect
Oliver Neukum [Sun, 8 Jan 2006 11:39:13 +0000 (12:39 +0100)] 
[PATCH] USB: fix oops in acm disconnect

this fixes an oops with disconnection in acm.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: cleanup of usblp
Oliver Neukum [Sat, 7 Jan 2006 20:35:20 +0000 (21:35 +0100)] 
[PATCH] USB: cleanup of usblp

this fixes
-potential hang by disconnecting through usbfs
-kzalloc
-general cleanup
-micro optimisation in interrupt handlers

It compiles and I am printing.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: usb-storage: Add support for Rio Karma
Matthew Dharm [Sat, 31 Dec 2005 03:06:53 +0000 (19:06 -0800)] 
[PATCH] USB: usb-storage: Add support for Rio Karma

This patch from Bob Copeland adds support for the Rio Karma portable
digital audio player to the usb-storage driver.  The only thing needed to
support this device is a one-time (per plugin) init command which is sent
to the device.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] drivers/usb/input/yealink.c: Cleanup device matching code
Henk [Fri, 30 Dec 2005 18:41:11 +0000 (19:41 +0100)] 
[PATCH] drivers/usb/input/yealink.c: Cleanup device matching code

This should fix things mentioned below:

"I was curious why my firewall was loading a 'phone driver'.
It turns out that the probing in the yealink driver is
a little too assuming..

static struct usb_device_id usb_table [] = {
    { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
    { }
};

So it picked up my UPS, and loaded the driver.
Whilst no harm came, because it later checks the vendor/product IDs,
this driver should probably be rewritten to only probe
for the device IDs it actually knows about.

Dave"

Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras
Rui Santos [Mon, 9 Jan 2006 13:12:40 +0000 (13:12 +0000)] 
[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras

Documentation: Specify grayscale specification on ATIK-ATK16
   and ATIK-ATK16HR comments.
New: Add ProductID and VendorID for devices ATIK-ATK16C and
   ATIK-ATK16HRC. These devices are also USB Astronomical CCD
   cameras that work through an FTDI 245BM chip, share the
   same base hardware but, it has a colour CCD chip instead
   of a grayscale one.

Signed-off-by: Rui Santos <rsantos@grupopie.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2
Wouter Paesen [Tue, 3 Jan 2006 13:30:31 +0000 (14:30 +0100)] 
[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2

The attached patch adds a new PID for the ftdi_sio driver.  It will
enable support for PC-DJ's DAC-2 controller module
(more information on http://www.pcdjhardware.com/DAC2.asp)

Signed-off-by: Wouter Paesen <wouter@kangaroot.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ftdi_sio: new IDs for Westrex devices
Ian Abbott [Mon, 9 Jan 2006 17:11:40 +0000 (17:11 +0000)] 
[PATCH] USB: ftdi_sio: new IDs for Westrex devices

This patch adds two new devices to the ftdi_sio driver's device ID
table.  The device IDs were supplied by Cory Lee to support two POS
printers made by Westrex International (Model 777 and Model 8900F).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.h
Louis Nyffenegger [Thu, 5 Jan 2006 16:20:37 +0000 (17:20 +0100)] 
[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.h

this patch includes the Vendor Id for a optic fiber to USB device named
TTUSB from thought Technology. It's just add the vendor Id to
ftdi_sio.h and add the Vendor ID and model Id to table_combined.

Signed-off-by: Louis Nyffenegger <louis.nyffenegger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ub 05 Bulk reset
Pete Zaitcev [Thu, 5 Jan 2006 08:26:30 +0000 (00:26 -0800)] 
[PATCH] USB: ub 05 Bulk reset

For crying out loud, they have devices which do not like port resets.
So, do what usb-storage does and try both bulk and port resets.
We start with a port reset (which usb-storage does at the end of transport),
then do a Bulk reset, then a port reset again. This seems to work for me.

The code is getting dirtier and dirtier here, but I swear that I'll
do something about it (see those two new XXX). Honest.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ub 04 Loss of timer and a hang
Pete Zaitcev [Thu, 5 Jan 2006 08:14:02 +0000 (00:14 -0800)] 
[PATCH] USB: ub 04 Loss of timer and a hang

If SCSI commands are submitted while other commands are still processed,
the dispatch loop turns, and we stop the work_timer. Then, if URB fails
to complete, ub hangs until the device is unplugged.

This does not happen often, becase we only allow one SCSI command per
block device, but does happen (on multi-LUN devices, for example).

The fix is to stop timer only when we actually going to change the state.

The nicest code would be to have the timer stopped in URB callback, but
this is impossible, because it can be called from inside a timer, through
the urb_unlink. Then we get BUG in timer.c:cascade(). So, we do it a
little dirtier.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ub 03 Oops with CFQ
Pete Zaitcev [Wed, 28 Dec 2005 22:22:17 +0000 (14:22 -0800)] 
[PATCH] USB: ub 03 Oops with CFQ

The blk_cleanup_queue does not necesserily destroy the queue. When we
destroy the corresponding ub_dev, it may leave the queue spinlock pointer
dangling.

This patch moves spinlocks from ub_dev to static memory. The locking
scheme is not changed. These spinlocks are still separate from the ub_lock.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: fix ehci early handoff issues warning
Andrew Morton [Wed, 25 Jan 2006 01:42:24 +0000 (17:42 -0800)] 
[PATCH] USB: fix ehci early handoff issues warning

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: fix EHCI early handoff issues
David Brownell [Tue, 24 Jan 2006 15:15:30 +0000 (07:15 -0800)] 
[PATCH] USB: fix EHCI early handoff issues

This moves the previously widely-used ehci-pci.c BIOS handoff
code into the pci-quirks.c file, replacing the less widely used
"early handoff" version that seems to cause problems lately.

One notable change:  the "early handoff" version always enabled
an SMI IRQ ... and did so even if the pre-Linux code said it was
not using EHCI (and not expecting EHCI SMIs).  Looks like a goof
in a workaround for some unknown BIOS version.

This merged version only forcibly enables those IRQs when pre-Linux
code says it's using EHCI.  And now it always forces them off "just
in case".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] "Fix uidhash_lock <-> RXU deadlock" fix
Andrew Morton [Wed, 1 Feb 2006 00:34:26 +0000 (16:34 -0800)] 
[PATCH] "Fix uidhash_lock <-> RXU deadlock" fix

I get storms of warnings from local_bh_enable().  Better-tested patches,
please.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/x86
Linus Torvalds [Wed, 1 Feb 2006 00:21:44 +0000 (16:21 -0800)] 
Merge /pub/scm/linux/kernel/git/davej/x86

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Wed, 1 Feb 2006 00:20:55 +0000 (16:20 -0800)] 
Merge /pub/scm/linux/kernel/git/davej/agpgart

18 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Tue, 31 Jan 2006 23:22:29 +0000 (15:22 -0800)] 
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Tue, 31 Jan 2006 23:09:20 +0000 (15:09 -0800)] 
Merge /pub/scm/linux/kernel/git/davej/cpufreq

18 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Tue, 31 Jan 2006 22:14:02 +0000 (14:14 -0800)] 
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Tue, 31 Jan 2006 21:12:41 +0000 (13:12 -0800)] 
Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6

18 years agoFix ipv4/igmp.c compile with gcc-4 and IP_MULTICAST
Linus Torvalds [Tue, 31 Jan 2006 21:11:41 +0000 (13:11 -0800)] 
Fix ipv4/igmp.c compile with gcc-4 and IP_MULTICAST

Modern versions of gcc do not like case statements at the end of a block
statement: you need at least an empty statement.  Using just a "break;"
is preferred for visual style.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[SCSI] ServeRAID: prevent seeing DADSI devices
Jack Hammer [Tue, 31 Jan 2006 18:17:55 +0000 (13:17 -0500)] 
[SCSI] ServeRAID: prevent seeing DADSI devices

A critical thing the ServeRAID driver MUST do is hide the physical DASDI
devices from the OS. It does this by intercepting the INQUIRY commands.

In recent 2.6.15 testing, I discovered this to be failing.

The cause was the driver assuming that the INQUIRY response data was in a
simple single buffer, when it was actually a 1 element scatter gather list.

This patch makes ips always look at the correct data when examining an
INQUIRY response.

Signed-off-by: Jack Hammer <jack_hammer@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: add message sanity check
Moore, Eric [Wed, 18 Jan 2006 00:06:29 +0000 (17:06 -0700)] 
[SCSI] fusion: add message sanity check

This adds a sanity check in the interrupt routine
insures incoming message frames are a valid
message frames.

The code for setting 0xdeadbeaf in the freed message
frames, apparently was already submitted by Christoph
in previous patch submission.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: unloading the driver - only set asyn narrow for configured devices
Moore, Eric [Wed, 18 Jan 2006 00:06:26 +0000 (17:06 -0700)] 
[SCSI] fusion: unloading the driver - only set asyn narrow for configured devices

This patch inhibits sending spi negotiation parameters
for non-configured devices from the slave_destroy function.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: unloading the driver results in panic - fix
Moore, Eric [Wed, 18 Jan 2006 00:06:23 +0000 (17:06 -0700)] 
[SCSI] fusion: unloading the driver results in panic - fix

The ioc->alt_ioc->alt_ioc pointer is not getting cleared
during driver unload time.   This dangling pointer
can result in panic in certain circumstances, such
as error recovery, or firmware download in flashless
environments. This only impacts dual functions controllers,
such as 1030. Please apply.

This patch also includes a small cosmetic name change
for mpt_spi_log_info.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] mptsas: don't complain on bogus slave_alloc calls
Christoph Hellwig [Mon, 30 Jan 2006 18:00:43 +0000 (19:00 +0100)] 
[SCSI] mptsas: don't complain on bogus slave_alloc calls

When people use the userspace scanning facilities on SAS hardware the
LLDD gets bogus slave_alloc calls.  Just fail those gracefully instead
of printing a warning in mptsas and another one in the midlayer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: add task managment response code info
Moore, Eric [Tue, 17 Jan 2006 01:53:26 +0000 (18:53 -0700)] 
[SCSI] fusion: add task managment response code info

Adding verbose message returned from firmware
when a task mangment request fails.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: add MSI support
Christoph Hellwig [Tue, 17 Jan 2006 13:44:29 +0000 (13:44 +0000)] 
[SCSI] fusion: add MSI support

On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote:
> Adding MSI support, and command line for enabling
> it.  By default, the command line option has MSI disabled.

mpt_msi_enable is initialized to 0 implicitly, no need to do that.  Also
replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable).

Updated patch below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: overrun tape fix
Moore, Eric [Tue, 17 Jan 2006 01:53:21 +0000 (18:53 -0700)] 
[SCSI] fusion: overrun tape fix

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: add verbose messages for RAID actions
Moore, Eric [Tue, 17 Jan 2006 01:53:19 +0000 (18:53 -0700)] 
[SCSI] fusion: add verbose messages for RAID actions

A customer request to send raid asyn actions
from firmware to the event syslog.  This shows
when raid volumes go degraded, or complete resync,
or volumes created/deleted, etc.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes
Moore, Eric [Tue, 17 Jan 2006 01:53:16 +0000 (18:53 -0700)] 
[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes

Increasing the reply frame size by 16 bytes, to
be in sync with the other fusion drivers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spi
Christoph Hellwig [Tue, 17 Jan 2006 13:43:14 +0000 (13:43 +0000)] 
[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spi

On Mon, Jan 16, 2006 at 06:53:13PM -0700, Moore, Eric wrote:
> The task managment request timeout in the eh threads was set
> for U320 timing, which is between 2-5 seconds.
> This is too small for FC and SAS.
> According to the firmware engineers, Fibre needs to be 40 seconds
> and SAS needs to be 10 seconds.

The timeout selection should probably be done in a little helper instead
of duplicated in a few places.  Updated patch below.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: mptsas, increase discovery timout to 300 seconds
Moore, Eric [Tue, 17 Jan 2006 01:53:11 +0000 (18:53 -0700)] 
[SCSI] fusion: mptsas, increase discovery timout to 300 seconds

Increase the port enable timeout only for SAS from 30 to 300 seconds.
A customer request for the handling large topologies.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: spi bus reset when driver loads
Moore, Eric [Tue, 17 Jan 2006 01:53:06 +0000 (18:53 -0700)] 
[SCSI] fusion: spi bus reset when driver loads

This patch is for spi.  This issues bus reset when driver
loads. Handling cases when initator has negotiated for packetized,
and target negotiated for non-packetized; effectly this bus reset
is getting both target and initiator on the same sheet of music.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] aic79xx: Fix timer handling
Hannes Reinecke [Mon, 30 Jan 2006 15:10:31 +0000 (16:10 +0100)] 
[SCSI] aic79xx: Fix timer handling

Fix the timer handling in aic79xx to use the SCSI-ML provided handling
instead of implementing our own.
It also fixes a deadlock in the command recovery code.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] aic7xxx: update documentation
Hannes Reinecke [Tue, 24 Jan 2006 09:45:35 +0000 (10:45 +0100)] 
[SCSI] aic7xxx: update documentation

This patch updates the documentation for aic7xxx and aic79xx with fixes
from the adaptec driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] aic79xx: SLOWCRC fix
Hannes Reinecke [Tue, 24 Jan 2006 09:44:38 +0000 (10:44 +0100)] 
[SCSI] aic79xx: SLOWCRC fix

This patch introduces the SLOWCRC handling for certain buggy chipsets.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] aic79xx: sequencer fixes
Hannes Reinecke [Tue, 24 Jan 2006 09:43:26 +0000 (10:43 +0100)] 
[SCSI] aic79xx: sequencer fixes

This patch updates the aic79xx sequencer with latest fixes from adaptec.
The sequencer code now corresponds with adaptec version 2.0.15.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] aic7xxx: Update aicasm
Hannes Reinecke [Tue, 24 Jan 2006 09:41:45 +0000 (10:41 +0100)] 
[SCSI] aic7xxx: Update aicasm

This patchset updates aicasm code with the latest fixes from adaptec.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: fix compile
James Bottomley [Sun, 29 Jan 2006 18:10:24 +0000 (12:10 -0600)] 
[SCSI] fusion: fix compile

The prior fusion patches moved an invocation of a function,
mptscsih_TMHandler(), static to mptscsih.c into mptsas.c

Make the function unstatic, move the header to mptscsih.h and export it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: bump version
Moore, Eric [Thu, 26 Jan 2006 01:05:21 +0000 (18:05 -0700)] 
[SCSI] fusion: bump version

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: FC rport code fixes
Michael Reed [Thu, 26 Jan 2006 01:05:18 +0000 (18:05 -0700)] 
[SCSI] fusion: FC rport code fixes

This fix's problems with recent fc submission regarding
i/o being redirected to the wrong target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: move sas persistent event handling over to the mptsas module
Moore, Eric [Thu, 26 Jan 2006 01:05:15 +0000 (18:05 -0700)] 
[SCSI] fusion: move sas persistent event handling over to the mptsas module

This moves code intented for SAS from
the generic mptscsih module over to the
mptsas module.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: target reset when drive is being removed
Moore, Eric [Thu, 26 Jan 2006 01:05:12 +0000 (18:05 -0700)] 
[SCSI] fusion: target reset when drive is being removed

The issuing of the target reset
used in device hot removal case so the
firmware queue is flushed out off outstanding
commands.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] fusion: add support for raid hot add/del support
Moore, Eric [Thu, 26 Jan 2006 23:20:06 +0000 (16:20 -0700)] 
[SCSI] fusion: add support for raid hot add/del support

RAID event support.

This will hot add and remove raid volumes
when managment application creates and
deletes the volumes.  The driver is basically
responding to firmware asyn events, and reporting
the changes to the above layers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years ago[SCSI] scsi_transport_sas.c: display port identifier
Moore, Eric [Thu, 26 Jan 2006 23:20:02 +0000 (16:20 -0700)] 
[SCSI] scsi_transport_sas.c: display port identifier

This patch displays the port identifier on
the folder attribute; located in the middle digit.

/sys/class/sas_rphy/rphy-%x:%x:%x

The port identifier is basically the unique identifier
for each sas domain.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Tue, 31 Jan 2006 19:31:54 +0000 (11:31 -0800)] 
Merge master.kernel.org:/home/rmk/linux-2.6-serial

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 31 Jan 2006 19:31:02 +0000 (11:31 -0800)] 
Merge master.kernel.org:/home/rmk/linux-2.6-arm

18 years ago[PATCH] rcu_torture_lock deadlock fix
Ingo Molnar [Wed, 25 Jan 2006 18:50:12 +0000 (19:50 +0100)] 
[PATCH] rcu_torture_lock deadlock fix

rcu_torture_lock is used in a softirq-unsafe manner, but it is also
taken by rcu_torture_cb(), which may execute in softirq-context,
resulting in potential deadlocks.

The fix is to acquire rcu_torture_lock in a softirq-safe manner.  With
this fix applied, the rcu-torture code passes validation.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fix deadlock in drivers/pci/msi.c
Ingo Molnar [Thu, 26 Jan 2006 00:42:11 +0000 (01:42 +0100)] 
[PATCH] fix deadlock in drivers/pci/msi.c

The lock validator caught another one: drivers/pci/msi.c is accessing
&irq_desc[i].lock with interrupts enabled (!).

The fix is to disable interrupts properly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fix uidhash_lock <-> RCU deadlock
Ingo Molnar [Wed, 25 Jan 2006 14:23:07 +0000 (15:23 +0100)] 
[PATCH] fix uidhash_lock <-> RCU deadlock

RCU task-struct freeing can call free_uid(), which is taking
uidhash_lock - while other users of uidhash_lock are softirq-unsafe.

The fix is to always take the uidhash_spinlock in a softirq-safe manner.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Tue, 31 Jan 2006 19:22:40 +0000 (11:22 -0800)] 
Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

18 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 31 Jan 2006 18:29:35 +0000 (10:29 -0800)] 
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

18 years ago[PATCH] Fix boot-time slowdown for measure_migration_cost
Ingo Molnar [Mon, 30 Jan 2006 19:24:38 +0000 (20:24 +0100)] 
[PATCH] Fix boot-time slowdown for measure_migration_cost

This reduces the amount of time the migration cost calculations cost
during bootup. Based on numbers by Tony Luck <tony.luck@intel.com>.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 31 Jan 2006 18:21:13 +0000 (10:21 -0800)] 
Merge /pub/scm/linux/kernel/git/davem/net-2.6